an accurate device for parallel drilling, thread-cutting
TRANSCRIPT
20
Design Patent
000883806
All rights by PROXXON
An accurate device for parallel drilling, thread-cutting and
milling. Made in high-precision aluminium die-casting.
BV 2000 drilling device
With two-way pivotable articulated arm and 20mm standard
collar.
Once the device is clamped, it can be guided very precisely both sideways and vertically across the entire working area. It always remains vertically aligned. This means that, e.g. drill holes are always exactly perpendicular to the work piece surface! Preselec-table drill depth using depth control with easy-to-read scale. After drilling, an adjustable spring automatically pulls the device back into its top rest position. Flat-milled, solid base plate with 200 x 200mm usable table area and two continuous T-slots. Stable drill column (Ø 45mm, 500mm long).The standard 20mm collar enables the precise clamping of the drilling devices, such as the precision drill/grinder FBS 240/E, pro-fessional drill/grinder IB/E, long-neck straight drill/grinder LB/E, MICROMOT 50, 50/E and 50/EF.
NO 20 002
Protective device for hand-operated MICROMOT
machines with standard 20mm collar
For work with saw blades, cutting discs, milling bits, grinding tools, steel brushes and polishing tools. Maximum useable tool diameter 22mm. Easy to assemble.
NO 28 944
Note: Professional drill/grinder IB/E and step clamps are not included in the package.
Precision parallel limit stop. Adjustable, for different chamfering widths and depths.
Edge milling attachment KAVO
For all machines with MICROMOT standard
20mm collar.
For chamfering and bevelling inside and outside edges of wood, plastic and metal work pieces. Also suited for glass and ceramics when using sui-table accessories.A 20mm flange on the KAVO enables stationary use in conjunction with the universal holder UHZ. Cylindrical milling bits up to a maximum 10mm diameter can be used in the central position (45°). The angle can be adjusted on both sides by 15°. For bevels from 30° to 60°.Differently shaped milling bits can also manufac-ture round edges, hollow edges, chamfers for seals (example: ball-milling bit for O-ring seals).
For hand-held MICROMOT machines with 20mm standard collar, such as the precision drill/grinder FBS 240/E, professional drill/grinder IB/E, long-neck straight drill/grinder LB/E, MICROMOT 50, 50/E and 50/EF.
NO 28 612
The parallel limit stop is removed when working on round or curved work pieces. The remaining cylinder
is used as limit stop.
21
Selected sets for various application in
industrial and dental quality.
Holder for bits and cutters
For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diame-ters of 2.35 - 3.2mm. Without bits and cutters.
NO 28 359 2 pieces
For all prepared MICROMOT devices. Advanta-geous when working with different shafts. Capa-city 0.3 - 3.2mm.NO 28 941
Triple slit and hardened. 1 each of 1.0 – 1.5 – 2.0 – 2.4, – 3.0 and 3.2mm. With clamping nut and holder for storage (see note at left).NO 28 940
MICROMOT steel collet set Three-jaw steel drill chuck
Holders for bits and cuttersGlass working Complete polishing set
13-piece set for model makers.
For cutting, grading, milling, polishing and drilling. 1 fine milling bit each of 2.3mm ball shape and cylinder shape. One white corundum grinding bit each of 5.0mm ball shape and cone shape. One micro drill each of 1.0mm and 2.3mm. 5 separating discs ø 22mm. One ø 22mm saw blade and ø 2.35mm arbor.NO 28 910
10-piece complete polishing set
For polishing metal, glass, precious metals, porcelain and plastic. Consisting of 3 felt polishing bits (cylinder, cone and wheel shapes), 3 silicon polishing bits (bullet, cylinder and disc shape), cotton polishing disc, chamois buffing wheel and polishing paste. Includes 2.35 x 44mm arbor. NO 28 285
4-piece glass working set. 2 diamond grinding bits and 2 silicon carbide grinding bits. For engraving, grinding or frosting glass. Diamond bit 1: ball ø 1.0mm, diamond bit 2: ball ø 1.8mm, silicon carbide bit cone 3/2 x 5mm, and bullet 2/2.5 x 7mm. All shafts ø 2.35mm. NO 28 920
Modeller‘s set
Unrivalled for sculpting, cleaning and smoothing wood and fibre glass.
Extremely sharp and easy to handle: The material can be removed with control and without physical effort. High stability and easy to clean with a Bunsen burner. Also for use on rubber, foam and silicone. Rpm range: 5.000 – 20,000. Shafts ø 3.2mm. Not for use on metal !
Ball nose cylinder 7,5 x 12 mm NO 29 060
Cone 8 x 12mm NO 29 062
Taper 4 x 19mm NO 29 064
Rasp cutter with wolfram carbide burrs
Note:
Ideal for wood cutters: a rasp disc made of the same material in combination with the MICROMOT long neck angle grinder LWS. See page 6.
Drill chuck or
collet?
Drill chucks provide more con-
venience to quickly change the
tools when working with shafts of
varying diameters (e.g. HSS drills
as per DIN 338). However, because
of their technical setup, they have
a few drawbacks compared to
collets: Less clamping force and
higher concentricity tolerances. If
high precision is necessary, then
working with MICROMOT steel
collets is a must (also refer to the
note on page 4).
22
3,0
10,03,0
3,0
3
1,0 1,5 2,01,0 u. 1,2 0,6 u. 0,8
38 3830 30
388 8 83
5,0
2,32,32,32,3
5,0
2,35
2,5 6,07,0 5,02,5
2,35
7,0 6,0 5,0
9,0 138,0
13
3,0
2,0
7
2,5
0,5
44
0,8
4466
1,
8
8,0
2,352,35
5,05,0
2,35
5,04,0
2,35
6,0
2,35
6,0
6,0
NO 28 722 NO 28 727 NO 28 725 NO 28 724 NO 28 723 NO 28 726 NO 28 720
Wolfram vanadium steel milling bits Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and opthand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, roufitting of the milling bits we recommend the use of MICROMOT steel collets as described above.
