asif
TRANSCRIPT
Asif
Career Objective:To work in a challenging and responsible position where my professional background can be
utilized and to update myself with the latest technologies.
EXPERIENCE: 15+ months of experience in PCB design
Working as a Design Engineer in GeoCAD Interconnect Systems LLP, Bangalore.
Job Description:Designing of single, double and multilayer PCB boards having analog, mixed
signal and high speed electronic circuits.
Schematic Capture, error checking, Generating Netlist and preparing Bill of Materials. Footprint creation as per IPC 7351B Major and Discrete components Placement as per customer needs. Transmission line concepts to pursue PCB design. Knowledge on DFM, DFA & DFT Exposure to Signal Integrity & EMI/EMC. Signal grouping and classification. Constraints settings. Plane splitting & Power dropping. Routing - Clock Signals, Critical signals, Differential pair, Bus & Single Ended Traces
with noise consideration. DRC checking and clearing. Gerber layer setting and generating.
Highlight:
Knowledge on Signal Integrity Analysis. Expertise in High Speed Routing,Length Matching like (DDR, SDRAM, PCI and PCIX) ,
Constraint setting, Pin pair assignment Back-drill setup. Reverse Engineering Familiar with Through hole, micro,blind and buried via concepts. Knowledge on Impedances and importance of impedance matching.
Skill Set: EDA (Engineering Design Automation) Tools :
PCB Design Tools :Cadence(Allegro 16.6), Altium Designer 14.3,PADS 9.5 Schematic Design tools :Orcad captureCIS,Altium Designer 14.3,PADS logic 3D Modeling : HFSS 14 Verification Tool : CAM350
Operating Systems : Windows Application Packages :Ms-office, Excel Programming Languages : LabVIEW, Assembly Language, C
Projects:1.Buck Charger Card(Allegro):
The Buck charger card is a power circuit board has 8-bit CMOS flash Microcontroller
and IGBT Modules.Features:
Signals are routed without any vias 2 layer stack up with 63mils Board thickness. Minimum pitch across pins are 50mils. 30mils trace width & 40mils spacing.
2.Solar Charger Card(Allegro):
It is a Power circuit Board has Pulse Transformer, IC 555 and Gates.
Features:
Signals are routed without any vias 2 layer stack up with 63mils Board thickness. Minimum pitch across pins are 50mils. 30mils trace width & 40mils spacing.
3.NOVA Test Vehicle (Allegro):
Test Vehicle Board has 2 NOVA Processors, 2 DDR3 SDRAM (96 Balls) and One LPDDR (178 Balls).Features:
Number of pins in BGA is 625 pins 12 Layers stack up with 76.8 mils thickness Created Bill Of Material (BOM) LVDS (Low Voltage Differential Signaling)
4.Security Locker(Reverse Engineering)(Allegro)
The security locker board has GSM-SIM900A and ATmega128A8-bit Microcontroller with 128Kbytes In-System Programmable Flash. Also has ACCELEROMETER SENSOR-ADXL335, Alarm,Door Sensor and LCD display.Features:
Schematic captured from PCB 4 Layers stack up with 63 mils Symbols created for all components Created Bill Of Material (BOM)
5.General Boards:
I have designed various types of High speed Design(HSD) , General purpose and Industrial boards such as Transmitter, Receiver and Sensor Boards.
Captured Various Schematics(Orcad,PADS Logic and Altium)
Academic Projects:1.Low Power Wireless Sensor Network for Building Monitoring :
A wireless sensor network is proposed for monitoring buildings to prevent and assess earthquake damage.
2.Digital Mileage Projector with Fuel Indicator: The project is to indicate the fuel level and the distance the vehicle travels in that fuel
using the microcontroller
ACADEMICS QUALIFICATION:
Course InstitutionBoard/
UniversityYear of
CompletionPercentage/
CGPA
B.E,(Electronics & Communication
Engineering)
Sri Ramakrishna Engineering College, Coimbatore.
Anna University Chennai
2014 7.74/10
Diploma in Instrumentation & Control
Engineering
Govt. Polytechnic College,
Udhagamandalam.DOTE 2011 93
SSLCSt. Joseph’s higher secondary school, Udhagamandalam.
State Board 2008 85
TECHNICAL EXPOSURES:
Undergone Internship Project in CALIBER EMBEDDED TECHNLOGY PVT LTD, Coimbatore
Attended “Matlab Technology” training conducted by MEZOBLANCA SOLUTIONS, Coimbatore.
Completed In-plant Training in SALZER ELECTRONICS LTD, Coimbatore. Undergone In-plant Training in BSNL,Coimbatore. Industrial automation using PLC (Duration 3 months) Embedded system design (Duration 3 months) NI LabVIEW (Duration 5 Days)
PERSONAL DETAILS
Name : Mohammed Asif.M
Date of Birth : 21-Feb-1993
Gender : Male
Languages Known : Tamil, English and Hindi
Father’s Name : Mohammed Yusuf
Marital Status : Single
Nationality : Indian
Email :[email protected]
Contact Number : 9894376970
Address : 266A, Jayanthy Nagar,
Glenmorgan, Sandinallah post,
The Nilgiris,
Tamilnadu-643 237.
DECLARATION
I hereby declare that the above written particulars are true to the best of my knowledge
and belief.
Yours faithfully,
[Mohammed Asif]
Place: BangaloreDate: