Johns Manville is leading the developmentof new technologies by ushering in a newera of roofing systems. The science behindour materials and products is extensive.Working in partnership with our customers,our research and new product develop-ment teams are challenged to invent newand innovative technologies that cost-effectively increase the performance of our customers’ commercial/ industrial roofing systems.

The Johns Manville Technical Center inLittleton, Colorado, is one of the best-equipped research facilities in the country,with extensive research capabilities in structural, chemical, mechanical and thermal analyses. Here, JM scientists andengineers test and develop products tofind technology-based solutions for specific product needs.

Johns Manville also strongly supports thedevelopment of “cool roof” technology.From manufacturing to installation anduse, JM single ply membranes, for example, are environmentally sound andrepresent an excellent choice with highenergy efficiency for owners. Other scientific advancements, particularly in thearea of cold-application technology, arecoming to fruition as well.

At Johns Manville, Scientific Advances are Producing Better System Performance,

Easier Installations, Greater Energy Efficiency and More Environmentally Smart Applications.

2

Table of Contents

Introduction 2

Modified Bitumen Roofing Systems

SBS Systems 4

APP Systems 6

Built-Up Roofing Systems 7

Single Ply Roofing Systems

JM TPO and JM PVC Systems 8

JM EPDM Systems 9

Roof Insulation Products

Thermal 10

Roof Board 10

Composites 12

Design Engineering 13

Tapered Products 13

Specialty Roofing Products 14

Guarantees and Contractor Programs 15

To access data on JM Roofing Systems, visit our Web site at www.jm.com.

Tested and Proven Total Solutions for Every

Roofing Need.

Many important questions must beanswered before selecting the type of roof-ing system and the proper roofing materialsfor any given project. What are the climaticconditions? Is reflectivity an important consideration? Could wind uplift be a problem? To what type of roof decking willthe system be applied? What is the roof’sslope? What thermal efficiency is required?What fire rating is necessary? What is thedesired life expectancy for the roofing sys-tem? What type of guarantee is needed?And, of course, how much can the ownerafford to invest in the roofing system?Whatever the answers, you can count onJohns Manville to provide the mostadvanced and comprehensive solution.

As a part of the Berkshire Hathaway group of companies, Johns Manville has theresources to continually outpace our com-petitors in developing state-of-the-art roofingsystems. While our customers are being

faced with higher energy expenses, morestringent environmental and building codesand greater demands to reduce costs, JM continues to develop technologies toaddress issues, solve problems and createtotal system solutions for every need.

33

SBS Modified Bitumen SystemsJohns Manville has been producing qualitySBS (styrene-butadiene-styrene) productssince 1986. SBS products are comprised of areinforcement of either fiber glass, polyesteror a combination of both. SBS is a rubber-ized modifier that increases the overall per-formance of the sheet by providing superiorelongation and recovery characteristics.

SBS modifiers extend the service range ofthe product so it can be handled in coolertemperatures without cracking or shattering,or in warmer temperatures without soften-ing to the point where it begins to flow. In allinstances, high performance prevails.

Reinforcements also play a key role in performance. Since the inception of modifiedbitumen products, several reinforcementshave entered into the JM SBS line, each targeting specific performance needs.

Fiber glass reinforcements offer tensilestrength and dimensional stability requiredfor rooftops with heavy traffic areas.

Polyester mats deliver superior tear strengthand puncture resistance, and can handlecontinual stress created by rooftop movement.

For ultimate tensile strength, dimensionalstability and puncture resistance, JM offers acomposite reinforcement that combines thestrength of fiber glass with the flexibility ofpolyester. It provides durability and affordsbetter natural resistance to other factors thataffect roof performance.

SBS Products

DynaBase® and DynaWeld™ Base are glassreinforced base sheets generally used as abase ply in multiple-ply SBS systems. MeetsASTM D 6163, Type I, Grade S.

DynaGlas®, DynaGlas® FR, DynaGlas® 30 FR

and DynaWeld™ Cap FR are fiber glass reinforced, granule-surfaced modified capsheets used in multiple-ply roofing systems. FR designates the added benefitof a fire-retardant formulation. MeetsASTM D 6163, Type I, Grade G.

