using arcgis 3d analyst
Post on 01-Apr-2016
271 Views
Preview:
DESCRIPTION
TRANSCRIPT
Using ArcGIS™ 3D Analyst™
GIS by ESRI ™
�������� � � �� � ������� ����� ��������������� �� �� ����� ���� ������� ��
!�� ���������� ������� �� ��� �� "��� �� �� �# �"���� ������� �� ����� !��� $��% �� ���� �� "���� ����� ���� ������� ��$ ��� ��������������� ������� ������ ��� ���������� &� ��� �� ��� $��% ��� '� ������" �� �� �������� �� ��� ���� �� '� ��� �����( ��� ���� ���� ���� ��( �� �"���� ���� ������ ��� �� ������( �� '� ��� ���������� ������ �� �������� �����( �# �� �� �#������� ������� �� $����� '� ����������)"��� ���"�� '� ��� �������* ����� �+������( ����( ,- &�$.��% ����( ��������( �� /�,0,1-2 ( ����
!�� ���������� ������� �� ��� �� "��� �� �"'3� � ����� $���" ��� ��
�����������
��������� 4���5����� ����� ��� �"���� �� &������������"� � ��� ��� ������������� 6&���789� ����"����� :�'������ 69�:78���� ��
��������� � ���;�'���� <���� ��� �"���� �� �� ���;�'���� <����=���>"�����"������
��������� � <����"� ��2,0 ���� ���������� ��� ������ �� �� ��� �"���� �� �� ����������� ��%����� ������������ ����������
��������� ?����� ����� ���� ��� �"���� �� ������� �� ���� ��������������� ������
��������� � �������� ��� ����� ��� �"���� ��+���;��( ������$���� ��+���� �"��� �#� "��� @��� � �� ��������������������
������ ����� ������
������������������
������������������������������������
��� ���$���( �� "�������( ���8�� ��� ��������� ����"���� �� �"'3� � �� ���� �� �� :� ������������� �� �� ���� ����� �� ���� ;��������
� )"��� ������ ��� ���!���!�48:�+�!�4��;?!��� � �����"�( "��( �"��� ����( �� ��� ���"�� '� �� ���� ;�������� �� �"'3� � ����� ���� ��
�� ���� �� A�� BC����012D�������� �( ��( ��� ��� 69�& 2/-07E A�� BC����012/ 69�& 2/-07 ���8�� A�� B2���2282���2� 6������ ��� !� ��� �� 4��8
����"�� ���$���7E ��� 4A��� B�C����010 2C 6&@5 2//C7 6!� ��� �� 4��7 ���8�� 4A��� B��0�0� � 6����"�� ���$���7( �� ����� �'��� ����� ��8
+��"�� "��� �� ����( ,- &�$.��% ����( ��������( �� /�,0,1-2 ( ����
����( �� ���� ���'� ����( ,4������(�� ����(�� ������(�� +��(�� � ���(�� ;��( �� ���� ����� ����(;�� '� ����( ���$$$������ �� ���
�������%�( ��������� �������%�( �� ����� � ���%� �� ���� �� �� ����� ����( �� �"������ ����"���( �� ����� ���� 3"����� �����
@��� �������� ��� ����" � �������� ������ ��� �������%� �� ��������� �������%� �� ���� ����� ��� �������% �$�����
attribution.p65 08/28/2002, 12:27 PM1
iii
Contents 1 Introducing ArcGIS 3D Analyst 1�������������� ����������������������� ���������� ���������������������
2 Quick-start tutorial 7��� ���������� �������������������� ���� ����� ������ !����"���������� ����#�����������$����� ���� �% ��� & �������! ��� �� ������' #����������$����� ���� �% ��� & ���� ������! ��� ���������� ���������������������������� ���( �) �� ������*+������������������ ��������������� ���� ���, ���� ����� !�� ��� �����-�����������(.
3 Creating surface models 69�����������#�����������#����!������������/$����� ������������#�����#�!�� ����������/�*�������� ��������������#������������0� � ��� �������� ����������-�" ��������������� �������� # ������� ����������-��� ������������ ��!��,��������.-��� ���������� ����������!�#����������� ����������������.$-��� ������������������������.�-��� ����������������� &��������.������ ����*+���#�����#�!�"����������������.�) �� ������*+�������.������ ������*+�#�!����������������./����� ������������#�!����*+�������.�
4 Managing 3D data 99����������1�� ����������$$2��" �� ������������������$�������!���3�����1���"��3�����������������������$�� ����� ����������� �������������$.
