assessment activity 3.1
TRANSCRIPT
Assessment activity 3.1
BTEC Level 3
The scenario: P1, M1, D1, P2, P3
• You are working for a company making electrical power lines and due to the austerity measures brought in by the coalition government you have been asked to review the material selection for these power lines.
• Resistance is what causes millions of pounds of waste due to loss of electrical energy via heating. How can this be reduced?
To do
P1: State what you plan to achieve
P2: Use research notes, and list your notes in rough according to the suggested protocol (see textbook) ready for your final report
P1: Produce a concise hypothesis from your research (if… then…)
To do
M1: Draw a table of your research references showing the information from each. Analyse which ones are relevant to your work and which ones are not and discuss giving reasons
To do
P3: Write out a method
D1: Outline any other methods you may have considered and give the
reasons to justify your final choice
Grading tips
• To achieve P1, P2 and M1 make sure you provide good points of reference and background information from many sources. List each source as you work through them
• To achieve P3 include descriptions of the main aspects covered in ‘Method’ in the textbook
• There are various ways to approach the investigation, make sure you evaluate them fully to achieve D1