architectural finish & fixture specifications v1.3

320
ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3 | NOVEMBER 2016

Upload: others

Post on 23-May-2022

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONSV1.3 | NOVEMBER 2016

Page 2: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 1 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

ACOUSTIC CEILING TILE11/22/16 ACT-01 Acoustic Ceiling Tile @ Game Zone, Lounge, and Breakfast Buffet11/22/16 ACT-02 Acoustic Ceiling Tile @ Lobby Corridor11/22/16 ACT-03-A Acoustic Ceiling Tile @ Guestroom Corridor (OPTION A)11/22/16 ACT-03-B Acoustic Ceiling Tile @ Guestroom Corridor, Fitness

& Employee Breakroom (OPTION B)BASE

11/22/16 B-01-A Vinyl Base @ Guestroom (OPTION A)11/22/16 B-01-B Vinyl Base @ Guestroom (OPTION B)11/22/16 B-02-A Tile Base @ Guest Bath and Public Restrooms (OPTION A) Required Vendor11/22/16 B-02-B Tile Base @ Guest Bath and Public Restrooms (OPTION B) Required Vendor11/22/16 B-03-A Vinyl Base @ Lobby, Corridors, Typical Elevator Lobbies, and Fitness Center

(OPTION A)11/22/16 B-03-B Vinyl Base @ Lobby, Corridors, Typical Elevator Lobbies, and Fitness Center

(OPTION B)11/22/16 B-04-A Tile Base @ Vestibule, 1st Floor Elevator Lobby, Breakroom, and Guest

Laundry (OPTION A)Required Vendor

11/22/16 B-04-B Tile Base @ Vestibule, 1st Floor Elevator Lobby, Breakroom, and Guest Laundry (OPTION B)

Required Vendor

11/22/16 B-04-C Tile Base @ Vestibule, 1st Floor Elevator Lobby, Breakroom, and Guest Laundry (OPTION C)

Required Vendor

11/22/16 B-05-A Vinyl Base @ Back of House & Stairwells (OPTION A)11/22/16 B-05-B Vinyl Base @ Back of House & Stairwells (OPTION B)11/22/16 B-07 Quarry Tile Base @ Food Prep and Food Storage Required Vendor11/22/16 B-08 Tile Cove Base @ Indoor Pool Required Vendor

CARPET11/22/16 C-01-A Carpet Tile @ Lobby (OPTION A) Required Vendor11/22/16 C-01-B Carpet Tile @ Lobby (OPTION B) Required Vendor11/22/16 C-01-C Carpet Tile @ Lobby (OPTION C) Required Vendor11/22/16 C-02-A Accent Carpet Tile @ Corridor (OPTION A) Required Vendor11/22/16 C-02-B Accent Carpet Tile @ Corridor (OPTION B) Required Vendor11/22/16 C-02-C Accent Carpet Tile @ Corridor (OPTION C) Required Vendor11/22/16 C-03-A Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION A) Required Vendor11/22/16 C-03-B Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION B) Required Vendor11/22/16 C-03-C Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION C) Required Vendor11/22/16 C-03-D Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION D) Required Vendor11/22/16 C-03-E Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION E) Required Vendor11/22/16 C-04-A Broadloom Carpet @ Stairwell (OPTION A) Required Vendor11/22/16 C-04-B Broadloom Carpet @ Stairwell (OPTION B) Required Vendor11/22/16 C-04-C Broadloom Carpet @ Stairwell (OPTION C) Required Vendor

CORNER GUARD11/22/16 CD-01 Corner Guards @ Guestroom11/22/16 CD-02 Corner Guards @ Lobby and Pantry

EXTERIOR WALL CLADDING11/22/16 EX-01 EIFS Wall Cladding A11/22/16 EX-02 EIFS Wall Cladding B

Page 3: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 2 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

EXTERIOR WALL CLADDING11/22/16 EX-03 EIFS Wall Cladding C11/22/16 EX-04 EIFS Wall Cladding D11/22/16 EX-05 EIFS Wall Cladding E11/22/16 EX-06 EIFS Wall Cladding F11/22/16 EX-07 Outdoor High Pressure Laminate Panel A11/22/16 EX-08 Outdoor High Pressure Laminate Panel B11/22/16 EX-09 Paint @ Exterior Stair Doors & Door Frames11/22/16 EX-10 EIFS Wall Cladding G

LIGHTING11/22/16 L-01 LED DownLight @ Lounge Area & Game Zone11/22/16 L-02 LED Recessed Downlight @ Breakfast Bar11/22/16 L-03 LED Recessed Downlight @ Entry, Lobby, Breakroom, Restrooms, Hydration

Station & Indoor Pool11/22/16 L-03.1 LED Recessed Downlight @ Fitness Center11/22/16 L-04-A Linear LED Fixture @ Lobby Entry (OPTION A)11/22/16 L-04-B Linear LED Fixture @ Lobby Entry (OPTION B)11/22/16 L-05 LED Surface Mounted Cylinderical Light Fixture @ Work Zone and Dining11/22/16 L-06 DELETED11/22/16 L-07 DELETED11/22/16 L-08 Linear LED Wall Grazer @ Game Zone11/22/16 L-09-A Track Lighting System @ Command Center Soffit (OPTION A)11/22/16 L-09-B Track Lighting @ Command Center (OPTION B)11/22/16 L-10 LED Surface Mounted Downlight @ 2nd Exterior Entry11/22/16 L-11-A LED Lay-In Troffer Fixture @ Back of House (OPTION A)11/22/16 L-11-B LED Lay-In Troffer Fixture @ Back of House (OPTION B)11/22/16 L-12 LED Striplight, Accessories and Power Supply11/22/16 L-13-A LED Surface Mounted General Lighting @ Back of House (OPTION A)11/22/16 L-13-B LED Surface Mounted General Lighting @ Back of House (OPTION B)11/22/16 L-14-A Linear LED Fixture @ Corridor (OPTION A)11/22/16 L-14-B Linear LED Fixture @ Corridor (OPTION B)11/22/16 L-15 LED Recessed Downlight @ Guest Bath Shower11/22/16 L-16 LED Recessed Gimbal @ Guestroom Soffit & Guest Bath11/22/16 L-17 LED Recessed Gimbal @ Guestroom Landing Zone11/22/16 L-18 Cove Lighting @ Indoor Pool11/22/16 L-19 Downlight @ Façade Recesses11/22/16 L-20 In-Ground Uplight @ Façade Recesses11/22/16 L-21 Large Round Exterior Lighting @ Entry Canopy11/22/16 L-22 Small Round Exterior Lighting @ Entry Canopy11/22/16 L-23 Surface Mount Lighting @ Stairwells11/22/16 L-24 Featured Track Lighting @ Lobby Breakfast and Market11/22/16 L-25 LED Beam Light @ Breakfast Buffet

LIGHTING - DECORATIVE11/22/16 BOH-300 Pendant Lighting @ Dining Table Required Vendor11/22/16 GR-300 Reading Lights @ Bedside Required Vendor11/22/16 GR-301 Pendant Light @ Side Chair Required Vendor

Page 4: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 3 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

LIGHTING - DECORATIVE11/22/16 GR-302 Table Lamp @ TV Ledge Required Vendor11/22/16 GR-303 Wall Sconce @ Full-Length Mirror Required Vendor11/22/16 OF-300 String Lights @ Pergola Required Vendor11/22/16 PA-300 Large Decorative Pendant @ Lounge Seating Required Vendor11/22/16 PA-300.1 DELETED Required Vendor11/22/16 PA-301 Small Decorative Pendant @Lounge Seating Required Vendor11/22/16 PA-302 DELETED Required Vendor11/22/16 PA-303 Pendant Light @ Banquette Bench and Work Zone Required Vendor11/22/16 PA-304 Pendant Light @ Paper Airplane Mobile Required Vendor11/22/16 PA-305 Linear Ceiling Mounted Lights @ Corridor Required Vendor11/22/16 PA-306 Ceiling Mounted Lights (Large) @ Elevator Lobby and Command Center Required Vendor11/22/16 PA-307 Ceiling Mounted Lights (Small) @ Elevator Lobby Required Vendor11/22/16 PA-308 Wall Sconce @ Public Restrooms Required Vendor

METAL11/22/16 M-01 Metal Powdercoat Finish @ Millwork & Trellis Jointery11/22/16 M-02 DELETED11/22/16 M-03 DELETED11/22/16 M-04 Metal Finish @ Elevator Doors, Walls, Ceiling, Skirting, and Handrails

MIRRORS11/22/16 MIR-01 Wall Mounted Mirror @ Fitness Center

MIRRORS - ILLUMINATED11/22/16 GR-600 Illuminated Mirror @ Guest Bath Required Vendor11/22/16 GR-602 Illuminated Mirror @ Accessible Guest Bath Required Vendor

PLUMBING FIXTURE11/22/16 PF-01-A Toilet @ Guest Bath & Public Restrooms (OPTION A) Required Vendor11/22/16 PF-01-B DELETED11/22/16 PF-01-C Toilet @ Guest Bath & Public Restrooms (OPTION C) Required Vendor11/22/16 PF-01-D Toilet @ Guest Bath & Public Restrooms (OPTION D) Required Vendor11/22/16 PF-02-A 34" x 48" Shower Pan @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-02-B 34" x 48" Shower Pan @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-02-C 34" x 48" Shower Pan @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-02-D 34" x 48" Shower Pan @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-03-A Sink Basin @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-03-B Sink Basin @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-04-A Sink Faucet @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-04-B Sink Faucet @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-04-C Sink Faucet @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-04-D Sink Faucet @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-05-A Shower Head @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-05-B Shower Head @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-05-C Shower Head @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-05-D Shower Head @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-06-A Shower Controls @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-06-B Shower Controls @ Guest Bath (OPTION B) Required Vendor

Page 5: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 4 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

PLUMBING FIXTURE11/22/16 PF-06-C Shower Controls @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-06-D Shower Controls @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-07-A Sink Basin @ Employee Breakroom (OPTION A) Required Vendor11/22/16 PF-07-B Sink Basin @ Employee Breakroom (OPTION B) Required Vendor11/22/16 PF-08-A Sink Faucet @ Employee Breakroom (OPTION A) Required Vendor11/22/16 PF-08-B Sink Faucet @ Employee Breakroom (OPTION B) Required Vendor11/22/16 PF-08-C Sink Faucet @ Employee Breakroom (OPTION C) Required Vendor11/22/16 PF-09-A Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in

Shower (OPTION A)Required Vendor

11/22/16 PF-09-B Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in Shower (OPTION B)

Required Vendor

11/22/16 PF-09-C Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in Shower (OPTION C)

Required Vendor

11/22/16 PF-09-D Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in Shower (OPTION D)

Required Vendor

11/22/16 PF-10-A Tub @ Accessible Guest Bath (OPTION A) Required Vendor11/22/16 PF-10-B Tub @ Accessible Guest Bath (OPTION B) Required Vendor11/22/16 PF-11-A Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION A) Required Vendor11/22/16 PF-11-B Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION B) Required Vendor11/22/16 PF-11-C Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION C) Required Vendor11/22/16 PF-11-D Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION D) Required Vendor11/22/16 PF-12-A Sink Basin @ Public Restroom (OPTION A) Required Vendor11/22/16 PF-13-A Sink Faucet @ Public Restroom (OPTION A) Required Vendor11/22/16 PF-13-B Sink Faucet @ Public Restroom (OPTION B) Required Vendor11/22/16 PF-13-C Sink Faucet @ Public Restroom (OPTION C) Required Vendor11/22/16 PF-13-D Sink Faucet @ Public Restroom (OPTION D) Required Vendor11/22/16 PF-14-A Toilet @ Public Restrooms (OPTION A) Required Vendor11/22/16 PF-14-B Toilet @ Public Restrooms (OPTION B) Required Vendor11/22/16 PF-14-C Toilet @ Public Restrooms (OPTION C) Required Vendor

PLASTIC LAMINATE11/22/16 PL-01 Plastic Laminate @ Command Center, Lobby Millwork, and Employee

BreakroomRequired Vendor

11/22/16 PL-02 Accent Plastic Laminate @ Market and Public Space Millwork Required Vendor11/22/16 PL-03 Plastic Laminate @ Back Cabinets of Command Center Required Vendor11/22/16 PL-04 Plastic Laminate @ Public Space Millwork & Employee Breakroom Millwork Required Vendor

11/22/16 PL-05 DELETED11/22/16 PL-06 DELETED11/22/16 PL-07 Accent Plastic Laminate C @ Employee Breakroom, Fitness & Pool Millwork Required Vendor

11/22/16 PL-08 Accent Plastic Laminate D @ Employee Breakroom, Fitness & Pool Millwork Required Vendor

11/22/16 PL-09 Accent Plastic Laminate E @ Employee Breakroom, Fitness & Pool Millwork Required Vendor

11/22/16 PL-10 Plastic Laminate @ Guestroom Window Sill Required Vendor11/22/16 PL-11 Plastic Laminate @ Hydration Station Shelving, Market Dividers, and Guest

Laundry Folding TableRequired Vendor

11/22/16 PL-12 Accent Plastic Laminate @ Hydration Station Millwork Required Vendor

Page 6: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 5 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

PLASTIC LAMINATE11/22/16 PL-13 DELETED Required Vendor

PAINT11/22/16 PT-01 Ceiling Paint @ Guestroom11/22/16 PT-02 Ceiling Paint @ Guest Bath11/22/16 PT-03 Paint @ Guestroom Doors, Door Frames, Grilles, Corridor Doors and Door

Frames11/22/16 PT-04 Overall Paint @ Fitness Center, Employee Breakroom, and Back of House

11/22/16 PT-05 Paint @ Window Soffit and Ceiling11/22/16 PT-06 Ceiling Paint @ Lobby and Fitness Center11/22/16 PT-07 Accent Ceiling Paint @ Lobby Corridor11/22/16 PT-08 Paint @ Command Center Soffit11/22/16 PT-09 Accent Ceiling Paint @ Command Center Soffit11/22/16 PT-10 Paint @ Command Center Columns11/22/16 PT-11 Accent Paint A @ Work Zone, Employee Breakroom, and Fitness Center

11/22/16 PT-12 Paint @ Lobby Column, Soffits, and Vestibule11/22/16 PT-13 Paint @ Public Space and B.O.H. Doors, Door Frames, and Grilles

11/22/16 PT-14 Accent Paint B @ Employee Breakroom11/22/16 PT-15 Paint @ Lobby Soffit Grilles11/22/16 PT-16 Paint @ Window Ceiling Grilles11/22/16 PT-17 Ceiling Paint @ Indoor Pool11/22/16 PT-18 Accent Ceiling Paint @ Indoor Pool11/22/16 PT-19 Paint @ Indoor Pool11/22/16 PT-20 Accent Paint @ Indoor Pool11/22/16 PT-21 Accent Paint @ Corridor Doors and Door Frames11/22/16 PT-22 DELETED11/22/16 PT-23 Ceiling Paint A @ Elevator Lobby (Floors 1 & 3)11/22/16 PT-24 Ceiling Paint B @ Elevator Lobby (Floors 2 & 4)11/22/16 PT-25 Ceiling Paint @ Breakfast, Fitness Millwork Area, Typical Guestroom

Corridors, and Back of House11/22/16 PT-26 Ceiling Paint @ Public Restrooms11/22/16 PT-27 Accent Paint @ Indoor Pool11/22/16 PT-28 Accent Paint @ Indoor Pool Focal Wall11/22/16 PT-29-A Ceiling Paint @ Landing Zone (Light Flooring Package)11/22/16 PT-29-B Ceiling Paint @ Landing Zone (Dark Flooring Package)11/22/16 PT-30 Paint @ Media Wall Millwork and Emplyee Breakroom Millwork

RUBBER11/22/16 R-01 Rubber Flooring @ Fitness Center Required Vendor11/22/16 R-02 DELETED

SPECIAL PAINT11/22/16 SF-01 Wrapped Panel Fabric @ Fitness Center

SPECIAL PAINT11/22/16 SPA-01 Knockdown Finish @ Guestroom11/22/16 SPA-02-A Accent Knockdown Finish @ Guestroom Headboard Wall (PACKAGE A)

Page 7: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 6 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

SPECIAL PAINT11/22/16 SPA-02-B Accent Knockdown Finish @ Guestroom Headboard Wall (PACKAGE B)11/22/16 SPA-02-C Accent Knockdown Finish @ Guestroom Headboard Wall (PACKAGE C)

SPECIALTY TILE11/22/16 SPT-01 Static Dissipative Tile @ PBX

SOLID SURFACING11/22/16 SS-01 DELETED

STONE11/22/16 ST-01 Quartz Countertop @ Command Center, Breakfast Buffet, and Employee

BreakroomTILE

11/22/16 T-01-A Floor Tile @ Guest Bath and Public Restrooms (OPTION A) Required Vendor11/22/16 T-01-B Floor Tile @ Guest Bath and Public Restrooms (OPTION B) Required Vendor11/22/16 T-02-A Wall Tile @ Breakfast Buffet (OPTION A) Required Vendor11/22/16 T-02-B Wall Tile @ Breakfast Buffet (OPTION B) Required Vendor11/22/16 T-03 Wall Tile @ Public Restrooms Required Vendor11/22/16 T-04 Floor Tile @ ADA Roll- In Shower Required Vendor11/22/16 T-05-A Floor Tile @ Vestibule, 1st Flr Elev. Lobby, Elev. Cabs, Breakroom, and Guest

Laundry (OPTION A)Required Vendor

11/22/16 T-05-B Floor Tile @ Vestibule, 1st Flr Elev. Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION B)

Required Vendor

11/22/16 T-05-C Floor Tile @ Vestibule, 1st Flr Elev. Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION C)

Required Vendor

11/22/16 T-06 Quarry Tile @ Food Prep & Food Storage Required Vendor11/22/16 T-07 Floor Tile @ Indoor Pool Required Vendor11/22/16 T-08 Accent Floor Tile @ Patio Required Vendor11/22/16 T-09 Mosaic Accent Tile @ Pool Waterline Required Vendor11/22/16 T-10 Floor Tile A @ Outdoor Patio Required Vendor11/22/16 T-11 Floor Tile B @ Outdoor Patio Required Vendor11/22/16 T-13 Depth Marker Tile @ Pool Required Vendor

TOILET ACCESSORY11/22/16 TA-01-A Glass Shower Enclosure @ Guest Shower (OPTION A) Required Vendor11/22/16 TA-01-B Glass Shower Enclosure @ Guest Shower (OPTION B) Required Vendor11/22/16 TA-01-C Glass Shower Enclosure @ Guest Shower (OPTION C) Required Vendor11/22/16 TA-02-A Shower Surround @ Guest Bath (OPTION A) Required Vendor11/22/16 TA-02-B Shower Surround @ Guest Bath (OPTION B) Required Vendor11/22/16 TA-02-C Shower Surround @ Guest Bath (OPTION C) Required Vendor11/22/16 TA-03-A Dual Toilet Paper Holder @ Guest Bath (OPTION A) Required Vendor11/22/16 TA-03-B Dual Toilet Paper Holder @ Guest Bath (OPTION B) Required Vendor11/22/16 TA-04-A Footrest @ Guest Shower (OPTION A) Required Vendor11/22/16 TA-04-B Footrest @ Guest Shower (OPTION B) Required Vendor11/22/16 TA-04-C Footrest @ Guest Shower (OPTION C) Required Vendor11/22/16 TA-05-A DELETED11/22/16 TA-05-B DELETED11/22/16 TA-05-C DELETED11/22/16 TA-06-A Decorative Grab Bar @ Guest Bath Shower (OPTION A)

Page 8: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 7 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

TOILET ACCESSORY11/22/16 TA-06-B Decorative Grab Bar @ Guest Bath Shower (OPTION B)11/22/16 TA-06-C Decorative Grab Bar @ Guest Bath Shower (OPTION C)11/22/16 TA-06-D Decorative Grab Bar @ Guest Bath Shower (OPTION D)11/22/16 TA-07-A Paper Towel Dispenser @ Public Restroom (OPTION A)11/22/16 TA-08-A Toilet Paper Holder @ Public Restroom (OPTION A)11/22/16 TA-09-A Sanitary Dispenser @ Public Restroom (OPTION A)11/22/16 TA-10-A 18" Accessible Grab Bar (OPTION A)11/22/16 TA-10-B 18" Accessible Grab Bar (OPTION B)11/22/16 TA-10-C 18" Accessible Grab Bar (OPTION C)

