workpiece drive motor truing spindle truing …...tool interface hsk 50 rpm range 1.000 – 18.500...

WORKPIECE DRIVE

Order number WSA-05-5.0.0.0-0Applications Workpiece drive

Tool interface Customer-specifi c

Motor type Synchronous motor/customer-specifi c

RPM range 0 – 400 U/minVoltage 200 VCurrent 0,57 ATorque 20 Nm

Frequency 2,93 Hz at 16 U/minWeight 35 Kg

Storage Grease – lubricated for lifeProtection class IP 54Motor contactor PTC – 120°C

Load direction axial + radialPosition of use Horizontal/VerticalRadial run-out ≤ 3 µm

Tool change Customer-specifi cCooling system Motor – water-cooled

Housing material SteelConnection cable Without cable

MOTOR TRUING SPINDLE TRUING SPINDLE HAS MACHINE-INDEPENDENT CONTROL

Order number MAS-06-5.0.0.0.0-0 ----Applications Truing

Tool interface cone 1:10Motor type Asynchronous motor

RPM range 1000 - 17.555 min-1Voltage 230 VCurrent 4,7 ATorque 0,44 Nm

Frequency 599 Hz at 17.555 min-1Power 0,8 KW

Weight 8 KgStorage Grease – lubricated for life

Protection class IP 54Motor contactor 1 x PTC - 120 °C

Load direction axial + radialPosition of use HorizontalRadial run-out ≤ 5 μm

Tool change manualCooling system Air convection

Protected against soiling and

cooling lubricant Sealing air 0,5 - 0,8 bar

Housing material SteelConnection cable Without cable

Dimensions 87 x 87 x 290mm incl. plug connection

• Easy operation with touch panel• Self-suffi cient, also compatible

with conventional machines• 230-volt connection• 6-bar pneumatic connection• CE compliant• Good value for your money

TECHNICAL DETAILSArticle no.: MAS-06-5.0.0.0.0Motor: MKL-0800-04-001-265Nmax: 17555 / 599 HzVoltage: 230 V / 4,7 APerformance: S1 / 0,8 KW / 0,44 Nm

TECHNICAL DETAILSArticle no.: WSA-05-5.0.0.0-0Motor: MSP-1900-22-002-266Nmax: 400 Voltage: 200 V / 0,57 APerformance: S1 / 20 Nm

MAS-06-5.0.0.0.0 optional

www.fi meba-maschinenbau.deTelefon: 0 97 21- 67 55 20-0

• Metallic and electrotechnical components (drives)

• Tool clamping systems and cooling systems

• From 10 KW to 30 KW drive output

• Tool interfaces to HSK 100 or SK 50

• Custom solutions

FASCINATING PRECISE

Fimeba Maschinenbau und MetallbearbeitungJakob-Panzer Str. 17Industriegebiet Nord-West97469 Gochsheim

Tel.: 09721 - 67 55 20-0Fax: 09721 - 80 09 171info@fi meba-maschinenbau.dewww.fi meba-maschinenbau.de

A good spindle lives foreverMotor spindles

Connection cable Without cable

Dimensions 87 x 87 x 290mm incl. plug connection

A GOOD SPINDLE LIVES FOREVERBet on professional longevity

Every one of our motor spindles is designed for a long life — whether for the machine tool market, test bed construction, glass pro-cessing, wood processing or production of optical glass.

Our components are made of surface-harde-ned materials and with extreme precision. This is how we ensure that our spindles have opti-mal durability even after wear parts have been changed several times.

Our competence starts with your individual requirements: What forces arise during ma-chining? Which spindle will be used for which material at what RPM?Umdrehungen eingesetzt?

