atdec awm series · atdec awm series page 2 of 18 standard product system diagram important note:...

Atdec AWM Series of 18

Technical Specification

Atdec AWM SeriesIndex

ArmsAWM-A13 Overview Page 4AWM-A46 Dimensions Page 5AWM-A71 Height Adjustment on Posts Page 6

Height Adjustment on Wall Channels Page 7

HeadsAWM-HV VESA Head Dimensions Page 3SNTB Notebook Holder Page 3

Dynamic ArmsAWM-AD Overview Page 8AWM-LD Dimensions Page 9

Dimensions on Post Page 10Height Adjustment on Posts Page 11Height Adjustment on Wall Channels Page 12

FixingsAWM-FB Bolt Through Kit Dimensions Page 15AWM-FC C Clamp Dimensions Page 15AWM-FF F Clamp Dimensions Page 16AWM-FH Heavy Duty F Clamp Dimensions Page 16AWM-WS Slat Wall Adaptor Dimensions Page 17

Posts

Dimensions Page 13AWM-P13AWM-P40AWM-P75

Wall ChannelsDimensions Page 14AWM-W6

AWM-W35

AccessoriesAPM01 Power Module Page 18AC-MP Mini PC Mount Plate Page 18AC-GC Grommet Clamp Page 18

Standard Product System Diagram Page 2


STANDARD PRODUCT SYSTEM DIAGRAM

Important Note:1. Any mounting surface must be capable of supporting the combined weight of all products, including attached screens and devices.2. Ensure that your monitor solution is rated to support the combined weight of all products, including attached screens and devices.3. All fixings are sold separately.4. Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.

ARMS

INTERFACE LINKS

Dynamic ArmAWM-AD

Arm Channel ClampAWM-LC

Arm BaseAWM-LB

130 ArmAWM-A13

460 ArmAWM-A46

710 ArmAWM-A71

400 PostAWM-P40

135 PostAWM-P13

750 PostAWM-P75

C Clamp

AWM-FC

Bolt Through Kit

AWM-FB

Grommet ClampAC-GC

Slat WallAdaptor

AWM-WS

FIXINGS

POSTS WALL CHANNELS

Heavy DutyF ClampAWM-FH

60 WallChannel

AWM-W6

350 WallChannel

AWM-W35

F Clamp

AWM-FF

Notebook TraySNTB

HEADS

Mini PCMount Plate

AC-MP

ACCESSORIES

Power Module

APM01


HEADS

Important Note:1. All arms are supplied with the VESA Head - AWM-HV (unless specified otherwise)2. Other accessories are sold separately.

Important Note:1. Maximum weight load 8kg (17.6 lbs).2. Ensure solution is rated to support combined weight of all products and attached screens/devices.3. 10 years limited warranty.4. For further details refer to the Notebook Tray - SNTB Technical Specifications document.

Dimensions

VESA Head AWM-HV

115mm(4.53”)

4.5mm(0.18”)

Ø4.5mm(0.18”)

115mm(4.53”)

100mm(3.94”)

75mm(2.95”)

Notebook Tray SNTB


ARMS OVERVIEW

Important Note:The rotation at the clamp can be reduced to 180� by using the rotation limiter ring. See product installation guide for instructions.

130 Arm AWM-A13

460 Arm AWM-A46

710 Arm AWM-A71

Pan MovementMAX 360°/180°

MonitorRotation360°

PanMovement

360°

Joint MovementMAX 360°/180°

JointMovement

360°


Joint MovementMAX 360°/180°

JointMovement

360°

PanMovement

360°


Tilt Angle

45°

25°

Tilt Angle

Tilt Angle

45°

25°

45°

25°

Weight

Weight

Weight

Flat Monitors0 - 12kg (0 - 26.5lbs)

Curved Monitors 0 - 8kg (0 - 17.6lbs)

Flat Monitors0 - 12kg (0 - 26.5lbs)


Flat Monitors0 - 9kg (0 - 20lbs)



Post Front Attachment

Post Front Attachment

Wall Channel

Wall Channel

128mm(5.04”)

50mm(1.97”)

78mm(3.07”)

56mm(2.2”)

234mm(9.21”)

70mm(2.76”)

56mm(2.2”)

359mm(14.13”)

70mm(2.76”)

56mm(2.2”)

