“advanced industrial automation technologies” › wp-content › uploads › 2020 › 02 ›...

REPORT ON

“Advanced Industrial Automation Technologies”

Conducted by COER

Date: 8-13 July 2019

Venue: Conference Hall, Administrative block, COER, Roorkee Number of participant: 42 Speaker Ms. Vandana Mohan, Director, Anuvidyut Pvt. Ltd Roorkee

Mr. Varun Punjani, Head Sales Universal Robots Noida

Mr. Manish Kumar Garg, Universal Robots Noida

Prof. Anbanandam Ramesh, Management Deptt. IIT Roorkee

Prof. Parth Pratim Roy, IIT Roorkee

Mr. Ashok Kumar, CETPA Roorkee

Mr. Anil Raj Rana, Prolific Automation Pvt. Ltd, Mumbai

Dr. Roushan Kumar, Asst. Professor, Mechanical Deptt. UPES, Dehradun

Mr. Avind Kumar, Asst. Prof., COER, Roorkee

Mr. M S Chauhan, Director,Arise Construction Equipments Roorkee

The Faculty development program has been organized with the prior Approval and guidance of

honorableDr. H S Bhadauria, Coordinator TEQIP-III UTU, Dehradun and DirectorGeneralof

College of Engineering RoorkeeDr. S.P. Gupta. The program was initiated and supervised

ofconvenersDr. Amit Agarwal, Director, Dr. A P J Institute, Tanakpur and Dr. Brij Mohan

Singh, Dean Academics, COER. The programme was planned and conducted by Coordinator Dr.

Rajesh Kumar and Mr. B D PatelHOD ET & COE along with Committee Members,Mr. Nitin Chand Asst. Prof, EN COER, Mr. Vishal Chauhan,Asst. Prof., EN COER and Mr. Ankit Singhal Asst.

Prof. ME Deptt.COER. Along with the faculty members fromvarious colleges under UTU.

Program was conducted under the continuous guidance of Resource persons Ms. Vandana

Mohan, Director,Anuvidyut Pvt. Ltd Roorkee, Mr. Varun Punjani, Head Sales Universal Robots

Noida, Mr. Manish Kumar Garg, Industry Expert, Universal Robots Noida, Dr. Anbanandam

Ramesh, Associate Prof., Department of Management Studies,IIT Roorkee, Dr. Parth Pratim

Roy, Assistant Prof. Department of CSE,IIT Roorkee, Mr. Ashok Kumar, Industry Expert

CETPA Roorkee,Mr. Anil Raj Rana, Automation Engineers, Prolific Automation Pvt. Ltd, Noida

(U.P.),Dr. Roushan Kumar, Asst. Professor, Mechanical Engineering Department,UPES

Dehradun, Mr. Avind Kumar, Asst. Prof, COER Roorkeeand faculty members of Centre of

Excellence, COER which make this a grand success. We are heartily thankful toProfessor

Narendra S. Chaudhari, Vice-Chancellor, UTU, Dehradun for accepting our invitation and was

the chief Guest in the inauguration function of this programme on July 8, 2019.We are thankful

to Dr. H S Bhadauria, Dr. Amit Agarwal and Members of TEQIP-III UTUfor providing us

thisopportunity tosponsor this FDPfor overall quality improvement in Technical Education at our

institute level with University.

Glimpse of “Advanced Industrial Automation Technologies”

REPORT ON

Computer Training for Non-Teaching Staff (NTS)

Conducted by Department of Mechanical Engineering

Date: 5-7 June 2018

Venue: CAD Lab, COER, Roorkee

Number of participant:13

Trainer: Mr. Mohit Senger,

Assistant Professor

COER, Roorkee

Mr. Amit Dhiman

Assistant Professor

COER, Roorkee

Participants:

Computer training had given to Non-Teaching staff of Mechanical Engineering Department,

COER, Roorkee. Details of the program conducted are as follows:

Day 1 activities

Basic concepts of Microsoft word, Introduction.

