annex to iso/iec 17065:2012 declaration of accreditation for

Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001

of DEKRA Certification B.V.

This annex is valid from: 14-11-2018 to 01-05-2022 Replaces annex dated: 05-11-2018

Location(s) where activities are performed under accreditation

Head Office

Meander 10516825 MJArnhemThe Netherlands

Dutch Accreditation Council RvA of 29

This annex has been approved by the Board of theDutch Accreditation Council, on its behalf,

J.A.W.M. de HaasDirector of Operations

Location Certification Scheme

DEKRA Certification B.V. Head officeMeander 10516825 MJ ArnhemThe Netherlands

KEMA-KEUR, ENEC, Low power measurements, Powercapacitors - Low-voltage power factor correction banks,CCV-Certificatieschema, National Guideline for theKOMO®, EMC Directive, ATEX Directive, Machinerydirective, EPA Energy Star program, NTA 8081,Construction products regulation (CPR)

Unit 1-14, 6/F Fuk Shing Commercial Building,Fanling, 28 On Lok Mun StreetHong KongChina

KEMA-KEUR, Low power measurements.

10F #250 Jiangchangsan Road, Building 16Headquarter Economy Park, Shibei Hi-Tech Park200436 ShanghaiChina


DEKRA House, Block A3No 3 Qiyun Road510630 GuangzhouChina


Product1 / ProductGroup

Certification Scheme2 Standard / normativedocument3

1 Definitions in accordance with ISO 9000:2005, 3.4.22 If there is a referral to a scope (Sxxx), this constitutes a scheme of an accepted scheme owner. The accepted version is mentioned on the concerning scope of the scheme owner.3 For normative documents the most current version of the document is mentioned. In case of schemes for which reference is made to an accepted scheme owner, the version indicated in the scopeof acceptance is meant.



This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018




Location Arnhem

Cables and cords(CABL)

KEMA-KEUR

Initial assessment:

Type approval Initial inspection production location

Surveillance:

Routine Inspection production location Re-examination

IEC 60227*IEC 60245*IEC/EN 60799EN 13501EN 50143EN 50214EN 50525EN 50288EN 50399EN 50618HD 21 / HD 22HD 603HD 604IEC 60055IEC 60092IEC 60141IEC 60502IEC 60800IEC 60840IEC 61089IEC 62067IEC 62271-209NEN 3172NEN 3616NEN 3619NEN 3620NEN 3630NF C34-125IEEE Std 404IEEE Std 48DEKRA K 42DEKRA K 102DEKRA K 145DEKRA K 146DEKRA K 151DEKRA K 152DEKRA K 156DEKRA K 157DEKRA K 158DEKRA K 160DEKRA K 161







KEMA-KEUR

Initial assessment:


Surveillance:


DEKRA K 162DEKRA K 163DEKRA K 164DEKRA K 165DEKRA K 167DEKRA K 168DEKRA K 169DEKRA K 170DEKRA K 171DEKRA K 175DEKRA K 176DEKRA K 177DEKRA K 178DEKRA K 179BS 6004, BS 6007BS 4553, BS 5467BS 6231, BS 6346BS 6387, BS 6500BS 6622, BS 6724BS 6883, BS 7211BS 7629, BS 7835BS 7846, BS 7889BS 8491, BS EN 50288-7DIN VDE 0815DIN VDE 0250


KEMA-KEUR<HAR>

Initial assessment:


Surveillance:


EN 50143EN 50214EN 50525HD 21HD 22

Capacitors ascomponents

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60252IEC/EN 60384IEC/EN 61048IEC 60358IEC 60831IEC 60871







Switches and automaticcontrols(CONT)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60691IEC/EN 60730*IEC/EN 60934IEC/EN 61095*IEC 62271-1IEC 62271-100IEC 62271-101IEC 62271-102IEC 62271-103IEC 62271-104IEC 62271-105IEC 62271-110IEC 62271-200IEC 62271-201IEC 62271-202IEC 62271-203EN 50152-1IEEE Std C37.09IEEE Std C37.081IEEE Std C37.60IEEE Std C37.013IEEE Std C37.34IEEE Std C37.41IEEE Std C37.73IEEE Std C37.122ANSI C37.20.2ANSI C37.41ANSI C37.54ANSI C37.55ANSI C37.72ANSI/IEEE C37.21

