CHAIN

BLOCKS 11-25

BOLTS, EYE 11-22

CHAIN

BINDER 11-24

HERC-ALLOY 800 GRADE 80 11-11

MARINE APPLICATIONS 11-15

STUD LINK 11-15

TRUCK & TRACTOR 11-16

TYPES 11-12

CLAMPS, PLATE – BEAM 11-16

GENERAL

PURCHASING DATA 11-30

TESTING FACILITIES 11-70

HOISTS, HAND & ELECTRIC 11-26

HOOKS 11-17

LINKS, CONNECTING 11-18

LOAD BINDERS 11-24

RINGS, FORGED & WELDED 11-21

SHACKLES, SCREW PIN 11-19

SHEAVES 11-25

SLINGS

ALLOY 11-50

LIFTING EQUIPMENT 11-60

MESH, WIRE – NYLON 11-23

SAFE WORKING LOADS 11-24

WORKING LOADS – GRADE 30, 40, 70 11-08, 11-09, 11-10

SWIVELS 11-23

TURNBUCKLES 11-23

WIRE ROPE & FITTINGS 11-25

11MPage 1

11Chain

AN/onglets/Fetmet/ Page 21

Eng Tabs_P21 10/18/05 7:20 AM Page 21

AN/onglets/Fetmet/ Page 22

11MPage 2

11Chain

In our Hamilton location we operate modernwelding and bending/blacksmith equipment,fabricate and repair chain slings, special lift-ing and hoisting assemblies, and do customforgings. We are ready to serve industriesneeds across North America. Contact theoffice in your area for further information.

OUR CHAIN DIVISION FACILITIESINCLUDE –

GAS ANNEALING FURNACE

TIG WELDING

EQUIPMENT FOR CHAIN, BARS,SHAFTS AND ACCESSORIES.

CAPACITY OF TESTING EQUIPMENTup to 200,000 LBS.

SMALL AND LARGE CAPACITY BENDERS

END WELDERS

Chain Repair

and Testing

Eng Tabs_P22 10/18/05 7:20 AM Page 22

DEFINITIONS, INSTRUCTIONS AND CAUTIONSTO AID IN THE PURCHASE OF CHAIN

In this section we present information regarding our stock of chainand chain attachments and accessories. Our facilities includechain assembly and forge plant, heat treating furnaces, Tig weld-ing equipment and testing equipment.

We specialize in the production of chain slings and hoisting equip-ment.

WORKING LOAD LIMIT OR SAFE WORKING LOAD

The maximum load which may be applied in pounds when chain isnew.

MEASUREMENTS

Pitch is the inside length of chain link.

Unless otherwise specified length of a chain is the distance frominside to inside of end links or attachments.

TOLERANCE

Welded coil chain is subject to dimension and weight tolerance ofplus or minus 4%.

ATTACHMENTS

Hooks, Rings, Shackles, etc., desired for use with chain should beselected of a grade and size corresponding to chain being used.Tables on following pages will be helpful for specification.

If special attachments are required, drawings should be supplied.

ANNEALING, REPAIRING AND RETESTINGWROUGHT IRON AND LOW CARBON MILD STEEL CHAIN

Chains and slings are subjected to work hardening or crystalliza-tion through continuous usage. Our repair department is highlyskilled in reconditioning and testing your chains for continued safeservice.

REPAIRING AND HEAT TREATING ALLOY CHAINS

After long heavy service alloy chain slings sometimes requirerepair. We have the necessary argon Tig welding and heat treat-ment equipment to carry out this work.

PROOF TESTING

All types of chain and fittings, rods, bars, eye-bolts and manyother metal products can be proof tested on our approved200,000 pound capacity test bed.

11MPage 3

Sec 11_Eng_P3 10/19/05 8:03 AM Page 3

ALLOY SLINGS AND CHAIN

The only grade of chain recommended for overhead lifting is chainthat has been fabricated from alloy steel. This chain may be pur-chased in lengths, or as a complete sling assembly to meet yourrequirements.

