asv 10 20 brochure
TRANSCRIPT
-
8/2/2019 ASV 10 20 Brochure
1/8
SERIES ASV10 & SERIES ASV20SAFETYRELIEF VALVESTHREADED AND FLANGED
VALUE THROUGH PERFORMANCE!
ACCUSEALSA F E T Y VA LV E S
CACTUS FLOW PRODUCTS
Houston, Texas Longview, Texas
(281) 260-8366 (800) 460-7858 Fax: (281) 260-8376
-
8/2/2019 ASV 10 20 Brochure
2/8
2
ACCUSEAL SAFETYVALVES
OPERATION & FEATURES
ASV10/20 TECHNICAL DATAConstruction:
Inlet Sizes:
Outlet Size:
Connections:
Orifice Sizes:
Certifications:
Service Pressure Range:Temperature Range:
Blowdown:
Seals:
Services:
Capacities:
Springs:
Simple, minimal parts and seals
Same configuration gas or liquid service
1/2 to 2 Standard
1 & 2 Minimum, Standard
Threaded and Flanged
D & E, F & G interchangeable
NBBI, gas/vapor, liquid;
Canadian Registered
15 3000 psig-60o F to 550o F
Fixed
Standard sizes(3), easily replaceable
Standard, NACE, Stainless Steel, Special
High KA values
Meet ASME Code, UG-136(a)(2)
To Accuseal, Valuemeans:
Reliable Product Performance
Responsive Customer Support
Competitive Pricing
On-time Deliveries
The Series ASV10 & ASV20 safety relief valves provide an economical solution for your pressure relief
applications. They are ideal for a variety of gas/vapor and liquid services, including pipelines,
separators, compressors, coolant circulation systems, as well as many unique OEM applications.
These are direct spring operated valves with a fixed blowdown. They utilize a soft seat to ensure
bubble-tight seating. Pressure acting on the seat area overcomes the spring pre-load and opens the
valve at the set pressure.
The spring, assisted by dome pressure, reliably closes the valve once the system pressure drops below
the reseat pressure.
ASV10s and ASV20s open with minimal overpressure to assure protection of your personnel, your
systems, and your investment.
ACCUSEAL offers value through reliable performance of products in service as well as from qualified,
professional personnel supporting the product before and after delivery.
ACCUSEAL meets the requirements of the ASME Boiler and Pressure Vessel Code Sec. VIII, Div. 1 for
Air, Gas, and Liquid. Capacity ratings were established by testing performed at the National Board of
Boiler and Pressure Vessel Inspectors, Columbus, Ohio.
Accuseal safety relief valvesmeet the requirement of theNational Board.
-
8/2/2019 ASV 10 20 Brochure
3/8
3
SERIES ASV10 DIMENSIONS & WEIGHTS
SERIES ASV20 DIMENSIONS & WEIGHTS
Seat Carrier
Retainer
Soft Seat
Seat Body
Metal-to-Metal Seat
Orifice Diameter
Seat Configuration
Spindle Stem
Spindle
Seat GuideSoft Seat
Seat Insert
Metal-to-Metal Seat
Orifice Diameter
Seat Configuration
THREADED - STANDARD:
INLET OUTLET PRESSURE RANGE ORIFICE A B C WEIGHT2
MNPT FNPT (psig) SIZE1 (inches) (inches) (inches) (lbs)
1/2 1 15 - 887 D 3.25 1.95 11.31 7.51/2 1 888 - 1575 D 3.25 1.95 12.31 8.1
3/4 1 15 - 887 D, E 3.25 1.95 11.31 7.5
3/4 1 888 - 3000 D, E 3.25 1.95 12.31 8.1
1 1 15 - 887 D, E 3.25 1.95 11.31 7.6
1 1 888 - 3000 D, E 3.25 1.95 12.31 8.2
FLOW CAPACITIES:For capacities in various fluids see the separate publication ACCUSEAL Capacity Tables.
