at-1500 test report · test(s) marked with ‘#’ is/are not covered under the scope of...
TRANSCRIPT
TEST REPORT Test Report # 18H‐009740 Date of Report Issue: March 26, 2019
Date of Sample Received: December 14, 2018 Pages: Page 1 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
AT-1500
CLIENT INFORMATION:
Company: Polyconcept GBS
Recipient: Patrick Lam
Recipient Email: [email protected]
SAMPLE INFORMATION:
Description: Refer to page 2 to 10
Assortment: ‐ Purchase Order Number: ‐
Article No.: Refer to Page 2 to 10 Toy Co./Agency: ‐
Vendor Name: 10583 Country of Origin: China
Country of Distribution: United States, Canada Labeled Age Grade: ‐
Quantity Submitted: Refer to Page 2 to 10 Requested Age Grade: ‐
Testing Period: 12/18/2018 – 01/15/2019 02/19/2019 – 03/08/2019 03/18/2019 – 03/25/2019
Tested Age Grade: ‐
OVERALL RESULT:
PASS
Refer to page 11 for test result summary and appropriate notes.
QIMA Testing (HK) Limited
Loska Yeung Lok Ka
Assistant Manager, Chemical Laboratory
Test Report #: 18H‐009740 Page 2 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Mega Dble‐Wall Plastic Tumbler 1622‐84 WH 1786608 6 pcs
Hot & Cold Flip Skinny Tumbler 1623‐49 BK 1589175 6 pcs
1623‐49 BL 1778928 6 pcs
Hot & Cold Flip Vortex Tumbler
1623‐57 BK 1766210 6 pcs
1623‐57 BL 1789058 6 pcs
1623‐57 CL 1759185 6 pcs
1623‐57 GR 1770533 6 pcs
1623‐57 OR 1786610 6 pcs
1623‐57 RD 1766638 6 pcs
Mega Vortex Tumbler
1623‐65 BK 1786653 6 pcs
1623‐65 BL 1790226 6 pcs
1623‐65 CL 1794335 6 pcs
1623‐65 GR 1779256 4 pcs
1623‐65 OR 1783951 6 pcs
1623‐65 RD 1747748 5 pcs
Fruiton BPA Free Inf Tritan Btle
1623‐82 BL 1719449 6 pcs
1623‐82 GR 1732077 6 pcs
1623‐82 GY 1762712 6 pcs
1623‐82 RD 1743340 6 pcs
1623‐82 TQ 1766802 6 pcs
Game Day Cup w/lid
1623‐91 BK 1766921 6 pcs
1623‐91 BL 1766212 6 pcs
1623‐91 RD 1770788 6 pcs
Ice Cool Tumbler
1623‐94 BL 1781510 6 pcs
1623‐94 TQ 1776704 6 pcs
1623‐94 WH 1779673 4 pcs
Vintage Mason Jar 1624‐15 SGL 1770534 6 pcs
Test Report #: 18H‐009740 Page 3 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Game Day Dble‐Wall Mason Jar
1624‐31 BK 1589071 6 pcs
1624‐31 BL 1790664 6 pcs
1624‐31 RD 1773298 6 pcs
Fiesta Ball 20oz with Straw
SM‐6620 CL M000002297 6 pcs
SM‐6620 TLGR P000077072 6 pcs
SM‐6620 TRBL M000006852 6 pcs
Twister 16oz Tumbler with Straw
SM‐6657 CL M000007813 6 pcs
SM‐6657 BK M000004559 6 pcs
SM‐6657 GR P000080239 6 pcs
SM‐6657 TRBL M000007377 6 pcs
Templar 22oz Tumbler
SM‐6659 BL M000004559 6 pcs
SM‐6659 RE M000004352 6 pcs
SM‐6659 WH M000007080 6 pcs
Redondo 14oz Travel Tumbler
SM‐6675 BL M000002097 6 pcs
SM‐6675 RE M000003388 6 pcs
SM‐6675 SI M000003222 6 pcs
Wrapper 16oz Tumbler SM‐6683 LM P000082645 6 pcs
SM‐6683 PBL M000004559 6 pcs
Hydra 22oz Tritan Sports Bottle
SM‐6854 CL P000069715 6 pcs
SM‐6854 BL P000069715 6 pcs
SM‐6854 SM P000069715 6 pcs
Fountain Soda 24oz Tumbler
SM‐6868 CL M000004559 6 pcs
SM‐6868 BK P000077603 6 pcs
SM‐6868 BL M000002646 6 pcs
Toto 16oz Travel Tumbler SM‐6925 YL M000005734 6 pcs
Geo 20oz Travel Insulated Tumbler SM‐6440BK M000003173 6 pcs
SM‐6440 SL M000000982 6 pcs
Vintage Dble‐Wall Mason Jar 1624‐33SGL 1770628 6 pcs
Test Report #: 18H‐009740 Page 4 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Geo BPA Free Tritan Sprts Btle
1624‐47BK 1793103 6 pcs
1624‐47BL 1792356 6 pcs
1624‐47CL 1781177 6 pcs
1624‐47LM 1792241 6 pcs
1624‐47OR 1794876 6 pcs
1626‐47PP 1786679 6 pcs
1624‐47RD 1795015 6 pcs
Hot & Cold Flip Geom Tumbler
1624‐49BK 1785656 6 pcs
1624‐49BL 1690748 6 pcs
1624‐49CL 1787865 6 pcs
1624‐49LM 1764996 6 pcs
1624‐49PP 1776382 6 pcs
1624‐49RD 1650545 6 pcs
Geometric Vacuum Tumbler 1624‐51RGD 1766339 6 pcs
1624‐51SL 1772061 6 pcs
Geo Stainless Sport Bottle 1624‐60SGL 1715882 6 pcs
Copper Vacuum Insulated Btle
1624‐74SL 1756793 6 pcs
1624‐74TI 1785672 6 pcs
1624‐74GR 1762714 6 pcs
1624‐74LM 1762641 6 pcs
1624‐74RD 1790269 6 pcs
1624‐74NEBL 1759194 6 pcs
1624‐74NOR 1785319 6 pcs
1624‐74NPK 1755412 6 pcs
1624‐74NGR 1720051 6 pcs
1624‐74RGD 1770345 6 pcs
Test Report #: 18H‐009740 Page 5 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Torino 15oz Tumbler
SM‐6840 RD M000004559 6 pcs
SM‐6840 BK M000007813 6 pcs
SM‐6840 GR M000004559 6 pcs
SM‐6840 YL M000005681 6 pcs
SM‐6840 SL M000004559 6 pcs
Tailgate 16oz Party Cup
SM‐6588 BL P000082897 6 pcs
SM‐6588 NY M000008114 6 pcs
SM‐6588 BK M000005346 6 pcs
SM‐6588 RD M00000334 6 pcs
Swivel Lid Stainless Tumbler 1624‐82 BL 1728060 6 pcs
Growl Vac Keg Growler 1624‐88 SL 1773315 6 pcs
Slash Iridescent Vacuum Tumbler 1624‐94 IR 1752479 6 pcs
Mega Copper Vac Ins Btle
1625‐13 BK 1782749 6 pcs
1625‐13 NY 1770379 6 pcs
1625‐13 SL 1790270 6 pcs
1625‐13 RGD 1797532 6 pcs
1625‐13 TI 1787102 6 pcs
Hot & Cold Bloom Geo Tumbler 1625‐17 CL 1776623 6 pcs
1625‐17 RYL 1716016 6 pcs
Native Wooden Cop Vac Ins Btl 1625‐11 WD 1712610 6 pcs
Hot & Cold Celebration Tumbler 1625‐12 MT 1793943 6 pcs
Marble Copper Vac Ins Bottle 1625‐14 WH 1713829 6 pcs
Victor Copper Vac Tblr w/open
1625‐24 BK 1720757 6 pcs
1625‐24 LM 1720753 6 pcs
1625‐24 NY 1720756 6 pcs
1625‐24 SL 1722537 6 pcs
1625‐24 WH 1720755 6 pcs
Victor Copper Vac Tblr w/open ‐ Opener ‐ ‐ 11 pcs
Test Report #: 18H‐009740 Page 6 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Hot & Cold Flip Cop Vac Tblr
1625‐29 BK 1701138 6 pcs
1625‐29 BL 1707036 6 pcs
1625‐29 LM 1712440 6 pcs
1625‐29 RD 1701140 6 pcs
Valholla Cop Vac Mug w/ Cork
1625‐48 BK 1792257 6 pcs
1625‐48 GY 1739308 6 pcs
1625‐48 NY 1758190 6 pcs
1625‐48 SL 1765029 6 pcs
Sauron 22oz Tumbler with Straw
SM‐6670 CL M000006345 6 pcs
SM‐6670 BK M000005346 6 pcs
SM‐6670 BL M000002614 6 pcs
SM‐6670 RE M000001321 6 pcs
HideAway 16oz Tritan Sports Bottle SM‐6856 GR P000058833 6 pcs
SM‐6856 RD P000058638 6 pcs
Corzo Copper Vacuum Insulated Cup
1625‐53 SL 1795100 6 pcs
1625‐53 WH 1793423 6 pcs
1625‐53 NY 1796610 6 pcs
1625‐53 BK 1796560 6 pcs
1625‐53 MTGR 1790628 6 pcs
1625‐53 GY 1790667 6 pcs
1625‐53 PBL 1790629 6 pcs
1625‐53 RD 1790746 6 pcs
Pinto Copper Vacuum Insulated Bottle
1625‐65 BK 1774804 6 pcs
1625‐65 GY 1762485 6 pcs
1625‐65 SL 1731156 6 pcs
1625‐65 WH 1771169 6 pcs
1625‐65 NY 1789374 6 pcs
Test Report #: 18H‐009740 Page 7 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Valholla Cop Vac Tmbr w/ Cork
1625‐69 BK 1791522 6 pcs
1625‐69 GY 1777630 6 pcs
1625‐69 NY 1777631 6 pcs
1625‐69 SL 1783666 6 pcs
1625‐69 WH 1781550 6 pcs
Rover Copper Vacuum Insulated Camp Mug
1625‐76 BK 1795149 6 pcs
1625‐76 GY 1796855 6 pcs
1625‐76 NY 1795151 6 pcs
1625‐76 WH 1792878 6 pcs
1625‐76 SL 1785924 6 pcs
Iridescent Tumbler
1625‐91BK 1796540 6 pcs
1625‐911BL 1796539 6 pcs
1625‐91WH 1796538 6 pcs
Vasa Copper Vacuum Insulated Bottle
1625‐96 BK 1775441 6 pcs
1625‐96 NY 1778584 6 pcs
1625‐96 SL 1785356 6 pcs
1625‐96 WH 1790267 6 pcs
Cutter & Buck® Bainbridge Copper Vac Bottle 9870‐11 CR 1793121 6 pcs
Sedici Mega Acrylic Tumbler 1622‐98 CL 1787118 6 pcs
Growl Stainless Pint Glass 1624‐39 SL 1794682 6 pcs
Geometric Tumbler
1624‐69 BK 1771016 6 pcs
1624‐69 BL 1795066 6 pcs
1624‐69 CL 1706447 6 pcs
Hot & Cold Clarity Drop Tumbler 1624‐87 RD 1703619 6 pcs
1624‐87 RYL 1701670 6 pcs
Geometric Stainless Bottle
1625‐18 BL 1788575 6 pcs
1625‐18 GA 1749531 6 pcs
1625‐18 RD 1715511 6 pcs
1625‐18 SL 1692089 6 pcs
Test Report #: 18H‐009740 Page 8 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Bellagio Copper Vac Insulated Flask
1625‐19 BK 1694939 6 pcs
1625‐19 BL 1694938 6 pcs
1625‐19 LM 1712265 6 pcs
1625‐19 SL 1692096 6 pcs
Aurora Copper Vacuum Insulated Bottle
1625‐26 IRBL 1712476 6 pcs
1625‐26 IRGD 1701149 6 pcs
1625‐26 IRGR 1775356 6 pcs
1625‐26 IRWH 1764768 6 pcs
Duke Copper Vacuum Insulated Bottle
1625‐27 BK 1726270 6 pcs
1625‐27 GY 1775709 6 pcs
1625‐27 RYL 1712472 6 pcs
1625‐27 SL 1727838 6 pcs
1625‐27 WH 1781209 6 pcs
Copper Vacuum Flask w/ Ceramic Lining 1625‐32 BL 1720777 6 pcs
1625‐32 SL 1720778 6 pcs
Tugo Copper Vac Tumbler & Can Insulator 1625‐37 SL 1713385 6 pcs
Glacier Copper Vacuum Tumbler
1625‐99 BK 1798456 6 pcs
1625‐99 BL 1775084 6 pcs
1625‐99 MDBL 1796154 6 pcs
1625‐99 SL 1775087 6 pcs
1625‐99 TI 1775083 6 pcs
1625‐99 WH 1802354 6 pcs
Norse Copper Vacuum Insulated Bottle
1626‐01 BK 1775076 6 pcs
1626‐01 GM 1775072 6 pcs
1626‐01 GY 1775074 6 pcs
1626‐01 NY 1775078 6 pcs
1626‐01 SL 1775079 6 pcs
1626‐01 WH 1775077 6 pcs
Test Report #: 18H‐009740 Page 9 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Speckled Vasa Copper Vacuum Insulated Bottle
1626‐11 BK 1775049 6 pcs
1626‐11 HG 1775044 6 pcs
1626‐11 NY 1775045 6 pcs
1626‐11 WH 1775046 6 pcs
Bumble Copper Vacuum Insulated Bottle
1626‐12 BK 1781137 6 pcs
1626‐12 GM 1781139 6 pcs
1626‐12 SL 1796562 6 pcs
Bumble Copper Vacuum Insulated Cup
1626‐13 BK 1781135 6 pcs
1626‐13 GM 1781131 6 pcs
1626‐13 NY 1771133 6 pcs
1626‐13 SL 1781128 6 pcs
1626‐13 WH 1781130 6 pcs
Thor Copper Vacuum Insulated Tumbler
1626‐50 BK 1798106 6 pcs
1626‐50 GY 1798107 6 pcs
1626‐50 MTGR 1788074 6 pcs
1626‐50 NY 1798109 6 pcs
1626‐50 OR 1788076 6 pcs
1626‐50 PBL 1788078 6 pcs
1626‐50 RD 1792112 6 pcs
1626‐50 SL 1798113 6 pcs
1626‐50 WH 1798114 6 pcs
Valhalla Copper Vacuum Insulated Bottle
1626‐58 BK 1798361 6 pcs
1626‐58 GY 1798357 6 pcs
1626‐58 NY 1798358 6 pcs
1626‐58 SL 1798362 6 pcs
1626‐58 WH 1798359 6 pcs
Test Report #: 18H‐009740 Page 10 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
ARTICLE/PO NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. PO No. Qty.
Coco Ice Cool Tumbler
1626‐61 BK 1796454 6 pcs
1626‐61 BL 1796455 6 pcs
1626‐61 CL 1796456 6 pcs
1626‐61 GR 1796453 6 pcs
1626‐61 RD 1796452 6 pcs
Test Report #: 18H‐009740 Page 11 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
TEST RESULTS SUMMARY:
At the request of the client, the following tests were conducted:
CONCLUSION TEST(S) CONDUCTED
PASS CPSIA Section 101 & 16 CFR 1303, Total Lead in Paints and Surface Coatings
PASS California Proposition 65, Total Lead in Paints and Surface Coatings
PASS California Proposition 65, Total Lead in Substrate Materials
PASS California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP)
PASS FDA GRAS Specifications, Total Chromium in Stainless Steel Food Containers#
PASS Client’s Requirement, Bisphenol A#
PASS FDA 21 CFR 175.300, Resinous and Polymeric Coatings#
PASS FDA 21 CFR 177.1210, Closures with Sealing Gaskets#
PASS FDA 21 CFR 177.1520, Polypropylene Copolymers
PASS FDA 21 CFR 177.1520, Polyethylene Homopolymers