DynaKap™ and DynaKap™ FR are compositereinforced cap sheets used in multiple-plyroof systems where the benefits of bothfiber glass and polyester reinforcement aredesired. DynaKap FR contains a flame-retardant additive. Meets ASTM D 6162,Type II, Grade G.

DynaPly® is a composite reinforced sheetgenerally used as a base or intermediatesheet in multiple-ply systems. Meets ASTMD 6162, Type II, Grade S.

DynaLastic® 180 and DynaLastic® 180 FR arepolyester reinforced, granule-surfaced capsheets generally used as finish plies in multiple-ply roof systems. DynaLastic 180 FRhas a flame-retardant formulation. MeetsASTM D 6164, Type I, Grade G.

4

Bringing the Latest Technology to Modified Bitumen Systems.

Two-ply, cold process, modified bitumen, mineral-surfaced roofing system. For use

over JM insulation, approved decks, or other approved insulations on

inclines up to 3 in. per foot (250 mm/m).

Two-ply, self-adhered, modified bitumen, roofingsystem. For use over JM insulation, approved

decks or other approved insulations on inclines up to 3 in. per foot (250 mm/m).

JMCleanBondCap Sheet

JMCleanBond Base Sheet

ENRGY 3 PolyisocyanurateRoof Insulation

Invinsa Roof BoardMechanically Attached

JM-Approved Fasteners

Deck

5DynaLastic® 180 S is a polyester reinforcedbase sheet. It also can be used as a top sheetin a multiple-ply system, but additional surface treatment is required. Meets ASTM D6164, Type I, Grade S.

DynaLastic® 250 and DynaLastic® 250 FR alsoare polyester reinforced, granule-surfaced capsheets, but with thicker reinforcement foradded tensile strength and puncture resist-ance. Again, the FR denotes that a flame-retar-dant additive is present. Meets ASTM D 6164,Type II, Grade G.

DynaFlex™ is a granule-surfaced, compositereinforced fiber glass and polyester sheet usedas a premium flashing material for modifiedbitumen and BUR systems. Meets ASTM D6221, Type I.

DynaClad™ is a glass reinforced cap sheet withan embossed aluminum foil cover layer toreplace granules. Offers great reflectivity anddurability. Meets ASTM D 6298.

DynaTred™ has a skid-resistant surface, making it a perfect walkway solution for hightraffic areas on the rooftop.

DynaGrip™ is a self-adhering SBS system withan easy-to-peel, removable release plastic film.This product line includes DynaGrip Cap,which is self-adhering on the bottom and pro-tected on the top by a durable granule surface.Base sheets are available with self-adheringsurfaces on both sides, or on one side or theother.

JMCleanBond® SBS Self-Adhering FireResistant System. JM’s installation system withasphalt-to-asphalt self-adhering technologyconsists of a mechanical and chemical bond.Its unique self-adhering bond makes installationcleaner, with minimal odor and heavy equip-ment, thereby reducing disruptions during nor-mal building operations. The system includes abase sheet, cap sheet, base and cap flashing,and a utility sheet.

Johns Manville Adhesive Line

MBR® Cold Application Adhesive is compatiblewith all JM SBS membranes that do not haveburn-off films. Excellent consistency for sprayor squeegee application methods.

MBR® Flashing Cement is a unique, two-com-ponent adhesive for use with all SBS modifiedbitumen membrane products without burn-offfilms.

MBR® Utility Cement is a ready-to-use, trowel-grade elastomeric adhesive for SBSmodified bitumen flashing products.

MBR® Bonding Adhesive is a pre-measured,easy-to-mix, two-part adhesive used for thosespecifications calling for adhesives containingno VOCs.

JM Two-Part Urethane Insulation Adhesive

(UIA) is a two-component polyurethane adhesive used for attaching insulation boardsto the roof deck or to other insulation boards.

APP Modified Bitumen SystemsLike our SBS products, our APP modifiedbitumen products provide high-tensilestrength while maintaining critical flexibility.However, through the scientifically advancedformulation, our APP membranes (coatedwith a proprietary blend of asphalt and atactic polypropylene) are more compatiblewith heat-welding application methods.