Presented the Basic Concepts of using Microsoft Word. For new and experienced Word

users.

Formatting text in Microsoft Word. How to use Word styles to format text in Word.

Day 2 Activities

Basic steps in creating a new Word document and entering simple text.

Use of tables and tabs to arrange text.

Use a bulleted paragraph style for bullets and dotpoints.

Day 3 Activities

Basics of editing in Microsoft Word: how to add, delete, change, copy, move and format text. How to find and replace text. How to check spelling and grammar.

Use page numbering and let the text flow from page to page.

Basic guide to printing your Word document.

Glimpse of Training

REPORT ON

Workshop on “NBA-An outcome based education”

Conducted by COER

Date: 18 August 2018

Venue: COER, Roorkee


Speaker Dr.AnitaRawat , Registrar Uttarakhand Technical University ,Dehradun and

Coordinator TEQIP-III.

Dr.S.B.Deosarkar,Professor ,Dr.Babasaheb,Amedkar University

Dr.SanjeevSofat,Professor ,PEC University

Dr.G.L. Pahuja,Professor, NIT Kurukshetra

A workshop on “NBA-An outcome based education” under the agies of Technical Education

Quality Improvement Programme (TEQIP-III) was held at College of Engineering Roorkee

(COER) on 18th of August 2018.

The workshop was started at 10:30 AM with the arrival of Dr.AnitaRawat , Registrar

Uttarakhand Technical University ,Dehradun and Coordinator TEQIP-III.

Dr.S.B.Deosarkar,Professor,Dr.BabasahebAmedkar University ,Dr.SanjeevSofat,Professor ,PEC

University and Dr.G.L. Pahuja,Professor, NIT Kurukshetra were there in the workshop as our

guests and speakers.

Maj. Gen. (Dr) Om Prakash Soni, Director General COER welcome the guests and then

inaugural the workdhop by delivering his address. Dr.AnitaRawat addresses the audience and

told us about TEQIP as an initiative taken by the university.

After tea break ,at 11:30AM session 1 started and in this session our speaker Prof.SanjeevSofat

deliver his lecture on why NBA is important ,Why it is required and what comes under NBA.

After lunch break , at 2:30 PM session 2 started and in this session Dr.S.B.Deosarkar continues

with NBA accreditation ,its rules to apply for accreditation. He told us when an institute can

apply for it and also why it is important.

At 4:00PM our third speaker deliver his lecture with some more points on NBA accreditation.

At the end of the workshop Maj.Gen O.P Soni present a memento to the guests as a token of

love.

After that he delivers vote of thanks with National Anthem.

In the workshop Dr.Brijmohan Singh (Dean-Acd), Dr.V.Ksingh(Dean-SW), Dr.D.V Gupta(Den

Humanities) were present.

Around 50 participants were there from different institutes.

For the successful completion of the workshop Dr.Gunjan Aggarwal HOD,ME department and

her team members Mr.SohanLal,Ms.DivyaMishra,Ms.Nilima, Mr.Rajesh, Mr.Ankit had worked

really hard.

REPORT ON

Emerging Trends in Engineering Science and Technology

Conducted by COER Date: 29-30March 2014



Speaker Dr. K.K. Vishwas Professor IIT Delhi Dr. G.S. Lehel Professor Patiala University

Dr. K.V. Arya Professor IIITM Gwalior etc.

A National Conference on “Emerging Trends in Engineering Science and Technology” (NCETEST-

2014) was organized during March 29-30, 2014 at COER, Roorkee. The occasions hailed galaxies like Dr. K.K.

