and pollution prevention - us epa › pesticides › chem_search › ppls › 007969-001… · and...

X

UNITED STATES ENVIRONMENTAL PROTECTION AGENCYWASHINGTON, D.C. 20460

OFFICE OF CHEMICAL, SAFETYAND POLLUTION PREVENTION

David HaugheyBASF CorporationPO Box 1352826 Davis Dr SEP 05206Research Triangle Park, NC 27709

Subject: Labeling Amendment to Cabrio EG FungicideEPA Registration No. 7969-187Decision Nos. 468299, 479370PP#2E8069 (Decision # 468304)Submission Date: 6/27/12

Dear Mr Haughey:

The master and supplemental labels referred to above, submitted under the Federal Insecticide,Fungicide, and Rodenticide Act, as amended to expand the use of: Vegetable, bulb, group3-07;Vegetable, fruiting, group 8-10; Fruit, pome, group 11-10; Caneberry subgroup 13-07A; Bushberrysubgroup 13-07B; Fruit, small, vine climbing, except fuzzy kiwi, subgroup 13-07F; Berry, low growing,subgroup 13-07G, include plant health claims, and improve the readability of the label is unconditionallyacceptable under FIFRA section 3(c)(5).

On the supplemental label in the statement "This supplemental label expires December 31, 2016and must not be used or distributed after this date," replace the date "December 31, 2016" with the datethree years from the date of this letter.

A stamped copy of the master and supplemental labels are enclosed for your records. Pleasesubmit one (1) final printed copy for the above mentioned label before releasing the product forshipment. If you have any questions, please contact Dominic Schuler at (703) 347-0260 or via email [email protected].

Sincerely,

Tony KishProduct Manager 22Fungicide BranchRegistration Division (7504P)

BASF Fungicide

The Chemical CompanyA C C E P T E D

SEP 0 5 2013Under thcfttdorailasecUdd*.Fuagidda. end RodraUdd* Act.*""»»*•*• j« the pMttddet»otetoi«|--J

EG fungicide

For use in disease control and plant health in the following crops: berries;Brassica leafy vegetables; bulb vegetables; cucurbit vegetables; fruiting vegeta-bles; grapes; hops; leafy vegetables; leaves of root and tuber vegetables; lowgrowing berry; pistachio; pome fruit; root vegetables; small fruit, vine climbing;stone fruits; strawberries; and tree nuts

Active Ingredient:pyraclostrobin: (carbamic acid, [2-[[[1-(4-chl6rophenyl)-1/-/-pyrazol-3-yl]oxy]methyl]phenyl]methoxy-, methyl ester) 20.0%Other Ingredients: 80.0%Total: 100.0%

EPA Reg. No. 7969-187

KEEP OUT OF REACH OF CHILDREN

CAUTION/PRECAUCION

EPA Est. No.

Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted endetalle. (If you do not understand this label, find someone to explain it to you in detail.)

See inside for complete First Aid, Precautionary Statements, Directions For Use,Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions.

In case of an emergency endangering life or property involving this product,call day or night 1-800-832-HELP (4357).

Net Contents:

BASF Corporation26 Davis Drive, Research Triangle Park, NC 27709

FIRST AID

If swallowed

If on skin or clothing

If in eyes

If inhaled

• Call a poison control center or doctor immediately for treatment advice.• Have person sip a glass of water if able to swallow.• DO NOT induce vomiting unless told to do so by a poison control center or doctor.• DO NOT give anything to an unconscious person.

• Take off contaminated clothing.• Rinse skin immediately with plenty of water for 1 5 to 20 minutes.• Call a poison control center or doctor for treatment advice.

• Hold eyes open and rinse slowly and gently with water for 1 5 to 20 minutes.• Remove contact lenses, if present, after first 5 minutes; then continue rinsing eyes.• Call a poison control center or doctor for treatment advice.

• Move person to fresh air.• If person is not breathing, call 91 1 or an ambulance; then give artificial respiration,

preferably by mouth to mouth, if possible.• Call a poison control center or doctor for further treatment advice.

HOTLINE NUMBER

Have the product container or label with you when calling a poison control center or doctor or going for treatment. Youmay also contact BASF Corporation for emergency medical treatment information at 1 -800-832-HELP (4357).

Precautionary Statements

Hazards to Humans and Domestic Animals

CAUTION. Harmful if swallowed or absorbed throughskin. Causes moderate eye irritation. Avoid contact witheyes, skin or clothing.

Personal Protective Equipment (PPE)

Some materials that are chemically resistant to thisproduct are listed below. For more options, refer toCategory A on an EPA chemical-resistance categoryselection chart.

Applicators and other handlers must wear:

• Long-sleeved shirt and long pants• Chemical-resistant gloves made of any waterproof mate-

rial (such as nitrite, butyl, neoprene, and/or barrierlaminate)

. • Shoes plus socks

Follow the manufacturer's instructions for cleaning andmaintaining PPE. If no such instructions for washablesexist, use detergent and hot water. Keep and wash PPEseparately from other laundry.

Engineering Controls Statement

When handlers use closed systems, enclosed cabs, or air-craft in a manner that meets the requirements listed in theWorker Protection Standard (WPS) for agriculturalpesticides [40 CFR 170.240(d)(4-6)], the handler PPErequirements may be reduced or modified as specified inthe WPS.

USER SAFETY RECOMMENDATIONS

Users should:

• Wash hands before eating, drinking, chewing gum,using tobacco, or using the toilet.

• Remove clothing/PPE immediately if pesticide getsinside. Then wash thoroughly and put on clean clothing.

• Remove PPE immediately after handling this product.Wash the outside of gloves before removing. As soonas possible, wash thoroughly and change into cleanclothing.

Environmental Hazards

This product may contaminate water through drift of sprayin wind. This product has a potential for runoff for severalmonths or more after application. Poorly draining soils andsoils with shallow water tables are more prone to producerunoff that contains this product. A level, well-maintainedvegetative buffer strip between areas to which this productis applied and surface water features such as ponds,streams, and springs will reduce the potential for contami-nation of water from rainfall runoff. Runoff of this productwill be reduced by avoiding applications when rainfall isforecast to occur within 48 hours. Sound erosion controlpractices will reduce this product's contribution to surfacewater contamination.

This pesticide is toxic to fish and aquatic invertebrates.Drift and runoff may be hazardous to aquatic organisms inwater adjacent to treated areas. DO NOT apply directly towater, areas where surface water is present, or intertidalareas below the mean high water mark. DO NOT contam-inate water when disposing of equipment washwaters orrinsate.

Groundwater AdvisoryThis chemical has properties and characteristics associat-ed with chemicals detected in groundwater. This chemicalmay leach into groundwater if used in areas where soilsare permeable, particularly where the water table is shal-low.

Directions For UseIt is a violation of federal'law to use this product in a man-ner inconsistent with its labeling. DO NOT apply thisproduct in a way that will contact workers or other per-sons, either directly or through drift. Only protectedhandlers may be in the area during application. For anyrequirements specific to your state or tribe, consult theagency responsible for pesticide regulation.

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling andwith the Worker Protection Standard, 40 CFR part 170.This standard contains requirements for the protection ofagricultural workers on farms, forests, nurseries, andgreenhouses, and handlers of agricultural pesticides. Itcontains requirements for training, decontamination,notification, and emergency assistance. It also containsspecific instructions and exceptions pertaining to thestatements on this label about personal protective equip-ment (PPE), notification to workers, and restricted-entryinterval. The requirements in this box only apply to usesof this product that are covered by the Worker ProtectionStandard.

DO NOT enter or allow worker entry into treated areasduring the restricted-entry interval (REI) of 12 hours for allcrop uses except when performing cane tying, cane turn-ing or cane girdling on grapes. The REI is 5 days fortreated grapes when conducting cane tying, cane turningor cane girdling.

PPE required for early entry to treated areas that is per-mitted under the Worker Protection Standard and thatinvolves contact with anything that has been treated,such as plants, soil, or water, is:

• Coveralls• Chemical-resistant gloves, made of any waterproof

material (such as nitrile, butyl, neoprene, and/or barrierlaminate)

• Shoes plus socks

STORAGE AND DISPOSAL

DO NOT contaminate water, food, or feed by storage ordisposal.

Pesticide StorageStore in original containers only. Keep container closedwhen not in use. DO NOT store near food or feed.

Pesticide DisposalWastes resulting from using this product may be dis-posed of on-site or at an approved waste disposal facili-ty. If these wastes cannot be disposed of according tolabel instructions, contact your State Pesticide orEnvironmental Control Agency, or the Hazardous Wasterepresentatives at the nearest EPA Regional Office forguidance.

Container HandlingNonrefillable Container. DO NOT reuse or refill thiscontainer. Triple rinse or pressure rinse container(or equivalent) promptly after emptying. Then offer forrecycling, if available, or puncture and dispose of in anapproved sanitary landfill, or by incineration, or, if allowedby state and local authorities, by burning. If burned, stayout of smoke.

Triple rinse containers small enough to shake(capacity <, 50 pounds) as follows: Empty the remain-ing contents into application equipment or a mix tank. Fillthe container 1/4 full with water and recap. Shake for10 seconds. Pour rinsate into application equipment or amix tank, or store rinsate for later use or disposal. Drainfor 10 seconds after the flow begins to drip. Repeat thisprocedure two more times.

Triple rinse containers too large to shake (capaci-ty > 50 pounds) as follows: Empty the remaining con-tents into application equipment or a mix tank. Fill thecontainer 1/4 full with water. Replace and tighten clo-sures. Tip container on its side and roll it back and forth,ensuring at least one complete revolution, for 30 sec-onds. Stand the container on its end and tip it back andforth several times. Turn the container over onto its otherend and tip it back and forth several times. Empty the rin-sate into application equipment or a mix tank, or storerinsate for later use or disposal. Repeat this proceduretwo more times.