With APP, hot mopping is no longer necessary, because the bottom coating maybe heated to a point where it acts as its ownadhesive, bonding the sheet to a substrateand bonding the overlapping edges. Whileall our APP membranes are designed to beheat-welded, some may also be applied incold adhesive. These products have a sandbacking in lieu of the burn-off film oftenfound on the heat-welded products.

Many of the APP membranes have a factory-applied mineral surfacing (available incolors) and do not need further protectionfrom harmful UV rays. However, for variouspurposes, JM also provides smooth-surfacedAPP membranes. These membranes mustsubsequently be protected from UV rays byapplying a compatible roof coating.

Several products are available for varyingdegrees of strength, elasticity and flexibility.The following complete system componentlist shows the ASTM standard that applies toeach membrane. Membranes with brandnames designated “FR” also contain flame-retardant additives.

6

Heat-Welded Bitumen

Two-ply, heat-welded, modified bitumen, mineral-surfaced roofing system. For use

over JM insulation, approved decks or other approved insulations on inclines

up to 6 in. per foot (500 mm/m).

Granule-Surfaced Cap Sheets ASTM Standard*BICOR M FR** D 6223 Type II Grade GAPPeX 4.5M FR** D 6222 Type I Grade GAPPeX 4.5M** D 6222 Type I Grade G

Smooth-Surfaced Cap SheetsAPPeX 4S D 6222 Type I Grade S

Base SheetsAPP Base D 6509

*Material tested in accordance with ASTM D 5147 "Standard Test Methods for Sampling and Testing Bituminous Sheeting Material."

**Due to weatherability, durability and handling characteristics, may also be used as flashing material.

Built-Up Roofing SystemsConventional bituminous built-up roofing(BUR) membranes have been used effectively for more than 100 years and arestill popular today. With BUR roofing sys-tems, the waterproof membrane is field fab-ricated with layers of bitumen alternatingwith plies of reinforcing felts. JM manufac-tures a complete line of fiber glass feltsincluding base, ply and granule-surfaced capsheets.

Base Felts are available in three major types.The most popular and versatile base sheet isPermaPly® 28. Another type of base sheet,which incorporates a coating of rubber-mod-ified asphalt, is called GlasBase PlusTM. Alsoavailable is Ventsulation® Felt, which is primarily used as a venting base sheet forapplying a new built-up roof over an existingbituminous membrane that is no longerserviceable, or over lightweight insulatingconcrete substrates. Check the complete listof BUR system components to see which isbest suited for your use.

Ply felts are coated with high-grade, unfilledasphalt. Two types are available dependingon the ASTM Standard that needs to be met:GlasPly® Premier, with stronger tensilestrength and GlasPly® IV.

Cap sheets are fiber glass mats coated withfilled asphalt and surfaced with mineralgranules for applications where a granule-surfaced sheet is preferred rather thanadding a coating or gravel. GlasKap® CR is awhite mineral surfaced, white acrylic coated,fiber glass cap sheet for use in built-up roof-ing systems. The unique surfacing providesprotection to the underlying asphalt andmembrane, as well as the benefit of a reflec-tive, emissive surface that meets California

Title 24. GlasKap® and GlasKap® Plus are theother two products available.

Of course, various cements, coatings andsurfacings are available for a complete, single-source system. JM-approved asphaltis required for hot-applied BUR systems.

JM Built-Up Roofing Systems, Still the Best of the Tried and True.

Four-ply, gravel-surfaced, fiber glass built-up roof.For use over JM insulation, approved decks or other approved insulations, on inclines

up to 3 in. per foot (250 mm/m).