11/22/16 TA-10-D 18" Accessible Grab Bar (OPTION D)11/22/16 TA-11-A 36" Accessible Grab Bar (OPTION A)11/22/16 TA-11-B 36" Accessible Grab Bar (OPTION B)11/22/16 TA-11-C 36" Accessible Grab Bar (OPTION C)11/22/16 TA-11-D 36" Accessible Grab Bar (OPTION D)11/22/16 TA-12-A 42" Accessible Grab Bar (OPTION A)11/22/16 TA-12-B 42" Accessible Grab Bar (OPTION B)11/22/16 TA-12-C 42" Accessible Grab Bar (OPTION C)11/22/16 TA-12-D 42" Accessible Grab Bar (OPTION D)11/22/16 TA-13-A 24" Accessible Grab Bar @ Guest Shower (OPTION A)11/22/16 TA-13-B 24" Accessible Grab Bar @ Guest Shower (OPTION B)11/22/16 TA-13-C 24" Accessible Grab Bar @ Guest Shower (OPTION C)11/22/16 TA-14-A 30" Accessible Grab Bar @ Guest Shower (OPTION A)11/22/16 TA-14-B 30" Accessible Grab Bar @ Guest Shower (OPTION B)11/22/16 TA-14-C 30" Accessible Grab Bar @ Guest Shower (OPTION C)11/22/16 TA-15-A 36" Accessible Grab Bar @ Guest Shower (OPTION A)11/22/16 TA-15-B 36" Accessible Grab Bar @ Guest Shower (OPTION B)11/22/16 TA-15-C 36" Accessible Grab Bar @ Guest Shower (OPTION C)11/22/16 TA-16-A Tub Surround @ Accessible Tubs (OPTION A) Required Vendor11/22/16 TA-16-B Tub Surround @ Accessible Tubs (OPTION B) Required Vendor11/22/16 TA-17-A Straight Shower Rod @ Accessible Roll-in Showers (OPTION A)11/22/16 TA-17-B Straight Shower Rod @ Accessible Roll-in Showers (OPTION B)11/22/16 TA-17-C Straight Shower Rod @ Accessible Roll-in Showers (OPTION C)11/22/16 TA-18-A Curved Shower Rod @ Accessible Tub (OPTION A)11/22/16 TA-18-B Curved Shower Rod @ Accessible Tub (OPTION B)11/22/16 TA-19-A Folding Shower Seat @ Accessible Roll-in Showers (OPTION A)11/22/16 TA-19-B Folding Shower Seat @ Accessible Roll-in Showers (OPTION B)11/22/16 TA-20-A Removable Seat @ Accessible Tub (OPTION A)11/22/16 TA-21 Baby Changing Station @ Public Restroom

VINYL COMPOSITION TILE11/22/16 VCT-01 Vinyl Composition Tile @ Housekeeping, Laundry, and Linen Storage

VINYL FLOORING11/22/16 VF-01-A Light Luxury Vinyl Tile @ Guestroom (OPTION A) Required Vendor11/22/16 VF-01-B Light Luxury Vinyl Tile @ Guestroom (OPTION B) Required Vendor11/22/16 VF-01-C Light Luxury Vinyl Tile @ Guestroom (OPTION C) Required Vendor

Page 9: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

November 2016 Tru by Hilton Page 8 of 8

Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs

Issue Dt Item Number Item Description Vendor

VINYL FLOORING11/22/16 VF-02-A Dark Luxury Vinyl Tile @ Guestroom (OPTION A) Required Vendor11/22/16 VF-02-B Dark Luxury Vinyl Tile @ Guestroom (OPTION B) Required Vendor11/22/16 VF-02-C Dark Luxury Vinyl Tile @ Guestroom (OPTION C) Required Vendor11/22/16 VF-03-A Light Luxury Vinyl Tile @ Lobby (OPTION A) Required Vendor11/22/16 VF-03-B Light Luxury Vinyl Tile @ Lobby (OPTION B) Required Vendor11/22/16 VF-03-C Light Luxury Vinyl Tile @ Lobby (OPTION C) Required Vendor11/22/16 VF-04-A Medium Luxury Vinyl Tile @ Lobby (OPTION A) Required Vendor11/22/16 VF-04-B Medium Luxury Vinyl Tile @ Lobby (OPTION B) Required Vendor11/22/16 VF-04-C Medium Luxury Vinyl Tile @ Lobby (OPTION C) Required Vendor11/22/16 VF-05-A Dark Luxury Vinyl Tile @ Lobby (OPTION A) Required Vendor11/22/16 VF-05-B Dark Luxury Viny Tile @ Lobby (OPTION B) Required Vendor11/22/16 VF-05-C Dark Luxury Viny Tile @ Lobby (OPTION C) Required Vendor

WOOD11/22/16 WD-01 Wood Finish @ Lobby Trellis Post and Beams

Page 10: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Game Zone,

Lounge, and Breakfast Buffet

Item Number: ACT-01

Item Quantity:

Manufacturer: Hunter Douglas Specialty Product Source: Hunter Douglas Specialty Products

Revision(s):

Contact: Maureen Nelson

Phone: (720) 872-7831Fax:

Address: 11500 E. 53rd Ave. Suite DDenver CO 80239-

Address: 11500 E 53rd Ave. Suite DDenver CO 80239-

Contact: Maureen NelsonE-mail: [email protected]: [email protected]: www.hunterdouglascontract.comWeb: www.hunterdouglascontract.com

Phone: (720) 872-7831Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Techstyle® E Lay-In SystemColor/Finish: Tech "E" WhiteSize/Dimensions: 24" W x 72" L x 1-1/8" Thick

Notes: LX-04 Edgline Perimeter Channel Trim system required for exposed ceiling perimeters.Trim Profile: LX-04 for Lay-In version of Techstyle CeilingsDimensions: 3/4" wide flange x 4.25" highFinish: Natural #7163

Grid at Panel Seams: 9/16" wide tee bar - white finish.

For standard wall perimeter, use Hunter Douglas WT-1 wall channel, Natural #7163.

Ceilings shall be suspened using aircraft cable where suspension is visable.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

ACT-01Page 1

Page 11: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Lobby CorridorItem Number: ACT-02

Item Quantity:

Manufacturer: Hunter Douglas Specialty Product Source: Hunter Douglas Specialty Products

Revision(s):

Contact: Maureen Nelson

Phone: (720) 872-7831Fax:

Address: 11500 E. 53rd Ave. Suite DDenver CO 80239-

Address: 11500 E 53rd Ave. Suite DDenver CO 80239-

Contact: Maureen NelsonE-mail: [email protected]: [email protected]: www.hunterdouglascontract.comWeb: www.hunterdouglascontract.com

Phone: (720) 872-7831Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Techstyle® E Lay-In SystemColor/Finish: Tech "E" WhiteSize/Dimensions: *48" W x 60" L x 1-1/8"Thick

Notes: *LX-04 Edgeline Perimeter Channel Trim system required for exposed perimeters of ceilings.Trim Profile: LX-04 for Lay-In version of Techstyle CeilingsDimensions: 3/4" wide flange x 4.25" highFinish: Natural #7163

For standard wall perimeter extrusion, use Hunter Douglas WT-1 wall channel, Natural #7163.

Size of ceiling tile dependant on location. Verify in field all site dimensions, and field cut as required.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

ACT-02Page 1

Page 12: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Guestroom

Corridor (OPTION A)

Item Number: ACT-03-A

Item Quantity:

Manufacturer: Hunter Douglas Specialty Product Source: Hunter Douglas Specialty Products

Revision(s):

Contact: Maureen Nelson

Phone: (720) 872-7831Fax:

Address: 11500 E. 53rd Ave. Suite DDenver CO 80239-

Address: 11500 E 53rd Ave. Suite DDenver CO 80239-

Contact: Maureen NelsonE-mail: [email protected]: [email protected]: www.hunterdouglascontract.comWeb: www.hunterdouglascontract.com

Phone: (720) 872-7831Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Techstyle® E Lay-In SystemColor/Finish: Tech "E" WhiteSize/Dimensions: 30"W x 60"L x 1-1/8"Thick

Notes: Use standard Hunter Douglas WT-1 extruded aluminum wall perimeter channel, White #1908.

Panels to be installed wall to wall by inserting one side into the wall channel and gently installing the opposite side from below. DO NOT CRUSH THE PANEL.

Cross Tee: To run full width of corridor at panel seams. 9/16" width, white finish.

Refer to architectual drawings for further information.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

ACT-03-APage 1

Page 13: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Guestroom

Corridor, Fitness & Employee Breakroom (OPTION B)

Item Number: ACT-03-B

Item Quantity:

Manufacturer: Armstrong Source: Armstrong Ceilings

Revision(s):

Contact: Monty L. Gilespie, Distribution Sales Manager

Phone: (888) 234-5464 ext. 8110

Fax: (513) 752-4743

Address: 2500 Columbia AvenueLancaster PA 17604- United States

Address:

Contact:E-mail: [email protected]:Web: http://www.armstrong.comWeb: www.armstrong.com

Phone: (717)397-0611

Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultima Square Lay-In/ 1901Color/Finish: White/ DuraBrite Fine TextureSize/Dimensions: 24"W x 24"D x 3/4"Thick

Notes: Use with Prelude 15/16" suspension system, White (WH)

Refer to architectural drawings for location.

System to be installed with full panels centered along corridor width.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

ACT-03-BPage 1

Page 14: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Guestroom (OPTION A)Item Number: B-01-A

Item Quantity:

Manufacturer: Johnsonite Source: Johnsonite

Revision(s):

Contact: Scott Stertmeyer

Phone: (440) 534-8916Fax: (440) 543-8920

Address: 16910 Munn RoadChagrin Falls OH 44023-

Address: 16910 Munn RoadChagrin Falls OH 44023-

Contact: Scott StertmeyerE-mail: [email protected]: [email protected]

800# : (800) 899-8916 800#: (800) 899-8916

Web: www.johnsonite.comWeb: www.johnsonite.com

Phone: (440) 534-8916Fax: (440) 543-8920

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Reveal MillworkColor/Finish: 32 PebbleSize/Dimensions: 4.25" H x 0.25" D

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

B-01-APage 1

Page 15: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Guestroom (OPTION B)Item Number: B-01-B

Item Quantity:

Manufacturer: Shaw Industries Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact: Thomas GigliottiE-mail: [email protected]: [email protected]: www.shawcontractgroup.comWeb: www.shawcontractgroup.com

Phone: (215) 805-0767Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 4.5" Detail Profile Base/ 150VSColor/Finish: Clay/ 00760Size/Dimensions: 4.5"H x 0.25"

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

B-01-BPage 1

Page 16: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Guest Bath and Public

Restrooms (OPTION A)

Item Number: B-02-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Kimona Silk Colorbody Porcelain / S-43C9Color/Finish: Panda Black P327Size/Dimensions: 3"H x 12"W

Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 10 Black

Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-02-APage 1

Page 17: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Guest Bath and Public

Restrooms (OPTION B)

Item Number: B-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.

Revision(s):

Contact: Leslie Weinberg

Phone: (770) 740-0050Fax: (770) 740-1199

Address:

Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-

Contact:E-mail: [email protected]:Web: www.ceramictechnics.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Fusion Porcelain Fabrik Bullnose TrimColor/Finish: Midnight / Honed FinishSize/Dimensions: 3-1/4" x 12" x 11/32" Thick

Notes: Grout Mfg: MapeiGrout Color: 10 BlackGrout Size: 1/8"

Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-02-BPage 1

Page 18: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Lobby, Corridors, Typical

Elevator Lobbies, and Fitness Center (OPTION A)

Item Number: B-03-A

Item Quantity:

Manufacturer: Johnsonite Source: Johnsonite

Revision(s):

Contact: Scott Stertmeyer

Phone: (440) 534-8916Fax: (440) 543-8920

Address: 16910 Munn RoadChagrin Falls OH 44023-

Address: 16910 Munn RoadChagrin Falls OH 44023-

Contact: Scott StertmeyerE-mail: [email protected]: [email protected]

800# : (800) 899-8916 800#: (800) 899-8916

Web: www.johnsonite.comWeb: www.johnsonite.com

Phone: (440) 534-8916Fax: (440) 543-8920

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Reveal MillworkColor/Finish: 63 Burnt UmberSize/Dimensions: 4.25" H x 0.25" D

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-03-APage 1

Page 19: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Lobby, Corridors, Typical

Elevator Lobbies, and Fitness Center (OPTION B)

Item Number: B-03-B

Item Quantity:

Manufacturer: Shaw Industries Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact: Thomas GigliottiE-mail: [email protected]: [email protected]: www.shawcontractgroup.comWeb: www.shawcontractgroup.com

Phone: (215) 805-0767Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 150VS 4.5" Detail ProfileColor/Finish: 00066 CharcoalSize/Dimensions: 4.5" H x 0.25" D

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-03-BPage 1

Page 20: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Vestibule, 1st Floor

Elevator Lobby, Breakroom, and Guest Laundry (OPTION A)

Item Number: B-04-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: ImagicaColor/Finish: Haze IG97/ UnpolishedSize/Dimensions: 3" x12"

Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 02 Pewter

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-04-APage 1

Page 21: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Vestibule, 1st Floor

Elevator Lobby, Breakroom, and Guest Laundry (OPTION B)

Item Number: B-04-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.

Revision(s):

Contact: Leslie Weinberg

Phone: (770) 740-0050Fax: (770) 740-1199

Address:

Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-

Contact:E-mail: [email protected]:Web: www.ceramictechnics.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Fiorano USA TuscanyColor/Finish: BiancoSize/Dimensions: 3" x12"

Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 02 Pewter

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-04-BPage 1

Page 22: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Vestibule, 1st Floor

Elevator Lobby, Breakroom, and Guest Laundry (OPTION C)

Item Number: B-04-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: CT014 Substance BullnoseColor/Finish: 04114 FogSize/Dimensions: 4" x12"

Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 35 Navajo Brown

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-04-CPage 1

Page 23: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Back of House &

Stairwells (OPTION A)

Item Number: B-05-A

Item Quantity:

Manufacturer: Johnsonite Source: Johnsonite

Revision(s):

Contact: Scott Stertmeyer

Phone: (440) 534-8916Fax: (440) 543-8920

Address: 16910 Munn RoadChagrin Falls OH 44023-

Address: 16910 Munn RoadChagrin Falls OH 44023-

Contact: Scott StertmeyerE-mail: [email protected]: [email protected]

800# : (800) 899-8916 800#: (800) 899-8916

Web: www.johnsonite.comWeb: www.johnsonite.com

Phone: (440) 534-8916Fax: (440) 543-8920

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Traditional 4" Vinyl BaseColor/Finish: DC-32-4 PebbleSize/Dimensions: 4"H x 0.45"D

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

B-05-APage 1

Page 24: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Back of House &

Stairwells (OPTION B)

Item Number: B-05-B

Item Quantity:

Manufacturer: Shaw Industries Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact: Thomas GigliottiE-mail: [email protected]: [email protected]: www.shawcontractgroup.comWeb: www.shawcontractgroup.com

Phone: (215) 805-0767Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 4" Cove Base/ 148VSColor/Finish: Clay/ 00760Size/Dimensions: 4"H x 0.125"D

Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

B-05-BPage 1

Page 25: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Quarry Tile Base @ Food Prep and

Food Storage

Item Number: B-07

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Quarry Tile/ Q-3565Color/Finish: Arid Gray 0Q42/ Abrasive GrainSize/Dimensions: 5" x 6"

Notes: Edge: Cove BaseGrout Mfg: MapeiGrout Color: 04 Bahama BeigeGrout Size: 1/8"

Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

B-07Page 1

Page 26: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Cove Base @ Indoor PoolItem Number: B-08

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Exhibition / EX-04 / S-36C9TColor/Finish: Dark Grey / Textured Cove BaseSize/Dimensions: 6"H x 12"W

Notes: Edge: Cove BaseCorner: Cove Base Corner #SC-36C9TGrout: Mapei 1/8" Color: 47 Charcoal

Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

B-08Page 1

Page 27: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION A)Item Number: C-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address:

Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: *590 Trendy TweedWidth or Rug Size: *18" x 36"

Weight: *21.0 ozContent: *Eco Solution NylonType: *Multi-level pattern loop

Primary Backing: *Non- Woven SyntheticSecondary Backing: *Ecoworx® TilePile Height *3/32" low - 6/32" highGauge: *1/12Stitches Per Inch: *10.0

Installation Method: *See Notes

Style Name: *Check In Plank Tile

Dye Method: *100% Solution Dyed

Notes: *Size of carpet tile dependant on approved layout.

Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Carpet Tile May be cut depending on Plan-O-Gram layout.

Flame Requirements: *ASTM-E-648 Class 1

Style Number: *42HVM

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Tru by Hilton

C-01-APage 1

Page 28: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION A)Item Number: C-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-01-APage 2

Page 29: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION B)Item Number: C-01-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: 979 ModifyWidth or Rug Size: 12" x 36"

Weight: 18 oz.Content: Duracolor® Premium NylonType: Tufted, Textured Loop

Primary Backing: EcoFlex NXTPile Height .086" (2.18 mm)Gauge: 1/12Stitches Per Inch: 11.0

Installation Method: See Notes

Style Name: Transformed Façade

Dye Method: Solution Dyed

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM-E-648 Class 1

Style Number: *TRU-C1

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Tru by Hilton

C-01-BPage 1

Page 30: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION B)Item Number: C-01-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-01-BPage 2

Page 31: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION C)Item Number: C-01-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: 01505/ EclipseWidth or Rug Size: 24" x 24"

Weight: 20 oz.Content: Eco solution nylonType: Multi level pattern loop

Primary Backing: SyntheticSecondary Backing: Ecoworx® TilePile Height 0.108" (2.74 mm)Gauge: 1/12Stitches Per Inch: 10

Installation Method: See Notes

Style Name: Visible Tile

Dye Method: 100% solution dyed

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM-E-648 Class 1

Style Number: 5T002

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Tru by Hilton

C-01-CPage 1

Page 32: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION C)Item Number: C-01-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-01-CPage 2

Page 33: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs Item Number: C-02-AItem Description: Accent Carpet Tile @ Corridor (OPTION A)

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address: Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color:Width or Rug Size:

Weight:Content:Type:

Primary Backing:Secondary Backing:Pile HeightGauge:Stitches Per Inch:

Installation Method:

Style Name:

Dye Method:

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements:

Style Number: *800Q9*Room Key*590 Black Jacket*24" x 24"*Multi-level pattern loop*Eco Solution Nylon*19.0 oz*Non- Woven Synthetic*Ecoworx® Tile*3/32" low - 6/32" high*1/12*11.5*100% Solution Dyed*See Notes*ASTM-E-648 Class 1

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Tru by Hilton

C-02-APage 1

Page 34: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs Item Number: C-02-AItem Description: Accent Carpet Tile @ Corridor (OPTION A)

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-02-APage 2

Page 35: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor

(OPTION B)

Item Number: C-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: 949 EvergladeWidth or Rug Size: 12" x36"

Weight: 17 oz. per sq. ydContent: Duracolor® Premium NylonType: Tufted, Textured Loop

Primary Backing: EcoFlex ICTPile Height .092"Gauge: 1/12Stitches Per Inch: 11.0

Installation Method: See Notes

Style Name: Kinesthetic

Dye Method: Solution Dyed / Yarn Dyed

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM E 648 Class 1

Style Number: *TRU-C2

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Tru by Hilton

C-02-BPage 1

Page 36: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor

(OPTION B)

Item Number: C-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-02-BPage 2

Page 37: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor

(OPTION C)

Item Number: C-02-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: 04505/ EclipseWidth or Rug Size: 24" x 24"

Weight: 22 oz.Content: Eco solution nylonType: Multi level pattern loop

Primary Backing: SyntheticSecondary Backing: Ecoworx® TilePile Height 0.109" (2.77 mm)Gauge: 1/12Stitches Per Inch: 9.5

Installation Method: See Notes

Style Name: Applied Tile

Dye Method: 100% solution dyed

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM E 648 Class 1

Style Number: 5T004

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•

Tru by Hilton

C-02-CPage 1

Page 38: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor

(OPTION C)

Item Number: C-02-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:

Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-02-CPage 2

Page 39: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION A)

Item Number: C-03-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address:

Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: *590 Trendy TweedWidth or Rug Size: *24" x 24"

Weight: *21.0 ozContent: *Eco Solution NylonType: *Multi-level pattern loop

Primary Backing: *Non- Woven SyntheticSecondary Backing: *Ecoworx® TilePile Height *3/32" low - 6/32" highGauge: *1/12Stitches Per Inch: *10.0

Installation Method: *See Notes

Style Name: *Check Out Square Tile

Dye Method: *100% Solution Dyed

Notes: *Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: *ASTM-E-648 Class 1

Style Number: *W910H-0

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•

Tru by Hilton

C-03-APage 1

Page 40: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION A)

Item Number: C-03-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:

Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-03-APage 2

Page 41: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION B)

Item Number: C-03-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: 979 ModifyWidth or Rug Size: 12" x 36"

Weight: 18 oz.Content: Duracolor® Premium NylonType: Tufted, Textured Loop

Primary Backing: EcoFlex NXTPile Height .086" (2.18 mm)Gauge: 1/12Stitches Per Inch: 11.0

Installation Method: See Notes

Style Name: Transformed Façade

Dye Method: Solution Dyed

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM-E-648 Class 1

Style Number: *TRU-C1

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Tru by Hilton

C-03-BPage 1

Page 42: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION B)

Item Number: C-03-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-03-BPage 2

Page 43: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION C)

Item Number: C-03-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: 01505/ EclipseWidth or Rug Size: 24" x 24"

Weight: 20 oz.Content: Eco solution nylonType: Multi level pattern loop

Primary Backing: SyntheticSecondary Backing: Ecoworx® TilePile Height 0.108" (2.74 mm)Gauge: 1/12Stitches Per Inch: 10

Installation Method: See Notes

Style Name: Visible Tile

Dye Method: 100% solution dyed

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM E 648 Class 1

Style Number: 5T002

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•

Tru by Hilton

C-03-CPage 1

Page 44: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION C)

Item Number: C-03-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:

Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-03-CPage 2

Page 45: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION D)

Item Number: C-03-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Interface

Revision(s):

Contact: Susan Margraf

Phone: (800) 336-0225Fax:

Address:

Address: 8 Denny PlaceCincinnati OH 45227-

Contact:E-mail: [email protected]:Web: www.interfaceflor.comWeb:

Mobile: (513) 200-4734Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: See NotesWidth or Rug Size: 9.845 in. x 39.38 in.