Pressure rinse as follows: Empty the remaining con-tents into application equipment or mix tank. Holdcontainer upside down over application equipment or mixtank, or collect rinsate for later use or disposal. Insertpressure rinsing nozzle in the side of the container andrinse at about 40 PSI for at least 30 seconds. Drain for10 seconds after the flow begins to drip.

In Case of Emergency

In case of large-scale spillage regarding this product, call:

•CHEMTREC 1-800-424-9300• BASF Corporation 1 -800-832-HELP (4357)

In case of medical emergency regarding this product, call:

• Your local doctor for immediate treatment• Your local poison control center (hospital)• BASF Corporation 1 -800-832-HELP (4357)

Steps to be taken in case material is released orspilled:

• In case of spill on floor or paved surfaces, mop andremove to chemical waste storage area until proper dis-posal can be made if product cannot be used accordingto label.

• Dike and contain the spill with inert material (sand, earth,etc.) and transfer liquid and solid diking material to sepa-rate containers for disposal.

• Remove contaminated clothing and wash affected skinareas with soap and water.

• Wash clothing before reuse.• Keep the spill out of all sewers and open bodies of

water.

Product Information

This package contains Cabrio® EG fungicide, a water-dispersible granule (EG). The active ingredient in Cabrio,pyraclostrobin, is a member of the strobilurin class ofchemistry and is derived from a natural antifungal sub-stance. Preventive applications optimize disease controlresulting in improved plant health. The increase in planthealth comes from the combined effect of disease control(including fungal diseases listed in Crop-specific direc-tions), improved growth efficiency and improved stress tol-erance. Overall increased plant health may result in animprovement in crop growth and crop quality as well asincreased crop yields. To maximize disease control, applyCabrio in a regularly scheduled protective spray programand use in a rotation program with other fungicides.

Information regarding the contents and levels of metals inthis product is available on the Internet athttp://www.aapfco.org/metals.htm.

Because of its high specific activity, Cabrio has goodresidual activity against target fungi.

Cabrio is not for use in greenhouse or transplantproduction.

Mode of Action

Pyraclostrobin, the active ingredient of Cabrio, belongs tothe group of respiration inhibitors classified by the US EPAand Canada PMRA.as quinone outside inhibitors (Qol), ortarget site of action,Group 11 fungicides.

Resistance Management

Cabrio contains pyraclostrobin, a Group 11 fungicide,and is effective against pathogens resistant to fungicideswith modes of action different from those of Qol fungicides(target site Group 11), such as dicarboximides, sterolinhibitors, benzimidazoles, or phenylamides.

Fungal isolates resistant to Group 11 fungicides, such aspyraclostrobin, azoxystrobin, fluoxastrobin, trifloxystrobin,and kresoxim-methyl, can eventually dominate the fungalpopulation if Group 11 fungicides are used predominantlyand repeatedly in the same field in successive years as theprimary method of control for the targeted pathogenspecies. This can result in reduction of disease control byCabrio or other Group 11 fungicides.

To maintain the performance of Cabrio in the field,DO NOT exceed the maximum seasonal use rate or thetotal number of applications of Cabrio per season and themaximum number of applications of Cabrio stated inRestrictions and Limitations - All Crops and Table 2.Cabrio® EG fungicide Crop-specific Requirements.Follow label instructions regarding the use of Cabrio orother target site of action Group 11 fungicides that have asimilar site of action on the same pathogens.

When using a Group 11 fungicide as a solo product, thenumber of applications must be no more than 1/3 of thetotal number of fungicide applications per season.

In programs in which tank mixes or pre-mixes of aGroup 11 fungicide with a fungicide of another group areused, the number of Group 11 fungicide (Qol)-containingapplications must be no more than 1/2 of the total numberof fungicide applications per season.

In programs in which applications of Group 11 fungicidesare made with both solo products and mixtures, the num-ber of Group 11 fungicide (Qol)-containing applicationsmust be no more than 1/2 of the total number of fungicideapplications per season.

In fungicide alternation programs of Group 11 (Qol)-containing fungicides with non-Group 11 fungicides ofdifferent modes of action, the maximum number ofsequential applications stated in the Restrictions andLimitations - All Crops and Table 2. Cabrio® EG fungi-cide Crop-specific Requirements, must be alternatedwith at least an equal number of applications of a non-Group 11-containing fungicide prior to using the Group11 (Qol)-containing fungicide again. For example, in caseswhere two sequential applications of a Group 11 (Qol)-containing fungicide are made, follow this block of applica-tions by two or more applications of a non-Group 11 -containing fungicide before using the Group 11 (Qol)-con-taining fungicide again.

Resistance Management AdvisoryThe following instructions can delay the development offungicide resistance:

1. Tank mixtures - Use tank mixtures with effective fungi-cides from different target site of action groups that are

registered/permitted for the same use and that .are effec-tive against the pathogens of concern. Use at least theminimum labeled rates of each fungicide in the tank mix.

2. IPM - Integrate Cabrio® EG fungicide into an overalldisease and pest management program. Follow culturalpractices known to reduce disease development. Consultyour local extension specialist, certified crop advisorand/or BASF representative for additional IPM strategiesestablished for your area. Cabrio can be used in agricul-tural extension advisory (disease forecasting) programswhich recommend application timing based on environ-mental factors favorable for disease development.

3. Monitoring - Monitor efficacy of all fungicides used inthe disease management program against the targetedpathogen and record other factors that may influence fun-gicide performance and/or disease development. If aGroup 11 target site fungicide, such as Cabrio, appearsto be less effective against a pathogen that it previouslycontrolled or suppressed, contact a BASF representative,local extension specialist, or certified crop advisor for fur-ther investigation.

Application Instructions

Apply Cabrio rates as instructed in Table 2. Cabrio* EGfungicide Crop-specific Requirements. Apply Cabriowith ground sprayer, aerial equipment or through sprinklerirrigation equipment. Check equipment frequently for cali-bration.

Under low-level disease conditions, use minimum applica-tion rates. For severe or threatening disease conditions,use the maximum application rates and shortened sprayintervals.

Cleaning Spray EquipmentClean spray equipment thoroughly before and after apply-ing this product, particularly if a product with potential toinjure crops was used prior to Cabrio.

Ground Application

Apply Cabrio in sufficient water to ensure thorough cover-age of foliage, blooms, and fruit. Thorough coverage isrequired for optimum disease control. Complete coverageof the stem, all the way down to the soil, is required forsuppression of soilborne diseases of the stem.

Aerial Application

Use no less than 5 gallons of spray solution per acre. Foraerial application to tree crops, use no less than 10 gallonsof spray solution per acre. DO NOT apply when condi-tions favor drift from target area.

For aerial application in New York State, DO NOTapply within 100 feet of aquatic habitats (such as,but not limited to lakes, reservoirs, rivers, streams,marshes, ponds, estuaries, and commercial fishponds).

rSpray Drift Management

DO NOT spray when conditions favor drift beyond areaintended for application. Conditions that may contribute todrift include thermal inversion, wind speed and direction,spray nozzle/pressure combinations, spray droplet size,,temperature/humidity, etc. Contact your state extensionagent for spray drift prevention guidelines in your area. Allaerial and ground application equipment must be properlymaintained and calibrated using appropriate carriers.Avoiding spray drift at the application site is the responsi-bility of the applicator.

Aerial Application Methods and EquipmentThe interaction of many equipment-related and weather-related factors determines the potential for spray drift. Theapplicator and the grower are responsible for consideringall these factors when making decisions.

DO NOT apply under circumstances where possible driftto unprotected persons, to food, forage, or other plantingsthat might be damaged, or crops thereof rendered unfit forsale, use or consumption can occur. .

DO NOT release spray at a height greater than 10 feetabove the crop canopy unless a greater height is requiredfor aircraft safety.

The following drift management requirements must befollowed to avoid off-target drift movement from aerialapplications to agricultural field crops. These requirementsDO NOT apply to forestry applications, public health usesor to applications using dry formulations.

1. The distance of the outermost nozzles on the boommust not exceed 3/4 the length of the fixed wingspan or90% of rotor blade diameter.

2. Nozzles must always point backward parallel with theair stream and never be pointed downward more than45 degrees.

Where states have more stringent regulations, they mustbe observed.

The applicator must be familiar with and take into accountthe information covered in the aerial drift reduction adviso-ry information.

Information on Droplet SizeThe most effective way to reduce drift potential is to applylarge droplets. Use the largest droplet size consistent withacceptable efficacy. Applying larger droplets reduces driftpotential but will not prevent drift if applications are madeimproperly or under unfavorable environmental conditions(see Wind; Temperature and Humidity; andTemperature Inversions).

Controlling droplet size

• Volume - Use high flow rate nozzles to apply the highestpractical spray volume. Nozzles with higher rated flowsproduce larger droplets.

• Pressure - DO NOT exceed the nozzle manufacturer'srecommended pressures. For many nozzle types, lowerpressure produces larger droplets. When higher flow

rates are needed, use higher flow rate nozzles instead ofincreasing pressure.

• Number of Nozzles - Use the minimum number ofnozzles that provide uniform coverage.

• Nozzle Orientation - Orienting nozzles so that thespray is released parallel to the airstream produces larg-er droplets than other orientations and is recommendedpractice. Significant deflection from the horizontal willreduce droplet size and increase drift potential.

• Nozzle Type - Use a nozzle type that is designed forthe intended application. With most nozzle types, nar-rower spray angles produce larger droplets. Considerusing low-drift nozzles. Solid-stream nozzles orientedstraight back produce the largest droplets and the low-est drift.

WindDO NOT apply at wind speeds greater than 15 mph. Driftpotential is lowest when wind speed does not'exceed10 mph. However, many factors, including droplet sizeand equipment type, determine drift potential at any givenspeed. Avoid applications below 2 mph due to variablewind direction and high inversion potential. Local terraincan influence wind patterns. Every applicator must befamiliar with local wind patterns and how they affect spraydrift.