THREADED - STANDARD:
INLET OUTLET PRESSURE RANGE ORIFICE A B C WEIGHT2
MNPT FNPT (psig) SIZE1 (inches) (inches) (inches) (lbs)
1-1/2 2 15 - 681 F, G 4.33 3.25 10.50 30
1-1/2 2 682 - 3000 F, G 4.33 3.25 12.50 33
2 2 15 - 681 F, G 4.33 3.25 10.50 30
2 2 682 - 3000 F, G 4.33 3.25 12.50 34
1. F = .675 Diameter; A = .357 in2
G = .790 Diameter; A = .490 in2
2. Estimated
C
A
B
C
A
B
-
8/2/2019 ASV 10 20 Brochure
4/8
4
SERIES ASV10/20 DIMENSIONS
INLET OUTLET PRESSURE RANGE ORIFICE A B CANSI# ANSI# (psig) SIZE1 ( inches) (inches) (inches)
1-1/2" 150# 2" 150# 15 - 285 F, G 4.88 4.88 11.00
1-1/2" 300# 2" 150# 286 - 740 F, G 4.88 4.88 13.50
1-1/2" 600# 2" 150# 740 - 1480 F, G 4.88 4.88 13.50
1-1/2" 600# 2" 300# 740 - 1480 F, G 4.88 4.88 13.50
1-1/2" 900# 2" 300# 1481 - 2220 F, G 6.12 6.75 14.74
2" 150# 2" 150# 15 - 285 F, G 5.13 4.88 11.26
2" 300# 2" 150# 286 - 740 F, G 5.13 4.88 11.26
2" 600# 2" 150# 740 - 1480 F, G 6.00 5.13 14.62
2" 600# 2" 300# 740 - 1480 F, G 6.06 6.38 14.68
2" 900# 2" 300# 1481 - 2220 F, G 6.06 6.38 14.68
C
A
B
ASV10 FLANGED - STANDARDINLET OUTLET PRESSURE RANGE ORIFICE A B CANSI# ANSI# (psig) SIZE (inches) (inches) (inches)
1/2 150# 1 150# 15 - 285 D 6.00 4.00 14.12
1/2 300# 1 150# 286 - 740 D 6.00 4.00 14.12
1/2 600# 1 150# 740 -1480 D 6.00 4.00 14.12
1/2 600# 1 150# 740 -1480 D 6.00 4.00 15.11
1/2 600# 1 300# 740 -1480 D 6.00 4.00 15.11
1/2 900# 1 300# 1481 - 15451 D 6.00 4.00 15.11
3/4 150# 1 150# 15 - 285 D, E 6.25 5.00 14.37
3/4 300# 1 150# 286 - 740 D, E 6.25 5.00 14.37
3/4 600# 1 150# 740 - 845 D, E 6.25 5.00 14.37
3/4 600# 1 150# 846 - 14801
D, E 6.25 5.00 15.373/4 600# 1 300# 846 - 14801 D, E 6.25 5.75 15.37
3/4 900# 1 300# 1481 - 15451 D, E 6.25 5.75 15.37
1 150# 1 150# 15 - 285 D, E 6.25 5.00 14.37
1 300# 1 150# 286 - 740 D, E 6.25 5.00 14.37
1 600# 1 150# 740 - 845 D, E 6.25 5.00 14.37
1 600# 1 150# 846 - 14801 D, E 6.25 5.00 15.37
1 600# 1 300# 846 - 14801 D, E 6.25 5.75 15.37
1 900# 1 300# 1481 - 15451 D, E 6.25 5.75 15.37
B
C
A
ASV20 FLANGED - STANDARD
-
8/2/2019 ASV 10 20 Brochure
5/8
5
SERIES ASV10/20 ACCESSORIES
INLET PORTA 1/4 NPT inlet port can be provided on the
Inlet sub to install instrumentation like a
pressure gage, or apply pressure below the
seat to test the valve, in combination with a
full-bore block valve upstream.
SPECIAL CONNECTIONSAND MATERIALS
ACCUSEAL offers special inlet and outlet connections, other than as shown on
page 4, to your exact specifications, as well as specialty alloys and elastomers
to meet your special service conditions.
22
11
SPRING CARTRIDGESSpring Cartridges, which include the Spring and the
required Spring Bearings, are provided to change setpressures. Springs meet Code requirements.
