arcat | free building product cad details, bim, …€¦ · web viewliftmaster 823lm remote light...

SECTION 32 31 00ELECTRIC GATE OPERATORS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2006 - 2015 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Electric Gate Operators:1. Residential/Light Commercial DC Linear Actuator (LiftMaster Model LA500DC).2. Residential DC Linear Actuator (LiftMaster Model LA400DC).3. Solar Residential DC Linear Actuator (LiftMaster Model LA412DC).4. Commercial High Traffic DC Swing Gate Operator (LiftMaster Model CSW24U).5. Residential/Light Commercial DC Swing Gate Operator (LiftMaster Model RSW12U).6. Commercial AC swing gate operators (LiftMaster Model CSW200 Series).

a. High-traffic commercial swing gate operators (LiftMaster Model CSW200501U).b. High-traffic commercial swing gate operators (LiftMaster Model CSW200101U).c. High-traffic/high-temperature commercial swing gate operators (LiftMaster

Model CSW200ULDM).7. Commercial High Traffic DC Slide Gate Operator (LiftMaster Model CSL24U).8. Residential/Light Commercial DC Slide Gate Operator (LiftMaster Model RSL12U).9. Commercial AC slide gate operators (LiftMaster Model SL3000 Series).

a. High-traffic commercial slide gate operators (LiftMaster Model SL3000501U).b. Dual-motor/high-temperature commercial slide gate operators (LiftMaster

Model SL3000101U).10. Heavy-duty, industrial, gear-driven slide gate operators (LiftMaster Model SL595).11. Heavy-duty, industrial, gear-driven slide gate operators (LiftMaster Model SL585).12. High-performance commercial DC barrier gate operators with built-in Battery Backup

(LiftMaster Model MA Series).13. High-speed commercial DC barrier gate operators with built-in Battery Backup

(LiftMaster Model MAS Series High Speed).14. Heavy-duty industrial barrier gate operators (LiftMaster Model BG770).15. Heavy-duty industrial barrier gate operators (LiftMaster Model BG790).16. Commercial overhead door and gate operators (LiftMaster Model HCT Series).

a. Overhead door and gate operators (LiftMaster Model HCTDCPKGU08).b. Overhead door and gate operators (LiftMaster Model HCTDCPKGU10).c. Overhead door and gate operators (LiftMaster Model HCTDCPKGU12).

B. Monitored Photo Eyes1. Monitored Retro-Reflective Photo Eyes (LiftMaster Model LMRRU)2. Monitored Through-Beam Photo Eyes (LiftMaster Model LMTBU)

1.2 RELATED SECTIONS

A. Section 32 31 23 - Plastic Fences and Gates.

B. Section 03 30 00 - Cast-in-Place Concrete.

C. Section 11 12 26.13 - Parking Fee Coin Collection Equipment.

32 31 00-1

D. Division 16 - Requirements for electrical connections.

1.3 REFERENCES

A. National Electrical Manufacturers Association (NEMA): NEMA ICS 6 - Industrial Control and Systems: Enclosures.

B. Underwriters Laboratories (UL): UL 325 - Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems.

C. Underwriters Laboratories (UL): UL 991 - Standard for Tests for Safety-Related Controls Employing Solid-State Devices.

D. International Organization for Standardization: ISO 9001 - Quality Management Systems.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Equipment list, system description, electrical wiring diagrams for installation, and manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Shop Drawings: Submit shop drawings showing layout, profiles, and product components, including anchorage, edge conditions, and accessories.1. Operation, installation, and maintenance manuals including wiring diagrams.2. Risers, layouts, and special wiring diagrams showing any changes to standard

drawings.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Deliver, store, and handle materials and products in strict compliance with manufacturer's instructions and industry standards.

B. Store products indoors in manufacturer's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.

1.6 QUALITY ASSURANCE

A. Manufacturer Qualifications: ISO 9001 Certified Manufacturer.

B. Installer Qualifications: Installation performed by factory authorized contractor specifically trained in gate operation systems of the type found within this section.1. Provide documentation of maintenance and repair service availability for emergency

conditions.2. Provide quarterly maintenance for one year following Substantial Completion of the

Project.

1.7 WARRANTY

A. Manufacturer's Standard Limited Warranty:1. Warranty Period: 2 years.2. Warranty Period: 2 years for operator, 10 years for operator frame.3. Warranty Period: 3 years for residential applications.4. Warranty Period: 5 years.5. Warranty Period: 5 years for commercial applications, 7 years for residential

32 31 00-2

applications.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: LiftMaster, which is located at: 300 Windsor Dr.; Oak Brook, IL 60523; Toll Free Tel: 800-282-6225; Fax: 630-516-8412; Email:request info ([email protected]); Web:LiftMaster.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 GATE OPERATORS

A. Gate Operators: LiftMaster LA500DC Residential/Light Commercial DC Linear Actuator.1. LiftMaster LA500PKGU Single Actuator Arm package contains:

a. LA500DC Single Actuator Arm1) Full length commercial housing corrosion resistant aluminum.2) Molecular bonded self-lubricating drive screw.

b. LA500CONTU Control Box for single or master/second application.2. LiftMaster LA500DCS Second Actuator Arm with junction box and 40 foot (12.2 m)

direct burial cable for primary/secondary applications.3. LiftMaster LA500CONTXLMU Alternate Control Box for single or master/second

applications desiring more room for accessories or two 33 Ah batteries for solar applications.

4. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.a. This model is intended for use in Class I, II, III and IV vehicular swing gate

applications.b. To be UL 325 compliant, two independent safety entrapment protection devices

must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.

c. Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.

5. Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:a. Main Board:

1) 1 Monitored Close Photo Eye input2) 1 Monitored Open Photo Eye input3) 1 Monitored Open Safety Edge or Open Photo Eye input

b. Expansion Board1) 2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or

Close).2) 1 Monitored Photo Eye input (selectable for Open or Close).

c. 8 Monitored edges available when Transceiver is added.6. Electrical Power Requirements:

a. 115V AC, single phaseb. 230V AC, single phase.

7. Motor: 24V DC, with soft start/stop operation.a. Duty cycle: Continuous duty.

8. Capacity: 12 foot (3658 mm) gate at 1,200 pounds (554 kg) or 18-foot (5486 mm) gate at 600 pounds (272 kg).

9. Recommended Cycles per Day: 300.

32 31 00-3

10. Gate Travel Speed: 90-degree opening in 15 to 18 seconds.11. Warranty: 2 years.12. Wormgear Reduction: Precision machined metal gears contained in lubrication

housing.13. Battery Backup: Power Management system draws 14.8 mA when gate is idle.

Provides 500 cycles on Battery Backup with two 7 Ah batteries with remote controls programmed.

14. Standby Time: Provides up to 24 days of standby power in the event of a power loss (excluding accessories).

15. Solar Capable: See daily solar cycle chart.16. Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and

unswitched power.17. Chassis: Commercial-duty die cast aluminum housing.18. Internet Connectivity: MyQ Technology

a. 902 to 928 MHzb. 50-channel FHSS (Frequency Hopping Spread Spectrum).c. LiftMaster 828LM Internet Gateway enables monitoring and control of gate

operators via internet-enabled smartphone, tablet or computer.d. Provides two-way communication between gate operator and MyQ accessories

to enable remote open, close and monitoring of gate.19. Receiver:

a. Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible.

b. Transmits 310 MHz, 315 MHz, 390 MHz.20. Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate

when closing or stops/reverses the gate when opening.21. Electronic Limits: Maintains accurate limit position throughout travel, even after using

the manual release handle.22. Dual-gate operation capabilities to allow 2 separate gate operators to operate in

unison at a single entrance. Standard control box compatible with single or dual gates with no extra parts.

