ARTICULATING CRANES

What sets Venturo cranes apart from the competition? Here are several points of value an end user should think about when considering a Venturo crane.

Venturo cranes are quality engineered & built to withstand the everyday work load demands of crane users even in extreme conditions. A properly maintained Venturo crane will provide years of reliable service. It’s very common to have 15-20 year old Venturo cranes still used in regular service.

Venturo offers three families of cranes that will cover most end user needs:

Venturo Fully Hydraulic cranes – 5000 lbs. to 11,000 lbs. max capacities.

Venturo Electric-Hydraulic – 2000 lbs. to 6000 lbs. max capacities.

Venturo Mast Cranes - 1500 lbs. to 2000 lbs. max capacities.

Venturo H.D. Crane Utility Bodies for 4000-11,000 lbs. rated cranes. for 60’ / 84” / 120” CA / variety of cabinet configurations & options. Popular 11’ / 84” CA mechanic bodies in stock for immediate delivery in Cincinnati, Ohio.

BOSS Air Compressors – a variety available in the most popular sizes.

Ferrari Articulating Cranes – a variety of sizes. Popular 500 series usually in stock in Cincinnati, Ohio for immediate delivery.

With years of experience, our customer support has been described as some of the best. Expert knowledge, service and quick response is key to our customer support. Our technical assistance will keep you running that very same day, our parts in house, ordered before 3 pm will out the door same day and you speak with a real human when calling in.

With the recent factory expansion, upgrades to process and equipment, our production efficiency has enabled us to keep our lead times on cranes well-below our competitors. Current factory lead times on cranes average from less than a week on some models to 1-3 weeks on larger models.

For those end users concerned with the upcoming November of 2017, OHSA Crane Operator Certification requirements, Venturo offers VTS Training Services, done by Dave Foster, VP of Production, Owner, Venturo Cranes. Dave is a recognized industry leader in Crane Training and Certification. Topics including Mechanic’s/Service Truck NCCCO Prep Training, Crane Operator & Safety Training, Crane, Wire Rope & Hook Inspections, Employer/Operator Responsibilities & Record Keeping, and much more. Operator Certification will be required for any crane that can lift more than 2000 lbs. Contact your Venturo Territory Sales Rep. to schedule a call with Dave to find out more details.

Not just a phrase, but a basic principal & philosophy of Brett Collins, President & Owner of Venco-Venturo. For over 50 years, straight talk, high quality, reliable products & customer service is what has brought value to Venco-Venturo customers and will continue to do so into the future.

Types of End Users and Markets for Truck Mounted Service Crane Applications

Municipalities - for a variety of uses, loading equipment on/off trucks; loading dead animals; loading tree stumps; sewer lids; steel street plates used during road construction; pulling and servicing sewage water pumps; as a mechanics service truck for working on city or county owned equipment --- many smaller communities have private contract companies that do all of these things. ET and Mast cranes are very popular in many of these applications, except water pumps pulling in which HT cranes are best.

Rental Equipment Companies - Rental Truck Companies - any Heavy Equipment company, such as CAT dealers; John Deere dealers, etc.. That have equipment they are responsible to service in the field. HT cranes with proportional controls are very popular in this industry.

Propane-Energy Service Companies - would typically need a crane to set propane or oil tanks. HT cranes, especially the HT40 with proportional controls is very popular in this industry.

Well Drilling Companies - for either water wells or fracking related companies. Depending on

companies these will use a wide variety of sizes to pick up well casings and pipe lines.

Grave Stone / Monument Companies - very common to use an ET crane, to set head stones,

crane is often facing backwards on flatbed truck, mounted in the center.

Building Materials Delivery and Construction Installation Companies - very common to all

types of cranes to load granite counter tops / roofing materials, 55 gallon drums of chemicals or

large bins of products to job sites. A variety of cranes used to load equipment on and off trucks,

such as concrete finishing machines and land scape vibrating plate machines which often way

200-300 lbs.

