zx110to270_cabine

LEARNING SW-2

LIGHTER

ML-CRANE-10

ML-CRANE-11

ML-CRANE-7

CANCEL SW-1CANCEL SW-3

MONITOR C-12

MONITOR A-1MONITOR A-2MONITOR A-3MONITOR A-4MONITOR A-5MONITOR A-6

MONITOR A-16

MONITOR A-10

MONITOR B-2

MONITOR B-6MONITOR B-7MONITOR B-8MONITOR B-9MONITOR B-10MONITOR B-11MONITOR B-2MONITOR B-13MONITOR B-14MONITOR B-15MONITOR B-16MONITOR C-1MONITOR C-2MONITOR C-3MONITOR A-11MONITOR C-7

MONITOR C-6

MONITOR C-15

MONITOR B-3MONITOR B-4MONITOR B-5

MONITOR B-1MONITOR A-16MONITOR A-15MONITOR A-14MONITOR A-13MONITOR A-12

MONITOR A-9MONITOR A-8

SWING ALARM-1ML-CRANE-8

MONITOR C-9

MONITOR C-11

MONITOR C-8MONITOR C-10

ML-CRANE-6MONITOR A-7LEARNING SW-1

ML-CRANE-3ML-CRANE-4

LIGHTER

MONITOR C-13

MONITOR C-14

ML-CRANE-1

ML-CRANE-5

ML-CRANE-2

SATELLITE/PC-10

SATELLITE/PC-2SATELLITE/PC-1

SATELLITE/PC-3SATELLITE/PC-4SATELLITE/PC-5

SATELLITE/PC-7SATELLITE/PC-8

SATELLITE/PC-6

SATELLITE/PC-9

POWER BOOST SWTIN PLATE

HARNESSPULLINGDIRECTION

BACK COVER

YAZAKI

MEASURE HERE

BLACK RETAINER

RELAY BOX

MONITOR A, B, C

RELAY BOX

INSTALL MONITOR A, B AND C AS FOLLOWS. · TURN BACK CONNECTOR'S SURFACE TO A. · VIEW C-C' IS AS FOLLOWS.

MONITOR A, B, C

VIEW C-C'

* MONITOR A, B AND C MUST BE UPPER SIDE WHEN THE RELAY BOX IS RIGHT SIDE

1. ICX-A AND B MUST BE ARRANGED AS FOLLOWS BY USING THE TAPE. · TURN BACK CONNECTION'S SUR FACE TO C. · ON THE LINE OF ICX-A AND B, FASTEN ICX-A AND B WITH IN 50mm FROM I AND IN BETWEEN MCX-A AND B USING A TAPE. · VIEW A-A' IS AS FOLLOWS

2. ICX-C AND D MMUST BE ARRANGED AS FOLLOWS BY USING THE TAPE. · TURN BACK CONNECTOR'S SURFACE TO A. · ON THE LINE OF ICX-C AND D, FASTEN ICX-C AND D WITH IN 50mm FROM I AND IN BETWEEN MCX-C AND D USING A TAPE. · VIEW B-B' IS AS FOLLOW.

VIEW B-B'

SWING ALARM

* ICX-C AND D MUST BE UPPER SIDE WHEN MCX-D IS RIGHT SIDE.

VIEW A-A'

* ICX-A AND B MUST BE UPPER SIDE WHEN MCX-A IS RIGHT SIDE.

ML CRANE

ASS'Y HOUSING CNO4M (N)

HORN-SW.TIN PLATE

RADIO

CANCEL SW.

LIGHTERSLEEVE MUST BE SHORTRELAY BOX

MONITOR A

MONITOR B

MONITOR C

END OF TAPEHARNESSPULLINGDIRECTION

ALL SIRSUITS MUST BE TIGHTER TOGETHER

MEASURE HERE

1. IF NO COMMENT, WIRE 0.3~1.25 MAY BE CAVS AND WIRE 2~5 MAY BE AVS.

2. PIN ARRANGEMENT OF THIS DRAWING INDICATE VIEW POINT FROM THE OTHER SIDE CONNECTOR.

3. NO ELECTRIC JOINT MAY BE BETWEEN FH AND KC.

4. PUT THE PART No. LEBEL ON THE HARNESS.5. PULG CONNECTORS MUST BE BRASS.6. COLOR SIGN DUE TO JASO D607.7. GENERAL EXPRESS ON THE DRAWING DUE TO #X4259303.8. OUTSIDE DIAMETER OF CORRUGATE TUBE FOR CAB EARTH 1, CAB EARTH 2, QOS-CON AND G-LIGHTER MUST BE LESS THAN 20mm.

FASTEN WITH TAPE

SATELLITE / PC

LEARNING SW MOVE THIS SIDE

INSTALL A PULLER(YAZAKI 7147-9178) ANDSPARE FUSES 5A, 5A, 10A AND 20A.

PRINT USAGE AND AMPEREON THE COVER.

LABEL

ALL SIRSUITS MUST BE TIGHTER TOGETHER

APPLY RED TAPE

SPARE

ASSY FEMALE PIUGYAZAKI 7123-2044CN TYPE FLANGE

Attach to Vol. No. : TT187E-01, TT178E-01

ZAXIS 110/120/200/225USR/230/270 CAB HARNESS CAUTION: Parts numbers on the drawing are provided only for reference purpose.To order parts on the drawing, be sure to consult the Parts Catalog.