We supply chain manufactured from AISI Alloy grade steel. This isthe standard of most Canadian manufacturers of alloy chain. Thelinks of alloy chain are easily identified by an embossed symbol(A8, C8, HA8 or T) referring to grade 800 or (T) which is the inter-national symbol for alloy chain. If neither of these symbols appearon your chain it is not recommended for overhead lifting. (Symbolsshould appear at least once per every foot).

Every length of alloy chain leaving the manufacturers plant isproof-tested to twice its safe working load. Every manufacturedsling leaving our warehouse is also tested to double their safeworking load and a numbered test certificate corresponding to thesling number is supplied.

KEEPING SLING RECORDS

ASK OUR REPRESENTATIVE TO EXPLAIN OUR SLING ANDINSPECTION PROGRAM DESIGNED TO IMPROVE YOUR

SAFETY STANDARDS AND LOWER YOURCHAIN REPLACEMENT COSTS

‘SAFETY IS EVERYONE’S BUSINESS’

11MPage 4

Sec 11_Eng_P4 10/19/05 8:03 AM Page 4

ALLOY SLING CHAINS

SINGLE DOUBLE TRIPLEOBLONG LINK OBLONG LINK OBLONG LINKGRAB HOOK SLING HOOKS FOUNDRY HOOKSTYPE SOG TYPE DOS TYPE TOF

TYPE DEFINITION

FIRST SYMBOL SECOND SYMBOL THIRD SYMBOLS – Single Leg O – Oblong Master S – Sling HookD – Double Leg Link G – Grab HookT – Triple Leg P – Pear Shaped F – Foundry HookQ – Four Leg Master Link

R – Master Round Ring

REACH:Denotes length of sling from upper bearing point of oblong tolower bearing surface of hook.

SPECIAL ATTACHMENTS:Such as hooks, or clamps can be furnished to your design.Our forging shop is equipped to produce from your drawingsto meet your special requirements.

NON STANDARD SLINGS:Endless, stone handling, magnet lifting, assemblies andmany others are available upon request.

11MPage 5

RE

AC

H A

S R

EQ

UIR

ED

RE

AC

H A

S R

EQ

UIR

ED

RE

AC

H A

S R

EQ

UIR

ED

Sec 11_Eng_P5 10/19/05 8:03 AM Page 5

GENERAL LIFTING EQUIPMENT

STEEL SHEET LIFTING SLINGS

STEEL PLATE LIFTING SLINGS

11MPage 6

Sec 11_Eng_P6 10/19/05 8:03 AM Page 6

TESTING & INSPECTION

Our chain tester has a capacity of 100 tons. The pumping systemhas three pressure ranges between 100 pounds and 140,000pounds. This provides the muscle to test or break the largestchains or slings, as well as, load tests on the lightest slings andchains used in industry.

Test results are read digitally in either metric or imperial values,with a peak hold feature, which can be connected to a print outunit.

Our chain tester has a 32 foot bed and is equipped with a hydrauli-cally operated cover for protection during test operation.

TENSION•

HARDNESS•

ULTRASONIC•

MAGNAFLUX

11MPage 7

While HeatedApply After Cooling

Following PermanentReductions Reduction

Temp. to Working to Workingof Chain Load Limit Load Limit

500°F None None600°F 10% None700°F 20% None

800°F 30% None900°F 40% 10%1000°F 50% 15%

SIZE SINGLE DOUBLE BRANCH TRIPLE QUAD

in. mm 90° 60° 45° 30° 60° 45° 30°

7⁄32" 5.5 2100 3600 3000 2100 5450 4450 3150

9⁄32" 7.0 3500 6100 4900 3500 9100 7400 5200

3⁄8" 10.0 7100 12300 10000 7100 18400 15100 10600

1⁄2" 13.0 12000 20800 17000 12000 31200 25500 18000

5⁄8" 16.0 18100 31300 25600 18100 47000 38400 27100

3⁄4" 20.0 28300 49000 40000 28300 73500 60000 42400

7⁄8" 22.0 34200 59200 48400 34200 88900 72500 51300

1" 26.0 47700 82600 67400 47700 123900 101200 71500

11⁄4" 32.0 72300 125200 102200 72300 187800 153400 108400

C H A I N E V E N T S

Sec 11_Eng_P7 10/19/05 8:03 AM Page 7

GRADE 30 REGULAR LINK CHAIN

A durable, economical utilitychain. Also known as proofcoil, Grade 30 chain is man-ufactured from carbon steel.

