antenna systems & accessories...dxe-7580-thk cw optimizer capacity hat.....$59.95 80 meter with...

Mail: P.O. Box 1491, Akron, OH 44309 • E-Mail: [email protected] • Web: DXEngineering.com 21

COMTEK SYSTEMS PVS-2 Two-Element Phased Vertical SystemsFor those who do not have space for a Four-Square phased vertical array, COMTEKSYSTEMS offers the superior PVS-2 two-element phased vertical system. Quality components are used throughout, yet the system is very affordable. • Three direction switching includes selectable end-fire and broadside directions• Typical 18 dB front-to-back rejection and 3 dB gain• Rated at 3 kW continuous Amateur Service duty • <.05 dB insertion loss • Includes MOVs for maximum ESD protection • Amphenol silver tip SO-239s and Potter & Brumfield relays• Includes a custom, in-house wound UNUN and a 90 degree toroid • A 4-conductor control line is requiredCOM-PVS-160-1 160m Phased Vertical System, 115 Vac...............................$333.95COM-PVS-160-2 160m Phased Vertical System, 230 Vac...............................$348.95COM-PVS-80-1 80m Phased Vertical System, 115 Vac...............................$333.95COM-PVS-80-2 80m Phased Vertical System, 230 Vac...............................$348.95COM-PVS-40-1 40m Phased Vertical System, 115 Vac...............................$333.95COM-PVS-40-2 40m Phased Vertical System, 230 Vac...............................$348.95COM-PVS-30-1 30m Phased Vertical System, 115 Vac...............................$333.95COM-PVS-30-2 30m Phased Vertical System, 230 Vac...............................$348.95COM-PVS-20-1 30m Phased Vertical System, 115 Vac...............................$333.95COM-PVS-20-2 30m Phased Vertical System, 230 Vac...............................$348.95AccessoriesCOM-P213-160-P RG-213 Phasing Cable, 160m, set of 2..............................$189.95COM-P213-80-P RG-213 Phasing Cable, 80m, set of 2 ................................$119.95COM-P213-40-P RG-213 Phasing Cable, 40m, set of 2 ..................................$89.95COM-P213-30-P RG-213 Phasing Cable, 30m, set of 2 ..................................$69.95COM-P213-20-P RG-213 Phasing Cable, 20m, set of 2 ..................................$59.95COM-CW4 4-Conductor Control Cable .......................................per foot $0.28

The Experts in PhasedAntenna Systems!COMTEK SYSTEMS Hybrids are used worldwideby serious contesters, DXers, and hams. With properly installed arrays and our hybridcouplers, you can achieve gain and impressiveF/B at a lower cost than most low band beamsat proper heights.Vertical antenna arrays offer inherently betterDX performance than common horizontal antennas. COMTEK SYSTEMS knows how toprovide optimum performance from phasedantenna arrays. Stacked horizontal arrays can be combined for selective vertical angleswitching. Combined with DX Engineering quality and technical support, you are assuredthat your engineered system will deliver top results.

COMTEK SYSTEMS Antenna SwitchesSTACK-2 Yagi Antenna SwitchNew, affordable, 2-high stack switch for tribanders, log periodics, or monobanders from 40 to 10 meters. Amphenol silver tip connectors, MOVs (a COMTEK SYSTEMS standard since 1994), Potter & Brumfield relays, and a 2.4" O.D. UNUN provide reliability at 3 kW maximum power levels. Simply run two equal lengths of 50 Ω coax from the switch to each antenna and a 3-conductor control line and enjoy increased performance in contests or chasing DX. COM-STACK-2-A 2-Stack Antenna Switch System,

12 Vdc ................................$259.95COM-CW4 4-Conductor

Control Cable.............per foot $0.28Stack-3 Stacked Yagi SwitchBased on K3LR’s design, the SYS-3 is designed for monoband 3-stack Yagis. You canselect any one antenna, all antennas, or any combination of two antennas. Indicator lightsfor each antenna tell you at a glance which antennas are selected. Features include a double-sided printed circuit board, Amphenol SO-239s, and MOV protection for all six control cable lines. The SYS-3 incorporates the same USA-made, gold-plated DPDT relaysused in COMTEK SYSTEM’s ACB-4 Series Hybrid Phasing Systems, proven in hundreds ofsystems since 1990. COM-STACK-3-A 3-Stack Yagi Switch System, 12 Vdc .....................................$399.95DXE-CW9S 9-Conductor Control Cable ...........................................per foot $0.3650 and 75 ΩΩChoke BalunsChoke baluns ensure that RF does not flow on the outside shield of feedlines, phasing lines, etc. COMTEK SYSTEMS’ baluns feature 100 Amidon beads on a length of RG-400 Teflon®

double-shielded silver coax terminated with Silver Teflon PL-259 UHF connectors. Assembled baluns are covered with 3M heat shrink tubing. RF bead kits areavailable if you wish to assemble your own chokes.COM-CFC-50 50 Ω Balun, assembled ............................................................$93.90COM-CFC-50K 50 Ω Balun, kit ..........................................................................$72.85COM-CFC-75 75 Ω Balun, assembled.............................................................$95.90COM-CFC-75K 75 Ω Balun, kit ..........................................................................$74.85COM-RFB-160 RF Choke Bead Kit, 160m.......................................................$124.90COM-RFB-80 RF Choke Bead Kit, 80m...........................................................$64.80COM-RFB-40 RF Choke Bead Kit, 30 and 40m...............................................$47.95COM-RFB-20 RF Choke Bead Kit, 10, 15 and 20m ........................................$38.95AccessoriesDXE-RADP-1P Stainless Steel Radial Plate with 20 bolt sets...........................$49.50DXE-SSVC-2P V-Saddle Clamp, fits 1" to 2" tube.............................................$11.95

VFA-1 Vertical Feedpoint AssemblyThe VFA-1 Vertical Feedpoint Assembly for vertical antennas eases the task of attaching a coaxial cable to your aluminum tubing. Silver SO-239s and stainless hardware ensure long life and reliability. The assembly is available in a set of four for 4-square arrays.COM-VFA-1 Vertical Feedpoint Assembly ....$15.95COM-VFA-4 Vertical Feedpoint Assembly,

set of 4 .....................................$15.95AccessoriesCOM-CW3 Control Wire,

3-conductor ..................per foot $0.25COM-CW4 Control Wire,

4-conductor ..................per foot $0.28COM-CW6 Control Wire,

6-conductor ..................per foot $0.36

See Page 22 for Value-Priced Antenna Packages!

