any form of reproduction of this drawing in full or in
TRANSCRIPT
UP
UP
UP
LOOSE FIT LINE SSD BOUNDARY EXTENT OF FUTURE MEZZANINE TO BE DEMOLISHED SFS & SCG TITLE BOUNDARY OVERLAY
POP UP CARTS - SERVICE POINT
SOIL
LEGEND:
SP
PRINT IN COLOUR
ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR IN PART WITHOUT THE WRITTEN
© COPYRIGHT COX ARCHITECTURE PTY LTD
PERMISSION OF COX ARCHITECTURE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Scale:
Project No.
Nominated Architects
Cox Architecture Level 6, 155 Clarence Street, Sydney, NSW 2000, Australia
T + 61 2 9267 9599 F + 61 2 9264 5844
Consultants/Subcontractors
ADDRESS:
TEL/FAX:
WEBSITE:
EMAIL:
NAME:
T + 61 29465 5599
NOTES:
REFER TO SERVICE ENGINEER'S DRAWINGS FOR LOCATION OF S.D.F BOXES, GPO'S AND SKIRTING DUCTS. REFER TO SERVICES ENGINEER'S DRAWINGS FOR CO-ORDINATION OF SLAB & WALL 'BLOCKOUTS' AND 'CORED' PENETRATIONS.
REFER TO HYDRAULIC ENGINEER'S SERVICE PLAN FOR LOCATION OF SUB-FLOOR SERVICES.
REFER TO DOOR SCHEDULES FOR DOOR HARDWARE AND FURNITURE DETAILS. REFER TO MECHANICAL ENGINEER'S DRAWINGS AND SHOP DRAWINGS TO CONFIRM SIZES OF ALL DUCT PENETRATIONS AND LOUVRE OPENING SIZES.
REFER TO MECHANICAL ENGINEER'S DETAILS FOR PENETRATIONS AND BUILDING IN OF DUCTS, GRILLES, PLANT AND CEILING PLENUMS.
BUILD IN HIGH LEVEL OPENINGS FOR PLENUMS IN CEILING SPACES; REFER TO MECHANICAL ENGINEER'S DRAWING.
FOR ADDITIONAL SETOUT INFORMATION WHERE NO DIMENSIONING SHOWN, REFER TO REFERENCE TAGS FOR DETAILED ARCHITECTURAL DRAWINGS.
REFER TO ARCHITECTURAL SPECIFICATION, SCHEDULES AND ROOM DATA SHEETS FOR FF&E AND FINISHES CODES FOR FURTHER DETAIL AND OTHER MISCELLANEOUS ITEMS.
REFER TO THE FOLLOWING DRAWING SETS FOR SPECIFIC PACKAGE DETAIL AND INFORMATION:
AR14 SERIES- FIRE COMPARTMENTATION PLANS AR22 SERIES- CONCRETE OUTLINE PLANS AR23 SERIES- BOWL PLANS AR26 SERIES- REFLECTED CEILING PLANS
AR27 SERIES- FLOOR & WALL FINISHES PLANS AR28 SERIES- MASONRY & PARTITION PLANS AR29 SERIES- WATERPROOFING PLANS AR33 SERIES- FAÇADE CLADDING ELEVATIONS AR34 SERIES- PRECAST CLADDING ELEVATIONS AR35 SERIES- GLAZED PARTITION & SHOPFRONT GLAZING AR36 SERIES- ACOUSTIC/ENVIRONMENTAL SCREEN ELEVATIONS AR52 SERIES- BOWL DETAILS AR53 SERIES- CORE DETAILS AR54 SERIES- STAIR DETAILS AR59 SERIES- BALUSTRADE & BARRIER DETAILS
AR60 SERIES- FAÇADE DETAILS AR67 SERIES- WET AREAS DRAWINGS FOR ACCESS PANELS IN WET AREAS AR91 SERIES- WALL TYPE DETAILS
GENERAL NOTES- Sector Plans
1. DIMENSIONS IN RED INDICATE CRITICAL CLEAR WIDTH FROM FACE OF SURFACE OF WALL LINING OR ANY OTHER FIXTURE OR FITTING INSTALLED WITHIN THIS AREA. CLEAR WIDTHS MUST BE ADHERED TO ON SITE. 2. REFER TO SCHEDULES FOR FF&E AND FINISHES CODES 3. THE CONTRACTOR AND SUB-CONTRACTORS SHALL VERIFY ALL DIMENSIONS OF THIS DRAWING IN
RELATION TO EXISTING SITE CONDITIONS PRIOR TO ANY WORKS COMMENCING 4. FIGURED DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS 5. COPYRIGHT OF THIS DRAWING IS VESTED IN THE PRINCIPAL CONSULTANT 6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT SCHEDULES AND SPECIFICATIONS 7. REFER TO OTHER SPECIALIST CONSULTANTS DRAWINGS AND SCHEDULES FOR ALL OTHER DISCIPLINES 8. REFER CATERING CONSULTANT DRAWING FOR DETAILED LAYOUTS OF ALL KITCHENS, BAR AND FOOD OUTLETS. 9. REFER TO LANDSCAPE ARCHITECTS DRAWINGS FOR LEVELS, FINISHES AND EXTERNAL SERVICES LOCATIONS BEYOND THE BUILDING FAÇADE LINE. 10. FOR ADDITIONAL SETOUT INFORMATION FOR WET AREAS, CORES, ETC , REFER TO REFERENCE TAGS
FOR DETAILED ARCHITECTURAL DRAWINGS. 11. THE ARCHITECT TO BE NOTIFIED OF ANY DIMENSION DISCREPANCIES
STRUCTURE NOTES:
STRUCTURAL ELEMENTS SHOWN IN ARCHITECTURAL DRAWINGS ARE INDICATIVE ONLY AND INCLUDED FOR SPATIAL CO-ORDINATION PURPOSES ONLY.