USESGuard rail chains, towingand logging chains and var-ious other industrial andagricultural applications.

FINISHESSelf-coloured, hot galva-nized or bright zinc plated.

PACKAGINGAvailable in drum, halfdrum, pailpak, mini-pailpakand reels.

SPECIFICATIONSNOMINAL SIZE LINK INSIDE WORKINGSTOCK DIA. (A) DIMENSIONS WEIGHT LOAD LIMIT

(B) (C)MM INCH DEC. WIDTH LENGTH LBS/FT KG. LBS.

24.0 1/8 1.157 1.285 1.825 10.197 1180 1340025.0 3/16E 1.197 1.455 1.065 10.317 1280 1362025.6 3/16T 1.220 1.375 1.040 10.397 1365 13800

26.3 1/4E 1.248 1.400 1.015 10.520 1500 1110027.1 1/4T 1.280 1.435 1.140 10.667 1580 1130028.0 5/16E 1.315 1.490 1.025 10.899 1860 1190028.5 5/16T 1.335 1.505 1.140 11.120 1900 12000

29.5 3/8E 1.375 1.630 1.451 11.210 1090 1240010.0 3/8T 1.394 1.680 1.570 11.310 1200 1265012.0 7/16 1.472 1.715 1.460 12.033 1590 1350012.5 1/2E 1.492 1.875 2.050 12.224 1890 14150

13.5 1/2T 1.531 1.830 1.700 12.565 2090 1460016.0 5/8 1.625 1.890 2.600 13.303 3130 1690020.0 3/4 1.781 1.100 2.625 15.472 4800 1060026.2 1 1.031 1.510 2.770 10.690 6340 13950

Dimensions and weights are approximate and subject to variation.

WARNING: Working load limit is not to be exceeded. This chain is not tobe used for overhead lifting.

11MPage 8

Sec 11_Eng_P8 10/19/05 8:03 AM Page 8

GRADE 40 CHAIN

A selected analysis carbonsteel chain with higher ten-sile strength and better re-sistance to wear and abra-sion than Grade 30 chain.Also known as “High Test”.Embossed ‘G40’ and alter-nately with date code.

USESLogging chains, towingchains, binding chains andvarious other applications.

FINISHESSelf-coloured, hot galva-nized or bright zinc plated.

PACKAGINGAvailable in drum, halfdrum, pailpak, mini-pailpakand reels.

SPECIFICATIONSNOMINAL SIZE LINK INSIDE WORKINGSTOCK DIA. (A) DIMENSIONS WEIGHT LOAD LIMIT

(B) (C)MM INCH DEC. WIDTH LENGTH LBS/FT KG. LBS.

27.1 1/45 .280 .465 1.915 0.722 1179 260028.5 5/16 .335 .525 1.140 1.021 1769 390010.0 3/85 .394 .550 1.200 1.461 2449 5400

12.0 7/16 .472 .700 1.460 2.083 3260 720013.5 1/25 .531 .800 1.700 2.561 4170 9200

Dimensions and weights are approximate and subject to variation.

WARNING: Working load limit is not to be exceeded. This chain is not tobe used for overhead lifting.

11MPage 9

Sec 11_Eng_P9 10/19/05 8:04 AM Page 9

11MPage 10

GRADE 70 CHAIN

A high strength, hardenedand tempered chain madefrom special analysis steel.Developed to meet trans-port load binding regula-tions where applicable. Alsoknown as “Transport Chain”.Embossed ‘G70’, and alter-nately with date code.

USESLoadbinding chains, towingchains, logging chains andvarious other applications.

FINISHESSatin or Yellow Dichromate(gold) plated.

PACKAGINGAvailable in drum, half drumand pailpaks.

SPECIFICATIONSNOMINAL SIZE LINK INSIDE WORKINGSTOCK DIA. (A) DIMENSIONS WEIGHT LOAD LIMIT

(B) (C)MM INCH DEC. WIDTH LENGTH LBS/FT KG. LBS.

