automated system for control of freight flows. advantage of the system high accuracy of weight...
TRANSCRIPT
Automated system for control of freight flows
Advantage of the system
High accuracy of weight measuring
The maximum precise information about material handling, furnace loading and metal pouring in forms.
Automated registration of load parameters
Considerable reduction of human element influence on registration, direct information entering of load to the informational system.
Telemetric data communications via radio channel
Opportunity of stock-taking in any place of manufacturing areas without additional communication lines.
Integration with the enterprise database Timely data transmission/passing for planning, stock-taking and control of manufacture.
Control at every stageWarehouse of raw
materialsManufacture Warehouse of finished
products
Weighing of incoming and shipped for
manufacture raw materials
Weighing of incoming raw materials and shipped products
Weighing of incoming and shipped products
Information system
Reports, balance, analysis, book-keeping
Scales Terminal Computer
Enterprise information system
Current weigh
Scales control Task, lists
Reports
Railway scales
Car scales
Platform scales
Crane scales
Embedded scales
Handheld terminal
Stationary terminal
Area of weight measuring
Information about load weight goes into remote control terminal, where weight of load and recorded data are registered and transmitted to the information system via computer.
Railway scales
weight: 21760 kg
New report
carriage number: 37892365_
OK
Carriage weight
2. Automated registration of carriage weight, input of carriage number manually, by selecting from list or automatically.
3. Storing of created report in the memory of remote control terminal and the following transmission in the information system of manufacture.
1. Weighing of carriage.
Stationary remote control terminal
Car scales
weight : 9540 kg
New report
car number : К379ТА-54_
OK
Car weight
2. Automated registration of car weight, input of car number manually, by selecting from list or automatically.
3. Storing of created report in the memory of remote control terminal and the following transmission in the information system of manufacture.
1. Weighing of car.
Stationary remote control terminal
Platform scales
weight: 6930 kg
New report
load: charge_
OK
Load weight
2. Automated registration of load weight, input of load code manually or by selecting from list.
3. Storing of created report in the memory of remote control terminal and the following transmission in the information system of manufacture.
1. Weighing of load.
Stationary remote control terminal
1. Weighing and weight data transmission via radio channel.
weight: 4530 kg
New report
load code: steel 3_
OK
2. Automated registration of weight, input of load code manually or by selecting from list.
3. Storing of created report in the memory of remote control terminal and the following transmission in the information system of manufacture via radio channel.
Crane scales
Handheld remote control terminal
Load weight
1. Weighing and weight data transmission via radio channel.
weight: 37800 kg
New report
load code: steel 3_
OK
2. Automated registration of weight, input of load code manually or by selecting from list.
Weigh larry car, teeming ladle car
3. Storing of created report in the memory of remote control terminal and the following transmission in the information system of manufacture via radio channel.
Handheld remote control terminal
Load weight
Embedded scale
Weight: 63200 kg
New report
Code: Steel 3_
OK
Load weight
2. Registration of load:
input of load number by hand or from list.
3. Storing of created report in the memory of remote control terminal and the following transmission in the information system of manufacture.
1. Weighing of load
Stationary remote control terminal in the crane-operator’s cab
Output data
Reports
Reports about interplant and outside shifts of materials. Analysis and optimization of losses during material treatments.
Monitoring
Transmitting information about incoming, keeping and treating materials to section foreman in real time. Quality control of produced metals. Workload optimization of carriers.
Integration
Transmitting of freight flow data to information system of manufacture. Integration with book-keeping systems.
Effect of our system
Timely and full information
Transmitting of information about interplant and outside freight flows in real time. Optimization of material allocation in stock.
Precision of stock-taking and batching
Precise stock-taking is improved through the use of modern electronic measurement devices. The quality of produced metals is improved through the precise batching.
Cost reduction
The costs of manufacture are reduced through precise stock-taken of incoming and shipped metals.
Integration with information system of manufacture
Transmitting of valid data for the information system of manufacture including book-keeping system.
Industrial equipment and automated systems
InterVes LtdNovosibirsk, 630058, Office 232, Russkaya street, 39
P/fax: +7 (383) 332-29-41E-mail: [email protected]
www.interves.ru