FOR FULL STRUCTURAL DESIGN INCLUDING SUPERSTRUCTURE, BOWL STRUCTURE, SUBSTRUCTURE SIZES & DETAILS, SLAB SIZES & DETAILS, SUB-SOIL & SHORING DETAILS, COLUMN / STRUCTURAL WALL SIZES & DETAILS REFER STRUCTURAL ENGINEER'S REPORT.
FINAL ENGINEERING CONNECTIONS AND MEMBER TYPES TO MATCH ARCHITECTURAL INTENT.
Aurecon
T + 61 29699 7182
Document Control Status:
(02) 9267 9599
Rev Amendments Date
H
LOOSE FIT LINE SSD BOUNDARY EXTENT OF FUTURE MEZZANINE TO BE DEMOLISHED SFS & SCG TITLE BOUNDARY OVERLAY
POP UP CARTS - SERVICE POINT
SOIL
LEGEND:
SP
C2
C3
C4
C5
C6
WALL LOADING LEGEND:
Notes: ALLOW FOR SUB ROOF TO THE FOLLOWING ROOMS IN ORDER TO PROTECT EQUIPMENT AGAINST WET SERVICES ABOVE (WHERE APPLICABLE): - DAS, MCR, COMMS, MDF, GENERATOR, UPS, MAIN SWITCH, HV INTAKE SUB ROOF TO HAVE SPRINKLER PROTECTION OVER VOID SPACE. TO BE COORDINATED WITH STRUCTURAL ENGINEER AND SERVICES CONSULTANTS. REFER TO LANDSCAPE ARCHITECT'S DRAWINGS FOR LANDSCAPE LAYOUT, DETAILS AND DESIGN LOOSE FURNITURE SHOWN INDICATIVELY ONLY, NOT TO BE INCLUDED IN TENDER COSTING UNLESS INSTRUCTED OTHERWISE.
Notes: PODIUM LEVELS REQUIRE FURTHER COORDINATION. REFER TO LANDSCAPE ARCHITECT DRAWINGS FOR LATEST INFORMATION
PRINT IN COLOUR
ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR IN PART WITHOUT THE WRITTEN
© COPYRIGHT COX ARCHITECTURE PTY LTD
PERMISSION OF COX ARCHITECTURE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Scale:
Project No.
Nominated Architects
Cox Architecture Level 6, 155 Clarence Street, Sydney, NSW 2000, Australia
T + 61 2 9267 9599 F + 61 2 9264 5844
Consultants/Subcontractors
ADDRESS:
TEL/FAX:
WEBSITE:
EMAIL:
NAME:
T + 61 29465 5599
NOTES:
REFER TO SERVICE ENGINEER'S DRAWINGS FOR LOCATION OF S.D.F BOXES, GPO'S AND SKIRTING DUCTS. REFER TO SERVICES ENGINEER'S DRAWINGS FOR CO-ORDINATION OF SLAB & WALL 'BLOCKOUTS' AND 'CORED' PENETRATIONS.
REFER TO HYDRAULIC ENGINEER'S SERVICE PLAN FOR LOCATION OF SUB-FLOOR SERVICES.
REFER TO DOOR SCHEDULES FOR DOOR HARDWARE AND FURNITURE DETAILS. REFER TO MECHANICAL ENGINEER'S DRAWINGS AND SHOP DRAWINGS TO CONFIRM SIZES OF ALL DUCT PENETRATIONS AND LOUVRE OPENING SIZES.
REFER TO MECHANICAL ENGINEER'S DETAILS FOR PENETRATIONS AND BUILDING IN OF DUCTS, GRILLES, PLANT AND CEILING PLENUMS.
BUILD IN HIGH LEVEL OPENINGS FOR PLENUMS IN CEILING SPACES; REFER TO MECHANICAL ENGINEER'S DRAWING.
FOR ADDITIONAL SETOUT INFORMATION WHERE NO DIMENSIONING SHOWN, REFER TO REFERENCE TAGS FOR DETAILED ARCHITECTURAL DRAWINGS.
REFER TO ARCHITECTURAL SPECIFICATION, SCHEDULES AND ROOM DATA SHEETS FOR FF&E AND FINISHES CODES FOR FURTHER DETAIL AND OTHER MISCELLANEOUS ITEMS.