27.1 1/46 .280 1.475 1.900 0.742 11430 1315028.5 5/16 .335 1.515 1.125 1.028 12130 1470010.0 3/86 .394 1.575 1.200 1.463 12990 16600

12.0 7/16 .472 1.700 1.440 2.135 13970 1875013.5 1/26 .531 1.850 1.700 2.640 15130 1130016.0 5/86 .625 1.945 1.960 3.822 17760 1710020.0 3/46 .750 1.100 2.230 5.753 11200 24700

* Satin finish only.

Dimensions and weights are approximate and subject to variation.

WARNING: Working load limit is not to be exceeded. This chain is not tobe used for overhead lifting.

*

Sec 11_Eng_P10 10/19/05 8:04 AM Page 10

11MPage 11

HERC-ALLOY 800 GRADE 80 CHAIN

Herc-Alloy 800 chain ismanufactured from specialanalysis, hardened andtempered alloy steel; spe-cifically engineered to com-bine strength and durability.Grade 80 is the only chaingrade recommended foroverhead lifting. Embossed‘HA800’ and alternately withdate code for traceabilitypurposes.

USESOverhead lifting slings. Seehandbook CML800 for chainslings and attachments.

FINISHSatin (Other finishes uponrequest).

PACKAGINGAvailable in drums, half drums and running lengths.

SPECIFICATIONSNOMINAL SIZE LINK INSIDE WORKINGSTOCK DIA. (A) DIMENSIONS WEIGHT LOAD LIMIT

(B) (C)MM INCH DEC. WIDTH LENGTH LBS/FT KG. LBS.

25.6 17/32 1.218 1.296 1.671 10.447 11970 1210027.1 19/32 1.281 1.395 1.868 10.718 11570 1350028.0 15/16 1.315 1.454 1.006 10.906 12050 14500

10.0 13/86 1.394 1.572 1.222 11.440 13200 1710012.5 11/26 1.512 1.786 1.404 12.577 15400 1200016.0 15/86 1.630 1.854 1.734 13.873 18200 1810020.0 13/46 1.787 1.052 2.000 16.315 12800 28300

22.4 17/86 1.875 1.136 2.250 17.764 15500 3420026.0 17/86 1.024 1.349 2.663 19.954 21600 4770032.0 11/46 1.260 1.656 3.250 15.709 32800 72300

Dimensions and weights are approximate and subject to variation.

WARNING: Working load limit is not to be exceeded.

Sec 11_Eng_P11 10/19/05 8:04 AM Page 11

CHAIN IS OUR BUSINESS

Kiln Chain: Available in various grades includingstainless steel for high temperature ser-vice.

Incalloy or Monel: For use where high temperature or corro-sion resistance is a requirement.

Stainless Chain: Available in both 304, 316 and 347grades in both welded and unwelded con-ditions for use in the pulp and paper andfood processing industries.

Aluminum Chain: Has many applications in the oil andpetroleum industries and is available invarious grades in the welded or unweldedcondition.

Brass or Bronze Chain: For decorative applications.

Trailer Safety Chain; Machine and Twist Link Chain; ChandelierChain; Jack Chain; Lock Link Chain; Tenso Chain; Sash Chain;Plumber’s Chain; Conveyer Chain; Drilling Chain; as well as manyothers designed for specific applications.

Let us know your requirements.

11MPage 12

Sec 11_Eng_P12 10/19/05 8:04 AM Page 12

TYPES OF CHAIN(S) STOCKED

1. Sash 4. Jack2. Sash 5. Safe or Register3. Twist Link Machine 6. Sash

1. Coil 4. Coil2. Sash 5. Twist Link3. Twist Link Machine 5. Tire Cross

11MPage 13

Sec 11_Eng_P13 10/19/05 8:04 AM Page 13

11MPage 14

TYPES OF CHAIN(S) STOCKED

1. Coil 4. Lock Link2. Passing Link 5. Coil3. Lock Link

1. Coil 4. Lock Link2. Jack 5. Coil3. Chandelier

Sec 11_Eng_P14 10/19/05 8:04 AM Page 14

MARINÉ APPLICATIONS

A ship without an anchor is a ship in trouble.