Fleet Service Companies / Road Contractors etc. - almost all have mechanics service trucks

for the fleets.

Factories / Recreational & Induatrial Boat Docks / River Companies - factories and industrial

places will often have use for mostly ET or Mast Cranes. Anything involved with water will use

both ET & HT cranes to put things like portable docks or smaller boats in and out of the water.

Venco Venturo Team Key Contacts

1. Sandy Riley / Inside Sales Manager Help when needed to determine proper crane / hoist / product pricing minor technical issues / customer service etc. Office: 800-226-2238 / 7:30am – 4:30pm EST Monday - Friday Email: sriley@venturo.com

2. To Place An Order by fax: 513-326-5427 By e-mail: sriley@venturo.com All Venco-Venturo new unit orders must be in writing by either e-mail or fax. All new unit orders automatically generate an “Acknowledgement of Order”. Acknowledgements of Orders contain listing product quantities, product pricing; shipping address; billing address; target ship date; etc. Please review Acknowledgments for accuracy on all information. Acknowledgements are sent either by e-mail or fax to an e-mail address or a fax number chosen by customer.

3. Tom Davis / Technical Support Trouble shooting of any problems related to cranes and /or conversion hoists. Office: 800-226-2238 / 8:00am – 5:00pm EST Monday - Friday Email: tdavis@venturo.com

4. Gary Hargis / Parts Support For all models of cranes and hoists. Office: 800-226-2238 / 8:00am – 5:00pm EST Monday - Friday Email: parts@venturo.com or ghargis@venturo.com

5. Ian Lahmer / Marketing

Request for literature and / or Co-op marketing; advertising; promotions; support Office: 513-772-8448 x131 / 8:00am – 5:00pm Monday - Friday Email: ilahmer@venturo.com

6. Dave Foster / VTS Training Manager Inquiries for crane training, distributor & fleet training, hoist installation training and crane body installation training. Office: 800-226-2238 / 7:30am – 4:30pm Monday – Friday Email: dfoster@venturo.com

7. Accounting Department Questions about invoices, payments and credits for your account. Office: 513-772-8448 x106 / 8:00am – 5:00pm Monday – Friday Email: accounting@venturo.com

Getting to the Correct Size & Right Type Crane for a Given Application

Three Steps to Help Determine What Venturo Crane Best Fits a Given Situation:

1. Determine What Size of Crane is Needed based on Foot Pound Rating required.

Foot Pound Rating --- based on Foot Pound Rating required. To find out what the foot pound rating should be ---find out the weight of the max load that will be lifted & what would be the max distance that load will be moved away from the center line of the crane---Using those two numbers you can determine Foot Pound Rating by multiplying those numbers together --- the resulting number would be the foot pound rating of the size of the crane needed.

Note: Venturo HT and ET cranes are numbered in Foot Pound Ratings—ie—ET12 is 12,000 foot pound crane / HT25 is a 25,000 foot pound crane / HT50 is 50,000 foot pound rated crane; etc.

Example 1: Max weight to be lifted is 5000 lbs. The crane has to take 5000 lbs. a distance of 10’ away from the center line of the crane. 5000 lbs. x 10 feet would be 50,000 which would mean a 50,000 foot pound rated crane is needed which would be a Venturo HT50. Example 2: Max weight to be lifted is 1390 lbs. The crane has to take 1390 lbs. a distance of 8’ away from the center line of the crane. 1390 lbs. x 8 feet would mean a 11,120 is needed which would mean a 12,000 foot pound crane is needed, so an ET12 would work in this application. Example 3: Max weight to be lifted is 2100 lbs. The crane has to take 2100 lbs. a distance of 11’ away from the center line of the crane. 2100 lbs. x 11 feet would mean a 23,100 foot pound rated crane is needed which would mean an ET25 or HT25 would fit this application. Some HT & ET models have the same max lifting capacity ratings: HT25 & ET25 --- max lifting capacity of 5000 lbs. @ 5 feet from the center line of the crane. HT30 & ET30 --- max lifting capacity of 5000 lbs. @ 6 feet from the center line of the crane. HT40 & ET36 --- max lifting capacity of 6000 lbs. @ 6 feet from the center line of the crane.

