angelantoni challenge manual
DESCRIPTION
Manual of the Challenge Cabin (temperature test)TRANSCRIPT
-
Angelantoni Industrie s.p.a.06056 Massa Martana (Pg) Italy
Tel. (++39) 075.8955.1 (a.r.)Fax (++39) 075.8955200
Internet:www.angelantoni.itE-Mail:[email protected]
Installation, use and maintenance handbook
512974
ecology project
CH
0305
-F03
R
el. 2
2120
0
CHALLENGECHALLENGE - ECHALLENGE - ES
THERMOSTATIC AND CLIMATIC CHAMBERS
SERIES
-
464 Localit Cimacolle06056 Massa Martana (Pg) Italy
DECLARATION OFCONFORMITY
Managing DirectorGianluigi Angelantoni
The machine complies with the regulations in the following EEC Directives:
Machinery Directive n 89/392 and subsequent modifications Low Voltage Directive n 73/23 and subsequent modifications Electromagnetic Compatibility Directive n 89/336 and subsequent modifications
In particular it complies with the following Standardized Norms:
EN292-1 Safety of machinery-Fundamental concepts, general principles for design-Part 1: Terminology, basicmethodology, 1991.
EN292-2 Safety of machinery-Fundamental concepts, general principles for design-Part 2: Technical specificationsand principles. 1991.
EN294 Safety of machinery-Safety distance to prevent upper limbs coming into contact with dangerous areas. 1992.
EN60204-1 Safety of machinery-Electrical equipment of the machines-Part 1: General rules. 1993.
EN50081-1 Electromagnetic compatibility-General norm on emission-Part 1: Residential, commercial and lightindustry environments.
EN 50082-2 Electromagnetic compatibility-General norm on immunity-Part 2: Industrial environment.
EN61010-1 Safety instructions for electrical apparatus to measure, and control and for laboratory use - Part 1:General instructions.
Product Name:
Manufacturer
Order/series N
Agent
Date
-
4CONTENTS
1 SUMMARY OF RATING PLATE DATA ..................... 5
2 WARNINGS .......................................................... 52.1 GENERAL WARNINGS ............................................ 52.2 WARNINGS FOR TRANSPORT AND HANDLING ... 62.3 WARNINGS FOR INSTALLATION ............................ 62.4 WARNINGS FOR PERSONNEL IN CHARGE OF
THE MACHINE ......................................................... 62.5 WARNINGS FOR MAINTENANCE ........................... 62.6 EXPLANATION OF SYMBOLS ................................. 6
3 TECHNICAL SPECIFICATIONS............................... 73.1 TECHNICAL DATA FOR CLIMATIC CHAMBERS..... 73.2 TECHNICAL DATA FOR THERMOSTATIC
CHAMBER ........................................................ 123.3 PERFORMANCE -gradients ................................... 163.4 ENVIRONMENTAL CONDITIONS .......................... 173.5 FUSES ........................................................ 18
4 HANDLING AND REMOVAL OF PACKAGING...... 194.1 PERSONNEL REQUISITES ................................... 194.2 MACHINE CONDITIONS ........................................ 194.3 EQUIPMENT NEEDED FOR HANDLING ............... 194.4 HOW TO REMOVE THE PACKAGING ................... 20
4.1.1 How to remove the outer straps ..................... 204.1.2 How to remove the cardboard casing ............ 204.1.3 How to remove the internal straps ................. 204.1.4 How to remove the wooden side blocks ........ 204.1.5 How to remove the pallet ............................... 20
5 DESCRIPTION OF THE SYSTEM .......................... 215.1 GENERAL VIEW ..................................................... 215.2 CONTROL SYSTEM ............................................... 235.3 COOLING SYSTEM ................................................ 245.4 DEHUMIDIFCATION SYSTEM ............................... 245.5 HUMIDIFICATION SYSTEM ................................... 255.6 HEATING SYSTEM................................................. 255.7 INTERNAL LIGHT ................................................... 255.8 PROBES ........................................................ 25
6 INSTALLATION ...................................................... 266.1 POSITIONING OF THE MACHINE ......................... 266.2 PLUMBING ........................................................ 27
6.2.1 Condensate drain ........................................... 276.2.2 Mains water or demineralized water supply
for humidification ............................................ 276.2.3 Water supply for condenser ........................... 28
6.3 ELECTRICAL WIRING ........................................... 296.3.1 Characteristics of the plug.............................. 296.3.2 Socket Board.................................................. 296.3.3 General specifications for the electrical system .. 296.3.4 Electrical wiring .............................................. 296.3.5 Earth connection ............................................ 306.3.6 Preferential supply for the internal computer . 306.3.7 Lamp connection for radiation and UV radiations . 306.3.8 Interface and serial port connection ............... 306.3.9 Specimen power supply connection .............. 30
7 USE FORESEEN BY THE MANUFACTURER ....... 337.1 AIM OF THE MACHINE .......................................... 337.2 MACHINE END-USE .............................................. 337.3 OPERATOR ........................................................ 337.4 USE LIMITS ........................................................ 337.5 USE OF PROTECTIVE CLOTHING ....................... 337.6 DANGEROUS AREAS AND WASTE RISKS .......... 33
8 START-UP ........................................................ 348.1 COMPRESSOR OIL HEATING ............................... 348.2 ALARM SET-UP ...................................................... 34
8.2.1 Software alarms ............................................. 358.2.2 Hardware alarms ............................................ 358.2.3 Fixed alarm for maximum temperature .......... 36
8.3 OPERATIONAL CHECK ......................................... 368.4 CONTROL OF WET BULB GAUZE (climatic chambers) . 36
9 USE ........................................................ 379.1 LOADING OF THE PRODUCT TO BE TESTED .... 379.2 SET-UP FOR A TEMPERATURE CYCLE ............... 399.3 UV LAMP (optional) ................................................ 409.4 SHUTDOWN ........................................................ 419.5 EMERGENCY SHUTDOWN ................................... 419.6 START-UP AFTER AN EMERGENCY SHUTDOWN .. 41
10 SAFETY DEVICES -CHECK AND SET-UP ............ 42
11 MAINTENANCE...................................................... 43
12 TROUBLESHOOTING ............................................ 48
13 REMOVAL FROM INSTALLATION SITE ............... 5013.1 DISASSEMBLY ....................................................... 5013.2 SCRAPPING ........................................................ 50
-
52.1 GENERAL WARNINGS
Do not carry out any operations or manoeuvres unless you are absolutely certain of their effect; if in doubt, contactyour nearest technical assistance service or the manufacturer himself.
The manufacturer will not be held responsible for damage to the machine or to objects in the following cases:- improper use of the machine- use of unsuitable personnel- incorrect assembly and installation- defects in the plant systems- unauthorized modifications or operations to the machine- use of spare parts that are not original pieces- failure to comply with the norms given in this handbook- exceptional events
This instruction handbook has been designed for the following personnel:- Personnel in charge of transport, handling and removal of packaging- Personnel in charge of the preparation of the plant systems and installation site- Installers- Personnel in charge of using the machine- Personnel in charge of maintenance
The instruction handbook indicates the use foreseen by the manufacturer and cannot ever replace adequateexperience of the operator. It can only be used as a reminder of the main operations to be carried out.
The instruction handbook should be kept carefully and should also be within easy reach for reference. If necessary,photocopy the pages concerned directly with machine use. The handbook should last at least the life-time of themachine itself.
Find the special rating plate on the machine in order to check the technical data. Check the machine model and supply voltage before carrying out any operation whatsoever. If you find any discrepancies, contact the manufacturer or your supplier immediately.
1 SUMMARY OF RATING PLATE DATA
2 WARNINGS
Industrie S.p.A.environmental chamber divisionmassa martana (pg) Italy
TypeSerial No.
CVA
Weight kg
Year%
kWHP
Gas
Gas 1Gas 2
Gasproperties
BarBar
EC compliance symbol
Series N
Model
Weight
Manufacturers address
Type of cooling gasCompressor power
Absorbed power
Min-max relative humidity
Year of manufacture
Maximum electricalabsorption
Min-max temperature
Supply voltage
Type of cooling gas 1Type of cooling gas 2
Pressure of cooling gas 1Pressure of cooling gas 2
Only for some countriers
-
6 The instruction handbook gives technical information on how the machine is manufactured at the present time; themanufacturer reserves the right to carry out any modifications he deems necessary to the machines and to theinstruction handbooks, without prior notice or replacement.