REFER TO THE FOLLOWING DRAWING SETS FOR SPECIFIC PACKAGE DETAIL AND INFORMATION:
AR14 SERIES- FIRE COMPARTMENTATION PLANS AR22 SERIES- CONCRETE OUTLINE PLANS AR23 SERIES- BOWL PLANS AR26 SERIES- REFLECTED CEILING PLANS
AR27 SERIES- FLOOR & WALL FINISHES PLANS AR28 SERIES- MASONRY & PARTITION PLANS AR29 SERIES- WATERPROOFING PLANS AR33 SERIES- FAÇADE CLADDING ELEVATIONS AR34 SERIES- PRECAST CLADDING ELEVATIONS AR35 SERIES- GLAZED PARTITION & SHOPFRONT GLAZING AR36 SERIES- ACOUSTIC/ENVIRONMENTAL SCREEN ELEVATIONS AR52 SERIES- BOWL DETAILS AR53 SERIES- CORE DETAILS AR54 SERIES- STAIR DETAILS AR59 SERIES- BALUSTRADE & BARRIER DETAILS
AR60 SERIES- FAÇADE DETAILS AR67 SERIES- WET AREAS DRAWINGS FOR ACCESS PANELS IN WET AREAS AR91 SERIES- WALL TYPE DETAILS
GENERAL NOTES- Sector Plans
1. DIMENSIONS IN RED INDICATE CRITICAL CLEAR WIDTH FROM FACE OF SURFACE OF WALL LINING OR ANY OTHER FIXTURE OR FITTING INSTALLED WITHIN THIS AREA. CLEAR WIDTHS MUST BE ADHERED TO ON SITE. 2. REFER TO SCHEDULES FOR FF&E AND FINISHES CODES 3. THE CONTRACTOR AND SUB-CONTRACTORS SHALL VERIFY ALL DIMENSIONS OF THIS DRAWING IN
RELATION TO EXISTING SITE CONDITIONS PRIOR TO ANY WORKS COMMENCING 4. FIGURED DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS 5. COPYRIGHT OF THIS DRAWING IS VESTED IN THE PRINCIPAL CONSULTANT 6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT SCHEDULES AND SPECIFICATIONS 7. REFER TO OTHER SPECIALIST CONSULTANTS DRAWINGS AND SCHEDULES FOR ALL OTHER DISCIPLINES 8. REFER CATERING CONSULTANT DRAWING FOR DETAILED LAYOUTS OF ALL KITCHENS, BAR AND FOOD OUTLETS. 9. REFER TO LANDSCAPE ARCHITECTS DRAWINGS FOR LEVELS, FINISHES AND EXTERNAL SERVICES LOCATIONS BEYOND THE BUILDING FAÇADE LINE. 10. FOR ADDITIONAL SETOUT INFORMATION FOR WET AREAS, CORES, ETC , REFER TO REFERENCE TAGS
FOR DETAILED ARCHITECTURAL DRAWINGS. 11. THE ARCHITECT TO BE NOTIFIED OF ANY DIMENSION DISCREPANCIES
STRUCTURE NOTES:
STRUCTURAL ELEMENTS SHOWN IN ARCHITECTURAL DRAWINGS ARE INDICATIVE ONLY AND INCLUDED FOR SPATIAL CO-ORDINATION PURPOSES ONLY.
FOR FULL STRUCTURAL DESIGN INCLUDING SUPERSTRUCTURE, BOWL STRUCTURE, SUBSTRUCTURE SIZES & DETAILS, SLAB SIZES & DETAILS, SUB-SOIL & SHORING DETAILS, COLUMN / STRUCTURAL WALL SIZES & DETAILS REFER STRUCTURAL ENGINEER'S REPORT.
FINAL ENGINEERING CONNECTIONS AND MEMBER TYPES TO MATCH ARCHITECTURAL INTENT.
Aurecon
T + 61 29699 7182
Document Control Status:
(02) 9267 9599
TOTAL: 1,150.20m²
Rev Amendments Date
11
13
15 16 17 18 19 20 21 22 23 24 25 26 27 28
30
32
HH
GG
ES
EE
10
12
14
31
33
29
E/W
FF
K
L
J
11
13
15 16 17 18 19 20 21 22 23 24 25 26 27 28
30
32
HH
GG
ES
EE
EN
10
12
14
31
33
29
E/W
K
L
J
204 m²
15 m²
FOOTY MANAGERS OFFICE
15 m²
OFFICE / SMALL MEET
76 m²
62 m²
37 m²
LAUNDRY
6 m² ACC
11 m² AIRLOCK
24 m² MEET 10 PAX
13 m² COMMS
7 m² AIRLOCK
17 m² ANALYSIS
POOLS PLANT 7 m²
SAUNA
25 m² MEDIA
389 m² GYM
19 m²
BOH SERVICE CORRIDOR
56 m²
EOT/ WNRL CHANGEROOM
DRAWERS WORKSTATION
DO UB
LE H
EI G
HT R
A IL
S FO
R JE
RS EY
S HA
NG ER
STORAGE UNDERNEATH AND ABOVE
PA PE
R TO
W EL
PA PE
R TO
W EL
BI N
BI N
2X SHOWERS
100' DROP DOWN SCREEN
75' TV 75' TV
100' DROP DOWN SCREEN
COOK TOP BENCH STORAGE
PRINT IN COLOUR
ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR IN PART WITHOUT THE WRITTEN
© COPYRIGHT COX ARCHITECTURE PTY LTD
PERMISSION OF COX ARCHITECTURE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Scale:
Project No.