Chain Size: 23⁄4" (70 mm) 56,000 lbs.Anchor weight: 14,286 lbs. (7 ton)

Call our Chain Division for service at 1-888-624-2467.

STUD LINK ANCHOR CHAIN:

Can be supplied in various grades and sizes with Lloyds or ABScertificates. Used stud link anchor chain available upon requestfor use in crushing chutes and mining operations.

MARINE CHAIN:

Mooring chain available from 1⁄2 in. up to 2 in.

MIDLINK CHAIN:

Specially designed for the fishing industry.

We invite your inquiries for the above chains as well as for fittingsand anchors.

We are also equipped to proof test your chains or fittings on ourapproved testing equipment.

11MPage 15

Sec 11_Eng_P15 10/19/05 8:04 AM Page 15

GENERAL LIFTING EQUIPMENT

Plate or Beam 1⁄2 ton through 20 ton.Clamps: May be incorporated with

chain slings upon request.

AUTOMOBILE, TRUCK & TRACTOR CHAINS

Availablein

completesets &

components

SINGLE WHEEL

11MPage 16

DUAL WHEEL

DUAL WHEEL – TRIPLE RIM

Sec 11_Eng_P16 10/19/05 8:04 AM Page 16

TYPICAL HOOKS,SOME OF WHICH CAN BE FITTED

WITH SAFETY LATCHES

11MPage 17

Sec 11_Eng_P17 10/19/05 8:04 AM Page 17

ALLOY HAMMERLOK COUPLING LINKDependable and easy to use for fast, on-the-job assembly; forattaching chain to master links and eye-type hooks, and installingnew body chain in old slings.

CHAIN SIZE (INCHES) 7⁄329⁄32

3⁄8 1⁄2 5⁄8 3⁄4 7⁄8 1 11⁄4

Working load limit (lbs.)* 2,100 3,500 7,100 12,000 18,100 28,300 34,200 47,700 72,300

Code no. 664220 664228 664241 664250 664262 664275 664287 664300 664325

A 1⁄4 5⁄161⁄2 11⁄16

13⁄1615⁄16 13⁄64 11⁄4 117⁄32

Dimensions B 113⁄32 113⁄16 213⁄32 33⁄8 41⁄16 425⁄32 51⁄8 53⁄4 613⁄16

(inches) C 31⁄645⁄8 53⁄64 17⁄32 11⁄2 151⁄64 129⁄32 23⁄16 25⁄8

E** 13⁄321⁄2 3⁄4 1 11⁄4 11⁄2 13⁄4 2 21⁄4

Max. width 15⁄16 111⁄16 27⁄32 31⁄8 3111⁄16 45⁄16 55⁄16 63⁄16 73⁄4

Weight each (lbs.) .12 .23 .65 1.50 2.60 3.80 6.30 9.30 17.30

**Caution: this working load limit should not be exceeded.**Diameter of stock of largest link intended to be used with Hammerlok.

11MPage 18

STUD ASSEMBLY1-REQUIRED

LOAD PIN1-REQUIRED

COUPLING LINK2-REQUIRED

Sec 11_Eng_P18 10/19/05 8:04 AM Page 18

SCREW PIN CHAIN SHACKLES

Working Load Dimensions in inchesSize PoundsLimit*“A” in Per 100 PinInches Tons Kgs. Pieces Dia. B C D F