PASS FDA 21 CFR 177.1520, Polypropylene Homopolymers
PASS FDA 21 CFR 177.1630, Polyethylene Phthalate Polymers
PASS FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers
PASS FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers
PASS Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim
PASS Canadian Surface Coating Materials Regulations SOR/2016‐193, Total Lead in Surface Coating Materials
PASS Canadian Consumer Products Containing Lead Regulations (SOR/2018‐83), Total Lead Content
Test Report #: 18H‐009740 Page 12 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
CPSIA Section 101 & 16 CFR 1303, Total Lead in Paints and Surface Coatings Test Method: CPSC‐CH‐E‐1003‐09.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 77+78+79 80+81+82 84+85 89 139+140 +141
Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 142+143 144+145 178+179 +180
181+182 +183
184+185 +186
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 187+188 +189
190 191 222+223 +224
225+226 +227
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 13 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
CPSIA Section 101 & 16 CFR 1303, Total Lead in Paints and Surface Coatings Test Method: CPSC‐CH‐E‐1003‐09.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 228+229 +230
231+232 233+234 235 236+237 +238
Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 239+240 +241
242+243 +244
245+246 +247
248+249 +250
251+252 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND 25 ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 253+254 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 90
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 14 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
California Proposition 65, Total Lead in Paints and Surface Coatings Test Method: CPSC‐CH‐E‐1003‐09.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 77+78+79 80+81+82 84+85 89 139+140 +141
Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 142+143 144+145 178+179 +180
181+182 +183
184+185 +186
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 187+188 +189
190 191 222+223 +224
225+226 +227
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than
ND = Not detected (Reporting Limit = 20 ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 15 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
California Proposition 65, Total Lead in Paints and Surface Coatings Test Method: CPSC‐CH‐E‐1003‐09.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 228+229 +230
231+232 233+234 235 236+237 +238
Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 239+240 +241
242+243 +244
245+246 +247
248+249 +250
251+252 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND 25 ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 253+254 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 90
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than
ND = Not detected (Reporting Limit = 20 ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 16 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 7+8+9 10+11+12 13+14+15 16+17+18 19+20+21 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 22+23+24 25+26 27+28 29+30+31 32+33+34 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 35+36+37 38+39+40 41+42+43 44+45+46 47+48+49 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than
ND = Not detected (Reporting Limit = 20 ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 17 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 50+51 52+53+54 55+56 57+58+59 60+61 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 62+63 74 76 94+95+96 97+98+99 Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 100+101 +102
103+104 +105
106+107 108+109 110+111 +112
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than
ND = Not detected (Reporting Limit = 20 ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 18 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 113+114 +115
116+117 118+119 120 121 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 122+123 +124
136 137 146+147 +148
149+150 +151
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 152+153 154+155 156+157 158+159 160+161 Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than
ND = Not detected (Reporting Limit = 20 ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 19 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 162+163 192+193 194+195 196+197 +198
200 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 201 202 208 210 211 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 212 213 259+260261
262+263 264+265 +266
Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than
ND = Not detected (Reporting Limit = 20 ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 20 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 267+268 +269
270+271 +272
273+274 +275
276 277 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 278 279+280 290 291 304 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 305 307 334+335+336
‐‐‐ ‐‐‐ Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ‐‐‐ ‐‐‐ 100
Conclusion PASS PASS PASS ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than
ND = Not detected (Reporting Limit = 20 ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 21 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 7+8+9 10+11+12 13+14+15 16+17+18
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 22 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 19+20+21 22+23+24 25+26 27+28
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 23 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 29+30+31 32+33+34 35+36+37 38+39+40
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 24 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 41+42+43 44+45+46 47+48+49 50+51
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 25 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 52+53+54 55+56 57+58+59 60+61
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 26 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 62+63 77+78+79 80+81+82 84+85
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 27 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 89 94+95+96 97+98+99 100+101 +102
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 28 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 103+104+105
106+107 108+109 110+111 +112
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 29 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 113+114+115
116+117 118+119 120
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 30 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 121 122+123+124
136 137
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND 290 ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 31 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 139+140+141
142+143 144+145 146+147 +148
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 290 ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 270 200 230 180 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 32 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 149+150+151
152+153 154+155 156+157
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 170 ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 33 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 158+159 160+161 162+163 178+179 +180
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 34 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 181+182+183
184+185+186
187+188+189
190
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND LT 170 ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND LT 170 ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND LT 170 ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND LT 170 ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND LT 170 ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND LT 170 ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 35 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 191 192+193 194+195 196+197 +198
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 36 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 200 201 202 208
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 37 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 210 211 212 222+223 +224
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND 210 ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 38 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 225+226+227
228+229+230
231+232 233+234
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 39 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 235 236+237+238
239+240+241
242+243 +244
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 40 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 245+246+247
248+249+250
251+252 253+254
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 41 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 259+260+261
262+263 264+265+266
267+268 +269
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 42 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 270+271+272
273+274+275
276 277
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 43 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 278 279+280 290 291
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ND ND ND 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ND ND ND 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ND ND ND 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ND ND ND 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ND ND ND 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ND ND ND 1000
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 44 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) Test Method: CPSC‐CH‐C1001‐09.3 Analytical Method: Gas Chromatography with Mass Spectrometry
Specimen No. 334+335+336
‐‐‐ ‐‐‐ ‐‐‐
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Dibutyl phthalate (DBP)
84‐74‐2 ND ‐‐‐ ‐‐‐ ‐‐‐ 1000
Benzyl butyl phthalate (BBP)
85‐68‐7 ND ‐‐‐ ‐‐‐ ‐‐‐ 1000
Di‐(2‐ethylhexyl) phthalate (DEHP)
117‐81‐7 ND ‐‐‐ ‐‐‐ ‐‐‐ 1000
Diisononyl phthalate (DINP)
28553‐12‐0 68515‐48‐0
ND ‐‐‐ ‐‐‐ ‐‐‐ 1000
Diisodecyl phthalate (DIDP)
26761‐40‐0 68515‐49‐1
ND ‐‐‐ ‐‐‐ ‐‐‐ 1000
Di‐n‐hexyl phthalate (DnHP)
84‐75‐3 ND ‐‐‐ ‐‐‐ ‐‐‐ 1000
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 120 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: The specification is quoted from client’s requirement.