Bits and cutters for MICROMOT drills and mills of industrial and dental qua
NO 28 324 NO 28 326 NO 28 328
Tungsten carbide drills Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
NO 28 750
Tungsten carbide millers
Made of wear-resistant highly well, avoiding accidents. For ing of PC cards. Shafts Ø 3.0
NO 28 320 NO 28 321
Tungsten carbide milling drills (spear drills)
For drilling, milling and cutting fibre glass or PER-TINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
NO 28 774 NO 28 778 NO 28 776 NO 28 772 NO 28 781 NO 28 782 NO 28 783
High quality corundum grinding bits. Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity. Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
NO 28 270
Silicon carbide
frosting of glassiron and other h
5 p. 5 p. 5 p. 5 p. 3 p.
NO 28 864 NO 28 852 NO
HSS drill bits Selected steel quality. Purpose-madfactured from a one-piece blank. High hardness for metals, plastic, PC cards and wood. Work speeds: sshanks 2.35mm.
The specified rotational speeds are approximate values for spiral drills made of HSS and tungsten carbide. They must be appropriate for the material of the workpiece. The use of coolant is recommended for aluminium, brass, steel and stainless steel. Plastic can be cooled with compressed air to prevent the drilling chips from fusing. The hardness of derived timber products varies distinctly, therefore only an approximate value can be specified. The harder the wood, the lower the rotational speed !
HSS drill bits
Milling bits
Tungsten carbide drills and milling bits
Grinding bits
3 p.3 p.
Rotational speed for spiral drills of HSS and tungsten carbide in rpm
Drill Wood Aluminium Brass Steel Stainless Steel Plastics
Ø HSS TC HSS TC HSS TC HSS TC HSS TC HSS TC
0,5 20000 23000 35000 60000 25000 40000 15000 30000 9000 22000 19000 33000
1,0 12000 17000 22000 45000 15000 25000 8000 18000 5000 10000 11000 20000
1,5 9000 12000 14000 30000 10000 15000 5500 13000 3500 9000 8000 15000
2,0 7000 9000 11000 23000 8000 12000 4000 9000 3000 8000 6000 10000
2,5 6000 7000 9000 19000 6000 10000 3500 7500 2500 7000 5000 8000
3,0 5000 6000 7500 15000 5000 8000 3000 6500 2000 6000 4000 7000
3,5 4000 5000 6000 13000 4500 7000 2500 5500 1500 4500 3500 6000
4,0 3000 4500 5500 10000 4000 6000 2000 4500 1000 3000 3000 5000
23
2,32,31,2
4,0
1,2
2,12,1
2,35
l 2
l 1
d 1
44
6
3,0
1,0
l 2
l 1
d 1
44
12
3,0
2,0
l 2
l 1
d 1
44
12
3,0
3,0
5,05,0
3,2
8,08,0
5
2,5
22
3
22
3 44
d 1
28
3,0
50
3,2
22
50
2,35
0
44
1,2
448
1,6
4410l 1
l 2
d 1
2,3
2,35
2,32,33,12,3
0,8 u. 1,2
445
5,0 d 1 d 15,0 1,0 1,81,8
5,0
1,8
5,0
4,0
NO 28 710
imal concentricity ensure best life expectancy. Ideal for free-uting, shaping, profiling and slotting. For clean and powerful
ality.
NO 28 876
HSS twist drill set with centring pin ø 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0 mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft ø 3mm, 6-piece set.
NO 28 752 NO 28 758 NO 28 759 NO 28 761 NO 28 760
compressed fine-granular tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secure workpieces milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical work, for engraving and mill- or 2.35mm. Here also we recommend the use of MICROMOT steel collets.
NO 28 757
Rasp cutter
For cutting and milling tiles, stoneware, wood and plastics. Spare cutter for FEX.
NO 28 272
grinding bits Fine particles of consistent hardness for engraving and s, ceramics and stellites. Also for grinding tungsten carbide, chilled cast ard steel alloys. Shafts Ø 2.35mm.
NO 28 815
Spare arbors
Shaft 2.35 x 44mm.
NO 28 302 NO 28 304
High quality corundum and silicon carbide grinding wheels
Wheels for free-hand and stationary grinding, sharpening, de-burring and smoothening of various metals and materials.
Note:
All measures are in mm.
1 p. 1 p. 1 p. 1 p. 1 p.
10 p. 10 p. 5 p.
28 854 NO 28 856 NO 28 858
e stable construction with high concentricity. Shaft and bit are manu-optimum life expectancy and elasticity. For drilling metal, non-ferrous soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø
NO 28 874
HSS twist drill set to DIN 338 One each of 0.3-0.5-0.8-1.0-1.2-1.5-2.0-2.5-3.0-3.2mm diameter. For drilling non-ferrous metals, steel, high-quality steel. 10 pieces.
NO 28 255
Diamond twist drills
For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.
NO 28 240 NO 28 250 NO 28 212 NO 28 222
Diamond grinding bits With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diamond tools
24
22
1,81,8
22 22
1,81,8
2238
1,8
38
1,8
38
1,8
ø 18 ø 18
13
9 9
13 10
10
3
1388 2213
22 14
123
22
6
1522
5
22
Selected cutting, sanding and polishing bits for professional use and longe
5 p. grit 1205 p. grit 150
10 p. grit 12010 p. grit 150
5 p. grit 805 p. grit 150
5 p. grit 805 p. grit 150
10 p.
grit 150
Sanding
10 p.5 p.10 p. 50 p.
Cutting discs
50 p.
NO 28 810 NO 28 812 NO 28 820
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35mm.