Temperature and HumidityLow humidity and high temperatures increase the evapo-ration of spray droplets and, therefore, the likelihood ofincreased spray drift. Avoid spraying during conditions oflow humidity and/or high temperatures. When makingapplications in low relative humidity, set up equipment toproduce larger droplets to compensate for evaporation.Droplet evaporation is most severe when conditions areboth hot and dry.

Temperature InversionsApplications must not occur during a temperature inver-sion because drift potential is high. Temperature inversionsrestrict vertical air mixing, which causes small suspendeddroplets to remain in a concentrated cloud. This cloud canmove in unpredictable directions due to the light, variablewinds common during inversions. Temperature inversionsare characterized by increasing temperatures with altitudeand are common on nights with limited cloud cover andlight-to-no wind. They begin to form as the sun sets andoften continue into the morning. Their presence can beindicated by ground fog; however, if fog is not present,inversions can also be identified by the movement ofsmoke from a ground source or an aircraft smoke genera-tor. Smoke that layers and moves laterally in a concentrat-ed cloud (under low wind conditions) indicates an inver-sion, while smoke that moves upward and rapidly dissi-pates indicates good vertical air mixing.

Sensitive AreasThe pesticide must only be applied when the potential fordrift to adjacent sensitive areas (e.g. bodies of water ornontarget crops) is minimal and when wind is blowingaway from the sensitive areas.

rDirections For Use Through SprinklerIrrigation Systems

Sprayer Preparation

Chemical tank and injector system must be thoroughlycleaned. Flush system with clean water.

Application InstructionsApply Cabrio® EG fungicide at rates and timings asrequired in this label.

Use Precautions for Sprinkler IrrigationApplications

• Apply this product only through sprinkler irrigation sys-tems including center pivot, lateral move, end tow, side[wheel] roll, traveler, big gun, solid set, or hand moveirrigation systems. DO NOT apply this product throughany other type of irrigation system.

• Add this product to the pesticide supply tank containingsufficient water to maintain a continuous flow by theinjection equipment. In continuous moving systems,inject this product-water mixture continuously, applyingthe labeled rate per acre for that crop. DO NOT exceed1/2 inch (13,577 gallons) per acre. In stationary or non-continuous moving systems, inject the product-watermixture in the last 15 to 30 minutes of each set allowingsufficient time for all of the required pesticide to beapplied by all the sprinkler heads and applying thelabeled rate per acre for that crop. DO NOT apply whenwind speed favors drift beyond the area intended fortreatment. Crop injury, lack of effectiveness, or illegalpesticide residues in the crop can result from non-uniform distribution of treated water. Thorough coverageof foliage is required for good control. Maintain good agi-tation during the entire application period.

• If you have questions about calibration, contact a stateextension service specialist, equipment manufacturers orother experts.

• The system must contain a functional check valve,vacuum-relief valve, and low-pressure drain appropriatelylocated on the irrigation pipeline to prevent water-sourcecontamination from backflow.

• The pesticide injection pipeline must contain a function-al, automatic, quick-closing check valve to prevent theflow of fluid back toward the injection pump.

• The pesticide injection pipeline must also contain a func-tional, normally closed, solenoid-operated valve locatedon the intake side of the injection pump and connectedto the system interlock to prevent fluid from being with-drawn from the. supply tank when the irrigation system iseither automatically or manually shut down.

• The system must contain functional interlocking controlsto automatically shut off the pesticide injection pumpwhen the water pump motor stops.

• The irrigation line or water pump must include a func-tional pressure switch which will stop the water pump

rmotor when the water pressure decreases to the pointwhere pesticide distribution is adversely affected.

• Systems must use a metering pump, such as a positivedisplacement injection pump (e.g. diaphragm pump),effectively designed and constructed of materials thatare compatible with pesticides and capable of being fit-ted with a system interlock.

• Allow sufficient time for pesticide to be flushed throughall lines and all nozzles before turning off irrigation water.A person knowledgeable of the chemigation system andresponsible for its operation, or under supervision of theresponsible person, shall shut the system down andmake necessary adjustments should the need arise.

• DO NOT connect an irrigation system (including green-house systems) used for pesticide application to a publicwater system unless the pesticide label-prescribed safe-ty devices for public water systems are in place.

Specific Instructions for Public WaterSystems

1. Public water system means a system for the provisionto the public of piped water for human consumption ifsuch system has at least 15 service connections or reg-ularly serves an average of at least 25 individuals dailyat least 60 days out of the year.

2. Chemigation systems connected to .public water systemsmust contain a functional, reduced-pressure zone, back-flow preventer (RPZ) or the functional equivalent in thewater supply line upstream from the point of pesticideintroduction. As an option to the RPZ, the water from thepublic water system must be discharged into a reservoirtank prior to pesticide introduction. There shall be a com-plete physical break (air gap) between the outlet end ofthe fill pipe and the top or overflow rim of the reservoirtank of at least twice the inside diameter of the fill pipe.

3. The pesticide injection pipeline must contain a func-tional, automatic, quick-closing check valve to preventthe flow of fluid back toward the injection pump.

4. The pesticide injection pipeline must contain a function-al, normally closed, solenoid-operated valve located onthe intake side of the injection pump and connected tothe system interlock to prevent fluid from being with-drawn from the supply tank when the irrigation systemis either automatically or manually shut down.

5. The system must contain functional interlocking con-trols to automatically shut off the pesticide injectionpump when the water pump motor stops, or in caseswhere there is no water pump, when the water pressuredecreases to the point where pesticide distribution isadversely affected.

6. Systems must use a metering pump, such as a positivedisplacement injection pump (e.g. diaphragm pump),effectively designed and constructed of materials thatare compatible with pesticides and capable of being fit-ted with a system interlock.

Additives and General TankMixing Information

Cabrio® EG fungicide can be tank mixed with mostrecommended fungicides, insecticides, herbicides, liquidfertilizers, biological control products, adjuvants, and addi-tives as specified in Table 2. Cabrio8 EG fungicideCrop-specific Requirements.

Under some conditions, the use of additives or adjuvantsmay improve the performance of Cabrio. However, allvarieties and cultivars have not been tested with possibletank mix combinations. Local conditions can also influ-ence crop tolerance and may not match those underwhich BASF has conducted testing. Physical incompatibili-ty, reduced disease control, or crop injury may result frommixing Cabrio with other products. Therefore, beforeusing any tank mix (fungicides, insecticides, herbicides,liquid fertilizers, biological control products, adjuvants, andadditives), test the combination on a small portion of thecrop to be treated to ensure that a phytotoxic responsewill not occur as a result of application.

When an adjuvant is to be used with this product, BASFrecommends the use of a Chemical Producers andDistributors Association certified adjuvant. Consult a BASFrepresentative or local agricultural authorities for moreinformation concerning additives.

Mixing Order

1. Water - Begin by agitating a thoroughly clean sprayertank 3/4 full of clean water.

2. Agitation - Maintain constant agitation throughout mix-ing and application.

3. Inductor - If an inductor is used, rinse it thoroughlyafter each component has been added.

4. Products in PVA bags - Place any product containedin water-soluble PVA bags jnto the mixing tank. Waituntil all water-soluble PVA bags have fully dissolved andthe product is evenly mixed in the spray tank beforecontinuing.

5. Water-dispersible products (such as Cabrio, dryflowables, wettable powders, suspension concentrates,or suspo-emulsions)

6. Water-soluble products7. Emulsifiable concentrates (such as oil concentrates

when applicable)8. Water-soluble additives (such as AMS or UAN when

applicable)9. Remaining quantity of water

Make sure each component is thoroughly mixed and sus-pended before adding tank mix partners. Maintainconstant agitation during application. See Table 2.Cabrio® EG fungicide Crop-specific Requirements formore details.

Restrictions and Limitations -All Crops

• DO NOT exceed the maximum product rate (ozs/A) peryear (season), the maximum rate per application, or thetotal number of applications of Cabrio® EG fungicideper year (season) as stated in Table 1. Cabrio® EG fun-gicide Restrictions and Limitations Overview andTable 2. Cabrio® EG fungicide Crop-specificRequirements. Preharvest interval (PHI) restrictions arealso included in these tables.

• DO NOT use Cabrio in greenhouse or transplant pro-duction.

Crop Rotation Restriction

Crops listed on the Cabrio, Headline® fungicide andPristine® fungicide labels can be planted immediately fol-lowing the last application. For all other crops, DO NOTplant sooner than 14 days after the last application.

Ground Application Directed or BandedSprays

The application rates shown in the following tables pertainto both aerial and ground (broadcast) methods of applica-tion. Cabrio can also be applied as a directed or bandedspray over the rows or plant beds, with alleys or rowmiddles left unsprayed. For such uses, reduce the rate ofCabrio in proportion to the area actually sprayed. Use thisadjustment to prevent applying the product at use rateshigher than permitted on this label.

Use the following formula to determine the broadcastequivalent rate for doing directed or banded sprays:

sprayed bed width + unsprayed row middles width= total row width

sprayed bed width in inches x broadcast rate _ band ratetotal row width in inches treated acre field acre

Example: A directed spray application will be made to45 inches plant beds that are separated by 15 inches ofunsprayed row middles.