This handbook should last at least as long as the machine itself.It is, therefore, a good idea to protect it against damages.If you lose or destroy the handbook, you may ask for a copy. Please give the rating plate data (see chap. 1) in yourrequest.
2.2 WARNINGS FOR TRANSPORT AND HANDLING This symbol, placed on each packaging, indicates the weight of each package. Always check that the tools and machines to handle and transport the machine are adequate. Always keep the machine in an upright position. If the machine should accidentally turn upside-down oron its side, do not switch it on. Put it in the correct position and contact the manufacturer.
2.3 WARNINGS FOR INSTALLATION Installation should always be carried out by specialized personnel. Carefully follow the instructions on how to prepare the plant systems before installing the machine. When the installation site is being prepared, bear in mind the space and work conditions of the personnel in charge
of the machine so as to reduce to a minimum noise, fatigue, discomfort and anything else which may have a negativeinfluence on the staff.
When designing the installation site, remember to leave sufficient space for control, maintenance, cleaning, andremoval of production waste material.
Make sure there are clear notices near the machine to warn personnel who are not in charge of the dangers withingthe work range of the machine during the work cycle.
Make sure that the work site is adequately lit so that personnel can work in optimum conditions. When designing the installation site, please refer to the norms in force and in particular:
- set up all the firefighting and safety devices.
Operations that must becarried out by at least
two people.
GENERAL DANGERThis symbol is always
accompanied by anexplanation of the danger
WARNING!Important note
USE GLOVES
2.4 WARNINGS FOR PERSONNEL IN CHARGE OF THE MACHINE After a pause of over 48 hours in the work cycle, always heat the compressor
oil before carrying out any work (see paragraph 8.1). The machine may only be used by personnel who have read the rules
described in this handbook. If the chamber is opened in temperatures that differ greatly from ambient
temperatures, problems could be created: if the internal temperature ishigh, it will be very difficult to close the door because of expansion; if theinternal temperature is very low, phenomena of condensate and frostingdue to ambient humidity could occur. If the door is opened frequently inthese conditions, it is not only dangerous but could cause damage to the gaskets of the door and could obstruct theheat exchangers.
2.5 WARNINGS FOR MAINTENANCE Always disconnect the machine from the hydraulic and electrical mains supply before carrying out any maintenance
operation whatsoever. Always close all the stop valves above the machine. Do not use solvents or alcohol to clean the varnished parts as these products could damage the surface.
2.6 EXPLANATION OF SYMBOLS The symbols shown below may be found on the machine or in this instruction handbook. Pay attention to their meaning before going any further.
Very important!In order to guarantee thestandard of safety for theproducts to be tested and forthe machine, always set thesoftware and hardwaretemperaturealarms (paragraph 8.2).
121199 mod
-
73 TECHNICAL SPECIFICATIONS3.1 TECHNICAL DATA FOR CLIMATIC CHAMBERS
The climatic chambers carry out tests by controlling temperature and relative humidity
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing
(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Humidity range (with temperaturefrom +5 to +95C)
RH accuracy (no less than +/-0,25Con psychometric difference)
Dew point range for continuoustests (C)
Dew point range for discontinuoustests (C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internaltemperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE SERIE MOD. CH250 CH340 CH600 CH1200 CH1600 CH2000
224
-40 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
14
4,8
7,7
400(-25 C)
R404 A
850x1460 x1516(h1 = 47)
600x535x700
50
530
490
400
59
x
(2)
557
-40 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
20
6,5
11,1
1000(-25 C)
R404 A
1100x1705x1911(h1 = 58)
850x733x895
50
800
750
400
64
x
(2)
1152
-40 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
25
7,8
13,7
1300(-25 C)
R404 A
1250x2160x2036(h1 = 58)
1000x1130 x1020
50
1060
990
367
65
x
(2)
1535
-40 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
25
7,8
13,7
1300(-25 C)
R404 A
1250x2534x2040(h1 = 70)
1000x1505x1020
50
1370
1300
410
65
x
(2)
2040
-40 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
25
7,8
13,7
500(-25 C)
R404 A
1250x3035x2040(h1 = 70)
1000x2000x1020
50
1470
1400
369
65
x
(2)
336
-40 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
14
4,8
7,7
400(-25 C)
R404 A
850x1725x1516(h1 = 47)
600x800x700
50
600
550
375
59
x
(2)
-
8(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing
(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Humidity range (with temperaturefrom +5 to +95C)
RH accuracy (no less than +/-0,25Con psychometric difference)
Dew point range for continuoustests (C)
Dew point range for discontinuoustests (C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internaltemperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE SERIE MOD. CH250 C CH340 C CH600 C CH1200 C CH1600 C CH2000 C
224
-75 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
16,5
5,7
9
600(-55 C)
R404 A/R23
850x1460 x1516(h1 = 47)
600x535 x700
50
580
540
435
63
x
(2)
557
-75 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
25,5
8,5
14,1
1200(-55 C)
R404 A/R23
1100x1705x1911(h1 = 58)
850x733x895
50
880
830
445
66
x
(2)
1152
-75 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
31
10,3
17,2
1500(-55 C)
R404 A/R23
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1160
1090
405
68
x
(2)
1535
-75 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
31
10,3
17,2
1500(-55 C)
R404 A/R23
1250x2534x2040(h1 = 70)
1000x1505x1020
50
1470
1400
441
68
x
(2)
2040
-75 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
31,5
10,3
17,2
550(-55 C)
R404 A/R23
1250x3035x2040(h1 = 70)
1000x2000x1020
50
1570
1500
395
68
x
(2)
336
-75 +180
0,25 0,3
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
16,5
5,7
9
500(-55 C)
R404 A/R23
850x1725x1516(h1 = 47)
600x800x700
50
650
600
410
63
x
(2)
-
9(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing, only special production.
(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Humidity range (with temperaturefrom +5 to +95C)
RH accuracy (no less than +/-0,25Con psychometric difference)
Dew point range for continuoustests (C)
Dew point range for discontinuoustests (C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internaltemperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE ES SERIE MOD. CH250 ES CH340 ES CH600 ES CH1200 ES CH1600 ES CH2000 ES
224
-40 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
22
7
12
1600(-25C)
R404 A
850x1460x1516(h1 = 47)
600x535x700
50
590
550
443
60
(2)
x
557
-40 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
24
7,5
13
2500(-25C)
R404 A
1100x1705x1911(h1 = 58)
850x733x895
50
870
820
465
66
(2)
x
1152
-40 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
32,5
9,9
17,9
3500(-25C)
R404 A
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1140
1070
396
67
(2)
x
1535
-40 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
32,5
9,9
17,9
2600(-25C)
R404 A
1250x2534x2040(h1 = 70)
1000x1505x1020
50
1470
1400
440
67
(2)
x
2040
-40 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
-
-
-
-
R404 A
1250x3035x2040(h1 = 70)
1000x2000x1020
50
-
-
-
-
(2)
x
336
-40 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
22
7
12
1300(-25C)
R404 A
850x1725x1516(h1 = 47)
600x800x700
50
660
610
416
60
(2)
x
-
10
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Humidity range (with temperaturefrom +5 to +95C)
RH accuracy (no less than +/-0,25Con psychometric difference)
Dew point range for continuoustests (C)
Dew point range for discontinuoustests (C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internaltemperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE ES SERIE MOD. CH250 C ES CH340 C ES CH600 C ES CH1200 C ES CH1600 C ES CH2000 C ES
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing, only special production.
(3) In case of special power supply please see enclosed manual.
224
-75 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
27
8,5
15,0
2000(-55C)
R404 A/R23
850x1460x1516(h1 = 47)
600x535x700
50
670
630
529
65
(2)
x
557
-75 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
29
9,5
15,8
3500(-55C)
R404 A/R23
1100x1705x1911(h1 =58)
850x733x895
50
990
940
501
68
(2)
x
1152
-75 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
43
13
23,8
4500(-55C)
R404 A/R23
1250x2160x2036(h1 =58)
1000x1130x1020
50
1300
1230
455
70
(2)
x
1535
-75 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
43
13
23,8
4000(-55C)
R404 A/R23
1250x2534x2040(h1 =70)
1000x1505x1020
50
1570
1500
481
70
(2)
x
2040
-75 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
-
-
-
-
R404 A/R23
1250x3035x2040(h1 =70)
1000x2000x1020
50
-
-
-
60
(2)
x
336
-75 +180
0,5 1
10 98%
1% 3%
+2+94 C
-20+2C
400 +6/-10%50Hz 3+N+G
27
8,5
15,0
1500(-55C)
R404 A/R23
850x1725x1516(h1 = 47)
600x800x700
50
740
690
470
65
(2)
x
-
11
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Humidity range (with temperaturefrom +5 to +95C)
RH accuracy (no less than +/-0,25Con psychometric difference)
Dew point range for continuoustests (C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internal temperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE SERIE MOD. E CH250 E CH340 E CH600 E CH1200 E CH1600 E CH2000 E
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing
(3) In case of special power supply please see enclosed manual.