NO 28 808 NO 28 809
Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mmWill cut alloyed, standard and stainless steels, non-ferrous metal
NO 28 982 NO 28 983 NO 28 987 NO 28 989 NO 28 980
Sanding discs, caps and bands are made of standard corundum. The sanding compounds have a tough consistency and different grits for preliminary and refinishing work. Epolishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. Adapt the rotational speed tobands and caps can also be used for refinishing radii and grooves. Shaft ø 3.0.
5 p. 4 p.10 p.10 p.
Fine polishing
NO 28 293 NO 28 294 NO 28 288
Flexible silicon discs, wheels and bullets
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
NO 28 295 NO 28 296
Flexible polishing pad set Especially suitable for working gold, platinum, silver as well as for tool making and castings. Shafts of Ø 2.35mm.
2 p. 2 p. 5 p.5 p.2 p.2 p.
NO 28 951 NO 28 953 NO 28 952
Steel brushes, cups and wheels High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
NO 28 961 NO 28 963 NO 28 962
Brass brushes, cups and wheels Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Cleaning, polishing
25
2038 3838
1,8
38
1,8
38
1,8
10
1013
14
13
1420 20 20
10
30
10
20
16
3
7
15
8
15
22 22 22 22
16
19
221,8
1,8
1,88 2213
est life expectancy ! Note:
All measures are in mm.
10 p.
grit 15010 p.
grit 12010 p.
grit 120grit 120 grit 120
2 p. 2 p. 2 p.
Cutting ceramics
5 p.
NO 28 818
m. Nearly unbreakable, making them usable to remove stock. s and even wood and plastic. Arbor shaft of Ø 2.35mm.
NO 28 981 NO 28 978 NO 28 979
xtreme toughness. Different versions for different application areas. For sanding, smoothing and o the material to be sanded. Steel high, wood medium and plastic low rotational speed. Sanding
NO 28 297 NO 28 298 NO 28 299
Cotton, chamois and felt polishers
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste. Also for reconditioning painted woods and pla-stics. Shaft Ø 2.35.
NO 28 292
Polishing paste
Absolutely essential for polishing metal and plastic.
Cutting wood
NO 28 830
Cutting blades made of spring steel
0.1mm thick. For plastic, wood and non-ferrous metal. Shaft Ø 2.35. For free-hand work, we recommend using the protective device 28 944 on page 20.
NO 28 840 NO 28 842
Diamond cutting discs
Only 0.6mm thick. For cutting and sanding of por-celain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
NO 28 844 NO 28 846
Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same applica-tion as described on the left. Less heating up due to cooling holes. No burn marks! Shaft ø 2.35.
NO 28 282
Nylon fleece brushes for cleaning, frosting and sanding steel, stainless steel, non-fer-rous metals, etc. Shaft ø 2.35.
NO 28 984 NO 28 985
Flapwheels of standard corundum are elastic and adapt to the contours of the work piece being processed. For machi-ning inaccessible spots. Shaft ø 3.0.
2 p. 10 p.
NO 28 801 NO 28 802 NO 28 803 NO 28 798
Felt polishers and felt discs.
For preliminary and high burnish polishing of metal, gold, silver, brass and alumini-um with the use of polishing paste. Also for final polishing in mould and die-making. Shaft Ø 2.35. Work with a lower rotational speed when polishing. Soften hard poli-shing paste with oil or heat up lightly.
High polishing
5 p.2 p.2 p.
NO 28 955 NO 28 957 NO 28 956
Stainless steel brushes, cups and wheels For cleaning, brushing and cleansing stainless steel. Remove cinders and scales on stainless steel welding seams and sol-dering points. Can also be used on aluminium and non-ferrous heavy metal. Shaft Ø 2.35.
2 p. 2 p.
Note:
Permit the brushes to work only with gentle contact pressure and at the recommended rotational speed! If the pressure is too high, the individual wires will be bent too strongly and afterwards straighten up again due to the centrifugal force. This excessive flexural fatigue stress of the wires on their seating promotes the notch effect. They are prone to breakage !
26
VOLT12
Design Patent
DM 073123
All rights by PROXXON
Design Patent
001076285
All rights by PROXXON
Soldering iron LG 12
With thermostat for precisely set 250°C. Therefore ideal for sol-
dering electronic components. Lightweight and handy. Short heating time. Switch with latch. Sol-dering point lighting for adequate views even in casings and diffi-cult-to-access areas. Replaceable soldering tip (available in stores). With spiral cable and standard MICROMOT jack plug for connection to all MICROMOT mains adapters (min. 1.0A).
Technical Data:
12 – 18V. 1.0A. Constant soldering tip temperature of 250°C.
NO 28 140
For shrinking sleeves (many devices available on the market are
simply too large) and 1000 kinds of other applications.
MICROFLAME burner MFB/E
Used for soldering, de-soldering, brazing, heating of workpieces,
tinning.
Individually controllable gas and air supply. Super fine flame shape with temperature attaining 1,200 °C. Ideal for precision work. Fitted with an electronic piezo crystal lighter.
The tank contents of 50ml is sufficient for approximately 60 minutes opera-tion with normal flame. Rechargeable with standard butane cartridges used for lighters.NO 28 146
Replacement soldering tip For LG 12. Easy to replace by loosening the clamping screw.NO 28 141
MICRO Heat gun MH 550
Small, robust and powerful. Complete with 3 additional
nozzles.
For shrinking sleeves, shaping and welding plastics, solde-ring and de-soldering of electronic components. For remo-ving layers of paint and varnish without aggressive chemi-cals (pickling agents). For drying and accelerating curing processes (adhesives, paints). For applying and removing films (stickers). For browning wood.
Housing of glass fibre reinforced POLYAMIDE with soft com-ponents in the grip area and footprints for stationary use. A powerful heating element ensures a consistent temperature in 2 stages with an air flow of approx. 180l/min. Installed thermostat as security against overheating. Main nozzle and spare nozzles of rust-proof steel.