Test Report #: 18H‐009740 Page 45 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA GRAS Specifications, Total Chromium in Stainless Steel Food Containers
Test Method: In‐House Method#
Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 73 306 ‐‐‐ ‐‐‐ ‐‐‐
Test Item Result (% m/m)
Result (% m/m)
Result (% m/m)
Result (% m/m)
Result (% m/m)
Limit (% m/m)
Total Chromium (Cr) 16.5 18.2 ‐‐‐ ‐‐‐ ‐‐‐ GT 16
Conclusion PASS PASS ‐‐‐ ‐‐‐ ‐‐‐
Note: % m/m = Percent by mass GT = Greater than Remark: The limit is quoted from ANSI/NSF 51‐1997 Section 7.1.2.
Test Report #: 18H‐009740 Page 46 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: In‐House Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 1 2 3 4
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 5 6 7 8
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 9 10 11 12
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 13 14 15 16
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
Test Report #: 18H‐009740 Page 47 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: In‐House Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 17 18 19 20
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 21 22 23 24
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 25 26 27 28
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 29 30 31 32
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
Test Report #: 18H‐009740 Page 48 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: In‐House Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 33 34 35 36
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 37 38 39 40
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 57 58 59 60
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 61 62 63 92
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
Test Report #: 18H‐009740 Page 49 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: In‐House Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 93 94 95 96
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 97 98 99 100
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 101 102 103 104
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 105 106 107 121
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
Test Report #: 18H‐009740 Page 50 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: In‐House Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 122 123 124 136
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 146 147 148 149
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 150 151 162 163
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 192 193 194 195
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
Test Report #: 18H‐009740 Page 51 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: In‐House Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 200 201 202 208
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 210 211 212 241
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 255 256 257 258
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
Test Report #: 18H‐009740 Page 52 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: In‐House Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 259 263 264 265
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 266 267 268 281
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 290 291 334 335
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND
Conclusion PASS PASS PASS PASS
Specimen No. 336 ‐‐‐ ‐‐‐ ‐‐‐
Test Item CAS No. Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Bisphenol A (BPA) 80‐05‐7 PASS ‐‐‐ ‐‐‐ ‐‐‐ ND
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
Test Report #: 18H‐009740 Page 53 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 175.300, Resinous and Polymeric Coatings Test Method: FDA 21 CFR 175.300#
Specimen No. 241 ‐‐‐
Test Item Test Condition Result
(mg/in2) Result (mg/in2)
RL (mg/in2)
Limit (mg/in2) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
0.23 ‐‐‐ 0.1 18
Conclusion PASS ‐‐‐
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 175.300 (c) (3).
Test Report #: 18H‐009740 Page 54 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 66 68
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 69 125
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 126 127
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 55 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 163 165
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 167 168
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND 18 10 50
Conclusion PASS PASS
Specimen No. 169 172
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND 11 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 56 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 199 200
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 202 203
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 206 209
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 57 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 281 282
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 284 285
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 286 287
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 58 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 288 289
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 290 291
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 292 293
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 59 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 294 298
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 299 300
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 301 ‐‐‐
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ‐‐‐ 10 50
Conclusion PASS ‐‐‐
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 60 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 121 162
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ND 10 50
Conclusion PASS PASS
Specimen No. 201 ‐‐‐
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive Fill boiling Until Cool to 100OF
ND ‐‐‐ 10 50
Conclusion PASS ‐‐‐
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 3.
Test Report #: 18H‐009740 Page 61 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 64 65
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 67 70
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 71 72
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 62 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 128 129
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 138 164
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 166 170
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 63 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 171 204
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 205 207
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 283 295
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 64 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 296 297
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 302 303
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.
Test Report #: 18H‐009740 Page 65 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 58 59
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 60 61
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 62 63
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 3.
Test Report #: 18H‐009740 Page 66 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 122 123
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 124 208
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Specimen No. 210 211
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ND 10 50
Conclusion PASS PASS
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 3.
Test Report #: 18H‐009740 Page 67 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS:
FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#
Specimen No. 212 ‐‐‐
Test Item Test Condition Result
(ppm) Result (ppm)
RL (ppm)
Limit (ppm) Temp. Duration
Distilled water extractive 120°F 24 hours ND ‐‐‐ 10 50
Conclusion PASS ‐‐‐
Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram foodstuff) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 3.
Test Report #: 18H‐009740 Page 68 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 4 5
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.913 0.894 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.5 1.0 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
4.5 3.1 1.0 30
Conclusion PASS PASS
Specimen No. 12 13
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.901 0.905 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 2.1 1.5 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
5.1 4.0 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 69 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 14 15
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.902 0.902 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.1 1.4 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
3.5 4.0 1.0 30
Conclusion PASS PASS
Specimen No. 16 17
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.902 0.903 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.0 1.1 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
3.3 2.7 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 70 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 18 19
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.903 0.903 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.0 1.2 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
3.8 3.8 1.0 30
Conclusion PASS PASS
Specimen No. 20 21
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.900 0.908 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.7 ND 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
1.0 2.6 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 71 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 22 23
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.900 0.905 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.6 1.8 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
4.3 2.0 1.0 30
Conclusion PASS PASS
Specimen No. 24 25
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.896 0.905 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.7 0.9 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
6.2 2.8 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 72 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 26 27
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.905 0.906 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.9 0.9 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
1.8 2.5 1.0 30
Conclusion PASS PASS
Specimen No. 28 29
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.901 0.900 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.8 1.7 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
2.5 4.0 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 73 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 30 31
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.905 0.901 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.7 2.1 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
2.3 7.1 1.0 30
Conclusion PASS PASS
Specimen No. 93 94
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.896 0.899 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.1 0.6 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
1.7 2.2 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 74 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 95 146
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.900 0.907 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.8 0.4 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
5.1 1.8 1.0 30
Conclusion PASS PASS
Specimen No. 147 193
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.902 0.902 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.0 0.5 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
3.8 1.1 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 75 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 194 255
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.905 0.937 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.6 1.2 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
1.4 8.0 1.0 30
Conclusion PASS PASS
Specimen No. 256 257
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.921 0.925 NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 0.8 0.4 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
8.2 7.5 1.0 30
Conclusion PASS PASS
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 76 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Copolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 263 ‐‐‐
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.900 ‐‐‐ NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.2 ‐‐‐ 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
4.7 ‐‐‐ 1.0 30
Conclusion PASS ‐‐‐
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Test Report #: 18H‐009740 Page 77 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polyethylene Homopolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 259 ‐‐‐
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.917 ‐‐‐ NA 0.85‐1.00
n‐Hexane extractive (%) 50°C 2 hours 1.1 ‐‐‐ 0.4 5.5
Xylene extractive (%) Reflux 2 hours or until total dissolved
4.7 ‐‐‐ 1.0 11.3
Conclusion PASS ‐‐‐
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 2.1.
Test Report #: 18H‐009740 Page 78 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520
Specimen No. 334 335
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.896 0.903 NA 0.880 – 0.913
Melting point (oC) NA NA 169.2 168.9 NA 150 – 180
n‐Hexane extractive (%) Reflux 2 hours 3.5 1.1 0.1 6.4
Xylene extractive (%) 120°C 2 hours or until total dissolved
1.5 2.0 0.5 9.8
Conclusion PASS PASS
Specimen No. 336 ‐‐‐
Test Item Temp. Duration Result Result RL Limit
Density (g/cc) NA NA 0.898 ‐‐‐ NA 0.880 – 0.913
Melting point (oC) NA NA 169.3 ‐‐‐ NA 150 – 180
n‐Hexane extractive (%) Reflux 2 hours 1.6 ‐‐‐ 0.1 6.4
Xylene extractive (%) 120°C 2 hours or until total dissolved
2.2 ‐‐‐ 0.5 9.8
Conclusion PASS ‐‐‐
Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.
Test Report #: 18H‐009740 Page 79 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1630, Polyethylene Phthalate Polymers Test Method: FDA 21 CFR 177.1630
Specimen No. 32
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Specimen No. 33
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1630 (f).