23. Wireless Dual-Gate Operation:a. Built-in wireless communication will operate primary and secondary operator

without having to run a communication wire.b. Support for Through-beam photo eye in the wireless dual-gate setup. Can

attach emitter and receiver to each operator, eliminating the communication wire between them.

24. Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure primary gate closes last, avoiding potential damage to the gate.

25. Synchronized Close: Selectable feature for dual-gate applications with curved driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time. Only available if two control boxes are used.

26. LED Diagnostic Display: Simplifies installation and troubleshooting.27. Colored Terminal Blocks: Provides easy identification of safety and fire department

inputs.28. Programmable Auxiliary Relays: 2 programmable relays with 6 settings each

a. Pre-warning or gate-in-motion sounder.b. Switch on/off devices at open or Close Limits or while gate is in motion..c. Tamper detection if gate is pushed off Close Limit.d. Cycle quantity feedback.e. Red/Green light to control gate traffic.

29. Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.30. Sequenced Access Management: Capable of sequentially controlling the operator in

tandem with barrier gate.

32 31 00-4

31. Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.32. Alarm Reset Button: Instantly resets the built-in safety alarm siren.33. Fire Department Compliant: Selectable settings allow gate to auto open on power

failure or battery depletion.34. Surge Suppression: Industrial strength on high and low voltage outputs. Protects

against lightning strikes at a 50-foot (15240 mm) radius.35. Emergency Release: Simple-to-use keyed release handle allows gate to be operated

manually and maintain limit position once re-engaged.36. Chassis: Commercial-duty die cast aluminum housing.37. Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60

degrees C)38. MyQ Enabled Accessories:

a. LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internet-enabled computer or smartphone.

b. LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.

c. LiftMaster 823LM Remote Light Switch: Controls light remotely.d. LiftMaster 825LM Remote Light Control: Allows remote monitoring and

operation.39. Accessories: Safety Monitoring Devices:

a. Monitored Photo Eyes and Wireless Edge Kits.1) LiftMaster LMRRU Reflective Photo Eyes.2) LiftMaster LMTBU Thru-Beam Photo Eyes.3) LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and

Receiver.4) LiftMaster LMWETXU Wireless Edge Transceiver

b. Wired Monitored Edges (all require use of LMWEKITU)1) LiftMaster S Small Profile Monitored Edge2) LiftMaster L50 Large Profile Monitored Edge3) LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge4) LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge5) LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge6) LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge7) LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge8) LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge

40. Accessories: Provide the optional accessories listed below.a. LiftMaster LOOPDETLM Plug-in Loop Detectorb. LiftMaster KPW5 Wireless Commercial Keypadc. LiftMaster KPW250 - Wireless Commercial Keypadd. LiftMaster SP10W12V - 10W Solar Panel Kite. LiftMaster MG1300 Maglock - 1,300 pound (590 kg) holding force.f. LiftMaster 892LT 2-button Security+ 2.0 Learning Remote Controlg. LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Controlh. LiftMaster 811LM 1-Button Encrypted DIP Remote Controli. LiftMaster 813LM 3-Button Encrypted DIP Remote Controlj. LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System

B. Gate Operators: LiftMaster LA400 Residential DC Linear Actuator.1. LiftMaster LA400PKGU Single Actuator Arm Package contains:

a. LA400DC Single Actuator Armb. Cast aluminum corrosion-resistant body, stainless steel piston.c. LA400CONTU Control Box for single or master/second application.

2. LiftMaster LA400DCS Second Actuator Arm with junction box and 40 foot (12.2 m) direct burial cable for primary/secondary applications.

3. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.

32 31 00-5

a. This model is intended for use in Class I, II, III and IV vehicular swing gate applications.

b. To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.




b. 8 Monitored edges available when Transceiver is added.5. Electrical Power Requirements: 115V AC, single phase6. Motor: 24V DC, with soft start/stop operation.

a. Duty cycle: Continuous duty.7. Capacity: 16-foot (4877 mm) gate at 550 pounds (249 kg).8. Recommended Cycles per Day: 100.9. Gate Travel Speed: 90-degree opening in 15 to 18 seconds.10. Warranty: 2 years.11. Wormgear Reduction: Precision machined metal gears contained in lubrication

housing.12. Battery Backup: Power Management system draws 3.7 mA when gate is idle with

remote controls programmed. Provides 400 cycles on Battery Backup with two 7 Ah batteries.







a. Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible







attach emitter and receiver to each operator, eliminating the communication

32 31 00-6

wire between them.23. Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed

and position of each gate and adjusts speed as necessary to ensure primary gate closes last, avoiding potential damage to the gate.



inputs.27. Alarm Reset Button: Instantly resets the built-in safety alarm siren.28. Fire Department Compliant: Selectable settings allow gate to auto open on power



manually and maintain limit position once re-engaged.31. Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60


a. LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer or smartphone.






b. Wired Monitored Edges (all require use of LMWEKITU)1) LiftMaster S50 Small Profile Monitored Edge2) LiftMaster L50 Large Profile Monitored Edge3) LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge4) LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge5) LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge6) LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge7) LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge8) LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge

34. Accessories: Provide the optional accessories listed below.a. LiftMaster KPW5 Wireless Commercial Keypadb. LiftMaster KPW250 Wireless Commercial Keypadc. LiftMaster SP10W12V: 10W Solar Panel Kitd. LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding forcee. LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Controlf. LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Controlg. LiftMaster 811LM 1-Button Encrypted DIP Remote Controlh. LiftMaster 813LM 3-Button Encrypted DIP Remote Controli. LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry Systemj. LiftMaster K1D8080-1CC Expansion Boardk. LiftMaster LOOPDETLM Plug-in Loop Detector (requires expansion board)

32 31 00-7

C. Gate Operators: LiftMaster LA412DC Solar Residential DC Linear Actuator.1. LiftMaster LA412PKGU Single Actuator Arm Solar Package contains:

a. LA412DC Single Actuator Arm1) Cast aluminum corrosion-resistant body, stainless steel piston.

b. LA412CONTU Control Box for single or master/second applicationc. 10 Watt Solar Panel Kit

2. LiftMaster LA412DCS Second Actuator Arm with junction box and 40 foot (12.2 m) direct burial cable for primary/secondary applications.

3. LiftMaster XLSOLARCONTU Alternate Control Box for single or master/second applications desiring more room for accessories or two 33 Ah batteries for solar applications.

4. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.a. This model is intended for use in Class I, II, III and IV vehicular swing gate






b. 8 Monitored edges available when Transceiver is added.6. Electrical Power Requirements: 115V AC, single phase.7. Motor: 12V DC, with soft start/stop operation.8. Capacity: 16-foot (4877 mm) gate at 550 pounds (249 kg).9. Recommended Cycles per Day: 50.10. Gate Travel Speed: 90-degree opening in less than 23 seconds.11. Warranty: 2 years.12. Wormgear Reduction: Precision machined metal gears contained in lubrication

housing.13. Solar Power Management system draws 5.7 mA when gate is idle. Provides 1160

cycles with two 7 Ah batteries.14. Standby Time: Provides up to 126 days of standby power in the event of no sun or

loss of AC power.15. Solar Capable: See daily solar cycle chart.16. Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and







32 31 00-8













manually and maintain limit position once re-engaged.32. Operating Temperature Range: -40 degrees F (-40 degrees C) to 140 degrees F (60









35. Accessories: Provide the optional accessories listed below.

32 31 00-9

a. LiftMaster KPW5 Wireless Commercial Keypadb. LiftMaster SGLOCK12V Solenoid Lockc. LiftMaster SOLPNL10W12V 10 Watt Solar Paneld. LiftMaster SOLPNL20W12V 20 Watt Solar Panele. LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Controlf. LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Controlg. LiftMaster 811LM 1-Button Encrypted DIP Remote Controlh. LiftMaster 813LM 3-Button Encrypted DIP Remote Controli. LiftMaster K1D8080-1CC Expansion Boardj. LiftMaster LOOPDETLM Plug-in Loop Detector (requires Expansion Board)

D. Gate Operators: LiftMaster CSW24U Commercial High Traffic DC Swing Gate Operator.1. LiftMaster CSW24U Swing Gate Operator.2. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247

standards.a. This model is intended for use in Class I, II, III and IV vehicular swing gate










5. Motor: 24V DC, with soft start/stop operation.a. Duty cycle: Continuous duty.

6. Capacity: 12 foot (3658 mm) gate at 1,200 pounds (554 kg) or 18-foot (5486 mm) gate at 600 pounds (272 kg).

7. Recommended Cycles per Day: Continuous duty.8. Gate Travel Speed: 90-degree opening in 13 to 15 seconds.9. Warranty: 5 years for commercial applications, 7 years for single-home applications.10. Wormgear Reduction: 2 commercial oil bath gearboxes with 900:1 wormgear

reduction running in synthetic oil bath. Hardened output shafts designed for high cycle applications with frequent loop reversals.

11. Battery Backup: Power Management system draws 14.8 mA when gate is idle with remote controls programmed. Provides 146 cycles on Battery Backup with two 7 Ah batteries or 876 cycles with two 33 Ah batteries.

12. Standby Time: Provides up to 24 days of standby power in the event of a power loss with two 7 Ah batteries or 105 days with two 33 Ah batteries (excluding accessories).


unswitched power.15. Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.

32 31 00-10

16. Cover: High-density, UV-resistant polycarbonate two-piece cover.17. Internet Connectivity: MyQ Technology








unison at a single entrance.22. Wireless Dual-Gate Operation:

a. Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.

b. Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.

23. Soft Stop & Start during mid-travel reversal extends operator life under high-cycle, heavy gate use.


25. Synchronized Close: Selectable feature for dual-gate applications with curved driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.





tandem with barrier gate.31. Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.32. Alarm Reset Button: Instantly resets the built-in safety alarm siren.33. Fire Department Compliant: Selectable settings allow gate to auto open on power


against lightning strikes at a 50-foot (15240 mm) radius.35. Emergency Release: Simple-to-use release handle allows gate to be operated

manually and maintain limit position once re-engaged.36. Operating Temperature Range:

a. Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)b. With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60

degrees C)

32 31 00-11

37. MyQ Enabled Accessories:a. LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internet-

enabled computer or smartphone.b. LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and

operation.c. LiftMaster 823LM Remote Light Switch: Controls light remotely.d. LiftMaster 825LM Remote Light Control: Allows remote monitoring and





39. Accessories: Provide the optional accessories listed below.a. LiftMaster LOOPDETLM Plug-in Loop Detectorb. LiftMaster KPW250 - Wireless Commercial Keypadc. LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Controld. LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Controle. LiftMaster 811LM 1-Button Encrypted DIP Remote Controlf. LiftMaster 813LM 3-Button Encrypted DIP Remote Controlg. LiftMaster IPAC - Internet Protocol Access Control Entry Systemh. LiftMaster EL2000SS Stainless Steel Commercial and Gated Community

Telephone Entry System.i. LiftMaster Star1000 Commercial Access Control Receiverj. LiftMaster PPWR Passport Receiver with Security+ 2.0 Technologyk. LiftMaster PPV1 Passport 1-Button Remotel. LiftMaster PPK1 Passport 1-Button Mini Remotem. LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity

Readern. LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding forceo. LiftMaster MPEL: Mounting plate for post mountp. LiftMaster HTR Heater Kit

E. Gate Operators: LiftMaster RSW12U Residential/Light Commercial DC Swing Gate Operator.1. LiftMaster RSW12U Swing Gate Operator.2. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247




c. Only LiftMaster monitored photo eyes or edge sensors may be used with this

32 31 00-12

operator to meet the UL 325 Standard.3. Monitored Safety Inputs: 3 inputs per board (main board and expansion board)

totaling 6 inputs with any combination of up to:a. Main Board:


b. 8 Monitored edges available when Transceiver is added.4. Electrical Power Requirements: 115 V AC, single phase.5. Motor: 12V DC, with soft start/stop operation.6. Capacity: 12 foot (3658 mm) gate at 600 pounds (272 kg) or 16-foot (4900 mm) gate

at 400 pounds (181 kg).7. Recommended Cycles per Day: 250.8. Gate Travel Speed: 90-degree opening in 15 to 17 seconds.9. Warranty: 3 years.10. Wormgear Reduction: 2 commercial oil bath gearboxes with 30:1 wormgear reduction

running in synthetic oil bath.11. Battery Backup: Power Management system draws 5.7 mA when gate is idle with




unswitched power.15. Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.16. Cover: High-density, UV-resistant polycarbonate two-piece cover.17. Internet Connectivity: MyQ Technology













25. Synchronized Close: Selectable feature for dual-gate applications with curved

32 31 00-13

driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.







degrees C)33. MyQ enabled Accessories:








35. Accessories: Provide the optional accessories listed below.a. LiftMaster KPW5 Wireless Commercial Keypadb. LiftMaster KPW250 Wireless Commercial Keypadc. LiftMaster SP10W12V: 10W Solar Panel Kitd. LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding forcee. LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Controlf. LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Controlg. LiftMaster 811LM 1-button Encrypted DIP Remote Controlh. LiftMaster 813LM 3-Button Encrypted DIP Remote Controli. LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry Systemj. LiftMaster K1D8080-1CC Expansion Boardk. LiftMaster LOOPDETLM Plug-in Loop Detector (requires expansion board)l. LiftMaster HTR Heater Kit

F. Gate Operators: LiftMaster CSW200 Series Commercial Swing Gate Operators.1. LiftMaster CSW200501U Commercial Swing Gate Operator for high-traffic

32 31 00-14

applications.a. Description: High Cycle High Temperature 1/2 HP continuous duty motor with

class H High Temperature Insulationb. Capacity: 8-foot (2438 mm) gate at 1,600 pounds (726 kg) or 18-foot (5486

mm) gate at 600 pounds (272kg)c. Recommended Cycles per Hour: Continuous

2. LiftMaster CSW200101U Commercial Swing Gate Operator with 1 HP capacity for heavy-duty applications.a. Description: Two High Cycle High Temperature 1/2 HP continuous duty motors

with class H High Temperature Insulation, designed for large, heavy wrought-iron gates.

b. 250 pounds (113.4 kg) of pulling torquec. Capacity: 12 foot (3658 mm) gate at 2,000 pounds (907 kg) or 22-foot (6706

mm) gate at 1,000 pounds (454 kg).d. Recommended Cycles per Hour: Continuous duty.

3. Warranty: 5 years for commercial applications, 7 years for residential applications.4. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247









c. 8 Monitored edges available when Transceiver is added.6. Electrical Power Requirements: 115V, single phase.

a. Accessory Electrical Power Requirements: 24V DC 500 mA output, switched or unswitched power.