Antenna Systems & Accessories

DXE_HamCat11_p1-29 4/27/11 2:17 PM Page 21

Phone: 800.777.0703 • International: 330.572.3200 • Fax: 330.572.3279 • DoD CAGE Code: 3M3H722

Introducing a new series of high-performance HF vertical antennas with DX Engineering THUNDERBOLT™ antenna technology! Models include monoband and multi-band verticals utilizing both fast taper 3-foot tubing sections for lowest wind resistance and slow taper 6-foot tubing sections for greatest bandwidth. Designed with corrosion-resistant 6063 aluminum tubing and stainless steel hardware, these antennas are both durable and attractive. The fast taper models can be shipped affordably via postal service.The DX Engineering Multi-Band HF antennas are high-performance vertical antenna systemsdesigned with engineering excellence and performance in mind. Three models are available tooperate over the entire 160 through 10 meter range, or 80 through 10 meters with an optionalDX Engineering UNUN and your wide range antenna tuner.Various monoband models are available to operate over an entire band with an SWR of less than 1.5:1. They can be made multi-band-capable with optional DX Engineering accessories. Our antennas offer fullsize quarter wave performance! All models feature the market’s strongestEstren® insulator that won’t crack, peel, splinter, or fail.

AUTO TUNE43 FEET90 MPHNO GUYS

80/40 DUAL BAND55 FEET—NO GUYS

BIG SIGNAL

5KW TRAP

$57900

Includes

Auto-Tuner

Dual Band

$69495

75/80 Meter

$54995

Ante

nnas

& A

cces

sorie

s

DDXX EEnnggiinneeeerriinngg VVeerrttiiccaallss——HHiigghh PPeerrffoorrmmaannccee//LLooww CCoosstt!!

DXE-MBVE-1-3ATP

THUNDERBOLT™ Dual Band High Performance Vertical Antennas

80/40 Meters• Full band coverage on 40 and 300 kHz on 80 meters with SWR under 2:1—

no outboard tuner needed• Tunable above and below 7 MHz range for MARS and CAP frequencies• Maximum legal power handling• Optimum 53 ft. overall height• Self-supporting design withstands 50 MPH wind without guying-easy raising and lowering with optional winch kitDXE-8040VA-1 Antenna...................................................................................$694.95DXE-VRW-1 Manual Winch Kit....................................................................$169.99DXE-7580-THK CW Optimizer Capacity Hat .......................................................$59.95DXE-8040-30AOK* 30 Meter Add-On Kit ...............................................................$129.95

*$99.95 if purchased with antenna

40/30 Meters• Full band coverage on 40 and 30 meters with SWR under 1.5:1—no tuner needed• 40m bandwidth greater than 750 kHz with SWR under 2:1• Tunable above and below 7 MHz range for MARS and CAP frequencies• Maximum legal power handling• Optimum 30 ft. overall height• Self-supporting design withstands 60 MPH wind without guyingDXE-4030VA-1 ...............................................................................................$199.95

THUNDERBOLT™ Single Band High Performance Vertical Antennas

80/75 Meters• 300 kHz bandwidth with SWR under 2:1—no outboard tuner needed• Tunable for CW or SSB—change base coil tap for segment• Maximum legal power handling• Optimum 53 ft. overall height• Self-supporting design withstands 50 MPH wind without guying—

easy raising and lowering with optional winch kitDXE-7580VA-1 Antenna..........................................................................................$549.95DXE-VRW-1 Manual Winch Kit ..........................................................................$169.99DXE-7580-THK CW Optimizer Capacity Hat..............................................................$59.95

80 Meter with Performance-Enhancing Top Hat• Slow taper, 43 ft. vertical radiator• 6063 T832 corrosion-resistant aircraft aluminum tubing and stainless steel hardware• 12 ft. diameter capacity hat—resonant on 3.5-4.0 MHz• Thick stainless steel tilt base• 300 kHz wide below 2:1 SWR• No coils or linear loading elements• 5 kW continuous/10kW CW/SSB rating• Includes impedance matching networkDXE-80VA-3................................................................................................................$349.95DXE-GUY400-KIT Guying Kit........................................................................................$54.95

60 Meter Full Size• Slow taper, 43 ft. vertical radiator• Thick stainless steel tilt base• Full 60 meter coverage with SWR of 1.5 or less• No coils or linear loading elements• Easily upgradeable to DXE-80VA-3 for 75/80 meter monoband operation• Includes impedance matching network• 6063 T832 corrosion-resistant aircraft aluminum tubing and stainless steel hardwareDXE-60VA-1P..............................................................................................................$259.50DXE-GUY400-KIT Guying Kit........................................................................................$54.95

THUNDERBOLT™ Multi-Band High Performance Vertical Antenna (Tuner Required)

160 to 10 Meters• Slow taper, heavy duty tubing—optimal 43 ft. vertical radiator• 6063 T832 corrosion-resistant aircraft aluminum tubing and stainless steel hardware• Easy tuning design• No coils or linear loading elements• Thick stainless steel tilt base• 5 kW continuous/10kW CW/SSB rating• Includes special DXE-UN-43 UNUN for multi-band use

with your wide range tuner• Easily upgradeable to DXE-80VA-3 for 75/80 meter

monoband operationDXE-MBVA-1UP..........................................................................................................$299.95DXE-GUY400-KIT Guying Kit........................................................................................$54.95

DXE_HamCat11_p1-29 4/27/11 2:17 PM 2

For more COMTEK SYSTEMS Productsvisit www.ComtekSystems.com


Antennas & Accessories

COMTEK SYSTEMS Vertical Antennas and ArraysThese rugged, affordable quarter wave antennasare designed to be used in sets to provide top performance with phased vertical array systemslike the Comtek PVS 2-antenna systems or Comtekand DXE Four Square array controllers. The COM-20VA antenna can be used on any singleband—20, 17, 15, 12 or 10 meters—by adjustingits length.Constructed from 6063 aircraft-spec aluminum tubing, these antenna taperfrom a huge base section. High strength, UV-resistant EXTREN® insulatorsand a heavy aluminum plate mounting base ensure long lasting, reliable performance under adverse conditions. The antennas come with V-saddleclamps for installation to your ground-mounted pipe; 2" O.D. pipe is recommended, but the clamps will accept any size from 1" to 2". Stainlesssteel hardware included. Light guying is always recommended for phasedsystems to keep spacing precise and minimize swaying.COM-20VA 20 Meter Vertical Antenna.............................$99.95COM-20VA-2P 20 Meter Vertical Antenna, set of 2 ............$194.95COM-20VA-4P 20 Meter Vertical Antenna, set of 4 ...........$384.95COM-30VA 30 Meter Vertical Antenna ..........................$144.95COM-30VA-2P 30 Meter Vertical Antenna, set of 2 ............$284.95COM-30VA-4P 30 Meter Vertical Antenna, set of 4 ............$589.95COM-40VA 40 Meter Vertical Antenna ..........................$159.95COM-40VA-2P 40 Meter Vertical Antenna, set of 2 ............$309.95COM-40VA-4P 40 Meter Vertical Antenna, set of 4 ............$609.95See page 34 for Radial Plates and Radial Wire Kits to complete your antenna installation.