Nominated Architects
Cox Architecture Level 6, 155 Clarence Street, Sydney, NSW 2000, Australia T + 61 2 9267 9599 F + 61 2 9264 5844
Consultants/Subcontractors
ADDRESS:
TEL/FAX:
WEBSITE:
EMAIL:
NAME:
116 Military Rd, Neutral Bay, NSW, 2089 T + 61 29465 5599
www.aurecongroup.com
NOTES:
REFER TO SERVICE ENGINEER'S DRAWINGS FOR LOCATION OF S.D.F BOXES, GPO'S AND SKIRTING DUCTS. REFER TO SERVICES ENGINEER'S DRAWINGS FOR CO-ORDINATION OF SLAB & WALL 'BLOCKOUTS' AND 'CORED' PENETRATIONS.
REFER TO HYDRAULIC ENGINEER'S SERVICE PLAN FOR LOCATION OF SUB-FLOOR SERVICES.
REFER TO DOOR SCHEDULES FOR DOOR HARDWARE AND FURNITURE DETAILS. REFER TO MECHANICAL ENGINEER'S DRAWINGS AND SHOP DRAWINGS TO CONFIRM SIZES OF ALL DUCT PENETRATIONS AND LOUVRE OPENING SIZES.
REFER TO MECHANICAL ENGINEER'S DETAILS FOR PENETRATIONS AND BUILDING IN OF DUCTS, GRILLES, PLANT AND CEILING PLENUMS.
BUILD IN HIGH LEVEL OPENINGS FOR PLENUMS IN CEILING SPACES; REFER TO MECHANICAL ENGINEER'S DRAWING.
FOR ADDITIONAL SETOUT INFORMATION WHERE NO DIMENSIONING SHOWN, REFER TO REFERENCE TAGS FOR DETAILED ARCHITECTURAL DRAWINGS.
REFER TO ARCHITECTURAL SPECIFICATION, SCHEDULES AND ROOM DATA SHEETS FOR FF&E AND FINISHES CODES FOR FURTHER DETAIL AND OTHER MISCELLANEOUS ITEMS.
GENERAL NOTES:
CONTRACTOR AND SUB-CONTRACTORS SHALL VERIFY ALL DIMENSIONS OF THIS DRAWING AND SITE CONDITIONS PRIOR TO ANY WORK COMMENCING.
ALL SHOP DRAWINGS SHALL BE SUBMITTED TO THE ARCHITECT, THE MANUFACTURER SHALL NOT COMMENCE ANY WORKS PRIOR TO THE RETURN OF APPROVED SHOP DRAWINGS SIGNED BY THE RELEVANT CONSULTANT.
FIGURED DIMENSIONS TAKE PRECEDENCE OVER SCALES DIMENSIONS.
THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT CONTRACTS, SPECIFICATIONS, DRAWINGS AND CONSULTANT DOCUMENTS.
COPYRIGHT OF THIS DRAWING IS VESTED IN THE PRINCIPAL
NOTE: ALL REVISIONS TO DRAWINGS WILL BE CLOUDED AND TAGGED
STRUCTURE NOTES:
STRUCTURAL ELEMENTS SHOWN IN ARCHITECTURAL DRAWINGS ARE INDICATIVE ONLY AND INCLUDED FOR SPATIAL CO-ORDINATION PURPOSES ONLY.
FOR FULL STRUCTURAL DESIGN INCLUDING SUPERSTRUCTURE, BOWL STRUCTURE, SUBSTRUCTURE SIZES & DETAILS, SLAB SIZES & DETAILS, SUB-SOIL & SHORING DETAILS, COLUMN / STRUCTURAL WALL SIZES & DETAILS REFER STRUCTURAL ENGINEER'S REPORT.
FINAL ENGINEERING CONNECTIONS AND MEMBER TYPES TO MATCH ARCHITECTURAL INTENT.
Aurecon
Level 1/78-80 George St, Redfern, NSW, 2016, Australia T + 61 29699 7182 www.aspect-studios.com
ASPECT Studios Pty Ltd
Document Control Status:
Author
RCoE-COX-03-DR-ASK0001
Checker
Designer
Approver
(02) 9267 9599
Architects
www.coxarchitecture.com.au
[email protected]
Rev Amendments Date 1 UG1 Feedback Issued for Information 29.01.2021 2 UG2 Feedback Issued for Information 05.02.2021 3 SD Issued for Information 15.02.2021 4 SD Issued for Information 19.02.2021 5 DD Issued for Information 28.04.2021 6 DD Approved Plans 06.05.2021 7 DD Issued for Information 14.05.2021
SCALE 1 : 200
SFS-COX-01-DR-A13.L1M.03[H].pdf (p.1)
SFS-COX-01-DR-A13.L5.06[E].pdf (p.2)
UP
UP
LOOSE FIT LINE SSD BOUNDARY EXTENT OF FUTURE MEZZANINE TO BE DEMOLISHED SFS & SCG TITLE BOUNDARY OVERLAY
POP UP CARTS - SERVICE POINT
SOIL
LEGEND:
SP
PRINT IN COLOUR
ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR IN PART WITHOUT THE WRITTEN
© COPYRIGHT COX ARCHITECTURE PTY LTD
PERMISSION OF COX ARCHITECTURE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Scale:
Project No.