224
-20 +180
0,25 0,3
10 95%
1% 3%
+2 +84 C
230 +6/-10%50Hz 1+G
6,5
2
3,4
500 (0 C)
R404 A
850x1460x1516(h1 = 47)
600x535x700
50
500
460
371
59
x
(2)
557
-20 +180
0,25 0,3
10 95%
1% 3%
+2 +84 C
230 +6/-10%50Hz 1+G
6,5
2
3,4
500 (0 C)
R404 A
1100x1705 x1911(h1 = 58)
850x733 x895
50
770
720
384
59
x
(2)
1152
-10 +150
0,25 0,3
10 95%
1% 3%
+2 +84 C
230 +6/-10%50Hz 1+G
7,2
2,2
4
500 (0 C)
R404 A
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1030
960
356
59
x
(2)
1535
-10 +150
0,25 0,3
10 95%
1% 3%
+2 +84 C
230 +6/-10%50Hz 1+G
7,2
2,2
4
500 (0 C)
R404 A
1250x2534 x2040(h1 = 70)
1000x1505x1020
50
1070
1000
315
59
x
(2)
2040
-10 +150
0,25 0,3
10 95%
1% 3%
+2 +84 C
230 +6/-10%50Hz 1+G
7,2
2,2
4
500 (0 C)
R404 A
1250x3035x2040(h1 = 70)
1000x2000x1020
50
1170
1100
290
59
x
(2)
336
-20 +180
0,25 0,3
10 95%
1% 3%
+2 +84 C
230 +6/-10%50Hz 1+G
6,5
2
3,4
500 (0 C)
R404 A
850x1725x1516(h1 = 47)
600x800x700
50
560
520
379
59
x
(2)
-
12
3.2 TECHNICAL DATA FOR THERMOSTATIC CHAMBERS
The thermostatic chambers carry out tests only by controlling temperature
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing
(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internal temperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE SERIE MOD. CH250 T CH340 T CH600 T CH1200 T CH1600 T CH2000 T224
-40 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
10
3,0
5,5
400 (-25 C)
R404 A
850x1460 x1516(h1 = 47)
600x535x700
50
540
490
395
59
x
(2)
557
-40 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
16
4,7
8,9
1000 (-25 C)
R404 A
1100x1705x1911(h1 = 58)
850x733x895
50
800
750
400
64
x
(2)
1152
-40 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
21
6,1
11,5
1300 (-25 C)
R404 A
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1060
990
367
65
x
(2)
1535
-40 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
21
6,1
11,5
1300 (-25 C)
R404 A
1250x2534x2040(h1 = 70)
1000x1505x1020
50
1370
1300
410
65
x
(2)
2040
-40 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
21
6,1
11,5
500 (-25 C)
R404 A
1250x3035x2040(h1 = 70)
1000x2000x1020
50
1470
1400
369
65
x
(2)
336
-40 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
10
3,0
5,5
400 (-25 C)
R404 A
850x1725 x1516(h1 = 47)
600x800x700
50
600
550
376
59
x
(2)
-
13
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing
(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internal temperature load(W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH)(mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE SERIE MOD. CH250 TC CH340 TC CH600 TC CH1200 TC CH1600 TC CH2000 TC224
-75 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
12,5
4,0
6,8
600 (-55 C)
R404 A/R23
850x1460x1516(h1 = 47)
600x535x700
50
580
540
435
63
x
(2)
557
-75 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
21,5
6,8
11,9
1200 (-55 C)
R404 A/R23
1100x1705x1911(h1 = 58)
850x733x895
50
880
830
445
66
x
(2)
1152
-75 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
27
8,5
15,0
1500 (-55 C)
R404 A/R23
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1160
1090
405
68
x
(2)
1535
-75 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
27
8,5
15,0
1500 (-55 C)
R404 A/R23
1250x2534x2040(h1 = 70)
1000x1505x1020
50
1470
1400
441
68
x
(2)
2040
-75 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
27
8,5
15,0
550 (-55 C)
R404 A/R23
1250x3035x2040(h1 = 70)
1000x2000x1020
50
1570
1500
395
68
x
(2)
336
-75 +180
0,25 0,3
400 +6/-10%50Hz 3+N+G
12,5
4,0
6,8
500 (-55 C)
R404 A/R23
850x1725 x1516(h1 = 47)
600x800x700
50
650
600
409
63
x
(2)
-
14
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing, only special production.
(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internal temperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE ES SERIE MOD. CH250T ES CH340T ES CH600T ES CH1200T ES CH1600T ES CH2000T ES
224
-40 +180
0,5 1
400 +6/-10%50Hz 3+N+G
18
5,5
9,8
1600(-25C)
R404 A
850x1460x1516(h1 = 47)
600x535x700
50
590
550
443
60
(2)
x
557
-40 +180
0,5 1
400 +6/-10%50Hz 3+N+G
20
6
10,8
2500(-25C)
R404 A
1100x1705x1911(h1 = 58)
850x733x895
50
870
820
465
66
(2)
x
1152
-40 +180
0,5 1
400 +6/-10%50Hz 3+N+G
28,5
8,1
15,7
3500(-25C)
R404 A
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1140
1070
396
67
(2)
x
1535
-40 +180
0,5 1
400 +6/-10%50Hz 3+N+G
28,5
8,1
15,7
2600(-25C)
R404 A
1250x2534x2040(h1 = 70)
1000x1505x1020
50
1470
1400
440
67
(2)
x
2040
-40 +180
0,5 1
400 +6/-10%50Hz 3+N+G
-
-
-
-
R404 A
1250x3035x2040(h1 = 70)
1000x2000x1020
50
-
-
-
-
(2)
x
336
-40 +180
0,5 1
400 +6/-10%50Hz 3+N+G
18
5,5
9,8
1300(-25C)
R404 A
850x1725x1516(h1 = 47)
600x800x700
50
660
610
416
60
(2)
x
-
15
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing, only special production.
(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internal temperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE ES SERIE MOD. CH250TC ES CH340TC ES CH600TC ES CH1200TC ES CH1600TC ES CH2000TC ES
224
-70 +180
0,5 1
400 +6/-10%50Hz 3+N+G
23
7
12,8
2000(-55C)
R404 A/R23
850x1460x1516(h1 = 47)
600x535x700
50
670
630
529
65
(2)
x
557
-70 +180
0,5 1
400 +6/-10%50Hz 3+N+G
25
7,8
13,6
3500(-55C)
R404 A/R23
1100x1705x1911(h1 = 58)
850x733x895
50
990
940
501
68
(2)
x
1152
-70 +180
0,5 1
400 +6/-10%50Hz 3+N+G
39
12,3
21,6
4500(-55C)
R404 A/R23
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1300
1230
455
70
(2)
x
1535
-70 +180
0,5 1
400 +6/-10%50Hz 3+N+G
39
12,3
21,6
4000(-55C)
R404 A/R23
1250x2534x2040(h1 = 70)
1000x1515x1020
50
1570
1500
481
70
(2)
x
2040
-70 +180
0,5 1
400 +6/-10%50Hz 3+N+G
-
-
-
-
R404 A/R23
1250x3035x2040(h1 = 70)
1000x2000x1020
50
-
-
-
-
(2)
x
336
-70 +180
0,5 1
400 +6/-10%50Hz 3+N+G
23
7
12,8
1500(-55C)
R404 A/R23
850x1725x1516(h1 = 47)
600x800x700
50
740
690
470
65
(2)
x
-
16
3.3 PERFORMANCE -gradients
Maximum temperature variationspeed from -40C to +180C (C/min)
Maximum temperature variationspeed from +180C to -40C (C/min)
Climatic chambers model
3,9
2,5
3,2
2,5
3
2,5
2,3
2
Temperature variation speed data are to be considered as mean values,measured at an ambient temperature of 20...22C, without internal loads.
