aqa a-level physics - pmt
TRANSCRIPT
![Page 1: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/1.jpg)
https://bit.ly/pmt-edu-cc https://bit.ly/pmt-cc
AQA A-Level Physics11.2 Thermodynamics and engines
Flashcards
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
This work by PMT Education is licensed under CC BY-NC-ND 4.0
![Page 2: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/2.jpg)
What is the first law of thermodynamics?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 3: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/3.jpg)
What is the first law of thermodynamics?
Conservation of energy in systems when cooling, heating and doing work.
Q = ΔU + W
Q = Energy transferred by heating U = Internal energy W = Work done by system
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 4: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/4.jpg)
A gas is compressed due to work being done on it, W is therefore positive. True
or False?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 5: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/5.jpg)
A gas is compressed due to work being done on it, W is therefore positive. True or False?
False, work is done on a gas hence W is negative.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 6: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/6.jpg)
If a gas is cooled, Q is negative. True or False?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 7: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/7.jpg)
If a gas is cooled, Q is negative. True or False?
True, energy is removed hence Q is negative.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 8: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/8.jpg)
What assumptions are necessary when applying the 1st law to a closed
(non-flow) system?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 9: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/9.jpg)
What assumptions are necessary when applying the 1st law to a closed (non-flow) system?That the gas is an ideal gas so the internal energy is only dependent on temperature, work done causes a change in volume and the ideal gas law (pV = nRT) can be applied where n and R will both be constant.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 10: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/10.jpg)
What is an isothermal change?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 11: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/11.jpg)
What is an isothermal change?
A change that occurs at a constant temperature. This means internal energy stays constant so Q = W, meaning any transfer of energy would lead to work being done and vice versa. It obeys Boyle’s Law: PV = constant
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 12: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/12.jpg)
How do you calculate the work done on a isothermal change p-V diagram?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 13: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/13.jpg)
How do you calculate the work done on a isothermal change p-V diagram?
The work done is the area under the graph, between the two points.
Image: AQA
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 14: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/14.jpg)
What is an adiabatic change?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 15: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/15.jpg)
What is an adiabatic change?
A change in which no heat passes in or out. Q = 0 and W = -ΔU. If work is done by the system, W is positive and the internal energy will decrease.
Obeys pVˠ = constant (where ˠ is the adiabatic constant that depends on the type of gas)
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 16: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/16.jpg)
How can you calculate the work done on a p-V diagram for adiabatic changes?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 17: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/17.jpg)
How can you calculate the work done on a p-V diagram for adiabatic changes?
The work done is the area under the pressure volume graph. Image: AQA
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 18: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/18.jpg)
What is a constant pressure change?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 19: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/19.jpg)
What is a constant pressure change?
If a gas is kept at a constant pressure, it will increase in volume when heated.
W = pΔV
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 20: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/20.jpg)
How do you calculate the work done from a constant pressure change p-V
diagram?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 21: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/21.jpg)
How do you calculate the work done from a constant pressure change p-V diagram?
The work done is the area under the graph.
Image: AQA
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 22: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/22.jpg)
What is a constant volume change?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 23: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/23.jpg)
What is a constant volume change?
When heating gas in an enclosed space, volume stays constant. This leads to an increase in pressure, temperature and internal energy. W = 0 so Q = ΔU. All the heat energy is transferred into internal energy.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 24: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/24.jpg)
Draw a constant volume change for heating on a p-V diagram
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 25: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/25.jpg)
Draw a constant volume change for heating on a p-V diagram
volume
pres
sure
No work is done as the volume doesn’t change, the arrow points upwards as temperature has increased.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 26: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/26.jpg)
In a cyclic process, the work done per cycle on a graph is the...
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 27: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/27.jpg)
In a cyclic process, the work done per cycle on a graph is the...
Area of the loop.
(the difference between the work done by the system and work done on the system).
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 28: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/28.jpg)
What are indicator diagrams?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 29: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/29.jpg)
What are indicator diagrams?
A p-V diagram for engines that allows identification of the different processes in the system.