What type of crane to use---a “fully hydraulic”--- the Venturo HT family of cranes or an “electric-hydraulic” the Venturo ET family of cranes would be determined by the how often the crane is used and what the end user is picking up.

2. Determining What Type of Crane is Best --- based on how often the crane is used?

This is commonly referred to as the expected “duty cycle” of the crane. Duty cycle means how often any crane is used during a 24 hour period.

How often it would be used during a 1 hour time period?

What type of work is the crane doing? --- although an end user might only be occasionally using their crane, which means an ET Series crane would work, sometimes the job would

require that the crane winch be running longer than a couple of minutes continuously, which would require a fully hydraulic crane. Pulling underground water pumps would be the application that this situation will occur the most. Because the load is possibly being hauled up a long distance from below ground, a hydraulic winch, like those on the HT series cranes is a better fit for the job, even if the crane is only used occasionally.

HT / Fully-Hydraulic Cranes --- (HT25 through HT66 models / 5000 lbs. to 11,000 lbs. max lifting capacities) are designed to be continuous-duty use or for long lifts, such as lifting a water pumps from underground up to the surface. Most HT cranes are ordered as “proportional control cranes”, which means the operator has the ability to vary the speed of any crane function as he is using it, which allows operator to “feather the movements” when needed, such a delicate movement placing a large water pump back in place or working on replacing a transmission on a piece of equipment in the field. Proportional control cranes also have booms that power-extend all the way out. Non-proportional and all ET cranes, (except the ET36) have power boom extension only part of the way out as well as single “ON-OFF” function switches.

ET / Electric-Hydraulic Cranes --- (ET6 through ET36 models / 2000 lbs. to 6000 lbs. max lifting capacities) & the Electric Mast Cranes (1500 lbs. to 2000 lbs. max capacities) have electric winch motors to lift loads and are designed for “intermittent duty” or “occasional use” cranes. Each individual crane’s electric winch will have a different constant run time allowed, but most of them are between 1.5 - 3 minutes running continuously. Also, typically these winches are not designed to be used more than a total of 10-15 minutes of use during any given hour. Operator controlled crane functions on the ET and Mast Cranes are either in the “ON or OFF” position. ET and Mast Cranes have a variety of booms that are either partially powered out and then manual, or completely manual, except the ET36, which power booms out to 20’ its max boom length.

3. Determine if Their Truck is the Right Size & Type --- for the crane size they need.

Minimum truck GVWR ratings are listed on the back of the brochures for all Venturo cranes, on each individual crane spec sheet as well the listing just below for the HT & ET crane families. (Note: smaller Mast Cranes don’t have a GVWR listing as they will fit on virtually any size truck).

For HT Series Cranes---A PTO or some other means to drive a hydraulic pump will be needed to drive the hydraulic systems on these types of cranes and outriggers. Several types of outriggers are available for HT type cranes---manual out & down, manual out & hydraulic down and on the larger models, hydraulic out & hydraulic down. See pricing sheet for details on other commonly needed items for these types of cranes.

ET / Electric-Hydraulic crane / ET models and all Mast Cranes --- don’t need PTO as they are self-contained units and run off the 12 volt electrical system of the truck. Most outrigger systems for these occasional use cranes are manual, however there is an option for “manual out and hydraulic down”. See pricing sheet for a more detailed description as well as other commonly needed items for these types of cranes.

Venturo Heavy Duty Crane Bodies: Typically recommended and used for Venturo Cranes that are 16,000 FT-LBS and larger size cranes, (typically ET16KX and bigger electric-hydraulic cranes and HT fully-hydraulic cranes.)

HT25 bodies are rated to handle up to 30,000 foot pound rated cranes.

HT40 bodies are rated to handle up to 40,000 foot pound rated cranes.