2
1,5
CH250
CH250 T
CH340
CH340 T
CH600
CH600T
CH1200
CH1200 T
CH1600
CH1600T
CH2000
CH2000 T
3,9
1,5
Maximum temperature variationspeed from -70C to +180C (C/min)
Maximum temperature variationspeed from +180C to -70C (C/min)
3,7
2
3,7
2
3
2
2,3
1,5
2
1
CH250 C
CH250 TC
CH340 C
CH340 TC
CH600 C
CH600 TC
CH1200 C
CH1200 TC
CH1600 C
CH1600TC
CH2000 C
CH2000 TC
3,6
1,9
Thermostatic chambers mod.
Climatic chambers model
Thermostatic chambers mod.
(1) Standard packaging is made of cardboard or plastic, suitable for transport by road or air freight.For sea freight please contact the manufacturer or his agent to request all the relevant information.
(2) Under request when purchasing(3) In case of special power supply please see enclosed manual.
Useful volume (l)
Temperature range (C)
Accuracy ( C)
Supply voltage (3) (V)
Max electrical absorption (3) (A)
Rated output (3) (kW)
Max. used power (3) (kW)
Maximum internal temperature load (W)
Cooling gas
External dimensions (LxDxH) withoutwheels (with wheels H tot = H+ h1 ) (mm)
Useful internal dimensions (LxDxH) (mm)
Maximum weight to be loaded oneach internal shelf (kg)
Overall weight with standardpackaging (1) (kg)
Overall weight without packaging (kg)
Floor load (kg/m2)
Noise level with air condenser (dB A)
Air condenser
Water condenser
CHALLENGE SERIE MOD. E CH250 TE CH340 TE CH600 TE CH1200 TE CH1600 TE CH2000 TE224
-20 +180
0,25 0,3
230 +6/-10%50Hz 1+G
4,5
1,6
2,4
500 (0 C)
R404 A
850x1460 x1516(h1 = 47)
600x535 x700
50
510
460
469
59
x
(2)
557
-20 +180
0,25 0,3
230 +6/-10%50Hz 1+G
4,5
1,6
2,4
500 (0 C)
R404 A
1100x1705 x1911(h1 = 58)
850x733 x895
50
800
720
400
59
x
(2)
1152
-10 +150
0,25 0,3
230 +6/-10%50Hz 1+G
6
2
3
500 (0 C)
R404 A
1250x2160x2036(h1 = 58)
1000x1130x1020
50
1020
950
351
59
x
(2)
1535
-10 +150
0,25 0,3
230 +6/-10%50Hz 1+G
6
2
3
500 (0 C)
R404 A
1250x2534 x2040(h1 = 70)
1000x1505x1020
50
1220
1000
362
59
x
(2)
2040
-10 +150
0,25 0,3
230 +6/-10%50Hz 1+G
-
-
-
500 (0 C)
R404 A
1250x3035x2040(h1 = 70)
1000x2000x1020
50
-
-
-
-
x
(2)
336
-20 +180
0,25 0,3
230 +6/-10%50Hz 1+G
4,5
1,6
2,4
500 (0 C)
R404 A
850x1725 x1516(h1 = 47)
600x800x700
50
560
520
355
59
x
(2)
-
17
Maximum temperature variationspeed from 0C to +100C (C/min)
Maximum temperature variationspeed from +100C to 0C (C/min)
1,4
1,3
1,7
1,7
1
1
0,8
0,5
Climatic chambers model
Thermostatic chambers mod.
CH250 E
CH250 TE
CH340 E
CH340 TE
CH600 E
CH600 TE
CH1200 E
CH1200 TE
CH1600 E
CH1600 TE
CH2000 E
CH2000 TE -
-
0,7
0,3
Maximum temperature variationspeed from -25C to +85C (C/min)
Maximum temperature variationspeed from +85C to -25C (C/min)
Maximum temperature variationspeed from -40C to +180C (C/min)
Maximum temperature variationspeed from +180C to -40C (C/min)
Climatic chambers model
Thermostatic chambers mod.CH250 ES
CH250 T ES
CH340 ES
CH340 T ES
CH600 ES
CH600 T ES
CH1200 ES
CH1200 T ES
CH1600 ES
CH1600 T ES
CH2000 ES
CH2000 T ES
Maximum temperature variationspeed from -55C to +85C (C/min)
Maximum temperature variationspeed from +85C to -55C (C/min)
Maximum temperature variationspeed from -70C to +180C (C/min)
Maximum temperature variationspeed from +180C to -70C (C/min)
Climatic chambers model
Thermostatic chambers mod.
CH250 C ES
CH250 TC ES
CH340 C ES
CH340 TC ES
CH600 C ES
CH600 TC ES
CH1200 C ES
CH1200 TC ES
CH1600 C ES
CH1600 TC ES
CH2000 C ES
CH2000 TC ES
Temperature variation speed data are to be considered as mean values,measured at an ambient temperature of 20...22C, without internal loads.
3.4 ENVIRONMENTAL CONDITIONS
CH
0305
-320
In order for it to operatecorrectly, the chambermust be positioned as fol-lows:
far from heat sources; far from direct sunlight; far from air condition-
ing systems; in a dust-free ambient.
Ambient temperature min: + 10Cnominal: + 20C*max: + 30C
Relative humidity UR max: 80%
*All performance are guaranted at this tem-perature.
20C 40C
CH
0305
-330
9,0
5,5
8,0
3,0
9,5
5,7
8,7
3,6
5,5
3,8
4,8
2,7
6,1
4,0
5,0
2,8
-
-
-
-
5,0
3,5
4,0
2,2
10
5,5
8
3
11,0
6,0
10,0
3,8
6,5
5,5
4,6
4,0
5,5
5,5
5,0
3,2
-
-
-
-
5,0
3,5
4,0
2,2
3.1
-
18
3.5 FUSES
CH250 T CH250
CH340 T CH340
CH600 T CH600
CH1200 T CH1200
CH1600 T CH1600
CH2000 T CH2000
CH250 TC CH250 C
CH340 TC CH340 C
CH600 TC CH600 C
CH1200 TC CH1200 C
CH1600 TC CH1600 C
CH2000 TC CH2000 C
CH250 TE CH250 E
CH340 TE CH340 E
CH600 TE CH600 E
CH1200 TE CH1200 E
CH1600 TE CH1600 E
CH2000 TE CH2000 E
CH250 T ES CH250 ES
CH340 T ES CH340 ES
CH600 T ES CH600 ES
CH1200 T ES CH1200 ES
CH1600 T ES CH1600 ES
CH2000 T ES CH2000 ES
CH250 TC ES CH250 C ES
CH340 TC ES CH340 C ES
CH600 TC ES CH600 C ES
CH1200 TC ES CH1200 C ES
CH1600 TC ES CH1600 C ES
CH2000 TC ES CH2000 C ES
Electrical initials
25 A/CH10 10,3x38
25 A/CH10 10,3x38
25 A/CH10 10,3x38
25 A/CH10 10,3x38
25 A/CH10 10,3x38
32 A/CH10 10,3x38
25 A/CH10 10,3x38
25 A/CH10 10,3x38
25 A/CH10 10,3x38
50 A/14x51
50 A/14x51
50 A/14x51
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
25 A/CH10 10,3x38
32 A/CH10 10,3x38
50 A/14x51
50 A/14x51
50 A/14x51
-
32 A/CH10 10,3x38
32 A/CH10 10,3x38
50 A/14x51
63 A/14x51
63 A/14x51
-
1F3 1F6 1F10 6F2 8F8Value/code (3)Model
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
3 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
16 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
-
-
-
-
-
-
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
6 A/CH10 10,3x38
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
240 C
(3) In case of special power supply please see enclosed manual.
-
19
HOW TO RAISE AND MOVE WITH A BRIDGE CRANEAccessories: textile fibre belts and PVC angle bars.Weight: see technical specifications
4.1 PERSONNEL REQUISITESPersonnel in charge of handling the machine need no special requisites (justremember the type of packaging).However, we suggest that this is done by someone who is accustomed to usingmachines for lifting and transport operations.
4.2 MACHINE CONDITIONSThe machine is normally supplied packed and on a pallet. If the machine isdelivered by our staff, it may be without packaging. Other types of packaging maybe supplied according to the destination and/or customers needs.
4.3 EQUIPMENT NEEDED FOR HANDLINGThe machine can be raised and moved by a lift truck, bridge crane, crane or othersuitable means with an adequate capacity.
Make sure that the forks do not hit the machine frame.
If it is hit accidentally, check immediately for any damageand if necessary, contact the manufacturer.
DS1
710-
010
DS1
710-
050
DS1
710-
060
Check that the forks are level andthe load is stable before movingthe machine.