Nominated Architects
Cox Architecture Level 6, 155 Clarence Street, Sydney, NSW 2000, Australia
T + 61 2 9267 9599 F + 61 2 9264 5844
Consultants/Subcontractors
ADDRESS:
TEL/FAX:
WEBSITE:
EMAIL:
NAME:
T + 61 29465 5599
NOTES:
REFER TO SERVICE ENGINEER'S DRAWINGS FOR LOCATION OF S.D.F BOXES, GPO'S AND SKIRTING DUCTS. REFER TO SERVICES ENGINEER'S DRAWINGS FOR CO-ORDINATION OF SLAB & WALL 'BLOCKOUTS' AND 'CORED' PENETRATIONS.
REFER TO HYDRAULIC ENGINEER'S SERVICE PLAN FOR LOCATION OF SUB-FLOOR SERVICES.
REFER TO DOOR SCHEDULES FOR DOOR HARDWARE AND FURNITURE DETAILS. REFER TO MECHANICAL ENGINEER'S DRAWINGS AND SHOP DRAWINGS TO CONFIRM SIZES OF ALL DUCT PENETRATIONS AND LOUVRE OPENING SIZES.
REFER TO MECHANICAL ENGINEER'S DETAILS FOR PENETRATIONS AND BUILDING IN OF DUCTS, GRILLES, PLANT AND CEILING PLENUMS.
BUILD IN HIGH LEVEL OPENINGS FOR PLENUMS IN CEILING SPACES; REFER TO MECHANICAL ENGINEER'S DRAWING.
FOR ADDITIONAL SETOUT INFORMATION WHERE NO DIMENSIONING SHOWN, REFER TO REFERENCE TAGS FOR DETAILED ARCHITECTURAL DRAWINGS.
REFER TO ARCHITECTURAL SPECIFICATION, SCHEDULES AND ROOM DATA SHEETS FOR FF&E AND FINISHES CODES FOR FURTHER DETAIL AND OTHER MISCELLANEOUS ITEMS.
REFER TO THE FOLLOWING DRAWING SETS FOR SPECIFIC PACKAGE DETAIL AND INFORMATION:
AR14 SERIES- FIRE COMPARTMENTATION PLANS AR22 SERIES- CONCRETE OUTLINE PLANS AR23 SERIES- BOWL PLANS AR26 SERIES- REFLECTED CEILING PLANS
AR27 SERIES- FLOOR & WALL FINISHES PLANS AR28 SERIES- MASONRY & PARTITION PLANS AR29 SERIES- WATERPROOFING PLANS AR33 SERIES- FAÇADE CLADDING ELEVATIONS AR34 SERIES- PRECAST CLADDING ELEVATIONS AR35 SERIES- GLAZED PARTITION & SHOPFRONT GLAZING AR36 SERIES- ACOUSTIC/ENVIRONMENTAL SCREEN ELEVATIONS AR52 SERIES- BOWL DETAILS AR53 SERIES- CORE DETAILS AR54 SERIES- STAIR DETAILS AR59 SERIES- BALUSTRADE & BARRIER DETAILS
AR60 SERIES- FAÇADE DETAILS AR67 SERIES- WET AREAS DRAWINGS FOR ACCESS PANELS IN WET AREAS AR91 SERIES- WALL TYPE DETAILS
GENERAL NOTES- Sector Plans
1. DIMENSIONS IN RED INDICATE CRITICAL CLEAR WIDTH FROM FACE OF SURFACE OF WALL LINING OR ANY OTHER FIXTURE OR FITTING INSTALLED WITHIN THIS AREA. CLEAR WIDTHS MUST BE ADHERED TO ON SITE. 2. REFER TO SCHEDULES FOR FF&E AND FINISHES CODES 3. THE CONTRACTOR AND SUB-CONTRACTORS SHALL VERIFY ALL DIMENSIONS OF THIS DRAWING IN
RELATION TO EXISTING SITE CONDITIONS PRIOR TO ANY WORKS COMMENCING 4. FIGURED DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS 5. COPYRIGHT OF THIS DRAWING IS VESTED IN THE PRINCIPAL CONSULTANT 6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT SCHEDULES AND SPECIFICATIONS 7. REFER TO OTHER SPECIALIST CONSULTANTS DRAWINGS AND SCHEDULES FOR ALL OTHER DISCIPLINES 8. REFER CATERING CONSULTANT DRAWING FOR DETAILED LAYOUTS OF ALL KITCHENS, BAR AND FOOD OUTLETS. 9. REFER TO LANDSCAPE ARCHITECTS DRAWINGS FOR LEVELS, FINISHES AND EXTERNAL SERVICES LOCATIONS BEYOND THE BUILDING FAÇADE LINE. 10. FOR ADDITIONAL SETOUT INFORMATION FOR WET AREAS, CORES, ETC , REFER TO REFERENCE TAGS
FOR DETAILED ARCHITECTURAL DRAWINGS. 11. THE ARCHITECT TO BE NOTIFIED OF ANY DIMENSION DISCREPANCIES
STRUCTURE NOTES:
STRUCTURAL ELEMENTS SHOWN IN ARCHITECTURAL DRAWINGS ARE INDICATIVE ONLY AND INCLUDED FOR SPATIAL CO-ORDINATION PURPOSES ONLY.