Test Report #: 18H‐009740 Page 80 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1630, Polyethylene Phthalate Polymers Test Method: FDA 21 CFR 177.1630
Specimen No. 34
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Specimen No. 96
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1630 (f).
Test Report #: 18H‐009740 Page 81 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1630, Polyethylene Phthalate Polymers Test Method: FDA 21 CFR 177.1630
Specimen No. 97
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Specimen No. 98
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1630 (f).
Test Report #: 18H‐009740 Page 82 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1630, Polyethylene Phthalate Polymers Test Method: FDA 21 CFR 177.1630
Specimen No. 99
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours 0.1 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Specimen No. 100
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1630 (f).
Test Report #: 18H‐009740 Page 83 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1630, Polyethylene Phthalate Polymers Test Method: FDA 21 CFR 177.1630
Specimen No. 101
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Specimen No. 151
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours ND 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1630 (f).
Test Report #: 18H‐009740 Page 84 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 177.1630, Polyethylene Phthalate Polymers Test Method: FDA 21 CFR 177.1630
Specimen No. 195
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 2500F 2 hours 0.1 0.1 0.5
n‐Heptane extractive (mg/in2) 1500F 2 hours ND 0.1 0.5
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1630 (f).
Test Report #: 18H‐009740 Page 85 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 1
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 2
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 86 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 3
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 6
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 87 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 7
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 8
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 88 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 9
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 10
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 89 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 11
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 92
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 90 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 102
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 103
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 91 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 104
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 136
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 92 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 148
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 149
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 93 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 192
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 258
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 94 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 264
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 265
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 95 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 35
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 36
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 96 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 37
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 38
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 97 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 39
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 40
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 98 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 105
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 106
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 99 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 107
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 150
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 100 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 266
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Specimen No. 267
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 101 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry
Acrylonitrile Monomers:
Specimen No. 268
Test Simulant Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003
Conclusion PASS
Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).
Test Report #: 18H‐009740 Page 102 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 135A 135B 135C 135D 135E 135F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
200 200 200 200 200 200
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 173A 173B 173C 173D 173E 173F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 103 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 174A 174B 174C 174D 174E 174F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 175A 175B 175C 175D 175E 175F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 104 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 176A 176B 176C 176D 176E 176F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 177A 177B 177C 177D 177E 177F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 105 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 214A 214B 214C 214D 214E 214F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 215A 215B 215C 215D 215E 215F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 106 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 216A 216B 216C 216D 216E 216F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 217A 217B 217C 217D 217E 217F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 107 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 218A 218B 218C 218D 218E 218F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 219A 219B 219C 219D 219E 219F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 108 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 220A 220B 220C 220D 220E 220F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 221A 221B 221C 221D 221E 221F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 109 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 308A 308B 308C 308D 308E 308F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 309A 309B 309C 309D 309E 309F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 110 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 310A 310B 310C 310D 310E 310F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 311A 311B 311C 311D 311E 311F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 111 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 312A 312B 312C 312D 312E 312F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 313A 313B 313C 313D 313E 313F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 112 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 314A 314B 314C 314D 314E 314F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 315A 315B 315C 315D 315E 315F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 113 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 316A 316B 316C 316D 316E 316F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 317A 317B 317C 317D 317E 317F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 114 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 318A 318B 318C 318D 318E 318F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 319A 319B 319C 319D 319E 319F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 115 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 320A 320B 320C 320D 320E 320F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 321A 321B 321C 321D 321E 321F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 116 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 322A 322B 322C 322D 322E 322F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 323A 323B 323C 323D 323E 323F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 117 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 324A 324B 324C 324D 324E 324F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 325A 325B 325C 325D 325E 325F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 118 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 326A 326B 326C 326D 326E 326F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 327A 327B 327C 327D 327E 327F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 119 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 328A 328B 328C 328D 328E 328F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 329A 329B 329C 329D 329E 329F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
220 220 220 220 220 220
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 120 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 330A 330B 330C 330D 330E 330F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 331A 331B 331C 331D 331E 331F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 121 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Client’s Requirement, Leachable Lead & Cadmium from Glassware and Ceramics – Lip & Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 332A 332B 332C 332D 332E 332F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 333A 333B 333C 333D 333E 333F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