In order to handle the machine, the fol-lowing rules should be observed: Move the machine slowly Do not tilt the machine, always keep it in
an upright position Always make sure you can control the
machine during handling
Warning: Do not turn the machine upside-down Do not drag the machine Do not shake the machine
How to store the machineIt should be kept in a dry environment withan ambient temperature ranging from 0 40 C.
Do not use place the machine in a sling of metal cables or chains as these could damage it.Never put a sling around a machine without its pallet.In order to prevent the oil in the compressor from flowing into the refrigerating circuit, only transport,stock and handle the equipment in an upright position according to the instructions on the packaging.If the machine is placed on its side, leave it in an upright position for at least 24 hours before switchingon.
Do not place packaged machines one on top of the other and always keepthem in an upright position as indicated by the special arrows marked onthe packaging itself.
4 HANDLING AND REMOVAL OF PACKAGING
40 C
0C
4.1
4.2 4.3
-
20
DS1
710-
010
DS1
710-
040
DS1
710-
030
4.1.1 How to remove the outer straps 4.1.2 How to remove the cardboard casing
4.1.3 How to remove the internal straps 4.1.4 How to remove the wooden side blocks
DS1
710-
040
All the packaging materials can be recycled and can be disposed of according to the regulations in force.Take care to eliminate the packaging so that it does not become a danger and throw away the plastic bags,as they could cause children to suffocate.
Use a special lever to remove the two woodenblocks.
Take care not to scratch the surface of themachine.
DS1
710-
070
4.1.5 How to remove the pallet
Just raise the machine a few centimetres so thatthe pallet can be pulled out from underneath.
The machine can be placed directly on the floor.
4.4 HOW TO REMOVE THE PACKAGING
Do not bang or scratch the machine.
4.4 4.5
4.6 4.7
4.8
-
21
5 DESCRIPTION OF THE SYSTEM
CH0305-F03
5.1
14
15
2
4
5
16
6
14
15 1117
16
CH0305-F04
18
8
5.1 GENERAL VIEW
5.2
The inner chamber is made of stainless steel (AISI 304)and is welded to make it steamproof.
The external structure and the base of the chamber aremade of epoxy-painted steel.
The chamber is insulated with special CFC-free polym-erized polyurethane foam with a density of 40 kg/cu.m.
The door has a heated inspection hatch; the inner surface ismade of stainless steel, the external surface is made ofshockproof plastic.
The chamber is lit by an incandescent lamp on the ceiling.Each chamber is equipped with an 80 mm port hole 6.
18.1
19
-
22
CH0305-F35a
5.31 Supply cable2 Inspection window (optional)3 U.V. lamp socket (optional)4 Control panel5 Interface panel5.1 Alarm signal electronic thermostat (fig.
8.3) (stops the equipment when the tempera-
ture exceeds the preset limits)5.2 DIGITAL IN/OUT connector (fig. 6.10) connection of auxiliary contact digital
input/output signals (enables custom-ers own operations)
5.3 ANALOGIC IN/OUT connector (fig. 6.11) connection for analogic inputs (connection for users auxiliary probes)5.4 RS 232/485 IN connector (fig. 6.12)
RS 232 serial (RS 485 on request)5.5 RS 232/485 OUT connector (fig. 6.13)
RS 232 serial (RS 485 on request)5.6 Main switch (isolator switch)6 Port hole7 Demineralized water tank with inlet pipe8 Internal shelf9 Condensate drain10 Humidification water inlet11 Test room12-13 Condensation water pipes14 Chamber door15 Handle with lock16 Lower hatch door17 Internal air recycling fan18 Probes18.1 Capacitive probe: only available on
customer-built machines (*)
19 Internal lamp20 10A Socket specimen power supply
(optional)
CH0305-F07 CH0305-F06
910
13129
10
Machines with air condenser Machines with water condenser
CH0305-F38
5.1
5.2
5.4
CH0305-F10
5.3
5.5
1
35,6
5
6
7
14
15
16
5.4 5.5
(*
) N.B.: If this probe is present, it will replace the wet bulb probe and therefore the psychrometric system and gauze no
longer exist. Therefore the following instructions for the latter system can be ignored.
20
-
23
5.2 CONTROL SYSTEM
The control system is equipped with a powerful microprocessor and the basic design consits of an internal PLCconnected to the operator panel; this is a very flexible system which will be able to take any software released in future.
The graphic interface is supported by a operator panel with an LCD display and illuminated push-buttons. The PLCcompletely controls the chamber by means of an analogic-digital interface.
The CHALLENGE chambers are completely run by the operator panel and/or WINKRATOS software manufacturedspecially by Angelantoni S.p.A.
If WINKRATOS software is used, the chamber is then controlled by an external PC with a serial connection (both theWINKRATOS software and the PC can be purchased as accessories for the chamber).
Both the operator panel and the WINKRATOS control the chamber alarm and safety signals in order to ensure a reallyreliable system. They also enable complex test cycles to be programmed and memorized on a disk. Auxiliary operationscan also be run, the command to open and close the auxiliary contacts can be inserted in the programming of the heatand climatic cycles in order to be able to synchronize the switching on and off of external equipment at precise pointsin the programmed cycles.
The WINKRATOS software enables external signals coming, for example, from measurement apparatus to be acquiredthrough ten analogic inputs; these signals are converted to digital signals and are inserted inside data log files so theycan be memorized and visualized and printed in graphs.The (optional) printer works either alphanumerically or graphically (as a data logger or as a traditional recorder) and providesa paper copy of the programmes or data log files.
PCData memory programmesfor user interface
Adjustment of alarm systemlogic state
Operator panel with LCD display PLC micro
Sensors Power board
Floppy disk
mouseRS232/485
To the remote RS 232/485
5.6
-
24
CH0305-F05
5.7
1 23
4
CONTROL PANEL
1 START-STOP switchSwitch used to switch off (by means of a servomechanism) the mains supply to the equipment (380V); the controlsystem remains switched on.
2 Alarm signalThis indicates an alarm condition in the equipment; in this condition the equipment is switched OFF (at the same timethe type of alarm is shown on the LCD display).
3 Internal light switchThis is used to switch the internal light on and off.
4 Operator panel with LCD displayThe operator panel with liquid crystal display is used to programme and visualize all the functions and variables whichoperate the equipment.A detailed description of how to use the operator panel is given in the attached instruction handbook for the operatorpanel.
5.3 COOLING SYSTEMThe cooling system has been optimized to give maximum thermodynamical efficiency and an accurate temperaturecontrol.The system is loaded with ozone harmless fluids: R404A and R23.Cooling is obtained by the evaporation of the liquid injected into the evaporator.The compressor compresses the (cooling) gas into the condenser and under the effect of the high pressure and coolingthe gas changes state and becomes liquid.The liquid expands thanks to a thermostatic valve and as it evaporates, it absorbs heat and induces cooling at the sametime.The cycle is completed when the gas is sucked in once again by the compressor.
5.4 DEHUMIDIFCATION SYSTEMNB: the dehumidification system is installed: on climatic machines on thermostatic machines equipped with (optional) rise dehumidificationDehumidification is obtained by COLD FINGER technology.A small, smooth pipe evaporator captures humidity in the air by freezing it without varying the temperature inside thechamber.The evaporator is fed by the cooling system itself.The ice which accumulates on the coil will then melt and the resulting condensate is eliminated through the specialdrainage system.When the machine is testing dirty components, it is advisable not to switch on the recirculation system in order to avoidthe concentration of impurities (see paragr. 6.2.1 Condensate drain and paragr. 11 How to clean the demineralizedwater recirculation system).
-
25
5.5 HUMIDIFICATION SYSTEMNB: only for machines equipped with this device
5.8 PROBES
2 Dry bulb probe3 Wet bulb probe
(only climatic chambers) This probe is equipped with gauze the end of which remains constantly immersed in demineralized water
Both probes measure the temperature. Relative humidity is measured by the
psychometric system. For further information please refer to the
chapter entitled MAINTENANCE
5.7 INTERNAL LIGHT
The internal light 19 is lit by pushing button 3 (fig. 8) on thecontrol panel.
5.8
5.9
CH0305-F08
CH0305-F09
5.6 HEATING SYSTEMHeating is obtained by means of low thermal inertia, stainless steel, electric immersion heaters placed on the internalair recirculation circuit.
Humidification is obtained by directly introducing steaminto the chamber.Water can be used from the mains supply; in fact, themachine has its own water- softening system incorpo-rated.