TThhee EExxppeerrttss iinn PPhhaasseedd AAnntteennnnaa SSyysstteemmss!!

Standard Multi-Band High Performance Vertical Antennas(Tuner Required)

2 1/8" to 3/8" Fast Taper, 160 to 10 Meters • 43 ft. optimal length vertical radiator• Easy tuning design—correct length and taper• Thick stainless steel tilt base• No coils or linear loading elements• Requires DXE-UN-43 UNUN Balun for multi-band use with your wide range tunerDXE-MBVE-1...............................................................................................................$194.95DXE-GUY400-KIT Guying Kit........................................................................................$54.95

2" to 1/2" Fast Taper, 80 to 10 Meters• 33 ft. vertical radiator• Thick stainless steel tilt base• Easy tuning design—correct length and taper• No coils or linear loading elements• Requires DXE-UN-43 UNUN Balun for multi-band use

with your wide range tunerDXE-MBVE-2...............................................................................................................$179.50

43 Foot Multi-Band Vertical/Remote Tuner PackageIncludes DXE-MBVE-1 (above) plus:• MFJ-927 Remote IntelliTuner™—200 watts • DXE-FCC050-H05-A Feedline Current Choke • DXE-SSVC-2P Stainless Steel Mounting V-Clamp • Custom laser cut stainless steel bracket for tuner and FCC • Bias tee power injector for 12 Vdc • RG-8X 2 ft. coaxial cable with PL-259 connectors • 2 tinned copper braids, 1" wide for connection to your optional radial plate • Feedline wire—14 gauge insulated stranded copper with ring terminal attachedDXE-MBVE-1-3ATP Antenna/Tuner Package .......................................................$579.00DXE-MBV-ATU-1 Add-On Tuner Kit Only.........................................................$399.00

Standard Monoband High Performance Vertical Antennas

2 1/8" to 3/8" Fast Taper, 60 Meter• 43 ft. vertical radiator• Thick stainless steel tilt base• Full 60 meter coverage with SWR of 1.5 or less• No coils or linear loading elements• Includes impedance matching networkDXE-60VE-1P..............................................................................................................$229.95

Rugged High Performance 40 Meter • High strength, self-supporting vertical element• Operates over the entire 40 meter band with an SWR of less than 1.5:1• Less than 24 feet high• No coils or linear loading elements• Easily configured to operate on the 30 meter bandDXE-40VA-1................................................................................................................$249.50

2" to 1/2" Fast Taper, High Performance 40 Meter• 33-35 ft. tall vertical element• Operates over the entire 40 meter band with an SWR of less than 1.5:1• Full length—no coils or linear loading elements• Easily configured to operate on the 30 meter band• Perfect for four-square or phased arraysDXE-40VE-1................................................................................................................$179.95

2" to 1" Fast Taper, High Performance 30 Meter• 24 ft. tall vertical element• Operates over the entire 30 meter band with an SWR of less than 1.5:1• Full length—no coils or linear loading elements• Perfect for four-square or phased arraysDXE-30VE-1................................................................................................................$229.50

Visit www.DxEngineering.com for special DXE-MBVE-1 price packages



AV-14AVQ and AV-18AVQII Multi-Band Trap VerticalsThe 4-band Hy-Gain AV-14AVQ and 5-band AV-18AVQII use the sametrap design as the famous Hy-Gain Thunderbird beams. Separate airdielectric Hy-Q traps with oversize coils give superb stability and 1/4wave resonance on all bands. Their 18-foot overall length fits well inmost urban environments. The 14-AVQ covers the 10, 15, 20 and 40meter bands while the 18-AVQII adds the 80 meter band to the mix.All Hy-Gain multi-band vertical antennas are entirely self supporting—no guys required. They offer remarkable DX performance with theirextremely low angle of radiation and omnidirectional pattern.Hy-Gain vertical antennas handle 1,500 watts PEP SSB, have low SWRand automatic bandswitching. Heavy duty, slotted, tapered swaged air-craft quality aluminum tubing with full circumference compressionclamps is used for radiators.All Hy-Gain verticals feature a two year limited warranty.

HYG-AV-14AVQ..............................................$169.95HYG-AV-18AVQII............................................$239.95

Cushcraft Vertical AntennasCUS-MA160V 160 Meter 36 Ft. Vertical Antenna with Radial KitThis antenna is a compact, efficient vertical designed forworking top-band DX from an average-size house lot. Alow launch angle and deep overhead null combine to pullin distant stations while rejecting local QRM.CUS-MA160V........................................................$299.00

CUS-R6000 20-6 Meter 6-Band, 19 Ft. Vertical AntennaThis is a 6 through 20 meter, no-ground radial antenna.No traps are used on 6, 10 and 15 meters for maximumefficiency and power handling. CUS-R6000 ...........................................................$429.00

CUS-R8 40-6 Meter 8 Band, 28.5 Ft. Vertical AntennaThis multi-band design provides 8-band coverage encompassing the 6, 10, 12, 15, 17, 20, 30, and 40 meterbands. The antenna provides 360 degree (omni) coverageon the horizon and a low radiation angle in the verticalplane for a better DX.CUS-R8 .................................................................$529.00CUS-R8GK 3-Point, Non-Conductive