11⁄44 111⁄2 10.454 3,011 15⁄16 17⁄882 115⁄32 111⁄16

15⁄16 113⁄4 10.680 3,017 13⁄88 17⁄882 117⁄32 113⁄16

13⁄88 113⁄4 10.907 3,030 17⁄16 11⁄482 121⁄32 131⁄16

17⁄16 111⁄2 11,360 3,046 11⁄28 11⁄282 123⁄32 11⁄888

11⁄28 123⁄4 11,810 3,075 15⁄88 111⁄16 113⁄16 15⁄168

15⁄88 131⁄4 12,950 3,130 13⁄48 211⁄16 11⁄163 19⁄168

13⁄40 143⁄4 14,310 3,220 17⁄88 25⁄162 11⁄403 17⁄888

17⁄88 161⁄2 15,900 3,360 15⁄88 213⁄16 17⁄166 21⁄868

15⁄88 181⁄2 17,710 3,450 11⁄88 31⁄461 111⁄16 23⁄868

11⁄80 191⁄2 18,620 3,650 11⁄48 31⁄202 113⁄16 23⁄488

11⁄48 121⁄2 10,890 3,930 13⁄88 311⁄16 27⁄166 31⁄868

13⁄88 131⁄2 12,250 1,100 11⁄28 41⁄260 21⁄400 31⁄468

11⁄20 171⁄2 15,420 1,500 15⁄88 51⁄202 23⁄800 31⁄288

13⁄48 251⁄2 22,700 2,700 23⁄88 57⁄800 27⁄866 41⁄468

23⁄88 351⁄2 31,750 3,800 21⁄48 63⁄460 31⁄400 47⁄868

21⁄40 401⁄2 36,290 4,700 21⁄28 71⁄202 33⁄400 51⁄288

21⁄28 551⁄2 49,900 7,100 23⁄88 81⁄160 41⁄866 51⁄268

11MPage 19

Sec 11_Eng_P19 11/29/05 9:43 PM Page 19

SCREW PIN ANCHOR SHACKLES

Working Load Dimensions in inchesSize PoundsLimit*“A” in Per 100 PinInches Tons Kgs. Pieces Dia. B C D E F

13⁄16 111⁄3 10.302 3,015 11⁄48 107⁄88 13⁄888 119⁄32 19⁄168

11⁄40 111⁄2 10.454 3,010 15⁄16 011⁄88 115⁄32 125⁄32 111⁄16

15⁄16 113⁄4 10.680 3,020 13⁄88 011⁄48 117⁄32 127⁄32 113⁄16

13⁄88 111⁄2 11,907 3,036 17⁄16 011⁄28 121⁄32 11⁄328 131⁄32

17⁄16 111⁄2 11,360 3,052 11⁄28 013⁄46 123⁄32 15⁄328 11⁄888

11⁄28 121⁄4 11,810 3,180 15⁄88 0211⁄1 113⁄16 15⁄168 15⁄168

15⁄80 131⁄4 12,950 3,150 13⁄48 021⁄22 11⁄160 111⁄16 19⁄168

13⁄48 143⁄4 14,310 3,250 17⁄88 0313⁄1 11⁄486 21⁄868 17⁄888

17⁄80 161⁄2 15,900 3,400 17⁄88 031⁄42 17⁄160 21⁄488 21⁄888

15⁄88 181⁄2 17,710 3,500 11⁄88 033⁄46 111⁄16 21⁄268 23⁄868

11⁄80 191⁄2 18,620 3,700 11⁄48 041⁄40 113⁄16 215⁄16 25⁄868

11⁄48 121⁄2 10,890 1,000 13⁄88 041⁄20 27⁄166 31⁄468 31⁄288

13⁄88 131⁄2 12,250 1,300 11⁄28 051⁄46 21⁄400 35⁄868 31⁄468

11⁄20 171⁄2 15,420 1,600 15⁄88 053⁄46 23⁄800 37⁄888 31⁄268

13⁄48 201⁄2 18,140 2,300 13⁄48 061⁄40 25⁄866 41⁄468 35⁄868

23⁄88 351⁄2 31,750 4,000 21⁄48 073⁄46 31⁄400 53⁄468 47⁄868

21⁄40 401⁄2 36,290 5,000 21⁄28 091⁄46 33⁄400 61⁄288 51⁄288

21⁄28 551⁄2 49,900 9,000 23⁄48 109⁄16 41⁄866 71⁄468 51⁄268

11MPage 20

Sec 11_Eng_P20 11/29/05 9:43 PM Page 20

LINK AND RINGSWeldless end links• Self Colored or Hot Dip galvanized.• Forged carbon steel – Quenched and Tempered