Vishwas Professor IIT Delhi, Dr. G.S. Lehel Professor Patiala University, Dr. K.V. Arya Professor IIITM Gwalior

etc.The inaugural function of the conference received by Honorable Chief Guest Dr. R.K. Khandaal VC-UPTU

Lucknow, Dr. Manoj Arora, Director PEC-University of Technology, Dr. Shibban Kumar Bhushan, Executive

Director, MSPL Ltd., Dr. A.K. Gupta, Director, IRDE, Dehradun, Mr. Subhash Jain, Secretary, COER and Mr.

Shriyance Jain, Trustee COER. In the valedictory function of the conference Dr. S.K. Bhatacharya was the chief

guest and Mr. Rajiv Singh Lohan, CJM court Dehradun was the guest of honor. In first session (Manufacturing

Engineering) Dr. Dinesh Khanduja, NIT Kurukshetra delivered talk on Entrepreneurship. In second session

(Thermal Engineering) Dr. J.S. Saini, retired professor from IIT Roorkee now visiting faculty DIT Univeristy, Dehradun, delivered talk on Solar Air Heater and Dr. M.K. Khare delivered talk on Zero Waste Philosophy. In third

session (Automobile Engineering) Mr. P.S. Ranjit, Head Northern India region SAE India club spoke

on Development of Automobiles.

REPORTON

Research and Innovation in Engineering and Technology

Conducted by COER

Date: 28-29March 2015



Speaker Dr. T.S. Kamal, Chairman Electronics & Communication Engg.Board,

IEI, Kolkata

Dr. H.S. Jain Dean R&DVardhamanEngg. College Hyderabad

Professor RajeshChandra, Chairman IEI,RLC

Sh. J.C.Jain, CMD, Texplas Group of Industries, Haridwar etc..

A National Conference on “Research and Innovation in Engineering and Technology”

(NCRIET-2015) was organized during March 28-29, 2015 at COER, Roorkee. Mrs. Gunjan

Agarwal (HOD ME) along with Mr. B.D.Patel (HOD ET) organizied the conference. The

occasions hailed galaxies like Dr. T.S. Kamal, Chairman Electronics & Communication

Engg.Board, IEI, Kolkata, Dr. H.S. Jain Dean R&DVardhamanEngg. College Hyderabad,

Professor RajeshChandra, Chairman IEI,RLC, Sh. J.C.Jain, CMD, Texplas Group of Industries,

Haridwar, Sh. ShriyanceJain, Director, Texplas Group of Industries, Haridwar, Sh. M.K.Mittal,

Director General, COER, Dr.V.K.Jain, Director, COER-SM, Roorkee. The inaugural function of

the conference received byHonorable Chief guest DrPradeep Kumar, VC, DTU, New Delhi , Mr.

Subhash Jain, Secretary,COER and Mr. Shriyance Jain, Trustee COER. In the valedictory

function of the conferenceDr. U S Rawat, VC, SridevSumanUniversity, New Tehriwas the chief

guest and ProfessorRajesh Chandra, Chairman IEI, RLC, was the guest of honor.

REPORTON

Workshop on Intellectual Property Rights

Conducted by COER

Date: 10 January 2019

Venue: Conference Hall, Administrative block, COER, Roorkee Number of participant: 45 Speaker Prof. Himanshu Joshi, IIT Roorkee

As per the direction received from the MHRD innovation cell (MIC), a workshop was organized

on Intellectual Property Rights (IPR) for students and faculty members on 10th January, 2019.

In this workshop there was a two hours session by Prof. Himanshu Joshi, IIT Roorkee (local

expert of IPR) followed by a two hours Facebook live session from a central expert (Mrs.

ShwetasreeMajumder).

Session 1:

Prof. Himanshu Joshi, IIT Roorkee who is well known for delivering expert lectures on IPR was

the chief guest for first session. The session was coined by Prof. S P Gupta, DG COER with

welcome speech. He welcomed our chief guest by presenting a flower bouquet. After that anTV

interview of Prof. Joshi on IPR was played. Prof Himanshu Joshi started his talk with innovation

and its progression in India. He discussed some inventions and patents in Engineering field like

smart-boots, para-scooters, various patents in agriculture field (bicycle weeder, grape flakes) and

Biomedical field (surgical bandage, dental implant). Then he talked about the Intellectual

property rights. The main points of his talk are as follows:

How to identify an Intellectual Property.