Weight: 16 oz.Content: 100% Recycled Content Type 6 NylonType: Tufted Textured Loop

Primary Backing: GlasBac®Pile Height 0.16 inGauge: 1/12 inStitches Per Inch: 8 /in

Installation Method: See Notes

Style Name: Harmonize

Dye Method: 100% Solution Dyed

Notes: Integration of both pattern colors, 104043 Gravel and 104042 Iron, in approved corridor flooring design. Refer to Tru seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM E 648 Class 1

Style Number: 138720AK00

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•

Tru by Hilton

C-03-DPage 1

Page 46: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION D)

Item Number: C-03-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: InterfaceInstructions:

Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-03-DPage 2

Page 47: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION E)

Item Number: C-03-E

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Interface

Revision(s):

Contact: Susan Margraf

Phone: (800) 336-0225Fax:

Address:

Address: 8 Denny PlaceCincinnati OH 45227-

Contact:E-mail: [email protected]:Web: www.interfaceflor.comWeb:

Mobile: (513) 200-4734Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: See NotesWidth or Rug Size: 19.69 in. x 39.38 in.

Weight: 18 oz.Content: 100% Recycled Content Type 6 NylonType: Tufted Textured Loop

Primary Backing: GlasBac®Pile Height 0.15 inGauge: 1/12 inStitches Per Inch: 8 /in

Installation Method: See Notes

Style Name: Grasmere

Dye Method: 100% Solution Dyed

Notes: Integration of both pattern colors, 102845 Bedrock 102846 Quarry, in approved corridor flooring design. Refer to Tru seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: ASTM E 648 Class 1

Style Number: 138440AB00

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•

Tru by Hilton

C-03-EPage 1

Page 48: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical

Elevator Lobbies & BOH (OPTION E)

Item Number: C-03-E

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: InterfaceInstructions:

Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-03-EPage 2

Page 49: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell

(OPTION A)

Item Number: C-04-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address: Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: *590 Trendy TweedWidth or Rug Size: *6'-0" Precoat

Weight: *21 oz.Content: *Eco Solution Q® NylonType: *Multi-level Pattern Loop

Primary Backing: *Non-Woven SyntheticSecondary Backing: *EcoWorx® TilePile Height *3/32" low - 6/32" highGauge: *1/12Stitches Per Inch: *10.0

Installation Method: *See Notes

Style Name: *Check In

Dye Method: *100% Solution Dyed

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements: *ASTM-E-648 Class 1

Style Number: *42HVM

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•

Tru by Hilton

C-04-APage 1

Page 50: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell

(OPTION A)

Item Number: C-04-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:

Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-04-APage 2

Page 51: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell

(OPTION B)

Item Number: C-04-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: *Rain ShadowWidth or Rug Size: *12' wide

Repeat: *18"W x 39.27"L

Weight: *32 oz.Content: *Colorstrand SD Nylong

Type: *Tufted - Textured Pattern Cut

Primary Backing: *Woven PolypropylenePile Height *0.152"Gauge: *1/12Stitches Per Inch: *11

Installation Method: *See Notes

Style Name: *Mono Vista

Dye Method: *Solution Dyed

Notes: *Refer to seaming diagram / plan-o-gram provided by manufacturer for installation method.

Style Number: *MH329-859

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Tru by Hilton

C-04-BPage 1

Page 52: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell

(OPTION B)

Item Number: C-04-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-04-BPage 2

Page 53: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell

(OPTION C)

Item Number: C-04-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address: Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color: *97505/ LogwoodWidth or Rug Size: *12' wide

Weight: *32 oz.Content: *Eco Solution NylonType: Multi-level Pattern Loop

Primary Backing: SyntheticSecondary Backing: ClassicbacPile Height *0.224"Gauge: *1/10Stitches Per Inch: *12.0

Installation Method:

Style Name: *Cabuya

Dye Method:

Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.

Flame Requirements:

100% Solution Dyed See NotesASTM E 648 Class 1

Style Number: *5B096

Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.

Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•

Tru by Hilton

C-04-CPage 1

**

***

*

Page 54: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell

(OPTION C)

Item Number: C-04-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:

Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).

Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

C-04-CPage 2

Page 55: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Corner Guards @ GuestroomItem Number: CD-01

Item Quantity:

Manufacturer: InPro Corporation Source: InPro Corporation

Revision(s):

Contact: Leslie Frederick

Phone: (513) 646-2163Fax:

Address: S80 W18766 Apollo DrMuskego WI 53150-

Address: S80 W18766 Apollo DrMuskego WI 53150-

Contact:E-mail: [email protected]:

800# : (800) 222-5556 800#: (800) 222-5556

Web: www.inprocorp.comWeb: www.inprocorp.com

Phone: (292) 679-9010Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Tape-On 90 DegreeColor/Finish: GraystoneSize/Dimensions: 3/4" x 3/4" x full height

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities to be verified by installer.•

Tru by Hilton

CD-01Page 1

Page 56: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Corner Guards @ Lobby and PantryItem Number: CD-02

Item Quantity:

Manufacturer: InPro Corporation Source: InPro Corporation

Revision(s):

Contact: Leslie Frederick

Phone: (513) 646-2163Fax:

Address: S80 W18766 Apollo DrMuskego WI 53150-

Address: S80 W18766 Apollo DrMuskego WI 53150-

Contact:E-mail: [email protected]:

800# : (800) 222-5556 800#: (800) 222-5556

Web: www.inprocorp.comWeb: www.inprocorp.com

Phone: (292) 679-9010Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Surface Mount Stainless Steel Corner GuardSize/Dimensions: 90 degree x 1 1/2" wing x Full height of wall. Type

430 (standard grade) 16 gauge

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities to be verified by installer.•

Tru by Hilton

CD-02Page 1

Page 57: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding AItem Number: EX-01

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc

Revision(s):

Contact: Robert Dazel

Phone: (734) 243-9301Fax:

Address: One Energy WayWest Warwick RI 02893-

Address: One Energy WayWest Warwick RI 02893-

Contact:E-mail: [email protected]:

[email protected]

800# : (800) 556-7752 800#: (800) 556-7752

Web: www.dryvit.comWeb: www.dryvit.com

Mobile: (734) 243-0404Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Dryvit Sandblast DPRColor/Finish: TRUH 02 1030S- with "StratoTone", high

performance colorant , Pantone 7C BlackSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-01Page 1

Page 58: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding BItem Number: EX-02

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc

Revision(s):

Contact: Robert Dazel

Phone: (734) 243-9301Fax:

Address: One Energy WayWest Warwick RI 02893-

Address: One Energy WayWest Warwick RI 02893-

Contact:E-mail: [email protected]:

[email protected]

800# : (800) 556-7752 800#: (800) 556-7752

Web: www.dryvit.comWeb: www.dryvit.com

Mobile: (734) 243-0404Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Dryvit Sandblast HDP- HydrophobicColor/Finish: TRUH 01 2740- Dryvit #613B OvercastSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-02Page 1

Page 59: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding CItem Number: EX-03

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc

Revision(s):

Contact: Robert Dazel

Phone: (734) 243-9301Fax:

Address: One Energy WayWest Warwick RI 02893-

Address: One Energy WayWest Warwick RI 02893-

Contact:E-mail: [email protected]:

[email protected]

800# : (800) 556-7752 800#: (800) 556-7752

Web: www.dryvit.comWeb: www.dryvit.com

Mobile: (734) 243-0404Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Dryvit - TerraNeo Polished GraniteColor/Finish: TRUH 03 1101- Dryvit #207 GlacierSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-03Page 1

Page 60: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding DItem Number: EX-04

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc

Revision(s):

Contact: Robert Dazel

Phone: (734) 243-9301Fax:

Address: One Energy WayWest Warwick RI 02893-

Address: One Energy WayWest Warwick RI 02893-

Contact:E-mail: [email protected]:

[email protected]

800# : (800) 556-7752 800#: (800) 556-7752

Web: www.dryvit.comWeb: www.dryvit.com

Mobile: (734) 243-0404Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Dryvit - "Demandit" Color CoatingColor/Finish: See notes and refer to color diagram 16E/ A5.01Size/Dimensions: Refer to architectural drawings for details and

locations.

Notes: Minimum of 2 Coats over Sandblast HDP- TRUH 01 2740

Color 1: TRUH 04 1085S with "StratoTone" high performance colorant- Pantone PMS Process Yellow, OR Benjamin Moore 2022-30 Bright Yellow

Color 2: TRUH 05 1085S with "StratoTone" high performance colorant- Pantone PMS Process Cyan, OR Benjamin Moore 2059-50 Yosemite Blue

Color 3: TRUH 06 1085S with "StratoTone" high performance colorant- Pantone PMS #317C, OR Benjamin Moore 2048-60 Jamaican Aqua

Color 4: TRUH 07 1085S with "StratoTone" high performance colorant- Pantone PMS #2955C, OR Benjamin Moore 2061-20 Champion Cobalt

Color 5: TRUH 08 1085S with "StratoTone" high performance colorant- Pantone PMS #2685C, OR Benjamin Moore 2071-10 Exotic Purple

Instructions:

Tru by Hilton

EX-04Page 1

Page 61: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding DItem Number: EX-04

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, IncInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-04Page 2

Page 62: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding EItem Number: EX-05

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc

Revision(s):

Contact: Robert Dazel

Phone: (734) 243-9301Fax:

Address: One Energy WayWest Warwick RI 02893-

Address: One Energy WayWest Warwick RI 02893-

Contact:E-mail: [email protected]:

[email protected]

800# : (800) 556-7752 800#: (800) 556-7752

Web: www.dryvit.comWeb: www.dryvit.com

Mobile: (734) 243-0404Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Dryvit Sandblast DPRColor/Finish: TRUH 05 1030S with "StatoTone" high performance

colorant - Pantone PMS Process CyanSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

•Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-05Page 1

Page 63: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding FItem Number: EX-06

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc

Revision(s):

Contact: Robert Dazel

Phone: (734) 243-9301Fax:

Address: One Energy WayWest Warwick RI 02893-

Address: One Energy WayWest Warwick RI 02893-

Contact:E-mail: [email protected]:

[email protected]

800# : (800) 556-7752 800#: (800) 556-7752

Web: www.dryvit.comWeb: www.dryvit.com

Mobile: (734) 243-0404Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Dryvit Sandblast HDP - Hydrophobic TRUH 09 2740Color/Finish: Dryvit #615A TattletaleSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-06Page 1

Page 64: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Outdoor High Pressure Laminate

Panel A

Item Number: EX-07

Item Quantity:

Manufacturer: Trespa Source: Trespa

Revision(s):

Contact: Kevin Bellinger

Phone: (704) 526-7740Fax:

Address: 62 Greene StreetGround FloorNew York NY 10012- United States of America

Address: 62 Greene StreetGround FloorNew York NY 10012-

Contact:E-mail: [email protected]: [email protected]

800# : (800) 487-3772 800#: (800) 487-3772

Web: www.trespa.comWeb: http://www.trespa.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Trespa® Meteon®Color/Finish: Color to match Pantone PMS Process Cyan/ MatteSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-07Page 1

Page 65: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Outdoor High Pressure Laminate

Panel B

Item Number: EX-08

Item Quantity:

Manufacturer: Trespa Source: Trespa

Revision(s):

Contact: Kevin Bellinger

Phone: (704) 526-7740Fax:

Address: 62 Greene StreetGround FloorNew York NY 10012- United States of America

Address: 62 Greene StreetGround FloorNew York NY 10012-

Contact:E-mail: [email protected]: [email protected]

800# : (800) 487-3772 800#: (800) 487-3772

Web: www.trespa.comWeb: http://www.trespa.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Trespa® Meteon®Color/Finish: Color to match Pantone PMS Process Yellow/ MatteSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-08Page 1

Page 66: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Exterior Stair Doors & Door

Frames

Item Number: EX-09

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187

Fax:

Address: Address:

Contact:E-mail: [email protected]:Web: www.benjaminmoore.comWeb:

Craig [email protected] www.benjaminmoore.com

Mobile: (973) 896-6904Mobile: (973) 896-6904

Phone: (201) 949-6187

Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Grand Entrance Waterborne AlkydColor/Finish: *1596 Nightfall / High Gloss 148

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-09Page 1

Page 67: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding GItem Number: EX-10

Item Quantity:

Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc

Revision(s):

Contact: Robert Dazel

Phone: (734) 243-9301Fax:

Address: One Energy WayWest Warwick RI 02893-

Address: One Energy WayWest Warwick RI 02893-

Contact:E-mail: [email protected]:

[email protected]

800# : (800) 556-7752 800#: (800) 556-7752

Web: www.dryvit.comWeb: www.dryvit.com

Mobile: (734) 243-0404Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Dryvit - "Demandit" Color CoatingColor/Finish: *See NotesSize/Dimensions: *Refer to architectural drawings for details and

locations.

Notes: *Color: TRUH 04 1085S with "StratoTone" high performance colorant- Pantone PMS Process Yellow

Minimum of 2 Coats over Sandblast HDP- TRUH 01 2740

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

EX-10Page 1

Page 68: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED DownLight @ Lounge & Game

Zone

Item Number: L-01

Item Quantity:

Manufacturer: Juno Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1300 South Wolf RoadDes Plaines IL 60018-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (800) 367-5866 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.junolightinggroup.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: LC4-S-23-30-U-B-G3/ L400HW-CSColor/Finish: Black FinishSize/Dimensions: 5-3/4"DIA x 10-1/2"H

Notes: Surface mounted nominal 4" aperature downlight

LED lamp included (2300 LM, 3000K Color Temperature)

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-01Page 1

Page 69: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Downlight @ Entry,

Breakfast, Breakroom, Restrooms, Hydration Station, Pool & Corridor

Item Number: L-03

Item Quantity:

Manufacturer: Juno Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1300 South Wolf RoadDes Plaines IL 60018-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (800) 367-5866 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.junolightinggroup.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: L4-23-30-U-G3/ L400-CS-WHColor/Finish: Clear Satin Finish with White FlangeSize/Dimensions: 4-1/4" Dia. x 6"H

Notes: Recessed nominal 4" aperature downlight, white painted flange

LED Iamp included (2300 LM, 3000K Color Temperature)

Please refer to architectural drawings for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-03Page 1

Page 70: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Downlight @ Fitness

Center

Item Number: L-03.1

Item Quantity:

Manufacturer: Juno Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1300 South Wolf RoadDes Plaines IL 60018-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (800) 367-5866 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.junolightinggroup.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: L4-23-30-U-G3 / L400P-CS-WHColor/Finish: Clear Satin Finish with White FlangeSize/Dimensions: 4-1/4" Dia. x 6"H

Notes: Recessed nominal 4" aperature downlight, self flanged, aluminum reflector

LED lamp included (2300 LM, 3000K Color Temperature)

Please refer to architectural drawings for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-03.1Page 1

Page 71: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Linear LED Fixture @ Lobby Entry

(OPTION A)

Item Number: L-04-A

Item Quantity:

Manufacturer: Philips Lighting Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 3000 Minuteman RoadAndover MA 01810- United States of America

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact: Shannon DrakeE-mail: [email protected]:

800# : 1-855-486-2216 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.usa.lighting.philips.com

Phone: (978) 659-3000Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 2911LCGQN-4-7-1-E-CColor/Finish: Custom Dark Gray Finish to match Tiger Drylac RAL

Color: 7011Size/Dimensions: 4'L x 3"W x 5"H

Notes: Surface mounted nominal 3.5" lensed troffer

LED lamp included (2300 LM, 3000K Color Temperature)

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-04-APage 1

Page 72: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Linear LED Fixture @ Lobby Entry

(OPTION B)

Item Number: L-04-B

Item Quantity:

Manufacturer: Axis Lighting Source: Curtis Stout

Revision(s):

Contact: Terry Ryan

Phone: (901) 260-0034Fax: (901) 360-0035

Address: 2505 SenkusMontreal QC H8N 2X8 Canada

Address: 3478 Winhoma DriveMemphis TN 38118-

Contact:E-mail: [email protected]:Web: www.chstout.comWeb: www.axislighting.com

Phone: (514) 948-6272Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: BMSLED-B3-MF-500-80-30-SO-4'-C-UNV-1Color/Finish: Custom Dark *Gray Finish to match Tiger Drlac RAL

Color: 7011Size/Dimensions: 4'L x 3-3/8" W x 4"H

Notes: Surface mounted nominal 3.5" aperature integral LED lensed troffer.

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-04-BPage 1

Page 73: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Surface Mounted Cylinderical

Light Fixture @ Work Area and Dining

Item Number: L-05

Item Quantity:

Manufacturer: Juno Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1300 South Wolf RoadDes Plaines IL 60018-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (800) 367-5866 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.junolightinggroup.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: LC6-S-23-30-U-Custom-G3 / L600HW-CSColor/Finish: Custom Light Blue Housing to match Tiger Drylac RAL

Color: 6027Size/Dimensions: *7-5/8" Dia. x 13-1/4" H

Notes: LED lamp included (2300 LM, 3000K Color Temperature)

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-05Page 1

Page 74: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Linear LED Wall Grazer @ Game Zone

and Lounge

Item Number: L-08

Item Quantity:

Manufacturer: Boca Flasher, Inc. Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 552 NW 77th StreetBoca Raton FL 33487-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.bocaflasher.com

Phone: (561) 989-5338Fax: (561) 982-8323

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Linear wall grazer/ HPNLS-HO-3000K-30X60-120-B-I-S-D-BB-17'

Color/Finish: BlackSize/Dimensions: *See notes

Notes: *LED lamp included (spacing to be 1" on center, 3000K color temperature)

Refer to architectural plans for locations.

Provide all necessary accessories and components needed to complete fixture. Coordinate with architectural drawings for total run length and dimensions. Units come in 6" increments, minimum of 12" and maximum of 96" long, 1.68" D x 1.75" H

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-08Page 1

Page 75: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Track Lighting System @ Command

Center Soffit (OPTION A)

Item Number: L-09-A

Item Quantity:

Manufacturer: Bruck Lighting Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 15774 Gateway CircleTustin CA 92780-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.brucklighting.com

Phone: (714) 259-9959Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Z15 LED Track Spot/ 3350420-XTM19-13LM-30K-80-DA40-MC-ZONMC

Color/Finish: Matte ChromeSize/Dimensions: 3-1/8" Dia. x 5-1/8"H

Notes: *Suspended single circuit monoline track with mounted, adjustable LED accent lights.

LED lamp included (3000K Color Temperature)

Mounting height of track must be coordinated to align the bottom of track head to height of adjacent soffit. Refer to architectural plans for locations, and mounting heights.