45 inches sprayed bed width + 15 inches unsprayed rowmiddles = 60 inches total row width

The calculations to determine the appropriate equivalentrate of product to use for this situation based on a labelbroadcast rate of 12 ozs/acre follows:

45 inches sprayed bed width x 12 ozs Cabrio _ 9 ozs Cabrio60 inches total row width treated acre ~ field acre

Table 1. Cabrio® EG fungicide Restrictions and Limitations Overview*

Crop**

Berry Subgroups

Brassica LeafyVegetables Group

Head and Stem

Leafy Greens

Bulb Vegetables Group

Cucurbit VegetablesGroup***

Fruiting VegetablesGroup***

Grapes****

Hops

Leafy VegetablesGroup***(except Brassica)

Leaves of Root andTuber Vegetables***

(except sugar beet)

Low Growing BerrySubgroup(except cranberryand strawberry)

Pistachio

Pome Fruit Group

Root Vegetables, 1B***(except sugar beet)

Small Fruit,Vine ClimbingSubgroup

(except fuzzy kiwifruitand grapes)

Stone Fruits Group

MinimumTime from

Application toHarvest

(PHI) (days)

0

0

3

7

0

0

14

0

0

0

0

14

0

0

14

0

MaximumProduct Rate

per Application(ozs/A)

14

16

12

16

16

12

16

16

16

14

16

.12

16

12

9.5

MaximumNumber ofSequential

Applications

2

2

1

1

1

1(for tomato -

2)

2

2

2

1

2

2

2

1

2

2

MaximumProduct Rateper Season

(ozs/A)(Ibs ai pyraclostrobin)

56(0.7)

64(0.8)

72(0.9)

64(0.8)

96(1.2)

72(0.9)

48(0.6)

64(0.8)

48(0.6)

70(0.875)

64(0.8)

48(0.6)

48(0.6)

72(0.9;

47.5(0.6)

(continued)

rTable 1. Cabrio® EG fungicide Restrictions and Limitations Overview* (continued)

Crop**

Strawberries

Tree Nuts Group

MinimumTime from


(PHI) (days)

0

14(for almond -

25 days)

MaximumProduct Rate

per Application(ozs/A) •

14

9.5


Applications

2

2


(ozs/A)(Ibs ai pyraclostrobin)

70(0.875J

38(0.475)

* See Table 2. Cabrio® EG fungicide Crop-specific Requirements for complete directions and exceptions.

** For a complete list of crops within a crop group, see Table 2. Cabrio® EG fungicide Crop-specificRequirements.

*** Maximum product rate per acre per application may vary for cucurbit vegetables, fruiting vegetables, leafy vegeta-bles, leaves of root and tuber vegetables, and root vegetables depending on target disease. Refer to Table 2.Cabrio® EG fungicide Crop-specific Requirements for maximum rates per application by target disease.

**** DO NOT use on Concord, Worden, Fredonia, or related varieties due to possible foliar injury.

Aerial application is permitted for all labeled crops except for hops. For aerial application in New York State, DONOT apply within 100 feet of aquatic habitats (such as, but not limited to lakes, reservoirs, rivers, streams,marshes, ponds, estuaries, and commercial fish ponds).

10

fTable 2. Cabrio® EG fungicide Crop-specific Requirements

Crop

Berry Subgroups

BushberrySubgroup

Aronia berryBlack currantBlueberry

(highbush andlowbush)

Buffalo currantChilean guavaOi irrantV-/LJI [ dl 1 L

ElderberryEuropean barberryGooseberryHighbush cranberryHoneysuckle, edibleHuckleberryJostaberryJuneberryLingonberryNative currantRed currantSalalSea buckthorn

CaneberrySubgroup

Blackberry(all varieties)

LoganberryRaspberry

(black and red)Wild raspberry

Target Disease

Alternaria leaf spot andfruit rot

lAlternaria spp.)

Anthracnose(Colletotrichum spp.,E/sinoe spp.)

Leaf spot and blotch(Mycosphaere/la spp.,Septoria spp.)

Phomopsis leaf spot,twig blight, and fruit rot

(Phomopsis spp.)

Powdery mildew(Sphaerotheca spp.,Microsphaera spp.,Oidium spp.)

Spur blight(Didymella spp.,Phoma spp.)

Suppression Only:

Botrytis gray mold(Botrytis cinerea)

Monilinia blight(Monilinia spp.)

Rust(Pucciniastrum spp.,Arthuhomyces spp.,Phragmidium spp.,Kuehneo/a spp.)

Product UseRate per

Application(ozs/A)

14


Applications

2


(ozs/A) •

56

(0.7 Ibat/acre)

MinimumTim** fromi ii 1 ic 1 1 \t\ 1 1

Application toUlonracirial VC791

.(PHI) (days)

0

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7- to 14-dayinterval. Use the shorter interval when disease pressure is high.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.7 Ib aipyraclostrobin (= 56 ozs Cabrio) per acre per season. DO NOT make more than two (2) sequential applications ofCabrio before alternating to a labeled non-Group 11 fungicide with a different mode of action.

11

13, l_

Table 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop

Brassica LeafyVegetables Group

Head and StemBroccoliBroccoli, ChineseBrussels sproutsCabbageCabbage, ChineseCabbage,

Chinese mustardCauliflowerCavalo broccoloKohlrabi

Target Disease

Alternaria leaf spot(Alternaria spp.)

Anthracnose(Co/letotrichum spp.)

Black leg(Phoma lingan)

Cercospora leaf spot(Cercosporabrassicicola)

Downy mildew(Peronosporaparasitica)

Powdery mildew(Erysiphe polygon/)

Rhizoctonia blight(Rhizoctonia solan!)

Ring spot(Mycosphaerellabrassicicola)

White leaf spot(Pseudocercosporellacapsellae)

White rust(Albugo Candida)

Product UseRate per

Application(ozs/A)

12 to 16


Applications

2


(ozs/A)

64

(0.8 Ibai/acre)

MinimumTime from


(PHI) (days)

0

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7- to 14-dayinterval. Use the higher rate and shorter interval when disease pressure is high.


12

f i.Table 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop

Brassica LeafyVegetables Group(continued)

Leafy GreensBroccoli raabChinese cabbage

(bok choy)CollardsKaleMizunaMustard greensMustard spinachRape greens

Target Disease


Anthracnose(Colletotrichum spp.)

Cercospora leaf spot(Cercosporabrassicicola)

Downy mildew(Peronosporaparasitica)

Powdery mildew(Erysiphe polygon!)

Ringspot(Mycosphaerellabrassicicola)


Suppression Onlv:

Rhizoctonia stem rot(Rhizoctonia solani)

Sclerotinia stem rot(Sc/erotiniasclerotiorum)

Southern blight(Sclerotium rolfsii)

Product UseRate per

Application(ozs/A)

12 to 16


Applications

1


(ozs/A)

64

(0.8lbai/acre)

MinimumTime from

Application toHarvp^t1 lul VCO1

(PHI) (days)

3 •

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7- to 1 0-dayinterval. Use the higher rate and shorter interval when disease pressure is high.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.8 Ib aipyraclostrobin (= 64 ozs Cabrio) per acre per season. DO NOT make more than one (1) application of Cabrio beforealternating to a labeled non-Group 11 fungicide with a different mode of action.

13

r TL.


Crop

Bulb VegetablesGroup

Chive, fresh leavesChive, Chinese,

fresh leavesDaylily, bulbElegans hostaFritillaria, bulbFritillaria, leavesGarlic, bulbGarlic'

great-headed, bulbGarlic, serpent, bulbKurratLady's leekLeekLeek, wild

• Lily, bulbOnion, Beltsville

bunchingOnion, bulbOnion, Chinese,

bulbOnion, freshOnion, greenOnion, macrostemOnion, pearlOnion, potato, bulbOnion, tree, topsOnion, Welsh, topsShallot, bulbShallot, fresh leaves

Cultivars, varietiesand/or hybrids ofthese

Target Disease

Powdery mildew(Leveillula taurica)

Purple blotch andleaf blight

(Alternaria porri,Stemphylium

vesicarium)

Rust(Puccinia porn)

Downy mildew(Peronosporadestructor)

Suppression Onlv:

Botrytis leaf blight(Botrytis squamosa)

Product UseRate per

Application(ozs/A)

8 to 12

12


Applications

1


(ozs/A)

72

(0.9 toai/acre)

MinimumIVIII III 1 IUI 1 1

Time fromApplication to

Marvocfncii V^OL

(PHI) (days)

7

Application Directions. Begin applications of Cabrio prior to disease development. Make each application of Cabrioin rotation with at least one (1) application of another labeled non-Group 11 fungicide on a 7-day interval. Use thehigher rate when disease pressure is high.

Applications made to control purple blotch, powdery mildew, and rust will also suppress downy mildew. If downymildew occurs during a Cabrio application for these diseases, immediately follow the Cabrio application with anotherdowny mildew fungicide with a different mode of action.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.9 Ib pyra-clostrobin (= 72 ozs Cabrio) per acre per season. DO NOT make more than one (1) application of Cabrio beforealternating to a labeled non-Group 11 fungicide with a different mode of action.

14

r II "L


Crop

Cucurbit VegetablesGroup

Includes all types andhybrids of:ChayoteChinese waxgourdCitron melonCucumberGherkinPumpkinWatermelon

Edible GourdChinese okraCucuzzaHechimaHyotan

Momordica spp.Balsam appleBalsam pearBitter melonChinese cucumber

MuskmelonCantaloupeCasabaCrenshaw melonGolden pershawmelon

Honeydew melonHoney ballsMango melonPersian melonPineapple melonSanta Glaus melonSnake melon

Summer SquashCrookneck squashScallop squashStraightnecksquash

Vegetable marrowZucchini

Winter SquashAcorn squashButternut squashCalabazaHubbard squashSpaghetti squash

Target Disease

Downy mildew(Pseudoperono-spora cubensis)

Alternaria blight(4/te/nar/acucumerina)

Anthracnose(Colletotrichumorbiculare)

Cercospora leaf spot(Cercospora citrulina)

Gummy stem blight(Didymella bryoniae)

Plectosporium blight(P/ectosporiumtabacinum)

Powdery mildew(Sphaerothecafuliginea, Erysiphecichoracearum)

Target leaf spot(Corynesporacassiicola)

Product UseRate per

Application(ozs/A)

8 to 12

12 to 16


Applications

1


(ozs/A)

64

(0 8 Ih\\-r- U iM

ai/acre)

DO NOT makemore than

4 applicationsper growing

season.

MinimumTime from


(PHI) (days)

0

See Cucurbit Vegetables Group Information following, (continued)

15

c rCucurbit Vegetables Group Information

Application Directions. Begin applications of Cabrio®EG fungicide prior to onset of disease development andcontinue on a 7- to 14-day interval.