Patent search

Why to protect IPs

Counterfeiting and Piracy

Various HEIs and IP issues

Patenting process in India

National IPR Policy

Session 2:

Second Session was a Facebook live session organized by MHRD innovation cell. Mrs.

ShwetasreeMajumder was the speaker of this session. Session was attended by faculty members

and students of COER. She also explained Intellectual property Right, its requirement, types of

patents. How to protect our IPs. How to find IPs and to register an IP. She also answered various

questions asked by the audience.

At last Prof. S P Gupta, DG COER thanked Prof. Himanshu Hoshi by presenting him a

memento.

REPORTON

Workshop on “efficient energy generation and utilization in

Uttarakhand”

Conducted by COER

Date: 10-12 March 2016

Venue: Conference Hall, Administrative block, COER, Roorkee Number of participant: 300 (EN, CE and ME faculty members and students of COER and other institute of Uttarakhand)

Speaker Prof RP Saini, IIT Roorkee Prof M.P. Sharma, IIT Roorkee Prof N.P Padhy, IIT Roorkee Prof Xiaolei Zhang, Queen’s University, UK Dr Mayank Kumar, University of Alberta, Canada

Day 1 activities a. Inauguration

b. Guest lectures by Dr RP Saini and Dr M.P. Sharma

Day 2 Activities: a. Guest lecturers (through Skype) by Dr Xiaolei Zhang and Dr Mayank Kumar

Day 3 Activities: a. Guest Lecture by Dr N.P. Padhy

b. Valedictory function

REPORT ON INDUSTRIAL FIELD VISIT

CONDUCTED BY: DEPARTMENT OF MECHANICAL ENGINEERING

Date: 19 April 2019

Venue: Uttam sugar mill Ltd. Libberheri, Roorkee

Number of participants: 40

Faculty Coordinator

1. Dr. Rajesh Kumar 2. Mr. Amit Kumar

Contact person :

Mr.L.S Lamba

Executive Engineer

Uttam sugar mill Ltd

UTTAM SUGAR MILLS LTD. is among the leading producer of Double Refined

Sugar in the Country. With extensive Research and Development, Uttam Sugar is

now producing the best quality sugar in the country. Uttam sugar mills .Ltd is also

producing eco-friendly power in which bagasse is used as a fuel. Bagasse and other

biomass based products such as rice husk, cane trash, mustard stalk/husk

woodchips, are raw materials for the co-generation business.

The main areas of focus of the visit

1. Raw material handling 2. Steam & power generation plant 3. Crystallization & sugar curing 4. Packing & branding

Signature of HoD



Date: 16 October 2019 to 17 October 2019

Venue: Ultra Tech Cement Ltd. Roorkee


Faculty Coordinator

1. Dr. Rajesh kumar 2. Mr. Amit Kumar

Contact person :

Bahadur Bandopadhyay

Asst. General Manager (HR)

UltraTech Cement Limited

Roorkee Cement Works

Roorkee

7088000779

UltraTech Cement Ltd. is the largest manufacturer of grey cement, Ready Mix Concrete (RMC)

and white cement in India. It is also one of the leading cement producers globally. UltraTech as a

brand embodies 'strength', 'reliability' and 'innovation'. Together, these attributes inspire

engineers to stretch the limits of their imagination to create homes, buildings and structures that

define the new India.

The objective of current industrial is to improve understanding of students with cement

manufacturing and to impart knowledge of raw materials used in cement manufacture.

