assembly instructions ergotron desk standstatic.highspeedbackbone.net/pdf/ergotron-lx... ·...
TRANSCRIPT
888-45-046-01 rev.F • 07/06
1 of 10
A B C D E
1
2
3
4
LX2
LX3
4mm
M4 x 10mmM4 x 10mm
M8x20mm
M6x12mm
1x 1x 1x
2x
2x
29"(738 mm)
44.25"(1125 mm)
LX2
LX3
or
2xor3x
2x
1x
8xor
12x
Ergotron Desk StandASSEMBLY INSTRUCTIONS
M4x25mm
2xor3x
Ergotron Desk Stand• 5" (127 mm) height range
• Displays tilt +15/-5° forward/back
• Displays pan ±10° right/left
• Displays slide side-to-side right/left
• Displays rotate 90° portrait/landscape
• Total weight capacity:
LX3 adjust to hold displays between
24 - 48 lbs (10.9 - 22 kg)
LX2 adjusts to hold displays between
12 - 28 lbs (5 - 13 kg)
• Internal cable management routes cables neatly along crossbar
• 5 year warranty
8xor
12x
8xor
12x
USA 1-800-888-8458Europe +31 (0)33-45 45 600
888-45-046-01 rev.F • 07/06
2 of 10
1
22x
M8x20mm
a
a
b 2xM6x12mm
b
6°0°
888-45-046-01 rev.F • 07/06
3 of 10
75 x 75mm3 100 x 100mm
3 4
Top
4xM4 x 10 mm
InsetM4x25mm
4x
75 x 75mm
888-45-046-01 rev.F • 07/06
4 of 10
Top
4xM4 x 10 mm
Inset
M4x25mm4x
100 x 100mm
a b
888-45-046-01 rev.F • 07/06
5 of 10
LX2
5
a b
WARNING:TIPPING HAZZARD!
1
2
3
4
1
2
3
LX3
888-45-046-01 rev.F • 07/06
6 of 10
62x
a
b
888-45-046-01 rev.F • 07/06
7 of 10
+15˚
-5˚
7
5"(127 mm)
4mm
Adjust Lift – Up and down
To increase tension- Turn Clockwise
To decrease tension- Turn Counterclockwise
CAUTIONDO NOT overtighten fasteners. Overtightening may cause damage to your equipment.
Adjust Tilt – Forward and Backward
To increase tension- Turn Clockwise
To decrease tension- Turn Counterclockwise
b Tilt – Forward and Backward: If it does not stay in place or movement is stiff, tension needs adjustment. Adjust until motion is equal.
RANGE OF MOTIONThis product is designed to adjust quickly and easily according to your needs – refer to following steps for adjustment.
a Lift – Up and down: If it does not stay in place or movement is stiff, tension needs adjustment. Adjust until motion is equal.
4mm* Adjusters do not have to be in sync to function.
888-45-046-01 rev.F • 07/06
8 of 10
90˚
c Rotate – Portrait/Landscape
8
±10˚ ±10˚
±10˚ ±10˚
±10˚
a Pan – Side-to-side: Loosen knob, reposition monitor, and retighten knob.
b Slide – Side-to-side: Loosen knob, reposition monitor, and retighten knob.
888-45-046-01 rev.F • 07/06
9 of 10
Problem Cause Solution
Display lifts up and down too easily or with diffi culty.
Tension needs adjustment.
Adjust Lift
Exceeds weight capacity:LX3: 24 - 48 lbs. (10.9 - 22 kg).LX2: 12 - 28 lbs. (5 - 13 kg).
Display tilts forward and back too easily or with diffi culty.
Tension needs adjustment.
Adjust Tilt
7
7
? Trouble Shooting
USA 1-800-888-8458Europe +31 (0)33-45 45 600
888-45-046-01 rev.F • 07/06
10 of 10
© 2006 Ergotron, Inc.All rights reserved.
While Ergotron, Inc. makes every effort to provide accurate and complete information on the installation and use of its products, it will not be held liable for any editorial errors or omissions (including those made in the process of translation from English to another language), or for incidental, special or consequential damages of any nature resulting from furnishing this instruction and performance of equipment in connection with this instruction. Ergotron, Inc. reserves the right to make changes in the product design and/or product documentation without notification to its users. For the most current product information, or to know if this document is available in languages other than those herein, please contact Ergotron Customer Care at: 800-888-8458 or consult the Ergotron, Inc. website at: www.ergotron.com. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of Ergotron, Inc.,1181 Trapp Road, Eagan, Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc.
For Warranty information in other languages contact customer service. USA 1-800-888-8458
Europe +31 (0)33-45 45 600