Technical Data:
220 – 240V. 500W. Air temperature in Stage 1: 350°C. Stage 2: 550°C. Air volume approx. 180l/min. Weight approx. 500g.
NO 27 130
27
Precision screwdriver for electronic engineers, camera builders,
watchmakers, jewellers, precision engineers and model makers.
Shafts of high alloy nickel-chrome-molybdenum (SAE 8660) for maximum hardness and tough-ness. Chromed with brinelled tip. The ergonomically formed plastic handles are oil and impact resistant. The revolving top and finger mould improve ease of use.
NO 28 148 15 pieces in a stand
Slot: 1.0 x 40, 2.0 x 40, 3.0 x 40
Philips: PH 0-3 x 40, PH 0 x 40, PH 1-2 x 40
Torx: T 5 x 40, T 6 x 40, T 8 x 40, T 10 x 40, T 15 x 40
Allan-key: 1.5 x 40, 2.0 x 40, 2.5 x 40, 3.0 x 40
Note:
It is important to use the MICRO screwdrivers with care and feel. The brute force associated with larger screwdri-vers is best left for other tools. The revolving top and finger mould improve ease of use.
Quick and reliable gluing of metal, wood, plastic (including Plexiglass), glass, ceramics, stoneware, cardboard, leather, polystyrene foams and tex-tiles. Depending on the material and on the adhesive quantity applied, the adhesive sets after about 30 seconds, allowing positional cor-rections within this period of time
(impossible with instant glues).The 7mm glue sticks are perfect for delicate work such as model building, toy and jewellery making, dried flower arrangements, etc. Sensitive mechanical feed ensures correct glue quantity delivery. Integral stand positions gun on worktop when not in use. Short heating time. Technical data: 220 – 240V. PTC controlled element for exact temperature of 200 °C. Four glue sticks 7 x 100mm and 3 interchangeable metal nozzles are included in the set.
NO 28 192
MICROMOT glue gun HKP 220
Including 3 interchangeable metal nozzles.Replacement glue sticks for HKP 220
For metal, wood, plastic, ceramics, cardboard, leather, polystyrene foams and textiles. Ø 7mm. Length 100mm. Colourless.NO 28 194 12 pieces
Fixed place for each item in the practical holder. May be used as desktop stand or fixed to a wall.
MICRO-screwdrivers
28
VOLT12
For free modelling in Styrofoam.
No „crumbling“ as found when working with traditional tools.
Hot wire cutter THERMOCUT 12/E
Other application areas:
Architecture modelling, prototype construction, for designers, decorators, or for fine work on construction insulation. And of course for classical model building.
Stable frame with pivotable fixing element at top and extendable lower wire fixing. Maximum total extension 200mm. Maximum work piece height 150mm.Cutting wire temperature infinitely variable. With a little practice, you can achieve optimum cuts depending on the material density and thickness. Usu-ally at medium temperatures and without too much pressure. Heat-up time 1 second. Complete with five deformable cutting wires 285 x 0.85mm. For suitable mains adapter see page 17.
Technical data:
12V. 60W. 50/60Hz. Cutting wire temperature controllable from approx. 150 - 350 °C. We recommend MICROMOT mains adapters as of a capacity of 2.0A for operation.NO 27 082
Replacement cutting wire
For the THERMOCUT 12/E. Easy to bend, therefore ideal for modelling.NO 28 082 10 pieces
Note:
Styrofoam is an inexpensive material and very environmentally friendly as
compared to other materials; it can be easily cut through with a hot wire. This material is sold in standard sheet sizes
of 50 x 100cm and thicknesses of 2 to 16cm at almost all DIY centres
and hardware stores.
Cutting wires (285 x 0.85mm) can be shaped by hand or tongs to manufacture any profile.
Extendable wire fixing for maximum extension of 200mm.
Cutting temperatureinfinitely variable.
Polarity-protected system plug for MICROMOT mains adapters.
Pivotable fixing element at top.
Also for cutting free in thick Styrofoam sheets for Diorama model railway construction. For the manufacture of any profile.
Note:
With a bit of practice, creating landscapes even for finished railroads
and streets is easy. It is also no problem to make corrections
to model landscapes.
29
Used to cut styrofoam and thermoplastic materials,
both freehand and with stencils.
Hot wire cutter THERMOCUT 230/E
Note:
The unit‘s double wound transformer and insulation to class 2 ensure the cutter is absolutely safe. The cutting wire operates at 10V, 1A.
The large base with 390 x 280mm table with surface of aluminium cobond compound ensures smooth and easy movement of the workpiece. The printed grid and protractor ease division and cutting. The solid aluminium overarm has a 350mm throat and offers 140mm capacity in height. The holder and wire coil (30m, 0.2mm diameter is included) may be shifted along the overarm to enable mitre cutting. A LED indicates operation and prevents burnt fingers (the cutting wire heats to maximum in less than 1 second).
Note:
The correct temperature, being material type and thickness dependent, is easily learnt. Optimum profiles are cut at lower temperatures and cutting force.
Other technical data:
220 – 240V, 50/60Hz. Transformer secondary max. 10V, 1A. Cutting wire temperature with 0.2mm diameter is variable between approx. 100 and 200 °C. Weight approx. 3kg. Insulated to class 2 requirements.NO 27 080
Spare cutting wireUsed on the THERMOCUT 230/E and other similar units. Made of NiCr 8020. Spool of 30m x 0.2mm.NO 28 080
Ideal for architectural models, designers, decorators, artists, teaching too, prototypes aswell as classical railroad, plane and boat model building.
Crosscuts are achieved by means of a simple yet efficient solution: secure drawing-pin to table by
means of tape, it serves as a fixed centre.
Double function fence with lockable feed bar(German Patent 100 00 102.5).
The working surface is of aluminium cobond compound. This eases the pushing of work pieces. A printed grid and protractor are applied to the base.
