apk es85 referenz katzlberger 2015 - en - austropressen · 2015-12-11 · reference page 1...
TRANSCRIPT
REFERENCE Page 1
Austropressen Tel: +43 7662 8218 [email protected]
Roither Maschinenbau GmbH Fax: +43 7662 8218 21 www.austropressen.com
CHANNEL BALING PRESS APK-ES85-1700
OPTIMAL SOLUTION FOR AUSTRIAN WASTE DISPOSAL COMPANY
The company Katzlberger GmbH has been operating in the field of municipal and industrial
waste since 1977. In the beginning they were responsible for the garbage collection of 20
communities in Upper Austria. Since then, the company has developed into a disposal
company for non-hazardous as well as hazardous waste. Today about 80 employees are
working in different departments, including demolition and earth moving, transport, rental
fleet of equipment and of course waste management and recycling.
At the site of the company in Mettmach a waste management center is operated, where
garbage as well as collected recyclables are processed and stored. Cardboard and various
plastics fractions are compacted into bales for further transport.
The old channel baler no longer managed to process the required throughput of the growing
company. Some materials could not be handled at all, for example hard plastics from the
garbage collection or agricultural film and agricultural fleece of the surrounding farms.
With particular whishes and requirements, the company applied to Austropressen. In
addition to durability, high bale weights, high throughput and material versatility, the energy
efficiency of the channel baler was also an important aspect to the environmentally
conscious entrepreneur Wolfgang Katzlberger.
Fulfilling all the given requirements, the fully automatic channel baling press APK-ES85 was
chosen and successfully commissioned in July 2015. With a power of 2x45 kW the baler
reaches 850 kN, a specific surface pressure of 103 N/cm² and a theoretical capacity of
510 m³/h.
Mr. Katzlberger and Mr. Sallaberger in front of the new channel baler APK-ES in Mettmach, Austria.
REFERECE Page 2
Austropressen Tel: +43 7662 8218 [email protected]
Roither Maschinenbau GmbH Fax: +43 7662 8218 21 www.austropressen.com
THE RESULTS
The APK-85 from Austropressen met and even exceeded the specified requirements of the
company Katzlberger. "Now we can process difficult material like agricultural film without
problems. The bale weights of cardboard and plastic film have been increased by more than
50% and the throughput is high enough to even accept orders from other companies." says
Mr. Sallaberger, responsible for the department disposal and recycling.
MATERIALS AND BALE WEIGHTS
Every year, the company processes
approximately 3,000 tons of cardboard (mostly
packaging material). With dimensions of
1.10x0.75x1.2m, bale weights of 600kg are
currently achieved (compared to the previous
400kg).
About 1,500 tons of plastics are processed
annually at the plant; thereof 800 tons of hard
plastics, 300 tons of agricultural film and 400
tons of mixed film.
The bale weights of mixed film could be doubled to 500kg with the new channel baler.
Agricultural fleece and hard plastics could not be processed previously because of
deadlocks and blockings in the pre-press flaps. The special and patented cutting unit of
Austropressen guarantees that also this kind of material can easily be compacted into dense
and stackable bales.