aon grand day 1 june 19 - jec composites...burned for energy, producing co2 • fossil hydrocarbons...
TRANSCRIPT
10
Environmentally friendly transportation means Reducing production costs Using recycled carbon fiberèèè Lightweighting Cost-effective materials and manufacturing solutions Increasing mechanical propertiesèèèè
SESSION 1: THE CHALLENGE(S) IN BUILDING AND INFRASTRUCTURE
8:00am 10:30am
Day 1 June 19
Pr. Mark GoulthorpeMIT Department of Architecture, Founder ZERO+, DECOI, HypoSurface MIT DEPARTMENT OF ARCHITECTURE
9:00am - 9:30am
A new carbon ontology: Hydrocarbons as benign material resource for civili-zational-Scale Building
Pr. Mike LepechAssociate Professor, Civil and Environmental Engineering DepartmentSTANFORD UNIVERSITY
8:30am - 9:00am
The environmental, social, and econo-mic Impacts of composite buildings
• Life cycle assessment is a powerful tool to assess the sustainability of new construction materials
• Composites can be an environmentally sustai-nable alternative to conventional construction materials
• The environmental, social, and economic advantages of composite construction mate-rials are unique to each project and must be considered in design
Pr. Matteo PasqualiChair, Department of Chemistry and Biomolecular EngineeringRICE UNIVERSITY
9:30am - 10:00am
A better future for fossil hydrocarbons: build with them, don’t burn them!
• Over 95% of the world fossil hydrocarbons are burned for energy, producing CO2
• Fossil hydrocarbons can be converted into valuable material with concurrent production of hydrogen, a clean fuel
• Such valuable materials may displace metals as conductors, structural, and building mate-rials
Chris ToomeyVice President, Major ProjectsMCKINSEY & COMPANY & MCKINSEY GLOBAL INSTITUTE
8:00am - 8:30am
The scale, value and trends of projected building/infrastructure activity globally
• Spending in infrastructure continues to grow strongly; still, there is a substantial gap in infrastructure spending vs. requirements
• Of note, overall construction productivity still lags other industries – need to optimize the investment
• Composites represent a growing trend that has multiple benefits in the construction industry
• Several hurdles present opportunities for the industry to increase the use of composite
10:30am - 11:00am Networking Break
10:00am - 10:30am
Round table Upstream viewpoints: The stranded asset scenario as motivating change
> MCKINSEY, SHELL, MIT, STANFORD
Aon Grand Ballroom
11
Environmentally friendly transportation means Reducing production costs Using recycled carbon fiberèèè Lightweighting Cost-effective materials and manufacturing solutions Increasing mechanical propertiesèèèè
SESSION 2: LESSONS FROM OTHER SECTORS
11:00am 12:30pm
Luca RizzottiKey AccountPERSICO ARCHITECTURE
11:00am - 11:30am
Learning from automotive: attaining agile, cost-effective production of buildings
• Persico is a leading group active in the en-gineering and production of molding machines
• Persico has also large Marine and Architecture division that develops boats and architectural products out of large molds.
• Persico has the company culture , technolo-gy and innovation drive to connect the mass production ability to other industries such as construction
Radek MichalikPrincipal Engineer & Senior Director of Innovation & TechnologyMC - RADEK MICHALIK CONSULTING
11:30am - 12:00pm
An innovative Design & Composite Material Changing Staging Industry
• Spaceframe the first carbon fiber modular tou-ring system used by U2 for The Joshua Tree Tour 2017
• Story of the successful product vision where composite materials and creative design and engineering made it possible.
• Business and technical insight into the deve-lopment of the revolutionary touring system.
12:30pm - 1:30pm Lunch
Bill PearsonMaterials Technical DirectorNORTH SAILS
12:00pm - 12:30pm
Thin ply technology carbon fiber materials and manufacturing: why not for buildings?