FOR FULL STRUCTURAL DESIGN INCLUDING SUPERSTRUCTURE, BOWL STRUCTURE, SUBSTRUCTURE SIZES & DETAILS, SLAB SIZES & DETAILS, SUB-SOIL & SHORING DETAILS, COLUMN / STRUCTURAL WALL SIZES & DETAILS REFER STRUCTURAL ENGINEER'S REPORT.
FINAL ENGINEERING CONNECTIONS AND MEMBER TYPES TO MATCH ARCHITECTURAL INTENT.
Aurecon
T + 61 29699 7182
Document Control Status:
(02) 9267 9599
Rev Amendments Date
H
LOOSE FIT LINE SSD BOUNDARY EXTENT OF FUTURE MEZZANINE TO BE DEMOLISHED SFS & SCG TITLE BOUNDARY OVERLAY
POP UP CARTS - SERVICE POINT
SOIL
LEGEND:
SP
C2
C3
C4
C5
C6
WALL LOADING LEGEND:
Notes: ALLOW FOR SUB ROOF TO THE FOLLOWING ROOMS IN ORDER TO PROTECT EQUIPMENT AGAINST WET SERVICES ABOVE (WHERE APPLICABLE): - DAS, MCR, COMMS, MDF, GENERATOR, UPS, MAIN SWITCH, HV INTAKE SUB ROOF TO HAVE SPRINKLER PROTECTION OVER VOID SPACE. TO BE COORDINATED WITH STRUCTURAL ENGINEER AND SERVICES CONSULTANTS. REFER TO LANDSCAPE ARCHITECT'S DRAWINGS FOR LANDSCAPE LAYOUT, DETAILS AND DESIGN LOOSE FURNITURE SHOWN INDICATIVELY ONLY, NOT TO BE INCLUDED IN TENDER COSTING UNLESS INSTRUCTED OTHERWISE.
Notes: PODIUM LEVELS REQUIRE FURTHER COORDINATION. REFER TO LANDSCAPE ARCHITECT DRAWINGS FOR LATEST INFORMATION
PRINT IN COLOUR
ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR IN PART WITHOUT THE WRITTEN
© COPYRIGHT COX ARCHITECTURE PTY LTD
PERMISSION OF COX ARCHITECTURE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Scale:
Project No.
Nominated Architects
Cox Architecture Level 6, 155 Clarence Street, Sydney, NSW 2000, Australia
T + 61 2 9267 9599 F + 61 2 9264 5844
Consultants/Subcontractors
ADDRESS:
TEL/FAX:
WEBSITE:
EMAIL:
NAME:
T + 61 29465 5599
NOTES:
REFER TO SERVICE ENGINEER'S DRAWINGS FOR LOCATION OF S.D.F BOXES, GPO'S AND SKIRTING DUCTS. REFER TO SERVICES ENGINEER'S DRAWINGS FOR CO-ORDINATION OF SLAB & WALL 'BLOCKOUTS' AND 'CORED' PENETRATIONS.
REFER TO HYDRAULIC ENGINEER'S SERVICE PLAN FOR LOCATION OF SUB-FLOOR SERVICES.
REFER TO DOOR SCHEDULES FOR DOOR HARDWARE AND FURNITURE DETAILS. REFER TO MECHANICAL ENGINEER'S DRAWINGS AND SHOP DRAWINGS TO CONFIRM SIZES OF ALL DUCT PENETRATIONS AND LOUVRE OPENING SIZES.
REFER TO MECHANICAL ENGINEER'S DETAILS FOR PENETRATIONS AND BUILDING IN OF DUCTS, GRILLES, PLANT AND CEILING PLENUMS.
BUILD IN HIGH LEVEL OPENINGS FOR PLENUMS IN CEILING SPACES; REFER TO MECHANICAL ENGINEER'S DRAWING.
FOR ADDITIONAL SETOUT INFORMATION WHERE NO DIMENSIONING SHOWN, REFER TO REFERENCE TAGS FOR DETAILED ARCHITECTURAL DRAWINGS.
REFER TO ARCHITECTURAL SPECIFICATION, SCHEDULES AND ROOM DATA SHEETS FOR FF&E AND FINISHES CODES FOR FURTHER DETAIL AND OTHER MISCELLANEOUS ITEMS.