Post Side Attachment

Note: Shown at minimum extension

Note: Shown at minimum extension

Post Side Attachment

160mm(6.30”)

160mm(6.30”)

60mm(2.36”)

78mm(3.07”)

MIN.124mm(4.88”)

MAX.458mm(18.03”)

50mm(1.97”)

MIN.114mm(4.48”)

MAX.448mm(17.63”)

60mm(2.36”)

78mm(3.07”)

285mm(11.22”)

285mm(11.22”)

MIN.124mm(4.88”)

MAX.708mm(27.87”)

50mm(1.97”)

MIN.114mm(4.48”)

MAX.698mm(27.48”)

ARMS DIMENSIONS

130 Arm AWM-A13

460 Arm AWM-A46

710 Arm AWM-A71

Post Front Attachment Wall ChannelPost Side Attachment

78mm(3.07”)

60mm(2.36”)


MINMAX(R)

(R)

MINMAX

(R)

MINMAX

(R)

MIN

MAX

(R)

MIN

MAX

(R)

MIN

MAX

(R)

MIN

MAX

(R)

MIN

MAX

(R)

MIN

MAX

MIN HEIGHTMAX HEIGHTRANGE (R)








110mm (4.33”)163mm (6.42”) 53mm (2.09”)

233mm (9.17”)286mm (11.26”) 53mm (2.09”)

230mm (9.06”)283mm (11.14”) 53mm (2.09”)

230mm (9.06”)548mm (21.57”) 318mm (12.52”)

230mm (9.06”)898mm (35.35”) 668mm (26.3”)

233mm (9.17”)551mm (21.69”) 318mm (12.52”)

233mm (9.17”)901mm (35.47”) 668mm (26.3”)

110mm (4.33”)778mm (30.63”) 668mm (26.3”)


110mm (4.33”)428mm (16.85”) 318mm (12.52”)

ARMS HEIGHT ADJUSTMENT ON POSTS

130 Arm AWM-A13 on Post

135 Post AWM-P13

135 Post AWM-P13

135 Post AWM-P13

400 Post AWM-P40

400 Post AWM-P40

400 Post AWM-P40

750 Post AWM-P75

750 Post AWM-P75

750 Post AWM-P75



Important Note:Measurements taken from centre of VESA mount.The C Clamp (AWM-FC) increases the minimum height by 26mm.


ARMS HEIGHT ADJUSTMENT ON WALL CHANNELS

130 Arm AWM-A13 on Wall Channel

60 Wall Channel AWM-W6








MAX

MAX

MIN

MAX

MAX

MIN

MAX

MAX

MIN

FIXED HEIGHT

FIXED HEIGHT

FIXED HEIGHT

MIN HEIGHTMAX HEIGHTRANGE



92mm (3.62”)

224mm (8.82”)

221mm (8.7”)

224mm (8.82”)514mm (20.24“)290mm (11.42”)

221mm (8.7”)511mm (20.12“)290mm (11.42”)

92mm (3.62”)382mm (15.04”)290mm (11.42”)

Important Note:Measurements taken from bottom of wall channel to centre of VESA mount.


MAX 360°/180°

360°

Pan Angle180°

360°

Pan Angle180°

30°

40°

DYNAMIC ARMS OVERVIEW

Tilt Angle

Weight

45°

25°

Tilt Angle

45°

25°

MAX 360°/180°

360°

Pan Angle180°

Pan Angle180°

30°

40°

360°

MAX 360°/180°

Pan Angle180°

360°

30°

40°

Pan Angle180°

Tilt Angle

45°

25°

Important Note:The rotation at the clamp can be reduced to 180� by using the rotation limiter ring. See product installation guide for instructions.

Dynamic Arm AWM-AD with Arm Base AWM-LB

Dynamic Arm AWM-AD with Channel Clamp AWM-LC

Dynamic Link AWM-LD with Channel Clamp AWM-LC



Weight

Weight






275mm(10.83”)

34mm

252mm

(1.34”)

(9.92”)

330mm(13.0”)

286mm(11.26”)

366mm(14.41”)

315mm(12.40”)

170mm(6.69”)

145mm(5.71”)

110mm(4.33”)

197mm(7.76”)

82mm(3.23”)

92mm(3.62”)

275mm(10.83”)

92mm(3.62”)

34mm(1.34”)

330mm(13.0”)