Please order the following as required:Zonyx track system: suspended single circuit monoline track. Factory bent to curve.( Part numbers: 350-008-1-MC, 350-061-MC, 350-060-MC)Confirm all mounting and electrical accessories as required by contractor.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•

Tru by Hilton

L-09-APage 1

Page 76: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Track Lighting System @ Command

Center Soffit (OPTION A)

Item Number: L-09-A

Item Quantity:

Manufacturer: Bruck Lighting Source: Regency LightingInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-09-APage 2

Page 77: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Track Lighting @ Command Center

(OPTION B)

Item Number: L-09-B

Item Quantity:

Manufacturer: Zaneen Source: 37 Volts

Revision(s):

Contact: Francis Hollenkamp

Phone: (513) 578-5410Fax:

Address: 30 Tycos DriveToronto ON M6B 1V9 Canada

Address: 1777 Sycamore StreetCincinnati OH 45202-

Contact: E-mail: [email protected]:Web: ww.37volts.comWeb: www.zaneen.com

Mobile: (513) 462-5749Phone: (416) 247-9221Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: L22302-78Color/Finish: Silver/ MatteSize/Dimensions: 2-3/8" Dia. x 7-7/8" H

Notes: Surface mounted, LED downlight cylinder

3000K LED Color Temperature lamp

Aluminum Shade, Transparent Diffuser

Refer to architectural plans for locations and mounting heights.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-09-BPage 1

Page 78: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Lay-In Troffer Fixture @ Back of

House (OPTION A)

Item Number: L-11-A

Item Quantity:

Manufacturer: Oracle Lighting Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1530 Church RoadMontebello CA 90640-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (877) 375-5555 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.oraclelighting.com

Phone:Fax: (877) 375-3333

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 24-OD1V-LED-5000L-DIM10-MVOLT-30K-80Color/Finish: WhiteSize/Dimensions: 47-13/16"L x 22" W x 4" D

Notes: Recessed Nominal 2' x4' downlight with center drop, bi-wings lens style

LED lamp included (5000 LM, 3000K Color Temperature)

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-11-APage 1

Page 79: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Lay-In Troffer Fixture @ Back of

House (OPTION B)

Item Number: L-11-B

Item Quantity:

Manufacturer: Axis Lighting Source: 37 Volts

Revision(s):

Contact: Francis Hollenkamp

Phone: (513) 578-5410Fax:

Address: 2505 SenkusMontreal QC H8N 2X8 Canada

Address: 1777 Sycamore StreetCincinnati OH 45202-

Contact:E-mail: [email protected]:Web: ww.37volts.comWeb: www.axislighting.com

Mobile: (513) 462-5749Phone: (514) 948-6272Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: DIALED-24-B3-5000-80-3-VL-W-UNV-1Color/Finish: WhiteSize/Dimensions: 48"L x 24"W x 4"H

Notes: Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-11-BPage 1

Page 80: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Surface Mounted General Lighting

@ Back of House (OPTION A)

Item Number: L-13-A

Item Quantity:

Manufacturer: Oracle Lighting Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1530 Church RoadMontebello CA 90640-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (877) 375-5555 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.oraclelighting.com

Phone:Fax: (877) 375-3333

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 4-OC1-LED-4000L-DIM10-MVOLT-30K-80Color/Finish: White/ High Gloss Baked EnamelSize/Dimensions: 48"L x 6" W x 5-3/4"H

Notes: Surface mounted LED wraparound troffer

LED lamp included (4000 LM, 3000K Color Temperature)

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-13-APage 1

Page 81: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Surface Mounted General Lighting

@ Back of House (OPTION B)

Item Number: L-13-B

Item Quantity:

Manufacturer: Mercury Lighting Source: Mercury Lighting

Revision(s):

Contact:

Phone: (973) 244-9522Fax:

Address: 20 Audrey PlaceFarfield NJ 07004-

Address: 20 Audrey PlaceFairfield NJ 07004-

Contact:E-mail:E-mail:

800# : (800) 637-2584 800#: (800) 637-2584

Web: www.mercltg.comWeb: www.mercltg.com

Phone:Fax: (973) 244-9522

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: LSE2-4-4500-30K-HTAColor/Finish: WhiteSize/Dimensions: 45"L x 4.976" W x 4.25"H

Notes: Surface mounted integral LED wrap around troffer

LED lamp included (4000 LM, 3000K Color Temperature)

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-13-BPage 1

Page 82: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Downlight @ Guest Bath

Shower

Item Number: L-15

Item Quantity:

Manufacturer: Juno Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1300 South Wolf RoadDes Plaines IL 60018-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (800) 367-5866 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.junolightinggroup.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: MD1LWG2-3K-FL-WHColor/Finish: WhiteSize/Dimensions: 2-1/4" DIA x 2-7/8"H

Notes: Mini LED downlight, Outdoor/Wet Location

LED lamp Included (3000K Color Temperature)

Order TL602E-25-WH electronic driver/transformer separately

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-15Page 1

Page 83: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Gimbal @ Guestroom

Soffit & Guest Bath

Item Number: L-16

Item Quantity:

Manufacturer: Juno Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1300 South Wolf RoadDes Plaines IL 60018-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (800) 367-5866 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.junolightinggroup.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: MG1LG2-3K-FL-WHColor/Finish: WhiteSize/Dimensions: 2-5/8" DIA x 3-1/4"H

Notes: Mini LED Gimbal, Low Voltage

LED lamp Included (3000K Color Temperature)

Order TL602E-25-WH electronic driver/transformer separately

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-16Page 1

Page 84: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Gimbal @ Guestroom

Landing Zone

Item Number: L-17

Item Quantity:

Manufacturer: Juno Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 1300 South Wolf RoadDes Plaines IL 60018-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (800) 367-5866 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.junolightinggroup.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: MG1LG2-3K-FL-BZColor/Finish: BronzeSize/Dimensions: 2-5/8" DIA x 3-1/4"H

Notes: Mini LED Gimbal, Low Voltage

LED lamp Included (3000K Color Temperature)

Order TL602E-25-WH electronic driver/transformer separately

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-17Page 1

Page 85: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Cove Lighting @ Indoor PoolItem Number: L-18

Item Quantity:

Manufacturer: EcoSense Lighting Inc. Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 915 Wilshire Blvd.Suite 2175Los Angelas CA 90017-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800# : (855) 632-6736 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.ecosenselighting.com

Phone: (310) 496-6255Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: TROV L50/ L50-E-XX-10-30-80-MULT-AsymSize/Dimensions: Refer to architectural drawings for locations.

Notes: Provide all necessary accessories and components needed to complete fixture run. Coordinate with architectural drawings.

Certified for Dry/ Damp Locations AND Wet Locations

LED lamp included (3000K Color Temperature)

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-18Page 1

Page 86: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Downlight @ Façade RecessesItem Number: L-19

Item Quantity:

Manufacturer: ERCO Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 160 Raritan Center Pkwy Ste 10Edison NJ 08837 United States of America

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact: Christopher Tedesco, Spec. Sales Rep.E-mail: [email protected]: [email protected]

800#: (800) 284-2024

Web: www.regencylighting.comWeb: http://www.erco.com/

Phone: +1 (732) 225-8856Fax: +1 (732) 225-8857

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Quintessence Recessed Luminaire/ 80218.023Color/Finish: SilverSize/Dimensions: 8-3/4" DIA x 7-1/8" H

Notes: LED 6W, 420 Lumen, 3000K warm white bulb included.

Suitable for wet location.

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-19Page 1

Page 87: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: In-Ground Uplight @ Façade RecessesItem Number: L-20

Item Quantity:

Manufacturer: ERCO Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 160 Raritan Center Pkwy Ste 10Edison NJ 08837 United States of America

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact: Christopher Tedesco, Spec. Sales Rep.E-mail: [email protected]: [email protected]

800#: (800) 284-2024

Web: www.regencylighting.comWeb: http://www.erco.com/

Phone: +1 (732) 225-8856Fax: +1 (732) 225-8857

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Tesis In- Ground Directional Luminaire/ 33629.023Color/Finish: Stainless Steel/ BlackSize/Dimensions: 9.81" DIA x 8.8" D

Notes: LED 4W, 420 Lumen, 3000K warm white bulb included

Refer to architectural plans for locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-20Page 1

Page 88: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Large Round Exterior Lighting @ Entry

Canopy

Item Number: L-21

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address:

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800#: (800) 284-2024

Web: www.regencylighting.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Surface Mount Circular Fixture/ #1105-0013Color/Finish: Aluminum/ Silver FinishSize/Dimensions: 48" Dia. x 4"H with 44" Dia. cutout at center of fixture

Notes: Non- DimmingGE Tetramax 3000K LED bulb with remote power accessSingle Piece White Acrylic Diffuser

FIXTURE MUST BE WET LISTED

FABRICATOR MUST VERIFY JUNCTION BOX LOCATION ON FIXTURE

Refer to architectural plans for mounting locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-21Page 1

Page 89: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Small Round Exterior Lighting @ Entry

Canopy and Secondary Exterior Entry

Item Number: L-22

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address:

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]:

800#: (800) 284-2024

Web: www.regencylighting.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Surface Mount Circular Fixture/ #1105-0011Color/Finish: Aluminum/ Silver FinishSize/Dimensions: 24" Dia. x 4"H with 20" Dia. cutout at center of fixture

Notes: Non- DimmingGE Tetramax 3000K LED bulb with remote power accessSingle Piece White Acrylic Diffuser

FIXTURE MUST BE WET LISTED

FABRICATOR MUST VERIFY JUNCTION BOX LOCATION ON FIXTURE

Refer to architectural plans for mounting locations.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-22Page 1

Page 90: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Surface Mount Lighting @ StairwellsItem Number: L-23

Item Quantity:

Manufacturer: Lithonia Lighting Group Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024

Fax:

Address: PO Box AConyers GA 30012-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact: Linda Owen, Spec. Development ManagerE-mail: [email protected]:

800#: (800) 284-2024

Web: www.regencylighting.comWeb:

Phone: (770) 922-9000 x 2033

Fax: (770) 483-2635

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *WL4 40L EZ1 LP830Color/Finish: *WhiteSize/Dimensions: *48" L x 4-3/4" W x 3-7/8"H

Notes: *Refer to architectural plans for mounting locations.

Please refer to local electrical engineer to determine final quantity and layout based on required lighting outputs and sensors per code jurisdiction.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-23Page 1

Page 91: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Featured Track Lighting @ Lobby

Breakfast and Market

Item Number: L-24

Item Quantity:

Manufacturer: Intense Lighting Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 3340 East La Palma AveAnaheim CA 92806-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact: E-mail: [email protected]: [email protected]

800#: (800) 284-2024

Web: www.regencylighting.comWeb: http://www.intenselighting.com/

Phone: (714) 630-9877Fax: (714) 630-9883

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Track Luminaire/ MXHG2- L2-30-24Color/Finish: *Varies/ See NotesSize/Dimensions: *Overall Dimensions: 6- 15/16" L x 5-1/2"H

Notes: *Refer to architectural drawings for locations.

Fixture to be used in conjunction with the Intense Lighting One Circuit Track Power Sytem.

Please Provide:At Breakfast Island: IS8- 8'-0" Track, Black Finish: (Qty 2) At Command Center Soffit: IS6- 6'-0" Track, Black Finish: (Qty 1) At Lobby Corridor/ Command Center Soffit: IS4 - 4'-0" Track, White Finish: (Qty 1)

Luminaire finish to match Track System.

Optional glare control accessories:S (Integral 1" Snoot)PFLMB-47 (Hex Louver)

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•

Tru by Hilton

L-24Page 1

Page 92: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Featured Track Lighting @ Lobby

Breakfast and Market

Item Number: L-24

Item Quantity:

Manufacturer: Intense Lighting Source: Regency LightingInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-24Page 2

Page 93: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Beam Light @ Breakfast BuffetItem Number: L-25

Item Quantity:

Manufacturer: Gammalux Lighting Systems Source: Regency Lighting

Revision(s):

Contact: Jonathan Wehan

Phone: (800) 284-2024Fax:

Address: 248 E. Arrow Hwy.San Dimas CA 91773-

Address: 9261 Jordan AvenueChatsworth CA 91311-

Contact:E-mail: [email protected]: [email protected]

800# : (800) 356-3275 800#: (800) 284-2024

Web: www.regencylighting.comWeb: www.gammalux.com

Phone:Fax: (909) 599-5288

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *GB22D2-1SL358-120V-DVR-22'N-SF-ASLMDColor/Finish: *BlackSize/Dimensions: *2-1/8" W x 2-1/2"H - Length May Very - See Notes

Notes: *Refer to architectural drawings for mouting heights and location.

Total length to be one 22'-0" continuous, linear run. Light fixture is not to be mounted more than 6" away from wall on each side. Manufacturer to determine housing segments and hardware to connect each fixture run based on final field measurments.

Please use 1000/ft version

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

L-25Page 1

Page 94: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Employee BreakroomItem Description: Pendant Lighting @ Dining TableItem Number: BOH-300

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: No dimming system

Lamp Type: LEDLamp Quantity: 1

Switch Type: Hardwired

Mounting Instructions: Bottom of fixture to be mounted at 54" A.F.F.

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected] Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL listed.

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

BOH-300Page 1

Page 95: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

12Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Employee BreakroomItem Description: Pendant Lighting @ Dining TableItem Number: BOH-300

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

BOH-300Page 2

Page 96: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Reading Lights @ BedsideItem Number: GR-300

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: NO Dimming System

Lamp Type: 2700K LEDLamp Wattage: 1 WattLamp Quantity: 1

Switch Type: One Rocker Switch at Mounting Plate

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

GR-300Page 1

Page 97: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Reading Lights @ BedsideItem Number: GR-300

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

GR-300Page 2

Page 98: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Pendant Light @ Side ChairItem Number: GR-301

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: NO Dimming System

Lamp Type: LED A19 2700KLamp Wattage: 12W / 120 VoltageLamp Quantity: 1

Switch Type: Hardwired

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

GR-301Page 1

Page 99: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Pendant Light @ Side ChairItem Number: GR-301

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

GR-301Page 2

Page 100: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Table Lamp @ TV LedgeItem Number: GR-302

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: NO dimming system

Lamp Type: LED 2700KLamp Wattage: 12w/120VLamp Quantity: 1

Switch Type: On/Off rocker at cordCord Color: Clear

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL listed.

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•

Tru by Hilton

GR-302Page 1

Page 101: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Table Lamp @ TV LedgeItem Number: GR-302

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

GR-302Page 2

Page 102: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Wall Sconce @ Full-Length MirrorItem Number: GR-303

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: NO dimming system

Lamp Type: LED 2700KLamp Wattage: 15WLamp Quantity: Vendor to verify

Switch Type: Hardwired

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

GR-303Page 1

Page 103: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Wall Sconce @ Full-Length MirrorItem Number: GR-303

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

GR-303Page 2

Page 104: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Patio and Pool (OPTIONAL)Item Description: String Lights @ PergolaItem Number: OF-300

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Restoration Hardware- Contract Sales

Revision(s):

Contact: Todd Hilt

Phone: (312) 659-0686Fax:

Address:

Address: 15 Koch RoadSuite JCorte Madera CA 94925-

Contact:E-mail: [email protected]:Web: www.restorationhardware.com/contract-salesWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Lamp Wattage: 100W total (5W max per bulb)Lamp Quantity: 20 per string

Switch Type: Plug-In

Notes: For outdoor applications - product must be connected to a Ground Fault Circuit Interrupting (GFCI) outlet. For seasonal use - not intended for permanent installation or use.

UL Listing: UL listed for outdoor & indoor use.

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Fixture must be U.L. approved. Manufacturer is responsible for submitting all technical specifications for fire safety, UL standards, and any other specifications that are required to comply with local and state fire codes.

Manufacturer to clearly mark each carton with item ID and specification number.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

OF-300Page 1

Page 105: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Large Decorative Pendant @ Lounge Seating

Item Number: PA-300

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Mounting Instructions: Bottom of fixture to be mounted at 89" A.F.F.

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-300Page 1

Page 106: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Small Decorative Pendant @Lounge Seating

Item Number: PA-301

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Mounting Instructions: Bottom of fixture to be mounted at 97" A.F.F.

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-301Page 1

Page 107: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Pendant Light @ Banquette Bench and Work Alcove

Item Number: PA-303

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: No Dimming System

Lamp Type: LEDLamp Wattage: 10-15W 120V A19 2700KLamp Quantity: 1

Switch Type: Hardwired

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected] Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL Listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•

Tru by Hilton

PA-303Page 1

Page 108: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Pendant Light @ Banquette Bench and Work Alcove

Item Number: PA-303

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-303Page 2

Page 109: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: LobbyItem Description: Pendant Light @ Paper Airplane MobileItem Number: PA-304

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: No dimming system

Lamp Type: LEDLamp Wattage: 10-15W 120V A19 2700KLamp Quantity: 5

Switch Type: Hardwired

Notes: Required Vendors:Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL Listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PA-304Page 1

Page 110: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

12Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: LobbyItem Description: Pendant Light @ Paper Airplane MobileItem Number: PA-304

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-304Page 2

Page 111: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Linear Ceiling Mounted Lights @ Corridor

Item Number: PA-305

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: No dimming system

Lamp Type: LEDLamp Wattage: 120V 18watts 2700K

Switch Type: Hardwired

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected] Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PA-305Page 1

Page 112: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Linear Ceiling Mounted Lights @ Corridor

Item Number: PA-305

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-305Page 2

Page 113: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Ceiling Mounted Lights (Large) @ Elevator Lobby and Command Center

Item Number: PA-306

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: No dimming system

Lamp Type: LED 2700K 120VSwitch Type: Hardwired

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected] Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL Listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PA-306Page 1

Page 114: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Ceiling Mounted Lights (Large) @ Elevator Lobby and Command Center

Item Number: PA-306

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-306Page 2

Page 115: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Ceiling Mounted Lights (Small) @ Elevator Lobby

Item Number: PA-307

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: No Dimming System

Lamp Type: LED 2700K 120VSwitch Type: Hardwired

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected] Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL Listed

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PA-307Page 1

Page 116: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Lobby

Item Description: Ceiling Mounted Lights (Small) @ Elevator Lobby

Item Number: PA-307

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-307Page 2

Page 117: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: LobbyItem Description: Wall Sconce @ Public RestroomsItem Number: PA-308

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimmer: No dimming system

Lamp Type: LED, 3000KLamp Wattage: 22 wattLamp Quantity: 1

Switch Type: Hardwired

Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected] Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: [email protected]

Remington, Contact: Dave Mullin, P: 717.730.1002, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

UL Listing: Fixture must be UL Listed.

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PA-308Page 1

Page 118: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: LobbyItem Description: Wall Sconce @ Public RestroomsItem Number: PA-308

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

PA-308Page 2

Page 119: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Metal Powdercoat Finish @ Millwork &

Trellis Jointery

Item Number: M-01

Item Quantity:

Manufacturer: To Bid Source: To Bid

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Powdercoat finish to match Tiger Drylac Statuary Bronze 038/60080

Size/Dimensions: Refer to architectural drawings for details and dimensions.

Instructions:Quanties to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

M-01Page 1

Page 120: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Metal Finish @ Elevator Doors, Walls,

Ceiling, Skirting, and Handrails

Item Number: M-04

Item Quantity:

Manufacturer: To Bid Source: To Bid

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Color/Finish: *Brushed Stainless SteelSize/Dimensions: *Refer to architectural drawings for dimensions and

locations.

Notes: *Coordinate material sizes with elevator cab manufacturer.

Instructions:Quanties to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•

Tru by Hilton

M-04Page 1

Page 121: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Mounted Mirror @ Fitness CenterItem Number: MIR-01

Item Quantity:

Manufacturer: To Bid Source: To Bid

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication:

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Polished Plate Glass MirrorColor/Finish: Polished - must be free of distortionSize/Dimensions: 48" x 96" panel; 4mm-6mm thickness

Notes: Mirrors must be 8mm-6mm thickness with vinyl backing/vinyl back.

Installed mirror panels to butt together flush for seamless look. Installer must provide appropriate mounting hardware for wall condition and weight of mirror.

Aluminum J-Channel trim at exposed top and bottom edges of mirror panels - 1" profile. Refer to architectural drawings for locations and mounting heights.

Instructions:All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Must be of contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

MIR-01Page 1

Page 122: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Illuminated Mirror @ Guest BathItem Number: GR-600

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Description: Custom back-lit illuminated mirror with 2" lit side panels and 1" wide frame. Fixture to be plug-in with flat (right angled) plug.

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Notes: Mirror to be plugged into wall outlet, above vanity. Provide flat (right angled) plug head.

Lamp types to be LED 3000K temperature.

REQUIRED VENDORS:Electric Mirror, Contact: Doug Finefrock, P: 425- 404-3715, email: [email protected]

Majestic Mirror, Contact: Josh Mandel, P: 305-827-2661 x 108, email: [email protected]

Aeris, Contact: Kerry Smith, P: 603-303-7189, email:[email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

Instructions:Must be of contract quality and suitable for commercial use.•Provide all parts, pieces, and instructions for complete installation. Mounting method to be sufficient for weight of piece.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

GR-600Page 1

Page 123: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: GuestroomsItem Description: Illuminated Mirror @ Guest BathItem Number: GR-600

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All interpretations of the specification MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Show all pieces in scaled shop drawings. Entire fixture shall be inspected during the manufacturing and again afterfinal assembly.

Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. Listed and so labeled. Manufacturer is responsible for submitting all technical specifications forfire safety, UL standards, and any other specifications that are required to comply with local and state fire codes.

All pieces must be crated for shipping. All corners should be wrapped with corner guards. Crates should be labeled with instructions for shipment, storage, and opening of crate.

Manufacturer to provide security mounting and hardware.•

Tru by Hilton

GR-600Page 2

Page 124: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Guestrooms

Item Description: Illuminated Mirror @ Accessible Guest Bath

Item Number: GR-602

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Description: Custom back-lit illuminated mirror with 2" lit side panels and 1" wide frame. Fixture to be plug-in with flat (right angled) plug.

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Notes: Mirror to be plugged into wall outlet, above vanity. Provide flat (right angled) plug head.

Lamp types to be LED 3000K temperature.

REQUIRED VENDORS:Electric Mirror, Contact: Doug Finefrock, P: 425- 404-3715, email: [email protected]

Majestic Mirror, Contact: Josh Mandel, P: 305-827-2661 x 108, email: [email protected]

Aeris, Contact: Kerry Smith, P: 603-303-7189, email: [email protected]

Project Light, Contact: Jenni Collier, P: 330.564.9014, email: [email protected]

Instructions:Must be of contract quality and suitable for commercial use.•Provide all parts, pieces, and instructions for complete installation. Mounting method to be sufficient for weight of piece.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Manufacturer to clearly mark each carton with item ID and specification number.•

Tru by Hilton

GR-602Page 1

Page 125: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural Specs

Area Name: Guestrooms

Item Description: Illuminated Mirror @ Accessible Guest Bath

Item Number: GR-602

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:

All quantities to be verified by hotel operator prior to purchasing.•All interpretations of the specification MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Show all pieces in scaled shop drawings. Entire fixture shall be inspected during the manufacturing and again afterfinal assembly.

Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. Listed and so labeled. Manufacturer is responsible for submitting all technical specifications forfire safety, UL standards, and any other specifications that are required to comply with local and state fire codes.

All pieces must be crated for shipping. All corners should be wrapped with corner guards. Crates should be labeled with instructions for shipment, storage, and opening of crate.