FASCINATING PRECISE

FIMEBA CUSTOMERS ARE CALMER MOTOR GRINDING SPINDLE MOTOR GRINDING SPINDLE MOTOR GRINDING SPINDLE MOTOR MILLING SPINDLE

Order number MSS-02-2.2.9.0-0Applications Grinding

Tool interface HSK 50Motor type Asynchronous motor

RPM range 1.000 – 10.000 min-1Voltage 350 VCurrent 19.30 ATorque 9 Nm

Frequency 500 Hz at 10.000 min-1Power 13,5 KW

Weight 60 KgStorage Grease - lubricated for life

Protection class IP 54Motor contactor 1 x KTY 84–130°C/1 x PTC–120°C

Load direction axial + radialPosition of use HorizontalRadial run-out ≤ 5 µm

Tool change Pneumatic 6 – 8 Bar Cooling system Motor - air-cooled

Protected against soiling and

cooling lubricant Sealing air 0,5 – 0,8 bar

Housing material SteelConnection cable Without cable

Order number MSS-04-2.2.9.0-0 Applications Grinding

Tool interface HSK 50Motor type Asynchronous motor

RPM range 1.000 – 18.500 min-1Voltage 400 VCurrent 32.00 ATorque 15,2 Nm

Frequency 617 Hz at 18.500 min-1Power 26 KW

Weight 60 KgStorage Grease – lubricated for life

Protection class IP 54Motor contactor 1 x KTY 84-130°C/1 x PTC – 120°C

Load direction axial + radialPosition of use HorizontalRadial run-out ≤ 5 µm

Tool change Pneumatic 6 – 8 Bar Cooling system Motor – water-cooled

Protected against soiling and

cooling lubricant Sealing air 0,5 – 0,8 bar

Housing material SteelConnection cable Without cable

Order number MSS-01-2.2.9.2-0Applications Grinding

Tool interface HSK 50Motor type Asynchronous motor

RPM range 1.000 - 10.000 min-1Voltage 370 VCurrent 37.00 ATorque 27 Nm

Frequency 511 Hz at 10.000 min-1Power 20 KW

Weight 60 KgStorage Grease – lubricated for life

Protection class IP 54Motor contactor PTC – 110°C

Load direction axial + radialPosition of use HorizontalRadial run-out ≤ 5 µm

Tool change Pneumatic 6 – 8 Bar Cooling system Motor – water-cooled

Protected against soiling and

cooling lubricant Sealing air 0,5 – 0,8 bar

Housing material SteelConnection cable Without cable

Order number MFS-03-3.1.2.4-0 o. MFS-03-3.2.10.4-0

Applications MillingTool interface SK40/HSK 63

Motor type Asynchronous motorRPM range 1.000 – 12.000 min-1

Voltage 400 VCurrent 50.00 ATorque 110 Nm

Frequency 410 Hz at 12.000 min-1Power 33 KW

Weight 80 KgStorage Grease – lubricated for life

Protection class IP 54Motor contactor 1 x PTC – 130°C/KTY 84–130

Load direction axial + radialPosition of use Vertical/HorizontalRadial run-out ≤ 5 µm

Tool change HydraulicCooling system Motor – water-cooled

Protected against soiling and

cooling lubricant Sealing air 0,5 – 1,0 bar

Housing material SteelConnection cable Without cable

TECHNICAL DETAILSArticle no.: MSS-02-2.2.9.0-0 Motor: MKL-1700-06-001-064Nmax: 10.000 / 500 HzVoltage: 350 V / 19,3 APerformance: S1 / 13,5 kW / 9 Nm

TECHNICAL DETAILSArticle no.: MSS-04-2.2.9.0-0 Motor: MKL-1600-04-002-064Nmax: 18.500 / 617 HzVoltage: 400 V / 32 APerformance: S1 / 26 kW / 15,2 Nm

TECHNICAL DETAILSArticle no.: MSS-01-2.2.9.2-0Motor: MKL-1600-06-001-064Nmax: 10.000 / 511 HzVoltage: 370 V / 37 APerformance: S1 / 20 kW / 27 Nm

TECHNICAL DETAILSArticle no.: MFS-03-3.1.2.4-0 o. MFS-03-3.2.10.4-0Motor: AC 180/220/4Nmax: 12.000 / 410 HzVoltage: 400 V / 50 APerformance:S1 / 33 kW / 110 Nm