Note:
You will find the right temperature (depending on material and thickness) with a
bit of instinct and practice. The optimum cut is usually achieved at medium temperatures and
without too much pressure.
30
Technical data:
Centre distance of 250mm, 40mm swing. 25mm swing over support. Motor 220 – 240V, 100W, 50/60Hz. Variable speed control covering between 1,000 and 5,000rpm. Headstock spindle bore of 10mm. Tailstock travel 20mm.Includes 6 collets (2 – 3 – 4 – 6 – 8 – 10mm), drive centre, live centre and face plate.NO 27 020
Centre distance 250mm and 40mm swing.
Variable speed control covering 1,000 – 5,000rpm.
MICRO woodturning lathe DB 250
Turning in miniature is a pleasing hobby. One canmake glasses, cups, saucers, vases and columns for adoll house. In model trains, one can make lighting
masts, windows, tanks. Limbs for marionettes and hundreds of classical miniature turning tasks may be carried out with ease.
Work pieces are secured by meansof collets (1 each of 2 – 3 – 4 – 6 - 8 and
10mm are included).
The bed is made from stable, thick-walled aluminium profile.
The stable tool rest is adjustable in all directions.
Tailstock with quill travel.
Powerful drive motor with speed control between 1,000 and 5,000rpm.
Ball bearing spindle is bored through at 10mm.
For series production of small parts.
Square carrier with back centre and 10mm shaft.
Five piece HSS chisel setA high quality set with the most frequently used turning tools: gouge, skew, parting tool, beading tool and scraper. Neatly packed in a wooden box.
NO 27 023
Independent four jaw chuck for the DB 250With individually adjustable jaws. Used to clamp asymme-trical pieces such as rectangles. The reversible jaws clamp from 1.5 – 35mm (inside) and from 14 - 67mm (outside). The DB 250 headstock spindle of thread M16 x 1 screws directly into the chuck. NO 27 024
Three jaw chuck for the lathe DB 250Used for concentric clamping. Made from steel and offering 1.5 to 32mm and 12 to 65mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 headstock spindle. NO 27 026
A face plate for turning larger items is included.
Drill chuck with sliding sleeve for the tail-
stock of the DB 250Clamps up to 5.0mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.NO 27 028
The electronic speed control assists in the lower range in a ‘semi-auto-mated’ painting process.
31
Design Patent
DM /075534
All rights by PROXXON
1 1098765432
1
5
4
3
2
6
10
9
8
7
10-piece wood router cutter set
1 piece each of the cutters offered here. Neatly packed in wooden box.
NO 29 020
For routing wood and shaping specialist plastics.
MICRO shaper MP 300
Powerful dust-protected motor with toothed belt drive. Double ball-bearing spindle. Tool holder with triple slitted precision collets (includes 3 pieces for 2.4 - 3.0 and 3.2mm).Milling cutter height adjustment by hand wheel and scale ring adjustable to 0 (1 revolution = 1.0, 1 graduation line = 0.05mm). Stable aluminium table with longitudinal and angle stop as well as cutter guard and hold-down. Housing of ABS. Adapter for vacuum cleaner fits standard household vacuum cleaners.
For cutting hard wood, fibreboard and plastic. Clean relief grinding for good work results and surface quality. High stability. For manu-facturing slots, sections, radii and other profiles. For crafting picture frames. Shafts 3.2mm.
Technical data:
220 – 240V. 100W. 50/60Hz. 25,000rpm. Cutting table 300 x 150mm, Weight approx. 2.0kg.
NO 27 050
For profiling, slotting, milling, chamfering, trimming and separating. Also enables precise machining of sides and long
sections (for model building, e.g. for doors, flaps and housing parts).
Attention: The wood router cutters offered here may only be used with wor-king devices that have a safety mechanism. For example, MICRO router MOF (page 11) or MICRO shaper MP 300.
Tungsten carbide wood router cutters
The MP 300 is fitted with a dust collec-tion channel and vacuum adapter.
slot cutter ø 3.2mm NO 29 024
slot cutter ø 5.0mm NO 29 026
slot cutter ø 6.5mm NO 29 028
Rounding over cutter ø 6.4mm NO 29 030
V-slot cutter ø 6.5mm NO 29 032
Combi cutter 6.5/2.5mm NO 29 034
Core box bit R 3.2mm NO 29 036 Rebating cutter 6.4mm NO 29 038 Edge cutter with pin 5.0mm NO 29 040 Half round cutter ø 13mm NO 29 042
32
Solid carbide saw blade
50mm diameter (10mm bore). 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other ‘difficult’ materials. NO 28 011
Saw blade made of high-alloy special steel. 50mm diameter (10mm bore). Alloy holding a high proportion of tungsten, vana-dium and molybdenum for an even structure, high hard-ness and long lifetime. Fine-toothed. For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for cutting compound materials like PC cards, and sawing wood and plastics.
NO 28 020
Tungsten tipped saw blades
50mm Ø x 1.1mm (10mm bore). 10 teeth. Used to cut hard and soft woods, PC cards, PERTINAX and aluminium.NO 28 016
50mm Ø x 1.1mm (10mm bore). 20 teeth. For extreme-ly clean cuts of balsa, plywood. Can also be used for cutting PC cards and POLYCARBONATE.NO 28 017
For perfect straight cuts in wood, non-ferrous metals,
plastic and PC cards.
Bench circular saw KS 230
Machined, die-cast aluminium table of 160 x 160mm.
‘Super-Cut‘ blade 58mm dia-meter, 80 teeth, individually set
and sharpened, is included.
Motor: low noise and persevering for prolonged use.
Base of ABS with a sawdust door on the right.
Adjustable fence with scale.
The ‘Super-Cut‘ saw blade (Ø 58mm) cuts soft wood up to a
thickness of 8mm.