7. Wormgear Reduction: 2 Commercial oil bath gearboxes, 900:1 wormgear reduction. Hardened output shafts designed for high cycle applications with frequent loop reversals.

8. Gate Traveling Speed: 90-degree opening in 13-15 seconds.9. Chassis: Constructed with 1/4-inch (6 mm) sanded, welded and gold zinc-plated sheet

metal.10. Finishing: Metal parts are gold zinc-plated for rustproof protection.11. Cover: High-density UV-resistant polyethylene material.12. Internet Connectivity: MyQ Technology.


operators via internet-enabled smartphone, tablet or computerd. Provides two-way communication between gate operator and MyQ accessories


32 31 00-15

a. Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible

b. Transmits 310 MHz, 315MHz, 390 MHz14. Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate

when closing or stops/reverses the gate when opening.15. Soft Stop extends operator life under high-cycle, heavy gate use.16. Emergency Release: Release handles allows gate to be operated manually and

maintain limit position once re-engaged.17. Wireless Dual-Gate Operation:


b. Support for through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.

18. Bi-Part Delay: Selectable feature for dual-gate applications. Dial provides manual adjustment to control delay as necessary to ensure primary gate closes last, avoiding potential damage to the gate.


inputs.21. Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.

a. Pre-warning or gate-in motion sounderb. Switch on/off devices at open or Close Limits or while gate is in motion.c. Tamper detection if gate is pushed off Close Limitd. Cycle quantity feedback.e. Red/Green Light to control gate traffic.


tandem with a barrier gate.24. Surge/Lightning Protection: Industrial surge protection on high and low voltage inputs.

Protects against lightning strikes at a 50-foot (15.2 m) radius.25. Plug-in loop detector inputs: Programmed inputs for shadow, interrupt and exit.26. External Alarm Reset Button: Allows for quick reset of the gate operator when the

alarm has been activated.27. Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for

pre-operation warning; provides 3-second warning prior to and during gate movement.28. Mechanical Limit System: Maintains accurate gate position throughout gate travel,

even after using manual disconnect.29. Operating Temperature Range:

a. Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).b. With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F(60

degrees C).30. MyQ Enabled Accessories:

a. LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer, tablet or smartphone.


c. LiftMaster 823LM Remote Light Switch: Controls light remotelyd. LiftMaster 825LM Remote Light Control: Allows remote monitoring and



Receiver.

32 31 00-16

4) LiftMaster LMWETXU Wireless Edge Transceiverb. Wired Monitored Edges (all require use of LMWEKITU)

1) LiftMaster S50 Small Profile Monitored Edge2) LiftMaster L50 Large Profile Monitored Edge3) LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge4) LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge5) LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge6) LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge7) LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge8) LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge



Readern. LiftMaster HTRNB Heater Kito. LiftMaster Advanced Traffic Management Quick-Close Option

G. Gate Operators: LiftMaster CSL24U Commercial High Traffic DC Slide Gate Operator.1. LiftMaster CSL24U Slide Gate Operator.2. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247

standards.a. This model is intended for use in Class I, II, III and IV vehicular slide gate










5. Motor: 24V DC, with soft start/stop operation.

32 31 00-17

a. Duty cycle: Continuous duty.6. Capacity: 50-foot (15200 mm) gate at 1,500 pounds (680 kg).7. Recommended Cycles per Day: Continuous duty.8. Gate Travel Speed: 12 inches (304 mm) per second.9. Warranty: 5 years for commercial applications, 7 years for single-home applications.10. Wormgear Reduction: Commercial oil bath gearbox with 10:1 wormgear reduction

running in synthetic oil bath.11. Battery Backup: Power Management system draws 14.8 mA when gate is idle with

remote controls programmed. Provides 208 cycles on Battery Backup with two 7 Ah batteries or 1179 cycles with two 33 Ah batteries.

12. Standby Time: Provides up to 24 days of standby power in the event of a power loss with two 7 Ah batteries or 105 days with two 33 Ah batteries (excluding accessories).


unswitched power.15. Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.16. Cover: High-density, UV-resistant polycarbonate two-piece cover.17. Internet Connectivity: MyQ Technology







the manual disconnect.21. Dual-gate operation capabilities to allow 2 separate gate operators to operate in




23. PosiLock: Automatically powers the operator and returns a gate to the closed position when gate is pushed off of its closed limits.

24. Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.

25. Synchronized Close: Selectable feature for dual-gate applications. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.



a. Pre-warning or gate-in-motion sounder.b. Switch on/off devices at open or Close Limits or while gate is in motion..c. Tamper detection if gate is pushed off Close Limit.d. Cycle quantity feedback.

32 31 00-18

e. Red/Green light to control gate traffic.29. Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.30. Sequenced Access Management: Capable of sequentially controlling the operator in

tandem with barrier gate.31. Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.32. Alarm Reset Button: Instantly resets the built-in safety alarm siren.33. Fire Department Compliant: Selectable settings allow gate to auto open on power


against lightning strikes at a 50-foot (15240 mm) radius.35. Keyed Manual Disconnect: Simple-to-use disconnect allows gate to be operated













Reader

32 31 00-19

n. LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding forceo. LiftMaster MPEL: Mounting plate for post mountp. LiftMaster HTR Heater Kit

H. Gate Operators: LiftMaster RSL12U Residential/Light Commercial DC Slide Gate Operator.1. LiftMaster RSL12U Slide Gate Operator.2. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247







b. 8 Monitored edges available when Transceiver is added.4. Electrical Power Requirements: 115V AC, single phase5. Motor: 12V DC, with soft start/stop operation.6. Capacity: 25 foot (7600 mm) gate at 800 pounds (363 kg).7. Recommended Cycles per Day: 120.8. Gate Travel Speed: 10 inches (254 mm) per second.9. Warranty: 3 years.10. Wormgear Reduction: 15:1 wormgear reduction running in synthetic oil bath.11. Battery Backup: Power Management system draws 5.7 mA when gate is idle with




unswitched power.15. Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.16. Cover: High-density, UV-resistant polyethylene cover.17. Internet Connectivity: MyQ Technology







the manual disconnect.21. Dual-gate operation capabilities to allow 2 separate gate operators to operate in

32 31 00-20




23. PosiLock: Automatically powers the operator and returns a gate to the closed position when gate is pushed off of its closed limit.

24. Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.

25. Synchronized Close: Selectable feature for dual-gate applications. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.




against lightning strikes at a 50-foot (15240 mm) radius.31. Keyed Manual Disconnect: Simple-to-use disconnect allows gate to be operated











35. Accessories: Provide the optional accessories listed below.a. LiftMaster KPW5 Wireless Commercial Keypadb. LiftMaster KPW250 Wireless Commercial Keypad

32 31 00-21

c. LiftMaster SP10W12V: 10W Solar Panel Kitd. LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force.e. LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control.f. LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control.g. LiftMaster 811LM 1-button Encrypted DIP Remote Control.h. LiftMaster 813LM 3-Button Encrypted DIP Remote Control.

I. Gate Operators: LiftMaster SL3000 Series Commercial Slide Gate Operators.1. LiftMaster SL3000501U Commercial Slide Gate Operator for high-traffic applications.

a. High Cycle High Temperature 1/2 HP Continuous Duty Motor with Class H High Temperature Insulation.

b. Maximum Gate Weight: 1,000 pounds (454 kg.).c. Maximum Gate Length: 37 feet (11.2 m).d. Recommended Cycles/Hour: Continuous duty.