HT50 bodies are rated to handle up to 50,000 foot pound rated cranes.

HT66 bodies are rated to handle up to 66,000 foot pound rated cranes.

Venturo Crane Bodies come built to handle 60” CA / 84” CA and 120”CA truck lengths.

Venturo Crane Bodies are available in a variety of cabinet configurations with standard features such as diamond plate floor deck / dual automotive weather seal on doors / stainless steel hardware / continuous drip edge / 5000 lbs. pull-out rated D-rings in the bed / engineered ladder frame base to distribute stress to the entire frame of the truck / heavy duty crane boxes / factory installed outrigger tubes-front and back

Venturo Crane Bodies have a variety of options available, such as LED interior cabinet lights / roller drawers / master locking system / work bench bumpers / grip strut steps; etc.

Venturo Crane Bodies all have a 6-Year Rust-Through Warranty

Popular 11’ / 84” CA mechanics bodies in all sizes are usually in stock for immediate shipment in Cincinnati.

Types of End Users and Markets for Truck Mounted Service Crane Applications

Municipalities - for a variety of uses, loading equipment on/off trucks; loading dead animals; loading tree stumps; sewer lids; steel street plates used during road construction; pulling and servicing sewage water pumps; as a mechanics service truck for working on city or county owned equipment --- many smaller communities have private contract companies that do all of these things. ET and Mast cranes are very popular in many of these applications, except water pumps pulling in which HT cranes are best.

Rental Equipment Companies - Rental Truck Companies - any Heavy Equipment company, such as CAT dealers; John Deere dealers, etc.. That have equipment they are responsible to service in the field. HT cranes with proportional controls are very popular in this industry.

Propane-Energy Service Companies - would typically need a crane to set propane or oil tanks. HT cranes, especially the HT40 with proportional controls is very popular in this industry.

Well Drilling Companies - for either water wells or fracking related companies. Depending on

companies these will use a wide variety of sizes to pick up well casings and pipe lines.

Grave Stone / Monument Companies - very common to use an ET crane, to set head stones,

crane is often facing backwards on flatbed truck, mounted in the center.

Building Materials Delivery and Construction Installation Companies - very common to all

types of cranes to load granite counter tops / roofing materials, 55 gallon drums of chemicals or

large bins of products to job sites. A variety of cranes used to load equipment on and off trucks,

such as concrete finishing machines and land scape vibrating plate machines which often way

200-300 lbs.

Fleet Service Companies / Road Contractors etc. - almost all have mechanics service trucks

for the fleets.

Factories / Recreational & Induatrial Boat Docks / River Companies - factories and industrial

places will often have use for mostly ET or Mast Cranes. Anything involved with water will use

both ET & HT cranes to put things like portable docks or smaller boats in and out of the water.

ELECTRIC TELESCOPIC CRANES Venturo Autocrane IMT Stellar Liftmoore Palfinger

CE1500FB

CE6K-3 Econo-Ton II EC2000 L-21

Econo-Ton II R 2003i EC2000-P 206R

CE6K-4

CT2003FB

CT2005

CT310KX

1.5/10

DT7K 2003 2000A

206EL

206R

206REL

ET6K 2003-E

2703-E WS65

ET8K 2700AR

ET8KX

1015

ET12K 3203PR 3203i EC3200 3200REL

ET12KX 3203PRX 3203i 1032X PCS3216

3203H

ET16KX 4004EH

ET18KX 4004i EC4000 4000X PCS4016

1640X PCS4025

ET25KX 5005EH 2020 EC5000 5000WX PCS5025

2820

ET30KX 5005i

ET36KX 6006EH 6000i EC6000 6036W & DX PCS6025

HYDRAULIC TELESCOPIC CRANES Venturo Autocrane IMT Stellar Liftmoore Palfinger

WS65

3203H 1015 3315 1032

4420 1640 PSC 3216

HT25KX HC-6 2020 PSC 4025

HT30KX 5005H 2820 5521 5031 PSC 5025

HT40KX 6406H 6000 PSC 6025

HC-7 7621 6541

7500 7628

HT50KX HC-8 8051 PSC 4329

8406H 8600 9621 8059

HC-9

9500

10006h 10000 10621

10628

HT66KX 1061 PSC 6229

12006H 12000 12621 1069

12628 PSC 7229

14005H 14000 14528 1479 PSC 8629

Hydraulic Telescopic Cranes MODEL FT-LB RATING MAX LIFT

CAPACITY BOOM LENGTH MIN GVWR WEIGHT (LBS)