Ply Felts ASTM StandardGlasPly Premier D 2178 Type VIGlasPly IV D 2178 Type IV

Base SheetsGlasBase Plus D 4601 Type II Region 3 OnlyPermaPly 28 D 4601 Type IIVentsulation D 4897 Type II

Flashing and Cold Application SystemsGlasTite Flexible

Cap SheetsGlasKap CR D 3909GlasKap D 3909GlasKap Plus D 3909 Region 3 Only

Roofing CementsBestile Industrial Roof Cement D 4586 Type II

Roof Coatings and SurfacingsTopGard Type ATopGard Type B D 1227 Type IVFibrated Aluminum D 2824 Type III

PrimerConcrete Primer D 41

7

JM TPO and JM PVC Single Ply Roofing SystemsJM TPO and JM PVC roofing membraneshave provided an effective, weatherproofroofing alternative for two decades.

The formulation of our white JM TPO andJM PVC membranes has enabled JohnsManville to be a partner in theEnvironmental Protection Agency’s ENERGYSTAR® program. These highly reflective sur-faces help reduce electricity and natural gasconsumption when specified with ENRGY 3®

polyisocyanurate roofing insulation. Themembranes can also help minimize the“heat island”effect in metropolitan areas.Testing on white membranes showed initialreflectivity values of 86 percent, far exceed-ing ENERGY STAR’s guidelines.

JM TPO thermoplastic membrane systems are offered by JM for use in specific roofingapplications. Contact your JM representativeabout your requirements.

JM PVC is a flexible, thermoplastic mem-brane manufactured using an ultraviolet-resistant polyvinyl chloride and an Elvaloy®

KEE (ketone ethylene ester) formulation.

JM PVC membranes are reinforced with a non-wicking polyester fabric and provideexcellent weathering characteristics, hightensile strength and long-term flexibility.The membranes also have excellent resist-ance to harsh chemicals and industrial pol-lutants.

JM PVC Fleece-Backed Membranes have apolyester fleece embedded into the sheetthrough a molten film-extrusion process.They are available in 50 and 60 mil thick-nesses.

These membranes are composed of UV- andfire-resistant PVC (polyvinyl chloride) andare aesthetically pleasing and light in weight.They have excellent durability and dimen-sional stability, and they are easy to installyear-round – even in northern climates.Greater thicknesses add to the rigidity of thesystems, increase resistance to wind upliftand add longevity. The membranes areavailable in a standard, energy-saving whitecolor, as well as sandstone and grey.

8

JM Single Ply Systems Lead the Way in Energy Conservation.

ENRGY 3 PolyisocyanurateRoof Insulation

JM-Approved Fasteners

JM TPO or JM PVC Mechanically Attached MembraneInvinsa Roof Board

Mechanically Attached

JM-Approved Fasteners

Deck

Mechanically fastened, JM TPO or JM PVC singleply roofing system. For use over JM-approved

decks or other approved insulation.

JM EPDM Single Ply Roofing SystemsThe JM thermoset single ply membrane iscalled JM EPDM (ethylene propylene dienemonomer). JM EPDM has superior weather-ability through a wide range of temperaturesand conditions and it demonstrates superiorozone resistance.

These membranes are available with orwithout a polyester scrim reinforcement. JM EPDM non-reinforced membranes are available in 45, 60 and 90 mil thicknesses.Membrane widths of up to 40 ft. (12.2 m)and lengths up to 100 ft. (30.5 m) are avail-able. JM reinforced EPDM membranes areavailable in 45, 60 and 75 mil thicknesses.JM EPDM can be installed in ballasted,mechanically fastened or adhered applica-tions. For those applications where addedstrength, durability and dimensional stability

are desired, the polyester reinforced prod-ucts should be specified.

With the appropriate JM single ply system,you will be able to meet industry approvalssuch as: UL, FM, ENERGY STAR, CRRC and Dade County. Finally, as with all Johns Manville roofing systems, completelines of accessory products are availableincluding seam tapes, adhesives, caulk, termination bars and flashings.

Mechanically attached, reinforced JM EPDM single ply roofing system. For use over

Johns Manville insulation, approved decks, or other approved insulation on inclines

up to 6 in. per foot (500 mm/m).

9

Whether your needs are high or low thermal, or if your project calls for a BUR,modified bitumen or single ply system, JMoffers the most advanced insulation technol-ogy available. Before selecting a product, besure to review the performance, design andinstallation requirements of the total roofingsystem to ensure compatibility of all components.