REFER TO THE FOLLOWING DRAWING SETS FOR SPECIFIC PACKAGE DETAIL AND INFORMATION:
AR14 SERIES- FIRE COMPARTMENTATION PLANS AR22 SERIES- CONCRETE OUTLINE PLANS AR23 SERIES- BOWL PLANS AR26 SERIES- REFLECTED CEILING PLANS
AR27 SERIES- FLOOR & WALL FINISHES PLANS AR28 SERIES- MASONRY & PARTITION PLANS AR29 SERIES- WATERPROOFING PLANS AR33 SERIES- FAÇADE CLADDING ELEVATIONS AR34 SERIES- PRECAST CLADDING ELEVATIONS AR35 SERIES- GLAZED PARTITION & SHOPFRONT GLAZING AR36 SERIES- ACOUSTIC/ENVIRONMENTAL SCREEN ELEVATIONS AR52 SERIES- BOWL DETAILS AR53 SERIES- CORE DETAILS AR54 SERIES- STAIR DETAILS AR59 SERIES- BALUSTRADE & BARRIER DETAILS
AR60 SERIES- FAÇADE DETAILS AR67 SERIES- WET AREAS DRAWINGS FOR ACCESS PANELS IN WET AREAS AR91 SERIES- WALL TYPE DETAILS
GENERAL NOTES- Sector Plans
1. DIMENSIONS IN RED INDICATE CRITICAL CLEAR WIDTH FROM FACE OF SURFACE OF WALL LINING OR ANY OTHER FIXTURE OR FITTING INSTALLED WITHIN THIS AREA. CLEAR WIDTHS MUST BE ADHERED TO ON SITE. 2. REFER TO SCHEDULES FOR FF&E AND FINISHES CODES 3. THE CONTRACTOR AND SUB-CONTRACTORS SHALL VERIFY ALL DIMENSIONS OF THIS DRAWING IN
RELATION TO EXISTING SITE CONDITIONS PRIOR TO ANY WORKS COMMENCING 4. FIGURED DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS 5. COPYRIGHT OF THIS DRAWING IS VESTED IN THE PRINCIPAL CONSULTANT 6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT SCHEDULES AND SPECIFICATIONS 7. REFER TO OTHER SPECIALIST CONSULTANTS DRAWINGS AND SCHEDULES FOR ALL OTHER DISCIPLINES 8. REFER CATERING CONSULTANT DRAWING FOR DETAILED LAYOUTS OF ALL KITCHENS, BAR AND FOOD OUTLETS. 9. REFER TO LANDSCAPE ARCHITECTS DRAWINGS FOR LEVELS, FINISHES AND EXTERNAL SERVICES LOCATIONS BEYOND THE BUILDING FAÇADE LINE. 10. FOR ADDITIONAL SETOUT INFORMATION FOR WET AREAS, CORES, ETC , REFER TO REFERENCE TAGS
FOR DETAILED ARCHITECTURAL DRAWINGS. 11. THE ARCHITECT TO BE NOTIFIED OF ANY DIMENSION DISCREPANCIES
STRUCTURE NOTES:
STRUCTURAL ELEMENTS SHOWN IN ARCHITECTURAL DRAWINGS ARE INDICATIVE ONLY AND INCLUDED FOR SPATIAL CO-ORDINATION PURPOSES ONLY.
FOR FULL STRUCTURAL DESIGN INCLUDING SUPERSTRUCTURE, BOWL STRUCTURE, SUBSTRUCTURE SIZES & DETAILS, SLAB SIZES & DETAILS, SUB-SOIL & SHORING DETAILS, COLUMN / STRUCTURAL WALL SIZES & DETAILS REFER STRUCTURAL ENGINEER'S REPORT.
FINAL ENGINEERING CONNECTIONS AND MEMBER TYPES TO MATCH ARCHITECTURAL INTENT.
Aurecon
T + 61 29699 7182
Document Control Status:
(02) 9267 9599
TOTAL: 1,150.20m²
Rev Amendments Date
11
13
15 16 17 18 19 20 21 22 23 24 25 26 27 28
30
32
HH
GG
ES
EE
10
12
14
31
33
29
E/W
FF
K
L
J
11
13
15 16 17 18 19 20 21 22 23 24 25 26 27 28
30
32
HH
GG
ES
EE
EN
10
12
14
31
33
29
E/W
K
L
J
204 m²
15 m²
FOOTY MANAGERS OFFICE
15 m²
OFFICE / SMALL MEET
76 m²
62 m²
37 m²
LAUNDRY
6 m² ACC
11 m² AIRLOCK
24 m² MEET 10 PAX
13 m² COMMS
7 m² AIRLOCK
17 m² ANALYSIS
POOLS PLANT 7 m²
SAUNA
25 m² MEDIA
389 m² GYM
19 m²
BOH SERVICE CORRIDOR
56 m²
EOT/ WNRL CHANGEROOM
DRAWERS WORKSTATION
DO UB
LE H
EI G
HT R
A IL
S FO
R JE
RS EY
S HA
NG ER
STORAGE UNDERNEATH AND ABOVE
PA PE
R TO
W EL
PA PE
R TO
W EL
BI N
BI N
2X SHOWERS
100' DROP DOWN SCREEN
75' TV 75' TV
100' DROP DOWN SCREEN
COOK TOP BENCH STORAGE
PRINT IN COLOUR
ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR IN PART WITHOUT THE WRITTEN
© COPYRIGHT COX ARCHITECTURE PTY LTD
PERMISSION OF COX ARCHITECTURE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Scale:
Project No.