Use the higher rate and the shorter interval when diseasepressure is high.

DO NOT use Cabrio for control of gummy stem blightwhere resistance to Qol (Group 11) fungicides exists.

Tank Mixes with Adjuvants and Other Products. BASFevaluations indicate that tank mixes of additives,adjuvants, and/or other products with Cabrio on cucurbitvegetables may result in injury. This is particularly true formuskmelon crops such as cantaloupe and honeydew.Users need to be aware of this, proceed with caution, andtest for crop safety when tank mixing, as stated below.

Applications of additives, adjuvants, and/or other productsthat increase penetration may cause injury when mixedwith Cabrio. Injury potential from these kinds of tankmixes may decrease with lower rates of the tank mixpartner. Users are advised to test for crop safety, as statedbelow.

BASF has not tested all varieties and cultivars with allpossible tank mix combinations and rates of additives,adjuvants, and/or other products. Local environmentalconditions also influence crop tolerance and may notmatch those under which BASF has conducted testing.Physical incompatibility, reduced disease control, or cropinjury may result from mixing Cabrio with other products.

To the extent consistent with applicable law, the userassumes all risks associated with adding products to theCabrio spray solution, Refer also to the Conditions ofSale and Warranty section of this label.

To minimize the likelihood of crop injury, BASFrecommends testing Cabrio in combination with additives,adjuvants, and/or other products for crop safety on a smallportion of the crop. However, environmental variabilityprecludes direct and consistent projection of small areatest results to future use.

Consult a BASF representative for more informationconcerning additives or adjuvants.

DO NOT tank mix Cabrio with malathion, Kelthane®agricultural miticide, Thiodan® insecticide, Phaser9

insecticide, Lannate® insecticide, Lorsban®insecticide, M-Pede® insecticide/fungicide, orBotran® fungicide as crop injury may result.

Resistance Management. To limit the potential for devel-opment of resistance, DO NOT apply more than' 0.8 Ib aipyraclostrobin (= 64 ozs Cabrio) per acre per crop grow-ing season. DO NOT make more than one (1) applicationof Cabrio before alternating to a labeled non-Group 11fungicide with a different mode of action.

For additional resistance management information, refer toResistance Management, in the Product Informationsection.

16

rTable 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop

Fruiting VegetablesGroup

African eggplantBush tomatoBell pepperCoconaCurrant tomatoEggplantGarden huckleberryGoji berryGroundcherryMartyniaNaranjillaOkraPea eggplantPepinoPepper

(all varieties)Nonbell pepperRoselleScarlet eggplantSunberryTomatilloTomatoTree tomatoCultivars, varietiesand/or hybrids ofthese

Target Disease


Black mold(Alternaria alternata)

Early blight(fllternaria so/an/)

Septoria leaf spot(Septoria lycopersici)

Target spot(Corynesporacassiicola)

Late blight(Phytophthorainfestans)


Suppression Only:

Botrytis gray mold*(Botrytis cinerea)

Rhizoctonia stem rot*(Rhizoctonia solan!)

Sclerotinia stem rot*(Sclerotiniasclerotiorum)

Southern blight*(Sclerotium rolfsii)

Product UseRate per

Application(ozs/A)

8 to 12

or

8 to 1 2 ozsper 100 gallons

of sprayvolume (dilute)**

8 to 16

12to16


Applications

1

(for tomato -2 )


(ozs/A)

96

(1.2 Ibsai/acre)

MinimumTime from

Application toUl 3 n/Aotnoi wo i

(PHI) (days)

0

* Not registered for use in California.

See Fruiting Vegetables Group Information following, (continued)

17

fFruiting Vegetables Group InformationApplication Directions. Begin applications of Cabrio®EG fungicide prior to disease development and continueon a 7- to 14-day interval for anthracnose, black mold,early blight, powdery mildew, Septoria leaf spot, and targetspot. For control of late blight, begin applications prior todisease development, then follow each application ofCabrio with a labeled fungicide with a different mode ofaction 5 to 7 days later. Use the higher rate and the short-er interval when disease pressure is high.

** For applications based on dilute volume, spray plants torunoff. Apply a minimum of 20 gallons of spray volume peracre, and increase the spray volume as the plants growduring the season. Spray proportional volume to theamount of plant tissue to be covered such that 100 gal-lons of spray per acre is used on mature plants.

Use of Adjuvants. The use of additives or adjuvants mayimprove the performance of Cabrio on fruiting vegetables.However, BASF evaluations also indicate that under someconditions (particularly high temperatures and/or highadditive rates), application of Cabrio in combination withcertain rates of silicone-based or oil-containing (petroleumor crop) additives or adjuvants can cause injury.

BASF has not tested all varieties and cultivars with all pos-sible tank mix combinations and rates of additives or adju-vants. Local environmental conditions also influence croptolerance and may not match those under which BASFhas conducted testing. Physical incompatibility, reduced.disease control, or crop injury may result from mixingCabrio with other products.

To the extent consistent with applicable law, the userassumes all risks associated with adding products to theCabrio spray solution. BASF cannot be held responsiblefor crop injury, reduced disease control or incompatibilitydue to additives, adjuvants or other products used in com-bination with Cabrio. Refer also to the Conditions ofSale and Warranty section of this label.

To minimize the likelihood of crop injury, BASF recom-mends testing Cabrio in combination with other productsfor crop safety on a small portion of the crop. However,environmental variability precludes direct and consistentprojection of small area test results to future use.

Consult a BASF representative for more information con-cerning additives or adjuvants.

Resistance Management. To limit the potential for devel-opment of resistance, DO NOT apply more than 1.2 Ibs aipyraclostrobin (= 96 ozs Cabrio) per acre per crop grow-ing season. DO NOT make more than one (1) applicationof Cabrio before alternating to a labeled non-Group 11fungicide with a different mode of action.

In TomatoDO NOT make more than two (2) sequential applicationsof Cabrio before alternating to a labeled non-Group 11fungicide with a different mode of action. For additionalresistance management information, refer to ResistanceManagement, in the Product Information section.

18


Crop

Grapes

Vitis vinifera androtundifolia

(Muscadinevarieties only)

Target Disease

Angular leaf spot(Mycosphaerellaangulata)

Anthracnose(Elsinoe ampelina)

Black rot(Guignardia bidwellii)

Downy mildew(Plasmopara viticola)

Mycosphaerella leafblight

(Pseudocercosporavitis)

Phomopsis(Phomopsis viticola)

Powdery mildew(Uncinula necator)

Ripe rot(Colletotrichumgloeosporioides)

Suppression Onlv:


Product UseRate per

Application(ozs/A)

8 to 12


Applications

2


(ozs/A)

72

(0.9 Ibai/acre)

MinimumTime from


(PHI) (days)

14

Application Directions. For powdery mildew control, begin applications of Cabrio at pre-bloom on a 10- to 21 -dayinterval. For black rot and downy mildew control, begin applications of Cabrio at pre-bloom on a 10- to 14-day inter-val. For all other diseases listed above, begin applications of Cabrio prior to disease development and continue on a10- to 14-day interval. Use the higher rate and the shorter interval when disease pressure is high.

DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hoursexcept when performing cane tying, cane turning, or cane girdling. The REI is 5 days for treated grapeswhen conducting cane tying, cane turning or cane girdling.

DO NOT use on Concord, Worden, Fredonia, or related varieties due to possible foliar injury.


19

r rTable 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop

Hops

Target Disease

Downy mildew(Pseudoperonosporahumuli)

Powdery mildew(Erysiphecichoracearum,Sphaerotheca spp.)

Product UseRate per

Application(ozs/A)

8 to 12 ozsper 1 00 gallonsof dilute spray

(DO NOT usemore than

1 6 ozs per acre)*


Applications

2


(ozs/A)

48

fn R ihai/acre)

MinimumTime from

Application to

(PHI) (days)

0

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 10- to 21-dayinterval. Prior to trellising, use 8 ozs per 100 gallon dilute rate. Use the shorter interval when disease pressure is high.Application rates are based on 100 gallons of dilute spray. Adjust water volume to maintain thorough coverage up to amaximum of 200 gallons per acre. Use 25 to 50 gallons of dilute spray per acre prior to trellising and 100 to 200 gal-lons of dilute spray per acre thereafter. DO NOT use more than 200 gallons per acre of this mixture.

*lf additional spray volume is needed for thorough coverage, use 16 ozs of Cabrio per acre in the required sprayvolume.

Aerial application is not permitted for use of Cabrio in hops.


20


Crop Target Disease

Product UseRate per

Application(ozs/A)


Applications


(ozs/A)

MinimumTime from


(PHI) (days)

Leafy VegetablesGroup(except Brassica)

AmaranthArugulaCardoonCeleryCelery (Chinese)CeltuceChervilChrysanthemum

(edible-leaved andgarland)

Corn saladCress (garden and

Upland)DandelionDockEndiveFennel (Florence)Lettuce (head and

leaf)OrachParsley.Purslane (garden

and winter)Radicchio (red

chicory)RhubarbSpinachSpinach (New

Zealand and vine)Swiss chard-

Alternaria leaf spot(fllternaria spp.)


Ascochyta leaf spot(/\scochyta spp.)

Cercospora leaf spot(Cercospora spp.)

Downy mildew(Peronospora spp.)

Powdery mildew(Erysiphe spp.,Phyllactinia spp.,Sphaerotheca spp.)

Rust(Puccinia spp.,Uromyces spp.)

Septoria leaf spot(Septoria spp.)

12to16 64

(0.8 Ibai/acre)

0

Lettuce downy mildew(Bremia spp.)

16


8 to 12

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7- to 14-dayinterval. Use the higher rate and shorter interval when disease pressure is high.

Tank Mix Restrictions

Spinach (all varieties). Cabrio has been reported to injure spinach under certain conditions. DO NOT apply Cabrioto spinach as a tank mix with any other pesticide products, adjuvants, additives, nutrients or anything other than water.