Manufacturer to provide security mounting and hardware.•

Tru by Hilton

GR-602Page 2

Page 126: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Guest Bath (OPTION A)Item Number: PF-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.6 gpf full flush and 1.0 partial flushVitreous China

Dimensions: 14-5/16"W x 28-1/8"D x 30-1/2"H

Notes: *Purchase the following separately:

K-4008-0 Brevia Q2 Advantage Toilet Seat(toilet lid is only required at Guestroom locations)Premier: #283038 Heavy Duty Open Front Elongated Plastic Toilet Seat w/ Lid(toilet lid is only required at Guestroom locations)

Color/Finish: White

Model Number: K-4441-0/ K-4353-0Model Name: Persuade Enlongated Bowl and Curve Dual Flush

Toilet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-01-APage 1

Page 127: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Guest Bath (OPTION C)Item Number: PF-01-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Gerber Plumbing Fixtures

Revision(s):

Contact:

Phone: (630) 679-1420Fax:

Address:

Address: 2500 Internationale PkwyWoodridge IL 60517-

Contact:E-mail:E-mail:Web: gerberonline.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Two piece toilet with concealed trapwaySingle flush, 1.28 GPFVitreous china

Dimensions: 28"D x 16-1/8"W x 31-3/8"H

Notes: Please purchase the following separately:

Premier: #283038/793576 Heavy- Duty Plastic Toilet seat, Enlongated, Open front with Lid. Color:White (toilet lid is only required at Guestroom locations)

Color/Finish: White

Model Number: 20-832Model Name: Avalanche Enlongated Ergoheight Toilet

Instructions:Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-01-CPage 1

Page 128: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Guest Bath (OPTION D)Item Number: PF-01-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: American Standard

Revision(s):

Contact: Mark Terrel

Phone: (937) 603-8501Fax: (937) 845-2366

Address:

Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820

Contact:E-mail: [email protected]:

800#: (800) 442-1902

Web: www.americanstandard-us.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: High Efficency, 1.28 GPF; Clean DesignConcealed TrapwayVitreous China

Dimensions: 15-3/4"W x 30-1/4"D x 30-3/4"H

Notes: Toilet seat and lid are included - item #5350.11 Cadet Pro Seat(toilet lid is only required at Guestroom locations).

Color/Finish: White 020

Model Number: 2514.101Model Name: Cadet 3 Elongated 1.28 GPF Toilet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-01-DPage 1

Page 129: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath

(OPTION A)

Item Number: PF-02-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Sterling

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: A Kohler Company444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:

800#: (800) 783-7546

Web: www.sterlingplumbing.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 34"D x 48"W x 4-1/2"HColor/Finish: White

Model Number: 72121100Model Name: Esemble 34" x 48" Center Drain Shower Pan

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-02-APage 1

Page 130: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath

(OPTION B)

Item Number: PF-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Bootz Industries

Revision(s):

Contact:

Phone: (812) 423-5401Fax: (812) 429-2254

Address:

Address: 1400 Park StreetPO Box 18010Evansville IN 47719-

Contact:E-mail:E-mail:Web: www.bootz.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 48"W x 34"D x 7-1/4"HColor/Finish: White

Model Number: 4834PANModel Name: 48 x34 Shower Pan

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-02-BPage 1

Page 131: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath

(OPTION C)

Item Number: PF-02-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.

Revision(s):

Contact: Donna Mincey

Phone: (678) 997-2770Fax: (770) 531-0935

Address:

Address: 4321 Browns Bridge Rd.Gainesville GA 30504-

Contact:E-mail: [email protected]:

800#: (800) 533-1806

Web: www.minceymarble.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Lightly textured, non-slip floor surfaceCenter drain cutout (drain is NOT included)

Dimensions: 34"D x 48"W x 3-1/2"HColor/Finish: 2250 Solid White

Model Number: SP-3448-C/IFModel Name: 34" x 48" Standard Rectangle Shower Pan w/ Center

Drain

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-02-CPage 1

Page 132: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath

(OPTION D)

Item Number: PF-02-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: MPL Corporation

Revision(s):

Contact: Jennifer Heath

Phone: (317) 835-9000Fax: (317) 835-3050

Address:

Address: 203 N. Edgerton StreetFairland IN 46126-

Contact:E-mail: [email protected]:Web: www.mpl-corp.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 47-3/4"W x 34"D x 4"HColor/Finish: Bright White

Model Name: 48" x 34" Center Drain Shower Pan

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-02-DPage 1

Page 133: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Guest Bath (OPTION A)Item Number: PF-03-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Sterling

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: A Kohler Company444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:

800#: (800) 783-7546

Web: www.sterlingplumbing.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 18"W x 12"D x 7-1/8"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: White

Model Number: 442007-U-0Model Name: Sterling Stinson Undermount Sink Basin

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-03-APage 1

Page 134: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Guest Bath (OPTION B)Item Number: PF-03-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: American Standard

Revision(s):

Contact: Mark Terrel

Phone: (937) 603-8501Fax: (937) 845-2366

Address:

Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820

Contact:E-mail: [email protected]:

800#: (800) 442-1902

Web: www.americanstandard-us.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: OVERALL DIMENSIONS: 17-1/8"W x 14-1/8"D x 7-1/2"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: White

Model Number: 0495.221.020Model Name: Ovalyn Undercounter Sink

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-03-BPage 1

Page 135: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION A)Item Number: PF-04-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Single lever handle allows for both on/off activation and temperature setting.1.5 GPM flow rate.Single hole installation

Dimensions: 1-3/4"W x 5-11/16"L x 4-3/4"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: Polished Chrome

Model Number: K-99760-4-CPModel Name: Honesty

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-04-APage 1

Page 136: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION B)Item Number: PF-04-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800#: (800) 444-7649

Web: www.grohe.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.5 GPM max flow rateSingle hole installation

Dimensions: 2-1/8"W x 4"D x 7-5/16"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: Polished Chrome

Model Number: 23129-000Model Name: Eurocube Lavatory Centerset

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-04-BPage 1

Page 137: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION C)Item Number: PF-04-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address:

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact:E-mail:E-mail:

800#: (800) 289-6636

Web: www.moenpro.comWeb:

Mobile: (407) 340-3249Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.2 GPM flow rateSingle hole installation

Dimensions: 4.998"L x 4.893"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: Polished Chrome

Model Number: 6191Model Name: Align Single -Handle Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-04-CPage 1

Page 138: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION D)Item Number: PF-04-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston

Revision(s):

Contact: Stephanie P. Weston

Phone: (302) 765-0227Fax:

Address:

Address: 400 Anchor Mill RoadNew Castle DE 19720-

Contact:E-mail: [email protected]:Web: www.speakmancompany.comWeb:

Mobile: (382) 367-2407Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Lead-free brass construction1.2 GPM flow rateSingle hole installation

Dimensions: 5"L x 6-57/64"H x 1-3/4"W

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: Polished Chrome

Model Number: SB-1003-EModel Name: Neo Single Lever Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-04-DPage 1

Page 139: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION

A)

Item Number: PF-05-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: *4-5/16"W x 2-7/8"H

Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Please purchase the following separately:K-7395-CP- Shower Arm and Flange

Color/Finish: Polished Chrome

Model Number: *K-72419-CPModel Name: *Awaken G110 2.0 gpm Multi-Function Showerhead

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-05-APage 1

Page 140: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION

B)

Item Number: PF-05-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800#: (800) 444-7649

Web: www.grohe.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 2.0 GPM flow rateDimensions: 3-15/16"W x 3-5/16"D

Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Please purchase the following separately:27414-000- Tubular Shower Arm and Flange

Color/Finish: 000 Polished Chrome

Model Number: *26366-000Model Name: New Tempesta Cosmopolitian 100

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-05-BPage 1

Page 141: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION

C)

Item Number: PF-05-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address:

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact:E-mail:E-mail:

800#: (800) 289-6636

Web: www.moenpro.comWeb:

Mobile: (407) 340-3249Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 2.0 GPMDimensions: 4-3/8"W x 2-9/16"D

Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Please purchase the following separately:Shower Arm and Flange (T2192-NH)

Color/Finish: Chrome

Model Number: 3638EPModel Name: 4 Function Shower Head

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-05-CPage 1

Page 142: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION

D)

Item Number: PF-05-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston

Revision(s):

Contact: Stephanie P. Weston

Phone: (302) 765-0227Fax:

Address:

Address: 400 Anchor Mill RoadNew Castle DE 19720-

Contact:E-mail: [email protected]:Web: www.speakmancompany.comWeb:

Mobile: (382) 367-2407Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 3.6" x 4.8" x 3.6"

Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Purchase the Following Separately:S-2540 Neo Arm and Flange

Color/Finish: Polished Chrome

Model Number: S-3010Model Name: Neo 2.5 GPM Multi Function Shower Head

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-05-DPage 1

Page 143: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath

(OPTION A)

Item Number: PF-06-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 6-1/2"W x 4-1/2"D

Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Please purchase the following separately:Model #K-304-KS Rite Temp Pressure Balancing Valve

Color/Finish: CP- Polished Chrome

Model Number: *K-T99761-4-CPModel Name: Honesty Rite Temp Trim and Valve

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-06-APage 1

Page 144: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath

(OPTION B)

Item Number: PF-06-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800#: (800) 444-7649

Web: www.grohe.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 6-11/16"W x 7-1/4"H x 2-15/16"- 3-3/4"D

Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Please purchase the following separately:Model #35026 Universal Rough In Box

Color/Finish: 000- Chrome

Model Number: 19866-000 / 35026-00Model Name: Atrio Single Function Trim

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-06-BPage 1

Page 145: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath

(OPTION C)

Item Number: PF-06-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address:

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact:E-mail:E-mail:

800#: (800) 289-6636

Web: www.moenpro.comWeb:

Mobile: (407) 340-3249Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 7"DIA x 3-21/32"D

Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Color/Finish: Polished Chrome

Model Number: T2191 / 62370Model Name: Align Trim and Valve

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-06-CPage 1

Page 146: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath

(OPTION D)

Item Number: PF-06-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston

Revision(s):

Contact: Stephanie P. Weston

Phone: (302) 765-0227Fax:

Address:

Address: 400 Anchor Mill RoadNew Castle DE 19720-

Contact:E-mail: [email protected]:Web: www.speakmancompany.comWeb:

Mobile: (382) 367-2407Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 7" DIA x 3-1/2"D x 2" DIA(handle)

Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.

Refer to architectural drawings for location and mounting heights.

Color/Finish: Polished Chrome

Model Number: SM-1000-PModel Name: Neo

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-06-DPage 1

Page 147: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Employee Breakroom

(OPTION A)

Item Number: PF-07-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Sterling

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: A Kohler Company444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:

800#: (800) 783-7546

Web: www.sterlingplumbing.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 24-1/2"W x 21-1/2"D x 6-1/2"H (Bowl Depth)Color/Finish: Stainless Steel

Model Number: 11403-4-NAModel Name: Sterling Southhaven Top- Mount Kitchen Sink

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-07-APage 1

Page 148: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Employee Breakroom

(OPTION B)

Item Number: PF-07-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Elkay Manufacturing

Revision(s):

Contact:

Phone: (630) 574-8484Fax:

Address:

Address: 2222 Camden CourtOak Brook IL 60523-

Contact:E-mail: [email protected]:Web: www.elkay.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 25"W x 21-1/4"D x 5-3/8"HColor/Finish: Stainless Steel

Model Number: GE12521Model Name: Dayton Stainless Steel Single Bowl Top-Mount Sink

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-07-BPage 1

Page 149: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Employee Breakroom

(OPTION A)

Item Number: PF-08-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 10" Spout ReachDimensions: 6-3/8"W x 10"D (spout reach) x 9-7/8"H (handle fully

opened)Color/Finish: Polished Chrome

Model Number: K-15171-FL-CPModel Name: Coralais Three Hole Kitchen Sink Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-08-APage 1

Page 150: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Employee Breakroom

(OPTION B)

Item Number: PF-08-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: American Standard

Revision(s):

Contact: Mark Terrel

Phone: (937) 603-8501Fax: (937) 845-2366

Address:

Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820

Contact:E-mail: [email protected]:

800#: (800) 442-1902

Web: www.americanstandard-us.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 10"W x 9-1/4" (spout reach) x 7-1/2"H (handle closed)

Color/Finish: Polished Chrome

Model Number: 4205.000.002Model Name: Reliant Single Control Kitchen Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-08-BPage 1

Page 151: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Employee Breakroom

(OPTION C)

Item Number: PF-08-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Premier Faucet

Revision(s):

Contact: Tom Bierlein

Phone: (904) 248-8347Fax:

Address:

Address:Jacksonville FL 32204-

Contact:E-mail: [email protected]:

800#: (866) 745-4010

Web: www.premierfaucet.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 10-3/8"D (spout reach) x 10-1/8"W x 7-3/8" (handle closed)

Color/Finish: Chrome

Model Number: 106171 / 752274Model Name: Westlake Single Lever Kitchen Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-08-CPage 1

Page 152: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control

Combo @ Accessible Guest Bath Roll-in Shower (OPTION A)

Item Number: PF-09-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Includes:Awaken G110 Multifunction Handshower36" Slidebar60" Metal Hose

Dimensions: 3-5/8" x 4-5/16" x 41-5/8"

Notes: *Please purchase the following separately:

K-75790-ZZ-0 Shower ArmK-72419-CP ShowerheadK-T99762-4 Valve Trim- Polished Chrome with DiverterK-11748-KS Pressure - Balancing Valve with Stops and DiverterK-98351-CP Wall Mount Supply Elbow with Check Valve

Color/Finish: CP Polished Chrome

Model Number: K-99898-CPModel Name: Awaken G110 Slidebar Kit

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•

Tru by Hilton

PF-09-APage 1

Page 153: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control

Combo @ Accessible Guest Bath Roll-in Shower (OPTION B)

Item Number: PF-09-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800#: (800) 444-7649

Web: www.grohe.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 24" x 4" x 2-3/4"

Notes: Please purchase the following separately:

New Tempesta Cosmopolitan 100 Shower Head (26043000)GrohFlex Universal Rough In Box (35026000)Atrio Dual Function PBV Trim- Includes ADA compliant Diverter (19867000)Shower Arm and Flange (27414000)Rainshower 36" Shower Bar (28819001)RotaFlex Metal Shower Hose (28025000)Euphoria 110 Mono Handshower - 1.5 GPM (2726500E)Shut- Off for Handhled (95866000)Hand Shower Wall Mount (28622000)Hand Shower Wall Union (28672000)

Color/Finish: Chrome

Model Number: See NotesModel Name: ADA Shower Combination

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•

Tru by Hilton

PF-09-BPage 1

Page 154: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control

Combo @ Accessible Guest Bath Roll-in Shower (OPTION C)

Item Number: PF-09-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address:

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact:E-mail:E-mail:

800#: (800) 289-6636

Web: www.moenpro.comWeb:

Mobile: (407) 340-3249Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Includes:Handheld shower69" double interlock spiral hose (metal)Double check valves in handshower30" slide bar with push button height selection

Dimensions: 4" x 30-5/8"

Notes: Purchase the following separately:

Drop Ell (A725)Pressure Balancing Valve (62370)Three Function Commercial Transfer Valve Trim Kit with Diverter (3360)Align Three Function Transfer Valve Trim Kit with Diverter (T4192)

Color/Finish: Polished Chrome

Model Number: 3669EPModel Name: 4 Function Massaging Handshower w/ Slide Bar

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•

Tru by Hilton

PF-09-CPage 1

Page 155: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control

Combo @ Accessible Guest Bath Roll-in Shower (OPTION C)

Item Number: PF-09-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.Instructions:

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-09-CPage 2

Page 156: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control

Combo @ Accessible Guest Bath Roll-in Shower (OPTION D)

Item Number: PF-09-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston

Revision(s):

Contact: Stephanie P. Weston

Phone: (302) 765-0227Fax:

Address:

Address: 400 Anchor Mill RoadNew Castle DE 19720-

Contact:E-mail: [email protected]:Web: www.speakmancompany.comWeb:

Mobile: (382) 367-2407Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Includes:Pressure Balance Valve with Diverter and Trim (SM-1400-P)Hand Shower (VS-3010)Slide Bar (VS-153-ADA)Showerarm and Flange (S-2540)Pause/Trickle Adapter (VS-156)

Dimensions: 5.5"W x 5.75"D x 53"HColor/Finish: Polished Chrome

Model Number: SM-1490-ADA-PModel Name: Neo ADA Shower Combination

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-09-DPage 1

Page 157: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub @ Accessible Guest Bath (OPTION

A)

Item Number: PF-10-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Sterling

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: A Kohler Company444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:

800#: (800) 783-7546

Web: www.sterlingplumbing.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 60"W x 29"D x 16-1/4"H

Notes: Manufacturer must provide all parts necessary for installation.

Refer to architectural drawings for locations.

Color/Finish: White

Model Number: 71041110Model Name: Sterling Performa Series

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-10-APage 1

Page 158: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub @ Accessible Guest Bath (OPTION

B)

Item Number: PF-10-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: American Standard

Revision(s):

Contact: Mark Terrel

Phone: (937) 603-8501Fax: (937) 845-2366

Address:

Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820

Contact:E-mail: [email protected]:

800#: (800) 442-1902

Web: www.americanstandard-us.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 60"W x 29"D x 17-1/2"H

Notes: Manufacturer must provide all parts necessary for installation.

Refer to architectural drawings for locations.

Color/Finish: 020 White

Model Number: 2390.202.020Model Name: Princeton Recess Bath

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-10-BPage 1

Page 159: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @

Accessible Guest Bath (OPTION A)

Item Number: PF-11-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Includes:Awaken G110 Multifunction Handshower36" Slidebar60" Metal Hose

Dimensions: 3-5/8" x 4-5/16" x 41-5/8"

Notes: Please purchase the following separately:

K-T99762-4 Valve Trim- Polished Chrome with DiverterK-11748-KS Pressure - Balancing Valve with Stops and DiverterK-98351-CP Wall Mount Supply Elbow with Check ValveK-15135-CP Bath Spout - Polished Chrome

Color/Finish: CP Polished Chrome

Model Number: K-99898-CPModel Name: Awaken G110 Slidebar Kit

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Tru by Hilton

PF-11-APage 1

Page 160: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @

Accessible Guest Bath (OPTION A)

Item Number: PF-11-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler CompanyInstructions:

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-11-APage 2

Page 161: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @

Accessible Guest Bath (OPTION B)

Item Number: PF-11-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800#: (800) 444-7649

Web: www.grohe.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 24" x 4" x 2-3/4"

Notes: Please purchase the following separately:

New Tempesta Cosmopolitan 100 Shower Head (26043000)GrohFlex Universal Rough In Box (35026000)Atrio Dual Function PBV Trim - Includes ADA compliant diverter(19867000)Shower Arm and Flange (27414000)Rainshower 36" Shower Bar (28819001)RotaFlex Metal Shower Hose (28025000)Euphoria 110 Mono Handshower - 1.5 GPM (2726500E)Shut- Off for Handhled (95866000)Hand Shower Wall Mount (28622000)Hand Shower Wall Union (28672000)Twin Elbow (03671000)Concetto Tub Spout - Includes ADA compliant diverter (13275001)

Color/Finish: Chrome

Model Number: See NotesModel Name: ADA Shower and Tub Combination

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

PF-11-BPage 1

Page 162: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @

Accessible Guest Bath (OPTION B)

Item Number: PF-11-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: GroheInstructions:

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-11-BPage 2

Page 163: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @

Accessible Guest Bath (OPTION C)

Item Number: PF-11-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address:

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact:E-mail:E-mail:

800#: (800) 289-6636

Web: www.moenpro.comWeb:

Mobile: (407) 340-3249Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Includes:Handheld shower69" double interlock spiral hose (metal)Double check valves in handshower30" slide bar with push button height selection

Dimensions: 4" x 30-5/8"

Notes: Purchase the following separately:

Drop Ell (A725)Pressure Balancing Valve (62370)Three Function Commercial Transfer Valve Trim Kit with Diverter (3360) Align Three Function Transfer Valve Trim Kit with Diverter (T4192)Level Chrome Tub Spout (3892)

Color/Finish: Polished Chrome

Model Number: 3669EPModel Name: 4 Function Massaging Handshower w/ Slide Bar and

Tub Spout

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•

Tru by Hilton

PF-11-CPage 1

Page 164: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @

Accessible Guest Bath (OPTION C)

Item Number: PF-11-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.Instructions:

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-11-CPage 2

Page 165: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @

Accessible Guest Bath (OPTION D)

Item Number: PF-11-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston

Revision(s):

Contact: Stephanie P. Weston

Phone: (302) 765-0227Fax:

Address:

Address: 400 Anchor Mill RoadNew Castle DE 19720-

Contact:E-mail: [email protected]:Web: www.speakmancompany.comWeb:

Mobile: (382) 367-2407Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Includes:Pressure Balance Valve with Diverter and Trim (SM-1400-P)Hand Shower (VS-3010)Tub Spout (S1557)Slide Bar (VS-153-ADA)Showerarm and Flange (S-2540)Pause/Trickle Adapter (VS-156)

Dimensions: 5.5"W x 5.75"D x 53"HColor/Finish: Polished Chrome

Model Number: SM-1490-ADA-PModel Name: Neo ADA Shower Combination

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-11-DPage 1

Page 166: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Public Restroom

(OPTION A)

Item Number: PF-12-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Sterling

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: A Kohler Company444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:

800#: (800) 783-7546

Web: www.sterlingplumbing.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: 18"W x 12"D x 7-1/8"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: White

Model Number: 442007-U-0Model Name: Sterling Stinson Undermount Sink Basin

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-12-APage 1

Page 167: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Public Restroom

(OPTION B)

Item Number: PF-12-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: American Standard

Revision(s):

Contact: Mark Terrel

Phone: (937) 603-8501Fax: (937) 845-2366

Address:

Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820

Contact:E-mail: [email protected]:

800#: (800) 442-1902

Web: www.americanstandard-us.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Dimensions: OVERALL DIMENSIONS: 17-1/8"W x 14-1/8"D x 7-1/2"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: White

Model Number: 0495.221.020Model Name: Ovalyn Undercounter Sink

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-12-BPage 1

Page 168: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom

(OPTION A)

Item Number: PF-13-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.5 GPM Flow RateSingle Hole Installation

Dimensions: 4-3/8"Spout Reach x 4-1/2"H

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: Polished Chrome

Model Number: K16027-4Model Name: July Single-Handle Sink Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-13-APage 1

Page 169: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom

(OPTION B)

Item Number: PF-13-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800#: (800) 444-7649

Web: www.grohe.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.5 GPM Flow RateSingle Hole Installation

Dimensions: 7-5/16" x 3-15/16"

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: 001 Chrome

Model Number: 34271001Model Name: Concetto Lavatory Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-13-BPage 1

Page 170: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom

(OPTION C)

Item Number: PF-13-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address:

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact:E-mail:E-mail:

800#: (800) 289-6636

Web: www.moenpro.comWeb:

Mobile: (407) 340-3249Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.2 GPM Flow RateSingle Hole Installation

Dimensions: 5-11/16" x 2" x 6-1/8"

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: Chrome

Model Number: 9480Model Name: Ambition Low Profile Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-13-CPage 1

Page 171: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom

(OPTION D)

Item Number: PF-13-D

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston

Revision(s):

Contact: Stephanie P. Weston

Phone: (302) 765-0227Fax:

Address:

Address: 400 Anchor Mill RoadNew Castle DE 19720-

Contact:E-mail: [email protected]:Web: www.speakmancompany.comWeb:

Mobile: (382) 367-2407Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.2 GPM Flow Rate3- Hole Installation

Dimensions: 6.63"D x 7"H x 2.25"W

Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.