286mm(11.26”)

366mm(14.41”)

315mm(12.40”)

170mm(6.69”)

145mm(5.71”)

80mm(3.15”)

175mm(6.89”)

60mm(2.36”)

275mm(10.83”)

92mm(3.62”)

34mm

252mm

(1.34”)

(9.92”)

330mm(13.0”)

286mm(11.26”)

366mm(14.41”)

315mm(12.40”)

170mm(6.69”)

145mm(5.71”)

114mm(4.49”)

197mm(7.76”)

48mm(1.89”)

DYNAMIC ARMS DIMENSIONS





Wall Channel

Wall Channel

Post - Side Channel

Post - Side Channel

Post - Front Channel

Post - Front Channel

MAX618mm(24.33”)

MIN67mm(2.64”)

62mm(2.44”)

315mm(12.4”)

MIN112mm(4.41”)

MAX426mm(16.77”)

56mm(2.44”)

315mm(12.4”)

MAX366mm(14.41”)

MIN52mm(2.05”)

315mm(12.4”)

MIN102mm(4.01”)

MAX416mm(16.38”)

DYNAMIC ARMS DIMENSIONS ON POSTS & WALL CHANNELS


MAX678mm(26.69”)

MIN90mm(3.54”)

62mm(2.44”)

MAX618mm(24.33”)

MIN94mm(3.7”)

62mm(2.44”)

MAX668mm(26.3”)

MIN80mm(3.15”)

62mm(2.44”)




DYNAMIC ARMS HEIGHT ADJUSTMENT ON POST

132mm (5.2”)500mm (19.68”) 368mm (14.49”)

58mm (2.28”)390mm (15.35”) 332mm (13.07”)

58mm (2.28”)655mm (25.79”) 597mm (23.5”)

58mm (2.28”)1005mm (39.57”) 947mm (37.28”)

132mm (5.2”)765mm (30.12”) 633mm (24.92”)

132mm (5.2”)1115mm (43.9”) 983mm (38.7”)

MIN HEIGHTMAX HEIGHT RANGE (R)






400 Post AWM-P40

400 Post AWM-P40

750 Post AWM-P75

750 Post AWM-P75

135 Post AWM-P13

135 Post AWM-P13

(R)

MAX

MIN

MAX

MIN

(R)

MAX

MIN

(R)

(R)

MAX

MIN

(R)

MAX

MIN

(R)

MAX

MIN



Important Note:Measurements taken from centre of VESA mount.The C Clamp (AWM-FC) increases the minimum height by 26mm.


DYNAMIC ARMS HEIGHT ADJUSTMENT ON WALL CHANNEL





MIN

MAX

MAX

MIN

MIN

MAX

MAX

MIN

115mm (4.53”)430mm (16.93”) 315mm (12.4”)

5mm (0.2”)618mm (24.01”) 613mm (23.82”)

115mm (4.53”)728mm (28.35”) 613mm (23.82”)

5mm (0.2”)320mm (12.6”) 315mm (12.4”)







Important Note:Measurements taken from bottom of wall channel to centre of VESA mount.


POST DIMENSIONS

TotalHeight756mm(29.76”)

ChannelHeight750mm(29.53”)


ChannelHeight

400mm(15.75”)



135 PostAWM-P13

400 PostAWM-P40

750 PostAWM-P75

Compatible Fixings:

• Bolt Through Kit• C Clamp• F Clamp• HD F Clamp• Grommet Clamp

Compatible Fixings:

• Bolt Through Kit• C Clamp• F Clamp• HD F Clamp• Grommet Clamp

Compatible Fixings:

• Bolt Through Kit• HD F Clamp• Grommet Clamp

AWM-FBAWM-FCAWM-FFAWM-FHAC-GC

AWM-FBAWM-FCAWM-FFAWM-FHAC-GC

AWM-FBAWM-FHAC-GC

OPTIONALCable Cover

20mm(0.79”)

51.5mm(2.03”)

25.8mm(1.01”)

16mm(2.03”)

16mm(2.03”)

21.8mm(0.86”)

43.5mm(1.17”)

Top View


WALL CHANNEL DIMENSIONS

Top View

60 Wall ChannelAWM-W6

350 Wall ChannelAWM-W35

60mm(2.36”) 16.5mm

(0.65”)

CountersunkHole InternalDiameterØ6.5mm (0.26”)



40mm(1.57”)

CountersunkHole InternalDiameterØ6.5mm (0.26”)

145mm(5.71”)

145mm(5.71”)

39mm(1.54”)




FIXINGS

Important Note:1. Any mounting surface must be capable of supporting the combined weight of all products and attached screens/devices. 2. Ensure that your monitor solution is rated to support the combined weight of all products and attached screens/devices.3. All fixings are sold separately.