Thermal Products

Johns Manville offers two high-thermal roofinsulation products composed of closed-cellpolyisocyanurate foam, bonded to universal

fiber glass reinforced facers.

ENRGY 3 is a rigid roof insulation panel designed fordirect application overmetal, nailable and non-nailable deck types.

ENRGY 3 may be used withBUR or modified bitumen sys-

tems. It meets the physical prop-erty requirements of ASTM C 1289, Type II,Class 1, Grade 2. ENRGY 3 and ISO 3 alsoare available in a higher compressivestrength of 25 psi (172 kPa), which meetsASTM C 1289, Type II, Class 1, Grade 3.

ENRGY 3 is a state-of-the-art product

manufactured with pentane. These polyiso

foams have zero ozone depletion potential.

Roof Boards

4 Fesco® Board is composed of expandedperlite, blended with selected binders andfibers. It is used as a general purpose coverboard over closed-cell foam insulationboards, and is a low thermal insulationboard. It can be used in BUR, modified bitu-men and some single ply roofing systems.Because its special TOPLOK® coating pre-vents excessive absorption of asphalt duringinstallation, and its expanded perlite contains air cells that provide insulating efficiency, Fesco Board is the best board forlow thermal applications.

10

There's a JM Roof Insulation Product to Fit Every Roofing System and

Meet Every Thermal Requirement.

ENRGY 3 LTTR ValuesStandard Total RecycledThicknesses (nom.)* LTTR R-Value** Content(in.) (mm) (hr•ft2•°F)/Btu m2•°C/W (%)1.0 25 6.0 1.05 44.81.5 40 9.0 1.59 36.71.7 43 10.3 1.81 34.82.0 50 12.1 2.14 32.92.3 58 14.0 2.47 30.12.5 65 15.3 2.69 29.72.8 71 17.2 3.03 28.43.0 80 18.5 3.26 28.03.1 79 19.0 3.33 27.63.3 84 20.4 3.60 27.04.0 100 25.0 4.40 25.1

*Other thicknesses available.** A 15-year, time-weighted average derived from a recently

developed, scientifically supported methodology called Long TermThermal Resistance.

Fesco Board ValuesThickness (nom.) Total Recycled R-Value (Resistance)in. mm Content (%) (hr•ft2•°F)/BTU m2•°C/W

0.75 19 32 2.08 0.371.0 25 32 2.78 0.491.5 38 27 4.17 0.732.0 51 27 5.56 0.98

4 This Paper Recycling Symbol indicates that JM has joined other manufacturers of commercial andconsumer goods throughout the United States in the utilization of recyclable materials.

4 Fesco® Board HD (High Density) is a 1 in. (25 mm) thick, homogeneous rigid insulationboard, composed of expanded perlite, blended with selected binders and cellulosicfibers. The top surface is sealed with a special TOPLOK coating to prevent excessiveabsorption of asphalt during the installationprocess. Fesco Board HD is a special, made-to-order product for use directly overa wide flute or metal deck application. It canspan spaces up to 21/2 in. (64 mm) and canbe used under BUR, modified bitumen andsome single ply roofing systems. It workswith cold adhesives, mechanical fasteners orhot asphalt.

4 InvinsaTM Roof Board is a resilient, light-weight roof board designed as an integralcomponent of the roof system. It provides aprotective layer for the insulation, whileworking with the membrane above toensure maximum performance and longevi-ty. This patent-pending, high-density polyiso-cyanurate technology is bonded in-line tomineral-surfaced, fiber glass reinforced fac-ers. In PVC, TPO, EPDM and JMCleanBondroof systems, Invinsa enhances fire, waterand hail resistance, and it will not supportmold growth.

4 1/2” Retro-Fit™ Board is used in both retro-fit and overlay applications. It is composedof expanded perlite, blended with selectedbinders and fibers. The primary function isto provide an improved substrate for theroofing membrane. It may be applied withcold adhesive, mechanical fasteners or hotasphalt. It is not for use directly over steeldecks.