Guy System for R8 ...............$56.00

Hustler BTV VerticalsThe Hustler BTV antenna series delivers good performance, easy assembly, and the best reliability of any multi-band vertical on the market. These antennas offer 2:1 SWR or better at the band edges and up to a 100 kHz bandwidth on 75/80m (5BTV and 6BTV only). Hustler’s exclusive trap design offers the lowest loss possible.Hustler BTV series antennas are a quarter wave-trapped vertical design. The antenna should be ground-mounted with radials or elevated-mounted with tuned radials. Visit DXEngineering.com for more information about radials for quarter wave vertical antennas.The sealed cover on the traps assures stable tuning in all kinds of weather. There is a wide tuning range designed in the antenna to accommodate differing ground plane conditions. All antenna sections are 1.25 inch heavy wall, high strength aluminum. The traps use a solid 1 inch fiberglass form for optimum electrical and mechanical stability. The base uses an extra heavy duty aluminum mounting bracket with low loss, high strength insulators.The new, economical DX Engineering High Performance BTV packages include a stainless steel tilt base and radial plate, radial wire installation kit, direct coax feed add-on kit, bulkhead coax connector, low loss RG-8/U jumper cable, and stainless steel V-clamps.Antenna PackagesDXE-HUS-4BTV-P 4BTV High Performance Package............$379.00DXE-HUS-5BTV-P 5BTV High Performance Package ..........$419.00DXE-HUS-6BTV-P 6BTV High Performance Package ..........$454.00Antenna OnlyHUS-4BTV BTV-4 Band Antenna ..............................$124.95HUS-5BTV BTV-5 Band Antenna ..............................$159.95HUS-6BTV BTV-6 Band Antenna ..............................$189.95

CCuusshhccrraafftt •• HHyy--GGaaiinn •• HHuussttlleerr

CUS-MA160V

CUS-R8

CUS-R6000Ante

nnas

& A

cces

sorie

s

Hy-Gain Vertical AntennasAV-640 Patriot HF 8-Band, No-Radials VerticalHy-Gain’s new AV-640 Patriot HF is the best built, best performing, and best priced multi-band vertical available today. Make full use of your sunspot cycle with the Patriot’s low angle signal. The AV-640 uses quarter wave stubs on 6, 10, 12, and 17 meters and efficient end loading coil and capacity hats on 15, 20, 30, and 40 meters. An effective counterpoise system replaces radials and grounding. Instead of typical lossy can traps, the AV-640 resonators are placed in parallel—not in series. End loading of the lower HF bands allows efficient operation with a manageable antenna height. Maximum Power: 1,500 watts. Overall Height: 25.5 feet.HYG-AV-640................................................$379.95DX-77A 7-Band VerticalThe Hy-Gain DX-77A is an omni-directional, self-supporting, automatic-bandswitching vertical radiator. It operates on the 10, 12, 15, 17, 20, 30 and 40 meter Amateur bands. No ground radials are required with the DX-77A. Its design is based on an off-center-fed dipole, sometimes called a “Windom” antenna. High efficiency high-power traps are used to isolate the active sections of the antenna. The DX-77A uses a heavy duty, tiltable mast clamp that accepts masts up to 2 1/8" O.D. The entire antenna can be easily raised and lowered for tuning purposes and for use on recreational vehicles (RVs). The DX-77A’s overall length of 29 feet (8.8 meters) contributes to exceptional bandwidths on 40 and 20 meters. Maximum Power: 750 watts average, 1,500 watts PEP. HYG-DX-77A ...............................................$439.95AV-18HT Hy-Tower 5-Band, 50 Foot VerticalThe AV-18HT Hy-Tower is an omni-directional, self-supporting vertical radiator which operates on 10 through 80 meters. 160 meter operation is possible with the addition of a loading coil.The use of stub decoupling systems allows band switching on 10, 15, 20, 40, and 80meters. The stubs isolate various sections of the vertical antenna so that an electrical 1/4 wavelength (or odd multiple of 1/4 wavelength) exists on all bands. On 20 meters, the 80 meter section acts as a 3/4 wave radiator. The tilting base of the Hy-Tower allows the antenna to be completely assembled on theground before it is raised into position. It is light enough for one person to assemble andfor two people to erect. The Hy-Tower is supplied with stainless steel hardware. MaximumPower: 1 kW AM, 2 kW PEP. Overall Height: 53 feet.The Hy-Tower is drop-shipped via motor freight directly from Hy-Gain to you. DX Engineering will e-mail you a shipping quote when you place your order.HYG-AV-18HT ..........................................................................................................$899.95HYG-MK-160A 160 Meter Add-On kit for AV-18HT.......................................$119.95


DDiirreeccttiioonnaall AAnntteennnnaass

DX Engineering HEXX Antenna Kits and Components Build a G3TXQ Broadband Design Hexxagonal Beam antenna with a cost-effective DX Engineering Antenna Kit! The complete kits provide a quick, economical way to build the hottest new version of the hex antenna. Kit components are also available separately.The HEXXAGONAL BEAM kits include the new, patented* DX Engineering Stainless/Teflon®

Rigid feed point system. Unlike unbalanced coaxial feeder methods that require specialweatherproofing, the DX Engineering feedpoint system provides balanced 50 Ω connectionsto the wire elements. It is also available separately to easily retrofit other hex beam designs. DXE-HEXX-5TAP-2 5-Band Total Antenna Kit, Mark II ..........................................$599.95DXE-HEXX-1TAP-2 1-Band Total Antenna Kit, Mark II ..........................................$359.95DXE-HEXX-5FFP 5-Band Rigid Feedpoint System.............................................$194.95DXE-HEXX-1HBP Hub Kit ......................................................................................$99.95DXE-HEXX-5WRP-2 5-Band Precut Wire Element and Guide Kit, Mark II..............$149.95DXE-HEXX-1WRP-2 1-Band Wire Element and Guide Kit, Mark II ...........................$75.95DXE-HEXX-1SCP-2 Spreader and Center Post Kit, Mark II ...................................$199.95*US Patent D624,060

Hy-Gain Yagi AntennasTriband modelscover 20, 15 and10 meter bands. Check your antennawind load square foot specifications and select the proper rotator when ordering.HYG-TH-3JRS 3-Element HF Triband Beam, 600 watts ....................................$359.95HYG-TH-3MK4 3-Element HF Triband Beam, 1,500 watts .................................$469.95HYG-TH-5MK2 5-Element HF Triband Beam, 1,500 watts .................................$759.95HYG-TH-7DX 7-Element Super Thunderbird Broadband HF Triband Beam ....$869.95HYG-LJ-103BA 10 Meter Long John HF Monobander, 3 Elements....................$159.95HYG-LJ-153BA 15 Meter Long John HF Monobander, 3 Elements....................$209.95HYG-LJ-203BA 20 Meter Long John HF Monobander, 3 Elements....................$329.95HYG-BN-86 Balun for Yagi, 3-30 MHz, SO-239 ..............................................$79.95HYG-BN-4000B Balun for Yagi, 1-54 MHz, 4 kW, SO-239..................................$109.95