250 250 250 250 250 250
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L) Remark: The limit is quoted from Society of Glass & Ceramic Decorated Products.
Test Report #: 18H‐009740 Page 122 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Canadian Surface Coating Materials Regulations SOR/2016‐193, Total Lead in Surface Coating Materials Test Method: CPSC‐CH‐E‐1003‐09.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 77+78+79 80+81+82 84+85 89 139+140 +141
Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 142+143 144+145 178+179 +180
181+182 +183
184+185 +186
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 187+188 +189
190 191 222+223 +224
225+226 +227
Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 123 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Canadian Surface Coating Materials Regulations SOR/2016‐193, Total Lead in Surface Coating Materials Test Method: CPSC‐CH‐E‐1003‐09.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 228+229 +230
231+232 233+234 235 236+237 +238
Total
Test Item Result (ppm)
Result(ppm)
Result(ppm)
Result(ppm)
Result (ppm)
Limit(ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 239+240 +241
242+243 +244
245+246 +247
248+249 +250
251+252 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND 25 ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 253+254 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 90
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 124 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Canadian Consumer Products Containing Lead Regulations (SOR/2018‐83), Total Lead Content Test Method: ASTM F963‐17 Clause 8.3.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 7+8+9 10+11+12 13+14+15 16+17+18 19+20+21
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 22+23+24 25+26 27+28 29+30+31 32+33+34
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 35+36+37 38+39+40 41+42+43 44+45+46 47+48+49
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 57+58+59 60+61 62+63 74 76
Test Item Result (mg/kg)
Result(mg/kg)
Result(mg/kg)
Result(mg/kg)
Result (mg/kg)
Limit(mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: mg/kg (Milligrams per kilogram) = ppm (Parts per million) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 125 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Canadian Consumer Products Containing Lead Regulations (SOR/2018‐83), Total Lead Content Test Method: ASTM F963‐17 Clause 8.3.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 77+78+79 80+81+82 84+85 89 94+95+96
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 97+98+99 100+101 +102
103+104 +105
106+107 108+109
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 121 122+123 +124
136 139+140 +141
142+143
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 144+145 146+147+148
149+150+151
139+140+141
142+143
Test Item Result (mg/kg)
Result(mg/kg)
Result(mg/kg)
Result(mg/kg)
Result (mg/kg)
Limit(mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: mg/kg (Milligrams per kilogram) = ppm (Parts per million) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 126 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Canadian Consumer Products Containing Lead Regulations (SOR/2018‐83), Total Lead Content Test Method: ASTM F963‐17 Clause 8.3.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 144+145 146+147+148
149+150+151
152+153 154+155
Test Item Result (mg/kg)
Result(mg/kg)
Result(mg/kg)
Result(mg/kg)
Result (mg/kg)
Limit(mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 162+163 178+179 +180
181+182 +183
184+185 +186
187+188 +189
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 190 191 192+193 194+195 200
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 201 202 208 210 211
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: mg/kg (Milligrams per kilogram) = ppm (Parts per million) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 127 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Canadian Consumer Products Containing Lead Regulations (SOR/2018‐83), Total Lead Content Test Method: ASTM F963‐17 Clause 8.3.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 212 213 222+223+224
225+226+227
228+229 +230
Test Item Result (mg/kg)
Result(mg/kg)
Result(mg/kg)
Result(mg/kg)
Result (mg/kg)
Limit(mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 231+232 233+234 235 236+237 +238
239+240 +241
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 242+243 +244
245+246 +247
248+249 +250
251+252 253+254
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) 25 ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: mg/kg (Milligrams per kilogram) = ppm (Parts per million) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 128 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
DETAILED RESULTS: Canadian Consumer Products Containing Lead Regulations (SOR/2018‐83), Total Lead Content Test Method: ASTM F963‐17 Clause 8.3.1 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 259+260 +261
262+263 264+265+266
267+268+269
278
Test Item Result (mg/kg)
Result(mg/kg)
Result(mg/kg)
Result(mg/kg)
Result (mg/kg)
Limit(mg/kg)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 290 291 334+335 +336
‐‐‐ ‐‐‐
Test Item Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Result (mg/kg)
Limit (mg/kg)
Total Lead (Pb) ND ND ND ‐‐‐ ‐‐‐ 90
Conclusion PASS PASS PASS ‐‐‐ ‐‐‐
Note: mg/kg (Milligrams per kilogram) = ppm (Parts per million) = 0.0001 % m/m (Percent by mass) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Test Report #: 18H‐009740 Page 129 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
1 Transparent black plastic (AS) Lid (1624‐31BK style); straw (1623‐49BK style); lid (all 1626‐13/ all 1625‐99/ all 1625‐76 styles)
2 Transparent plastic (AS)
Inner wall (all 1624‐31/ all 1623‐94/ 1623‐65CL/ 1623‐57CL/ 1624‐49CL styles); lid (all 1623‐82/ 1623‐65CL/ 1623‐57CL/ 1624‐49CL styles); infuser (all 1623‐82 styles); ring of straw (all 1623‐49 styles); spout (all 1624‐47 styles); lid (SM‐6440BK style); lid/ body (SM‐6670CL/ SM‐6620CL/ SM‐6868CL styles); lid/ inner wall (SM‐6657CL/ 1625‐17CL styles); body (all SM‐6659 styles); lid/ inner wall/ swivel (1625‐12MT style); lid (all 1625‐24 styles); lid (all 1626‐50 styles); inner wall (all 1626‐61/ all 1624‐87/ 1622‐98CL/ 1624‐69CL styles); lid (1626‐61CL/ 1622‐98CL/ all 1625‐53/ all 1625‐91/ 1624‐69CL styles); spout (all 1625‐18 styles)
3 Transparent red plastic (AS) Lid (1624‐31RD/ 1625‐29RD/ 1626‐61RD/ 1624‐87RD styles)
4 Translucent plastic (PP‐co)
Ring of straw (all 1624‐31/ all 1623‐94/ 1624‐15SGL/ all 1623‐65/ 1624‐33SGL/ all SM‐6657/ all SM‐6670/ all SM‐6620/ all SM‐6659/ all SM‐6868/ all 1625‐17/ 1625‐12MT/ all 1624‐87/ all 1624‐69 styles); straw (1623‐94WH/ 1623‐65CL/ 1623‐57CL/ all 1624‐47/ 1624‐49CL/ SM‐6670CL/ SM‐6620CL/ SM‐6657CL/ SM‐6659WH/ SM‐6868CL/ 1625‐17CL/ 1625‐12MT/ all 1625‐29/ 1624‐69CL styles)
Test Report #: 18H‐009740 Page 130 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
5 Black plastic (PP‐co)
Lid (1623‐91BK/ all 1624‐51 styles); inner lid (all 1624‐74 styles); lid/ slider (all SM‐6840/ all SM‐6683 styles); body (all SM‐6683 styles); lid/ inner wall (all SM‐6675/ SM‐6925YL styles); lid (1624‐94IR style); inner lid (all 1625‐13/ 1625‐11WD/ 1625‐14WH styles); slider (all 1625‐17 styles); lid (1626‐58BK/ 1626‐58SL/ all 1625‐19 styles); inner lid (all 1626‐12/ all 1626‐11/ all 1625‐27/ all 1625‐26/ all 1625‐96/ all 1625‐65 styles); lid (all 1626‐01/ all 1625‐18 styles); lid/ slider (1625‐37SL style); neck of body (all 1625‐32 styles)
6 Transparent blue plastic (AS)
Lid (1624‐31BL/ 1623‐65BL/ 1623‐57BL/ 1623‐49BL styles); inner wall (1623‐65BL/ 1623‐57BL/ 1623‐49BL styles); lid/ inner wall (SM‐6657TRBL style); lid/ body (SM‐6670BL/ SM‐6620TRBL/ SM‐6868BL styles); lid/ inner wall (1625‐17RYL style); lid (1625‐29BL style); lid (1626‐61BL/ 1624‐87RYL style)
7 Transparent dark black plastic (AS)
Lid/ inner wall (1623‐65BK/ 1623‐57BK/ 1623‐49BK/ 1624‐49BK styles); lid (SM‐6440SL styles); lid/ body (SM‐6670BK/ SM‐6868BK style); lid/ inner wall (SM‐6657BK/ 1624‐69BK styles); lid (1625‐29BK style); lid (all 1625‐48/ all 1625‐69 styles); lid/ outer wall (1626‐61BK style)
8 Transparent green plastic (AS) Lid/ inner wall (1623‐65GR/ 1623‐57GR styles); lid/ inner wall (SM‐6657GR style); lid (1625‐29LM style)
9 Transparent orange plastic (AS) Lid/ inner wall (1623‐65OR/ 1623‐57OR styles)
10 Transparent dark red plastic (AS) Lid/ inner wall (1623‐65RD/ 1623‐57RD/ 1624‐49RD styles); lid/ body (SM‐6670RE style); lid (SM‐6856RD style)
11 Transparent bright blue plastic (AS) Straw (1623‐49BL style)
Test Report #: 18H‐009740 Page 131 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
12 Translucent dark black plastic (PP‐co) Straw (1624‐31BK style)
13 Translucent blue plastic (PP‐co)
Straw (1624‐31BL/ 1623‐94BL/ 1623‐65BL/ 1623‐57BL/ SM‐6657TRBL/ SM‐6670BL/ SM‐6620TRBL/ SM‐6659BL/ SM‐6868BL/ 1625‐17RYL/ 1624‐87RYL/ 1624‐69BL styles)
14 Translucent red plastic (PP‐co) Straw (1624‐31RD/ 1623‐65RD/ 1623‐57RD/ 1624‐49RD/ SM‐6670RE/ SM‐6659RE/ 1624‐87RD styles)
15 Translucent light turquoise plastic (PP‐co) Straw (1624‐15SGL/ 1624‐33SGL styles)
16 Translucent turquoise plastic (PP‐co) Straw (1623‐94TQ style)
17 Translucent black plastic (PP‐co) Straw (1623‐65BK/ 1623‐57BK/ 1624‐49BK/ SM‐6670BK/ SM‐6657BK/ SM‐6868BK/ 1624‐69BK styles)