The direct humidification system uses a special steamgenerator which introduces steam from heated water,without the risk of dripping inside the chamber.
This direct system has an extremely low response timewhich enables humidity to be varied very quickly.
This is all controlled by a regulator which considers that thepercentage of water contained in the air is a non-lineartemperature function.
Measurement of relative humidity is based on a psycho-metric system (dry bulb, wet bulb).The computer notes the dry bulb and wet bulb temperaturevalues and calculates the relative humidity and otherparameters necessary for adjustment.
A water storage tank is included in the humidificationsystem in the CHALLENGE chambers in order to give ahigh level of autonomy during climatic tests even when thechamber is not connected to the mains supply.
lamp 19
2
3
-
26
CH0305-040
500
800
Angelantoni
MOUSE
STAR
T/STO
P
LIGHT
Industrie
ALAR
MS
division
environmental
chambers
6 INSTALLATION
6.16.1 POSITIONING OF THEMACHINE
In order to bring the machine to the instal-lation site, refer to chapter 4.
During installation remember to leaveenough space for work and maintenanceoperations (fig. 6.1).
Check that the floor is perfectly flat.
Check the ambient conditions of the in-stallation site (see paragr. 3.4 ENVIRON-MENTAL CONDITIONS).
WARNING: (only for chambers with humidity control)The machine cannot operate in ambient temperatures below 0C; at thistemperature the demineralized water for humidification and for thepsychometric tank would freeze.
If the machine is left unused in an ambient where the temperature fallsbelow 0C, it is advisable to empty the demineralized water tank.
WARNING:The machine has not been designed to operate in areas classed asdangerous (explosive), provided for in the CEI (EIC) norm 64/4.The machine cannot operate in an explosive or corrosive ambient.The machine is not suitable for working outside or in places that arenot protected from the weather.
If the user wishes to place the machine on a site that is different from those described above, please contactthe manufacturer (Angelantoni S.p.A.) before using the machine.
-
27
6.2 PLUMBINGPersonnel requisites: specialized plumber.
The machines equipped with a humidity control use asystem to introduce steam directly into the chamber.In order to measure internal humidity, a psychometricsystem (dry bulb - wet bulb) is used and the wet bulb ishumidified with demineralized water.As this equipment has an incorporated demineralizer,water can be taken for the above-mentioned uses in twodifferent ways:A) directly from the mains supply. Prepare a mains water line which has the technical
characteristics given in the table below.B) By pouring demineralized water into the special
container: No special preparation is necessary.
Technical data for the preparation of the mainswater line for humidification
Pressurebar
(1bar: Pa x 105)min max
0,8 1,2
Connection diameter
1/2 G
Maximum consumption
kg/h
0,8
If the customer has a demineralized water line, he canconnect it to the machine instead of using the mainssupply.
CH0305-F38
6.3
Connect the mains water supply to pipe union 10. For data concerning pressure, consumption and dimen-
sions, please refer to the table.
6.2.1 Condensate drain
CH0305-220
6.2
Connect pipe union 9 to the drain line (fig. 6.2);diameter 3/4"G (models 250 - 340), 1"G (models600-1200-1600).The end can be connected to a preset drain orelse the water can be drained directly into acollecting tray or container, without making anydrain-traps along the line.
CH0305-094
The drain is a free-fall drain and is not under pressure.The machine is equipped with a system which enablescondensate water to be re-used (if it is clean), so that theuser can choose whether to programme condensate drain-age to the outside or into the collecting container.
Use a pipe equal or larger in diameter to the machine pipeunion.
The connecting pipe will not only enable the condensatewater to flow out but it will also balance pressures inside thetest chamber in the case of unexpected temperaturevariations, so no drain-trap should be prepared.
6.2.2 Mains water or demineralized water supply for humidification(only for machines equipped with this device)
CH0305-230 CH0305-240
9
CH0305-F07
9
CH0305-F07
10
-
28
6.2.3 Water supply for condenser(only for machines equipped with this device)This description does not concern machines with an air condenser.
If the chamber is equipped with a water condenser, adequate plumbing must be prepared with the characteristics describedin the table below.
TOWER WATER WELL WATER
Pressurebar
(1bar: Pa x 105)min max
3 6
TemperatureC
min max
25 30
Pressurebar
(1bar: Pa x 105)min max
3 6
TemperatureC
min max
10 18
Connections diameter
inlet/outlet
1/2G
Regularly check the hydraulic connections and pay special attention to the hose pipes.
The connection pipes between the water plug and the chamber must behose pipes in order to allow partial movement of the chamber itself duringmaintenance.Installation is advisable for regular checks of: thermometer, pressuregauge with pressure reducer and manual on/off valves.
Pour the demineralized water directlyinto storage tank 3 (fig. 6.4).
open the lower hatch door unscrew the cap use a funnel to pour the water intothe connection pipe; the water levelcan be controlled through the trans-parent container.
Characteristics of demineralized wa-ter:- maximum conductivity 10 S/cm.
Daily consumption:-10 kg/24h maximum
6.4
The system is equipped with a sensor to control the water level: if this level should fall below the set limit, a warningmessage will appear on the display.
6.5
1312
12 CONDENSER WATER INLET13 CONDENSER WATER OUTLET
CH0305-F06
6.6
3
CH0305-F14CH0305-F13
CH0305-F38
-
29
6.3 ELECTRICAL WIRINGPersonnel requisites: specialized electrician
The equipment must have a mains voltage value as described in the chapter entitled Technical specifications (seechap. 3).
6.3.1 Characteristics of the plugThe plug must have the following specifications: three phase machines
- a 3P + N + E, IP 44, 380-415 V industrial plug, suitable for the absorbed current (see Technical data) in compliancewith the norm EN 6030-1-2.
single phase machines- a P + N + T, IP 44, 230 V industrial plug, suitable for the absorbed current (see Technical data) in compliance with
the norm EN 6030-1-2.
6.3.2 Socket BoardUse a Socket Board with the following technical specifications:Industrial socket with a 3P + N + E, 380-415 V, IP 44 cut-off switch with fuse carrier and fuses, all suitable for theabsorbed current (see Technical data) in compliance with the norm EN 6030-1-2.
6.3.3 General specifications for the electrical systemThe socket board must be connected above the machine to a system equipped with a differential switch and with earthsystems coordinated according to:
IEC 364-4 art. 413.1, that is to say:Vc= Rt*Is
-
30
6.3.5 Earth connectionThe yellow-green wire of the supply cable fastened tightly into the plug will provide the equipment with adequateprotection.
6.3.6 Preferential supply for the internal computerIn order to supply the computer inside the equipment with a preferential line coming from your uninterrutible powersupply unit (UPS) , use the terminals prepared inside the electrical board (see attached electrical wiring diagram).To install your UPS disconnect the jumps placed on these terminals that allow the operating without UPS. Wiring mustbe carried out by an authorized technical assistance service. If the chamber is supplied with UPS already installed dontfollow that has just been previously written.
Position of and connection to lamp socket forradiation and UV radiations.6.3.7 Lamp connection for radiation and UV radia-
tions(For machines equipped with this accessory)
The UV lamp is installed at the factory and the machine is,therefore, supplied with this device, the relevant connec-tion socket and the lamp that must be assembled ( seeparagraph 9.3).
5.1 Alarm signal electronicthermostat (fig. 8.3)(stops the equipmentwhen the temperatureexceeds the preset lim-its)
5.2 DIGITAL IN/OUT con-nector (fig. 6.10)connection of auxiliarycontacts digital and in-put/output signals (ena-bles customers own op-erations)
5.3 ANALOGIC IN/OUT con-nector (fig. 6.11)Connection for analog-ic inputs (connection forusers auxiliary probes)
5.4 RS 232/485 IN connec-tor (fig. 6.12)RS 232 serial (RS 485on request)
5.5 RS 232/485 OUT con-nector (fig. 6.13)RS 232 serial (RS 485 onrequest)
5.6 Main switch (isolatorswitch)
1 2
CH0305-F44
6.7
6.3.8 Interface and serial port connection
CH0305-F10
5.1
5.2
5.4
5.3
5.5
5.66.8
6.3.9 Specimen power supply connection(For machines equipped with this accessory)
CH0305-F50
CH
0305
-F49
The specimen can befed from a 220V/10A
socket.
6.9
2
1
1 Socket2 Feed-through hole
Insulate the feed-through hole 2 correctly.
This accessory is equipped with a temperature-rise pro-tection system using the thermostat 5.1 (fig. 6.8) which, ifset correctly (see paragraph entitled Hardware alarms),will switch off the power supply to the specimen. In orderto turn on the power supply to the specimen, switch on themachine again.
