vip workshop series nuvo & omniproii integration april, 2005
Post on 03-Jan-2016
215 Views
Preview:
TRANSCRIPT
VIP Workshop Series
NuVo& OmniProIIIntegration
April, 2005
Leadership in Price/Performance
The Omni Family
North America’s Best Selling Integrated Systems
Integrated architectural lighting control
Enhanced security and fire protection
Seamless HVAC control
Voice prompted telephone interface, with built-in voice and digital dialers
PC connectivity via Ethernet, serial interface and modem
Web-Link II Internet access
Home Control for MCE
OmniPro II
NuVo Integration
Plug and Playwith OmniPro II and OmniTouch
NuVo Concerto
NuVo Essentia
www.nuvotechnologies.com
What you need
OmniPro II and OmniTouch
HAI P/N 36A05-4 Serial Connectivity Kit (cable and connector for audio systems)
NuVo Concerto - or - NuVo Essentia
Optional: NuVo sources, such as tuners and other source equipment
Installation
Connect NuVo serial port to unused serial port on OmniPro II.
Set Serial Port Function to NUVO.
Program Audio Source Names and Audio Zone Names into OmniPro II
Audio Button pops up. Enjoy!
Operation
Tap Audio button Display shows zone
name, volume, source and what’s playing
Select Zone you want to control from list box
Select Source Operate buttons as you
would a Concerto keypad
Audio Source selection menu
OmniPro II Audio Source Names
Set-Up Source Names to correspond with Source Names for the NuVo
Start at Unit 457 in OmniPro II for Source Names Example:
NuVo OmniPro II
Source 1 AM/FM Tuner Unit 457 AM/FM Tuner
Source 2 XM Tuner Unit 458 XM Tuner
Source 3 Home Theater Unit 459 Home Theater
Source 4 CD Player Unit 460 CD Player
Source 5 Satellite Unit 461 Satellite
OmniPro II Audio Zone Names
Set-Up Zone Names to correspond with audio zones for the NuVo
Start at Unit 473 in OmniPro II Example:
NuVo OmniPro II
Zone 1 Living Room Unit 473 Living Room
Zone 2 Den Unit 474 Den
Zone 3 Kitchen Unit 475 Kitchen
Zone 4 Patio Unit 476 Patio
Zone 5 Master Bedrm Unit 477 Master Bedrm
Zone 6 Master Bath Unit 478 Master Bath
Programming
New Commands for Audio Systems in OmniPro II ACP
Benefits: Set Up a button (macro) for Entertaining, Watch TV, etc.,
setting volume and source of all zones as needed Outdoor speakers programmed off at night to prevent
unintentionally disturbing neighbors Bed/Bath speakers off when bedtime so kids don’t wake you
up accidentally Set individual preferences when arriving home
Programming
Audio features require PCAccess for programming
New ACP Commands include: On, Off, mute for individual zones or all zones Volume of specified zone, 0-100% Select Audio Source for specified zone Key Press – simulate key press for audio system keypad
EXAMPLE:
WHEN Bob is Home: Den AUDIO ON
WHEN Bob is Home: Den AUDIO VOLUME 40%
WHEN Bob is Home: Den AUDIO SOURCE CD Player
WHEN Bob is Home: Den AUDIO KEY PRESS PLAY
Updating Existing HAI Systems
Install 20A04-2 OmniPro II firmware update chip 2.9 or later
Get PCAccess version 2.9 or later
Get p/n 32I09-1 OmniTouch Loader Kit to add new screens to OmniTouch (can be done in field)
More Info: OmniPro II Version 2.9 Firmware Release Owner’s and Installer’s documents on web site
32I09-1 includes cable, software and instructions for updating OmniTouch from
the front, even after installation
Thanks forAttending!
We hope HAI can be a profitable part of your future!
top related