HT66KX 66,000 11,000 12’ – 18.5 – 25’ 33,000 2,500

HT50KX-25 50,000 8,000 12’ – 18’ – 25’ 20,500 2,125

HT50KX 50,000 8,000 10’ – 16’ – 20’ 20,500 1,925

HT40KX-25 40,000 6,000 12’ – 18’ – 25’ 14,500 2,100

HT40KX 40,000 6,000 10’ – 16’ – 20’ 14,500 1,900

HT30KX 30,000 5,000 10’ – 16’ – 20’ 11,000 1,300

HT25KX 25,000 5,000 10’ – 16’ – 20’ 10,500 1,300

Electric Telescopic Cranes MODEL FT-LB RATING MAX LIFT

CAPACITY BOOM LENGTH MIN GVWR WEIGHT (LBS)

ET36KX 36,000 6,000 10’ – 16’ – 20’ 14,500 1,500

ET30KX 30,000 5,000 10’ – 16’ – 20’ 11,000 1,350

ET25KX 25,000 5,000 10’ – 16’ – 20’ 10,500 1,350

ET18KX 18,000 4,500 8’ – 12’ – 16’ 10,500 1,020

ET16KX 16,000 4,000 8’ – 12’ – 16’ 10,500 1,020

ET12KX 12,000 3,500 7’ – 11’ – 15’ 8,800 700

ET12K 12,000 3,500 7’ – 11’ – 15’ 8,800 610

ET8KX 8,000 2,700 6’ – 10’ – 14’ 8,000 650

ET8K 8,000 2,700 6’ – 10’ – 14’ 8,000 560

ET6K 6,000 2,000 6’ – 10’ 8,000 380

DT7K 7,000 2,200 6’ – 10’ 8,000 310

Electric Mast Telescopic Cranes MODEL MAX LIFT

CAPACITY BOOM LENGTH ROTATION BOOM TYPE WINCH

CT310KX 1,900 3’ – 9’3” POWER P –Ext / P –Elev HD/DC

CT2003FB 2,000 3’ – 5’ MANUAL FB DC, AC

CT2004FB 1,500 4’ – 7’ MANUAL FB DC, AC

CT2005 1,200 5’ – 9’ MANUAL FIXED DC, AC

CE6K-3 2,000 3’ – 5’ MANUAL FB DC, HD/DC, AC

CE6K-4 1,500 4’ – 7’ MANUAL FB DC, HD/DC, AC

CE1500FB 1,500 3’ – 5’ MANUAL FB DC, AC

Heavy Duty Crane Service BodiesMODEL MINIMUM GVWR CRANE MODELS CAB TO AXLE LENGTH

HT66 33,000 HT66KX 84” – 120” 11’ – 14’

HT50 20,500 HT50KX 84” – 120” 11’

HT40 14,500 HT40KX, ET36KX 84” 11’

HT25 10,500 HT30KX, ET30KX 60” – 84” 9’ – 11’

The Venturo ET6K was introduced in February 2015 as the newest model to the Venturo Electric Crane Line. This crane has many selling points and would be ideal for municipalities and fleets with multiple vehicles and operators or a general service application for the budget-minded company.

Pricing for the ET6K is market priced to fit budget needs which is extremely competitive in the industry.

The low weight of the crane helps increase the amount of applications this crane can be installed upon. At 380 LBS, this crane is one of the most light-weight cranes of its size and capacity.