2. LiftMaster SL3000101U Commercial Slide Gate Operator with 1 HP capacity for heavy-duty applications.a. Description: Two High Cycle High Temperature 1/2 HP motors with Class H

High Temperature Insulation and a heavy-duty transmission, designed for large, heavy wrought-iron gates.

b. Pulling Torque: 210 pounds (95.2 kg) of pulling torque.c. Maximum Gate Weight: 2,000 pounds (907.2 kg).d. Maximum Gate Length: 37 feet (11.3 m).e. Recommended Cycles/Hour: Continuous duty.

3. Warranty: 5 years for commercial applications, 7 years for residential applications.4. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247









c. 8 Monitored edges available when Transceiver is added.6. Electrical Power Requirements: 115V, single phase.

a. Accessory Electrical Power Requirements: 24V DC 500 mA output, switched or unswitched power.

7. Wormgear Reduction: Commercial oil bath gearboxes, 30:1 wormgear reduction.8. Gate Traveling Speed: 12 inches (305 mm) per second.9. Chassis: Constructed with 1/4-inch (6 mm) sanded, welded and gold zinc-plated sheet

metal.10. Finishing: Metal parts are gold zinc-plated for rustproof protection.11. Cover: High-density UV-resistant polyethylene material.12. Internet Connectivity: MyQ Technology.

a. 902 to 928 MHz

32 31 00-22

b. 50-channel FHSS (Frequency Hopping Spread Spectrum).c. LiftMaster 828LM Internet Gateway enables monitoring and control of gate




b. Transmits 310 MHz, 315MHz, 390 MHz14. Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate

when closing or stops/reverses the gate when opening.15. Lockable External Manual Disconnect: Allows gate to be opened in the event of a

power loss without removing the operator cover. Connect to optional Fire Department Box to meet local fire code.


without having to run a communication wire.b. Support for through-beam photo eye in the wireless dual-gate setup. Can


17. Bi-Part Delay: Selectable feature for dual-gate applications. Dial provides manual adjustment to control delay as necessary to ensure primary gate closes last, avoiding potential damage to the gate.





tandem with a barrier gate.23. Surge/Lightning Protection: Industrial surge protection on high and low voltage inputs.

Protects against lightning strikes at a 50-foot (15.2 m) radius.24. Plug-in loop detector inputs: Programmed inputs for shadow, interrupt and exit.25. External Alarm Reset Button: Allows for quick reset of the gate operator when the


pre-operation warning; provides 3-second warning prior to and during gate movement.27. Mechanical Limit System: Maintains accurate gate position throughout gate travel,

even after using manual disconnect.28. Operating Temperature Range:

a. Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).b. With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60





operation.

32 31 00-23

30. Accessories: Safety Monitoring Devices:a. Monitored Photo Eyes and Wireless Edge Kits.

1) LiftMaster LMRRU Reflective Photo Eyes.2) LiftMaster LMTBU Thru-Beam Photo Eyes.3) LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and





Readern. LiftMaster HTRNB Heater Kito. LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat treated

wheels.

J. Gate Operators: LiftMaster SL595 Industrial Gear-Driven Slide Gate Operator.1. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247








Close).

32 31 00-24

2) 1 Monitored Photo Eye input (selectable for Open or Close).c. 8 Monitored edges available when Transceiver is added.

3. Warranty: 2 years.4. Operator Speed: 12 inches (305 mm) per second.5. Electrical Power Requirements:

a. 115/208/230V AC, single phase, 60 Hz.b. 208/230/460/575V AC, 3-phase, 60 Hz.

6. Accessory Electrical Power Requirements: 24V AC.a. Main Board: 12V AC, maximum 500mA.b. Terminal Strip:

1) 2.2A maximum for 115/208-230V AC, single phase.2) 2.2A maximum for 208/230-460 V AC, three phase3) 1.3A maximum for 575V AC, three phase

7. Gear Reduction: 20:1 wormgear reducer in synthetic oil bath.8. Motor: Switchless 1 HP, continuous duty

a. Capacity: Supports gate lengths up to 70 feet (21.5 m) and gate weights up to 1,700 pounds(71 kg).

b. Recommended Cycles per Hour: 25.9. Motor: Switchless 1 1/2HP, continuous duty (115/230V, single phase only).

a. Capacity: Supports gate lengths up to 80 feet (24.4 m) and gate weights up to 2,100 pounds (953 kg).

b. Recommended Cycles per Hour: 25.10. Motor: Switchless 2 HP, continuous duty (208/230/460/575V, 3- phase only).

a. Capacity: Supports gate lengths up to 80 feet (27.4 m) and gate weights up to 2,500 pounds (1134 kg).

b. Recommended Cycles per Hour: 25.11. Metal Frame: 7 gauge pre-galvanized steel.12. Chassis: Powder-coated galvanized steel.13. Enclosure: NEMA 3R enclosure; oil-tight, weatherproof NEMA 3R cabinet, lockable.14. Chain: #50 nickel-plated, 25 feet (7620 mm) supplied with each unit.15. Gearbox: All-weather.16. Internet Connectivity: MyQ Technology.





b. Transmits 310 MHz, 315MHz, 390 MHz18. Inherent Reversing Sensor: Utilizes Current Sense and RPM Sensor to detect

obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.

19. Lockout/Tagout: Prevents power from being switched on when servicing operator. Safeguards workers from high voltage power.





inputs.

32 31 00-25

23. Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.a. Pre-warning or gate-in motion sounderb. Switch on/off devices at open or Close Limits or while gate is in motion.c. Tamper detection if gate is pushed off Close Limitd. Cycle quantity feedback.e. Red/Green Light to control gate traffic.


tandem with a barrier gate.26. Surge/Lightning Protection: Industrial Surge Protection on high and low voltage inputs.

Protects against lightning strikes at a 50-foot (15.2m) radius.27. Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.28. External Alarm Reset Button: Allows for quick reset of the gate operator when the


pre-operation warning; provides a 3-second warning prior to and during gate movement.

30. Maximum Run Timer: Protects against damage to the gate and operator by limiting the unit's runt time to 120 seconds.

31. Lockable External Manual Disconnect: Allows gate to be opened in the event of a power loss without removing the operator cover.

32. Mechanical Braking: the mechanical braking system adds substantial gate position control at all points in travel. The solenoid-actuated b rake system also prevents the gate from being back-driven

33. Friction Clutch: Adjustable friction clutch helps protect gate and operator from damage should the gate meet an obstruction.

34. Limit Settings: Driven limit nut switches are fully adjustable to provide precision, accuracy and reliability.

35. Operating Temperature Range:a. Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).b. With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60









32 31 00-26



Readern. LiftMaster HTRNB Heater Kito. LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat-treated

wheels

K. Gate Operators: LiftMaster SL585 Industrial Gear-Driven Slide Gate Operator.1. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247









c. 8 Monitored edges available when Transceiver is added.3. Warranty: 2 years.4. Operator Speed: 11 inches (279.4 mm) per second.5. Electrical Power Requirements:

a. 115/208/230V AC, single phase, 60 Hz.b. 208/230/460/575V AC, 3-phase, 60 Hz.

6. Accessory Electrical Power Requirements: 24V AC.a. Main Board: 12V AC, maximum 500mA.b. Terminal Strip:

1) 2.2A maximum for 115/208-230V AC, single phase.2) 2.2A maximum for 208/230-460 V AC, three phase3) 1.3A maximum for 575V AC, three phase

7. Gear Reduction: 20:1 wormgear reducer in synthetic oil bath.8. Motor: Switchless 1/2 HP, continuous duty

a. Capacity: Supports gate lengths up to 45 feet (13 m) and gate weights up to

32 31 00-27

1,000 pounds(454 kg).b. Recommended Cycles per Hour: 20.