ENEC

Initial assessment:


Surveillance:


IEC/EN 60730







Household equipment(HOUS)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60204IEC/EN 60335*IEC/EN 61770IEC/EN 62233EN 50366

ENEC

Initial assessment:


Surveillance:


IEC/EN 60335*IEC/EN 62233EN 50366

Low power measurements IEC/EN 62301

Installation accessoriesand connection devices(INST)

KEMA-KEUR

Initial assessment:


Surveillance:


DEKRA K 24DEKRA K 55IEC/EN 60309*IEC/EN 60320*IEC/EN 60335-2-76IEC/EN 60669*IEC/EN 60670*IEC/EN 60974IEC/EN 60998*IEC/EN 61058*IEC/EN 61242*IEC/EN 61316IEC/EN 61386IEC/EN 61534*IEC/EN 61537BS/EN 61537IEC/EN 61984*IEC/EN 62094EN 50075EN 50066EN 50085EN 50086








KEMA-KEUR

Initial assessment:


Surveillance:

Routine Inspection production location

Re-examination

EN 50146EN 50250EN 50393NEN 1251NEN 1020IEC 60884IEC 61238IEC 62080BS 546BS 1363-1BS 1363-2BS 1363-3BS 1363-4BS 4573BS 5733SS 145NF C61-314DIN VDE 0620-1DIN VDE 0620-2-1IEC/EN 61535EN 50428SEV 1011CEI 23-50NBN C 61-112-1NEK IEC 60884-1NEK 502ÖVE/ÖNORM E 8620-2ÖVE/ÖNORM E 8620-3ÖVE/ÖNORM E 8620-4ÖVE/ÖNORM E 8620-5ÖVE/ÖNORM E 8684-1SFS 5610SS 428 08 34DS 60884-2-D1UNE 20315-1-1UNE 20315-1-2

ENEC

Initial assessment:


Surveillance:


IEC/EN 50075IEC/EN 60998*IEC/EN 60309*IEC/EN 60799IEC/EN 60320*IEC/EN 61058*IEC/EN 61535







Lighting(LITE)

KEMA-KEUR

Initial assessment:


Surveillance:

Routine Inspection production location Re-examination Or pre-shipment inspection

IEC/EN 60155*IEC/EN 60238*IEC/EN 60400*IEC/EN 60570*IEC/EN 60598*IEC/EN 60838*IEC/EN 60921*IEC/EN 60923IEC/EN 60925IEC/EN 60927IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61047IEC/EN 61050IEC/EN 61184IEC/EN 61347*IEC/EN 62031IEC/EN 62035IEC/EN 62384IEC/EN 62471IEC/EN 62493IEC/EN 62560IEC/EN 62776IEC/EN 62838

ENEC

Initial assessment:


Surveillance:


IEC/EN 60155*IEC/EN 60238*IEC/EN 60400*IEC/EN 60570*IEC/EN 60598*IEC/EN 60921IEC/EN 60923IEC/EN 60925IEC/EN 60927IEC/EN 60929IEC/EN 61047IEC/EN 62031IEC/EN 62384IEC/EN 62471IEC/EN 61347*IEC/EN 60838*IEC/EN 60968*IEC/EN 60969*IEC/EN 62560IEC/EN 61184IEC/EN 62776







Measuring instruments(MEAS)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 61010*IEC/EN 61243IEC/EN 60044IEEE Std C57.13

Electrical equipment formedical use(MED)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60601*IEC/EN/ISO 80601HD 395

IT and office equipment(OFF)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60825IEC/EN 60950*IEC/EN 62040*IEC/EN 62368*EN 41003

ENEC

Initial assessment:


Surveillance:


IEC/EN 60950*IEC/EN 62368*







Switching equipment(POW)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60947*IEC/EN 60282IEC/EN 62208EN 50178IEC 60470IEC 60549IEC 60644EN 60282-1IEEE Std C37.41IEEE Std C37.60ANSI C37.44

Schakelmaterieel(POW)

Power capacitors - Low-voltage power factor correctionbanks

IEC 61921

Installation protectiveequipment(PROT)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60127*IEC/EN 60269*IEC/EN 60529*IEC/EN 60755IEC/EN 60898*IEC/EN 61008*IEC/EN 61009*IEC/EN 61643*IEC/EN 62019IEC/EN 62423IEC/EN 62640IEC 60099IEC 60137IEC 60168IEC 60383IEC 60507IEC 60660IEC 61109IEC 60815HD 630HD 639HD 60269IEEE Std 62.11ANSI C29CAN/CSA C411.1







Safety transformersand similar equipment(SAFE)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 61869-1IEC/EN 61869-2IEC/EN 61558*IEC/EN 62040IEC 60076IEC 60353CENELEC HD 538.1EN 50464-1IEEE Std. C57.12.90IEEE Std C57.21CISPR 16

ENEC

Initial assessment:


Surveillance:


IEC/EN 61558*

Portable tools(TOOL)PortableTransportableLawn and Garden

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60204-1IEC/EN 60335*IEC/EN 60745*IEC/EN 61029*IEC/EN 62233EN 50580EN/ISO 11148EN 50636-2-91EN 50636-2-92EN 50636-2-94EN 50636-2-100EN 50636-2-107IEC/EN 62841*







ENEC

Initial assessment:


Surveillance:


IEC/EN 60335*IEC/EN 60745*IEC/EN 61029*IEC/EN 62233EN 50580EN 50636-2-91EN 50636-2-92EN 50636-2-94EN 50636-2-100EN 50636-2-107IEC/EN 62841*

Electronics,entertainment(TRON)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60065*IEC/EN 60491IEC/EN 62368*

Brandmeldinstallaties CCV-CertificatieschemaLeveren Brandmeldinstallaties

Initiële audit: Audit organisatie Inspectie product

Jaarlijks toezicht: Audit organisatie Inspectie product

(NAP-0163)

CCV-CertificatieschemaBrandmeldinstallaties

Brandmeldinstallaties CCV-CertificatieschemaInstalleren Brandmeldinstallaties

Initiële audit: Audit organisatie Inspectie product

Jaarlijks toezicht: Audit organisatie Inspectie product

(NAP-0164)

CCV-CertificatieschemaInstallerenBrandmeldinstallaties







Brandmeldinstallaties CCV-CertificatieschemaOnderhoud Brandmeldinstallaties

Initiële audit: Audit organisatie Inspectie dienst

Jaarlijks toezicht: Audit organisatie Inspectie dienst

(NAP-0165)

CCV-CertificatieschemaOnderhoudBrandmeldinstallaties

Ontruimings-alarminstallaties

CCV-CertificatieschemaLeveren Ontruimingsalarminstallaties met deelaccreditatie:

Type B + attentiepanelen

Initieel onderzoek: Inspectie product Audit ondersteunend managementsysteem

Periodiek toezicht: Inspectie product Audit ondersteunend managementsysteem

(NAP-0168)

CCV-CertificatieschemaOntruimings-alarminstallaties


CCV-CertificatieschemaInstalleren Ontruimingsalarminstallaties:

Initieel onderzoek: Inspectie product Audit ondersteunend managementsysteem

Periodiek toezicht: Inspectie product Audit ondersteunend managementsysteem

(NAP-0169)

CCV-CertificatieschemaInstallerenOntruimings-alarminstallaties


CCV-CertificatieschemaOnderhoud Ontruimingsalarminstallaties:

Initieel onderzoek: Inspectie dienst Audit ondersteunend managementsysteem

Periodiek toezicht: Inspectie dienst Audit ondersteunend managementsysteem

(NAP-0170)