1 UV lamp2 UV lamp supply socket
-
31
CH0305-134
6.11ANALOGIC IN/OUT Connector (5.3)
IA 1IA 2IA 3IA 4IA 5IA 6
134679
225588
ANALOGIC INPUT PIN (+) PIN (-)
PT 1PT 2PT 3PT 4
10131619
PT100 PROBE INPUT PIN ONLY
11141720
PIN B
12151821
PIN A
If the user has put his own sensors inside the test chamberwhich produce analogic signals (0-10 V or 0-20 mA), thesemay be acquired by the built-in computer and visualizedand/or memorized.The type of configuration for each channel is set at thefactory on special jumpers on the PLC board.The description of the connector pins follows below:
This connector is used to connect to the control system: probes PT 100 (RTD) to be placed inside the
chamber, to be connected to terminals PT1, PT2,PT3, PT4.
Proportional signals to be connected to inputs IA1,IA2, IA3, IA4, IA5, IA6.
CH0305-132
6.10DIGITAL IN/OUT connector (5.2)
A- Clean contact NO (AUX 1 output)
B- Clean contact NO (AUX 2 output)
C- Clean contact NO (AUX 3 output)
D- Clean contact NO (AUX 4 output)
E- Clean contact NO (users equipment)
F- Clean contact NO for remote control alarm
1 - 2
3 - 4
5 - 6
7 - 8
22 - 23
24 - 25
OUTPUT DESCRIPTION PINABCD
EF
123456789
10111213
141516171819202122232425
123456789
10111213
141516171819202122232425
These configurations on the connectorswill be activated on request.
These configurations on the connectorswill be activated on request.
(IA2) 4-20mA/0-10V(IA1) 4-20mA/0-10V
(IA3) 4-20mA/0-10V(IA4) 4-20mA/0-10V
(IA5) 4-20mA/0-10V(IA6) 4-20mA/0-10V
+-
-
-
+
+
+
+
+
RTD
RTD
RTD
RTD
PT1
PT2
PT3
PT4
-
32
12
34
56
78
9
12
34
56
78
9
CH0305-260
6.12
5.4RS232 configuration
RS2
32/4
85 IN
RS2
32/4
85 O
UT
12
34
56
78
9
rem
ote
con
trol
(PC)
CH0305-282
RS 232/485 IN connector (5.4) (fig. 6.12)Serial interfaceThis connector is usually used for the remote control of thechamber by means of a PC with WINKRATOS softwareby Angelantoni S.p.A.
RS 232/485 OUT connector (5.5) (fig. 6.13)This connector is used only with the RS485 configurationto connect several machines to each other and to use asingle remote control with one PC (fig. 6.16).
12
34
56
78
9
12
34
56
78
9
12
34
56
78
9
12
34
56
78
9
12
34
56
78
9
CH0305-272
6.14
5.4 5.4 5.4
12
34
56
78
9
12
34
56
78
9
12
34
56
78
9
12
34
56
78
9
6.16
Only withRS485
configuration
PC
WINKRATOS SYSTEMSTANDARD CONFIGURATION
The WINKRATOS system is able to operate several ma-chines at the same time.
Each RS232 computer serial port (PC) is connected to eachRS232 connector (paragr. 5.4 fig. 6.14).
As shown in the fig. 6.16 the connector can also be used in thestandard RS 485 for a MULTIDROP connection of severalmachines on-line.
IN THIS CASE THE CONFIGURATION OF THEMACHINES INTERNAL MICROCONTROLLER MUST
BE SET UP BY THE MANUFACTURER.
The RS 485 standard can also be used withspecial software that could also be realized by
the user.The WINKRATOS system does not operate this
standard.
12
34
56
78
9
12
34
56
78
9
CH0305-260
6.13
5.5RS485 configuration
RS2
32/4
85 IN
RS2
32/4
85 O
UT
rem
ote
con
tro
(PC)
CH0305-283
CH0305-270
5.4 5.55.45.5PC
CH0305-273
PC WITH USERSSOFTWARE
RS232
M
6.15
I f the user needs to manage the chamber in his own way, he can project his own dedicated software and connecta computer to the connector 5.4 (fig. 6.16). To cope with this need it is necessary to expressly require to themanufacturer the documentation relative to the communications protocol.The communication protocol allows to know the data exchanging mode between the users software and themachine M (fig. 6.15).
CONNECTION WITH THE USERS SOFTWARE
PC WITHWINKRATOS
5.4
MULTIDROP SYSTEM- THE WINKRATOS SYSTEMDOES NOT OPERATE THIS STANDARD
12
34
56
78
9
TX
RX
TX-/RX-
TX+/RX+
-
33
7.1 AIM OF THE MACHINEThe machine has been designed to carry out temperature and humidity tests on components and electrical equipment.The machine is also suitable for temperature and humidity tests on industrial and pharmaceutical products (CHAL-LENGE -E series).Before placing any object whatsoever inside the chamber, make sure that the object itself will not be damaged by thetest temperature.For further information, please refer to chapter 3 entitled Technical specifications.
7.2 MACHINE END-USEThe machine has been designed to be used in companies and must only treat the objects mentioned in paragraph 7.1.Before treating different materials from those indicated in paragraph 7.1, please contact the manufacturer to obtain aspecific authorization.
7.3 OPERATORNo special technical knowledge is needed to use this machine.The operator should read this handbook carefully. However, experience with the use of electrical and electronicequipment would be preferable.
Special attention must be paid to the temperatures which can be reached inside the test chamber. Thetemperature range for the equipment given in this handbook ranges from +180C to-20C or -40C or -70C.Before opening the door to handle the tests, set the equipment to values close to ambient temperature andgive enough time for temperature to stabilize itself; wear special gloves that resist at high/low temperatures.
7 USE FORESEEN BY THE MANUFACTURER
7.5 USE OF PROTECTIVE CLOTHINGSuitable protective clothing should be worn according to norms in force in order to protect:- against the temperatures of the test chamber and of the test materials if time is not given for the temperature to reach
acceptable values.
7.6 DANGEROUS AREAS AND WASTE RISKSDuring tests personnel should not enter the chamber or touch the test products; the chamber holds risks atboth high and low temperatures.Take all the necessary precautions and wear suitable protective clothing.If the chamber is opened at high or low temperatures, the gaskets could be damaged.
CH0305-202
CH0305-204
7.4 USE LIMITSThe machine can only be used by specialized personnel.The machine can be switched on only once the compressor oil has been heated.
If the machine has been left unused for over 48 hours, the oil heating proceduremust be carried out as described in paragraph 8.1.
The machine may be used within the temperature and humidity range describedin chapter 3 entitled TECHNICAL SPECIFICATIONS.
This series of machines must not contain:- inflammable and/or explosive liquid or solid materials.- liquid or solid materials which could generate inflammable gases during
evaporation or sublimation.- liquid or solid materials containing chemically aggressive substances.- liquid or solid materials could generate aggressive fumes during evapora-
tion or sublimation.
Always set the relevant software and hardware alarm devicesbefore carrying out a temperature cycle (paragraph 8.2).
-
34
8.1 COMPRESSOR OIL HEATING
8 START-UP
CH0305-F05
8.1
1
23
4This operation is not necessaryCHALLENGE -E serie chambers.
Never start a temperature cycleimmediately after start-up.First heat the compressor oil otherwiseserious damage could be caused.
Turn on the main switch (isolator switch) onthe machine.
Press the START/STOP button 1 (fig. 8.1).If the machine has not been operated for over 48 hours: Wait 8 hours before starting a temperature cycle. The oil heating system will switch off automatically.
If the machine has not been operated for less than48 hours: Wait for about 1-2 hours before starting a temperature
cycle. The oil heating system will switch off automatically.
In order to avoid dead time due to compressor oil heating, leave the machine with the mainswitch pointing to l (ON) and the START/STOP key pointing to START (lamps lights).
Check that the mains supply voltage is the same as the one marked on the rating plate.
8.2 ALARM SET-UP
Always set the relevant software and hardware alarm devices before carryingout a temperature cycle.
