valves, measurement and control systems
Post on 22-Mar-2022
3 Views
Preview:
TRANSCRIPT
www.gemu-group.com 3
Innovative technology
The GEMÜ Group is a leading manufacturer of valves, measurement and control systems employing more than 1,500 members of staff worldwide. With six production companies and 27 subsidiaries as well as a large distributor network in more than 50 world markets, we are present on all continents. GEMÜ is the world market leader for sterile valve applications in the pharma-ceutical and biotechnology industries.
The GEMÜ range of services for complex system solutions
Valves, measurement and control systems from GEMÜ are used successfully in process engineering and allied fi elds of activity in the following industrial sectors:
• Pharmaceutical, biotechnology and cosmetics industries
• Food and beverage industries
• Chemical industry and environmental systems
• Power generation
• Water treatment
• Processing industry
• Microelectronics and semiconductor industries
• Medical systems
The broad-based modular system and adapted automation components by GEMÜ enable more than 400,000 product versions.
Nominal sizes: DN 4 to 300
Operating pressure: 0 to 10 bar
Media temperature: -10 to 100 °C
Body materials: Cast iron, SG iron, cast steel, brass, stainless steel, lined with hard or soft rubber, PP, PFA, PVDF, ECTFE etc.
Body confi guration: Straight through body (2/2-way valve), T valve (3/2-way valve), multi-port valves (individual)
Operator: Manual, pneumatic, motorized
4
Weir / Full bore diaphragm valves metal
Nominal sizes: DN 4 to 150
Operating pressure: 0 to 10 bar
Media temperature: -10 to 100 °C
up to 150 °C
Body materials: Stainless steel (investment casting, forged body, block material), special materials
Body confi guration: Straight through body (2/2-way valve), T valve (3/2-way valve), tank valve (B600) , welding confi gurations (GMP-SAP valve confi gurations, W600), multi-port valves (M600)
Operator: Manual, pneumatic, motorized
Sterilisation temperature:
www.gemu-group.com 5
Diaphragm valves for pharmaceutical, foodstuff andbiotechnology industries
6
Nominal sizes: DN 6 to 150
Operating pressure: 0 to 40 bar
Media temperature: -10 to 180 °C (option: up to 300 °C)
Body materials: PVC-U, PVDF, cast iron, cast steel, cast bronze, stainless steel
Body confi guration: Straight through body (2/2-way valve), multi-port valves (3/2-way valve), also in battery design
Operator: Manual, pneumatic, motorized
Globe and control valves plastic and metal
www.gemu-group.com 7
Nominal sizes: DN 15 to 1600
Operating pressure: 0 to 16 bar
Pressure rating: up to PN 16
Media temperature: -60 to 210 °C
Body materials: Brass, cast iron, SG iron, cast steel, stainless steel
Body confi guration: Straight through body (2/2-way valve)
Operator: Manual, pneumatic, motorized
Special version: Check valves DN 32 to 600, brass, stainless steel
Butterfl y valves metal
8
Nominal sizes: DN 8 to 100
Operating pressure: 0 to 63 bar
Media temperature: -20 to 180 °C
Body materials: Stainless steel
Body confi guration: 2/2-way body (2/2-way valve), T valve (3/2-way valve)
Operator: Manual, pneumatic, motorized
Ball valves metal
www.gemu-group.com 9
Nominal sizes: DN 2 to 50
Operating pressure: 0 to 12 bar
Media temperature: -10 to 90 °C
Body materials: Brass, stainless steel
Body confi guration: Straight through body (2/2-way valve)
Operator: Electromagnetically directly controlled or servo assisted
Process solenoid valves metal
10
Nominal sizes: DN 10 to 100
Operating pressure: 0 to 10 bar
Media temperature: -10 to 80 °C
Body materials: PVC, ABS, PP, PVDF, PFA, inliner PP-H/outliner PP reinforced
Body confi guration: Straight through body (2/2-way valve), T valve (3/2-way valve), multi-port valves in PVC-U, PP and PVDF on request
Operator: Manual, pneumatic, motorized
Diaphragm valves plastic
www.gemu-group.com 11
Nominal sizes: DN 15 to 300
Operating pressure: 0 to 6 bar
Pressure rating: up to PN 10
Media temperature: 0 to 90 °C
Body materials: PVC-U, PES