It may vary depending on speed, timing and load.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 30: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/30.jpg)
What are the key stages of induction in the four stroke petrol engine cycle?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 31: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/31.jpg)
What are the key stages of induction in the four stroke petrol engine cycle?
● The piston moves down the cylinder increasing the volume of gas above it.
● Air and petrol vapour are drawn into the cylinder through the open inlet valve.
● Pressure stays constant, volume increases.https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 32: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/32.jpg)
Draw the indicator diagram for induction.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 33: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/33.jpg)
Draw the indicator diagram for induction.
P
V
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 34: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/34.jpg)
What are the key stages of compression in the four stroke petrol engine cycle?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 35: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/35.jpg)
What are the key stages of compression in the four stroke petrol engine cycle?● The valves are closed.● Piston moves back up cylinder, volume decreases, pressure
increases (work is done).● Near the end of the stroke, the spark plug ignites air/fuel mix
causing an increase in temperature and pressure. Minimal volume change.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 36: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/36.jpg)
Draw the indicator diagram for compression.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 37: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/37.jpg)
Draw the indicator diagram for compression.
P
V
spark
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 38: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/38.jpg)
What are the key stages of expansion in the four stroke petrol engine cycle?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 39: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/39.jpg)
What are the key stages of expansion in the four stroke petrol engine cycle?● Valves are closed, expanded ignited gas moves
piston down.● Work done by the expanding gas is more than the
work done to compress the gas, net output of work.● Near the end of the stroke, the exhaust valve opens
to reduce pressure to near atmospheric.https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 40: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/40.jpg)
Draw the indicator diagram for expansion.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 41: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/41.jpg)
Draw the indicator diagram for expansion.
P
V
The pink line shows expansion, the other lines are the previous stages.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 42: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/42.jpg)
What are the key stages of the exhaust stroke in the four stroke petrol engine
cycle?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 43: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/43.jpg)
What are the key points of the Exhaust stage in the four stroke petrol engine cycle?
● The piston moves back up, getting rid of the burnt air through the exhaust.
● Pressure just above atmospheric.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 44: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/44.jpg)
Draw the indicator diagram for the exhaust stroke
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 45: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/45.jpg)
Draw the indicator diagram for the exhaust stroke
P
V
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 46: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/46.jpg)
What assumptions are made for theoretical indicator diagrams of diesel
and petrol engines?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 47: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/47.jpg)
What assumptions are made for theoretical indicator diagrams of both diesel and petrol engines?● Pure air is continuously cycled.● Pressure and temperature changes can
be instant. ● The heat source is external.● The engine is frictionless.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 48: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/48.jpg)
What 4 processes make up the theoretical cycle of a 4 stroke petrol
engine?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 49: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/49.jpg)
What 4 processes make up the theoretical cycle of a 4 stroke petrol engine?
1. The gas is adiabatically compressed so no heat is transferred.
2. Volume stays constant as heat is supplied.3. Gas cools adiabatically.4. System cools at constant volume.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 50: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/50.jpg)
What 4 processes make up the theoretical cycle of a 4 stroke diesel
engine?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 51: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/51.jpg)
What 4 processes make up the theoretical cycle of a 4 stroke diesel engine?
1. Gas is adiabatically compressed.2. Heat is supplied, pressure stays constant.3. Gas cools adiabatically.4. System cools at constant volume.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 52: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/52.jpg)
Describe the difference between the theoretical and real four-stroke petrol
engine cycle on a p-v graph.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 53: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/53.jpg)
Draw the difference between the theoretical and real four-stroke petrol engine cycle on an indicator diagram.
Image: AQA
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 54: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/54.jpg)
Describe a four stroke diesel engine cycle induction stroke.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 55: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/55.jpg)
Describe a four stroke diesel engine cycle induction stroke.