18 Translucent green plastic (PP‐co) Straw (1623‐65GR/ 1623‐57GR/ 1624‐49LM/ SM‐6657GR styles)
19 Translucent orange plastic (PP‐co) Straw (1623‐65OR/ 1623‐57OR styles)
20 Grey plastic (PP‐co) Slider (all 1623‐91 styles)
21 Blue plastic (PP‐co) Lid (1623‐91BL style)
22 Red plastic (PP‐co) Lid (1623‐91RD style)
23 Dull blue plastic (PP‐co) Lid (1623‐94BL style)
24 Turquoise plastic (PP‐co) Lid (1623‐94TQ style); holder of infuser (1623‐82TQ style)
25 Dull white plastic (PP‐co) Lid (1623‐94WH/ 1622‐84WH styles); body (1622‐84WH style); inner wall (all SM‐6588 styles); lid (SM‐6659WH style)
26 Matt blue plastic (PP‐co) Holder of infuser (1623‐82BL style)
27 Green plastic (PP‐co) Holder of infuser (1623‐82GR style)
28 Bright grey plastic (PP‐co) Holder of infuser (1623‐82GY style)
29 Shiny red plastic (PP‐co) Holder of infuser (1623‐82RD style); lid (SM‐6659RE style)
30 Dull grey plastic (PP‐co) Swivel (1623‐49BK style)
31 Off blue plastic (PP‐co) Swivel (1623‐49BL style)
Test Report #: 18H‐009740 Page 132 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
32 Transparent turquoise plastic (Tritan) Body (1624‐15SGL style)
33 White plastic (Tritan) Inner wall (all 1623‐91 styles)
34 Clear plastic (Tritan) Body (all 1623‐82/ 1624‐47CL/ all SM‐6856 styles); lid/ body (SM‐6854CL style); straw (all 1626‐50 styles)
35 Clear black plastic (ABS)
Slider (1623‐65BK/ 1624‐49BK styles); spout (1623‐57BK style); slider (SM‐6657BK/ all 1625‐69/ 1624‐69BK styles); spout (1625‐29BK style); lid (all 1625‐48 styles); swivel (all 1625‐99 styles)
36 Clear blue plastic (ABS)
Slider (1623‐65BL style); spout (1623‐57BL style); slider (SM‐6657TRBL style); spout (1625‐29BL style); slider (1624‐87RYL style)
37 Dull clear plastic (ABS)
Slider (1623‐65CL style); spout (1623‐57CL/ 1624‐49CL styles); slider (SM‐6657CL style); slider (all 1626‐50/ 1624‐69CL styles)
38 Clear green plastic (ABS) Slider (1623‐65GR style); spout (1623‐57GR style); slider (SM‐6657GR style); spout (1625‐29LM style)
39 Clear orange plastic (ABS) Slider (1623‐65OR style); spout (1623‐57OR style)
40 Clear red plastic (ABS) Slider (1623‐65RD style); spout (1623‐57RD/ 1624‐49RD/ 1625‐29RD styles); slider (1624‐87RD style)
41 Transparent black plastic Lid/ bottom (1624‐31BK style); straw (1623‐49BK style); lid (all 1626‐13/ all 1625‐99/ all 1625‐76 styles)
Test Report #: 18H‐009740 Page 133 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
42 Transparent plastic
Inner wall (all 1624‐31/ all 1623‐94/ 1623‐65CL/ 1623‐57CL/ 1624‐49CL styles); handle (all 1624‐31 styles); lid (all 1623‐82/ 1623‐65CL/ 1623‐57CL/ 1624‐49CL styles); outer wall (all 1624‐31/ all 1623‐94/ all 1623‐65/ all 1623‐57/ all 1623‐49 styles); infuser (all 1623‐82 style); ring of straw (all 1623‐49 styles); spout (all 1624‐47 styles); outer wall (all 1624‐49 styles); lid (SM‐6440BK style); outer wall (all SM‐6657 styles); lid/ body (SM‐6670CL/ SM‐6620CL/ SM‐6868CL styles); lid/ inner wall (SM‐6657CL style); body (all SM‐6659 styles); outer wall (all 1625‐17 styles); lid/ inner wall (1625‐17CL style); lid/ swivel/ inner wall/ outer wall (1625‐12MT/ all 1624‐87 style); lid (all 1625‐24/ all 1625‐53/ all 1626‐50 styles); inner wall (all 1626‐61/ 1622‐98CL styles); lid/ outer wall (1626‐61CL/ 1622‐98CL/ all 1625‐91 styles); spout (all 1625‐18 styles); outer wall (all 1624‐69 styles)
43 Transparent blue plastic
Lid (1624‐31BL/ 1623‐65BL/ 1623‐57BL/ 1623‐49BL styles); inner wall (1623‐65BL/ 1623‐57BL/ 1623‐49BL styles); bottom (1624‐31BL style); lid/ inner wall (SM‐6657TRBL style); lid/ body (SM‐6670BL/ SM‐6620TRBL/ SM‐6868BL styles); lid/ inner wall (1625‐17RYL style); lid (1625‐29BL style); lid/ outer wall (1626‐61BL style); lid/ bottom (1624‐87RYL style)
44 Transparent red plastic Lid/ bottom (1624‐31RD style); lid/ outer wall (1626‐61RD style); lid/ bottom (1624‐87RD style)
Test Report #: 18H‐009740 Page 134 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
45 Black plastic
Lid (1623‐91BK/ all 1624‐51 styles); flip (1623‐57BK/ all 1624‐51/ 1624‐49BK styles); inner lid (all 1624‐74 styles); lid/ slider (all SM‐6840/ all SM‐6683 styles); outer wall (SM‐6588BK style); body (all SM‐6683 styles); lid/ inner wall/ bottom (all SM‐6675 styles); lid/ inner wall (SM‐6925YL style); lid/ flip of lid (1624‐94IR style); inner lid (all 1625‐13/ 1625‐11WD/ 1625‐14WH styles); slider (all 1625‐17 styles); flip of lid (1625‐29BK style); handle (1625‐48BK/ 1625‐48SL styles); lid/ handle/ bottom (1626‐58BK/ 1626‐58SL styles); inner lid (all 1626‐12/ all 1626‐11/ all 1625‐27/ all 1625‐26/ all 1625‐96/ all 1625‐65 styles); lid (all 1626‐01/ all 1625‐18 styles); lid/ slider/ bottom (1625‐37SL style); neck of body (all 1625‐32 styles); lid/ handle (all 1625‐19 styles); bottom (1625‐69BK style)
46 Translucent plastic
Ring of straw (all 1624‐31/ all 1623‐94/ 1624‐15SGL/ all 1623‐65/ 1624‐33SGL/ all SM‐6657/ all SM‐6670/ all SM‐6620/ all SM‐6659/ all SM‐6868/ all 1625‐17/ 1625‐12MT/ all 1624‐87/ all 1624‐69 styles); straw (1623‐94WH/ 1623‐65CL/ 1623‐57CL/ 1624‐47/ all 1624‐47/ 1624‐49CL/ SM‐6670CL/ SM‐6620CL/ SM‐6657CL/ SM‐6659WH/ SM‐6868CL/ 1625‐17CL/ 1625‐12MT/ all 1625‐29/ 1624‐69CL styles); flip (1623‐57CL/ 1624‐49CL styles)
47 Shiny blue plastic Top/ bottom of body (1623‐94BL style)
48 Bright turquoise plastic Top/ bottom of body (1623‐94TQ style)
49 Bright white plastic Top/ bottom of body (1623‐94WH style)
50 Bright black plastic Outer wall (1623‐91BK style)
51 Bright blue plastic Outer wall (1623‐91BL style)
Test Report #: 18H‐009740 Page 135 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
52 Bright red plastic Outer wall (1623‐91RD style)
53 Navy plastic Flip (1623‐57BL style)
54 Dull green plastic Flip (1623‐57GR/ 1625‐29LM styles)
55 Orange plastic Flip (1623‐57OR style)
56 Dull red plastic Flip (1623‐57RD/ 1624‐49RD/ 1625‐29RD styles)
57 Translucent soft plastic (Silicon)
Gasket (all 1624‐31/ 1624‐15SGL/ all 1623‐91/ all 1623‐94/ all 1623‐82/ 1622‐84WH/ all 1623‐65/ all 1623‐57/ all 1623‐49/ all 1624‐74/ 1624‐60SGL/ all 1624‐51/ 1624‐33SGL/ all 1624‐47/ all 1624‐49/ SM‐6440BK/ all SM‐6657/ all SM‐6840/ SM‐6440SL/ all SM‐6670/ all SM‐6856/all SM‐6683/ all SM‐6675/ all SM‐6659/ all SM‐6868/ all SM‐6854/ 1624‐82BL/ all 1625‐13/ all 1625‐17/ 1625‐11WD/ 1625‐12MT/ 1625‐14WH/ all 1625‐24/ all 1625‐29/ all 1625‐48/ all 1626‐13/ all 1626‐50/ all 1626‐58/ all 1626‐61/ all 1626‐12/ all 1626‐11/ all 1626‐01/ all 1625‐99/ all 1625‐27/ all 1625‐26/ all 1625‐19/ all 1625‐18/ all 1624‐87/ 1622‐98CL/ 9870‐11CR/ all 1625‐96/ all 1625‐69/ all 1625‐65/ all 1625‐53/ all 1625‐91/ all 1624‐69 styles)
58 Black soft plastic (TPR) Gasket of flip (1623‐57BK/ 1624‐49BK styles)
59 Navy soft plastic (TPR) Gasket of flip (1623‐57BL style)
60 Green soft plastic (TPR) Gasket of flip (1623‐57GR style)
61 Orange soft plastic (TPR) Gasket of flip (1623‐57OR style)
62 Red soft plastic (TPR) Gasket of flip (1623‐57RD/ 1624‐49RD styles)
63 Dull translucent soft plastic (TPR) Gasket of flip (1623‐57CL/ 1624‐49CL styles)
Test Report #: 18H‐009740 Page 136 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
64 Translucent soft plastic (Silicon) Gasket (all 1624‐31 styles)
65 Translucent soft plastic (Silicon) Gasket (1624‐15SGL style)
66 Translucent soft plastic (Silicon) Gasket (all 1623‐91 styles)
67 Translucent soft plastic (Silicon) Gasket (all 1623‐94 styles)
68 Translucent soft plastic (Silicon) Gasket (all 1623‐82 styles)
69 Translucent soft plastic (Silicon) Gasket (1622‐84WH style)
70 Translucent soft plastic (Silicon) Gasket (all 1623‐65 styles)
71 Translucent soft plastic (Silicon) Gasket of lid (all 1623‐57/ all 1624‐49 styles)
72 Translucent soft plastic (Silicon) Gasket (all 1623‐49 styles)
73 Silvery metal (#304 Stainless Steel)
Lid (1624‐15SGL/ 1624‐33SGL styles); inner wall (all 1624‐74/ 1624‐60SGL/ all 1624‐51/ 1624‐88SL/ 1624‐94IR/ all 1625‐13/ 1625‐11WD/ 1625‐14WH/ all 1625‐24/ all 1625‐29/ all 1625‐48 styles); inner wall (all 1626‐13/ all 1626‐50/ all 1626‐58/ all 1626‐12/ all 1626‐11/ all 1626‐01/ all 1625‐99/ 1625‐37SL/ all 1625‐32/ all 1625‐27/ all 1625‐26/ all 1625‐19/ 1624‐39SL/ 9870‐11CR/ all 1625‐96/ all 1625‐76/ all 1625‐69/ all 1625‐65/ all 1625‐53 styles)
Test Report #: 18H‐009740 Page 137 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
74 Silvery metal
Lid (1624‐15SGL/ 1624‐33SGL styles); outer wall/ bottom (all 1624‐74 styles); outer lid (all 1624‐74/ 1624‐60SGL styles); inner wall (all 1624‐74/ 1624‐60SGL/ all 1624‐51/ 1624‐94IR/ 1624‐39SL styles); inner wall/ outer wall/ handle (1624‐88SL style); outer lid/ inner wall/ outer wall/ bottom (all 1625‐13/ 1625‐11WD/ 1625‐14WH styles); outer wall (all 1625‐24/ all 1625‐29 styles); opener (all 1625‐24 styles); inner wall/ outer wall (all 1625‐48 styles); inner wall/ outer wall (all 1626‐13/ all 1626‐50/ all 1626‐58/ all 1626‐12/ all 1626‐11/ all 1626‐01/ all 1625‐99/ 1625‐37SL/ all 1625‐32/ all 1625‐27/ all 1625‐26/ all 1625‐19/ 9870‐11CR/ all 1625‐96/ all 1625‐76/ all 1625‐69/ all 1625‐65/ all 1625‐53 styles); outer lid/ bottom (all 1626‐12/ all 1626‐11/ all 1625‐27/ all 1625‐26/ 9870‐11CR/ all 1625‐96/ all 1625‐65 styles)
76 Dull silvery metal
Outer wall (all 1624‐51/ SM‐6440BK styles); outer wall (all SM‐6840/ SM‐6440SL/ all SM‐6675/ 1624‐82BL styles); inner wall (all 1625‐18 styles)
77 Coppery coating On outer wall/ bottom (1624‐74RGD/ 1624‐51RGD/ 1625‐13RGD styles); outer lid (1624‐74RGD/ 1625‐13RGD styles)