9. Motor: Switchless 1 HP, continuous duty.a. Capacity: Supports gate lengths up to 70 feet (21 m) and gate weights up to

1,600 pounds (725 kg).b. Recommended Cycles per Hour: 20.

10. Motor: Switchless 1 1/2 HP, continuous duty (115/230V, single phase only).a. Capacity: Supports gate lengths up to 75 feet (23 m) and gate weights up to

1,900 pounds (862 kg).b. Recommended Cycles per Hour: 20.

11. Metal Frame: 7 gauge pre-galvanized steel.12. Chassis: Powder-coated galvanized steel.13. Enclosure: Weather-resistant, lockable, 16-gauge steel cover.14. Chain: #50 nickel-plated, 25 feet (7620 mm) supplied with each unit.15. Gearbox: All-weather.16. Internet Connectivity: MyQ Technology.





b. Transmits 310 MHz, 315MHz, 390 MHz18. Inherent Reversing Sensor: Utilizes Current Sense and RPM Sensor to detect

obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.

19. Lockout/Tagout: Prevents power from being switched on when servicing operator. Safeguards workers from high voltage power.








tandem with a barrier gate.26. Surge/Lightning Protection: Industrial Surge Protection on high and low voltage inputs.

Protects against lightning strikes at a 50-foot (15.2m) radius.27. Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.28. External Alarm Reset Button: Allows for quick reset of the gate operator when the


pre-operation warning; provides a 3-second warning prior to and during gate

32 31 00-28

movement.30. Maximum Run Timer: Protects against damage to the gate and operator by limiting

the unit's runt time to 120 seconds.31. Lockable External Manual Disconnect: Allows gate to be opened in the event of a

power loss without removing the operator cover.32. Mechanical Braking: the mechanical braking system adds substantial gate position

control at all points in travel. The solenoid-actuated b rake system also prevents the gate from being back-driven

33. Friction Clutch: Adjustable friction clutch helps protect gate and operator from damage should the gate meet an obstruction.

34. Limit Settings: Driven limit nut switches are fully adjustable to provide precision, accuracy and reliability.

35. Universal Footprint: Easily adapts operator to common footprints. Simplifies retrofit applications by adapting to pre-existing pads for Link, Stanley or LiftMaster operators.

36. Operating Temperature Range:a. Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).b. With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60










Telephone Entry System.i. LiftMaster Star1000 Commercial Access Control Receiverj. LiftMaster PPWR Passport Receiver with Security+ 2.0 Technologyk. LiftMaster PPV1 Passport 1-Button Remotel. LiftMaster PPK1 Passport 1-Button Mini Remote

32 31 00-29

m. LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader

n. LiftMaster HTRNB Heater Kito. LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat-treated

wheels.

L. Gate Operators: LiftMaster MA Series High-Performance Commercial Barrier Gate Operators with Built-in Battery Backup.1. LiftMaster MA Mega Arm Barrier Gate Operators with plastic cover.2. LiftMaster MAT Mega Arm Barrier Gate Operators with aluminum cover.3. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247

standards.a. This model is intended for use in Class I, II, III and IV vehicular barrier gate

applications.4. Warranty: 2 years for operator, 10 years for operator frame.5. Operation:

a. Soft start/stop.b. Universal Controller: 8 inputs right or left-handed operation safety-stop.c. Anti-tailgate, quick-close features.d. Selectable Auto Open: 15 seconds after power failure or upon battery depletion

barrier arm can be set to automatically open. 15-second delay helps reduce nuisance callbacks due to short power interruptions or brownouts.

6. Operator Speed: Open or close speed of 2.5 seconds.7. Gate Arm: Breakaway arm; held in place with breakaway retaining nuts. If arm is hit, it

will break away and can be re-installed; can be set up for right or left-hand mount.8. Gate Arm: Arm one, articulating arm for low headroom environments.9. Gate Arm: Arm two, yellow.10. Gate Arm: Arm three, red/white retro-reflectorized DOT tape.

a. Gate Arm Length: 12 feet (3658 mm).b. Gate Arm Length: 17 feet (5182 mm).

11. Gate Arms: Arm four, yellow padded arm, 12 feet (3658 mm) and 14 feet (4267 mm) long.

12. Motor: 1/2 HP, 24V DC, 800 RPM motor, 6,000 cycles per day.13. Electrical Power Requirements: 120/220V AC.14. Accessory Electrical Power Requirements: 24V DC 500 mA Battery Backup for

accessory power.15. Gear Reduction: 60:1 reducer in synthetic oil bath.16. Chassis: Powder-coated 1/4-inch (6 mm) aluminum alloy.17. Drive System: No. 80 gearbox.18. Built-in Receiver: Single remote control solution for gate access and additional access

points. Ability to add up to 50 remote control.19. Magnetic Limit Sensors: Designed for high-cycle applications, contain no moving parts

to wear out, provide reliable operation.20. Surge Protection: Built-in at point of incoming line voltage from power spikes, surges.21. Auxiliary Outlet: Powers accessories devices.22. Battery Backup: Provides operation during power outages to maintain traffic flow.23. Automatically resets to normal operation when power is restored; provides up to 900

full cycles with a 12 foot (3658 mm) arm.24. Accessories: Provide the optional accessories listed below.

a. Clutch: Allows arm to be manually pushed open. Arm automatically resets to normal closed position upon receiving activation. Ideal for areas that are concerned with vandals damaging arm.

b. LiftMaster EL2000 Commercial and Gated Community Telephone Entry System.

c. LiftMaster STAR1000 Commercial Access Control Receiver.d. LiftMaster 811LM 1-Button Encrypted DIP Remote Control.

32 31 00-30

e. LiftMaster 813LM 3-Button Encrypted DIP Remote Control.f. LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology.

1) LiftMaster PPV1 Passport 1-Button Remote.2) LiftMaster PPK1 Passport 1-Button Mini Remote.

g. LiftMaster KPR2000 Single Access Control Keypad and Proximity Reader.h. LiftMaster LD7LP Low-Power Loop Detector.i. LiftMaster 361LM 1-Button Remote Control.j. LiftMaster 363LM 3-Button Remote Control.

M. Gate Operators: LiftMaster MAS Series High-Speed Commercial Barrier Gate Operators with Built-in Battery Backup.1. LiftMaster MAS Mega Arm Barrier Gate Operators with plastic cover.2. LiftMaster MAST Mega Arm Barrier Gate Operators with aluminum cover.3. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247


applications.4. Warranty: 2 years.5. Operation:

a. Soft start/stop.b. Universal Controller: 8 inputs right or left-handed operation safety-stop.c. Anti-tailgate, quick-close features.d. Selectable Auto Open: 15 seconds after power failure or upon battery depletion

barrier arm can be set to automatically open. 15-second delay helps reduce nuisance callbacks due to short power interruptions or brownouts.

