andreas kalantzis portfolio

Andreas Kalantzis Structural Engineer Portfolio

Andreas Kalantzis

Senior Structural Engineer

M. Eng Structural Engineering with more than 9 years of experience

Analysis, design, detailing of structures with the use of Etabs, Robot, Sofistik, Safe

Specialized in Earthquake resistant structures

Capable to apply construction codes(Eurocodes)


2015 – Three storey RC apartments building, Greece

Private Work – 350000,0 euros

Personal Tasks: a. Design of the architectural layout in autocad 2015(2D/3D)

b. Modal response spectrum analysis in Etabs, Robot according to EC2, 8

c. Design of the reinforcement plans, detailing of the cross sections

d. Total cost estimation for concrete, steel, time schedule (Gantt chart)


2014 - Industrial factory for the production of bricks

Private work- 150000,0 euros

Personal Tasks: a. Creation of the bearing steel structure in Robot 2014, Etabs

b. Analysis to obtain the optimized type of steel cross section

c. Design of the raft foundation in Safe

d. Extensive calculation of wind loads


2014 - Swimming Pool

Private work – 45000,0 euros

Personal tasks: a. Design of the architectural layout in autocad 2015(2D/3D)

b. Model and analyze of the bearing structure in Robot

c. Preparation of technical approval documents to obtain the construction permit

d. Supervising engineer, responsible for the implementation of the reinforcement plans


2011 – Reataining Wall


Personal tasks: a. Analysis of the structure using shell finite elements in Robot 2014

b. Configuration of the steel reinforcement plans for the retaining wall and the wall foot in Safe


2011 – Individual two storey RC residence


Personal Tasks: a. Design of the architectural layout to mach the daily needs of the client(4 member family) in autocad (2D/3D)

b. Model of the bearing structure in Robot according to EC2, 8

c. Preparation of technical approvement documents to obtain the building permit

d. Supervising engineer, responsible for the implementation of reinforcement plans


2010 – Commercial five story building of apartments and stories


Personal Tasks: a. Conceptual thinking for the creation of the bearing structure/load system in order to combine commercial stores

at the base floor and apartments, offices at the upper floors.

b. Modal response spectrum analysis performed in Etabs, calculation of the slab and raft foundation

reinforcements in Safe.


2009 – Four storey RC apartments building


Personal Tasks: a. Design of the architectural layout in autocad 2007 (2D/3D)

b. Analysis in Etabs and use of Safe for the slabs and spread footing foundation


Bridges (No work Experience)

Capable to design ductile (q>1.5) RC bridges or limite ductile bridges (q<1.5)

Extensive knowledge of bridges behaviour under lateral loads on both directions


Thesis – University of Patras, Department of Civil Engineering

‘’ Analysis and design of large scale RC theater according to Eurocodes 2, 8

andreas kalantzis portfolio

Documents