attachment 3 measures for managing and applying for licenses

Measures for Managing Safety Tool LicensesFor Internal

Use Only

Measures for Managing Safety Tool Licenses

This document describes the information related to the safety tool licenses and helps

related personnel to obtain the licenses. The intended audiences of this document are

version coordinators of different product lines and technical support staff who install the

safety tools on site.

Safety tool licenses are the property of the Security Department. The Security

Department issues all the safety tool licenses.

Xu Yuankun (ID: 43202) is the coordinator for temporary licenses for the testing and

verification purposes. The validity period of temporary licenses is around 30 days.

Zhang Qiuting (ID: 40998) is the coordinator for official licenses. The validity of

official licenses is longer than three years.

If you want to apply for a license directly, skip to section 3 "Procedure for Applying

for a Safety Tool License."

1 Principle of Safety Tool Licenses

A safety tool license is verified and controlled in the signature mode by using

asymmetric keys. A secret key is used for signing and a public key is used for

verification.

An official license is a verification file signed by a secret key.

A safety tool contains a public key. When starting the tool, first check the integrity of

the license file using the public key.

After checking the integrity, check the identity of the machine.

Then, check the validity period of the software.

2008-06-20 HUAWEI Confidential Page1, Total 8


Use Only

2 Characteristics of Safety Tool Licenses

Integrity check ensures that a license cannot be tampered. A license file becomes

invalid if altered. This prevents different products from using the same license.

Identity check ensures that a machine cannot be illegally installed. Every official

license file is bound to the fingerprint for a machine. That is, a license file can be used

only in one machine. This prevents a license file from being repeatedly used.

Validity period check ensures that the software cannot be illegally used. An official

license file has a validity period. This prevents an official license from being used after

the validity period expires.

Note that the validity period of a safety tool is an absolute time segment instead of a

relative time segment. This time segment is controlled by an effective date and a number

of valid days. For example, the effective date of a license is 2005-09-01 and the validity

period is 30 days. The license is valid from 2005-09-01 to 2005-09-31. The license is

invalid before or after this time segment. The validity period does not begin from the date

when the tool is installed.

In a word, safety tool licenses are strictly controlled and cannot be used without

authorization.

3 Procedure for Applying for a Safety Tool License

The official licenses of safety tools are controlled by the CMO Department. The

coordinator is Zhang Qiuting (ID: 40998). Temporary licenses for the testing and


Start Check the machine identityCheck the integrity Check the validity period of the software

Run properlyExit

Fail Fail Fail


Use Only

verification purposes are controlled by the R&D Department. The coordinator is Xu

Yuankun (ID: 43202).

3.1 Preparations

Make sure that the tool is installed and useable before applying for an official

license. If the tool is installed for the first time, only a temporary license file whose validity

period is shorter than 30 days is available.

Note:

If a message indicating the expiry of the validity period is displayed after the tool is installed, the

license file provided with the software expires. Please apply for a temporary license first.

To apply for a temporary license, send the name and version number of the relevant software to Xu

Yuankun.

3.2 Obtaining the Version Number

Record the version number of the safety tool. Fill in the correct version number when

you apply for a license; otherwise, the license file you obtain is unusable.

Mapping between the names and versions of the safety tools

Name Feature Version

i3SAFE SIS SetSolaris-AF1SISS03

Customizing in

Solaris SIS V100R002SOLB019

i3SAFE SIS SetWin2000-AF1SISS01

Customizing in

Windows 2000 SIS V100R002C21B013

i3SAFE SIS SetWin98-AF1SISS02

Customizing in


i3SAFE SIS SysPatron2000-AF1SISS07

Protective in


i3SAFE SIS SysPatron98-AF1SISS08

Protective in


3.3 Obtaining the User ID

After installation, a user ID that is bound to the host is generated, as shown in the

following figure.



Use Only

Record the user ID, which can be used to apply for an official license file.

3.4 Applying for an Official License File Through the Notes Workflow

Note:

The R&D database where the Notes workflow is located is independent of other databases. Thus,

on-site customer service staff and other people who are unable to access the R&D database cannot

apply for a license.

To solve this problem, do as follows:

1. Entrust a person who has the access to the R&D database to apply for the

license.

2. Fill in the following table (example) and send the table to the person-in-charge

to apply for the license.

Applicant Product

Line

Product Version in

Use

Office Version

Applied for

USER ID

Bai

Juan

Wireless

Product Line

i3SAFE

SIS

SetWin20

00

V100R002C

21B013

Test V100R002C

21B013

3.4.1 Opening the LIB Application Database in the Notes Database

1. Right-click the workstation and select Open Database from the pop-up menu, as



Use Only

shown in the following figure.

2. In the Open Database dialog box, select szxap39-ds/Servers/huawei from the

Server drop-down list; select 平台LIB库申请 from the Database list box, as

shown in the following figure.

3. Click Open to access the database, as shown in the following figure.


q00125393, 08年6月20日,

无英文


Use Only

3.4.2 Creating an LIB Application in the Database

1. Click New Application to create an application.

2. In the created application form, fill the details about the current product and the

relevant product line in the information of applied product column. Do not fill in

the information about the requested LIB.

3. In the Purpose for the application column, fill in the information about the

destination office to facilitate future maintenance and user support, as shown in

the following figure.

4. In the Information of Requested LIB column, click the button in the Product Line

of platform column and make selections in the displayed dialog box, as shown in

the following figure.



Use Only

5. Click the button in the Detailed version NO. column; select the version number of

the software you apply for from the displayed list, for example,

SISV100R002C21B013, as shown in the following figure.

6. In the Remark column, fill in the destination user IDs. A license file corresponding

to each user ID is generated, as shown in the following figure.

Note:

All generated license files are named license.dat. If you apply for multiple licenses, identify the

user IDs that correspond to different hosts. In this way, each license file can correspond to a user ID.



Use Only

7. Click Submit.

3.5 Overwriting the Original Temporary License File with an Official License File

Upgrading to an official version is successful if no version message is displayed after

you restart the safety tool.

3.6 Application Process

4 Appendix: Obtaining Safety Tools

You can obtain the safety tools from the FTP directory of Data Communication. Zhou

Qiuping (ID: 17925) is in charge of the maintenance of Data Communication FTP. The

path and password are shown as follows. If changes occur, please contact the person in

charge of FTP maintenance.

Path:

yf-ftp://e:/apps/数据通信产品软件包/软件目录/01.华为产品/61.i3SAFE系列/Numen/

Account information:

Reader User: pub_data_dl Password: sjtx0308


Install Fill in the LIB applicationGenerate a user ID Generate an official license file

Send the file to the applicantOverwrite the original temporary

license file

Restart the safety tool

attachment 3 measures for managing and applying for licenses

Technology