Body confi guration: Straight through body (2/2-way valve)
Operator: Manual, pneumatic, motorized
Special version: Check valves DN 32 to DN 600 in PVC, PP, PVDF
Butterfl y valvesplastic
12
Nominal sizes: DN 10 to 100
Operating pressure: 0 to 16 bar
Media temperature: -10 to 50 °C
Body materials: PVC, PP, PVDF, ABS
Body confi guration: Straight through body (2/2-way valve), T valve (3/2-way valve) with T- and L-ball
Operator: Manual, pneumatic, motorized
Ball valves plastic
www.gemu-group.com 13
Nominal sizes: DN 2 to 50
Operating pressure: 0 to 6 bar
Media temperature: -20 to 60 °C
Body materials: PVC-U, PVDF
Body confi guration: Straight through body (2/2-way valve)
Operator: Electromagnetically directly controlled or servo assisted
Process solenoid valves plastic
14
Series: CleanStar® (PFA, PVDF, PP)PurePlus® (PVDF, PP, PFA)
Nominal sizes: DN 4 to 100 (¼" to 4")
Operating pressure: 0 to 10 bar
Media temperature: -20 to 90 °C
Body materials: PFA, PFA-HP Inliner - PVDF Outliner, PVDF, PP
Body confi guration: Straight through body (2/2-way), T valves (3/2-way), 3/4-way valve, optional multi-port valve blocks
Operator: Manual, pneumatic, motorized
High Purity valves for the microelectronics, solar energy and pharmaceutical industries
www.gemu-group.com 15
FlareStar® PFA fi ttings DN ¼" to 1 ¼", union nuts in PFA, PVDF (CPFA on request)
HydraLine® Pressure measurement devices with PFA pressure transmitter, transmission fl uid and dry solution available
TubeStar PFA tube DN ¼" to 1 ¼"
SonicLine® Ultrasonic fl owmeter ⅜" to 1"0.06 l/min to 120 l/min
High Purity fi ttings, pressure measurement systems and fl owmeters
16
Nominal sizes: DN 1 to 7
Operating pressure: 0 to 10 bar
Media temperature: -10 to 50 °C
Body materials: PBTP, PPS, Aluminium
Body confi guration: 3/2-way, 4/2-way, 5/2-way, 5/3-way
Operator: Electromagnetically directly controlled or servo assisted
Pilot valves / Valve manifolds
www.gemu-group.com 17
Pressure transducer, pressure measurement device, diff erential pressure transducer, diff erential pressure measurement device
Flowmeters (variable area principle), magnetically inductive fl owmeter, fl ow transmitter (turbine measurement principle)
Float
Temperature transmitter, temperature measurement device PT100
Pressure measurement systems
Flow measurement systems for volumetric fl ow and fl ow rates
Level measurement systems
Temperature measurement systems
Display units for limiting values and measured values
18
• For monitoring linear and quarter turn valves
• Mechanical switches and proximity switches
• Monitoring of set limiting values and/or continuous valve position feedback
• New "self-learning“ generation, i.e.manual or automatic programming of switch points during initialisation
• Combi switchboxes with integrated pilot valve
• ATEX versions
• Versions with fi eldbus capability
Electrical position indicators
www.gemu-group.com 19
• 3-point controller for position control of motorized valves
• Electro-pneumatic positioner for pneumatically operatedvalves with quarter turn or linear actuators
• Electro-pneumatic process controllers for pneumatically operated valves for precise temperature, pressure, fl ow and level control
• Direct and remote mounting
• Versions with fi eldbus capability
Positioners and process controllers
20
• AS-Interface master as controller
• AS-Interface master with integrated Profi bus-DP/ControlNet gateway
• AS-Interface power supply unit
• AS-Interface connectors and extension plug
• Combi switchboxes for AS-Interface, DeviceNet
• AS-Interface fl at and programming cable
• Further products and versions on request
Fieldbus products and accessories
www.gemu-group.com 21
We would be happy to advise you on our comprehensive product range, as well as our highly effi cient system solutions.Get in touch with us so that we can tell you about the advantages and possibilities of the GEMÜ product range. We can send you detailed product data-sheets and descriptions of selected applications upon request.
