answers. for stability / low centre of gravity / to make it heavy / to stop it falling over / so...
TRANSCRIPT
ANSW
E
RS
For stability / low centre of gravity / to make it heavy / to stop it falling over / so that feet can be attached / ease of manufacture
Lower melting point / does not rust / easier to cast / easier to cut and shape / does not need a finish
To prevent it slipping / to prevent it marking surfaces / improves sound insulation / improves stability
Sand casting
Crucible
Runner
Riser
Drag
Anti skid – Rubber feet (also accept Wide - non-slip rubber treads)
Supports up to 150kg
500mm height (top step)
White, plastic dip-coated finish
Folds to a compact size
Oak, Ash etc.
Available in wide sheets / no need to glue strips together / cheaper / has strength in two directions / no knots / won’t warp
Cut one out then use it as a template / Cut both when clamped together / CNC
Jigsaw
Power Sander / orbital sander / hand sander / sander
Varnish / stain / wax / oil / linseed oil
A scale model of a human
Three jaw chuck / chuck
Tool post
Tailstock
Guard down / remove chuck key / ensure tool post is clear of the chuck / ensure work is held tight / ensure tool is held securely
Centre drill / slocombe drill / combination drill
Facing off / facing
Taper turning / chamfering / tapering
Parting off / parting
Protection / can be hung on display / can see through the packaging / can add product information / easily moulded to shape / can be re-cycled / looks good / easy to carry etc.
Thermo plastic
Vacuum forming
Stage C
Stage D
Pine etc.
Housing joint / through housing joint
Improved appearance / can’t see the joint from the front / joint can’t slide out
Forstner bit / forstner drill / forstner
Any two from - Remove pencil marks / coarse then fine glasspaper / raise the grain / wipe with white spirit / wire wool / use filler / remove excess glue / remove dust / plane / use the scraper
Wood lathe / lathe
Draw diagonals on the end faces of the blank
Saw down one diagonal for the fork centre to fit into
Plane the edges (corners) off the blank
Parting tool
Countersink bit / rose bit / countersink rose
To make the heads of the screws flush with the surface of the wood
Looks more interesting / more dynamic / less boring / less boxy / anything suggesting ‘looks
The slope prevents CD’s falling forwards / the back stops CD’s falling backwards / folded down front eases access / can be screwed onto a wall
Rounded corners and folded edges reduce the possibility of cuts
Marking out
Folding
Cutting to shape
Drilling
Any two from - Corrosion protection / improved aesthetics / makes it look better / matches the environment
142
102