Signature of HoD



Date: 10 October 2018

Venue: BHEL Haridwar


Faculty Coordinator

1. Dr. Rajesh Kumar 2. Mr. Mohit senger

Contact person : Rajesh Kumar AGM, BHEL Bharat Heavy Electrical Limited (BHEL) is largest Engineering and manufacturing enterprise in

india . It plays major role in core sector development of indian technology .It is one of Nine

largest public sector or PSUs of india known as "NAVRATNAS. BHEL was established in 1960

under the indo-soviet agreement of 1959 and 1960 in the area of scientific ,techinical and

industrial cooperation .

BHEL company works in following areas :

1. Power generation, transmission and

distribution

2. Industries

3. Transportation

4. Renewable Energy

5. International operation

6. Technology upgradation, research and

development.

The objective of current industrial visit is to improve understanding of students with turbine

blade manufacturing through casting and CNC machining and its integration on HP and LP

rotors. So student can better understand working of high pressure steam turbine and its various

parts.

Signature of HoD



Date: 10 April 2018

Venue: Chilla Power House Haridwar


Faculty Coordinator

1. Mr.Ankit kumar singhal 2. Mr. Mohit senger

Contact person :

Chandra shekhar

Executive Engineer

Chilla Power House Haridwar

The Power Station is a Run-of-River scheme on river Ganga located upstream of the holy

city Hardwar and was commissioned in the year 1980. The Power Station has four units of

36 MW each. The four Kaplan Vertical Shaft Turbines operate at a head of 32.5 m. Water of

River Ganga from Pashulok Barrage is diverted through a Power Channel to feed the

turbines of Chilla Power Station.

This industrial visit is conducted for providing an on-site experience of working of hydro-

power Plant and different equipment used in Hydro power plant.

Signature of HoD



Date: 5 April 2018



Faculty Coordinator

1. Mr.Varun kumar 2. Mr. Amit Kumar

Contact person :

Rajesh Kumar AGM, BHEL

Bharat Heavy Electrical Limited (BHEL) is largest Engineering and manufacturing enterprise in







distribution

2. Industries

3. Transportation

4. Renewable Energy



development.

The Objective of current industrial visit is to improve understanding of final year students with

turbine blade manufacturing through casting ad CNC machining and its integration on HP and

LP rotors. so students can better understand working of high pressure steam turbine and its

various parts.

Signature of HoD



Date: 23 March 2018

Venue: Roorkee irrigation workshop Roorkee


Faculty Coordinator

1. Mr.Ajay sharma 2. Mr. Mohit senger

Contact person :

Mr. Digaram saini

Junior Engineer

Roorkee irrigation workshop Roorkee

This industrial visit is conducted for providing an on-site experience of working of machine tools

and manufacturing processes like different welding processes and forging process so that

students can understand the concept od manufacturing practically.

Signature of HoD



Date: 15 Feb 2018 to 16 Feb 2018

Venue: Uttam sugar mill Ltd. Libberheri, Roorkee


Faculty Coordinator

1. Dr. Rajesh Kumar 2. Mr. Thomas Mathew

Contact person :

Mr.L.S Lamba

Executive Engineer

Uttam sugar mill Ltd

UTTAM SUGAR MILLS LTD. is among the leading producer of Double Refined

Sugar in the Country. With extensive Research and Development, Uttam Sugar is

now producing the best quality sugar in the country. Uttam sugar mills .Ltd is also

producing eco-friendly power in which bagasse is used as a fuel. Bagasse and other

biomass based products such as rice husk, cane trash, mustard stalk/husk

woodchips, are raw materials for the co-generation business.

The main areas of focus of the visit

1. Raw material handling 2. Steam & power generation plant 3. Crystallization & sugar curing 4. Packing & branding

Signature of HoD



Date: 2 November 2017 to 3 November 2017



Faculty Coordinator

1. Mr.Mohit senger 2. Mr. Amit Kumar

Contact person : Rajesh Kumar AGM, BHEL Bharat Heavy Electrical Limited (BHEL) is largest Engineering and manufacturing enterprise in







distribution

2. Industries

3. Transportation

4. Renewable Energy



development.