Headquarters in Ingelfi ngen-Criesbach
Imprint
Published by GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Address Fritz-Müller-Strasse 6-8D-74653 Ingelfi ngen-Criesbachinfo@gemue.de
Developed by GEMÜ Group Sales Marketing DepartmentStatus 06/2016
22
GEMÜ manufacturing sitesand sales locations worldwide
AFRICA GEMÜ Valves Africa Pty. LtdPhone: +27(0)11 462 7795Fax: +27(0)11 462 4226office@gemue.co.za
AUSTRALIAGEMÜ Australia Pty. LtdFax: +61-2-43 23 44 96mail@gemu.com.au
AUSTRIAGEMÜ GmbHPhone: +43 22-36 30 43 45-0Fax:+43 22-36 30 43 45-31info@gemue.at
BELGIUMGEMÜ Valves bvba/sprlPhone: +32 2 702 09 00Fax: +32 2 705 55 03info@gemue.be
BOSNIA/HERCEGOVINAALTERA d.o.o.Phone: +387 51 434 311Fax: +387 51 434 311altera@blic.net
BRAZIL / SOUTH AMERICA
GEMÜ Indústria de ProdutosPlásticos e Metalúrgicos Ltda.Phone: +55-41-33 82 24 25Fax: +55-41-33 82 35 31gemu@gemue.com.br
BULGARIAGEMÜ GmbHPhone: +43-22-36 30 43 45-0Fax:+43 22-36 30 43 45-31info@gemue.at
CANADAGEMÜ Valves Inc.Phone: +1-678-5 53 34 00Fax: +1-404-3 44 93 50info@gemu.com
CROATIASTRIX d.o.o.Phone. +38 51 23 70 381Fax +38 51 23 70 675strix@zg-t-com.hr
CHINA GEMÜ Valves (Shanghai) Co., LtdPhone: +86-21-2409 9878info@gemue.com.cn
CZECH REPUBLICFluidtechnik Bohemia s.r.o.627 00 BrnoPhone: +420 548 213 233-5Fax: +420 548 213 238brno@fluidbohemia.cz
DENMARKGEMÜ ApSPhone: +45 70 222 516 Fax: +45 70 222 518info@gemue.dk
EGYPTNoaman Engineering Co.Phone: +20-2-33 47 21 57Fax: +20-2-33 03 18 79
ESTONIA/LATVIAUAB ″Biotecha“Phone +37 85 270 9055Fax +37 85 270 9056info@biotecha.lt
FINLANDGemü OyPhone: +35-89-82-54-14-0Fax: +35-89-82-54-14-13orders@gemue.fi
FRANCEGEMÜ S.A.SPhone: +33-3 88 48 21 00Fax: +33-3 88 49 12 49info@gemu.fr
GERMANY GEMÜ Gebr. Müller GmbH & Co. KGPhone: +49-79 40-12 30Fax: +49-79 40-12 31 92 (Domestic) Fax:+49-79 40-12 32 24 (Export)info@gemue.de
GREAT BRITAIN / UK GEMÜ Valves Ltd.Phone:+44-19 25-82 40 44Fax:+44-19 25-82 80 02info@gemu.co.uk
GREECEA. Stamopoulos Industrial ProductsPhone: +30-210-7798 663Fax: +30-210-7473 359astamop@otenet.gr
GUATEMALAProyect, Guatemala S.A.Phone: +502 2429-0202Fax: +502 2476-7439guatemala@grupoproyect.com
HONG KONGGEMÜ Valves (Shanghai) Co., Ltd.Phone: +86-21-64 42 65 52Fax +86-21-64 89 18 85info@gemue.com.cn
HUNGARYMULTIVALVE Kft.Fax: +36 1306 4491iroda@multivalve.hu
INDIAGEMÜ IndiaRepresentative Office Phone: +91-79-64505560sales@gemu.in
INDONESIAGemu Valves Pte Ltd(Indonesia Representative Office)Phone: +62 (21) - 6231 0035Fax +62 (21) - 2907 4643info@gemu.co.id
IRANSINARAD Kala Co., Ltd.Phone: +98-21- 22096277, 2095187Fax: +98-21-22096811GEMU@sinarad.com
IRELANDGEMÜ Ireland LtdPhone: +353 (0)21 4232023Fax: +353 (0)21 4232024info@gemu.ie
ISRAELTreitel Chemical Engineering Ltd.Phone:+972-3-9 78 77 77Fax:+972-3-9 23 29 28gemu@treitel.co.il