Stock No. Working DimensionsSize Load Weight (in.)(A) G-340 S-340 Limit Each

(in.) Galv. S.C. (lbs.) (lbs.) B C D

15⁄16 1014057 1014066 12500 .15 .50 1.75 1.1813⁄81 1014075 1014084 13800 .23 .56 1.88 1.3811⁄21 1014093 1014100 16500 .45 .75 2.38 1.8115⁄81 1014119 1014128 19300 .95 1.00 3.25 2.3213⁄41 1014137 1014146 14000 1.51 1.13 3.50 2.6817⁄81 1014155 1014164 12000 2.75 2.00 5.13 3.7517⁄81 1014173 1014182 15200 3.95 2.25 5.75 4.2511⁄41 1014191 1014208 26400 7.30 2.50 7.00 5.0013⁄81 1014217 1014226 30000 10.38 2.75 7.75 5.50

Weldless sling links

Stock No. Working DimensionsSize Load Limit Weight (in.)(A) G-341 S-341 Single Pull Each

(in.) Galv. S.C. (lbs.) (lbs.) B C D E F

13⁄8 1013897 1013904 11800 11.13 1.13 1.75 13.00 2.25 1.3811⁄2 1013913 1013922 12900 11.55 1.50 1.00 14.00 3.00 1.5015⁄8 1013931 1013940 14200 11.10 1.87 1.25 15.00 3.75 1.6313⁄4 1013959 1013968 16000 11.95 2.25 1.50 16.00 4.50 1.7517⁄8 1013977 1013986 18300 12.78 2.63 1.75 17.00 5.25 1.8817⁄8 1013995 1014002 10800 14.30 3.00 2.00 18.00 6.00 1.0011⁄4 1014011 1014020 16750 18.50 4.00 2.50 10.25 7.50 1.2513⁄8 1014039 1014048 20500 11.50 4.13 2.75 11.00 8.25 1.38

Weldless rings

Working DimensionsSize S-643 Load Limit Weight (in.)(A) Stock No. Single Pull Each

(in.) S.C. (lbs.) (lbs.) B C

7⁄8 x 4 1013780 17200 12.70 4.00 5.757⁄8 x 51⁄2 1013806 15600 13.40 5.50 7.251 x 4 1013824 10800 13.50 4.00 6.00

11⁄8 x 6 1013842 10400 16.50 6.00 8.2511⁄4 x 5 1013860 17000 17.00 5.00 7.5013⁄8 x 6 1013888 19000 10.63 6.00 8.75

11MPage 21

Sec 11_Eng_P21 11/29/05 9:43 PM Page 21

11MPage 22

SHOULDER NUT EYE BOLTForged Steel – Quenched & Tempered

Special Eyebolts with larger eye and longer shanks available.Also plain, pattern and blank.

Size A B C D E F

11⁄46 x 123⁄4 1.25 1.50 1.88 1.19 1.50 12.0011⁄46 x 143⁄4 1.25 1.50 1.88 1.19 2.50 14.0015⁄16 x 121⁄4 1.31 1.62 1.12 1.25 1.50 12.2515⁄16 x 141⁄4 1.31 1.62 1.12 1.25 2.50 14.2513⁄86 x 121⁄2 1.38 1.75 1.38 1.31 1.50 12.5013⁄86 x 141⁄2 1.38 1.75 1.38 1.31 2.50 14.5011⁄26 x 131⁄4 1.50 1.00 1.75 1.38 1.50 13.2511⁄26 x 163⁄4 1.50 1.00 1.75 1.38 3.00 16.0015⁄86 x 143⁄4 1.62 1.25 2.25 1.50 2.00 14.0015⁄86 x 163⁄4 1.62 1.25 2.25 1.50 3.00 16.0013⁄46 x 141⁄2 1.75 1.50 2.75 1.62 2.00 14.5013⁄46 x 163⁄4 1.75 1.50 2.75 1.62 3.00 16.0017⁄86 x 153⁄4 1.88 1.75 3.25 1.75 2.50 15.0017⁄86 x 183⁄4 1.88 1.75 3.25 1.75 4.00 18.0011⁄46 x 163⁄4 1.00 2.00 3.75 1.88 3.00 16.0011⁄46 x 193⁄4 1.00 2.00 3.75 1.88 4.00 19.0011⁄46 x 183⁄4 1.25 2.50 4.50 1.00 4.00 18.0011⁄46 x 123⁄4 1.25 2.50 4.50 1.00 4.00 12.0011⁄26 x 153⁄4 1.50 3.00 5.50 1.25 6.00 15.00