Low noise and persevering AC motor with high life expectancy. Power transmission by toothed belt ensures the right blade speed for the job with approx. a doubling of torque. Cutting performance in wood up to 8mm, plastics (also PERTINAX printed circuit boards) up to approx. 3mm, non-ferrous metals up to approx. 1.5mm. Even fibreglass reinforced PC cards can be cut by using a carbi-de saw blade. Adjustable mitre fence with scale. Angle stop with degree graduation. Flat-milled worktop of die-cast aluminium (160 x 160mm).Technical Data:
220 – 240V. 85 W. 5,000rpm. Weight approx 1.8kg.
NO 27 006
Note:
You will find the larger version of the circular saw KS 230 (type FET) on page 42.
Very important when sawing: use our vacuum cleaner adapter for a cleaner work environment.
Diamond blade. 50mm diameter (10mm bore). With 0.5mm layer of class ´D107´ diamond for cutting ceramics, porcelain, tiles, stone as well as PC cards. NO 28 012
Crosscut ‘Super-Cut’ blade 58mm diameter (10mm bore). 80 alternately set teeth. Ideal for hard and soft wood as well as plastic and Pertinax. For fast, clean cuts. Teeth are individually set and sharpened. Superior cutting power! NO 28 014
Graduated mitre stop.
33
‘Super-Cut‘ scroll saw blades. High quality steel for extended use
and prolonged cutting capacity. Standard version without pin.
Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Coarse-toothed blades (14 teeth per 25mm): NO 28 110 130 x 1.50 x 0.48mm 6 pieces
Standard-toothed blades (17 teeth per 25mm):NO 28 108 130 x 1.20 x 0.38mm 6 pieces
Fine-toothed blades (25 teeth per 25mm): NO 28 107 130 x 0,77 x 0.30mm 6 pieces
Hard materials such as steel and PERTINAX.
Fine-toothed blades (28 teeth per 25mm): NO 28 104 130 x 1.10 x 0.50mm 6 pieces
Very fine-toothed blades (41 teeth per 25mm): NO 28 106 130 x 0.74 x 0.36mm 6 pieces
The ideal machine for the delicate job: model building, toy making
and precision mechanics. With electronic speed control.
Cuts soft wood up to 40mm, hard wood up to approx. 10mm, pla-stic (including PC cards) up to approx. 4mm and non-ferrous metals up to 2mm. Very stable ribbed die-cast aluminium saw frame with 300mm throat. Blade guide with integrated blower. Height adjusta-ble head (3 positions) offering two advantages:– Blade usage is improved as the head may be
lowered in two steps, making new blade teeth available. This effectively triples blade life.
– The lowest head position still allows blades, shortened by 60mm, to be used.
Low noise and persevering AC motor with high life expectancy. Quiet and wear-resistant drive via
toothed belts. Adjustable mitre fence and angle stop with scale. Includes 5 saw blades (3 coarse-toothed and 2 fine-toothed).Technical Data:220 – 240V. 85W. Electronically controllable stroke rate from 150 - 2,500rpm. Weight approx 2kg.
NO 27 088
Cuts aluminium, wood, PC cards and plastics with standard scroll saw
blades. With electronically controllable stroke rate.
Scroll saw DS 230/E
Note:
You will find our larger scroll saw models DS 460 and DSH on pages 46 and 47.
Use the vacuum cleaner adapter to keep your work area cleaner.
Adjustable head (patent EP 09783341) offersmany advantages (see below).
34
Accurately cuts small items of metal, wood and plastic.Table moveable through 45°, allowing mitre cuts. Workpiece is fastened tightly and accu-rately by means of the integrated clamping device. Clamp jaws 27mm wide and maximum workpiece diameter 20mm. Depth of cut to 13mm. A special slot is provided to clamp HO model tracks. The fence accepts lengths up to 140mm. Five ceramic cutting discs 50 x 1.0 x 10mm are also included suitable for cutting steel, non-ferrous metals as well as wooden or plastic rods.Technical Data: 220 – 240V. 85W. 50/60Hz. Peripheral speed 20m/sec. Weight approx. 1.5kg. NO 27 150
Replacement cutting discsMade of ceramic compound: 50% aluminium oxide and 50% silicon carbide. Suitable for cutting steel, non-ferrous metal as well as small wood and ceramic bars.NO 28 152
Cut off saw KG 50
Note:
You will find the larger version of the KG 50, our Cut off/mitre saw KGS 80, on page 45 !
Polishing set Steel wire brush for de-rusting and clean-ing steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.NO 28 312 Complete set
Spare discs for the SP/E and BSG 220 (50 x 13mm)
Corundum (grade N) with 12.7mm boreNO 28 308
Silicon carbide with 12.7mm bore. Soft compound for very hard materials. NO 28 310
For 50mm discs and brushes.
With electronic speed control from 8 to 24m/sec.
The slim housing facilitates the grinding of long workpieces and
includes an adapter to connect a vacuum cleaner to the unit.
The tool rests and eye guards are both adjustable. A spindle lock eases the changing of wheels and discs. Supplied with a 50 x 13mm corundum (grade N) and silicon carbide (soft compound) wheel for general grinding/sharpening and hard materials respectively.
The right hand spindle accepts the polishing arbor, which is supplied as standard equipment.
Technical data:
220 - 240V. 3,000 - 9,000rpm. Wheels 50 x 13 x 12.7mm. Grinding speed 8 - 24m/sec. Weight approx. 1,200g.
Size approx. 250 x 130 x 100mm. NO 28 030
The dust collector and vacuum cleaner adapter can be used.
Grinding and polishing machine SP/E
35
The sharpening operation is controlled exactly by means of the
movable carriage.
This moves from left to right and also rotates the drill bit on its own axis. This operation yields the cor-rect relief angle. The carriage is fit-ted with a feed screw for fine feed. A dressing stone, ensuring a sharp cutting surface, is also fitted.