- Inlet valve opens. - Air is drawn into cylinder (no fuel).- Volume increases, pressure stays
constant.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 56: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/56.jpg)
Describe a four stroke diesel engine cycle compression stroke.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 57: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/57.jpg)
Describe a four stroke diesel engine cycle compression stroke.- Inlet valve closed. - Piston moves in, air is compressed. - Temperature increases, air becomes hot
enough to ignite fuel. - Diesel is sprayed into cylinder and ignites.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 58: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/58.jpg)
Describe a four stroke diesel engine cycle expansion and exhaust stroke .
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 59: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/59.jpg)
Describe a four stroke diesel engine cycle expansion and exhaust stroke.● Gas expands, moving the piston down.● Net output of work.● Exhaust valve opens and removes heat
and burnt gas.● Piston moves in, expelling more gas.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 60: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/60.jpg)
What is the difference between petrol and diesel engine indicator diagrams?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 61: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/61.jpg)
What is the difference between petrol engine and diesel engine indicator diagrams?
The petrol engine diagram has a sharper peak at the start of the expansion stroke than diesel engines (due to spark).
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 62: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/62.jpg)
Why are corners rounded on actual indicator diagrams?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 63: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/63.jpg)
Why are corners rounded on actual indicator diagrams?
It’s theoretically assumed that the same air is used constantly but actually the valves need time to open and close.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 64: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/64.jpg)
Why doesn’t heating take place at a constant volume in a real engine?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 65: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/65.jpg)
Why doesn’t heating take place at a constant volume in a real engine?
The increase in pressure and temperature isn’t instantaneous in a real engine.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 66: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/66.jpg)
Why don’t theoretical indicator diagrams include the negative work done between
the exhaust and induction lines?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 67: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/67.jpg)
Why don’t theoretical indicator diagrams include the negative work done between the exhaust and induction lines?
It assumes the same air continuously cycles round the system.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 68: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/68.jpg)
Why do theoretical indicator diagrams have a higher peak than actual
diagrams?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 69: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/69.jpg)
Why do theoretical indicator diagrams have a higher peak than actual diagrams?
The temperature rise from burning the gas isn’t as large as predicted as the fuel isn’t completely burnt, so maximum pressure isn’t achieved (hence lower peak).
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 70: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/70.jpg)
Why is the area within the indicator diagram loop smaller for real engines
than theoretical engines?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 71: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/71.jpg)
Why is the area within the indicator diagram loop smaller for real engines than theoretical engines?
The net work done by an actual engine is less than for a theoretical engine as energy is needed to overcome friction in the engine’s moving parts.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 72: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/72.jpg)
What is the input power of an engine?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 73: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/73.jpg)
What is the input power of an engine?
Input power = calorific value of fuel x fuel flow rate
The amount of heat energy per unit time it could gain from fuel.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 74: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/74.jpg)
How can you calculate the work done on the gas during the compression phase of
an indicator diagram?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 75: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/75.jpg)
How can you calculate the work done on the gas during the compression phase of an indicator diagram?
The area underneath the curve during the compression phase.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 76: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/76.jpg)
How can you calculate the work done by the gas during the expansion phase of
an indicator diagram?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 77: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/77.jpg)
How can you calculate the work done by the gas during the expansion phase of an indicator diagram?
The area underneath the curve during the expansion phase.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 78: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/78.jpg)
How can you calculate the net work done during the cycle?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 79: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/79.jpg)
How can you calculate the net work done during the cycle?The area enclosed by the loop, which is work done on the gas during compression minus the work done by the gas during expansion.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 80: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/80.jpg)
How can you predict the engine’s indicated power?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 81: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/81.jpg)
How can you predict the engine’s indicated power?
The area enclosed by the loop x number of cycles per second x number of cylinders.
It is the net work done by the engine cylinder in one second.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 82: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/82.jpg)
Why would the output power be less than the indicated power?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 83: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/83.jpg)
Why would the output power be less than the indicated power?
Some power is used when overcoming frictional forces, this power is called frictional power.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 84: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/84.jpg)
How can you calculate output/brake power ?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 85: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/85.jpg)
How can you calculate output/brake power ?Brake power is the power delivered to the crankshaft of the engine.