5 Bands

$59995

Mark IIImproved


Rotatable Dipole AntennasCUS-D3 20/15/10 Meter Triband...............................................................$369.00CUS-D3W 30/17/12 Meter WARC ................................................................$369.00CUS-D40 40 Meter ......................................................................................$399.00

Cushcraft Vertical AntennasCUS-MA160V 160 Meter with radial kit, 36 ft. ..............................................$299.00CUS-MA8040V 80/40 Meter Dual Band, 27 ft. ................................................$319.00CUS-MA5VA 20-10 Meter 5-Band, 14.7 ft...................................................$299.00CUS-MA6VA 20-6 Meter 6-Band, 14.7 ft.....................................................$339.00CUS-R6000 20-6 Meter 6-Band, 19 ft........................................................$429.00CUS-R8 40-6 Meter 8-Band, 28.5 ft.....................................................$529.00CUS-R8GK Guying Kit for R8 Antenna ......................................................$56.00CUS-AR10 10 Meter Ringo, 3dB, 17.6 ft..................................................$109.00CUS-AR6 6 Meter FM Ringo, 3 dB, 10 ft..................................................$99.00CUS-AR2 2 Meter FM Ringo, 3 dB, 3.9 ft.................................................$64.00CUS-ARX2 2 Meter Ringo Ranger, 5 dB, 9.3 ft. .........................................$79.00CUS-ARX2B 2 Meter Ringo Ranger II, 7 dB, 14 ft......................................$109.00CUS-ARX220B 220 Ringo Ranger II, 7 dB, 9 ft. .............................................$114.00CUS-AR270 2 Meter/440 Ringo, 3/5.5 dB, 3.75 ft. ....................................$129.00CUS-AR270B 2 Meter/440 Ringo, 5.5/7.5 dB, 7.7 ft. ...................................$189.00CUS-AR450 440 FM Ringo, 3 dB, 1.4 ft. ......................................................$47.00CUS-ARX450B 440 Ringo Ranger II, 7dB, 5 ft. ................................................$99.00


More Cushcraft Antennas on Pages 28-29.



NNEEWW ffrroomm DDXX EEnnggiinneeeerriinngg!!

SpecialIntroductory

Price!

Auto Tuned StealthAntenna (ATSA)ConceptGreat for EMCOMM—Assembleand Deploy in Minutes!Do you live in an area where antennas are not allowed? DX Engineering has designed acomplete antenna system thatallows Amateur Radio operators living under the shadow of HOA-controlled areas to get on theair easily. Even with a short 26 footwire antenna, you can typically beon the air on all bands 40 metersand up. With only 45 feet of wireyou can be on all bands from 80through 10 meters! That’s becausethe unique ATSA MatchBoxx™ module lets you use almost anylength wire—no more "forbidden"lengths as with other end-fed systems.Most small, physically short antennas exhibit narrow bandwidth,limiting your operating frequencyrange on the lower bands to 50 to100 kHz with acceptable SWR. The ATSA's integral auto tuner always delivers the lowestpossible SWR at any operating frequency with no operator adjustments necessary. Justchange bands and the ATSA antenna will follow you!The very low profile Remote Tuning Unit [RTU] is easily hidden, even in small bushes orshrubs. Just “plant” the RTU with supplied spikes and lay out the minimum length radials.The only thing visible is the wire antenna element, which can be made from small diameterwire for a near-zero visual impact. You can further camouflage the RTU with a plastic boulder or other items available at most landscaping stores.The DX Engineering ATSA system is completely self-contained; even the required 12 Vdcpower is carried by the coax. The ATSA will automatically match your coax to the antennaat any HF frequency within seconds. The complete system includes the RTU, stainless steelradial plate and hardware, radial wire, antennas wire, and two insulators. It’s everythingyou will need to get on the air and operating right under their noses.• Automatic bandswitching—tunes for lowest SWR• Handles 200 watts SSB/CW• Connect 12 Vdc power and RF through single coax feedlineDXE-ATSA-1 ATSA Multi-Band HF Antenna System....................................$459.00DXE-SA80-AOK Stealth Antenna 80M Tuning Coil Add-On Kit .........................$49.95

MFJ-57B

MFJ Stealth Antenna SystemsSuper Hi-Q LoopsEnjoy both DX and local contacts! MFJ’s tiny 36 inch diameter loop antenna lets you operate 7-21 MHz or 10-30 MHz continuously, including the WARC bands! It is ideal for small spaces like apartments, small lots, RVs, attics, and mobile homes. 150 wattscapacity.MFJ’s super remote control has Auto Band Selection--no control cable needed. TheCross-Needle SWR/Wattmeter lets you quickly tune manually to your exact frequency. Allwelded construction with no mechanical joints for the highest possible efficiency.MFJ-1786 Super Hi-Q Loop Antenna, 10-30 MHz ..................................$419.95MFJ-1788 Super Hi-Q Loop Antenna, 7-21 MHz ....................................$469.95Mini-Loop Antennas and TunersThe PVC Cross Loop Antenna Kits include a 4.5 x 4.5 foot PVC cross mount that plugs into the cover of the loop tunerplus insulated 10-gauge flexible loop wire with lowresistance lugs. Place the loop around the cross mountand get ready for multi-band coverage. Add one of the Loop Tuners for a complete antenna package that is tunableacross the range specified for the antenna you choose.MFJ-57B Loop Antenna Kit, 20-15M ................................................................$29.95MFJ-58B Loop Antenna Kit, 30-40M ................................................................$49.95MFJ-932 Loop Tuner, 5.3-30 MHz, 20W........................................................$139.95MFJ-933 Loop Tuner, 5.3-30 MHz, 150W......................................................$189.95MFJ-935B Loop Tuner, 5.3-30 MHz, 150W with Current Meter ......................$209.95MFJ-936B Loop Tuner, 5.3-30 MHz, 150W with Current/SWR/Wattmeter ......$259.95

Butternut AntennasButternut antennas have a well-earned reputation for performance and long life. They are easy to erect and tune, and will lastmany years. No lossy traps are used in theseinternationally acclaimed antenna designs.Butternut VerticalsBUT-HF2V 2-Band, 80/40M......................................................................$315.00BUT-HF6V 6-Band, 80/40/30/20/15/10M ...............................................$425.00BUT-HF9V 9-Band, 80/40/30/20/17/15/12/10/6M ...................................$495.00BUT-TBR-160S160 Meter Top Band Kit for HF2V/6V/9V .....................................$180.00BUT-CPK Counterpoise Kit for HF6V/9V ..............................................$200.00BUT-A-17-12 17/12 Meter Kit for HF6V, 277-10 ..........................................$66.00BUT-A-6 6 Meter Kit for HF6V, 277-12 .................................................$20.00Butternut YagisBUT-HF5B 5-Band Butterfly Beam, 20/17/15/12/10M ...........................$525.00BEN-3X10 Skyhawk Triband Beam, 20/15/10M...................................$1,225.00