• Mass Customization: Automated manufac-turing strategies and fabrication robotics for large scale custom parts
• Unitary monolithic 3D moulded structures• Bespoke material placement
Business Meetings Schedule
10:30am - 10:55am | 11:00am - 11:25am 11:30am - 11:55am | 12:00pm - 12:25pm
JEC Forum Chicago 2019 - Event’s Guide
SESSION 3: LIGHTER, ENERGY-EFFICIENT TRANSPORTATION MEANS THANKS TO COMPOSITES
1:30 pm 3:00pm
3:00pm - 3:30pm Networking Break
Julia AttwoodHead of Advanced MaterialsBLOOMBERG
1:30pm - 2:00pm
Lightweighting Autos: Impacts of EVs, Policy Drivers, and Costs in the US, EU and China
• Policy drivers for lightweighting• Economics and material options• Company strategy and manufacturing
Daniel RozelmanSenior Technical Sales ManagerHENNECKE INC
2:00pm - 2:30pm
Structural Polyurethane Honeycomb Parts
• Lightweight• Corrosion resistent• Part consolidation
Christian FaisPresident/CEOSCHMIDT & HEINZMANN NORTH AMERICA INC
2:30pm - 3:00pm
Innovative production technology for mass production – SMC Press Auto-mation For Processing SMC Material And Handling Final Products
• Part reduction• Full automation• Mass production
Business Meetings Schedule
1:30pm - 1:55pm 2:00pm - 2:25pm 2:30pm - 2:55pm
JEC Forum Chicago 2019 - Event’s Guide
12
13
SESSION 4: MULTI-MATERIAL SOLUTIONS IN TRANSPORTATION
3:30pm 5:00pm
Dr. Arnaud DereimsR&D Project Manager – CoE Composite Virtual ManufacturingESI GROUP
4:00pm - 4:30pm
Advanced modeling and simulation of SMC processes
• Composite Manufacturing Simulation• Advanced numerical modelling of SMC
processes• Original functionalities leading to more
accurate simulation
Pal SwaminathanBusiness Development ManagerLANXESS
3:30pm - 4:00pm
One Step Hybrid Molding Process, a cost effective manufacturing technique for composite parts
• Cycle times less than 60 seconds • Design freedom and functional integration • Lower investment cost compared to other
technologies
Chris Mikesell Chomarat North America Sales Manager-Advanced CompositesCHOMARAT
4:30pm - 5:00pm
Non Crimp Glass Fabrics with high resistance stitching yarn for ther-moplastics processes in automotive industry
• How to optimize main direction parts perfor-mance whilst bringing new angles possibilities
• How to improve modulus with NCF against woven fabrics
• How to improve cost performance thanks to multiaxial technology
Business Meetings Schedule
3:30pm-3:55pm | 4:00pm-4:25pm 4:30pm-4:55pm
14
6:30pm - 10pm
Upon Invitation only
Departure at the Navy Pier Dock
Chicago Exclusive Dining ExperienceTake in Chicago’s iconic skyline and the scenic Chicago River with architecture and sightseeing cruise along Lake Michigan
5:15pm - 6:15pm
Allparticipantsare invitedin the Aon GrandBallroom
Keynote Speech 5:15pm - 5:45pmHyperloop & Composites: Transforming Transportation at the Speed of Sound. Dirk Ahlborn, co-founder & CEO, Hyperloop Transportation Technologies
JEC Innovation Awards Ceremony 5:45pm-6:15pmAnimated by Peter Hopwood, Founder, Hopwood communications
JEC Forum Chicago 2019 - Event’s Guide
15
Day 2 June 20
Dr Mark HobbsHead of Structural EngineeringPREMIER COMPOSITE TECHNOLOGIES LLC
8:30am - 9:00am
Advanced FRP Structures – from inspiration to reality
• Advanced FRP structures in the built environment
• Showcase of real life structures that amaze and delight
• Lessons learnt and inspiration for the future
Andrew MafeldFounder & LeaderCONNECTRA GROUP
9:00am-9:30am
Global Growth Opportunities for Composites in New and Replacement Infrastructure Applications
• Overview of the key segments of the global Infrastructure sector
• Many examples of the use of composites in Infrastructure
• Trends in the market for composites in Infrastructure
SESSION 5: FIRST RESPONDERS: ENVIRONMENTAL, LOGISTICAL, ECONOMIC, POLITICAL CHALLENGES FOR COMPOSITE BUILDINGS
8:30am 10:00am
8:00am - 8:30am
JEC Composites Observer • Composites industry value chain• Key figures of the global composites
industry in 2018• Market dynamics by areas
and application sectors
Franck GlowaczInnovation Content LeaderJEC GROUP
Speaker :
Aon Grand Ballroom
16
11:00am - 11:30am Networking Break