The Objective of current industrial visit is to improve understanding of students with turbine

blade manufacturing through casting ad CNC machining and its integration on HP and LP rotors.

so students can better understand working of high pressure steam turbine and its various parts.

Signature of HoD



Date: 21 November 2017 to 22 November 2017

Venue: Roorkee irrigation workshop Roorkee


Faculty Coordinator

1. Mr. Anuj Kumar 2. Mr. Ravi Prakash

Contact person :

Mr. Digaram saini

Junior Engineer

Roorkee irrigation workshop Roorkee

This industrial visit is conducted for providing an on-site experience of working of machine tools

and manufacturing processes like different welding processes and forging process so that

students can understand the concept of manufacturing practically.

Signature of HoD



Date: 12 September 2016 to 13 September 2016

Venue: JP Cement Roorkee


Faculty Coordinator

1. Mr. Varun Pratap Singh 2. Mr. Nagendra Kumar gupta

Contact person :

Praveen

The objective of current industrial is to improve understanding of students with cement

manufacturing and to impart knowledge of raw materials used in cement manufacture.

Signature of HoD



Date: 24 Feb 2016

Venue: Anchor Electrical Haridwar


Faculty Coordinator

1. Mr. Varun Punjani 2. Mr. Nagendra Kumar gupta

Contact person :

Sakshi Chauhan

Sr.Executive-HR

Anchor Electrical Pvt.Ltd Haridwar

Tel : 07895630406

Signature of HoD



Date: 27 September 2016 to 28 septerber 2016



Faculty Coordinator

1. Mr.Anhkush kumar 2. Ms. Nishtha Arya

Contact person :

Rajesh Kumar AGM, BHEL

Bharat Heavy Electrical Limited (BHEL) is largest Engineering and manufacturing enterprise in







distribution

2. Industries

3. Transportation

4. Renewable Energy



development.

The Objective of current industrial visit is to improve understanding of students with turbine

blade manufacturing through casting ad CNC machining and its integration on HP and LP rotors.

so students can better understand working of high pressure steam turbine and its various parts.

Signature of HoD

REPORT ON

GUEST LECTURE

ON

“CONCEPTS OF MEASUREMENT UNCERTAINTY”


Speaker Mr. Atul Dev, Scientist-G, Centre for Advance Mechanical, DEAL, Dehradun

Date 06 October, 2017

Venue Seminar hall MBA block

Audience: B.Tech (ME), 3rd year

A guest lecture was arranged for the students of B.Tech (ME), 3rd

year. Mr. Atul Dev was the

speaker of event. After the floral welcome he delivered a lecture on “Concepts of measurement

uncertainty”. He discussed basic concepts of measurements and measurement techniques. Error

analysis and uncertainty in measurements were also discussed with the students. He also

demonstrated some latest measuring instruments and their use. There was in interactive session

in which students asked many question about latest equipments used in industries.

At the end of the lecture vote of thanks was given by Dr. Gunjan Agarwal, HOD-ME. A

memento was also presented by Mr. G C Mishra, Senior Faculty member of Mechanical deptt.

Dr. Rajesh Kumar was the coordinator for the event.

Dr. Gunjan Agarwal

HOD-ME

REPORT ON

GUEST LECTURE

ON

“THE MECHANICS OF TRAUMATIC BRAIN INJURY IN WARFARE”


Speaker Dr. Shailesh Ganpule, Assistant Professor, MIED, IIT Roorkee

Date 17 November,2017


Audience: B.Tech (ME), 2nd

year

A guest lecture was arranged for the students of B.Tech (ME), 2nd year. After the floral

welcome and introduction, Dr. Shailesh Ganpule delivered a lecture on “The mechanics of

traumatic brain injury in warfare”. First of all he explained common injuries occurred due to

bomb explosion at the time of warfare. Then prediction of common injuries that could be

occurred due the pressure wave generated due to explosion. He explain role of computer

simulation to in the prediction of injuries. Then he disused a case of head injury due to warfare.