P = T⍵
In this case P is the output/brake power, T is the engine torque and ⍵ is the angular velocity of the crankshaft.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 86: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/86.jpg)
How can frictional power be calculated?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 87: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/87.jpg)
How can frictional power be calculated?
Frictional power = Indicated power - brake power
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 88: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/88.jpg)
How do you calculate the overall efficiency?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 89: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/89.jpg)
How do you calculate the overall efficiency?
Brake power / input power
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 90: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/90.jpg)
How do you calculate the thermal efficiency ?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 91: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/91.jpg)
How do you calculate the thermal efficiency ?
Indicated power / input power
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 92: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/92.jpg)
How do you calculate the mechanical efficiency?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 93: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/93.jpg)
How do you calculate the mechanical efficiency?
Brake power / indicated power
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 94: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/94.jpg)
Why can’t an engine work using only the 1st Law of thermodynamics?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 95: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/95.jpg)
Why can’t an engine work using only the 1st Law of thermodynamics?
Even with the most theoretically efficient engine, some energy is lost to overcoming friction, hence the heat energy can’t all be transferred to work.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 96: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/96.jpg)
What is the Second Law of thermodynamics?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 97: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/97.jpg)
What is the Second Law of thermodynamics?
The heat energy inputted to an engine is equal to the useful work done by the engine and the heat lost to the sink.
Heat cannot be completely converted to work without some being lost in heating a colder body (sink).
Heat engines must operate between a heat source and a heat sink.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 98: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/98.jpg)
What is the consequence of the second law of thermodynamics for a heat
engine?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 99: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/99.jpg)
What is the consequence of the second law of thermodynamics for a heat engine ?
A heat engine needs to work between a (hot) source and a (cold) sink.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 100: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/100.jpg)
Why are CHP plants useful for places such as green houses and schools?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 101: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/101.jpg)
Why are CHP plants useful for places such as green houses and schools?Heat engines have an efficiency of around 35% , they transfer over twice as much energy to the surroundings as is used for useful work. The waste heat can be used for thermal heating in buildings (limiting energy waste).
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 102: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/102.jpg)
What is a reversed heat engine?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 103: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/103.jpg)
What is a reversed heat engine?
An engine that transfers heat from a colder to a hotter place, these places are reservoir spaces.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 104: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/104.jpg)
What is a heat pump?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 105: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/105.jpg)
What is a heat pump?
A heat pump provides maximum energy per joule of work to the hot reservoir.
It is an engine used to heat places.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 106: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/106.jpg)
What is a refrigerator?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 107: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/107.jpg)
What is a refrigerator?
A refrigerator removes the maximum energy per joule of work from a cold reservoir.
It is used for air conditioning.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 108: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/108.jpg)
For a refrigerator and a heat pump, is work done onto the system or by the
systems?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 109: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/109.jpg)
For a refrigerator and a heat pump, is work done onto the system or by the systems?
Work needs to be done on the systems, as both systems need inputted energy to operate.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 110: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/110.jpg)
Why can’t we use the term efficiency when considering the effectiveness a
heat pump and refrigerator?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 111: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/111.jpg)
Why can we use the term efficiency when considering the effectiveness a heat pump and refrigerator?
The coefficient of performance (COP) is used instead, as it often exceeds 1 greatly, whilst efficiency can never exceed 1.
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 112: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/112.jpg)
How can you calculate the COP of a refrigerator?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 113: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/113.jpg)
How can you calculate the COP of a refrigerator?
COPref = QC / W or TC / TH - TC
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 114: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/114.jpg)
How can you calculate the COP of a heat pump?
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu
![Page 115: AQA A-Level Physics - PMT](https://reader031.vdocuments.site/reader031/viewer/2022012422/61771199ce2c514bf6482e67/html5/thumbnails/115.jpg)
How can you calculate the COP of a heat pump?
COPhp = QH / W or QH / (QH- QC)
The maximum theoretical COP is:
TH / (TH- TC)
https://bit.ly/pmt-cc https://bit.ly/pmt-cchttps://bit.ly/pmt-edu