Leafy Vegetables (except spinach). It is impossible for BASF to test all varieties of leafy vegetables for sensitivity toCabrio under all environments and all potential product mixture combinations. Local conditions can also influence croptolerance and may not match those under which BASF has conducted testing. Proceed with caution with regard toCabrio use, particularly in tank mixes and/or adjuvant combinations on leafy vegetables. To reduce the risk of leafyvegetable injury, BASF recommends testing Cabrio or Cabrio tank mixtures on a small portion of the crop beforebroadscale use.

To the extent consistent with applicable law, the user assumes all risks associated with adding products to the Cabriospray solution. Refer also to the Conditions of Sale and Warranty section of this label.


21


Crop

Leaves of Root andTuber Vegetables(except sugar beet)

Black salsifyCarrotCassava, bitter and

sweetCeleriacChervil

(turnip-rooted)ChicoryDasheenEdible burdockGarden beetOriental radishParsnipRadishRutabagaSweet potatoTanierTurnipYam, true

Target Disease

Alternaria leaf spot(A/ternar/a spp.)


Powdery mildew(Erysiphe spp.)

White rusttfllbugo spp.)

Product UseRate per

Application(ozs/A)

8 to 12

8 to 16


Applications

1


(ozs/A)

48

(0.6 Ibai/acre)

MinimumTime from


(PHI) (days)

0

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7- to 14-dayinterval. Use the higher rate and the shorter interval when disease pressure is high.

No restriction on livestock grazing or feeding for carrot culls.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.6 Ib aipyraclostrobin (= 48 ozs Cabrio) per acre per season. DO NOT make more than one (1) application of Cabrio beforealternating to a labeled non-Group 11 fungicide with a different mode of action.

22


Crop

Low Growing BerrySubgroup(except cranberryand strawberry)

BearberryBilberryCloudberryMuntriesPartridgeberry

Target Disease


Leaf spot(Mycosphaerellafragariae)

Powdery mildew(Sphaerothecamacularis)

Suppression Only:


Product UseRate per

Application(ozs/A)

12 to 14


Applications

2


(ozs/A)

70

(0.875 Ibai/acre)

MinimumTime from


(PHI) (days)

0

Application Directions. Begin applications of Cabrio no later than bloom or prior to disease development andcontinue on a 7 to 14 day interval.

Use the higher rate and the shorter interval when disease pressure is high.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.875 Ib aipyraclostrobin (= 70 ozs Cabrio) per acre per season. DO NOT make more than two (2) sequential applications ofCabrio before alternatng to a labeled non-Group 11 fungicide with a different mode of action.

23

fTable 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop

Pistachio

Application Direction

Resistance Managerpyraclostrobin (= 64 ozCabrio before alternat

For aerial application tc

Target Disease

Late blight(Alternaria alternate)

Shoot blight(Botryosphaeriadothidea)

Product UseRate per

Application(ozs/A)

16


Applications

2


(ozs/A)

64

(0.8 Ibai/acre)

MinimumTime from


(PHI) (days)

14

s. Apply Cabrio prior to disease development and continue on a 10- to 30-day interval.

nent. To limit the potential for development of resistance, DO NOT apply more than 0.8 Ib ais Cabrio) per acre per season. DO NOT make more than two (2) sequential applications ofng to a labeled non-Group 11 fungicide with a different mode of action.

pistachio trees, use no less than 10 gallons of spray solution per acre.

24

r rTable 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop

Pome Fruit Group

. AppleAzaroleCrabappleLoquatMayhawMedlarPearPear, AsianPear, OrientalQuinceQuince, ChineseQuince, JapaneseTejocote


Target Disease

Alternaria blotch(Alternaria mali)

Apple scab(Venturia inaequalis)

Bitter rot(Co/letotrichum spp.)

Black rot and Frogeyeleaf spot(Botryosphaeriaobtusa)

Cedar apple rust(Gymnosporangiumjuniperi- virginianae)

Flyspeck(Zygophialajamaicensis)

Pear scab(Venturia pinna]

Powdery mildew(Podosphaeraleucotricha)

Quince rust(Gymnosporangiumclavipes)

Sooty blotch(Fungal diseasecomplex)

White rot(Botryosphaeriadothidea)

Product UseRate per

Application(ozs/A)

9 to 12


Applications

2


(ozs/A)

48

(0.6 Ibai/acre)

DO NOT makemore than

4 applicationsper season.

MinimumTimp from• ii i ic 1 1 \ji 1 1

Application tol-Jan/Actncii wo i

(PHI) (days)

0

Application directions for scab, powdery mildew, rust and frogeye leaf spot. Begin applications of Cabrio priorto disease development and continue on a 7- to 10-day interval. Use the shorter interval when disease pressure ishigh.

Application directions for sooty blotch, flyspeck, white rot, black rot, bitter rot, and Alternaria blotch. Beginapplications of Cabrio prior to disease development and continue on a 7- to 14-day interval. Use the shorter intervalwhen disease pressure is high.

No restriction on livestock grazing or feeding.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.6 Ib aipyraclostrobin (= 48 ozs Cabrio) per acre per season. DO NOT make more than four (4) applications of Cabrio orother Group 11 fungicides per season. DO NOT make more than two (2) sequential applications of Cabrio beforealternating to a labeled non-Group 11 fungicide with a different mode of action for at least one (1) application.

25


Crop

Root Vegetables, 1 B(except sugar beet)

Black salsifyCarrotCeleriacChervil

(turnip-rooted)ChicoryEdible burdockGarden beetGinsengHorseradishOriental radishParsley

(turnip-rooted)ParsnipRadishRutabagaSalsifySkirretSpanish salsifyTurnip

Target Disease

Alternaria leaf spot(A/temaria spp.)


Powdery mildew(Erysiphe spp.)

White rust(Albugo spp.)

Product UseRate per

Application(ozs/A)

8 to 12

8 to 16


Applications

1


(ozs/A)

48

(0.6 toai/acre)

MinimumTime from


(PHI) (days)

0

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7- to 14-dayinterval. Use the higher rate and the shorter interval when disease pressure is high.

No restriction on livestock grazing or feeding for carrot culls.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.6 Ib aipyraclostrobin (= 48 ozs Cabrio) per acre per crop growing season. DO NOT make more than one (1) application ofCabrio before alternating to a labeled non-Group 11 fungicide with a different mode of action.

26

fTable 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop

Small fruit,vine climbingsubgroup(exceptfuzzy kiwifruit andgrapes)

Amur river grapeGooseberryKiwifruit, hardyMaypopSchisandra berry

Target Disease



Black rot(Guignardia bidwe/lii)

Downy mildew(P/asmopara viticola)

Mycosphaerella leafblight


Phomopsis(Phomopsis viticola) '



Suppression Only:


Product UseRate per

Application(ozs/A)

8 to 12


Applications

2


(ozs/A)

72

(0.9 Ibai/acre)

MinimumTimp from• ii i ic 1 1 \jt 1 1

Application toMon/Act1 IOI WCOl

(PHI) (days)

14

Application Directions. For powdery mildew control, begin applications of Cabrio at pre-bloom on a 10 to 21 dayinterval. For black rot and downy mildew control, begin applications of Cabrio at pre-bloom on a 10 to 14 day interval.For all other diseases listed above, begin applications of Cabrio prior to disease development and continue on a 10 to14 day interval.



27

r 2-T/fL.


Crop

Stone Fruits Group

ApricotCherry

(sweet and tart)NectarinePeachPlum

(all varieties)PlumcotPrune .

\

Target Disease



Monilinia blossom blight(Monilinia spp.)

Powdery mildew(Sphaerotheca spp.,Podosphaera spp.)

Scab(Cladosporiumcarpophi/um) .

Shothole(Wilsonomycescarpophilus)

Product UseRate per

Application(ozs/A)

9.5


Applications

2


(ozs/A)

47.5

(0.6 Ibai/acre)

MinimumTime from


(PHI) (days)

0

Application Directions. Begin applications of Cabrio at pink bud or prior to disease development and continue on a7- to 14-day interval. Use the shorter interval when disease pressure is high.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.6 Ib aipyraclostrobin (= 47.5 ozs Cabrio) per acre per season. DO NOT make more than two (2) sequential applications ofCabrio before alternating to a labeled non-Group 11 fungicide with a different mode of action.

For aerial application to stone fruit trees, use no less than 10 gallons of spray solution per acre.

28


Crop

Strawberries

Target Disease




Suppression Only:


Product .UseRate per

Application(ozs/A)

12 to 14


Applications

2


(ozs/A)

70

(0.875 Ibat/acre)

MinimumTime from


(PHI) (days)

0

Application Directions. Begin applications of Cabrio no later than bloom or prior to disease development and con-tinue on a 7- to 14-day interval. Use the higher rate and the shorter interval when disease pressure is high.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.875 Ib aipyraclostrobin (= 70 ozs Cabrio) per acre per crop growing season. DO NOT make more than two (2) sequentialapplications of Cabrio before alternating to a labeled non-Group 11 fungicide with a different mode of action.

29

c fTable 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Crop Target Disease

Product UseRate per

Application(ozs/A)


Applications


(ozs/A)

MinimumTime from


(PHI) (days)

Tree Nuts Group

AlmondBeech nutBrazil nutButternutCashewChestnutChinquapinFilbertHickory nutMacadamia nutPecanWalnut (black and

English)

Alternaria leaf spot(Mtemaria spp.)


Blossom blight(Monilinia spp.)

Eastern filbert blight(flnisogramma

anomala)

Leaf rust(Tranzschelia discolor)

Scab(Cladosporiumcarpophilum,C. caryigenum)

Shothole(Wilsonomycescarpophilus)

9.5 38

(0.475 Ibai/acre)

14

(for almond25 days)

Application Directions. In almond, begin applications of Cabrio at pink bud and continue on a 7- to 14-day interval.In filbert, begin applications at budswell to budbreak, prior to infection and disease development. Continue on a 7- to14-day interval to cover and protect new growth. In pecan, begin application of Cabrio prior to disease developmentand continue on a 7- to 21-day interval. For all other tree nut crops listed above, apply Cabrio prior to diseasedevelopment and continue on a 7- to 28-day interval. In all cases, use the shorter interval when disease pressure ishigh or shoot growth is very rapid.