Color/Finish: Polished Chrome

Model Number: SB-1021-EModel Name: Neo Widespread Faucet

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-13-DPage 1

Page 172: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Public Restrooms (OPTION A)Item Number: PF-14-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Gerber Plumbing Fixtures

Revision(s):

Contact:

Phone: (630) 679-1420Fax:

Address:

Address: 2500 Internationale PkwyWoodridge IL 60517-

Contact:E-mail:E-mail:Web: gerberonline.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.28 gpf/ 4.8 lpf high efficiency floor mount bowlSiphon JetVitreous china

Dimensions: 27-3/8"L x 14-3/4"W x 17"H

Notes: Please purchase the following separately:

Sloan - #3780018 - 1.28 gpf FlushometerBemis - #1055 000 - Commercial Heavy Duty Elongated toilet SeatPremier - #191200 - Wax Bowl Ring with Sleeve

Color/Finish: White

Model Number: 25-733-0Model Name: North Point ErgoHeight ADA Elongated Spud Bowl

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-14-APage 1

Page 173: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Public Restrooms (OPTION B)Item Number: PF-14-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: 1.8 gpf Vitreous China

Dimensions: 28-1/4"L x 14-7/8"W x 14-1/8"H

Notes: Please purchase the following separately:

Sloan - #3780018 - 1.28 gpf FlushometerKohler - #K-4670-CA-0 - Lustra Commercial Toilet Seat Premier - #191200 Wax Bowl Ring with Sleeve

Color/Finish: White

Model Number: K-4405-0Model Name: Highline Enlongated ADA Toilet Bowl

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-14-BPage 1

Page 174: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Public Restrooms (OPTION C)Item Number: PF-14-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: American Standard

Revision(s):

Contact: Mark Terrel

Phone: (937) 603-8501Fax: (937) 845-2366

Address:

Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820

Contact:E-mail: [email protected]:

800#: (800) 442-1902

Web: www.americanstandard-us.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Description: Operates in the range of 1.1 gpf to 1.6 gpfDirect-fed siphon jet actionVitreous china

Dimensions: 28-1/4"L x 14"W x 16-1/2"H

Notes: Please purchase the following separately:

Sloan - #3780018 - 1.28 gpf FlushometerPremier - #283035 - Heavy Duty Commercial Enlongated Toilet SeatPremier - #191200 Wax Bowl Ring with Sleeve

Color/Finish: White

Model Number: 3043.001.020Model Name: Madera FloWise ADA Elongated Toilet Bowl

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

PF-14-CPage 1

Page 175: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Command Center,

Lobby Millwork, and Employee Breakroom

Item Number: PL-01

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Lamin-art

Revision(s):

Contact: Kristen Davis, Architectural Representative

Phone: Customer Service: (800)

Fax: (800) 860-9199

Address:

Address: 1670 Basswood RoadSchaumburg IL 60173 United States of America

Contact:E-mail: [email protected]:Web: http://www.laminart.com/Web:

Phone:

Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 3077 Mountain BirchColor/Finish: Velva-Tex FinishSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-01Page 1

Page 176: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate @ Market and

Public Space Millwork

Item Number: PL-02

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Formica

Revision(s):

Contact: Jennifer Sullivan

Phone: (614) 264-7768Fax:

Address:

Address: 4612 Pillars DriveCincinnati OH 45209 United States of America

Contact:E-mail: [email protected]:Web: www.formica.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 8824-58Color/Finish: White Drops / Matte FinishSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-02Page 1

Page 177: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Public Space

Millwork & Employee Breakroom Millwork

Item Number: PL-04

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Formica

Revision(s):

Contact: Jennifer Sullivan

Phone: (614) 264-7768Fax:

Address:

Address: 4612 Pillars DriveCincinnati OH 45209 United States of America

Contact:E-mail: [email protected]:Web: www.formica.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Color Core -New White/ 7223C-58Color/Finish: MatteSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-04Page 1

Page 178: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate C @ Employee

Breakroom, Fitness & Pool Millwork

Item Number: PL-07

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Formica

Revision(s):

Contact: Jennifer Sullivan

Phone: (614) 264-7768Fax:

Address:

Address: 4612 Pillars DriveCincinnati OH 45209 United States of America

Contact:E-mail: [email protected]:Web: www.formica.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 2662-58Color/Finish: Clementine/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-07Page 1

Page 179: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate D @ Employee

Breakroom, Fitness & Pool Millwork

Item Number: PL-08

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Formica

Revision(s):

Contact: Jennifer Sullivan

Phone: (614) 264-7768Fax:

Address:

Address: 4612 Pillars DriveCincinnati OH 45209 United States of America

Contact:E-mail: [email protected]:Web: www.formica.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 2013-58Color/Finish: Fiesta/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-08Page 1

Page 180: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate E @ Employee

Breakroom, Fitness & Pool Millwork

Item Number: PL-09

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Formica

Revision(s):

Contact: Jennifer Sullivan

Phone: (614) 264-7768Fax:

Address:

Address: 4612 Pillars DriveCincinnati OH 45209 United States of America

Contact:E-mail: [email protected]:Web: www.formica.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 7882-58Color/Finish: Pale Gold/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-09Page 1

Page 181: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Guestroom

Window Sill

Item Number: PL-10

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Formica

Revision(s):

Contact: Jennifer Sullivan

Phone: (614) 264-7768Fax:

Address:

Address: 4612 Pillars DriveCincinnati OH 45209 United States of America

Contact:E-mail: [email protected]:Web: www.formica.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 902-58Color/Finish: Platinum/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and

dimensions.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-10Page 1

Page 182: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Hydration Station,

Fitness Barre & Guest Laundry Folding Table

Item Number: PL-11

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Wilsonart International

Revision(s):

Contact: Donna Ariapad, Commercial Specification Respresentative

Phone: (513) 874-5900Fax: (513) 874-5974

Address:

Address: 2500 International StreetColumbus OH 43228 United States of America

Contact:

E-mail: [email protected]:

800#: (800) 736-3524

Web: http://www.wilsonart.comWeb:

Mobile: (513) 295-3080Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Landmark Wood/ 7981K-12Color/Finish: Soft grainSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-11Page 1

Page 183: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate @ Hydration

Station Millwork

Item Number: PL-12

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Tamarack

Revision(s):

Contact: Jerry Roeck

Phone: (513) 554-3770Fax: (513) 554-3775

Address:

Address: 39 Techview DrCincinnati OH 45215 United States of America

Contact:E-mail: [email protected]:

800#: (800) 582-4555

Web: www.tamarackdistributorsinc.comWeb:

Mobile: (513) 407-1185Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Primary Yellow/ SY914Color/Finish: SuedeSize/Dimensions: Refer to architectural drawings for details and

locations.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PL-12Page 1

Page 184: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ GuestroomItem Number: PT-01

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N536Color/Finish: Super White PM-1/ Flat

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-01Page 1

Page 185: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Guest BathItem Number: PT-02

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N539Color/Finish: Super White PM-1 / Semi-Gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-02Page 1

Page 186: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Guestroom Doors, Door

Frames, Grilles, Corridor Doors and Door Frames

Item Number: PT-03

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N539Color/Finish: Snow White 2122-70 / Semi-gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-03Page 1

Page 187: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Overall Paint @ Fitness Center,

Employee Breakroom, and Back of House

Item Number: PT-04

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N538Color/Finish: White River 1499 / Eggshell

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-04Page 1

Page 188: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Window Soffit and CeilingItem Number: PT-05

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 522Color/Finish: Deep Silver 2124-30 / Flat

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-05Page 1

Page 189: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Lobby and Fitness

Center

Item Number: PT-06

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 522Color/Finish: Nightfall 1566 / Flat

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-06Page 1

Page 190: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Ceiling Paint @ Lobby CorridorItem Number: PT-07

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N536Color/Finish: Bright Yellow 2022-30 / Flat

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-07Page 1

Page 191: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Command Center SoffitItem Number: PT-08

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N539Color/Finish: Super White PM-1 / Semi-Gloss

Notes: Painted surface MUST cure for a full 7 days prior to applying any graphic vinyl.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-08Page 1

Page 192: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Ceiling Paint @ Command

Center Soffit

Item Number: PT-09

Item Quantity:

Manufacturer: Sherwin Williams Co. Source: Sherwin Williams Co.

Revision(s):

Contact: Stacy Stachler, Account Executive

Phone: (216) 341-6444Fax: (216) 341-1032

Address: 10740-C Broadway AvenueGarfield Heights OH 44125-

Address: 10740-C Broadway AvenueGarfield Heights OH 44125

Contact: Stacy Stachler, Account ExecutiveE-mail: [email protected]: [email protected]: http://www.sherwin.comWeb: www.sherwinwilliams.com

Phone: (216) 341-6444Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Impromptu/ SW6955Color/Finish: Flat

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-09Page 1

Page 193: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Command Center ColumnsItem Number: PT-10

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 526Color/Finish: Deep Silver 2124-30 / Satin

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-10Page 1

Page 194: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint A @ Work Zone,

Employee Breakroom, and Fitness Center

Item Number: PT-11

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N538Color/Finish: Ocean Spray 2047-60 / Eggshell

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-11Page 1

Page 195: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Lobby Column, Soffits, and

Vestibule

Item Number: PT-12

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 526Color/Finish: Nightfall 1596 / Satin

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-12Page 1

Page 196: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Public Space and B.O.H.

Doors, Door Frames, and Grilles

Item Number: PT-13

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N539Color/Finish: Snow White 2122-70 / Semi-gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-13Page 1

Page 197: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint B @ Employee BreakroomItem Number: PT-14

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 524Color/Finish: Hot Spice 2011-30 / Eggshell

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-14Page 1

Page 198: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Lobby Soffit GrillesItem Number: PT-15

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 524Color/Finish: Nightfall 1596 / Semi-Gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-15Page 1

Page 199: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Window Ceiling GrillesItem Number: PT-16

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 524Color/Finish: Deep Silver 2124-30 / Semi-Gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-16Page 1

Page 200: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Indoor PoolItem Number: PT-17

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura Bath & Spa Waterbourne / 528Color/Finish: Super White PM-1 / Semi-Gloss

Notes: Contractor MUST review manufacturer's instructions and application prior to installing.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-17Page 1

Page 201: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Ceiling Paint @ Indoor PoolItem Number: PT-18

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura Bath & Spa Waterbourne / 528Color/Finish: Ocean Spray 2047-60 / Semi-Gloss

Notes: Contractor MUST review manufacturer's instructions and application prior to installing.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-18Page 1

Page 202: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Indoor PoolItem Number: PT-19

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Precatalyzed Epoxy / V342Color/Finish: Harbor Gray AC-25 / Eggshell

Notes: Contractor MUST review manufacturer's instructions and application prior to installing.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-19Page 1

Page 203: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint @ Indoor PoolItem Number: PT-20

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Precatalyzed Epoxy / V342Color/Finish: Nightfall 1596 / Eggshell

Notes: Contractor MUST review manufacturer's instructions and application prior to installing.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-20Page 1

Page 204: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint @ Corridor Doors and

Door Frames

Item Number: PT-21

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N539Color/Finish: Ocean Spray 2047-60 / Semi-Gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-21Page 1

Page 205: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Elevator LobbyItem Number: PT-24

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Aura / 522Color/Finish: Graytint 1611 / Flat

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-24Page 1

Page 206: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Breakfast, Fitness

Millwork Alcove, Typical Guestroom Corridors, and Back of House

Item Number: PT-25

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N536Color/Finish: Super White PM-1 / Flat

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-25Page 1

Page 207: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Public RestroomsItem Number: PT-26

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Ultra Spec / N539Color/Finish: Super White PM-1 / Semi-Gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-26Page 1

Page 208: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Stripe Paint @ Indoor PoolItem Number: PT-27

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Precatalyzed Epoxy / V342Color/Finish: Ocean Spray 2047-60 / Eggshell

Notes: Contractor MUST review manufacturer's instructions and application prior to installing.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-27Page 1

Page 209: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint @ Indoor Pool Focal WallItem Number: PT-28

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Precatalyzed Epoxy / V342Color/Finish: *Bright Yellow 2022-30 / Eggshell

Notes: *Contractor MUST review manufacturer's instructions and application prior to installing.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-28Page 1

Page 210: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Landing Zone (Light

Flooring Package)

Item Number: PT-29-A

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Aura / 522Color/Finish: *Iron Mountain 2134-30 / Flat

Notes: *For LIGHT FLOORING package - to be used in coordination with GR-213 and GR-214 FF&E.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-29-APage 1

Page 211: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Landing Zone (Dark

Flooring Package)

Item Number: PT-29-B

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Ultra Spec / N536Color/Finish: *Indian River 985 / Flat

Notes: *For DARK flooring package - to be used in coordination with GR-213 and GR-214 FF&E.

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-29-BPage 1

Page 212: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Media Wall Millwork and

Employee Breakroom Millwork

Item Number: PT-30

Item Quantity:

Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting

Revision(s):

Contact: Craig Bunting

Phone: (201) 949-6187Fax:

Address:

Address:

Contact: Craig BuntingE-mail: [email protected]: [email protected]

800# : (973) 896-6904

Web: www.benjaminmoore.comWeb: www.benjaminmoore.com

Mobile: (973) 896-6904Phone: (201) 949-6187Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: RL

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Chantilly Lace/ OC-65Color/Finish: *Semi-gloss

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

PT-30Page 1

Page 213: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Rubber Flooring @ Fitness CenterItem Number: R-01

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: ECOsurfaces

Revision(s):

Contact: Brent Beaudoin

Phone: (877) 326-7873Fax: (717) 394-1937

Address:

Address: c/o Gerbert Limited119 South Tree DriveLancaster PA 17603-

Contact:E-mail: [email protected]:Web: www.ecosurfaces.comWeb:

Mobile: (513) 309-5964Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: ECOfitColor/Finish: 1216 Final CutSize/Dimensions: Roll Size: 4' x 25'

Thickness: 8.2mm

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

R-01Page 1

Page 214: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wrapped Panel Fabric @ Fitness

Center

Item Number: SF-01

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Carnegie - Hilton

Revision(s):

Contact: Mary Blanchard

Phone: (602) 515-2736Fax: (516) 307-3843

Address:

Address: 1611 W. Flower Cr. S.Phoenix AZ 85015-

Contact:E-mail: mblanchard@carnegie fabricsE-mail:Web: www.carnegiefabrics.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Acrylic Backed Xorel / Meteor 6427Color/Finish: *728Size/Dimensions: *56"W

Notes: *Flame Retardancy: Meets ASTM E84 Class A / Class 1

Material to be wrapped around plywood substrate and secured in place with glue or staples on the back side.

Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer must provide certificate of flame spread rating, smoke develop rating, and fuel contribution as tested in accordance to ASTM-E84 test.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

SF-01Page 1

Page 215: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Knockdown Finish @ GuestroomItem Number: SPA-01

Item Quantity:

Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.

Revision(s):

Contact: Victor Gomez

Phone: (832) 243-0787Fax:

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Contact: Victor GomezE-mail: [email protected]:Web: www.permatone.comWeb: www.permatone.com

Mobile: (713) 545-8828Phone: (832) 243-0787Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *See NotesColor/Finish: Color to match Benjamin Moore Harbor Gray AC-25

Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

SPA-01Page 1

Page 216: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Knockdown Finish @

Guestroom Headboard Wall (PACKAGE A: Glimmer)

Item Number: SPA-02-A

Item Quantity:

Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.

Revision(s):

Contact: Victor Gomez

Phone: (832) 243-0787Fax:

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Contact: Victor GomezE-mail: [email protected]:Web: www.permatone.comWeb: www.permatone.com

Mobile: (713) 545-8828Phone: (832) 243-0787Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *See NotesColor/Finish: Color to match Benjamin Moore 2121-20 Steel Wool

Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

SPA-02-APage 1

Page 217: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Knockdown Finish @

Guestroom Headboard Wall (PACKAGE B: Spark)

Item Number: SPA-02-B

Item Quantity:

Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.

Revision(s):

Contact: Victor Gomez

Phone: (832) 243-0787Fax:

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Contact: Victor GomezE-mail: [email protected]:Web: www.permatone.comWeb: www.permatone.com

Mobile: (713) 545-8828Phone: (832) 243-0787Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *See NotesColor/Finish: Color to match Benjamin Moore 744 Indigo

Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

SPA-02-BPage 1

Page 218: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Knockdown Finish @

Guestroom Headboard Wall (PACKAGE C: Burst)

Item Number: SPA-02-C

Item Quantity:

Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.

Revision(s):

Contact: Victor Gomez

Phone: (832) 243-0787Fax:

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Address: 11620 Brittmoore Park DriveHouston TX 77041-

Contact: Victor GomezE-mail: [email protected]:Web: www.permatone.comWeb: www.permatone.com

Mobile: (713) 545-8828Phone: (832) 243-0787Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *See NotesColor/Finish: Color to match Benjamin Moore 2019-40 American

Cheese

Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus

Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

Refer to Architectural drawings for details and location.•

Tru by Hilton

SPA-02-CPage 1

Page 219: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Static Dissipative Tile @ PBXItem Number: SPT-01

Item Quantity:

Manufacturer: Armstrong Flooring Source: Armstrong Flooring

Revision(s):

Contact: Scott J. Wert, Territory Sales Manager

Phone: (800) 356-9301Fax:

Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America

Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America

Contact: Scott J. Wert, Territory Sales ManagerE-mail: [email protected]: [email protected]

800# : (513) 571-0817 800#: (513) 571-0817

Web: http://www.armstrong.comWeb: http://www.armstrong.com

Phone: (800) 356-9301Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Static Dissipative ExcelonColor/Finish: 51956/ Fossil GraySize/Dimensions: 12" x 12" x1/8"

Notes: S-392 Static Dissipative Tile Adhesive Required.

Static Load Limit : < .005 in.Resistance ANSI/ESD S7.1 ASTM F-150 Point to point and point to ground: 106 to 109 ohmsResistance in Combination with a Person ANSI/ESD STM 97.1 At 12% R.H. with Dissipative footwear: 106 to 109 ohms

Static Generation ANSI/ESD STM 97.2 At 40% R.H. with Dissipative footwear: < 10 volts. At 12% R.H. with Dissipative footwear: < 10 volts

Static Dissipation ETS Dissipation At 12% R.H. with Dissipative footwear: 1000 to 100 volts: 0.2 seconds avg

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

SPT-01Page 1

Page 220: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Static Dissipative Tile @ PBXItem Number: SPT-01

Item Quantity:

Manufacturer: Armstrong Flooring Source: Armstrong FlooringInstructions:

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

SPT-01Page 2

Page 221: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Quartz @ Command Center, Breakfast,

Employee Breakroom Counters, and Public Space Window Sills

Item Number: ST-01

Item Quantity:

Manufacturer: LG Hausys America, Inc Source: LG Hausys America, Inc

Revision(s):

Contact: Michelle Allen

Phone: (615) 426-5749Fax:

Address: 900 Circle 75 ParkwaySuite 1500Atlanta GA 30339-

Address: 900 Circle 75 ParkwaySuite 1500Atlanta GA 30339-

Contact: Michelle AllenE-mail: [email protected]: [email protected]

800#: (800) 320-3508

Web: www.nustone.comWeb: www.nustone.com

Phone: (513) 214-9939Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Viatera Quartz StoneColor/Finish: Snow StormSize/Dimensions: Refer to architectural drawings for details and

dimensions

Instructions:To include clear matte sealer to protect from staining and water absorption.•Stone installation to meet all requirements per MIA standards.•Must be contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities to be verified by installer.•

Tru by Hilton

ST-01Page 1

Page 222: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Guest Bath and Public

Restrooms (OPTION A)

Item Number: T-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Kimona Silk Colorbody Porcelain / P327Color/Finish: Panda BlackSize/Dimensions: 12" x 24"

Coeff Friction: D.C.O.F. > 0.42 Dry or WetGrout: Mapei; 10 Black, 1/8"

Notes: To be installed in a running bond - overlapping tiles 33%.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-01-APage 1

Page 223: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Guest Bath and Public

Restrooms (OPTION B)

Item Number: T-01-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.