Nominated Architects
Cox Architecture Level 6, 155 Clarence Street, Sydney, NSW 2000, Australia T + 61 2 9267 9599 F + 61 2 9264 5844
Consultants/Subcontractors
ADDRESS:
TEL/FAX:
WEBSITE:
EMAIL:
NAME:
116 Military Rd, Neutral Bay, NSW, 2089 T + 61 29465 5599
www.aurecongroup.com
NOTES:
REFER TO SERVICE ENGINEER'S DRAWINGS FOR LOCATION OF S.D.F BOXES, GPO'S AND SKIRTING DUCTS. REFER TO SERVICES ENGINEER'S DRAWINGS FOR CO-ORDINATION OF SLAB & WALL 'BLOCKOUTS' AND 'CORED' PENETRATIONS.
REFER TO HYDRAULIC ENGINEER'S SERVICE PLAN FOR LOCATION OF SUB-FLOOR SERVICES.
REFER TO DOOR SCHEDULES FOR DOOR HARDWARE AND FURNITURE DETAILS. REFER TO MECHANICAL ENGINEER'S DRAWINGS AND SHOP DRAWINGS TO CONFIRM SIZES OF ALL DUCT PENETRATIONS AND LOUVRE OPENING SIZES.
REFER TO MECHANICAL ENGINEER'S DETAILS FOR PENETRATIONS AND BUILDING IN OF DUCTS, GRILLES, PLANT AND CEILING PLENUMS.
BUILD IN HIGH LEVEL OPENINGS FOR PLENUMS IN CEILING SPACES; REFER TO MECHANICAL ENGINEER'S DRAWING.
FOR ADDITIONAL SETOUT INFORMATION WHERE NO DIMENSIONING SHOWN, REFER TO REFERENCE TAGS FOR DETAILED ARCHITECTURAL DRAWINGS.
REFER TO ARCHITECTURAL SPECIFICATION, SCHEDULES AND ROOM DATA SHEETS FOR FF&E AND FINISHES CODES FOR FURTHER DETAIL AND OTHER MISCELLANEOUS ITEMS.
GENERAL NOTES:
CONTRACTOR AND SUB-CONTRACTORS SHALL VERIFY ALL DIMENSIONS OF THIS DRAWING AND SITE CONDITIONS PRIOR TO ANY WORK COMMENCING.
ALL SHOP DRAWINGS SHALL BE SUBMITTED TO THE ARCHITECT, THE MANUFACTURER SHALL NOT COMMENCE ANY WORKS PRIOR TO THE RETURN OF APPROVED SHOP DRAWINGS SIGNED BY THE RELEVANT CONSULTANT.
FIGURED DIMENSIONS TAKE PRECEDENCE OVER SCALES DIMENSIONS.
THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL RELEVANT CONTRACTS, SPECIFICATIONS, DRAWINGS AND CONSULTANT DOCUMENTS.
COPYRIGHT OF THIS DRAWING IS VESTED IN THE PRINCIPAL
NOTE: ALL REVISIONS TO DRAWINGS WILL BE CLOUDED AND TAGGED
STRUCTURE NOTES:
STRUCTURAL ELEMENTS SHOWN IN ARCHITECTURAL DRAWINGS ARE INDICATIVE ONLY AND INCLUDED FOR SPATIAL CO-ORDINATION PURPOSES ONLY.
FOR FULL STRUCTURAL DESIGN INCLUDING SUPERSTRUCTURE, BOWL STRUCTURE, SUBSTRUCTURE SIZES & DETAILS, SLAB SIZES & DETAILS, SUB-SOIL & SHORING DETAILS, COLUMN / STRUCTURAL WALL SIZES & DETAILS REFER STRUCTURAL ENGINEER'S REPORT.
FINAL ENGINEERING CONNECTIONS AND MEMBER TYPES TO MATCH ARCHITECTURAL INTENT.
Aurecon
Level 1/78-80 George St, Redfern, NSW, 2016, Australia T + 61 29699 7182 www.aspect-studios.com
ASPECT Studios Pty Ltd
Document Control Status:
Author
RCoE-COX-03-DR-ASK0001
Checker
Designer
Approver
(02) 9267 9599
Architects
www.coxarchitecture.com.au
[email protected]
Rev Amendments Date 1 UG1 Feedback Issued for Information 29.01.2021 2 UG2 Feedback Issued for Information 05.02.2021 3 SD Issued for Information 15.02.2021 4 SD Issued for Information 19.02.2021 5 DD Issued for Information 28.04.2021 6 DD Approved Plans 06.05.2021 7 DD Issued for Information 14.05.2021
SCALE 1 : 200
SFS-COX-01-DR-A13.L1M.03[H].pdf (p.1)
SFS-COX-01-DR-A13.L5.06[E].pdf (p.2)