an adorable necklace with handmade charms
TRANSCRIPT
Beaded jewellery designs-an adorable necklace with
handmade charms
Instead of buying pre-made charms, why don’t you
make your own handmade charms? There are so
many reasons that you would want to do this. For
example, you can arrange the colors and beads into
beaded jewellery designs that you actually like or
you can even personalize one of your handmade
charms to suit a special occasion. As for myself, I
love the combination of crystalized glass beads and
pearl beads. All supplies used in the project cost just
fewer than 10 dollars to make. But the finished look
say will say anything but “budget”!
Supplies needed for the handmade charms:
6mm Abacus Bead
4mm Bicone Bead
3mm Acrylic Imitation-pearl bead
Crimp bead
Bead tips
Jumpring
Lobster Claw Clasp
Tiger Tail Wire
Chain
Side Cutting Plier
Flat nose plier(not shown in the picture)
Instructions on the beaded jewellery design:
: Cut a long strand of wire and then Step 1
string 8 pieces of 3mm pearl beads and
form a loop by passing the wire back
through the first one.
This new tutorial is all about beaded jewellery designs! You will learn how to turn inexpensive beads into
a special project, such as this handmade charm. Each step is detailed with photos and explanations.
: Take either of the two working ends (left Step 2
end here), and thread 3 bicone beads on it. Here we
did purple, blue and purple. Pass the end through
the bead below towards the left. Tighten the end
and this is one pattern in the 2nd layer.
For the other pattern, you need to thread on the
beads in this order: one purple bicone bead and one
6mm abacus bead. Next, weave the end through the
adjacent purple bicone bead as in pattern 1. At last,
exit the end at next pearl bead.
: Repeat beading the two bead pattern Step 3
alternately until you reach a complete circle.
: Pick up the other working end and Step 4
thread a purple bead and then add on 6 pearl
beads. Weave though the abacus bead to so
that the pearls beads surround it. Next, lead the
wire to the adjoining purple bicone bead and do
same process to the abacus bead.
Keep working until finish all 4 abacus beads.
Exit the two ends of wire between the 3rd and
4th pearl beads of a loop. Then string the
wires through a bead tips and a crimp bead.
Make a knot over the crimp bead. Squeeze
the crimp bead and then close the bead tips.
Remove all leftover wire.
: Add the chain through the bead tips loop Step 5
This beaded jewellery design is finished! Even
though the process is elaborate, I hope you will love
it. If you would like learn more patterns for making
handmade charms, just stay tuned. We have more
coming your way in the following weeks and months.
Thanks for your stopping by!
Shops for different kinds of beads please click:
http://www.pandahall.com/