Post Installation

Arm Base (3 washer)Installation

Top View

Worksurface Thickness

Bolt Through Kit AWM-FB

53mm(2.09”)

63mm(2.48”)

14mm(0.55”)53mm

(2.09”)

3mm(0.12”)

4mm(0.16”)

8mm(0.31”)53mm

(2.09”)

POST ARM BASE

0 - 33mm(0 - 1.3”)

15 - 33mm(0.59 - 1.3”)


C Clamp AWM-FC

Dimensions

96mm(3.78”)

85mm(3.35”)

98mm(3.86”)

26mm(1”)

27mm(1.06”)

20mm(0.79”)

24mm(0.94”)

6mm(0.24”)

85mm(3.35”)

51mm(2”)

POST/BASE MOUNTING POINTS

REAR EDGE OF DESK

DEFAULT INVERTED

RANGE 18-33mm (0.71 - 1.3”)

25 - 33mm (0.98 - 1.3”)

18 - 25.8mm (0.71”-1.0”)


Dimensions

90mm(3.54”)

118mm(4.65”)

112mm(4.41”)

66mm(2.6”)

75mm(2.95”)

64mm(2.52”)

8mm(0.31”)

51mm(2”)

Heavy Duty F Clamp AWM-FH


TOP MIDDLE

RANGE 0-68mm (0-2.68”)

BOTTOM

0 - 38mm (0 - 1.5”)

11-53mm (0.43”-2.09”)

25-68mm (0.98”-2.68”)

8mm(0.31”)

82mm(3.23”)

51mm(2”)

96mm(3.78”)

145mm(5.71”)

Inverted positionlower clamp

55mm(2.17”)

55mm(2.17”)

66mm(2.6”)

15mm(0.59”)

F Clamp AWM-FF


Dimensions

DEFAULT INVERTED

0 - 36mm(0 - 1.42”)

36 - 79mm(1.42 - 3.11”)

RANGE 0-79mm (0 - 3.11”)


MIN PITCH 36mm (1.42”)MAX PITCH 78mm (3.07”)

Dimensions

25.5mm(1”)

7mm(0.27”)

34mm(1.34”)

83mm(3.27”)

76mm(3”)

40mm(1.57”)

21.5mm(0.85”)

MIN MAX

Slat Wall Adaptor AWM-WS with 60 Wall Channel AWM-W6 (sold separately)

Slat Wall Groove Pitch


ACCESSORIES

Power Module APM01

Important Note:1. The Power Module is compatible with all AWM fixings.2. The Power Module is compatible with standard devices such as: - Apple iPhone, iPad - Android devices - Samsung tablets - Blackberry devices - Windows devices - Most other common USB-compatible charging devices not listed here 3. 12 months limited warranty4. For further details refer to the Power Module - APM01 Technical Specifications document.

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20191024A

Grommet Clamp AC-GC

Important Note:1. The Grommet Clamp fixing is compatible with AWM Series Post and Base products.2. Ensure the overall solution is rated to support the combined weight of all products and

attached screens/devices.3. For further details refer to the Grommet Clamp Technical Specifications document.

Mini PC Mount Plate AC-MP

Important Note:1. Maximum weight load 5kg (11 lbs).2. The Mini PC Mount Plate is compatible with all AWM Post and Wall Channel products.3. The Mounting Plate can be placed at any height on the Post or Wall Channel as desired.4. Compatible with Intel NUC® devices and VESA 75x75mm and 100x100mm hole pattern compliant

devices.5. Slots allow mounting of NUCs with both 84 and 95mm mounting hole spacings.6. Ensure solution is rated to support combined weight of all products and attached screens/devices.7. 10 years limited warranty (parts and workmanship).8. For further details refer to the Mini PC Mount Plate - AC-MP Technical Specifications document.

atdec awm series · atdec awm series page 2 of 18 standard product system diagram important note:...

Documents