CCV-CertificatieschemaOnderhoudOntruimings-alarminstallaties







Sustainably producedbiomass

NTA 8081: Certification scheme for sustainablyproduced biomass for energy purposes, for the scopes:

A1 (organisations for which all requirements areapplicable)

A3 (producer) B (processor) C (trader) D (end-user)

(NAP-0182)

NTA 8080

Sustainably procucedbiomass for bio-energyand biobased products

NCS 8080: Certificatieschema voor duurzaamgeproduceerde biomassa voor bio-energie en biobasedproducten voor de scope:

- biomassaproducent- smallholder- inzamelaar primaire reststromen- inzamelaar niet-primaire reststromen- processor- trader- end-user

Audit van productieproces biomassa en audit van proces vanketenbeheer

Verificatie van variabele inputwaarden op locatie (indien vantoepassing)

(NAP-0207)

NTA 8080-1NTA 8080-2

National guideline for the KOMO®-, respectively the NL-EPBD®- process certificate for“EnergiePrestatieAdvisering” (Energy Performance Advice)

Existing residences Issuing an “Energielabel” (Energy Label), ExistingResidences

Initial audit: Organisation audit Project inspection

Annual surveillance: Organisation audit Project inspection

(NAW-0156)

BRL 9500-00BRL 9500-01

Issuing an “EPA-Maatwerkrapport” (Energy PerformanceAdvice - Tailor-made report), Existing Residences

Initial audit:

BRL 9500-00BRL 9500-02







Organisation audit Project inspection


(NAP-0157)

Existing utility buildings Issuing an “Energielabel” (Energy Label), Existing Utilitybuildings



(NAW-0158)

BRL 9500-00BRL 9500-03

Issuing an “EPA-Maatwerkrapport” (Energy PerformanceAdvice - Tailor-made report), Existing Utility buildings



(NAP-0159)

BRL 9500-00BRL 9500-04

EPA Energy Star Program

LITE Energy Star ENERGY STAR® ProgramRequirements for Lamps(Light Bulbs)

ENERGY STAR® ProgramRequirements for DecorativeLight Strings

ENERGY STAR® ProgramRequirements forLuminaires







Directive 2006/42/ECMachinery

The accreditation for the specified activities is suitable for notification

Product / productgroup

Module / article Conformity assessmentprocedure

1. Circular saws(single- or multi-blade)for working with woodand material withsimilar physicalcharacteristics or forworking with meat andmaterial with similarphysical characteristics,of the following types:

1.1. Sawingmachinery with fixedblade(s) duringcutting, having afixed bed or supportwith manual feed ofthe workpiece orwith a demountablepower feed;1.2. Sawingmachinery with fixedblade(s) duringcutting, having amanually operatedreciprocating saw-bench or carriage;1.3. Sawingmachinery with fixedblade(s) duringcutting, having abuilt-in mechanicalfeed device for theworkpieces, withmanual loadingand/or unloading;

1.4. Sawingmachinery withmovable blade(s)during cutting,having mechanicalmovement of the

EC-type examination Annex IX







blade, with manualloading and/orunloading.

2. Hand-fed surfaceplaning machinery forwoodworking.


3. Thicknessers forone-side dressinghaving a built-inmechanical feeddevice, with manualloading and/orunloading forwoodworking.


4. Band-saws withmanual loading and/orunloading for workingwith wood and materialwith similar physicalcharacteristics or forworking with meat andmaterial with similarphysical characteristics,of the following types:

4.1. Sawingmachinery with fixedblade(s) duringcutting, having afixed orreciprocating-movement bed orsupport for theworkpiece;

4.2. Sawingmachinery withblade(s) assembledon a carriage withreciprocatingmotion.


5. Combined machineryof the types referred to








in points 1 to 4 and inpoint 7 for working withwood and material withsimilar physicalcharacteristics.