BEN-3X10

BUT-HF2V BUT-HF6V BUT-HF9V

Ante

nnas

& A

cces

sorie

s


RRoottaattoorrss && CCoonnttrroolllleerrss


Hy-Gain HDR-300A Heavy Duty Rotator with Digital Readout The HDR-300A Heavy Duty Rotator is for king-sized antenna arrays with up to 25 square feet wind load area. It features a control cableconnector, a hardened stainless steel output shaft, North or Southcentered calibration, ferrite beads on potentiometer wires toreduce RF susceptibility, and a longer output shaft keyway foradded reliability. Heavy duty, self-centering steel mast clamp andhardware included. The digital display is accurate to one degree.HYG-HDR-300A................................$1,339.95

Hy-Gain CD-45II Metered Rotator with Friction Brake The CD-45II handles 8.5 square feet when mounted inside a tower, or 5 square feet with a mast adapter. • Low temperature grease good to -30° F• Bell rotator design gives complete weather protection• Dual 24-ball bearing race for load bearing support• North center scale, dual lighted directional meter indicator• 8-pin plug/socket on control unit, snap-action control switches, low voltage control• Handles masts up to 2 1/16" O.D.• MSLD light duty lower mast support adapter included• Power requirement: 110V, 60HzHYG-CD-45II..................................................................................................................$419.95

Rotator AccessoriesDXE-CW8 Control Wire, 8-conductor ........................................................per ft. $0.48DXE-CW8-HD Heavy Duty Control Wire, 8-conductor.....................................per ft. $0.98DXE-UBK-HYG-1 Replacement U-Bolt (single) Kit for Hy-Gain

HAM-Series/CD-45...............................................................................$4.50DXE-UBK-HYG-2 Replacement U-Bolt (single) Kit for Hy-Gain T2X Rotor.....................$5.50

Green Heron Universal DigitalRotor ControllerThe DX Engineering-suppliedGHE-RT-21 adds advanced operating features to your existing rotor setup—no need to climb the tower! It’s pre-programmed for Hy-Gain HAM-series and T2X units. Setup for most other rotors is solderless (with jumpers) and field-programmable via the front panel or with the included Setup Utility PC software.• Master/Slave control for stacked arrays turns multiple rotors together or separately• Counter Rotation operating mode allows you to install a rotor above a rotating tower • Position rotors with manual push button controls, point-and-shoot presets, or on

your computer using RS-232 and USB connections• PWM variable speed control with start and stop ramping reduces tower

and antenna stresses • Precision heading accuracy up to 1/10°• Fully supports side-mounted antennas (soft limits prevent running into tower),

and over-travel up to 720°• Offset control allows center of rotation at any heading, north/south center on same mast,

and slipped mast compensation• Programmable reversal and brake delay, speed min./max, limits, ramps, etc. • High visibility display with adjustable backlight GHE-RT-21 Green Heron Universal Digital Rotor Controller .....................$559.00

Hy-Gain T-2X RotatorThis is the complete tower-mounted unit of the T2X rotor, with clamps and mounting hardware included. Ideal for replacing an old Hy-Gain HAM-IV rotator or for use with a third-party controller such as the Green Heron RT-21, The T2X is designed for medium communications arrays of up to 20 square feet wind load area.• Normal operation down to -30° F• Steel alloy ring gear good to 100,000 PSI for maximum readability• Indicator potentiometer with ferrite beads on wires to reduce

RF susceptibility• Weatherproof AMP connector plus 8-pin plug at control box• Control Console #5137701 HYG-T-2X Rotator with Console....................$689.95HYG-T-2XRLCT-2X Rotator Unit without Console.......$599.95

Hy-Gain HAM-IV RotatorThe HAM-IV is the most popular rotator in the world! It is designed for medium-size communications arrays of up to 15 square feet wind load area. • Normal operation down to -30° F• Dual 98-ball bearing race for load bearing strength • Electric locking steel wedge brake • Ferrite beads on potentiometer wires reduce RF susceptibility• Cinch plug connector plus 8-pin plug at control box—noscrewdriver required• N or S center of rotations scale on meter• Low voltage control• Handles masts up to 2 1/16" O.D.• Power requirement: 110V, 60HzHYG-HAM-IV Rotator with Console.....................$594.95HYG-HAM-IVRLC Rotator Unit with Clamps/Hardware,

without Console............................$499.95

Hy-Gain R-35 Light Beam/TV Rotator This rotator is designed to turn and accurately position even the largest TV antenna, and most small VHF and UHF ham radio beams. Rotation of the drive unit is synchronized by synchronous motors with the position of the moving dot of the control unit. The operating cycle is activated by turning the control knob.HYG-AR-35 .......................................................................$89.95

Hy-Gain HAM-V Rotator with DCU-1 Pathfinder Digital ControlThe HAM-V is designed for medium-size communications antenna arrays of up to 15 square feet wind load area. The innovative DCU-1 Pathfinder Control Unit is included. The DCU-1 gives you automatic operation of your brake and rotor, features computer control with RS-232 passthrough, and is compatible with many logging and contest programs. It has 6 presets, 1 degree heading accuracy, automatic 8-second brake delay, and 360 degree choice for center of rotation. • Low temperature grease permits normal operation down to -30° F• Ferrite beads on potentiometer wires reduce RF susceptibility• Cinch plug connector plus 8-pin plug at control box—

no screwdriver required• N or S center of rotations scale on meter• Handles masts up to 2 1/16" O.D.• Power requirement: 110V, 60HzHYG-HAM-V.......................................................................$919.95




CCuusshhccrraafftt HHFF YYaaggiiss aanndd LLoogg PPeerriiooddiiccss

X-7 Big Thunder Triband Yagi AntennaThe X-7 Triband Yagi sets new standards in both radiating performance and mechanicalreliability. Each mechanical component is designed to survive 100+ MPH winds with a1.25 safety factor. The new 4L Log Cell design eliminates traps from the high current driven elements and reflectors, which yields virtual monoband performance and maximum power handling capability. Traps are employed only in the lower current directors for increased gain and sharper pattern. The result is a truly high performanceantenna that will easily handle the legal limit.CUS-X7 7-Element Beam, 12.5/13 dB..............................................$1,099.00CUS-X740 40M Add-on Kit for X7 ...........................................................$369.00