4 DuraBoard® is a high-density rigid insulation board, composed primarily ofexpanded perlite with reinforcing cellulosicfibers and selected binders. The top surfaceof the board is sealed with a special polymerized asphalt emulsion coating thatenhances adhesion of the covering membrane. DuraBoard is used in new andre-cover applications, or over closed-cellfoam insulations. It is designed specificallyfor direct application of heat-weldable SBSor APP modified bitumen membrane systems. Since a base sheet is not requiredin heat-weldable applications usingDuraBoard, fastener quantity and labor timeare both reduced.

Fesco Board HD ValuesThickness (nom.) Total Recycled R-Value (Resistance)in. mm Content (%) (hr•ft2•°F)/BTU m2•°C/W

1.0 25 30 2.78 0.49*

0.5 13 30 1.32 0.23

1/2” Retro-Fit Board ValuesThickness (nom.) Total Recycled R-Value (Resistance)in. mm Content (%) (hr•ft2•°F)/BTU m2•°C/W

11

0.5 13 28 1.2 0.210.75 19 25 1.8 0.321.0 25 25 2.3 0.41

DuraBoard ValuesThickness (nom.) Total Recycled R-Value (Resistance)

in. mm Content (%) (hr•ft2•°F)/BTU m2•°C/W

Invinsa ValuesThickness (nom.) Weight* Compressive Strength in. mm lbs. kgs. psi/psf kPa/Pa

0.25 6.4 123 123 150 / 21,600 1034 / 1,034,200

*per 4’ x 8’ (1.22 m x 2.44 m) board

Composite Products

4 Fesco® Foam is a rigid insulation boardfor use over metal, nailable and non-

nailable decks in BUR, modifiedbitumen and certain single plyroofing systems. It is composedof a polyisocyanurate foam core,bonded to a 1/2–in. (13 mm)

Fesco laminator board on oneside and a universal fiber glass rein-

forced facer on the other. It meets thephysical property requirements of ASTM C1289, Type III.

12

Nailboard LTTR Thermal Values

(Includes 7⁄16” [11 mm] OSB)

Thickness R-Value(nom.) (Resistance) Weight(in.) (mm) (hr•ft2•°F)/BTU m2•ºC/W lbs./sq.ft. kg/m2

1.5 38 6.8 1.20 1.75 8.542.0 51 9.9 1.74 1.80 8.782.5 64 13.0 2.29 1.85 9.033.0 76 16.2 2.85 1.90 9.273.5 89 19.4 3.42 1.95 9.514.0 102 22.6 3.98 2.00 9.764.5 114 25.9 4.56 2.05 10.01

(Includes 5⁄8” [16 mm] OSB)

Thickness R-Value(nom.) (Resistance) Weight(in.) (mm) (hr•ft2•°F)/BTU m2•ºC/W lbs./sq.ft. kg/m2

1.5 38 6.1 1.07 2.25 10.972.0 51 9.2 1.62 2.30 11.222.5 64 12.3 2.17 2.35 11.473.0 76 15.4 2.71 2.40 11.723.5 89 18.6 3.28 2.45 11.974.0 102 21.9 3.86 2.50 12.224.5 114 25.1 4.42 2.55 12.45

* The Long Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S 770.

NailboardTM is a rigid roof insulation boardcomposed of a closed-cell polyisocyanuratefoam core bonded to 7/16–in. (11 mm) ori-ented strand board (OSB) on one side and a universal fiber glass reinforced facer on theother. It is used as an insulation/nailbaseunderlayment for a variety of roofing systems. It meets the physical requirementsof ASTM C 1289, Type V. Nailboard also isavailable with 5/8–in. (16 mm) OSB.

* Long TermThermal Resistance (LTTR)

* Long TermThermal Resistance (LTTR)

Fesco Foam Thermal ValuesThickness (nom.) Total Recycled R-Value (Resistance)**in. mm Content (%) (hr•ft2•°F)/BTU m2•°C/W

1.5 38 38 7.4 1.302.0 51 35 10.4 1.832.5 64 34 13.5 2.383.0 76 32 16.7 2.944.0 102 30 23.1 4.07*Other thicknesses available.

** A 15-year, time-weighted average derived from a recently developed, scientifically supported methodology called Long Term Thermal Resistance.