78 Bright green coating On outer wall/ outer lid/ bottom (1624‐74NGR style)
79 Pink coating On outer wall/ outer lid/ bottom (1624‐74NPK style)
80 Orange coating On outer wall/ outer lid/ bottom (1624‐74NOR style)
81 Blue coating On outer wall/ outer lid/ bottom (1624‐74NEBL style)
Test Report #: 18H‐009740 Page 138 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
82 Dark red coating On outer wall/ outer lid/ bottom (1624‐74RD style)
84 Green coating On outer wall/ outer lid/ bottom (1624‐74LM style)
85 Dark green coating On outer wall/ outer lid/ bottom (1624‐74GR style)
89 Black coating
On outer wall/ outer lid/ bottom (1625‐13BK styles); outer wall (SM‐6440BK/ 1625‐48BK/ 1626‐13BK/ 1626‐58BK/ 1626‐12BK/ 1626‐01BK/ 1625‐27BK/ 1625‐19BK/ 1625‐96BK/ 1625‐69BK styles)
92 Clear turquoise plastic (AS) Lid/ neck of body (1624‐60SGL style); inner wall (1624‐33SGL style)
93 Shiny grey plastic (PP‐co) Lid (all 1624‐47 styles)
94 Translucent purple plastic (PP‐co) Straw (1624‐49PP style)
95 Translucent light blue plastic (PP‐co) Straw (1624‐49BL style)
96 Dull transparent black plastic (Tritan) Body (1624‐47BK style); lid/ body (SM‐6854SM style)
97 Dull transparent blue plastic (Tritan) Body (1624‐47BL style)
98 Dull transparent green plastic (Tritan) Body (1624‐47LM style)
99 Dull transparent orange plastic (Tritan) Body (1624‐47OR style)
100 Transparent purple plastic (Tritan) Body (1624‐47PP style)
101 Dull transparent red plastic (Tritan) Body (1624‐47RD style)
102 Clear purple plastic (AS) Lid/ inner wall ( 1624‐49PP style)
103 Clear bright green plastic (AS) Lid/ inner wall (1624‐49LM style); lid/ body (SM‐6620TLGR style)
104 Clear bright blue plastic (AS) Lid/ inner wall (1624‐49BL/ 1624‐69BL styles)
Test Report #: 18H‐009740 Page 139 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
105 Dull clear purple plastic (ABS) Spout (1624‐49PP style)
106 Clear shiny green plastic (ABS) Spout (1624‐49LM style)
107 Clear shiny blue plastic (ABS) Spout (1624‐49BL style)
108 Clear turquoise plastic Lid/ neck of body/ outer wall/ bottom (1624‐60SGL style); inner wall/ outer wall/ handle (1624‐33SGL style)
109 Shiny grey plastic Lid/ handle/ wrapper of body (all 1624‐47 styles)
110 Purple plastic Flip of lid (1624‐49PP style)
111 Bright green plastic Flip of lid (1624‐49LM style)
112 Sharp blue plastic Flip of lid (1624‐49BL style)
113 Grey soft plastic Patch on lid/ handle (1624‐47BK style)
114 Blue soft plastic Patch on lid/ handle (1624‐47BL style)
115 White soft plastic Patch on lid/ handle (1624‐47CL style)
116 Bright green soft plastic Patch on lid/ handle (1624‐47LM style)
117 Bright orange soft plastic Patch on lid/ handle (1624‐47OR style)
118 Purple soft plastic Patch on lid/ handle (1624‐47PP style)
119 Dull red soft plastic Patch on lid/ handle (1624‐47RD style)
120 Translucent soft plastic Pad of bottom (1624‐60SGL style)
121 Black soft plastic (TPR) Gasket of flip (all 1624‐51 style)
122 Shiny green soft plastic (TPR) Gasket of flip (1624‐49LM style)
Test Report #: 18H‐009740 Page 140 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
123 Dull purple soft plastic (TPR) Gasket of flip (1624‐49PP style)
124 Dull blue soft plastic (TPR) Gasket of flip (1624‐49BL style)
125 Translucent soft plastic (Silicone) Gasket (all 1624‐74/ 1625‐11WD/ 1625‐14WH styles)
126 Translucent soft plastic (Silicone) Gasket (1624‐60SGL style)
127 Translucent soft plastic (Silicone) Gasket (all 1624‐51 style)
128 Translucent soft plastic (Silicone) Gasket (1624‐33SGL style)
129 Translucent soft plastic (Silicone) Gasket (all 1624‐47 styles)
135 Black printed dull silvery metal Lip & Rim of tumbler (SM‐6440BK style)
136 Shiny black plastic (AS) Inner wall (SM‐6440BK/ all SM‐6840/ SM‐6440SL/ 1625‐91BK styles)
137 Black foam with adhesive Pad of bottom (SM‐6440BK/ all SM‐6840/ SM‐6440SL/ 1624‐82BL styles)
138 Translucent soft plastic (Silicone) Gasket (SM‐6440BK/ SM‐6440SL styles)
139 Deep red coating On outer wall (SM‐6840RD style)
140 Deep grey coating On outer wall (SM‐6840BK style)
141 Shiny green coating On outer wall (SM‐6840GR style)
142 Bright blue coating On outer wall (SM‐6840YL style)
143 Silvery coating On outer wall (SM‐6840SL style)
144 Red coating On outer wall (SM‐6675RE style)
145 Dull blue coating On outer wall (SM‐6675BL style)
146 Rare blue plastic (PP‐co) Lid (SM‐6659BL style)
147 Dull translucent green plastic (PP‐co) Straw (SM‐6620TLGR style)
148 Dull clear green plastic (AS) Lid (SM‐6856GR style)
149 Shiny white plastic (AS) Upper body (all SM‐6854 styles)
150 Dull black plastic (ABS) Slider (all SM‐6675/ 1625‐91BK styles); lid/ handle (all 1625‐32 styles)
151 Dull clear blue plastic (Tritan) Lid/ body (SM‐6854BL style)
152 Dull matt blue plastic Flip/ outer wall (SM‐6925YL/ 1625‐29BL styles)
Test Report #: 18H‐009740 Page 141 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
153 Shine blue plastic Outer wall (SM‐6588BL style)
154 Bright navy plastic Outer wall (SM‐6588NY style)
155 Shine red plastic Outer wall (SM‐6588RD style)
156 Dull clear red plastic Bottom (SM‐6856RD style)
157 Matt clear green plastic Bottom (SM‐6856GR style)
158 Matt red soft plastic String of lid (SM‐6856RD style)
159 Dull green soft plastic String of lid (SM‐6856GR style)
160 Bright blue soft plastic Sleeve of body (SM‐6683PBL style)
161 Matt green soft plastic Sleeve of body (SM‐6683LM style)
162 Dark blue soft plastic (TPR) Gasket of flip (SM‐6925YL style)
163 Dull black soft plastic (Silicone) Gasket of lid (SM‐6925YL style)
164 Translucent soft plastic (Silicon) Gasket (all SM‐6657 styles)
165 Translucent soft plastic (Silicon) Gasket (all SM‐6840 styles)
166 Translucent soft plastic (Silicon) Gasket (all SM‐6670 styles)
167 Translucent soft plastic (Silicon) Gasket (all SM‐6856 styles)
168 Translucent soft plastic (Silicon) Gasket (all SM‐6683 styles)
169 Translucent soft plastic (Silicon) Gasket (all SM‐6675 styles)
170 Translucent soft plastic (Silicon) Gasket (all SM‐6659 styles)
171 Translucent soft plastic (Silicon) Gasket (all SM‐6868 styles)
172 Translucent soft plastic (Silicon) Gasket (all SM‐6854 styles)
173 Deep red printed dull silvery metal Lip and Rim of tumbler (SM‐6840RD style)
174 Deep grey printed dull silvery metal Lip and Rim of tumbler (SM‐6840BK style)
175 Shiny green printed dull silvery metal Lip and Rim of tumbler ( SM‐6840GR style)
176 Bright blue printed dull silvery metal Lip and Rim of tumbler (SM‐6840YL style)
177 Silvery printed dull silvery metal Lip and Rim of tumbler (SM‐6840SL style)
Test Report #: 18H‐009740 Page 142 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
178 Shiny blue coating On outer wall (1624‐82BL style)
179 Dull navy coating On outer wall (1625‐13NY/ 1625‐48NY/ 1626‐58NY/ 1626‐01NY/ 1625‐96NY/ 1625‐69NY/ 1626‐13NY styles)
180 Golden coating On outer lid/ bottom (1625‐14WH style)
181 Dull black coating On outer wall (1625‐24BK/ 1626‐50BK/ 1625‐76BK/ 1625‐65BK/ 1625‐53BK styles); handle (1625‐76BK style)
182 Dull green coating On outer wall (1625‐24LM style)
183 Matt blue coating On outer wall (1625‐24NY style)
184 Dull white coating On outer wall (1625‐24WH style)
185 Bright black coating On outer wall (1625‐29BK style)
186 Shiny grey coating On outer wall/ outer lid/ bottom (1624‐74TI/ 1625‐13TI styles)
187 Dull grey coating On outer wall (1625‐48GY/ 1626‐58GY/ 1626‐01GY/ 1625‐69GY styles)
188 Bright red coating On outer wall (1625‐29RD style)
189 Shine green coating On outer wall (1625‐29LM style)
190 Multicolor coating On outer wall/ bottom (1625‐11WD style)
191 Multicolor coating On outer (1625‐14WH style)
192 Matt dull blue plastic (AS) Inner wall (1624‐82BL style)
193 Shine grey plastic (PP‐co) Lid (1624‐82BL style)
194 Dull off blue plastic (PP‐co) Swivel of lid (1624‐82BL style)
195 Dull matt black plastic (Tritan) Lid (1624‐88SL style)
196 Dark blue plastic Handle (1625‐48NY style)
197 Matt grey plastic Handle (1625‐48GY style)
198 Brown soft plastic Inner handle (all 1625‐48 styles); inner handle/ bottom (all 1626‐58 styles); bottom (all 1625‐69 styles)
199 Translucent soft plastic (Silicon) Gasket (1624‐82BL style)
Test Report #: 18H‐009740 Page 143 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
200 Dull black soft plastic (Silicon) Gasket (1624‐88SL style)
201 Black soft plastic (TPR) Gasket of flip (1624‐94IR style)
202 Dull black soft plastic (Silicon) Gasket (1624‐94IR style)
203 Translucent soft plastic (Silicon) Gasket (all 1625‐13 styles)
204 Translucent soft plastic (Silicon) Gasket (all 1625‐17 styles)
205 Translucent soft plastic (Silicon) Gasket (1625‐12MT style)
206 Translucent soft plastic Gasket (all 1625‐24 styles)
207 Translucent soft plastic (Silicon) Gasket (all 1625‐29 styles)
208 Black soft plastic (TPR) Gasket of flip (1625‐29BK style)
209 Translucent soft plastic (Silicone) Gasket (all 1625‐48 styles)
210 Red soft plastic (TPR) Gasket of flip (1625‐29RD style)
211 Dull blue soft plastic (TPR) Gasket of flip (1625‐29BL style)
212 Off green soft plastic (TPR) Gasket of flip (1625‐29LM style)
213 Multicolor plated silvery metal Outer wall (1624‐94IR style)
214 Shiny blue printed dull silvery metal Lip & Rim of tumbler (1624‐82BL style)
215 Dull black printed silvery metal Lip & Rim of tumbler (1625‐24BK style)
216 Dull green printed silvery metal Lip & Rim of tumbler (1625‐24LM style)