XM-240 Big Thunder 40M Monoband AntennaCushcraft’s XM-240 monobander utilizes rugged Big Thunder and high strength aluminumtubing that gives the antenna outstanding wind survivability. Phillystran boom trusses provide extra boom stability. The feed system is a 50 Ω direct feed; VSWR is flat acrossthe band. A high power 1:1 balun is included. Excellent front-to-back ratio and gain makesthe XM-240 the right choice for both DX and stacking.CUS-XM240 40M, 2-Element Beam, 6 dB, 22 ft. boom .............................$999.00

ASL-2010 Log Periodic Yagi AntennaThe ASL-2010 is the most cost effective high gain, five-band antenna on the market today.Skylog offers continuous operation from 13.5 to 32 MHz. Antenna gain and beamwidthare constant for uniform coverage from 10 through 20 meters. The ASL-2010 is rated for continuous duty at full legal power. Skylog is designed for maximum gain on a manageable 18 foot boom with only 10.1 square feet of wind surface area. Stainless steelhardware and a rugged element design provide years of superior antenna performance.Skylog ASL-2010 is the smart choice for multiband HF operation.CUS-ASL2010 20-10M, 8-Element Log Periodic Yagi, 6.4 dB.......................$999.00

CUS-X7

CUS-XM240

CUS-ASL2010

More CushcraftAntennas onPages 24-25.

Ante

nnas

& A

cces

sorie

s


Mail: P.O. Box 1491, Akron, OH 44309 • E-Mail: [email protected] • Web: DXEngineering.com 29Mail: P.O. Box 1491, Akron, OH 44309 • E-Mail: [email protected] • Web: DXEngineering.com 29

MA-5B Compact Multi-Band HF AntennaCushcraft’s multi-band HF antenna provides 5-band operation in a package small enoughto mount to a tripod. The MA-5B does not sacrifice ruggedness, performance and powerhandling for size and ease of installation. CUS-MA5B 20-10M 5-Band Mini Beam ....................................................$499.00

Rotatable Dipole AntennasThe World Ranger dipoles provide bi-directional patterns with rotatable convenience. Youcan mount them high and away from the trees for better performance than a wire dipole.These single and multi-band dipoles feature high-performance traps, heavy wall tubing,and rugged hardware for years of enjoyment.CUS-D3 20/15/10M Triband Rotatable Dipole......................................$369.00CUS-D3W 30/17/12M Triband Rotatable Dipole, WARC .........................$369.00CUS-D40 40M Rotatable Dipole .............................................................$399.00

VHF/UHF Yagi AntennasCushcraft engineers used computer-aided modeling and test range techniques to optimizethe performance of these popular VHF and UHF Yagis. That means you get more gain and cleaner patterns with excellent front-to-back ratios. The S-series antennas* have very broad bandwidth so they will not detune in bad weather, and feature stainless steelhardware for a long, trouble-free life. *S-series antennas are denoted by an ‘S’ at the end of the part numberCUS-TEN3 10M 3-Element Beam, 8 dB, 8 ft. boom ................................$299.00CUS-A503S 6M 3-Element Beam 8 dB, 6 ft. boom ...................................$139.00CUS-A505S 6M 5-Element Beam 10 dB, 12 ft. boom ...............................$199.00CUS-A506S 6M 6-Element Beam, 11 dB, 20 ft. boom ..............................$399.00CUS-A627013S 6/2/440 3-Band, 3/5/5-Element Beam, 8.6 ft boom...............$279.00CUS-A2706S 2M/440 3/3-Element Beam, 7.8 dB........................................$129.00CUS-A27010S 2M/440 5/5-Element Beam, 10 dB ........................................$169.00CUS-A1483S 2M 3-Element Wideband Beam, 7.8 dB ...................................$69.00CUS-A14820T 2M 20-Element Twist Beam, 13 dB........................................$219.00CUS-A124WB 2M 4-Element Beam, 10.2 dB, 4 ft. boom .............................$109.00CUS-A13B2 2M 13-Element Beam, 15.8 dB, 15 ft. boom .........................$249.00CUS-A26B2 2M Pair of 13B2 Vertical Stacked Beams...............................$599.00CUS-A17B2 2M 17-Element Beam, 18 dB, 31 ft. boom ............................$369.00CUS-A224WB 220 4-Element Beam, 10.2 dB, 3 ft. boom...............................$99.00CUS-A719B 432 19-Element Beam, 15.5 dB, 13.5 ft. boom .....................$249.00CUS-A43011S 430 11-Element Beam, 13 dB, 4.6 ft. boom ..........................$119.00CUS-A4496S 440 6-Element Beam, 10 dB, 2.9 ft. boom...............................$79.00CUS-A44911S 440 11-Element Beam, 13 dB, 4.4 ft. boom ..........................$119.00CUS-PD2 Power Divider for Two VHF or UHF Antennas ..........................$69.00CUS-PD4 Power Divider for Four VHF or UHF Antennas .........................$89.00

CUS-MA5B

CUS-D3W

CUS-A506S

CUS-A4S

Cushcraft Yagi AntennasPrecisely tuned high-power traps,carefully selected element lengths,and proper spacing combine tomake Cushcraft’s tribanders the preferred antennas for your HFwork! High gain, low SWR, and wide bandwidth keep the contactscoming in. All U-bolts, clamps, andhardware are stainless steel. Pick the model for the size and performance level that fitsyour needs. Add 30 or 40 meters with add-on kits. CUS-A3S 3-Element Triband Beam, 8 dB, 14 ft. boom...............................$599.00CUS-A3WS 3-Element WARC Beam, 17/12 meter, 8 dB,14 ft. boom............$499.00CUS-A4S 4 Element Triband Beam, 8.9 dB, 18 ft. boom ...........................$699.00CUS-MA5B 20-10 meter 5-Band Mini Beam..................................................$499.00CUS-X7 7-Element Triband Beam, 12.5/13 dB......................................$1,099.00CUS-XM240 40 Meter 2-Element Beam, 6 dB, 22 ft. boom ............................$999.00CUS-TEN3 10 Meter 3-Element Beam, 8 dB, 8 ft. boom .............................$299.00CUS-A503S 6 Meter 3-Element Beam, 8 dB, 6 ft. boom ...............................$139.00CUS-A505S 6 Meter 5-Element Beam, 10 dB, 12 ft. boom ...........................$199.00CUS-A506S 6 Meter 6-Element Beam, 11 dB, 20 ft. boom ...........................$399.00Add-on KitsCUS-A743 40/30 Meter Add-on Kit for CUS-A3 and A3S.............................$199.00CUS-A103 30 Meter Add-on Kit for CUS-A3WS...........................................$199.00CUS-A744 40/30 Meter Add-on Kit for CUS- A4 and A4S............................$199.00CUS-X740 40 Meter Add-on Kit for CUS-X7.................................................$369.00