6. Hand-fed tenoningmachinery with severaltool holders forwoodworking.


7. Hand-fed verticalspindle mouldingmachinery for workingwith wood and materialwith similar physicalcharacteristics.


8. Portable chainsawsfor woodworking. EC-type examination Annex IX

Directive 2014/30/EUElectromagnetic compatibility


Electric and electronicappliances (apparatuswith electrical and/orelectronic parts liable togenerateelectromagneticdisturbance, or theperformance of which isliable to be affected bysuch disturbance)

EU-type examination (module B) Annex III, part A

Directive 2014/34/EUEquipment and protective systems intend for use in potentially explosive atmospheres


Equipment category M1 EU-type examination (module B) Annex III







of equipment-group I –electrical equipmentand non-electricalequipment

Conformity to type based on quality assurance of theproduction process (module D)

Annex IV

Conformity to type based on product verification (moduleF)

Annex V

Conformity based on unit verification (module G) Annex IX

Equipment category 1of equipment-group II,explosive atmospheredue to gases, vapoursor mists – electricalequipment and non-electrical equipment

EU-type examination (module B) Annex III


Annex IV


Annex V


Equipment category 1of equipment-group II,explosive atmospheredue to air/dust mixtures– electrical equipmentand non-electricalequipment



Annex IV


Annex V


Equipment category M2of equipment-group I –electrical equipment


Conformity to type based on internal production controlplus supervised product testing (module C1)

Annex VI

Equipment category M2of equipment-group I –non-electrical

Communication of technical documentation for internalproduction control

Article 13, sub 1b-ii andAnnex VIII







equipment

Equipment category M2of equipment-group I –electrical equipmentand non-electricalequipment

Conformity to type based on product quality assurance(module E)

Annex VII


Equipment category 2of equipment-group II,explosive atmospheredue to air/dust mixture– electrical equipment



Annex VI


Annex VII

Equipment category 2of equipment-group II,explosive atmospheredue to air/dust mixture– non-electricalequipment

Communication of technical documentation for internalproduction control


Equipment category 2of equipment-group II,explosive atmospheredue to air/dust mixture– electrical equipmentand non-electricalequipment


Equipment category 2of equipment-group II,explosive atmospheredue to gases, vapoursor mists – electricalequipment



Annex VI


Annex VII







Equipment category 2of equipment-group II,explosive atmospheredue to gases, vapoursor mists – non-electrical equipment

Communication of the technical documentation as part ofinternal production control


Equipment category 2of equipment-group II,explosive atmospheredue to gases, vapoursor mists – electricalequipment and non-electrical equipment


Equipment category 3of equipment-group II


Protective systems EU-type examination (module B) Annex III

Conformity to type based on product verification(module F) Annex V


Components EU-type examination (module B) Annex III


Annex IV


Annex VII


Annex V

Conformity to type based on internal production controlplus supervised product testing (module C1);

Annex VI









European construction products regulation No. 305/2011

Product area 31

Decision 2011/284/ECPower, control andcommunication cables

European construction products regulation 305/2011,

System 1+, Certification of constancy of performance

EN 50575:2014+A1:2016

Location Shanghai


KEMA-KEUR

Initial assessment: Type approval Initial inspection production location

Surveillance: Routine Inspection production location Re-examination Or pre-shipment inspection

IEC/EN 60204IEC/EN 60335*IEC/EN 62233EN 50366


Lighting(LITE)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60155*IEC/EN 60238*IEC/EN 60400*IEC/EN 60570*IEC/EN 60598*IEC/EN 60838*IEC/EN 60921*IEC/EN 60923IEC/EN 60925IEC/EN 60927IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61047IEC/EN 61050







IEC/EN 61184IEC/EN 61347*IEC/EN 62031IEC/EN 62035IEC/EN 62384IEC/EN 62560EN 61050IEC/EN 62493IEC/EN 62311IEC/EN 62471*IEC/EN 62493IEC/EN 62479IEC/EN 60901IEC/EN 60081IEC/EN 61195IEC/EN 61199IEC/EN 60432-1IEC/EN 60432-2IEC/EN 60432-3