Set-up of temperature alarms should be carried out preferable before programming, recalling or carrying out a workcycle. The machine has three alarm levels:
Software alarms (paragr. 8.2.1) for maximum and minimum temperature Hardware alarms (paragr. 8.2.2) for maximum and minimum temperature Fixed alarm for maximum temperature (paragr. 8.2.3)
Theoretical diagram of positions of soft-ware and hardware alarms
maximum temperature software alarm
minimum temperature software alarm
minimum temperature hardware alarm
maximum temperature hardware alarm
WORKINGCYCLE
MIN cycleC
0C
MAX cycle C
8.2
-
35
CH0305-250
Set
up
down
8.2.2 Hardware alarmsThese are set only on the instrument 5.1 (fig. 8.3).
When a temperature cycle (either manual or automatic) has been established, the alarms must be set immediately:
maximum temperature alarm: about 5C above the maximum set value(or a few degrees above the set software alarm)
minimum temperature alarm: about 5C below the minimum set value.(or a few degrees below the set software alarm)
5.1
After pressing the UP and DOWN keys continually, the variation speed is increased after a few seconds.
Under normal operations the two led lights should always be switched on. When a maximum or minimum alarmcondition occurs, the relevant led light switches off (led light 1 for maximum, led light 2 for minimum).
Do not press the SET button for more than three seconds. If this should happen by mistake, the instrument will enterthe programming mode.Do not touch or modify anything! The instrument will automatically return to the normal operation mode after a fewseconds.Modification of parameter programming could prevent the instrument from operating correctly. If this should occur,contact the ANGELANTONI Industrie S.p.A. technical assistance service before carrying out the test.
Error signalsThe instrument also visualizes the following messages: probe has short circuitedEEE probe interrupted, probe not connected or upper/lower visualization limits of the instrument have been
exceeded.
If the probe is damaged, please contact the ANGELANTONI Industrie S.p.A. technical assistance service. If the probehas to be replaced, make sure that probe connections are also checked at the same time.
Minimum temperature alarm set-up (channel 2) Press the SET key twice: the led warning light 2 will
flash. Press the UP and DOWN keys to set the value. Wait a
few seconds, led warning light 2 will stop flashing andthe new value will be memorized automatically.
8.2.1 Software alarmsThese are set on the control panel 4 (fig. 8.1).For information on how to operate this programming, please refer to the attached OP7 instruction handbook.When a temperature cycle (either manual or automatic) has been established, the alarms must be set immediately: maximum temperature alarm: about 5C above the maximum set value minimum temperature alarm: about 5C below the minimum set value.
Maximum temperature alarm set-up (channel 1) Press the SET key: the led warning light 1 will flash. Press the UP and DOWN keys to set the value. Wait a few seconds, led warning light 1 will stop flashing
and the new value will be memorized automatically.
8.3
-
36
8.3 OPERATIONAL CHECK Set a temperature value (e.g. 20C) on the control panel and start a work cycle (refer to the attached OP7 handbook). Open the upper door (only for three-phased chambers) and check that the chamber fan motor is turning in the direction
indicated by the arrow marked on the motor itself.If the motor is turning in the opposite direction, change over the phases on the supply. The operation must be carriedout by qualified personnel.
CH0305-290
Before carrying out a climatic cycle (tempera-ture-humidity): Fill the humidification system tank with
demineralized water or open the water sup-ply circuit.
A
1Gauze 1 must always be kept clean andwhite, that is to say intact; if it shows adeposit or appears dirty or blackened,replace it immediately.
The gauze must always be wet.
When climatic tests are not being carriedout, remove the gauze to avoid its wearand tear.
2
3
Tests at high temperatures may mean thatthe gauze has to be replaced for each test.
8.4 CONTROL OF WET BULB GAUZE (climatic chambers)
8.2.3 Fixed alarm for maximum temperature This is triggered when the maximum admissible temperature value is exceeded accidentally.
The voltage is switched off and the technical assistance service must be contacted.
1 Wet bulb gauze(A= 30 mm min.)(Length about 120 mm)
2 Dry bulb probe3 Wet bulb probe
8.4
-
37
9 USE
Before carrying out any test cycles, start up the machine asdescribed in chapter 8 and always remember to:
- heat the compressor oil (paragraph 8.1);- set the alarms (paragraph 8.2);- check the wet bulb gauze (paragraph 8.4) (only for climatic
chambers).
Open the tap above connection 10 (figs. 9.3-4) for a supplyof demineralized water or directly fill the special container 3(fig. 9.2) (only for climatic chambers).
Open the tower or well water supply at connection 12 (fig.9.4) (only for machines equipped with water condenser).
Check that the plug to close the port hole is closed (fig. 9.1).
CH0305-F06
9
10
13
12
9
10
CH0305-F07
Machines with air condenser
Machines with water condenser
9.1 LOADING OF THE PRODUCT TO BE TESTED
The products to be tested can be placed on the mobile gridshelves G and on the base B.
Take care not to obstruct the air recirculating holes when youput the products to be tested into place.
Use the already prepared port hole for external connections.
CH0305-F26
B
T
T
GV
CH0305-300
CH0305-F27
If you have used the port hole for pipes and cables, makesure that the hole itself is adequately closed and insulated.
Warning! the chamber can reach dangerous temperatures so make sure that thedoor is locked and remove the key from the handle so that unauthorizedpersonnel cannot gain access.
CH0305-F14
3
9.1
9.2
9.3
9.4
9.5
9.6
-
38
CH0305-F29
CH0305-F23
CH0305-F24
CH
0305
-F25
Installation of mobile grid shelves
Open the chamber door.
Mount supports S at the required height and carry out theoperations shown in figs. 9.8 and 9.9.
Insert the grid shelf G and check that:- it is stable.- it rests squarely on the four supports.
G
S
9.7
9.8
9.9
9.10
-
39
SIEMENS SIMATIC OP7
F1 F2 F3 F4
K1 K2 K3 K4
7 8 94 5 61 2 3. 0 +/- SHIFT INSDEL HELP ENTER
ACX
ESC
9.2 SET-UP FOR A TEMPERATURE CYCLE
To set up and carry out a work cycle with the chamber, please refer to the attached instructions according to the controlsystem with which your chamber is equipped:
OP7 operator panel with built-in software
OP7instructionhandbook
WINKRATOSinstructionhandbook
CH0305-F11
Personal computer (PC) withWINKRATOS software
WINDOWS 95 platform with the following specifications: Measurement of the pressures of the different parts of the cooling circuit. Control of the thermoclimatic variables (by means of PLC). Control of chamber alarm and safety signals. Possibility to run auxiliary switches to control external loads Possibility to read and file data referring to additional user analogic inputs. WINKRATOS supports WINDOWS 95 compatible B/W and colour printers
Control system layout:For the Personal Computer characteristics please refer to the WINKRATOS handbook.
The S/W WINKRATOS package (hereafter referredto only as WINKRATOS) controls the CHALLENGEthermostatic and climatic chambers both in MANUALMODE and in PROGRAMME MODE.
The WINKRATOS software also runs a completethermoclimatic cycle file and a LOG file of all theoperational sessions memorized that need to beregistered.
Note: The manufacturer reserves the right to modify the WINKRATOS software without any obligation to update previous versions and their relevantinstruction handbooks.
AN0698-360
-
40
9.3 UV LAMP (optional)The ultraviolet ray lamp is generally used for ageing testson paints, plastic materials, rubber ....The lamp can be installed only on machines that have beenprepared specially for the lamp at the factory; these ma-chines have been equipped with a hole and socket in whichto fit the lamp.
The UV lamp can be used in the following temperaturerange:
from 0C to +40C
When tests are carried out without the UV lamp, remove thelatter from the chamber and cover the hole where it fits in;in this way a medium working life (of about 300h) will beguaranteed for the lamp. Replace the lamp very carefully.The UV lamp is automatically switched on.
How to assemble the UV lamp. Gently remove lamp L from the packaging and insert it
into the protective tube P (fig. 9.11-12). Push it in as far as it will go and use the screws V to fasten
the two pieces (fig. 9.13). Place the whole piece into position on the machine (fig.
9.14) and use the cable C supplied with the machine toconnect it to the socket K.
UV rays are dangerous to the eyes.When the lamp is used on machines with an inspection hatch, the protective screenmust always be put into position.
CH
0305
-F40
CH
0305
-F41
P
L
Warning: Do not touch or handle the lampwith bare hands. Always wear eithercotton or rubber gloves.
CH0305-F42
V
P
L
FK
C
Lamp specifications:Supply voltage: 230VAbsorption: 125W
CH0305-F43 CH0305-F44
CH
0305
-F45
CH
0305
-F46
9.11
9.12
9.13 9.14 9.15
9.16 9.17
-
41
9.4 SHUTDOWN On the OP7 control panel (see relevant handbook):
in the manual mode p