Its simulation and results were also explained. He motivated students to work on common

problems using simulation tools.


memento was also presented by Mr. Thomas Mathew, Senior Faculty member of Mechanical

deptt. Dr. Rajesh Kumar was the MOC for the event.

Dr. Gunjan Agarwal

HOD-ME

REPORT ON

GUEST LECTURE

ON

“INDUSTRIAL SAFETY AND GENERAL ENGINEERING”


Speaker Mr. Shashi Bhushan, Senior Engineer & Head TTK Prestige, ltd.

Date 21 February, 2018



year


welcome and introduction, Mr. Shashi Bhushan delivered his talk on “Industrial Safety and

General Engineering”.He explained types of common accidents prone areas in Industries and

common errors made by the workers/operators working on various machines. He discussed

various precautions to be taken care while working in the industries. Safety measures and

precautions must be written on the walls and near all the production units in industry. At last he

taught importance of maintenance and types of maintenance for the safety of machines and

workers working on these.


memento was also presented by Mr. Thomas Mathew, Senior Faculty member of Mechanical

deptt. Dr. Rajesh Kumar was the coordinator for the event.

Dr. Gunjan Agarwal

HOD-ME

REPORT ON

GUEST LECTURE

ON

“RECENT AND ADVANCED TECHNOLOGIES IN AUTOMOTIVE

RESEARCH”


Speaker Mr. Adarsh Srivastava, Head R&DMahindra & Mahindra Ltd.,

Haridwar,Uttarakhand

Date 17 March, 2018

Venue CE-105, Civil block


, 3rd

& 4th

year

A guest lecture was arranged for the students of B.Tech (ME), B.Tech (ME), 2nd

, 3rd

& 4th

year.

After the floral welcome and introduction by Dr. Rajesh Kumar, guest speaker Mr. Adarsh

Srivastavadelivered his talk on “Recent and Advanced Technologies in Automotive

Research”.He started his talk with current scenario of automotive industries. Advancement and

challenges faced by current automotive industries. Then he explain the company profile of M&M

Ltd. All the vehicles produced by the company were also explained. He taught assembly of and

their testing. Current and future emission norms were also explained by the guest speaker. He

also motivated the students to join automobile companies. Then he answered queries asked by

the students at the end of the lecture.


memento was also presented by Dr. Siddharth Jain, Associate Prof. in Mechanical deptt.

Dr. Gunjan Agarwal

HOD-ME

REPORT ON

GUEST LECTURE

ON

“SOLAR ASSISTED GROUND SOURCE HEAT PUMP SYSTEM FOR

SPACE HEATING AND COOLING”


Speaker Dr. Vikas Verma, Assistant Professor Department of Energy, Tezpur University,

Tezpur, Assam

Date 16 April,2018


Audience: B.Tech (ME), 3rd

& 4th

year


& 4th year. Dr. Vikas

Vermawas the speaker of event. After the floral welcome he delivered a lecture on “Solar

assisted ground source heat pump system for space heating and cooling”. He started his talk

with current scenario of global warming and energy requirement to fulfill the current need. Then

he taught global requirements of heating and cooling with respect to geographical locations.

Then taught basics of ground source heat pump, solar energy, solar radiation and its utilization.

Then he explained the working of Solar assisted ground source heat pump. The briefly explain

installation of GSHP, its testing procedure and methods of data analysis and error analysis. At

last he discussed some optimization techniques to be used for optimization of parameters.


memento was also presented by Mr. G C Mishra, Senior Faculty member of Mechanical deptt.


Dr. Gunjan Agarwal

HOD-ME

REPORT ON

GUEST LECTURE

ON

“RESEARCH METHODOLOGY”


Speaker Neo G. Alba-Baena, Professor Autonomous university of Ciudad Juarez

Date 08 June, 2018

Venue Conference hall

Audience: B.Tech (all), 3rd

& 4th

year, faculty members

A guest lecture was arranged for the students of B.Tech (all), 3rd

& 4th

year, faculty members.