DuraFoam ValuesThickness (nom). Total Recycled R-Value (Resistance)**in. mm Content (%) (hr•ft2•°F)/BTU m2•°C/W

1.5 38 38.6 7.2 1.272.0 51 36.4 10.2 1.802.5 64 34.9 13.3 2.343.0 76 33.3 16.5 2.903.5 89 32.3 19.7 3.474.0 102 31.2 22.9 4.03

4 DuraFoamTM is a high-thermal rigid roofinsulation board composed of polyisocyanu-rate foam core bonded in the foamingprocess to DuraBoard, an expanded perlitemineral aggregate board. The top surface ofDuraFoam is sealed with a special polymer-ized asphalt emulsion coating to allow forthe direct application of SBS or APP mem-branes using heat-weld application tech-niques.

Helping to Specify the Complete Roofing System Specifying and designing today’s roofing sys-tems can become very complicated due tothe vast amount of products, codes, qualifica-tions, trades, and considerations required ofboth the design professional and installationentity on projects throughout the industry.

Design Engineering is a group of profession-als brought together to emphasize the roofas a system. This diverse group offers a vari-ety of expertise in all facets of roofing andbuilding design including: building science,specifications, design assist, codes assis-tance, tapered layouts, wind design, sheetlayouts, details, and assembly logistics.

When specifying a JM system, this resourcenow provides the building professional witha key tool for ensuring a roofing system that complements the building envelope andworks as a system to complete a qualitybuilding package.

Design Engineering Group 800-341-8032

Tapered Insulation Group

With JM’s dedicated Tapered InsulationGroup, complex designs with limitations inslope, edge conditions, maximum thickness,or minimum thermal resistance value areeasily and effectively achieved. Throughyears of experience with tight designrequirements, this group can maximize thetapered layout to address all thermal anddrainage concerns.

Tapered Products

Tapered products are rigid roof insulationboards designed for direct application tosteel and other roof decks to promote posi-tive drainage in both new construction andreroofing where ponding water or positiveslope are a concern.

Tapered products offered by JM includeTapered ENRGY 3® and Tapered ENRGY 3®

Plus, sloped polyisocyanurate foam coreroof insulation boards. Tapered ENERGY 3Plus is bonded in the foaming process to a1/2–in. (13 mm) asphalt-coated, high-densitywood fiber board on one side and fiber rein-forced facer on the other.

JM also offers Tapered Fesco Foam, a closedcell polyisocyanurate foam core bonded inthe foaming process to a specially formulat-ed UL Class A 1/2–in. (13 mm) Fesco lamina-tor board on one side and a universal fiberglass reinforced facer on the other.

Other tapered system insulation productsinclude FesCant™ Plus Cant Strips whichassist with deck-to-wall transitions andTapered Fesco® Edge Strips, which aredesigned for transitioning from membraneto nailer or from a tapered insulation panelto the roof level.

13

CONTRACTOR

SERVICES

APPLICATION

SERVICES

CO

NS

TR

UC

TIO

N

PA

CK

AG

E C

OM

PLE

TE

D Construction Documents

• Detail Drawings• Schedules• Specifications• Bidding Requirements• Revised Cost Projections

• Owner defines Design/Build

FacilityManagement

ProjectConception

Project

Activity

Cycle

ProjectDelivery

• Drawings• Cost Projections• Design Criteria• Outline Specifications

DesignConstruction

• Permits• Warranties• Shop Drawings• Record Documents• Maintenance Manuals

Procurement

• Request for Proposal• Bids/Submittals• Letters of Approval• Purchase Orders

14

JM Specialty Roofing Products are Designed for Total Integration of Systems.

JM Specialty Roofing Products provide designers and specifiers with a single sourceof supply, assuring the compatibility of components and, ultimately, the integrity of

the finished roofing system. All of JM’s Specialty Roofing Products can be includedin a JM Peak Advantage Guarantee.

Expand-O-Flash® Apatented, watertightroof expansion jointcover for a wide variety of applications.

Expand-O-Flash®

EJ/WC Attachmentflanges are concealedwith rubber cover ofsufficient width tocover bellows andflanges. Also availablein rigid PVC-concealedflanges with a PVCcover that can beheat-welded to thePVC membrane.