OTHERACCESSORIESACCUSEAL can also provide peripheral equipment to complete your
relief valve installation, including gaskets, bolting, discharge piping, and vent caps.
For details, discuss the above options further with an ACCUSEAL sales specialist at (903) 247-0006.
LIFT LEVERASSEMBLY
A lift lever assembly is available for all sizes to test the
operation of the valve assembly. By turning the outer
handle, the inner rod is lifted which in turn picks up
the bottom of the spring, relieves the spring preload,
and allows the inner piston to open. By ASME Code,
lift levers are mandatory for applications in air, or
water above 140o
F. For all other applications, this
feature is optional.
-
8/2/2019 ASV 10 20 Brochure
6/8
6
SERIES ASV10 MATERIALS OF CONSTRUCTION
SERIES ASV20 MATERIALS OF CONSTRUCTION
SERVICEITEM DESCRIPTION
STANDARD NACE STAINLESS STEEL1 Cap Carbon Steel Carbon Steel/Stainless Steel Stainless Steel2 Body WCB WCB/CF8M CF8M3 Adj Shaft Carbon Steel Stainless Steel Stainless Steel4 Spring Bear ing Carbon Steel Stainless Steel Stain less Steel
5 Shaft Stainless Steel Stainless Steel Stainless Steel6 Head Stainless Steel Stainless Steel Stainless Steel7 Seat Carrier Stainless Steel Stainless Steel Stainless Steel8 Seat Retainer Stainless Steel Stainless Steel Stainless Steel9 Seat Body Stainless Steel Stainless Steel Stainless Steel
10 Cage Stainless Steel Stainless Steel Stainless Steel11 Inlet Sub Carbon Steel Stainless Steel Stainless Steel12 Spring Stainless Steel Inconel Stainless Steel13 Retainer Screw Stainless Steel Stainless Steel Stainless Steel14 Lock Wire Stainless Steel Stainless Steel Stainless Steel15 Lead Seal Lead Lead Lead16 Nameplate Stainless Steel Stainless Steel Stainless Steel17 Drive Pins Stainless Steel Stainless Steel Stainless Steel18 O-Ring Elastomer Elastomer Elastomer19 O-Ring Elastomer Elastomer Elastomer20 Quad Ring Elastomer Elastomer Elastomer21 Lock Nut Carbon Steel Stainless Steel Stainless Steel22 Pipe Plug(Optional) Stainless Steel Stainless Steel Stainless Steel
SERVICEITEM DESCRIPTIONSTANDARD NACE STAINLESS STEEL
1 Cap Carbon Steel Carbon Steel/Stainless Steel Stainless Steel2 Body, 1.0 WCB WCB/CF8M CF8M3 Adj Shaft Carbon Steel Stainless Steel Stainless Steel4 Lock Nut Carbon Steel Stainless Steel Stainless Steel5 Spindle Stem Stainless Steel Stainless Steel Stainless Steel6 Spring Guide Stainless Steel Stainless Steel Stainless Steel7 Spring Stainless Steel Inconel Stainless Steel8 Spindle Stainless Steel Stainless Steel Stainless Steel9 Seat Guide Stainless Steel Stainless Steel Stainless Steel
10 Seat Insert Stainless Steel Stainless Steel Stainless Steel11 Inlet Sub Carbon Steel Stainless Steel Stainless Steel12 Quad Ring Elastomer Elastomer Elastomer13 O-Ring Elastomer Elastomer Elastomer14 O-Ring Elastomer Elastomer Elastomer15 Lock wire Stainless Steel Stainless Steel Stainless Steel16 Lead Seal Lead Lead Lead17 Nameplate Stainless Steel Stainless Steel Stainless Steel18 Drive Pins Stainless Steel Stainless Steel Stainless Steel19 Spindle Lock Nut Stainless Steel Stainless Steel Stainless Steel20 O-Ring Elastomer Elastomer Elastomer
11
16
5
6
7
17
8
18
10
20
1
3
19
2
4
12
9
13
4
5
17
20
6
18
7
19
8
9
10
13
14
11
2
12
-
8/2/2019 ASV 10 20 Brochure
7/8
7
SERIES ASV10/20
PRODUCT NOMENCLATURE CODEA 10 E 4 1 N 0 A - 1440
ACCUSEAL SERIES ORIFICEINLET/OUTLET