ITALYGEMÜ S.r.l.Phone: +39-02-40044080Fax: +39-02-40044081info@gemue.it
JAPANGEMÜ Japan Co., Ltd.Phone: +81-52-936-2311Fax: +81-52-936-2312info@gemu.jp
LITHUANIAUAB BIOTECHAPhone: +370 5 270 90 55Fax: +370 5 270 90 56virginijus.kalvinskas@biotecha.lt
www.gemu-group.com 23
GEMÜ manufacturing site
GEMÜ subsidiary
MACEDONIAEurocons Group d.o.o.Phone: +381 13 801 460Fax: +381 63 394 790borko@eurocons.co.yu
MALAYSIAGEMU VALVES PTE LTD(Malaysia Representative Office)Phone: +(603)- 7832 7640Fax: +(603)- 7832 7649info@gemu.com.sg
MEXICOGEMU Valvulas S.A. de C.V.German Centre 01210 Mexico, D.F., MexicoPhone: +52 55 7090 4161 +52 55 7090 4179
NETHERLANDSStartflow B.V.Phone: +31-8 80 04 46 00info@startflow.nl
NEW ZEALANDGEMÜ Australia Pty.Phone: +61-2-43-23 44 93Fax: +61-2-43-23 44 96mail@gemu.com.au
PHILIPPINESGEMÜ Valves PTE. LTD.Phone: +65-65 62 76 40Fax: +65-65 62 76 49info@gemu.com.sg
POLANDAFT Sp. Z. o.oPhone: +48-61-8 20 51 45Fax: +48-61-8 20 69 59aft.poznan@aft.pl
PORTUGALContimetra-Instrumentos Industriais, LdaPhone: +351-21-4 20 39 00Fax: +351-21-4 20 39 01contimetra@contimetra.com
ROMANIA String S.R.L. RomaniaPhone: +40 238 72 62 80Fax: +40 238 71 58 00info@string.ro
RUSSIA OOO „GEMÜ GmbH“Phone: +7 495 980 662 58 35Fax: +7 495 980 662 58 35info@gemue.ru
SERBIA Eurocons Group d.o.o.Phone: +381 13 801 460Fax: +381 13 837 250info@eurocons.rs
SINGAPOREGEMÜ Valves PTE. LTD.Phone: +65-65 62 76 40Fax: +65-65 62 76 49info@gemu.com.sg
SLOVAKIAEURO-VALVE s.r.o.Phone. +421 31 705 5007Fax +421 31 705 5007euro-valve@euro-valve.com
SLOVENIAGeneral Industry, Water Treatment, Plastic Piping Systems Strix Inziniring d.o.o.Phone: +386 1 54 66 050Fax: +386 1 54 66 058info@strix-inz.si
Pharma, Biotech, Food Ipros d.o.o.Phone: +386 1 200 26 20Fax: +386 1 423 18 24ipros@ipros.si
SOUTH KOREAJID Corporation Co. Ltd.Phone: +82-2-326-5545Fax: +82-2-326-5549master@jidcorp.com
SPAINELION, S.A.Phone: +34-9-32 982 000Fax: +34-9-34 311 800elion@elion.es
SWEDENGEMÜ Armatur ABPhone: +46-31-99 65 00Fax: +46-31-99 65 20order@gemu.se
SWITZERLANDGEMÜ GmbH Phone: +41-41-7 99 05 05Fax: +41-41-7 99 05 85info@gemue.ch
TAIWANGEMUE Taiwan Representative OfficePhone: +886-3-3 56 68 50Fax: +886-3-3 56 68 45gemu.twn@msa.hinet.net
THAILANDGEMÜ Valves PTE. LTD.Phone: +65-65 62 76 40Fax: +65-65 62 76 49info@gemu.com.sg
TURKEYDurko Çevre Enerji Phone: +90 216 402 20 00Fax: +90 216 402 20 10info@durkocevre.com.tr
UAE + MIDDLE EASTGEMU Middle East FZCOPhone: +971-4-88 60 125Fax: +971-4-88 60 124info@gemue.ae
UKRAINECSC AutomationPhone: +380 (44) 494 33 55Fax: +380 (44) 494 33 66csc-a@csc-a.kiev.ua
UNITED STATESGEMÜ Valves Inc.Phone: +1-678-5 53 34 00Fax: +1-404-3 44 93 50info@gemu.com
top related