Measuring instruments(MEAS)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 61010*IEC/EN 61243IEC/EN 60044IEEE Std C57.13


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60825IEC/EN 60950*IEC/EN 62040*EN 41003


KEMA-KEUR

Initial assessment:

IEC/EN 60044*IEC/EN 61558*IEC/EN 62040








Surveillance:


IEC/EN 60289IEC 60076IEC 60353EN 50091CENELEC HD 428.1CENELEC HD 538.1IEEE Std. C57.12.90IEEE Std C57.21NEMA 107CISPR 16

Portable tools(TOOL)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60745*IEC/EN 61029*IEC/EN 60335* (Gardening)IEC/EN 62233IEC/EN 60204EN 50144EN 50260EN 792EN/ISO 11148


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60065*IEC/EN 60491

Battery(BATT)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 62133







Or pre-shipment inspection


KEMA-KEUR

Initial assessment:


Surveillance:


K 175K 178K 179EN 50525EN 50618DKE AK 411.2.3VDE-AR-E 2283-4IEC 60227IEC 60245IEC 60502EN 50214IEC/EN 61386EN 62275EN 50117EN 50288IEC 60966ISO 6722DIN 72553

Electric Vehicle(ELVH)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 61851IEC/EN 62196IEC/EN 61439K180


KEMA-KEUR

Initial assessment:


Surveillance:


IEC 60884*EN 50075NEN 1020DIN VDE 0620-1DIN VDE 0620-2-1DIN VDE 0680-1NBN C 61-112-1NF C 61-314SEV 1011CEI 23-50UNE 20315PN-IEC 60884-1SS 428 08 34SS IEC 60884-1BS 1363-1







BS 1363-2BS 546BS 4573SS 145-1SS 145-2SS 472IEC/EN 60309*CEI 23-57SFC 5610NEK 502NEK IEC 60884-1BS 5733SS 241BS 8488IEC/EN 60320*IEC/EN 61984IEC/EN 61242IEC/EN 61535IEC/EN 60669*IEC/EN 61058*IEC/EN 60998*

Installation protectiveequipment(PROT)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 61643EN 50539IEC/EN 60127

Location Guangzhou


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60335*IEC/EN 62233EN 50366








Lighting(LITE)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60598*IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61347*IEC/EN 62031IEC/EN 62471*IEC/EN 62560IEC/EN 62493IEC/EN 62311IEC/EN 62479


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60950*IEC/EN 62040-1IEC/EN 62311IEC/EN 62479


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60742IEC/EN 61558*CISPR 16


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60065*







Or pre-shipment inspection

Battery(BATT)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 62133


KEMA-KEUR

Initial assessment:


Surveillance:


IEC 60884*EN 50075NEN 1020DIN VDE 0620-1DIN VDE 0620-2-1NBN C 61-112-1NF C 61-314SEV 1011CEI 23-50UNE 20315-1-1UNE 20315-1-2PN-IEC 60884-1SS 428 08 34SS IEC 60884-1BS 1363-1BS 546BS 4573SS 145-1SS 472BS 5733SS 241BS 8488IEC/EN 60320*IEC/EN 61242*IEC/EN 61535IEC/EN 60669*IEC/EN 61058*IEC/EN 60998*

Automatic electricalcontrols for householdand similar use

KEMA-KEUR

Initial assessment:

IEC/EN 60730*







(CONT) Type approval Initial inspection production location

Surveillance:


Location Hong Kong


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60335*IEC/EN 62233EN 50366


Lighting(LITE)

KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60598*IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61347*IEC/EN 62031IEC/EN 62471*IEC/EN 62560IEC/EN 62493IEC/EN 62560IEC/EN 62471


KEMA-KEUR

Initial assessment:

IEC/EN 60950*








Surveillance:



KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 61558*


KEMA-KEUR

Initial assessment:


Surveillance:


IEC/EN 60065*

* See current list of sub set of standards on the IECEE CBTL website

annex to iso/iec 17065:2012 declaration of accreditation for

Documents