No restriction on livestock grazing or feeding for almond hulls.


For aerial application to tree nuts, use no less than 10 gallons of spray solution per acre.

30

-L

Conditions of Sale and Warranty

The Directions For Use of this product reflect theopinion of experts based on field use and tests. Thedirections are believed to be reliable and must befollowed carefully. However, it is impossible to eliminateall risks inherently associated with the use of thisproduct. Crop injury, ineffectiveness or other unintendedconsequences may result because of such factors asweather conditions, presence of other materials, or useof the product in a manner inconsistent with its labeling,all of which are beyond the control of BASFCORPORATION ("BASF") or the Seller. To the extentconsistent with applicable law, all such risks shall beassumed by the Buyer.

BASF warrants that this product conforms to thechemical description on the label and is reasonably fit forthe purposes referred to in the Directions For Use,subject to the inherent risks, referred to above.

TO THE EXTENT CONSISTENT WITH APPLICABLELAW, BASF MAKES NO OTHER EXPRESS ORIMPLIED WARRANTY OF FITNESS ORMERCHANTABILITY OR ANY OTHER EXPRESS ORIMPLIED WARRANTY.

TO THE EXTENT CONSISTENT WITH APPLICABLELAW, BUYER'S EXCLUSIVE REMEDY AND BASF'SEXCLUSIVE LIABILITY, WHETHER IN CONTRACT,TORT, NEGLIGENCE, STRICT LIABILITY, OROTHERWISE, SHALL BE LIMITED TO REPAYMENTOF THE PURCHASE PRICE OF THE PRODUCT.

TO THE EXTENT CONSISTENT WITH APPLICABLELAW, BASF AND THE SELLER DISCLAIM ANYLIABILITY FOR CONSEQUENTIAL, EXEMPLARY,SPECIAL OR INDIRECT DAMAGES RESULTINGFROM THE USE OR HANDLING OF THIS PRODUCT.

BASF and the Seller offer this product, and the Buyerand User accept it, subject to the foregoing Conditionsof Sale and Warranty which may be varied only byagreement in writing signed by a duly authorizedrepresentative of BASF. nos

Cabrio, Headline and Pristine are registered trademarksof BASF.Botran and M-Pede are registered trademarks of GowanCompany, LLC.Kelthane and Lorsban are registered trademarks of DowAgro Sciences LLC.Lannate is a registered trademark of E.I. duPont deNemours and Company.Phaser is a registered trademark of Bayer Crop Science.Thiodan is a registered trademark of Canadian Hoechst,Ltd.

© 2013 BASF CorporationAll rights reserved.

007969-00187.20130327d.NVA 2013-04-089-0053Supersedes: NVA 2012-04-089-0187

Supplemental: NVA 2012-04-089-0133

BASF Corporation26 Davis Drive

Research Triangle Park, NC 27709

The Chemical Company

31

rGroup Fungicide

EG fungicide

For disease control and plant health in bulb vegetables, bushberry andcaneberry, fruiting vegetables, low growing berry (except cranberry), pomefruit, and small fruit, vine climbing (except fuzzy kiwifruit)

This supplemental label expires December 31, 2016 and must not be used or distributed after this date.

Active Ingredient:pyraclostrobin: (carbamic acid, [2-[[[1-(4-chlorophenyl)-1H-pyrazol-3-yl]oxy]methyl]phenyl]methoxy-, methyl ester) 20.0%Other Ingredients: 80.0%Total: .'.. 100.0%

EPA Reg. No. 7969-187

Directions For Use

• It is a violation of federal law to use this product in amanner inconsistent with its labeling.

• The supplemental labeling and the entireCabrio® EG fungicide container label,EPA Reg. No. 7969-187, must be in possession ofthe user at the time of application.

• Read the label affixed to the container for Cabriobefore applying.

• Use of Cabrio according to this labeling is subject tothe use precautions and limitations imposed by thelabel affixed to the container for Cabrio.

Application Instructions

Refer to the Cabrio container label for additionalapplication instructions and restrictions.

For aerial application in New York State, DO NOTapply within 100 feet of aquatic habitats (such as,but not limited to lakes, reservoirs, rivers, streams,marshes, ponds, estuaries, and commercial fishponds).

SEP 0 5 2 0 1 3

Unto th« Pated ImecHcM*Fnagiddo. and Bod«Btidd» Act.as fntmmM, far tho pesticide

Beg. No.

BASF Corporation26 Davis Drive, Research Triangle Park, NC 27709

-BASFThe Chemical Company

rTable 1. Crop-specific Restrictions and Limitations Overview*

Crop**

Bulb vegetablesgroup

Bushberry andCaneberrysubgroups

Fruiting vegetablesgroup***

Low growing berrysubgroup(except cranberry)

Pome fruit group

Small fruit, vineclimbing subgroup(except fuzzykiwifruit)****

Minimum Timefrom Application

to Harvest(PHI) (days)

7

0

0

0

0

14

MaximumProduct Rateper Acre perApplication

(ozs)

12

14

16

14

12

12

Maximum Numberof SequentialApplications

1

2

1

2

2

2

MaximumProduct Rate

per Acreper Season

(ozs)(Ibs ai

pyraclostrobin)

72(0.9)

56(0.7)

96(1.2)

70(0.875)

48(0.6)

72(0.9)

*See Table 2. Cabrio® EG fungicide Crop-specific Requirements for complete directions and exceptions.

**For a complete list of crops within a crop group or crop subgroup, see Table 2. Cabrio® EG fungicide Crop-specific Requirements.

""Maximum product use rate per acre per application may vary for Fruiting vegetables depending on target disease.Refer to Table 2. Cabrio® EG fungicide Crop-specific Requirements for maximum rates per application by targetdisease.

**** In the Small fruit, vine climbing subgroup for use on grapes, DO NOT use on Concord, Worden, Fredonia, orrelated varieties due to possible foliar injury.

Aerial application is permitted for all labeled crop uses. For aerial application in New York State, DO NOT applywithin 100 feet of aquatic habitats (such as, but not limited to lakes, reservoirs, rivers, streams, marshes,ponds, estuaries, and commercial fish ponds).

Table 2. Cabrio EG fungicide Crop-specific Requirements

Crop

Bulb vegetables group

Chive, fresh leavesChive, Chinese, freshleavesDaylily, bulbElegans hostaFritillaria, bulbFritillaria, leavesGarlic, bulbGarlic, great-headed, bulbGarlic, serpent, bulbIf. iproti\urraiLady's leekLeekLeek, wildLily, bulbOnion, Beltsville bunchingOnion, bulbOnion, Chinese, bulbOnion, freshOnion, greenOnion, macrostemOnion, pearlOnion, potato, bulbOnion, tree, topsOnion, Welsh, topsShallot, bulbShallot, fresh leavesCultivars, varieties and/orhybrids of these

Target Disease


Purple blotch and leafblight(Alternaria pom,Stemphyliumvesicarium)

Rust(Puccinia pom)

Downy mildew(Peronosporadestructor)

Suppression Only:

Botrytis leaf blight(Botrytis squamosa)

Product UseRate per

Application(ozs/A)

8 to 12

12


Applications

1

MaximumProductRate perSeason(ozs/A)

72

(0.9 Ibai/acre)

MinimumTime from

Applicationto Harvest(PHI) (days)

7

Application Directions. Begin applications of Cabrio prior to disease development. Make each application of Cabrioin rotation with at least one (1) application of another labeled non-Group 11 fungicide on a 7 day interval.

Use the higher rate when disease pressure is high.

Applications made to control purple blotch, powdery mildew, and rust will also suppress downy mildew. If downymildew occurs during a Cabrio application for these diseases, immediately follow the Cabrio application with anotherdowny mildew fungicide with a different mode of action.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.9 Ibpyraclostrobin (= 72 ozs Cabrio) per acre per season. DO NOT make more than one (1) application of Cabrio beforealternating to a labeled non-Group 11 fungicide with a different mode of action.

4*®Table 2. Cabrio EG fungicide Crop-specific Requirements (continued)

Crop

Bushberry andCaneberry subgroups

Bushberry subgroupAronia berryBlack currantBlueberry(highbush andlowbush)

Buffalo currantChilean guavaCurrantElderberryEuropean barberryGooseberryHighbush cranberryHoneysuckle, edibleHuckleberryJostaberryJuneberryLingonberryNative currantRed currantSalalSea buckthorn

Caneberry subgroupBlackberry(all varieties)LoganberryRaspberry(black and red)

Wild raspberry

Target Disease

Alternaria leaf spot andfruit rot(Alternaria spp.)

Anthracnose(Colletotrichum spp.,Elsinoe spp.)

Leaf spot and blotch(Mycosphaerella spp.,Septoria spp.)

Phomopsis leaf spot,twig blight, and fruit rot(Phomopsis spp.)

Powdery mildew(Sphaerotheca spp.,Microsphaera spp.,Oidium spp.)

Spur blight(Didymella spp.,Phoma spp.)

Suppression Only:


Monilinia blight(Monilinia spp.)

Rust(Puccianiastrum spp.,Arthuriomyces spp.,Phragmidium spp.,Kuehneola spp.)

Product UseRate per

Application(ozs/A)

14


Applications

2


56

(0 7 \h{ \J . 1 ItJ

ai/acre)

MinimumTime from


0

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7 to 14 dayinterval.