CONNECTION SEAT TYPE MATERIAL CODE VARIATION SET PRESSURESIZE
A 10 D 2 1/2 x 1 1 M X F N Nitrile 0 CS Standard A Standard 0050
E 3 3/4 X 1 2 150 X 150 V Viton 1 CS Low Temperature B Inlet Port 0150
4 1 X 1 3 300 X 150 S Special 2 CS Nace C Lift Lever 1440
20 F 5 1 1/2 X 2 4 300 X 300 3 CS Low Temperature Nace D CDTP
G 6 2 X 2 5 600 X 150 4 SS Standard
6 600 X 300 5 SS Nace
7 600 X 600
S Special
METALS TYPE DEGREES F DEGREES C ELASTOMERS DEGREES F DEGREES CCarbon Steel A108 -20 to 500 -29 to +260 Viton -15 to +450 -23 to +232
WCB -20 to 500 -29 to +260 Nitrile -65 to +250 -48 to +121LCC -50 to 500 -46 to +260 EPDM -65 to +325 -48 to +163
Stainless Steel 304/316 -423 to 650 -253 to +343 Neoprene -35 tp +225 -37 to +107
17-7 -423 to 650 -253 to +343 Kalrez 0 to +500 -18 to +260CF8M -423 to 650 -253 to +343 Chemraz -22 to +500 -30 to +260Inconel X750 -423 to 750 -253 to +399 Aflas +25 to +450 -4 to +232Elgiloy -423 to 750 -253 to +399
MATERIAL TEMPERATURE LIMITS - TYPICAL
X* DESCRIPTION BODY SPRING0 CS Standard WCB Stainless Steel1 CS Low Temperature LCC Stainless Steel2 CS Nace WCB Inconel3 CS Low Temperature Nace LCC Inconel4 SS Standard CF8M Stainless Steel5 SS Nace CF8M Inconel
METALLIC MATERIAL CODE:
Accuseal safety relief valves meet the requirement of the National Board.
-
8/2/2019 ASV 10 20 Brochure
8/8
ACCUSEALSA F E T Y VA LV E S
All specifications and materials are subject to change without notice. 09/2008 Printed in U.S.A.
CACTUS FLOW PRODUCTS
LIMITED PRODUCT WARRANTYThe following warranty is exclusive and in lieu of all other warranties. Whether express, implied or statutory, including,
but not by way of limitation, any warranty of merchantability or fitness for any particular purpose.
Accuseal warrants to each original buyer of products manufactured by Accuseal that such products are free from
defects in material and workmanship under normal use and service for a period of two (2) years from the date of
shipment provided that no warranty is made with respect to: Any product which has been repaired or altered in such a
way in Accuseals judgment, as to affect the product adversely; Any product which has, in Accuseals judgment, been
subject to negligence, accident or improper storage; Any product which has not been operated or maintained in
accordance with normal practice and in conformity with recommendations and public specification of Accuseal; valve
without nameplate, missing or removed.
Accuseals obligation under this Warranty is limited to use reasonable efforts to repair, replace or, at its option,
refunding the purchase price. The cost of labor for installing a repair or replacement product shall be borne by
Purchaser. Replacement parts provided under the terms of this Warranty are warranted for the remainder of the
warranty period of the products upon which they are installed to the same extent as if such parts were original
components thereof. Warranty services provided there under do not assume any liability for damages caused by any
delays involving warranty service. For complete specification information, prices and name, address and telephone
number of the Accuseal representative nearest you, call or write to us at the address below.
15721 West Hardy St. 506 West Harrison Road
Houston, Texas 77060 Longview, Texas 75604
Phone: (281) 260-8366 Phone: (903) 247-0006
Fax: (281) 260-8376 Fax: (903) 759-3475
800-460-7858
VALUE THROUGH PERFORMANCE!