Revision(s):

Contact: Leslie Weinberg

Phone: (770) 740-0050Fax: (770) 740-1199

Address:

Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-

Contact:E-mail: [email protected]:Web: www.ceramictechnics.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Fusion Porcelain FabrikColor/Finish: Midnight / Honed FinishSize/Dimensions: 12" x 24" x 11/32" Thick

Coeff Friction: Wet: 0.68, Dry: 0.71Grout: Mapei; 10 Black, 1/8"

Notes: To be installed in a running bond - overlapping tiles 33%.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-01-BPage 1

Page 224: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION

A)

Item Number: T-02-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.

Revision(s):

Contact: Leslie Weinberg

Phone: (770) 740-0050Fax: (770) 740-1199

Address:

Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-

Contact:E-mail: [email protected]:Web: www.ceramictechnics.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Sassuolo Stone TonesColor/Finish: Azure/ GlossySize/Dimensions: 3" x 12"

Grout: Mapei; 38 Avalanche, 1/8"

Notes: Installation Pattern: 50/50 Brick Running Bond

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-02-APage 1

Page 225: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION

B)

Item Number: T-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Rittenhouse SquareColor/Finish: 0148 Spa/ Semi-GlossSize/Dimensions: 3" x 6"

Coeff Friction: <0.50 Wet <0.80 DryGrout: Mapei; 77 Frost, 1/8"

Notes: Installation Pattern: 50/50 Brick Running Bond

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-02-BPage 1

Page 226: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Public RestroomsItem Number: T-03

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Rittenhouse SquareColor/Finish: 0190 Artic White/ Semi-GlossSize/Dimensions: 3" x 6"

Coeff Friction: <0.50 Wet <0.80 DryGrout: Mapei; 10 Black, 1/8"

Notes: Installation Pattern: 50/50 Brick Running Bond

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-03Page 1

Page 227: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ ADA Roll- In ShowerItem Number: T-04

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Kimona Silk Colorbody Porcelain / P327Color/Finish: Panda BlackSize/Dimensions: 2" x 2"

Coeff Friction: D.C.O.F. > 0.42 Dry or WetGrout: Mapei; 10 Black, 1/8"

Notes: Mesh-mounted on 12 x 12 sheets

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-04Page 1

Page 228: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Vestibule, 1st Flr Elev.

Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION A)

Item Number: T-05-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: ImagicaColor/Finish: Haze IG97/ UnpolishedSize/Dimensions: 12" x 24"

Coeff Friction: D.C.O.F. ≥ 0.42Grout: Mapei; 02 Pewter, 1/8"

Notes: To be installed in a running bond - overlapping tiles 33%.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-05-APage 1

Page 229: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Vestibule, 1st Flr Elev.

Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION B)

Item Number: T-05-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.

Revision(s):

Contact: Leslie Weinberg

Phone: (770) 740-0050Fax: (770) 740-1199

Address:

Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-

Contact:E-mail: [email protected]:Web: www.ceramictechnics.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Fiorano USA TuscanyColor/Finish: BiancoSize/Dimensions: 12" x 24"

Coeff Friction: D.C.O.F. ≥ 0.42Grout: Mapei; 02 Pewter, 1/8"

Notes: To be installed in a running bond - overlapping tiles 33%.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-05-BPage 1

Page 230: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Vestibule, 1st Flr Elev.

Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION C)

Item Number: T-05-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *CT885 SubstanceColor/Finish: 04114 Fog / MatteSize/Dimensions: 12" x 24"

Coeff Friction: D.C.O.F. > 0.42Grout: Mapei; 35 Navajo Brown, 3/16"

Notes: To be installed in a running bond - overlapping tiles 33%.

Instructions:Quantities to be verified by installer•Material must be contract quality and suitable for commercial use•Grout to include clear matte sealer•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-05-CPage 1

Page 231: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Quarry Tile @ Food Prep & Food

Storage

Item Number: T-06

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Quarry Tile/ 0Q42Color/Finish: Arid Gray/ Abrasive GrainSize/Dimensions: 6" x 6"

Coeff Friction: ≥ 0.42Grout: Mapei; 04 Bahama Beige, 1/8"

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-06Page 1

Page 232: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Indoor PoolItem Number: T-07

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Exhibition / EX04Color/Finish: Dark Grey / TexturedSize/Dimensions: 12" x 12"

Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"

Notes: To be installed in a stacked bond pattern.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-07Page 1

Page 233: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Floor Tile @ PatioItem Number: T-08

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Exhibition / EX05Color/Finish: Black / TexturedSize/Dimensions: 12" x 24"

Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"

Notes: Refer to architectural drawings for installation pattern.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-08Page 1

Page 234: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Mosaic Accent Tile @ Pool WaterlineItem Number: T-09

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Retro Rounds / RR07Color/Finish: Daffodil Yellow / MatteSize/Dimensions: 12" x 12" sheet x 3/16" Thick

Coeff Friction: DCOF: <0.42Grout: Mapei; 77 Frost

Notes: *Cut tile to match the height of pool depth marker tile

Refer to architectural drawings for more information.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-09Page 1

Page 235: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile A @ Outdoor PatioItem Number: T-10

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Exhibition / EX02Color/Finish: Grey / TexturedSize/Dimensions: 24" x 48"

Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"

Notes: To be installed in a stacked bond pattern.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-10Page 1

Page 236: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile B @ Outdoor PatioItem Number: T-11

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Exhibition / EX03Color/Finish: Trend Grey / TexturedSize/Dimensions: 24" x 48"

Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"

Notes: To be installed in a stacked bond pattern.

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-11Page 1

Page 237: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Depth Marker Tile @ PoolItem Number: T-13

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile

Revision(s):

Contact: Marsha McCauley, Architectural Representative

Phone: (513) 759-9325Fax: (513) 791-8944

Address:

Address: 4650 Lake Forest DriveSuite 540Cincinnati OH 45242 United States of America

Contact:E-mail: [email protected]:Web: www.daltile.com/Web:

Mobile: (513) 460-1168Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Keystone Mosiac Depth MarkersColor/Finish: *White with Black NumbersSize/Dimensions: *6" x 6" with 4" H numbers and letters

Grout: *Mapei; *77 Frost, *1/8"

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-13Page 1

Page 238: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest

Shower (OPTION A)

Item Number: TA-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Belstone

Revision(s):

Contact: Adam Smith

Phone: (818) 373-4900Fax: (818) 373-4901

Address:

Address: 7658 Haskell AvenueVan Nuys CA 91406-

Contact:E-mail: [email protected]:Web: www.belstoneproducts.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Custom shower enclosure - Refer to architectural drawings

Color/Finish: Stainless Steel HardwareSize/Dimensions: 48"OAW; 28"W x 72"H Pivot Door and 12"W Fixed

Side Panel

Notes: FABRICATOR MUST VERIFY FIELD MEASUREMENTS PRIOR TO FABRICATION.

Pivot door and fixed side panel to be 10mm thick tempered glass. Pivot door to be wall mounted. Handle MUST be included and installed horizontally. Refer to architectural drawings for location of right or left handed door.

Fixed side panel to extend to ceiling.

Provide 18"W horizontal door handle, mounted 36-1/8" above shower pan surface/ stainless steel finish.

Provide all associated hardware required. Any exposed hardware to be stainless steel finish.

Refer to architectural drawings for further details.

Instructions:

Tru by Hilton

TA-01-APage 1

Page 239: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest

Shower (OPTION A)

Item Number: TA-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: BelstoneInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-01-APage 2

Page 240: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest

Shower (OPTION B)

Item Number: TA-01-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.

Revision(s):

Contact: Donna Mincey

Phone: (678) 997-2770Fax: (770) 531-0935

Address:

Address: 4321 Browns Bridge Rd.Gainesville GA 30504-

Contact:E-mail: [email protected]:

800#: (800) 533-1806

Web: www.minceymarble.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Hinged Shower Door w/ Fixed Side Panel / MM-HINGED-PS-10M

Color/Finish: Polished Silver HardwareSize/Dimensions: 48"OAW; 28-3/8"W x 75"H Pivot Door and an approx.

12"W Fixed Side Panel (height - V.I.F.)

Notes: FABRICATOR MUST VERIFY FIELD MEASUREMENTS PRIOR TO FABRICATION.

Pivot door and fixed side panel to be 10mm thick clear tempered glass. Pivot door to be wall mounted.

Handle MUST be included and installed horizontally - measuring 18"W x 2"D x 1"DIA mounted 36-1/8" above shower pan surface/ stainless steel finish. Refer to architectural drawings for location of right or left handed doors.

Fixed side panel to extend to ceiling. Verify ceiling height prior to fabrication.

Provide all associated hardware required. Any exposed hardware to be stainless steel finish.

Refer to architectural drawings for further details.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

TA-01-BPage 1

Page 241: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest

Shower (OPTION B)

Item Number: TA-01-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.Instructions:

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-01-BPage 2

Page 242: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest

Shower (OPTION C)

Item Number: TA-01-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.

Revision(s):

Contact: Donna Mincey

Phone: (678) 997-2770Fax: (770) 531-0935

Address:

Address: 4321 Browns Bridge Rd.Gainesville GA 30504-

Contact:E-mail: [email protected]:

800#: (800) 533-1806

Web: www.minceymarble.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Hinged Shower Door w/ Header / MM-Hinged-PS-10MColor/Finish: Polished FinishSize/Dimensions: Overall Door: 28-3/8"W x 75"H, with (1) Fixed Panel

w/ header x 78"H

Notes: FABRICATOR MUST VERIFY FIELD MEASUREMENTS PRIOR TO FABRICATION.

Pivot door and fixed side panel to be 10mm thick tempered glass. Pivot door to be wall mounted.

Handle MUST be included and installed horizontally - measuring 18"W x 2"D x 1"DIA mounted 36-1/8" above shower pan surface/ stainless steel finish. Refer to architectural drawings for location of right or left handed doors.

Fixed panel to be mounted in enclosed frame with header. OAH is 78" Verify all dimensions in field prior to production.

Provide all associated hardware required. Any exposed hardware to be stainless steel finish.

Refer to architectural drawings for further details.

Instructions:

Tru by Hilton

TA-01-CPage 1

Page 243: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest

Shower (OPTION C)

Item Number: TA-01-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.Instructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-01-CPage 2

Page 244: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath

(OPTION A)

Item Number: TA-02-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Choreograph / Brick TextureColor/Finish: T01-0 White / Matte finishSize/Dimensions: See Notes

Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.

CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.

Provide the following:(2) 36"W x 96"H Brick Texture Wall Panels(1) 48"W x 96"H Brick Texture Wall Panel (at standard shower enclosures)(1) 60"W x 96"H Brick Texture Wall Panel (at accessible shower enclosures)(2) 96"H corner joints #K-97635-0 / color WHITE

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

Tru by Hilton

TA-02-APage 1

Page 245: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath

(OPTION A)

Item Number: TA-02-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler CompanyInstructions:

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-02-APage 2

Page 246: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath

(OPTION B)

Item Number: TA-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.

Revision(s):

Contact: Donna Mincey

Phone: (678) 997-2770Fax: (770) 531-0935

Address:

Address: 4321 Browns Bridge Rd.Gainesville GA 30504-

Contact:E-mail: [email protected]:

800#: (800) 533-1806

Web: www.minceymarble.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 3" x 6" Subway Vintage Panel System / TS-VN/3x6Color/Finish: 2250 Solid White / Gloss FinishSize/Dimensions: See Notes

Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.

CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.

Provide the following:(2) 38"W x 97"H 3x6 Subway Panels(1) 50"W x 97"H 3x6 Subway Panel (at standard shower enclosures)(1) 66"W x 97"H 3x6 Subway Panel (at accessible shower enclosures)

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

Tru by Hilton

TA-02-BPage 1

Page 247: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath

(OPTION B)

Item Number: TA-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.Instructions:

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-02-BPage 2

Page 248: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath

(OPTION C)

Item Number: TA-02-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: MPL Corporation

Revision(s):

Contact: Jennifer Heath

Phone: (317) 835-9000Fax: (317) 835-3050

Address:

Address: 203 N. Edgerton StreetFairland IN 46126-

Contact:E-mail: [email protected]:Web: www.mpl-corp.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 6" x 24" Smooth TileColor/Finish: Bright White/ GlossySize/Dimensions: See Notes

Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.

CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.

Provide the following:(2) 34"W x 96"H Wall Panels(1) 48"W x 96"H Wall Panel (at standard shower enclosures)(1) 60"W x 96"H Wall Panel (at accessible shower enclosures)

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the completeinstallation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.

Tru by Hilton

TA-02-CPage 1

Page 249: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath

(OPTION C)

Item Number: TA-02-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: MPL CorporationInstructions:

Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-02-CPage 2

Page 250: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dual Toilet Paper Holder @ Guest Bath

(OPTION A)

Item Number: TA-03-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address:

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact:E-mail: [email protected]:Web: http://www.bobrick.com/Bobrick/Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Recessed Toilet Tissue Dispenser / B-6977Color/Finish: Satin Stainless SteelSize/Dimensions: 12-5/16"W x 6-1/8"H

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-03-APage 1

Page 251: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dual Toilet Paper Holder @ Guest Bath

(OPTION B)

Item Number: TA-03-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Gatco, Inc.

Revision(s):

Contact: Michael I. Goffstein

Phone: (800) 227-5640Fax: (510) 895-5676

Address:

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Contact:E-mail: [email protected]:Web: www.gatcoinc.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Recessed Toilet Tissue Dispenser / 782AColor/Finish: ChromeSize/Dimensions: 12-1/4"W x 6-1/2"H

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-03-BPage 1

Page 252: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Footrest @ Guest Shower (OPTION A)Item Number: TA-04-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address:

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact:E-mail: [email protected]:

800#: (877) 894-6448

Web: www.wingits.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Tubular Corner Foot Rest / #WFRTCColor/Finish: Stainless SteelSize/Dimensions: 8"W x 1.25"DIA x 8" Projection

Notes: Includes anti-slip grip.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-04-APage 1

Page 253: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Footrest @ Guest Shower (OPTION B)Item Number: TA-04-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.

Revision(s):

Contact: Donna Mincey

Phone: (678) 997-2770Fax: (770) 531-0935

Address:

Address: 4321 Browns Bridge Rd.Gainesville GA 30504-

Contact:E-mail: [email protected]:

800#: (800) 533-1806

Web: www.minceymarble.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 15" Foot Rest / FR-05Color/Finish: White / Textured and Gloss FinishSize/Dimensions: 15"W x 4-3/4"D (Tapers to 1/2") x 1-1/2"H

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-04-BPage 1

Page 254: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Footrest @ Guest Shower (OPTION C)Item Number: TA-04-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: MPL Corporation

Revision(s):

Contact: Jennifer Heath

Phone: (317) 835-9000Fax: (317) 835-3050

Address:

Address: 203 N. Edgerton StreetFairland IN 46126-

Contact:E-mail: [email protected]:Web: www.mpl-corp.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Accessory Shelf/ EXG-175.2Color/Finish: Bight White/ GlossySize/Dimensions: 15"L x 3"D (Tapers to1-3/8"D) x 1-1/2"H

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-04-CPage 1

Page 255: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath

Shower (OPTION A)

Item Number: TA-06-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: WGB5MEPS24/ Modern Elegance Grab BarColor/Finish: Stainless Steel/ Polished FinishSize/Dimensions: 24"W x 2"H x 2.75"D

Notes: Refer to architectural drawings for location and mounting height.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-06-APage 1

Page 256: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath

Shower (OPTION B)

Item Number: TA-06-B

Item Quantity:

Manufacturer: Grohe Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800# : (800) 444-7649 800#: (800) 444-7649

Web: www.grohe.comWeb: www.grohe.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 40794001/ Essentials Grab BarColor/Finish: 001 ChromeSize/Dimensions: 24"W x 3.66"D

Notes: Refer to architectural drawings for location and mounting height.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-06-BPage 1

Page 257: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath

Shower (OPTION C)

Item Number: TA-06-C

Item Quantity:

Manufacturer: Gatco, Inc. Source: Gatco, Inc.

Revision(s):

Contact: Michael I. Goffstein

Phone: (800) 227-5640Fax: (510) 895-5676

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Contact: Michael I. GoffsteinE-mail: [email protected]: [email protected]

800# : (800) 227-5640

Web: www.gatcoinc.comWeb: www.gatcoinc.com

Phone:Fax: (510) 895-5676

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 854/ 24" Latitude Grab barColor/Finish: ChromeSize/Dimensions: 24"W x 3"H x 2.8"D

Notes: Refer to architectural drawings for location and mounting height.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-06-CPage 1

Page 258: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath

Shower (OPTION D)

Item Number: TA-06-D

Item Quantity:

Manufacturer: Kohler Company Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:

Fax:

Address: 444 Highland DriveKohler WI 53044 United States of America

Address: 444 Highland DriveKohler WI 53044-

Contact: Doug JohnstonE-mail: [email protected]: [email protected]

800# : (805) 402-1335

Web: ww.kohler.comWeb: http://www.kohler.com

Mobile: (972) 342-8026

Phone: (800) 421-9559 voice mail

Fax: (805) 496-0129

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Purist 24" Grab Bar / K-11893-SColor/Finish: Polished StainlessSize/Dimensions: 24"W x 2-3/4"D x 2-7/16"H

Notes: Refer to architectural drawings for location and mounting height.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-06-DPage 1

Page 259: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paper Towel Dispenser @ Public

Restroom (OPTION A)

Item Number: TA-07-A

Item Quantity:

Manufacturer: Georgia-Pacific Professional Source: Georgia-Pacific Professional

Revision(s):

Contact: Perry Harding

Phone: (609) 607-9790Fax:

Address: 133 Peachtree St. NEAtlanta GA 30303-

Address: 133 Peachtree St. NEAtlanta GA 30303-

Contact: Perry HardingE-mail: [email protected]: [email protected]

800# : (866) 435-5647 800#: (866) 435-5647

Web: http://www.gppro.comWeb: http://www.gppro.com

Phone: (609) 907-9790Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: enMotion Recessed Automated Touchless Towel Dispenser/ 59466

Color/Finish: Stainless SteelSize/Dimensions: 13"W x 8"D x 16.4"H

Notes: Refer to architectural drawings for location and mounting height.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-07-APage 1

Page 260: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet Paper Holder @ Public Restroom

(OPTION A)

Item Number: TA-08-A

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Recessed Multi-Roll Toilet Tissue Dispenser / B-4388Color/Finish: Satin StainlessSize/Dimensions: 7-9/16"W x 12-1/2"H

Notes: Refer to architectural drawings for location and mounting height.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-08-APage 1

Page 261: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION A)Item Number: TA-10-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar/ WGB5SS18Color/Finish: Satin Stainless SteelSize/Dimensions: 18"W x 1.25"DIA x 2.75"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-10-APage 1

Page 262: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION B)Item Number: TA-10-B

Item Quantity:

Manufacturer: Grohe Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800# : (800) 444-7649 800#: (800) 444-7649

Web: www.grohe.comWeb: www.grohe.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 40793001Color/Finish: 001 ChromeSize/Dimensions: 18"W x 3.66"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-10-BPage 1

Page 263: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION C)Item Number: TA-10-C

Item Quantity:

Manufacturer: Gatco, Inc. Source: Gatco, Inc.

Revision(s):

Contact: Michael I. Goffstein

Phone: (800) 227-5640Fax: (510) 895-5676

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Contact: Michael I. GoffsteinE-mail: [email protected]: [email protected]

800# : (800) 227-5640

Web: www.gatcoinc.comWeb: www.gatcoinc.com

Phone:Fax: (510) 895-5676

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Latitude Grab Bar/ 852Color/Finish: ChromeSize/Dimensions: 18"W x 3"H (mounting plate) x 1.25"DIA x 2.8"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-10-CPage 1

Page 264: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION D)Item Number: TA-10-D

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar / B-5806 x 18Color/Finish: Satin StainlessSize/Dimensions: 18"W x 1-1/4"DIA

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-10-DPage 1

Page 265: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION A)Item Number: TA-11-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar/ WGB5SS36Color/Finish: Satin Stainless SteelSize/Dimensions: 36"W x 1.25"DIA x 2.75"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-11-APage 1

Page 266: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION B)Item Number: TA-11-B

Item Quantity:

Manufacturer: Grohe Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800# : (800) 444-7649 800#: (800) 444-7649

Web: www.grohe.comWeb: www.grohe.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 40795001Color/Finish: 001 ChromeSize/Dimensions: 36"W x 3.66"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-11-BPage 1

Page 267: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION C)Item Number: TA-11-C

Item Quantity:

Manufacturer: Gatco, Inc. Source: Gatco, Inc.