Jens BoelkeHead of Composites & New TechnologiesTHOMAS GMBH + CO. TECHNIK + INNOVATION KG
10:30am - 11:00am
Sleeping into the Future! - From Bed Furniture to a Composites Globe
• From boxspring to unique bed technology • The big change from a wood working company
becoming a high performance composites producer
• How radius pultrusion technology opened the automotive and building and construction market for us
Matthieu LandaisBusiness DevelopmentEPSILON COMPOSITE
10:00am - 10:30am
Carbon fiber evolution in buildings 1990-2020
• Strengthening wood, concrete and metals• Full new CFRP structures examples• CFRP for tooling and transport means
SESSION 6: PULTRUSION NOW OPENS NEW POSSIBILITIES IN CONSTRUCTION
10:00am 11:00am
Business Meetings Schedule 10:00am-10:25am | 10:30am-10:55am
Justin JinCEOAXIA MATERIALS
9:30am - 10:00am
Composites prefabricated SIPs for mass volume manufacturing and construction systems
• Manufacturing technology of large dimension, high strength, lightweight Composites SIPs technology will be introduced
• The code compliances with LitePan including fire proof, structure, structural connections, and building finishing details will be introduced
• Environmental impact of Pixel Haus including LCA study, recycle and building case stories will be introduced
Business Meetings Schedule
8:30am-8:55am | 9:00am-9:25am 9:30am-9:55am
JEC Forum Chicago 2019 - Event’s Guide
17
1:00pm - 2:00pm LunchMario CeldranCEOPHI 4
12:30pm - 1:00pm
The multivalent forms + applications of graphene: solar skins, super capa-citors, resins...
Mario CeldranCEOPHI 4
John GargaszCEONANOCOMPHUNTSMAN
12:00pm - 12:30pm
Can a Greenhouse gas save the planet ?
• Introducing Miralon – a new carbon material• Conversion of Methane to Hydrogen and
Miralon• Large scale green house gas emission
reduction
Dr. Leonardo SpanuSr. Researcher, Shell International Exploration & ProductionSHELL
11:30am - 12:00pm
Advanced Carbon Materials for struc-tural applications: an opportunity for natural gas monetization?
• Natural Gas Monetization• Advanced Carbon Materials from Pyrolysis• New Supply chain
SESSION 7: EMERGING TECHNOLOGIES ROUND TABLE
11:30am 1:00pm
18
Luca Rizzotti Key Account PERSICO ARCHITECTURE
3:00pm - 3:30pm
Project Emergent City: A multi-modal transport hub
• We need to adapt to new transport systems and rapid changes
• We need new places where we can move from one transport mode to another
• We need the buildings that can rapidly adapt to changes, light and with minimum internal structures.
Emmanuel FlouvatChief ExecutiveMF TECH
2:30:pm - 3:00pm
MFTECH Filament winding robot
• Why the robot• Type of Process• MFTECH Filament winding techno for H2
Composite pressure vessels
Ed Bernardon Vice President, Strategic Automotive Initiatives SIEMENS
2:00pm - 2:30pm
Realizing our transportation future, can we get there without Lightweighting ?
• Autonomous vehicles why or why not?• When we finally get AV’s what do we get?• Travel as an experience and the Living Internet
SESSION 8: TRANSPORTATION IN SMART CITIES
2:00pm 3:30pm
Business Meetings Schedule
2:00pm-2:25pm | 2:30pm-2:55pm3:00pm-3:25pm
JEC Forum Chicago 2019 - Event’s Guide
19
• Composite ply shape optimization• Bonded joint sizing and analysis• Structural weight reduction
Tom DryeVice President Emerging Markets & Innovation, and Application DevelopmentTECHMER PM
4:00:pm - 4:30pm
The role of Engineered Compounds and 3D printing in the transportation and construction industries… a Green solution for tooling
• Disruptive technology• Reduce time to market at a competitive cost• Design freedom and recyclability
Nick Scott Applications Engineer LUNA INNOVATIONS
3:30pm - 4:00pm
Measuring Strain and Temperature within 3D Printed Components
• The impact of residual strain on design• Measuring strain with distributed fiber optic
sensors• The benefits of embedded sensors
SESSION 9: TECHNOLOGIES FOR THE FUTURE
3:30pm 5:00pm
Business Meetings Schedule
3:30pm-3:55pm | 4:00pm-4:25pm4:30pm-4:55pm
Craig CollierPresidentHYPERSIZER
4:30pm - 5:00pm
Practical Optimization of Composite Structures for Infrastructure and Transportation Applications