asiga max asiga pro 2whipmix.com/wp-content/uploads/20_wm_verisplint_os... · asiga max asiga pro 2...
TRANSCRIPT
Asiga Max Asiga Pro 2
Slice Thickness
Orientation
Number of Units
Print Time (minutes)
Number of Units
Print Time (minutes)
50 microns Horizontal 30 Degrees
3 3
40 85
4 4
80 170
75 microns Horizontal 30 Degrees
3 3
30 60
4 4
55 115
100 microns Horizontal 30 Degrees
3 3
20 45
4 4
40 90
*Max is ~70% faster than the Pro 2.
VERISPLINT™ OS PHYSICAL PROPERTIES
Property Based On ISO 20795-2 Requirement Result
Ultimate Flexural Strength (MPa) ≥ 50 > 100
Flexural Modulus (MPa) ≥ 1500 > 2500
Maximum Stress Intensity Factor (MPa m1/2) ≥ 1.1 1.75
Total Fracture Work (γMPa) ≥ 250 596
Sorption (ųg/mm3) ≤ 32 29
Solubility (ųg/mm3) ≤ 5 < 1
Residual Monomer ≤ 5.0% < 0.10%