angulated multi-unit system - mis-implants.ru · the new mis angulated multi-unit abutment provides...
TRANSCRIPT
®
PATENT
PENDING
© MIS Corporation. All Rights Reserved.
Angulated Multi-Unit System
The new MIS angulated multi-unit abutment provides an added array of simplicity, compatibility, versatility and flexibility to its already successful line of abutments. The angulated multi-unit abutments fit all our standard implants and are designed for all screw-retained full and partial prosthetic appliances. The new features include 17-degree and 30-degree angulations as well as an hexagonal connection. The low profile connections enable exceptional aesthetic and a myriad of insertion angles.
2.
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentists should use these products.
3.
SimplicitySimple impression and laboratory procedures.
Versatility
Flexibility
Used in all screw retained full and partial denture appliances.
Where different angulations are needed.
4.
Characteristics.
Patent Pending
Angulated standard platform.
Features 17- and 30-degree angulation.
2.6mm 1.3mm
MA-ANH17
17º
MA-ANH30
3.2mm
1mm
30º
Extensive insertion path
The 17° multi-unit abutment allows a maximum 64° insertion path.
Recommended tightening moment of 30 Ncm.*
The 30° multi-unit abutment allows a maximum 90° insertion path.
90°^
^
^ ^
64°
Low profile enables exceptional aesthetic.
15º conic provides easier paths of insertion, especially in areas of limited space.
MA-ANH30MA-ANH17
5.
1.2mm 1.2mm
15º15º
6.
Characteristics. (continued)
Features an anti–rotational hexagon.
The multi-unit abutments are made of
titanium alloy Ti 6Al-4V ELI. The multi-unit
gripping bar is made of ‘‘Delrine ‘‘. The
multi-unit abutment can be connected
in any one of six possible positions on
the fixture head.
7.
Restorative components.
Components:
Abutment AnalogMA-RSM10
Titanium Temporary CylinderMM-T0450
Direct Plastic CylinderMM-CP045
Impression Coping for Closed TrayMM-IT450
Healing CapMH-00450
Multi-Unit ScrewdriverMT-MUK02
Multi-Unit Direct Prosthetic Gold ScrewMM-G0330
Multi-Unit Direct Prosthetic Titanium ScrewMM-S0330
Direct GoldMM-MG450
Multi-Unit Bar Gold CopingMH-BGC45
Impression Coping for Opened TrayMM-IO450
Prosthetic Possibilities.
8
Low profile enables increased insertion possibilities.
Screw-retaind
Bar over denture
Standard impression method.
Standard restorative components.
Improved aesthetic.
Improved prosthetic support.
Increased inter-implant distance.
Better implant anchorage.
Screw-retained prosthetic
9.
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.
0297
®
MIS’s Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 9342//EEC. MIS’s products are cleared for marketing in the USA and CE approved.
MC-MUA08 Rev.3
MIS Implants Technologies Ltd. www.mis-implants.com