Working Load WeightSize G H J Limit-lbs.* Lbs. per 100

11⁄46 x 123⁄4 12.94 1.50 1.47 1,1500 1116.2511⁄46 x 143⁄4 14.94 1.50 1.47 1,1500 1119.8815⁄16 x 121⁄4 13.50 1.69 1.56 1,1800 111211.15⁄16 x 141⁄4 15.50 1.69 1.56 1,1800 111711.13⁄86 x 121⁄2 13.97 1.78 1.66 11,200 1120.5113⁄86 x 141⁄2 15.97 1.78 1.66 11,200 1127.5111⁄26 x 131⁄4 15.12 1.00 1.91 12,200 114211.11⁄26 x 163⁄4 17.88 1.00 1.91 12,200 115911.15⁄86 x 143⁄4 16.44 1.31 1.12 13,500 118311.15⁄86 x 163⁄4 18.44 1.31 1.12 13,500 119911.13⁄46 x 141⁄2 17.44 1.56 1.38 15,200 114311.13⁄46 x 163⁄4 18.94 1.56 1.38 15,200 11771.117⁄86 x 153⁄4 18.47 1.84 1.56 17,200 122311.17⁄86 x 183⁄4 11.47 1.84 1.56 17,200 126611.11⁄46 x 163⁄4 19.97 2.09 1.81 10,000 13561.111⁄46 x 193⁄4 12.97 2.09 1.81 10,000 14201.111⁄46 x 183⁄4 12.72 2.47 2.28 15,200 16801.111⁄46 x 123⁄4 16.72 2.47 2.28 15,200 17001.111⁄26 x 153⁄4 20.75 3.00 2.75 21,400 14001.1

Sec 11_Eng_P22 11/29/05 9:43 PM Page 22

11MPage 23

TURNBUCKLES

HOOK and HOOK

EYE and EYEHOOK and EYE

JAW and JAW

JAW and EYE

STUB END BODY ONLY

NYLON AND WIRE MESH SLINGS

BALL BEARING SWIVELS

Sec 11_Eng_P23 11/29/05 9:43 PM Page 23

11MPage 24

MIN-MAX WeightChain Size Pounds

Inches Each5⁄16 - 3⁄8 11.003⁄86 - 1⁄2 13.701⁄26 - 5⁄8 14.38

L-140

L-140 RATCHET TYPE

MIN-MAX WeightChain Size Pounds

Inches Each5⁄16 - 3⁄8 16.73⁄86 - 1⁄2 19.01⁄26 - 5⁄8 13.5

L-150

L-150 WITH STANDARD HOOKS

ANTI-KICK SAFETY LOADBINDER

Sec 11_Eng_P24 11/29/05 9:43 PM Page 24

11MPage 25

WIRE ROPE ANDWIRE ROPE FITTINGS

Available in lengths or as a sling assembly. Available in natural finish,galvanized and stainless steel, along with a complete range of wire ropefittings.

SINGLE DOUBLE TRIPLE

SINGLE DOUBLE TRIPLE

WE INVITE ENQUIRIES FOR A FULL RANGE OF SHEAVES

SAMPLE BLOCKS

Sec 11_Eng_P25 11/29/05 9:44 PM Page 25

11MPage 26

We can supply Gauged Link Chain to suit most standard types of ChainHoists and have facilities to inspect, repair, and test complete range ofHand Hoisting equipment.

Ratchet Pullers Differential Hoists Hand Hoists3⁄4 ton to 6 tons 1⁄4 ton to 11⁄2 tons 1⁄2 ton to 10 tons

Trolleys1⁄2 ton to 12 tons

Electric Hoist1⁄8 ton to 2 ton-chain

1⁄2 ton to 5 ton wire-rope

HAND AND ELECTRIC HOISTS

Sec 11_Eng_P26 11/29/05 9:44 PM Page 26