CUS-A3S




MMuullttii--BBaanndd VVeerrttiiccaall && YYaaggii AAnntteennnnaass

A144S5

PhasedA430S10

A502HB

Wide-Band Performance • Highest Gain • Factory Adjusted—No Tuning Required • UPS ShippableHigh Wind Rating • Fiberglass Radome • DC Grounded • Stainless Hardware • Mounts & U-Bolts Included

X500

HNA

X50N

A

X30A

Yagi Antennas

MODELBAND(MHz)

GAIN(dB)

WATTS (PEP) CONN.

BOOMLENGTH

ELEMENTPHASING

A502HB 50 6.3 400 UHF 2.6' 2 element

A144S5 144 9 100 UHF 37.5" 5 element

A430S10 432 13 100 UHF 43" 10 element

A430S15 432 14.8 100 UHF 89" 15 element

Ruggedized Base/Repeater AntennasX500HDMDiamond Antenna’s best base station repeater antenna. It is pretuned to achievemaximum gain in both the 2 meter and 70 centimeter amateur bands and has awide frequency bandwidth. Features include a heavy-duty fiberglass radome, overlapping outer shells for added strength, stainless steel mounting hardware and radials, and waterproof joint couplings.• Frequency: 144-148 MHz/2 meter, 440-450 MHz/70 centimeter• Gain: 8.3 dB/2 meter, 11.7 dB/70 centimeter• Power Rating: 200 watts maximum• Wind Rating: 90 MPH (no ice)• Height: 17.8 feetDIA-X500HNA .......................................................$299.95

X50NAAn excellent choice where ruggedness is required in a medium-gain, dual-band, base/repeater application. Features include a wide frequency bandwidth, heavy-duty fiberglass radome, stainless steel mounting hardware and radials, and a Type-N cable connection. Compact 5.6 foot height for easy mounting and installation.• Frequency: 144-148 MHz/2 meter, 440-450 MHz /70 centimeter• Gain: 4.5 dB/2 meter, 7.2 dB/70 centimeter• Power Rating: 200 watts maximum• Wind Rating:135 MPH (no ice)DIA-X50NA ..............................................................$99.95

X30AThe X30A works well in areas where height and/or antenna restrictions are an issue. Features include a wide frequency bandwidth, heavy-duty fiberglass radome, stainless steel hardware, and a UHF cable connection. Compact 4.5 foot height for easy installation.• Frequency: 144-148 MHz/2 meter, 440-450 MHz/70 centimeter• Gain: 3.0 dB/2 meter, 5.5 dB/70 centimeter• Power Rating: 150 watts maximum• Wind Rating:135 MPH (no ice)DIA-X30A.................................................................$69.95

Yagi Antennas• High gain• Quality construction• Easy assembly• Ideal for base or portable use• Factory adjusted—no tuning required

BB7V Multi-Band HF Vertical AntennaThis lightweight (4.5 lb.) antenna provides coverage from 2 MHz to 30 MHz without radials. The BB7V has six telescopingsections that nest in each other—collapsed length is 5 feet,extends to 22 feet when fully deployed. The sections are selflocking (no hardware to lose) and can be raised or lowered inless than a minute. For permanent use, each section can belocked in place with a single screw. Ideal for users with antenna restrictions or travelers wanting a quick and easy wideband antenna solution.DIA-BB7V Multi-Band HF Vertical Antenna .....$399.95

Vertical Antennas

MODEL FREQ (MHz) IMPED WATTS (PEP) CONN.BOOMLNTH. WEIGHT

BB7V 2-30 (W/TUNER) 50Ω 250 UHF 60”/22’ 4.5 lbs.

Mast requirement: 1.4"-2.4"

You’ve seen the rest...now own the best!

Mono-Band Base/Repeater Antennas

MODELBAND(MHz)

GAIN(dB) WATTS# CONN. HT. FT.

RATED WINDMPH (No Ice)

CP22E 1 144 6.5 200 UHF 9.0 70

Dual-Band Base/Repeater Antennas

MODELBAND(MHz) GAIN (dB) WATTS# CONN. HT. FT.

RATED WINDMPH (No Ice)

X30A 144/440 3.0/5.5 150 UHF 4.5 135

X50A 144/440 4.5/7.2 200 UHF 5.6 135

X50NA 144/440 4.5/7.2 200 N 5.6 135

X300A 144/440 6.5/9.0 200 UHF 10.5 112

X300NA 144/440 6.5/9.0 200 N 10.5 112

X510HDM 144/440 8.3/11.7 330/250 UHF 17.2 90

Tri-Band Base/Repeater Antennas

MODEL BAND (MHz) GAIN (dB) WATTS# CONN. HT. FT.RATED WINDMPH (No Ice)

V2000A 3,5 52/144/440 2.1/6.2/8.4 150 UHF 8.3 110

X3200A 4 146/222/440 6.0/7.8/8.0 100/200 UHF 10.5 112

X6000A 144/440/1240 6.5/9.0/10.0 100/60 N 10.5 112

MIXHF VHF

M

M M

MIX50 144 430

M

M M M

MX2000

MX62M

NOTES: 1) Heavy duty aluminum construction. 2) X510NJ: 144-147/430-440 MHz. 3) 1/4l rated in dBi. 4) 2m: 146-148; 100 watts 5) 52-54 MHz only. Tunable. 6) Tunable for 10MHz BW. 7) 1.25 Bandwidth. 8) Tunable 144-174 with cutting chart.9) 500W P.E.P./200W FM BAND: 144=144-148 MHz., 222=222-225 MHz. 420=420-430 MHz., 430=430-440 MHz. 440=440-450 MHz., 1240=1240-1300 MHz. # Power rating should be reduced in repeater service.

CALL/WEB for current prices.

Ante

nnas

& A

cces

sorie

s


antenna systems & accessories...dxe-7580-thk cw optimizer capacity hat.....$59.95 80 meter with...

Documents