217 Matt blue printed silvery metal Lip & Rim of tumbler (1625‐24NY style)
218 Dull white printed silvery metal Lip & Rim of tumbler (1625‐24WH style)
219 Black printed silvery metal Lip & Rim of tumbler (1625‐48BK style)
220 Dull grey printed silvery metal Lip & Rim of tumbler (1625‐48GY style)
221 Dull navy printed silvery metal Lip & Rim of tumbler (1625‐48NY style)
222 Sharp grey coating On outer wall (1626‐13GM/ 1626‐12GM/ 1626‐01GM/ 1625‐27GY styles)
223 Matt white coating On outer wall (1626‐13WH/ 1625‐27WH/ 1625‐96WH/ 1625‐69WH styles)
224 Matt grey coating Outer wall (1626‐50GY/ 1625‐76GY/ 1625‐65GY/ 1625‐53GY styles); handle (1625‐76GY style)
Test Report #: 18H‐009740 Page 144 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
225 Turquoise coating On outer wall (1626‐50MTGR/ 1625‐53MTGR styles)
226 Matt navy coating On outer wall (1626‐50NY/ 1625‐76NY/ 1625‐65NY/ 1625‐53NY styles); handle (1625‐76NY style)
227 Dark orange coating On outer wall (1626‐50OR style)
228 Sharp blue coating On outer wall (1626‐50PBL/ 1625‐53PBL styles)
229 Dull red coating On outer wall (1626‐50RD/ 1625‐53RD styles)
230 Off white coating On outer wall (1626‐50WH/ 1625‐76WH/ 1625‐65WH/ 1625‐53WH styles); handle (1625‐76WH style)
231 Flat white coating On outer wall (1626‐58WH/ 1626‐01WH styles)
232 Black/ white inseparable coating On outer wall (1626‐11BK style)
233 Green/ white inseparable coating On outer wall (1626‐11HG style)
234 Blue/ white inseparable coating On outer wall (1626‐11NY style)
235 Multicolor coating On outer wall (1626‐11WH style)
236 Sharp black coating On outer wall (1625‐99BK style)
237 Shine blue coating On outer wall (1625‐99BL style)
238 Bright navy coating On outer wall (1625‐99MDBL style)
239 Shine grey coating On outer wall (1625‐99TI style)
240 Bright white coating On outer wall (1625‐99WH style)
241 Rare white coating On inner wall (all 1625‐32 styles)
242 Deep blue coating On outer wall (1625‐32BL style)
243 Rare blue coating On outer wall (1625‐27RYL style)
244 Soft blue coating On outer wall (1625‐26IRBL style)
245 Purple coating On outer wall (1625‐26IRGD style)
246 Sharp green coating On outer wall (1625‐26IRGR style)
Test Report #: 18H‐009740 Page 145 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
247 Shiny white coating On outer wall (1625‐26IRWH style)
248 Dull matt blue coating On outer wall (1625‐19BL/ 1625‐18BL styles)
249 Transparent coating On outer wall (1625‐19SL style)
250 Matt green coating On outer wall (1625‐19LM style)
251 Off grey coating On outer wall (1625‐18GA style)
252 Matt red coating On outer wall (1625‐18RD style)
253 Dark coppery coating On outer lid/ bottom (9870‐11CR style)
254 Beige coating On outer wall (9870‐11CR style)
255 Off grey plastic (PP‐co) Lid (1626‐58GY style)
256 Matt white plastic (PP‐co) Lid (1626‐58WH style)
257 Flat blue plastic (PP‐co) Lid (1626‐58NY style)
258 Off clear green plastic (AS) Lid (1626‐61GR style)
259 Dull translucent plastic (PE) Straw (all 1625‐18 styles)
260 Off grey plastic Lid/ handle/ bottom (1626‐58GY style); bottom (1625‐69GY style)
261 Matt white plastic Lid/ handle/ bottom (1626‐58WH style); bottom (1625‐69WH style)
262 Flat blue plastic Lid/ handle/ bottom (1626‐58NY style); bottom (1625‐69NY style)
263 Dark grey plastic (PP‐co) Inner lid (9870‐11CR style)
264 Sharp white plastic (AS) Inner wall (1625‐91WH style)
265 Flat off blue plastic (AS) Inner wall (1625‐91BL style)
266 Flat white plastic (ABS) Slider (1625‐91WH style)
267 Off flat blue plastic (ABS) Slider (1625‐91BL style)
268 Matt clear blue plastic (ABS) Slider (1624‐69BL style)
269 Off clear green plastic Lid/ outer wall (1626‐61GR style)
270 Sharp grey plastic Moving part of handle (1625‐32SL style)
271 Deep blue plastic Moving part of handle (1625‐32BL style)
Test Report #: 18H‐009740 Page 146 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
272 Sharp red plastic Handle (1625‐18RD style)
273 Light grey plastic Handle (1625‐18SL style)
274 Deep grey plastic Handle (1625‐18GA style)
275 Off dull blue plastic Handle (1625‐18BL style)
276 Multicolor printed off white plastic Outer lid (all 1626‐01 styles)
277 Black soft plastic Ring of bottom (1625‐37SL style); ring of moving of handle (all 1625‐32 styles)
278 Bright grey soft plastic (Silicone) Gasket/ band of lid (1625‐32SL style)
279 Deep blue soft plastic Band of lid (1625‐32BL style)
280 Dark grey soft plastic Band of lid/ body (all 1625‐19 styles)
281 Bright grey soft plastic (Silicone) Gasket (all 1625‐32 styles)
282 Translucent soft plastic (Silicone) Gasket (all 1626‐13 styles)
283 Translucent soft plastic (Silicone) Gasket (all 1626‐50 styles)
284 Translucent soft plastic (Silicone) Gasket (all 1626‐58 styles)
285 Translucent soft plastic (Silicone) Gasket (all 1626‐61 styles)
286 Translucent soft plastic (Silicone) Gasket (all 1626‐12 styles)
287 Translucent soft plastic (Silicone) Gasket (all 1626‐11 styles)
288 Translucent soft plastic (Silicone) Gasket (all 1626‐01 styles)
289 Translucent soft plastic (Silicone) Gasket (all 1625‐99 styles)
290 Dull black soft plastic (Silicone) Gasket (1625‐37SL style)
291 Dull black soft plastic (Silicone) Gasket (all 1625‐76 styles)
292 Translucent soft plastic (Silicone) Gasket (all 1625‐27 styles)
293 Translucent soft plastic (Silicone) Gasket (all 1625‐26/ 9870‐11CR styles)
294 Translucent soft plastic (Silicone) Gasket (all 1625‐19 styles)
295 Translucent soft plastic (Silicone) Gasket (all 1625‐18 styles)
296 Translucent soft plastic (Silicone) Gasket (all 1624‐87 styles)
297 Translucent soft plastic (Silicone) Gasket (1622‐98CL style)
Test Report #: 18H‐009740 Page 147 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
298 Translucent soft plastic (Silicone) Gasket (all 1625‐96 styles)
299 Translucent soft plastic (Silicone) Gasket (all 1625‐69 styles)
300 Translucent soft plastic (Silicone) Gasket (all 1625‐65 styles)
301 Translucent soft plastic (Silicone) Gasket (all 1625‐53 styles)
302 Translucent soft plastic (Silicone) Gasket (all 1625‐91 styles)
303 Translucent soft plastic (Silicone) Gasket (all 1624‐69 styles)
304 Matt silvery metal Axis of moving part of handle (all 1625‐32 styles)
305 Bright silvery metal Bottom (all 1625‐32 styles)
306 Dull silvery metal Inner wall (all 1625‐18 styles)
307 Off silvery metal Handle (all 1625‐76 styles)
308 Black printed silvery metal Lip & Rim of cup (1626‐13BK style)
309 Sharp grey printed silvery metal Lid & Rim of cup (1626‐13GM style)
310 Dull navy printed silvery metal Lip & Rim of cup (1626‐13NY style)
311 Matt white printed silvery metal Lip & Rim of cup (1626‐13WH style)
312 Black printed silvery metal Lip & Rim of bottle (1626‐01BK style)
313 Sharp grey printed silvery metal Lip & Rim of bottle (1626‐01GM style)
314 Dull grey printed silvery metal Lip & Rim of bottle (1626‐01GY style)
315 Dull navy printed silvery metal Lip & Rim of bottle (1626‐01NY style)
316 Flat white printed silvery metal Lip & Rim of bottle (1626‐01WH style)
317 Sharp black printed silvery metal Lip & Rim of tumbler (1625‐99BK style)
318 Shine blue printed silvery metal Lip & Rim of tumbler (1625‐99BL style)
319 Bright navy printed silvery metal Lip & Rim of tumbler (1625‐99MDBL style)
320 Shine grey printed silvery metal Lip & Rim of tumbler (1625‐99TI style)
321 Bright white printed silvery metal Lip & Rim of tumbler (1625‐99WH style)
322 Dull black printed silvery metal Lip & Rim of mug (1625‐76BK style)
323 Matt grey printed silvery metal Lip & Rim of mug (1625‐76GY style)
Test Report #: 18H‐009740 Page 148 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
324 Matt navy printed silvery metal Lip & Rim of mug (1625‐76NY style)
325 Off white printed silvery metal Lip & Rim of mug (1625‐76WH style)
326 Black printed silvery metal Lip & Rim of tumbler (1625‐69BK style)
327 Dull grey printed silvery metal Lip & Rim of tumbler (1625‐69GY style)
328 Dull navy printed silvery metal Lip & Rim of tumbler (1625‐69NY style)
329 Matt white printed silvery metal Lip & Rim of tumbler (1625‐69WH style)
330 Dull black printed silvery metal Lip & Rim of bottle (1625‐65BK style)
331 Matt grey printed silvery metal Lip & Rim of bottle (1625‐65GY style)
332 Off white printed silvery metal Lip & Rim of bottle (1625‐65WH style)
333 Matt navy printed silvery metal Lip & Rim of bottle (1625‐65NY style)
334 Matt translucent plastic (PP‐homo) Straw (1625‐91WH style); ring of straw (all 1625‐91 styles)
335 Dull translucent blue plastic (PP‐homo) Straw (1625‐911BL style)
336 Dull translucent black plastic (PP‐homo) Straw (1625‐91BK style)
Test Report #: 18H‐009740 Page 149 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SAMPLE PHOTO:
Test Report #: 18H‐009740 Page 150 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SAMPLE PHOTO:
Test Report #: 18H‐009740 Page 151 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SAMPLE PHOTO:
Test Report #: 18H‐009740 Page 152 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SAMPLE PHOTO:
Test Report #: 18H‐009740 Page 153 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SAMPLE PHOTO:
Test Report #: 18H‐009740 Page 154 of 154
QIMA Testing (HK) Limited 3/F Liven House, No. 61 – 63 King Yip Street, Kwun Tong, Kowloon, Hong Kong Tel: (852)3185 8000. The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of QIMA Testing (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
CS-HK-RE005-POLY Ver.12
In December 2018, ANSECO became QIMA.
SAMPLE PHOTO:
‐End Report‐