Other technical data:
Corundum grinding disc size 50 x 13mm. 220 – 240V, 85W. ABS hou-sing with fixing holes. Weight 1.7kg. An easy to understand opera-ting manual and replacement disc accompany the unit. For further spare discs see page 34.
NO 21 200
Easy sharpening of drill bits from 3 to 13mm diameter,
standard angle of 118°.
Adapters for sharpening of small drill bits
These adapters extend the BSG 220’s range to cover 1.5 - 3mm. One each adapter for sizes 1.5 – 1.6 – 2.0 – 2.4 – 2.5 and 3.0mm. Neatly packed in a wooden box with sliding lid.
NO 21 232
Note:
The PROXXON Drill Sharpener comes complete with full instructions to ensure even a novice can sharpen drill bits. These instructions will help to get good results every time.
Drill sharpener BSG 220
A practical product combination for model builders, for working
with templates, and for technical illustrations. Low-noise running. With 200cm air hose for connection to the air-brush AB 100. This has a single-action function and an adjustable nozzle which makes it easy to operate even for beginners. Two paint containers are included.
MICRO compressor MK 240. Complete with airbrush AB 100.
Technical data of the compressor:
220 – 240V. 85W. Air flow rate 12l/min. Air pressure max. 2.0bar. Size 140 x 120 x 95mm. Weight 1,300g. Only suitable for airbrush work !
NO 27 120
Note:
This set-up is only suitable for airbrush work! Only watercolours, graining colours, pigment colours and temperas can be processed (no oil paints, synthetic resin paints or other paints that need to be thinned with solvents).
Dressing the stone.
36
For engraving letters and numbers in metal or plastic.
For name plates, jewellery or valuable materials.
Engraving device GE 70
Accurate letter templates fixed in a guide bar. Template contours are
precisely followed using the guide marker (ball handle).
Note:
It is also equally easy to manufacture miniature, individual shapes, engravings,
cut-outs and outline shapes, even in series, using self-made templates or
commercially available templates (plants, animals, coats of arms).
MICRO miller MF 70 and collets are not included in the deli-very.
A practical accessory for the MF 70.
To be fitted in place of the compound
table for engraving.
The lettering to be milled is scaled down during transfer. The transfer ratio can be fixed at 2:1, 3:1, 4:1 or 5:1 by simply adjusting two screws. Guide bar (template holder) holds a maximum of 14 letters.Complete with two sets of letters from A to Z, full stop and hyphen (total 52 items), two sets of numbers from 0 to 9 (20 items), fixing screws for the MF 70 base and a comprehensive instruction manual.
NO 27 102
Solid carbide stylus for use with engraving
device GE 70
For machining steel, cast steel, non-ferrous metals, plastics, glass, stoneware and tiles. Nose angle 60° for high stability. Shaft diameter 3.2mm. Not suitable for freehand work.
Scribing stylus for forming thin lines and engraving fine-lined letters. Also for scribing printed circuit boards for later breaking out.NO 28 764
Engraving stylus for V-shaped letters. Letter width at base 0.5mm. NO 28 765
Stencil set for engraving device GE 70
Letters A – Z, incl. hyphen, full stop and slash. Also numbers 0 - 9. For use with guide bar of the GE 70. NO 27 104
The work piece is aligned and fixed on the movable guide block with clamping jaws or a vice.
Dividing head for MICRO miller MF 70 and
MICRO compound table KT 70
For machining circular work pieces, manu-facturing off-set holes and milled out por-tions, milling key surfaces, four-sided, six-sided materials, etc. Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position). With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70. Size 72 x 64 x 38mm. In wooden box with sliding lid. NO 24 264
37
Small and beautiful: the accurate miller for lab
technicians, optician, jeweller, electronic/model builder.
MICRO miller MF 70
Base of grey cast iron. Including both vertical column and com-pound table of treated, quality aluminium. All axes are play-free and have adjustable gibs. Headstock of die-cast aluminium contains the 24 pole special (balanced) motor which is super stable even at high operating speeds. This stability facilitates the use of the finest cutters. The triple slit, hardened steel MICROMOT collets cover 1.0 – 1.5 – 2.0 – 2.35 – 3.0 – 3.2mm. The table is fitted with 3 T-slots of the 12 x 6 x 5mm MICROMOT norm. An adjustable ruler scale eases the positioning of the workpiece. All handwheels are zero adjustable with 1 revolution = 1.0mm, 1 division = 0.05mm.
Technical data:
220 - 240V, 100W, 50/60Hz. Spindle speeds 5,000 - 20,000rpm. Table 200 x 70mm with X-Y travel of 134 and 46mm respectively, with vertical travel 80mm. Footprint size 130 x 225mm and overall height 370mm. Weight approx. 7kg. The clamping blocks depicted are included too, but not the workpiece!
NO 27 110
Continuously variable speed from 5,000 – 20,000rpm, perfect
for even the smallest milling cutter.
Stable cast iron base.
Handwheels with zero adjustable scales, 1 revolution = 1.0mm, 1 division = 0.05mm.
Table of stable aluminium. Both axes are fitted with adjustable dovetail slides.
Supplied complete with stepped clamp blocks of steel. These are shown on page 18 (offered separately).
Cutter clamping in MICROMOT system collets.
MICROMOT steel collets, triple slitand hardened, from 1.0 to 3.2mm.
Tungsten milling cutters
Two flute cutters and a fishtail profile ensure cutting to the cen-tre, allowing boring. Usable on grey cast iron, hardened cast iron, steel, cast steel, brass, alu-minium, glass and even plastics and carbon fibre. One each of 1.0 – 2.0 and 3.0mm. 3.0mm shaft diameter. Can also be ordered separately (see page 23).
NO 27 116 3 pieces
Precision steel vice PM 40
Milled from steel for precision.
Completely angular.
Jaw width 46mm, clamping capaci-ty 34mm. Total length 70mm. Espe-cially suited for filigree and accurate working with the MICRO miller MF 70 or the compound table KT 70. Sli-ding blocks and fixing screws inclu-ded. Comes in a wooden box.
