application instructions bonds to polyethylene, pvc, steel, fiberglass, and aluminum
TRANSCRIPT
![Page 1: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/1.jpg)
Application Instructions
Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum
![Page 2: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/2.jpg)
Description
BonDuitTM Conduit Adhesive is a two-part, rapid-cure resin system designed to bond polyethylene, PVC, fiberglass metals and composites. It forms a durable long-lasting, strong bond that is airtight and watertight.
![Page 3: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/3.jpg)
Easy To Use
Create a splice in less than 5-minutes.
No special tools
No specialtraining needed
![Page 4: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/4.jpg)
BonDuitTM BT-KIT
The BT-KIT contains all material to make a joint. BonDuitTM BT-KITG includes the application tool for applying BonDuitTM.
![Page 5: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/5.jpg)
Cut ConduitTo prepare the splice, cut conduit to the desire length. Make a 90o angle cut. Taper edges with a rasp or knife to a 45o angle.
![Page 6: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/6.jpg)
Sanding Conduit
Use 80-grit abrasive cloth to sand outside of conduit ½ inch beyond the depth of the coupling.
![Page 7: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/7.jpg)
Sand Coupling
Use 80-grit abrasive cloth to sand inside of coupling. Surface should be rough with all polish removed.
![Page 8: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/8.jpg)
Clean Coupling and Conduit
Clean sanded surfaces of both conduit & coupling with TRTM Cleaner to remove any oils and displace moisture.
![Page 9: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/9.jpg)
BonDuitTM Cartridge
BonDuitTM Adhesive is packaged in a 1.7oz (50 ml) multi-use cartridge.
Static mixer combines the two parts.
![Page 10: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/10.jpg)
Dispensing Tool
Insert cartridge into dispensing tool for an easy, clean way to mix and apply BonDuitTM Conduit Adhesive.
![Page 11: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/11.jpg)
Prime The Cartridge
Prime the cartridge by depressing the handle 1 to 2 times after the material is coming out of the nozzle. This will make sure you are getting an even mixture.
![Page 12: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/12.jpg)
Applying BonDuitTM
Place BonDuitTM in a 1/8- to 1/4-inch bead around the outer edge of the conduit.
![Page 13: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/13.jpg)
Placing Coupling on ConduitPlacing Coupling on Conduit
Immediately twist coupling onto the conduit. Smooth any excess BonDuitTM.
![Page 14: Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum](https://reader031.vdocuments.site/reader031/viewer/2022013003/5519eb03550346d67b8b4b55/html5/thumbnails/14.jpg)
Finished
Watertight and airtight seals.High-strength durable bond. Finish in minutes. No special tools or training.