November 10, 2017, the new OSHA 1926.1427 law requires certification of crane operators of cranes more than 2,000 LBS. The ET6K falls below these requirements.

The ET6K crane is a light-weight, cost-effective choice for a variety of industries and general service applications on any truck with a GVWR of 8,000 LBS or more. Built with the same rugged design and reliable heavy-duty components of Venturo’s higher capacity models, yet exempt from OSHA operator certification requirements, the ET6K provides a solution anyone can use to add a crane to their truck which was previously cost and regulation prohibitive.

2,000 LBS Lifting Capacity

6,000 FT-LBS

Electric – Hydraulic Power

Hydraulic Power Extension

Manual Boom Extension 6’ – 10’

Continuous Power Rotation

High-Efficiency, Heavy-Duty Electric Planetary Winch:

o 26 ft/min at 0 LBS; 18 ft/min at 1,000 LBS

o 12V Permanent Magnet Motor o Dual Braking Systems

Load-Holding Counterbalance Valves on All Cylinders

Meets OSHA 1910.180 Requirements

Capacity Overload Shut-Off System

50 ft. of 3/16” Aircraft-Quality Wire Rope

Remote Control Pendant: 20 ft. Cord and Quick Disconnect

Load Block with Swivel Hook Safety Latch

Master Disconnect Switch

Battery Cable: 25 ft., 4-Guage

Factory Installed Anti-Two Block

(Meets ANSI B30.5 Safety Standards)

Radio Remote Controls

Mounting Pedestal & Boom Rest

Outrigger Packages

Includes all manuals for every Venturo crane,Venturo crane bodies, Venco hoists and even discontinued products. If you can’t find what you’re looking for, contact us 800-226-2238.

All of our main product family brochures are available for download online. Within each Hydraulic, Electric, Mast, or Hoist family, there are links to download the PDFs of our literature. Also available are spec sheets for every product which includes load charts for the Venturo cranes.

Venco Venturo certified distributors are given a username and password for all product pricing and bid specs. If you have any problems with your username and/or password, contact Ian Lahmer, ilahmer@venturo or 513-772-8448 x131.

If end users or distributors are looking for a quick quote, this form can be filled-out and submitted to Venco Venturo. A Sales Rep will quickly respond to any quotes with information and/or pricing.

All of Venco Venturo’s warranty information is available on the website for Venturo Cranes, Venco Hoists and Venturo Crane Bodies. PDFs are also available for download.

Our website will give you access to most part numbers and options available for every product. Included are the Accessories section for cranes and crane bodies, Crane Training Services (VTS) with information about certification and training programs and also available Mechanic’s Trucks for sale. These are trucks many of our distributors wish to sell with Venturo Cranes and/or Venturo crane bodies.

Connect with us on Facebook, Twitter and LinkedIn for all of our product news and company updates. Also make sure you join our email list for important updates and product announcements.

List unit pricing is located in the distributor section of our website, www.venturo.com. These prices DO NOT include your Distributor Net that has been setup by your Territory Manager. Pricing is only accessed with a username and password. To register, visit the DISTRIBUTOR LOGIN page on the upper-left of the website and follow the instructions. For any questions, contact Ian Lahmer, Marketing (513-772-8448 x131). All “NEW UNIT” orders for service cranes/hoists or crane bodies require a written purchase order which can be faxed or emailed. To send your purchase order via FAX, send to 513-326-5427. To send your purchase order via EMAIL, send to info@venturo.com or sriley@venturo.com

Price Lists All price lists include unit list cost with Standard Features and Options recommended for that particular unit, including outrigger packages, remotes, paint, circuit breakers and more.

Quote Requests To request a quote, contact your Territory Manager. They can help you with unit part numbers and recommended options for each order.

For parts pricing, availability and general questions, contact our parts department at 800-226-2238 or via email at parts@venturo.com or ghargis@venturo.com. To send in a parts order via email, send to parts@venturo.com or ghargis@venturo.com To send in a parts order via FAX, send to 513-326-5427.