aqua classic reverse osmosis drinking water systems · the aqua classic reverse osmosis systems are...
TRANSCRIPT
You and your family deserve the very best water
possible. With the ever growing problem of
water pollution, pharmaceuticals, farm runoff and
chemicals, naturally pure water is becoming
almost non-existant. You will enjoy sparkling
clear, fresh tasting
and odorless
water with an
Aqua Classic
Reverse Osmosis
Drinking Water
System from...
Aqua Classic Reverse Osmosis Drinking Water Systems
Aqua Classic
w/ECF ModuleOptional ECF Module (Extended Contact Carbon Adsorption Filter)
The Aqua Classic Reverse Osmosis System is simple to operate and requires no electricity*. It works by forcing ordinary tap water (using household water pressure) through a semi-permeable membrane which removes up to 99% of harmful water contaminants such as taste, odor, VOCs, fluoride, as well as toxic levels of arsenic, lead, nitrates, heavy metals & much more. These impurities are flushed down the drain leaving you with cleaner fresher tasting water.
System Features• High quality, replaceable membrane for high rejection rates• Pressurized 3.2 gallon storage tank• Equipped with automatic shut-off valve to stop water flow and eliminate
waste when the tank is full• Chrome long reach faucet • Optional booster pump or permeate pump models available for
higher rejection & production rates, also helps where low household pressure is present
• NSF certified 5 micron sediment pre-filter and NSF certified carbon block post-filter
Aqua Classic II
w/ECF ModuleOptional ECF Module (Extended Contact Carbon Adsorption Filter)
Supply your refrigerator water dispenser and ice maker to
produce crystal-clear ice cubes.
A variety of optional faucet styles and colors are available to match just about any decor!
w/Permeate Pump
w/Booster Pump*
The Aqua Classic Reverse Osmosis Systems are traditional in design with blue filter housings and a blue steel tank.
The Aqua Classic II for municipal water systems feature an additional 5-micron GAC carbon pre-filter to remove any chlorine that may be present to protect the system membrane.
* Booster Pump models require 120v power source, Permeate Pump systems operate under water pressure.
Tested and certified by NSF International against NSF/ANSI Standard 42 for material requirements only.
© Nelsen Corporation, Part# AC-LIT