Revision(s):

Contact: Michael I. Goffstein

Phone: (800) 227-5640Fax: (510) 895-5676

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Contact: Michael I. GoffsteinE-mail: [email protected]: [email protected]

800# : (800) 227-5640

Web: www.gatcoinc.comWeb: www.gatcoinc.com

Phone:Fax: (510) 895-5676

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Latitude Grab Bar/ 856Color/Finish: ChromeSize/Dimensions: 36"W x 3"H (mounting plate) x 1.25"DIA x 2.8"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-11-CPage 1

Page 268: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION D)Item Number: TA-11-D

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar / B-5806 x 36Color/Finish: Satin StainlessSize/Dimensions: 36"W x 1-1/4"DIA

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-11-DPage 1

Page 269: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION A)Item Number: TA-12-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar/ WGB5SS42Color/Finish: Satin Stainless SteelSize/Dimensions: 42"W x 1.25"DIA x 2.75"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-12-APage 1

Page 270: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION B)Item Number: TA-12-B

Item Quantity:

Manufacturer: Grohe Source: Grohe

Revision(s):

Contact: Jennifer Humphrey

Phone: (312) 918-8142Fax:

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-

Contact:E-mail: [email protected]:

800# : (800) 444-7649 800#: (800) 444-7649

Web: www.grohe.comWeb: www.grohe.com

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 40796001Color/Finish: 001 ChromeSize/Dimensions: 42"W x 3.66"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-12-BPage 1

Page 271: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION C)Item Number: TA-12-C

Item Quantity:

Manufacturer: Gatco, Inc. Source: Gatco, Inc.

Revision(s):

Contact: Michael I. Goffstein

Phone: (800) 227-5640Fax: (510) 895-5676

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America

Contact: Michael I. GoffsteinE-mail: [email protected]: [email protected]

800# : (800) 227-5640

Web: www.gatcoinc.comWeb: www.gatcoinc.com

Phone:Fax: (510) 895-5676

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Latitude Grab Bar/ 858Color/Finish: ChromeSize/Dimensions: 42"W x 3"H (mounting plate) x 1.25"DIA x 2.8"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-12-CPage 1

Page 272: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION D)Item Number: TA-12-D

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar / B-5806 x 42Color/Finish: Satin StainlessSize/Dimensions: 42"W x 1-1/4"DIA

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-12-DPage 1

Page 273: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 24" Accessible Grab Bar @ Guest

Shower (OPTION A)

Item Number: TA-13-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar/ WGB5SSKN24Color/Finish: Satin Stainless Steel / PreenedSize/Dimensions: 24"W x 1.25"DIA x 2.75"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-13-APage 1

Page 274: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 24" Accessible Grab Bar @ Guest

Shower (OPTION B)

Item Number: TA-13-B

Item Quantity:

Manufacturer: Moen Inc. Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact: Jason ReynoldsE-mail:E-mail:

800# : (800) 289-6636 800#: (800) 289-6636

Web: www.moenpro.comWeb: www.moenpro.com

Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: R8724PColor/Finish: Stainless Steel / PreenedSize/Dimensions: 24"W x 1.25" DIA x 3"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-13-BPage 1

Page 275: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 24" Accessible Grab Bar @ Guest

Shower (OPTION C)

Item Number: TA-13-C

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar / B-5806.99 x 24Color/Finish: Satin Stainless / PreenedSize/Dimensions: 24"W x 1-1/4"DIA

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-13-CPage 1

Page 276: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 30" Accessible Grab Bar @ Guest

Shower (OPTION A)

Item Number: TA-14-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: WGB5SSKN30Color/Finish: Satin Stainless Steel / PreenedSize/Dimensions: 30"W x 1.25"DIA x 2.75"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-14-APage 1

Page 277: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 30" Accessible Grab Bar @ Guest

Shower (OPTION B)

Item Number: TA-14-B

Item Quantity:

Manufacturer: Moen Inc. Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact: Jason ReynoldsE-mail:E-mail:

800# : (800) 289-6636 800#: (800) 289-6636

Web: www.moenpro.comWeb: www.moenpro.com

Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: R8730PColor/Finish: Stainless Steel/ PreenedSize/Dimensions: 30"W x 1.25" DIA x 3"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-14-BPage 1

Page 278: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 30" Accessible Grab Bar @ Guest

Shower (OPTION C)

Item Number: TA-14-C

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar / B-5806.99 x 30Color/Finish: Satin Stainless / PreenedSize/Dimensions: 30"W x 1-1/4"DIA

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-14-CPage 1

Page 279: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar @ Guest

Shower (OPTION A)

Item Number: TA-15-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: WGB5SSKN36Color/Finish: Satin Stainless Steel / PreenedSize/Dimensions: 36"W x 1.25"DIA x 2.75"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-15-APage 1

Page 280: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar @ Guest

Shower (OPTION B)

Item Number: TA-15-B

Item Quantity:

Manufacturer: Moen Inc. Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact: Jason ReynoldsE-mail:E-mail:

800# : (800) 289-6636 800#: (800) 289-6636

Web: www.moenpro.comWeb: www.moenpro.com

Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: R8736PColor/Finish: Stainless Steel / PreenedSize/Dimensions: 36"W x 1.25" DIA x 3"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-15-BPage 1

Page 281: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar @ Guest

Shower (OPTION C)

Item Number: TA-15-C

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Grab Bar / B-5806.99 x 36Color/Finish: Satin Stainless / PreenedSize/Dimensions: 36"W x 1-1/4"DIA

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-15-CPage 1

Page 282: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs

(OPTION A)

Item Number: TA-16-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Kohler Company

Revision(s):

Contact: Doug Johnston

Phone:Fax:

Address:

Address: 444 Highland DriveKohler WI 53044-

Contact:E-mail: [email protected]:Web: ww.kohler.comWeb:

Mobile: (972) 342-8026Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Choreograph / Brick TextureColor/Finish: T01-0 White / Matte finishSize/Dimensions: See Notes

Notes: Panels to extend from top of tub to ceiling - cut in field as required.Finished edge of side walls to align with front edge of tub.

CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH TUB OPENING.Refer to architectural drawings for locations.

Provide the following:(2) 36"W x 72"H Brick Texture Wall Panels(1) 60"W x 72"H Brick Texture Wall Panel(2) 96"H corner joints #K-97635-0 / color WHITE

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-16-APage 1

Page 283: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs

(OPTION B)

Item Number: TA-16-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.

Revision(s):

Contact: Donna Mincey

Phone: (678) 997-2770Fax: (770) 531-0935

Address:

Address: 4321 Browns Bridge Rd.Gainesville GA 30504-

Contact:E-mail: [email protected]:

800#: (800) 533-1806

Web: www.minceymarble.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 3" x 6" Subway Vintage Panel System / TS-VN/3x6Color/Finish: 2250 Solid White / Gloss FinishSize/Dimensions: See Notes

Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.

CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.

Provide the following:(2) 38"W x 80"H 3x6 Subway Panels(1) 60"W x 80"H 3x6 Subway Panel

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-16-BPage 1

Page 284: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs

(OPTION B)

Item Number: TA-16-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: MPL Corporation

Revision(s):

Contact: Jennifer Heath

Phone: (317) 835-9000Fax: (317) 835-3050

Address:

Address: 203 N. Edgerton StreetFairland IN 46126-

Contact:E-mail: [email protected]:Web: www.mpl-corp.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 6" x 24" Smooth TileColor/Finish: Bright White/ GlossySize/Dimensions: See Notes

Notes: Panels to extend from top of tub to ceiling - cut infield as required.Finished edge of side walls to align with front edge oftub.

CONTRACTOR MUST COORDINATE WALL PANELSIZES WITH TUB OPENING.Refer to architectural drawings for locations.

CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.

Provide the following:(2) 34"W x 72"H Brick Texture Wall Panels(1) 60"W x 72"H Brick Texture Wall Panel

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

Tru by Hilton

TA-16-CPage 1

Page 285: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs

(OPTION B)

Item Number: TA-16-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: MPL CorporationInstructions:

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-16-CPage 2

Page 286: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Straight Shower Rod @ Accessible

Roll-in Showers (OPTION A)

Item Number: TA-17-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Oval Straight Shower Rod/ WOCBSTSSPColor/Finish: Satin Stainless Steel FinishSize/Dimensions: 58-61" x 1"DIA x 2-3/8"H

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-17-APage 1

Page 287: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Straight Shower Rod @ Accessible

Roll-in Showers (OPTION B)

Item Number: TA-17-B

Item Quantity:

Manufacturer: Moen Inc. Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact: Jason ReynoldsE-mail:E-mail:

800# : (800) 289-6636 800#: (800) 289-6636

Web: www.moenpro.comWeb: www.moenpro.com

Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Donner Commerical Shower Rod/ 52-5Color/Finish: ChromeSize/Dimensions: 62"-62.5"W x 1.75" DIA x 1.75"D

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-17-BPage 1

Page 288: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Straight Shower Rod @ Accessible

Roll-in Showers (OPTION C)

Item Number: TA-17-C

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Shower Curtain Rod / B-207 x 60Color/Finish: Stainless Steel / Satin FinishSize/Dimensions: 60"W x 1"DIA

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-17-CPage 1

Page 289: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Curved Shower Rod @ Accessible Tub

(OPTION A)

Item Number: TA-18-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Contour Oval Curved Shower Curtain Rod / W0C0N5Color/Finish: Stainless Steel / Satin FinishSize/Dimensions: 58.5" to 60"W x 1"H x 6"Projection

Notes: Refer to architectural drawings for locations and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-18-APage 1

Page 290: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Curved Shower Rod @ Accessible Tub

(OPTION B)

Item Number: TA-18-B

Item Quantity:

Manufacturer: Moen Inc. Source: Moen Inc.

Revision(s):

Contact: Jason Reynolds

Phone:Fax: (800) 628-0894

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America

Contact: Jason ReynoldsE-mail:E-mail:

800# : (800) 289-6636 800#: (800) 289-6636

Web: www.moenpro.comWeb: www.moenpro.com

Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Curved Shower Rod/ CSR2165CHColor/Finish: ChromeSize/Dimensions: 59"W x 2.36"H x x 1"DIA x 5.8"Projection

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-18-BPage 1

Page 291: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Folding Shower Seat @ Accessible Roll-

in Showers (OPTION A)

Item Number: TA-19-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: WSLX320225PWREVColor/Finish: Stainless Steel / Satin Finish / Seat: White PhenolicSize/Dimensions: 32"W x 22-1/2" D x 17"-19" (when folded down)

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-19-APage 1

Page 292: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Folding Shower Seat @ Accessible Roll-

in Showers (OPTION B)

Item Number: TA-19-B

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Reversible Folding Shower Seat / B-5181Color/Finish: Stainless Steel / Satin Finish / Seat: Ivory PhenolicSize/Dimensions: 33"W x 22-5/16"D x 14"H (when folded down)

Notes: Refer to architectural drawings for location and mounting heights.

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-19-BPage 1

Page 293: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Removable Seat @ Accessible Tub

(OPTION A)

Item Number: TA-20-A

Item Quantity:

Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC

Revision(s):

Contact: Salvatore Sisto

Phone: (732) 869-4466Fax: (732) 869-9474

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-

Contact: Salvatore SistoE-mail: [email protected]: [email protected]

800# : (877) 894-6448 800#: (877) 894-6448

Web: www.wingits.comWeb: www.wingits.com

Phone: (732) 869-4466Fax: (732) 869-9474

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Portable Tub Bench / WHPTB265150PWColor/Finish: Phenolic WhiteSize/Dimensions: 15"W x 26.5"L x 16-17.5" Adjustable Height

Notes: Refer to architectural drawings for locations.

Seat is 1/2" Phenolic white finish, stainless steel adjustable legs and tub clamp (adjustable 3.5" to 6")

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-20-APage 1

Page 294: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Baby Changing Station @ Public

Restroom

Item Number: TA-21

Item Quantity:

Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment

Revision(s):

Contact: Customer Service

Phone: (818) 764-1000Fax: (818) 765-2700

Address: 11611 Hart St.N. Hollywood CA 91605-

Address: 11611 Hart St.N. Hollywood CA 91605-

Contact: Customer ServiceE-mail: [email protected]: [email protected]: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/

Phone: (818) 764-1000Fax: (818) 765-2700

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *KB110-SSWMColor/Finish: *Satin Stainless Steel Exterior Finish With Molded

Grey Color Polyethylene InteriorSize/Dimensions: *Unit 35 1⁄4" W, 20" H (890 x 510mm). Depth

(closed) 4" (100mm). Extension (open) 15 3⁄16" (385mm)

Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.

All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.

All quantities to be verified by hotel operator prior to purchasing.•

Tru by Hilton

TA-21Page 1

Page 295: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION

B)

Item Number: T-T-02B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns

Revision(s):

Contact: Nancy Burns

Phone: (404) 661-7111Fax:

Address:

Address: 7834 C.F. Hawn FrwyDallas TX 75217-

Contact:E-mail: [email protected]:Web: www.dal-tile.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication:

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Rittenhouse SquareColor/Finish: 0148 Spa/ Semi-GlossSize/Dimensions: 3" x 6"

Coeff Friction: <0.50 Wet <0.80 DryGrout: Mapei; 77 Frost, 1/8"

Notes: Installation Pattern: 50/50 Brick Running Bond

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•

Tru by Hilton

T-T-02BPage 1

Page 296: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION

B)

Item Number: T-T-02B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy BurnsInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

T-T-02BPage 2

Page 297: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Composition Tile @

Housekeeping, Laundry, and Linen Storage

Item Number: VCT-01

Item Quantity:

Manufacturer: Armstrong Flooring Source: Armstrong Flooring

Revision(s):

Contact: Scott J. Wert, Territory Sales Manager

Phone: (800) 356-9301Fax:

Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America

Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America

Contact: Scott J. Wert, Territory Sales ManagerE-mail: [email protected]: [email protected]

800# : (513) 571-0817 800#: (513) 571-0817

Web: http://www.armstrong.comWeb: http://www.armstrong.com

Phone: (800) 356-9301Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Standard Excelon Imperial TextureColor/Finish: 51908 PewterSize/Dimensions: 12" x 12" x 1/8"

Notes: Full Spread Adhesives –S-515 High-Moisture, S-525 High-Moisture, S-700 Thin Spread, S-750 Premium

Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

VCT-01Page 1

Page 298: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom

(OPTION A)

Item Number: VF-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address:

Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Concierge 800Q8Color/Finish: *520 LuminousSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness

Notes: *40 mil Wear Layer

Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

VF-01-APage 1

Page 299: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom

(OPTION A)

Item Number: VF-01-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:

Quantities must be verified by installer.•

Tru by Hilton

VF-01-APage 2

Page 300: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom

(OPTION B)

Item Number: VF-01-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *TRU-L1Color/Finish: 936 Converse BasinSize/Dimensions: 6" x 36" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700

Glue underlayment to subfloor with MS160 spray adhesive.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

VF-01-BPage 1

Page 301: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom

(OPTION B)

Item Number: VF-01-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:

Quantities must be verified by installer.•

Tru by Hilton

VF-01-BPage 2

Page 302: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom

(OPTION C)

Item Number: VF-01-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Solitude 0648VColor/Finish: 48120 Cottonwood / ExoGuard Quartz Enhanced

UrethaneSize/Dimensions: 6" x 48" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

VF-01-CPage 1

Page 303: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom

(OPTION C)

Item Number: VF-01-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-01-CPage 2

Page 304: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom

(OPTION A)

Item Number: VF-02-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address:

Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Concierge 800Q8Color/Finish: *580 Black OutSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness

Notes: *40 mil wear layer.

Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturers instructions.

Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

VF-02-APage 1

Page 305: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom

(OPTION A)

Item Number: VF-02-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:

Quantities must be verified by installer.•

Tru by Hilton

VF-02-APage 2

Page 306: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom

(OPTION B)

Item Number: VF-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *TRU-L2Color/Finish: 872 Picton ParkSize/Dimensions: 6" x 36" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700

Glue underlayment to subfloor with MS160 spray adhesive.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

VF-02-BPage 1

Page 307: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom

(OPTION B)

Item Number: VF-02-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:

Quantities must be verified by installer.•

Tru by Hilton

VF-02-BPage 2

Page 308: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom

(OPTION C)

Item Number: VF-02-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Solitude 06486VColor/Finish: 48549 Char / ExoGuard Quartz Enhanced UrethaneSize/Dimensions: 6" x 48" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

VF-02-CPage 1

Page 309: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

13Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom

(OPTION C)

Item Number: VF-02-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:

Quantities must be verified by installer.•

Tru by Hilton

VF-02-CPage 2

Page 310: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Lobby

(OPTION A)

Item Number: VF-03-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address:

Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Concierge 800Q8Color/Finish: *520 LuminousSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness

Notes: *40 mil wear layer.

Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-03-APage 1

Page 311: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Lobby

(OPTION B)

Item Number: VF-03-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *TRU-L1Color/Finish: 936 Converse BasinSize/Dimensions: 6" x 36" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700

Glue underlayment to subfloor with MS160 spray adhesive.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-03-BPage 1

Page 312: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Lobby

(OPTION C)

Item Number: VF-03-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Solitude 0648VColor/Finish: 48120 Cottonwood / ExoGuard Quartz Enhanced

UrethaneSize/Dimensions: 6" x 48" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-03-CPage 1

Page 313: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Medium Luxury Vinyl Tile @ Lobby

(OPTION A)

Item Number: VF-04-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address:

Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Concierge 800Q8Color/Finish: *560 OvercastSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness

Notes: *40 mil wear layer.

Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-04-APage 1

Page 314: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Medium Luxury Vinyl Tile @ Lobby

(OPTION B)

Item Number: VF-04-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *TRU-L3Color/Finish: 148 Atwell MillSize/Dimensions: 6" x 36" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700

Glue underlayment to subfloor with MS160 spray adhesive.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-04-BPage 1

Page 315: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Medium Luxury Vinyl Tile @ Lobby

(OPTION C)

Item Number: VF-04-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Solitude 0648VColor/Finish: 48599 French Gray / ExoGuard Quartz Enhanced

UrethaneSize/Dimensions: 6" x 48" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-04-CPage 1

Page 316: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Lobby

(OPTION A)

Item Number: VF-05-A

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring

Revision(s):

Contact: Theresa Schneider

Phone:Fax:

Address:

Address: P.O Box 1527Dalton GA 30722-1527

Contact:E-mail: [email protected]:

800#: (800) 713-6697

Web: www.patcraft.comWeb:

Mobile: (513) 805-1070Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Concierge 800Q8Color/Finish: *580 Black OutSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness

Notes: *40 mil wear layer.

Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturers instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-05-APage 1

Page 317: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Viny Tile @ Lobby

(OPTION B)

Item Number: VF-05-B

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.

Revision(s):

Contact: Karin Hockman

Phone: (410) 233-3891Fax:

Address:

Address: 160 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:

800#: (800) 241-4494

Web: www.mohawkind.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *TRU-L2Color/Finish: 872 Picton ParkSize/Dimensions: 6" x 36" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700

Glue underlayment to subfloor with MS160 spray adhesive.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-05-BPage 1

Page 318: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Viny Tile @ Lobby

(OPTION C)

Item Number: VF-05-C

Item Quantity:

Manufacturer: REQUIRED VENDOR Source: Shaw Industries

Revision(s):

Contact: Nancy Dickinson

Phone: (513) 673-3600Fax:

Address:

Address: 185 South Industrial Blvd.Calhoun GA 30701-

Contact:E-mail: [email protected]:Web: www.shawcontractgroup.comWeb:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: Solitude 0648VColor/Finish: 48549 Char / ExoGuard Quartz Enhanced UrethaneSize/Dimensions: 6" x 48" / 5mm thickness

Notes: 20 mil Wear Layer

Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm

Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.

Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.

Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Quantities must be verified by installer.•

Tru by Hilton

VF-05-CPage 1

Page 319: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by Hilton

Issue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wood Finish @ Lobby Trellis Post and

Beams

Item Number: WD-01

Item Quantity:

Manufacturer: To Bid Source: To Bid

Revision(s):

Contact:

Phone:Fax:

Address:

Address:

Contact:E-mail:E-mail:Web:Web:

Phone:Fax:

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: 6"x6" Pine Timber, Grade No.1 or betterColor/Finish: Stained to match Minwax Weathered Oak 270Size/Dimensions: Refer to notes

Notes: 6"x6" timber planed to 5-1/4"x 5-1/4" with eased corners - refer to architectural drawings for details and dimensions.

Less than 8% MC (Moisture Content)

Instructions:Must be of contract quality and suitable for commercial use.•Provide clear alcohol, water, and burn resistant penetrating sealer.•All wood to be kiln dried and treated to be insect and vermin free.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

Tru by Hilton

WD-01Page 1

Page 320: ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONS V1.3

11Project #: Tru by HiltonIssue Date: 11/22/16

Project Name: V1.3 Prototypical Architectural SpecsItem Description: Polyester Webbing @ Media WallItem Number: WEB-01

Item Quantity:

Manufacturer: Strapworks Source: Strapworks

Revision(s):

Contact:

Phone: (541) 741-0658Fax: (541) 741-7625

Address: 3900 W 1st Ave.Eugene OR 97402-

Address: 3900 W 1st Ave.Eugene OR 97402-

Contact:E-mail: [email protected]: [email protected]: www.strapworks.comWeb: www.strapworks.com

Phone: (541) 741-0658Fax: (541) 741-7625

Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: RL

Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate

Product: *Polyester Seat Belt WebbingColor/Finish: *Red / ColorfastSize/Dimensions: *2" Wide

Notes: *Webbing must be moisture resistant, UV resistant, Colorfast, and have high breaking strength and abrasion resistance.

Instructions:Must be of contract quality and suitable for commerical use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.

All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.

Tru by Hilton

WEB-01Page 1