After the floral welcome and introduction, Dr. Neo G. Alba-Baena delivered a lecture on

“Research methodology”.He started his talk about the research and its benefits. He discussed

various research methodology used in various field. He explained the procedure applying some

of the common research methodologies. He concluded his talk by discussing some of the

advanced tool like AI and machine learning.


memento was also presented by Dr. B M Singh, Dean Academics, COER.

Dr. Gunjan Agarwal

HOD-ME

Photographs

REPORT ON

GUEST LECTURE

ON

“MY TRYST WITH RESEARCH AND DEVELOPMENT USING CFD IN

STOL OPERATIONS AND IN FLOW BOILING HEAT TRANSFER”


Speaker Dr. MaharshiSubhash, Assistant Professor Graphic Era University

Date 27 August, 2018



& 4th

year


welcome and introduction, Dr. MaharshiSubhashdelivered his talk on “My Tryst with research

and development using CFD in STOL operations and in Flow boiling heat transfer”.He

started his talk by the concepts of fluid mechanics and heat transfer. Then he discussed energy

equations to be used for simulation. He discussed various problems for research in aviation field.

He explained various research papers published in the aviation field solved by various simulation

models. Use of Ansys software for the simulation was also discussed.

At the end of the lecture vote of thanks was given by Mr. G C MishraSenior Faculty member of

Mechanical deptt. A memento was also presented by Mr. Thomas Mathew, Senior Faculty

member of Mechanical deptt. Dr. Rajesh Kumar was the coordinator for the event.

Dr. Gunjan Agarwal

HOD-ME

PHOTOGRAPHS OF GUEST LECTURE

REPORT ON

GUEST LECTURE

ON

“POSITIVE ATTITUDE BUILDING”


Speaker Mr. Bahadur Bandopadhyay, AGM Ultra Tech Cement Ltd.


Venue Seminar hall, COER-SM

Audience: B.Tech (ME& PP), 1st, 2

nd&3

rdyear

A guest lecture was arranged for the students of B.Tech (ME & PP), 1st, 2nd & 3rd year. After

the floral welcome and introduction by Dr. Rajesh Kumar, guest speakerMr. Bahadur

Bandopadhyaydelivered his talk on “Positive Attitude Building”.He is a motivational speaker

having a vast experience of Industry. He motivated students by telling the importance of

discipline and hard work to get the success. He discussed various success stories of various

successful persons like Dhiru Bhai Ambani and Tata group of industries. At last he suggest the

students to take the help of meditation in daily life to be focused at their aim.


memento was also presented by Mr. G C Mishra, Associate Prof. in Mechanical deptt.

Dr. Gunjan Agarwal

HOD-ME

Photographs

REPORT ON

GUEST LECTURE

ON

“SOLAR THERMAL COLLECTOR”


Speaker Dr. TabishAlam, Scientist, CBRI, Dehradun




& 4th

year


& 4th year. Dr. TabishAlamwas

the speaker of event. After the floral welcome he delivered a lecture on “Solar thermal

collector”. He started his talk with current scenario of global warming and energy requirement to

fulfill the current demand. He taught basics of solar energy, solar radiation, its utilization and

storage. Then he explained the construction and working of solarcollector. The briefly explain

types of solar collectors, orientation and its testing procedure and methods of data analysis and

error analysis. At last he discussed themodelling of solar collector. He also explained a new

project of solar refrigerator.

At the end of the lecture vote of Thomas Mathew, Senior Faculty member of Mechanical deptt.


Dr. Gunjan Agarwal

HOD-ME

PHOTOGRAPHS

“advanced industrial automation technologies” › wp-content › uploads › 2020 › 02 ›...

Documents