“made by hand, with passion”€¦ · outdoors, and it can be made in natural grey, white or...

APPLICATIONS DESCRIPTION Cementino is a wall lamp that illuminates and emphasizes the entrances of buildings from overhead, from above doors, when there is no possibility of installing spotlights in the ground. It recalls the shape of an old lampshade in pleated fabric, an icon of the lighting world, reinterpreting it by using a different material. Small and easy to install, it can be used both indoors and outdoors, and it can be made in natural grey, white or anthracite grey cement, all 100% recyclable. It can also be painted to contrast or tone with the colours of the walls on which it is installed. Cementino has a cement body that is mounted on a metal holder with different lengths, so that it can be used on a wall or on the ground (garden) depending on differing requirements: the idea being that with a single cement body, lamps of different types and functions can be created. It incorporates a single-LED spotlight which, thanks to the different optics, enables different effects to be achieved both on the wall and on the ground. Design: Marco Merendi CEMENTINO “MADE BY HAND, WITH PASSION”

Upload: others

Post on 16-Jun-2020

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: “MADE BY HAND, WITH PASSION”€¦ · outdoors, and it can be made in natural grey, white or anthracite grey cement, all 100% recyclable. It can also be painted to contrast or

APPLICATIONS DESCRIPTION

Cementino is a wall lamp that illuminates and emphasizes the entrances of buildings from overhead, from above doors, when there is no possibility of installing spotlights in the ground. It recalls the shape of an old lampshade in pleated fabric, an icon of the lighting world, reinterpreting it by using a different material. Small and easy to install, it can be used both indoors and outdoors, and it can be made in natural grey, white or anthracite grey cement, all 100% recyclable.It can also be painted to contrast or tone with the colours of the walls on which it is installed.

Cementino has a cement body that is mounted on a metal holder with different lengths, so that it can be used on a wall or on the ground (garden) depending on differing requirements: the idea being that with a single cement body, lamps of different types and functions can be created. It incorporates a single-LED spotlight which, thanks to the different optics, enables different effects to be achieved both on the wall and on the ground.

Design: Marco Merendi

CEMENTINO

“MADE BY HAND,WITH PASSION”

TECHNICAL FEATURES

TECHNICAL DRAWING

OPTICS, COLOUR TEMPERATURE AND CRI

CODING

CHARACTERISTICS AND ADVANTAGES

High efficiency (>100 lm/W).ANSI compliant binning.Excellent lumen maintenance and colour stability.Extensive dimming range – fully dimmable.Highly efficient secondary optics.Long life and reduced maintenance costs.Ecological, no disposal restrictions.

2800K

CRI

>90

3200K

CRI

>85

4200K

10° 21° 39° 25° 40°10°x44°

5500K RGB

Note: not all combinations of the characteristics are possiblewww.luminart.co.uk - [email protected] - tel: +44 (0) 1992 531 718

page 34

OTHERCOLOURS

ONREQUEST

CEM - 01

Power supply:

Colour:

700 - 700mA (single colour only)350 - 3x350mA (RGB)

WW2 - warm white 2800KWW3 - warm white 3200KNW4 - neutral white 4200KCW5 - cold white 5500KRGB - Red, Green, BlueOther colours on request010 - 10° (single colour)

021 - 21° (single colour)039 - 39° (single colour)x44 - 10°x44° (single colour)025 - 25° (RGB)040 - 40° (RGB)

Optics:

Exte

riors

No and Type of LED 1x CREE X-PE/XP-G 1x Seoul P5II

Power supply 350 / 700mA

Body material Concrete /anticorodal aluminium

Electrical connection cable L=2m

Cooling passive

Installation Wall-mounted

Protection rating IP67

Class III