NO 24 260
For work with extremely small cutters.
38
For precision work: even 0.5mm holes may be drilled.
With three step pulleys for easy speed change.
Bench drill machine TBM 220
The optional MICRO compound table KT 70 is described on page 18.
Machined worktop of high quality, ribbed die-cast aluminium
(220 x 120mm). Adjustable fence with scale. Solid, hard-chromed steel column, 340mm high, 20mm diameter. Super stable die-cast head with VDE approved 220 - 240V motor. Very quiet and of long life expectancy type. Power transmission by aluminium pulleys and flat belt. Three spindle speeds (triple torque at low speeds). Feed lever with adjustable depth scale.
Technical data:
220 – 240V. 85W. 50 – 60Hz. Spindle speeds of 1,800, 4,700 and 8,500 rpm. Extremely high rotational accuracy, 30mm feed. Throat depth (column to drill spindle) 140mm. Six triple slit precision collets for shaft sizes 1.0 – 1.5 – 2.0 – 2.4 – 3.0 – 3.2mm are included. 3/8” thread. Weight 3.3kg.NO 28 128
RÖHM-Chuck
For drill shank sizes 0.5 to 6.0mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8“ thread for MICROMOT bench drill TBM 220.
NO 28 122
Precision machine vices
Machine vice MS 4 made of die-cast zinc is an invaluable accessory and is described in detail on page 19.
Fully adjustable depth gauge.
3 spindle speeds by shifting the flat belt for more than the triple torque in the lower rotational speed range.
39
Ease of operation. With precise jaw guide:
Sublime precision tool. Ideal for the lab,
workshop and delicate operations.
Practical height adjustment via toothed rack with easy to ope-
rate crank. Powerful, long-lasting direct current motor. Spindle drive via triple belt pulley with the advantage of roughly 6 times the torque in the lower rotational speed range.Practical drill depth indicator with adjustable limit stop. Drill spindle with precision bearing. Spindle head with 1/2" thread for the corresponding RÖHM chuck (industrial quality). Spindle with additional fit for steel collets NO 28 200.
Technical data:
220 – 240 Volt. Spindle rotational speeds 1,080 – 2,400 and 4,500rpm. Sliding sleeve stroke 63mm. Height adjustment via crank 70mm. Throat 140mm. Usable table surface 200 x 200mm. Column 45 x 500mm. Tool holder up to 10mm. Drilling performance in steel 10mm. Weight approx. 10kg.NO 28 124
Collet set for drill press TBH
Triple slit and hardened. 1 each of 2.35 – 3.0 – 3.2 – 4.0 - 5.0 and 6.0 mm. With collet closure nut (M 17) Neatly packed in wooden box with sliding lid.
NO 28 200
T-nut set for PRIMUS vices
2 T-nuts, screws and the necessary accessories. For fixing to the drill tables of: BFB 2000, KT 150 and bench drill press TBH.
NO 20 394
Bench drill press TBH
PRIMUS 75Base body made of special cast iron with CNC-machined guides. Interchangeable gripping jaws. Flat-milled working surface. Spindles with rolled trapezoid thread for ease of operation even during high axial load. Width of jaws 75mm. Jaw opening 65mm. Distance from long slot centre to long slot centre 100mm. Long slots 80 x 11mm. Weight 2.5kg.NO 20 392
PRIMUS 100Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.NO 20 402
Practical height adjustment via toothed rack with side crank.
Note:
Table and arm of the table drilling machine offered here are made of die-cast aluminium. A refined, rust-proof and statically very solid material. Fittings and feeds are machined on our highly modern CNC-controlled machines (milled, line-bored, lathed, etc.).
Ideal for jig boring with the compound table KT 150 (page 58).
Stable, strongly ribbed plane-milled worktable with two T-slots.
40
A precision machine for fine sanding work and minor material
correction. Variable sanding speeds 250 – 800m/min.
Disc sander TG 125/E
For all wood types, steel, non-ferrous metals, precious metals,
plastics (also Plexiglas and fibreglass). Powerful drive and vibration-free running thanks to balanced DC motor. Housing of glass-fibre reinforced POLYAMIDE. Aluminium table tilting through 50° downwards, 10° upwards. With angle stop. Sanding disc with affixed silicone film. This surface ensures easy removal of self-adhesive sandpaper. Two additional square silicone films allow for easy storage after use and thus reuse as necessary. Machine can be secured horizontally (with table) on the workbench, but also quickly and safely in vertical position.
Suction channel with union to connect a vacuum cleaner for dust-free working. Each with 2 sanding discs grit 80, grit 150 and grit 240.
Technical data:
220 – 240V. 140W. 50/60Hz. Adjustable grinding speed of approx. 250 – 800m/min (corresponds to 1,150 – 3,600rpm). Sanding disc ø 125mm. Table 98 x 140mm. Sanding height 62.5mm. Size 300 x 140 x 160mm. Weight approx. 3kg.
NO 27 060
Suction channel with adapter to connect a vacuum cleaner.
Sanding disc (125mm). Self-adhesive sanding discs can be easily removed after use.
Table tilting through 50° downwards and 10° upwards. With angle stop.
With C-clamp for horizontal and vertical fixing (see figure above).
With associated horizontal C-clamp (with table), but can also be fixed vertically quickly and safely (to sharpen tools).
Self-adhesive white corundum sanding discs
for TG 125/E
Industrial quality. For sanding soft and hard woods, chip-boards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.NO 28 160 80 grit 5 pieces NO 28 162 150 grit 5 pieces NO 28 164 240 grit 5 pieces
Note:
For dust-free work we recommend ourCompact Workshop vacuum cleaner
CW-matic (see page 42) with integratedautomatic switching unit:
Vacuum runs during grinding, switchingyour tool off stops the vacuuming
with a run-on time of 5 seconds.