6. Operator Speed: Open or close speed of 0.9 second.7. Gate Arm: Breakaway arm; held in place with breakaway retaining nuts. If arm is hit, it

will break away and can be re-installed; can be set up for right or left-hand mount.8. Gate Arm: Length 8 feet (2438 mm) long, yellow padded arm.9. Motor: 1/2 HP, 24V DC, 800 RPM motor, 10,000 cycles per day.10. Electrical Power Requirements: 120/220V AC.11. Accessory Electrical Power Requirements: 24V DC 500 mA Battery Backup for

accessory power.12. Gear Reduction: 60:1 wormgear reduction in synthetic oil bath.13. Chassis: Powder-coated 1/4-inch (6.35 mm) T-6 aluminum alloy.14. Drive System: No. 80 gearbox.15. Built-in Receiver: Single remote control solution for gate access and additional access

points. Ability to add up to 50 remote controls.16. Magnetic Limit Sensors: Designed for high-cycle applications, contain no moving parts

to wear out, provide reliable operation.17. Surge Protection: Built-in at point of incoming line voltage from power spikes, surges.18. Auxiliary Outlet: Powers accessories devices.19. Battery Backup: Provides operation during power outages to maintain traffic flow.

Automatically resets to normal operation when power is restored; provides up to 900 full cycles with a 12 foot (3658 mm) arm.

20. Accessories: Provide the optional accessories listed below.a. Clutch: Allows arm to be manually pushed open. Arm automatically resets to

normal closed position upon receiving activation. Ideal for areas that are concerned with vandals damaging arm.

b. LiftMaster EL2000 Commercial and Gated Community Telephone Entry System.

c. LiftMaster STAR1000 Commercial Access Control Receiver.d. LiftMaster 811LM 1-Button Encrypted DIP Remote Control.e. LiftMaster 813LM 3-Button Encrypted DIP Remote Control.f. LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology.

1) LiftMaster PPV1 Passport 1-Button Remote.

32 31 00-31

2) LiftMaster PPK1 Passport 1-Button Mini Remote.g. LiftMaster KPR2000 Single Access Control Keypad and Proximity Reader.h. LiftMaster LD7LP Low-Power Loop Detector.i. LiftMaster 361LM 1-ButtonRemote Control.j. LiftMaster 363LM 3-Button Remote Control.

N. Gate Operators: LiftMaster BG770 Industrial Barrier Gate Operator.1. Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247


applications.2. Warranty: 2 years.3. Operator Speed: 90-degrees in 4 seconds.4. Gate Arms: Standard, 12 foot (3658 mm) wood arms.5. Gate Arms: Provide optional 10-foot (3048 mm) PVC arms.6. Gate Arms: Provide optional 15-foot (4572 mm) aluminum arms, square, yellow and

black stripes.7. Electrical Power Requirements: 115/208/230V AC, single phase, 60 Hz.

a. Accessory Electrical Power Requirements: One, 115V AC.b. Accessory Electrical Power Requirements: One, 24V AC.

8. Electrical Power Requirements: 208/230/460/575V AC, 3-phase, 60 Hz.a. Accessory Electrical Power Requirements: One, 24V AC.

9. Gear Reduction: 60:1 wormgear reduction in oil bath.10. Motor: 1/2 HP, continuous duty.11. Metal Frame: 11-gauge pre-galvanized steel.12. Enclosure: Powder-coated weather-resistant steel enclosure.13. Configuration: Standard.14. Configuration: Reverse cabinet modification: In the event of an obstruction close by

the barrier gate the cabinet can be reversed to allow access to cabinet door.15. Control Inputs: Control inputs allow the connection of optional external devices like

loop detectors, photo eyes, telephone entry systems, access control systems and radio receivers.

16. Limit Settings: Driven limit cams are fully adjustable.17. Accessories: Provide the optional accessories listed below.

a. SAMS Limit Switch Modification: Compatible with sequenced access management systems, as a single or pair; compatible with systems with a GL control board.

b. Dual-Gate Capability: Supports the operation of 2 separate gate operators in unison at a single entrance, assuring consistent, simultaneous open/close cycle for both operators and is bi-part capable.

c. Timer-to-Close: Programmable module can be set from 1 to 1,024 seconds. The unit will automatically close when programmed time has expired.

d. Plug-in Style Loop Detectors: Operator incorporates 2-harness support system that can accept up to 2 plug-in loop detectors for exit or hold-open functions.

e. Long-Distance Wiring Module: Allows mounting accessories or controls beyond 100 feet (30 m) from the operator.

f. Flex Red Light Strip: 10 feet (3048 mm) long.g. Thermostatically Controlled Heater: For use in extreme cold environments.h. Single-Button Radio Modification: Enables radio control to both open and close

the barrier arm.

O. Gate Operators: LiftMaster BG790 Industrial Barrier Gate Operator.1. Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247


applications.

32 31 00-32

2. Warranty: 2 years.3. Operator Speed: 11 seconds opening time.4. Electrical Power Requirements: 115/208/230V AC, single phase, 60 Hz.

a. Accessory Electrical Power Requirements: One, 115V AC.b. Accessory Electrical Power Requirements: One, 24V AC.

5. Electrical Power Requirements: 208/230/460/575V AC, 3-phase, 60 Hz.a. Accessory Electrical Power Requirements: One, 24V AC.

6. Gear Reduction: 60:1 wormgear reducer in oil bath.7. Motor: 1/2 HP, continuous duty.8. Metal Frame: 11-gauge pre-galvanized steel.9. Gate Arms: Includes 24-foot (7315 mm) wishbone arm with black and white stripes

and 2 counterweights.10. Enclosure: Powder-coated weather-resistant steel enclosure.11. Configuration: Standard.12. Configuration: Reverse cabinet modification: In the event of an obstruction close by

the barrier gate the cabinet can be reversed to allow access to cabinet door.13. Control Inputs: Control inputs allow the connection of optional external devices like

loop detectors, photo eyes, telephone entry systems, access control systems and radio receivers.

14. Limit Settings: Driven limit cams are fully adjustable.15. Accessories: Provide the optional accessories listed below.

a. Dual-Gate Capability: Supports the operation of 2 separate gate operators in unison at a single entrance, assuring consistent, simultaneous open/close cycle for both operators and is bi-part capable.

b. Timer-to-Close: Programmable module can be set from 1 second to 17 minutes. The unit will automatically close when programmed time has expired.

c. Plug-in Style Loop Detectors: Operator incorporates 2-harness support system that can accept up to 2 plug-in loop detectors for exit or hold-open functions.

d. Long-Distance Wiring Module: Allows mounting accessories or controls beyond 100 feet (30 m) from the operator.

e. Flex Red Light Strip: 10 feet (3048 mm) long.f. Thermostatically Controlled Heater: For use in extreme cold environments.g. Single-Button Radio Modification: Enables radio control to both open and close

the barrier arm.

P. Gate Operators: LiftMaster HCTDCU Series Heavy-Duty, High-Cycle Trolley Overhead Door/Gate Operators.1. LiftMaster HCTDCU Overhead Door and Gate Operator

a. HCTDCPKGU08 - 8 feet (2438 mm) door/gateb. HCTDCPKGU10 - 10 feet (3048 mm) door/gatec. HCTDCPKGU12 - 12 feet (3658 mm) door/gate

2. Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.a. This model is intended for use in Class II, III and IV vehicular gate applications.b. To be UL 325 compliant, two independent safety entrapment protection devices





32 31 00-33





5. Motor: 24 DC, with soft start/stop operation.a. Duty cycle: Continuous

6. Capacity:a. HCTDCPKGU08 - 8 feet (2438 mm) overhead door or gate up to 700 pounds

(318 kg)b. HCTDCPKGU10 - 10 feet (3048 mm) overhead door or gate up to 700 pounds

(318 kg)c. HCTDCPKFU12 - 12 feet (3658 mm) overhead door or gate up to 700 pounds

(318 kg)7. Recommended Cycles per Day: Continuous8. Gate/Door Travel Speed: Selectable; Standard Open - up to 8 inches (305 mm) per

second; Fast Open - up to 11 inches (279 mm) per second; Fast Close - up to 8 inches (305 mm) per second.