Expand-O-Flash® INSA patented, factory-prefabricated, insulat-ed expansion jointcover. It is formedusing any Expand-O-Flash cover and JMMicrolite® “L” fiberglass insulation.

Factory-FabricatedIntersectionsDesigned for maximum flexibilityand produced usingspecial fabricationtechniques to ensurewatertight, cleanseam lines.

Expand-O-Gard®

Vertical wall flexibleclosures for a widevariety of applications.

Presto Lock™ FasciaSystem FM 1-90 fasciafor BUR, modifiedbitumen and single plymembrane systems.

Presto Lock™ CopingSystem FM 1-90 copingfor BUR, modifiedbitumen and single plymembrane systems.

Presto-TiteTM FasciaSystems For maximumwind uplift protection.Available for BUR,MBR and single plyapplications.

Flex-I-Drain® Flexiblebellows drains toaccommodate move-ment between drainand plumbing.

RetroDrain®* Spunaluminum, copper orco-polymer retrofitdrains with cast aluminum or co-polymer domes.

“If You Can Draw It, We Can

Make It.”

Johns Manville has established a reputation based on our ability tocustom design and fabricate specialsystems to solve building movementand closure problems. No matter how unusual your roofing challenge,we can turn your rough sketches into a custom manufactured Expand-O-Flash, Expand-O-Gard, Presto LockFascia or Coping System or PrestoTiteFascia. Call your JM SpecialtyRoofing Products Technical ServiceRepresentative at 800-445-1500.

This brief section cannot includeinformation, data or pictures on everyspecialty roofing product JM offers.For complete details, please call yourTechnical Service Representative orrefer to the JM Specialty RoofingProducts brochure (RS-6002).

*RetroDrain is a registered trademark of Olympic Manufacturing Group, Inc.

Guarantees and Guarantee Services with the Strongest Backing in the Industry.

Throughout our 150-year history, the Johns Manville brand name has come torepresent strength, stability, quality and consistency. Based in Denver, JM has annualsales in excess of $2.5 billion and holds leadership positions in all of the key marketsit serves. JM employs approximately 8,500people and operates 43 manufacturing facilities in North America, Europe andChina.

Assuring Better Roof Performance through

Education and Contractor Incentives.

To help you design and specify the mosteffective roofing system and deliver theabsolute best value to owners, JM has created a definitive and objective trainingschool for architects, engineers, consultants,specification writers and roofing contrac-tors. It’s called the JM Roofing Institute. The Better Understanding of RoofingSystems Institute (BURSI®) is a part of the JM Roofing Institute™.

BURSI offers a comprehensive, 11/2-day program of intensive instruction covering allaspects of the roofing system as they applyto design, specification, installation, performance and maintenance. The instituteis staffed by experts in low-slope roofingtechnology.

To ensure qualityworkmanship and top-notch installation,JM offers its Peak AdvantageTM

Contractor Program.Contractors selected toparticipate are proven to be best of class,having lived up to the highest performancestandards. These contractors have access toJM’s strongest guarantees. To be assured ofthe best possible results on the roofing sys-tem you specify, make sure it’s installed by a JM Peak Advantage contractor.

15

For additional technical or guarantee information:

Contractor ServicesP.O. Box 625001Littleton, CO 80162-5001800.922.5922FAX: 303.978.2808

RS-7301 7-07 (Replaces 7-06)

Roofing Systems717 17th St.Denver, CO 80202800-922-5922www.jm.com

PRODUCT WARRANTIES

Johns Manville designs roofing products that worktogether to provide a one source comprehensive roofingsystem solution. Total roofing system guarantees areavailable under the JM Peak Advantage® Guarantee program. To learn more about our standard guaranteeterms and conditions, visit our Web site at www.jm.com or talk to your local JM sales representative.

JM Peak Advantage Guarantees are available only onqualified JM roofing systems containing JM roofing products. JM standard product terms and conditions will apply to include a one-year limited product warranty.Limited product warranty information is available atwww.jm.com/About Us/US Terms and Conditions.

Printed on recycled paper