Use the shorter interval when disease pressure is high.


r®Table 2. Cabrio EG fungicide Crop-specific Requirements (continued)

Crop

Fruiting vegetablesgroup

African eggplantBush tomatoBell pepperCoconaCurrant tomatoEggplantGarden huckleberryGoji berryGroundcherryMartyniaNaranjillaOkraPea eggplantPepinoPepper (all varieties)Nonbell pepperRoselleScarlet eggplantSunberryTomatilloTomato*Tree tomatoCultivars, varietiesand/or hybrids of these

Target Disease


Black mold(Alternaria alternate)

Early blight(Alternaria solani)

Septoria leaf spot(Septoria lycopersici)

Target spot(Corynesporacassiicola)

Late blight(Phytophthorainfestans)


Suppression Only:


Rhizoctonia stem rot***(Rhizoctonia solani)

Sclerotinia stem rot***(Sclerotiniasclerotiorum)

Southern blight***(Sclerotium rolfsii)

Product UseRate per

Application(ozs/A)

8 to 12

or

8 to 12ozsper 1 00

gallons ofspray volume

(dilute)**

8 to 16

12 to 16


Applications

1 '


96

(1.2lbsai/acre)

MinimumTime from


0

*See the separate Crop-specific Requirements for tomato for the maximum number of sequential applicationspertaining to this use.

(continued)

r C «s8/Table 2. Cabrio® EG fungicide Crop-specific Requirements (continued)

Fruiting vegetables group, continued

Application Directions. Begin applications of Cabrio prior to disease development and continue on a 7- to 14-dayinterval for anthracnose, black mold, early blight, powdery mildew, Septoria leaf spot, and target spot. For control oflate blight, begin applications prior to disease development, then follow each application of Cabrio with a labeledfungicide with a different mode of action 5 to 7 days later. Use the higher rate and the shorter interval when diseasepressure is high.

**For applications based on dilute volume, spray plants to runoff. Apply a minimum of 20 gallons of spray volume peracre, and increase the spray volume as the plants grow during the season. Spray proportional volume to the amount ofplant tissue to be covered such that 100 gallons of spray per acre is used on mature plants.

Use of Adjuvants. The use of additives or adjuvants may improve the performance of Cabrio on fruiting vegetables.However, BASF evaluations also indicate that under some conditions (particularly high temperatures and/or highadditive rates), application of Cabrio in combination with certain rates of silicone-based or oil-containing (petroleum orcrop) additives or adjuvants can cause injury.

BASF has not tested all varieties and cultivars with all possible tank mix combinations and rates of additives oradjuvants. Local environmental conditions also influence crop tolerance and may not match those under which BASFhas conducted testing. Physical incompatibility, reduced disease control, or crop injury may result from mixing Cabriowith other products.

To the extent consistent with applicable law, the user assumes all risks associated with adding products to the Cabriospray solution. BASF cannot be held responsible for crop injury, reduced disease control or incompatibility due toadditives, adjuvants or other products used in combination with Cabrio. Refer also to the Conditions of Sale andWarranty section of this label.

To minimize the likelihood of crop injury, BASF recommends testing Cabrio in combination with other products for cropsafety on a small portion of the crop. However, environmental variability precludes direct and consistent projection ofsmall area test results to future use.

Consult a BASF representative for more information concerning additives or adjuvants.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 1.2 Ibs aipyraclostrobin (= 96 ozs Cabrio) per acre per crop growing season. DO NOT make more than one (1) application ofCabrio before alternating to a labeled non-Group 11 fungicide with a different mode of action.

In Tomato: DO NOT make more than two (2) applications of Cabrio before alternating to a labeled non-Group 11fungicide with a different mode of action. For additional resistance management information, refer to ResistanceManagement, in the Product Information section on the main label.

***Not registered for use in California.

®Table 2. Cabrio EG fungicide Crop-specific Requirements (continued)

Crop

Low growing berrysubgroup(except cranberry)

BearberryBilberryCloudberryIWIi intri£»QIVI Ul 1 LI ICO

PartridgeberryStrawberry

Target Disease




Suppression Only:


Product UseRate per

Application(ozs/A)

12 to 14


Applications

2


70

(0.87 '5 Ibai/acre)

MinimumTime from


0

Application Directions. Begin applications of Cabrio no later than bloom or prior to disease development andcontinue on a 7 to 14 day interval.


Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.875 Ib aipyraclostrobin (= 70 ozs Cabrio) per acre per season. DO NOT make more than two (2) sequential applications ofCabrio before alternating to a labeled non-Group 1 1 fungicide with a different mode of action.

f rTable 2. Cabrio EG fungicide Crop-specific Requirements (continued)

Crop

Pome fruit group

AppleAzaroleCrabappleLoquatMayhawMedlarPearPear, AsianPear, OrientalQuinceQuince, ChineseQuince, JapaneseTejocote


Target Disease

Alternaria blotch(Alternaria mail)

Apple scab(Venturia inaequalis)

Bitter rot(Colletotrichum spp.)

Black rot and Frogeye leafspot(Botryosphaeria obtusa)

Cedar apple rust(Gymnosporangium juniperi-virginianae)

Flyspeck(Zygophiala jamaicensis)

Pear scab(Venturia pirina)

Powdery mildew(Podosphaera leucotricha)

Quince rust(Gymnosporangium clavipes)

Sooty blotch(Fungal disease complex)

White rot(Botryosphaeria dothidea)

Product UseRate per

Application(ozs/A)

9 to 12


Applications

2


48

(O.Gibai/acre)

DO NOTmake more

than 4applicationsper season.

MinimumTime from


0

Application directions for scab, powdery mildew, rust and frogeye leaf spot. Begin applications of Cabrio prior todisease development and continue on a 7 to 10 day interval.

Use the shorter interval when disease pressure is high.

Application directions for sooty blotch, flyspeck, white rot, black rot, bitter rot, and Alternaria blotch. Beginapplications of Cabrio prior to disease development and continue on a 7 to 14 day interval. Use the shorter intervalwhen disease pressure is high.

No restriction on livestock grazing or feeding.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.6 Ib aipyraclostrobin (= 48 ozs Cabrio) per acre per season. DO NOT make more than four (4) applications of Cabrio orother Group 11 fung cides per season. DO NOT make more than two (2) sequential applications of Cabrio beforealternating to a labeled non-Group 11 fungicide with a different mode of action for at least one (1) application.

r rTable 2. Cabrio EG fungicide Crop-specific Requirements (continued)

Crop

Small fruit, vineclimbing subgroup(except fuzzy kiwifruit)

Amur river grapeGooseberryGrapes

Vitis vinifera androtundifolia(Muscadine varietiesonly)

Kiwifruit, hardyMaypopSchisandra berry

Target Disease



Black rot(Guignardia bidwellii)

Downy mildew(Plasmopara viticola)

Mycosphaerella leafhlinhtUll^l II


Phomopsis(Phomopsis viticola)



Suppression Only:


Product UseRate per

Application(ozs/A)

8 to 12


Applications

2


72

(0. 9 Ibai/acre)

MinimumTime from


14

Application Directions. For powdery mildew control, begin applications of Cabrio at pre-bloom on a 10 to 21 dayinterval. For black rot and downy mildew control, begin applications of Cabrio at pre-bloom on a 10 to 14 day interval.For all other diseases listed above, begin applications of Cabrio prior to disease development and continue on a 10 to14 day interval.


DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hoursexcept when performing cane tying, cane turning, or cane girdling. The REI is 5 days for treated grapes whenconducting cane tying, cane turning or cane girdling.

DO NOT use on Concord, Worden, Fredonia, or related varieties due to possible foliar injury.

Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 0.9 Ib aipyraclostrobin (= 72 ozs Cabrio) per acre per season. DO NOT make more than two (2) sequential applications ofCabrio before alternating to a labeled non-Group 1 1 fungicide with a different mode of action.

f^flConditions of Sale and Warranty

The Directions For Use of this product reflect theopinion of experts based on field use and tests. Thedirections are believed to be reliable and must befollowed carefully. However, it is impossible toeliminate all risks inherently associated with the use ofthis product. Crop injury, ineffectiveness or otherunintended consequences may result because of suchfactors as weather conditions, presence of othermaterials, or use of the product in a mannerinconsistent with its labeling, all of which are beyondthe control of BASF CORPORATION ("BASF") or theSeller. To the extent consistent with applicable law, allsuch risks shall be assumed by the Buyer.

BASF warrants that this product conforms to thechemical description on the label and is reasonably fitfor the purposes referred to in the Directions ForUse, subject to the inherent risks, referred to above.

TO THE EXTENT CONSISTENT WITH APPLICABLELAW, BASF MAKES NO OTHER EXPRESS ORIMPLIED WARRANTY OF FITNESS ORMERCHANTABILITY OR ANY OTHER EXPRESSOR IMPLIED WARRANTY.

TO THE EXTENT CONSISTENT WITH APPLICABLELAW, BUYER'S EXCLUSIVE REMEDY ANDBASF'S EXCLUSIVE LIABILITY, WHETHER INCONTRACT, TORT, NEGLIGENCE, STRICTLIABILITY, OR OTHERWISE, SHALL BE LIMITEDTO REPAYMENT OF THE PURCHASE PRICE OFTHE PRODUCT.

TO THE EXTENT CONSISTENT WITH APPLICABLELAW, BASF AND THE SELLER DISCLAIM ANYLIABILITY FOR CONSEQUENTIAL, EXEMPLARY,SPECIAL OR INDIRECT DAMAGES RESULTINGFROM THE USE OR HANDLING OF THISPRODUCT.

BASF and the Seller offer this product, and the Buyerand User accept it, subject to the foregoingConditions of Sale and Warranty which may bevaried only by agreement in writing signed by a dulyauthorized representative of BASF. nos

Cabrio is a registered trademark of BASF.

©2012 BASF CorporationAll rights reserved.

007969-00187.20120627d.NVA 2012-04-089-0133

BASF Corporation26 Davis Drive

Research Triangle Park, NC 27709

BASFThe Chemical Company

10

and pollution prevention - us epa › pesticides › chem_search › ppls › 007969-001… · and...

Documents