9. Warranty: 5 years for commercial applications.10. Wormgear Reduction: Commercial oil bath gearbox with 28:1 ratio wormgear

reduction running in synthetic oil bath.11. Battery Backup: Power Management system draws 14.8 mA when gate or door is idle

with remote controls programmed. Provides 112 cycles on Battery Backup with two 7Ah batteries.

12. Standby Time: Proves up to 72 days of standby power in the event of a power loss with two 7Ah batteries (excluding accessories).

13. Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.

14. Dynamic Braking System: Adds substantial gate position control at all points in travel. The brake system also prevents the gate or door from being back-driven.

15. Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.16. Trolley Assembly: Heavy-duty 12-gauge steel track with 6 UHMW rollers17. Noise Isolators: Designed for exceptionally quiet performance.18. Internet Connectivity: MyQ Technology




a. Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls, HomeLink compatible

b. HomeLink compatible, version 4 and higherc. Transmits 310 MHz, 315 MHz, 390 MHz.

20. Electronic limits: Maintains accurate limit position throughout travel, even after using the manual release handle.




32 31 00-34


25. Quick Close, Anti-Tailgate: Closes the gate immediately after a vehicle pulls off of interrupt loop.

26. Sequenced Access Management: Capable of sequentially controlling the operator in tandem with barrier gate.

27. Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.28. Alarm Reset Button: Instantly resets the built-in safety alarm siren.29. Fire Department Compliant: Selectable settings allow gate or door to auto open and

power failure or battery depletion.30. Surge Suppression: Industrial strength on high and low voltage outputs.31. Keyed Manual Disconnect: Simple-to-use disconnect allows gate or door to be

operated manually and maintain limit position once re-engaged.32. Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60






a. Monitored Photo Eyes and Wireless Edge Kits.1) LiftMaster LMRRU Reflective Photo Eyes.2) LiftMaster CPSUN4G Thru-Beam Photo Eyes.3) LiftMaster LMTBU Thru-Beam Photo Eyes.4) LiftMaster CPS-OPEN4 Monitored Dual Sided Photo Eye5) LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and


b. Wired Monitored Edges (can be used with LMWEKITU)1) LiftMaster S50 Small Profile Monitored Edge

a) LiftMaster S504AL Small Profile Edge, 4 foot (1219 mm) aluminum channel

b) LiftMaster S505AL Small Profile Edge, 5 foot (1524 mm) aluminum channel

c) LiftMaster S506AL Small Profile Edge, 6 foot (1829 mm) aluminum channel

2) LiftMaster L50 Large Profile Monitored Edgea) LiftMaster L504AL Large Profile Edge, 4 foot (1219 mm) aluminum

channelb) LiftMaster L505AL Large Profile Edge, 5 foot (1524 mm) aluminum

channelc) LiftMaster L506AL Large Profile Edge, 6 foot (1829 mm) aluminum

channel3) LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge4) LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge5) LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge6) LiftMaster WR4 Wrap-Around 4 foot (1219 mm) round monitored edge7) LiftMaster WR5 Wrap-Around 5 foot (1524 mm) round monitored edge8) LiftMaster WR6 Wrap-Around 6 foot (1829 mm) round monitored edge

32 31 00-35

c. Optical Edges for Overhead Doors1) LiftMaster OES-SD16; 16' Sectional Door Edge Kit2) LiftMaster OES-SD24; 24' Sectional Door Edge Kit3) LiftMaster OES5104; 2" x 2" PVC Channel

35. Accessories: Provide the optional accessories listed below.a. LiftMaster LOOPDETLM Plug-in Loop Detectorb. LiftMaster KPW250 Wireless Commercial Keypadc. LiftMaster RGL24LY Red/Green Traffic Lightd. LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control.e. LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control.f. LiftMaster 811LM 1-button Encrypted DIP Remote Control.g. LiftMaster 813LM 3-Button Encrypted DIP Remote Control.h. LiftMaster IPAC Internet Protocol Access Control Entry System.i. LiftMaster IPACIPDCC IPAC 2 Door IPDC - Cloudj. LiftMaster EL2000SS Stainless Steel Commercial and Gated Community

Telephone Entry Systemk. LiftMaster Star1000 Commercial Access Control Receiverl. LiftMaster PPWR Passport Receiver with Security+ 2.0 Technologym. LiftMaster PPV1 Passport 1-Button Remoten. LiftMaster PPK1 Passport 1-Button Mini Remoteo. LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity

Reader

Q. LiftMaster LMRRU Monitored Retro-Reflective Photo Eye.1. LiftMaster LMRRU Monitored Retro Reflective Photo Eye: Photo eye assembly, with 6

foot (1829 mm) cable, photo eye bracket, photo eye hood, square reflector, reflector hood, reflector bracket, mounting hardware.

2. Compliance:a. Meets UL 325 requirements for gates as secondary entrapment protection.b. Enclosure: NEMA 4X waterproof and corrosion-resistant enclosure.

3. Installation Design:a. Single-sided, does not require trenching.b. Alignment: LED indicator with visible feedback and adjustable photo eye

assembly.4. Photo Eye Beam: Polarized beam technology sends and receives beam through 2

polarized filters to avoid interference from shiny objects.5. Sensing Distance: 50 feet (15 m).6. Operating Temperature Range: -40 degrees F (-40 degrees C) to 149 degrees F (65

degrees C).7. Power: LiftMaster 2-wire photo eye interface.8. Operating Current: Greater than or equal to 40 mA.9. Output Versions: Monitored 2-wire.10. Response time: 35 milliseconds.11. Wake-up Delay: 500 milliseconds.12. Connection: 6 foot (1829 mm) cable, fine stranded with crimp terminals wire size 18

gauge.

R. LiftMaster LMTBU Monitored Through Beam Photo Eye.1. LiftMaster LMTBU Monitored Through Beam Photo Eye: Photo eye emitter, photo eye

receiver each with 6 foot (1829 mm) cable, 2X photo eye bracket, 2X photo eye hood, mounting hardware.

2. Compliance:a. Meets UL 325 requirements for gates as secondary entrapment protection.b. Enclosure: NEMA 4X waterproof and corrosion-resistant enclosure.

3. Installation Design:a. Dual-sided, if used in dual gate applications. Operator wireless communication

32 31 00-36

can be used to avoid trenching.b. Alignment: LED indicator with visible feedback and adjustable photo eye

assembly.4. Photo Eye Beam: Polarized beam technology sends and receives beam through 2

polarized filters to avoid interference from shiny objects.5. Sensing Distance: 90 feet (27 m).6. Operating Temperature Range: -40 degrees F (-40 degrees C) to 149 degrees F (65

degrees C).7. Power: LiftMaster 2-wire photo eye interface.8. Operating Current: Greater than or equal to 40 mA.9. Output Versions: Monitored 2-wire.10. Response time: 35 milliseconds.11. Wake-up Delay: 500 milliseconds.12. Connection: 6 foot (1829 mm) cable, fine stranded with crimp terminals wire size 18

gauge.

PART 3 EXECUTION

3.1 EXAMINATION AND PREPARATION

A. Inspect and prepare substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions.

B. Do not proceed with installation until substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.

C. If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.

3.2 INSTALLATION

A. Install in accordance with manufacturer's instructions. Test for proper operation and adjust until satisfactory results are obtained.

3.3 PROTECTION

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

32 31 00-37

arcat | free building product cad details, bim, …€¦ · web viewliftmaster 823lm remote light...

Documents