TOC.p65 05/13/2002, 11:40 AM3
iv USING ARCGIS 3D ANALYST
12-���� ������-�����#�!������������������������� ������������#��������������������(
5 Displaying surfaces 115� ����� ������������#����� �������������4� ����� ������������#�������������/-�!1� & ���������� ����,����"�������������(� ����� ����*+���#��������������5�, ��������������������������������-��� �������������������4
6 Analyzing surfaces 1376��� �����#����"��������������7��������� �������������#�����#�����������($������� ���������������(���� " ��������#�!������������#�����������(�������� �����������������((��� " ����������#�!������������#�����������(�5��� ����������������(4��� " ��������� ����#�!�����#�����������(������& ���" � 1 � �����������$����� ������ ���#�� ���������������� " �����" �����������������!�� ���� ����������������(��� " ������ ��������#�����#�������������-��� ��������#����� ������������������/�����! � ����� �������������# ������������8 �� �����������������������������.������� ������������"�!����������4$9������ #� ���������������4�9������ #� ������������������4���"��� ����������������*+����"�����������������44
TOC.p65 05/13/2002, 11:40 AM4
CONTENTS v
��"��� �����#������"������������������4/����� ������#��������������4.
7 3D visualization 173����� ����������������������/(��� ����������� ��������������������/48�������������������������//��# � �������&:"�����#�����������������/�9�����������������������������# � ���������������� ���#������������������������4��"��� ���&:� ������3��� ������������;##���� ��������� ����� ������������������.������ ���������������� ������������������.$7� �����������##�������1����������.�7� ���#������� ��������������������������������������������.(����� ����������<������ ����� � ����������.�% �� �����������#�!�� ##��������������������.45���� ���������" �������������./����� �������" ��������� �����������..+�" ��� ������������������ �������#�������������$�-��� ���1,!��,���������$�-��� ������������� ���#����������������$(����� �������"��� ������������� ���������$�7� ����� !��������� ���������$4����� �������1��,����������������$������ ������������� ��! ��� ����������$����� ���������������������������������� ���������������� ����������!����������-����� ���#������� ������������������/����� ��������������������2� �� ��������������������
TOC.p65 05/13/2002, 11:40 AM5
vi USING ARCGIS 3D ANALYST
8 Animation 225���-������� !�� ����������4����� ����� !�� ����������������� ����������� "��" ���� ������������������.9���� ����������� ���1��,��� !�� ������,����������$����� ���,��#��!������������5�, ��������� !�� �����������(5�, ����� !�� ���#�!����������������7� ��������� !�� ��5���������������/� ! ��������� ��� �������� !�� ��5���������������.-�" �������� !�� ���������($-��� ����� !�� �� �=�� ���������-������� !�� ��# �����������(�
Glossary 245
Index 251
TOC.p65 05/13/2002, 11:40 AM6
IN THIS CHAPTER
1
Introducing ArcGIS 3D Analyst 1• What can you do with 3D Analyst?
• Tips on learning 3D Analyst
��������������� ��������� ������������������������������������������ ��������������������!�������"���� ���������������#������ ��������$��%��##���������� ��������������������&��#������������$��#�'����������� ��(�����%������ ��)�#�"
������������������&��#���#����������$�����������$�����������������%����������������$���������%��%��#������*�������������������������"�+���������#���������������������������������*����������!������*��������*����������������������������������������$����������������"�+������������������� ��������������� �������������������������� �����*����"
��(�����%�����!�������'����� ����������������������%���������������������������$����������$��%�#��#������"�+�������#�����$������������������������� ��(�����%�����%�����������������%���������������������� ������"
��)�#�����!�������'����� ���������������������������$����*�����*�������������������$������������ �����*������,����������'��������������������������������*�������������� ����������'�������*�#������*������*����*�����**���������������"�+�����������������������������*������������������������'�������'���$������*���������������#��*���������%�������������������*���"
��� �������������������������������*��������*�����!�����%��$��������������-����������.�������������%��� ����$�����������*������������%��#������� ��)�#�����%������*�������#����������� �������"
ch01.p65 05/16/2002, 9:35 AM1
2 USING ARCGIS 3D ANALYST
What can you do with 3D Analyst?
�������������" ������������#����� �����-�����#�������� �����" ��� &�� ��#��������>�*������������������������������5�����������!����##��� "����!������������?*-�������������������� ���������#�������� � ��� �����5��>
@���������������������� ���#�������������������� ����������������3���������������������������� ���#�������������
3D view of raster and vector data
3D view of utility poles and power lines
Viewing a scene from another perspective with another viewer
What can you do with ArcScene?
��������#���������������������� �� ���������-��������� ��� �>���-�������" �������� ����#����#��" �� ���!�� �����������#��������#��" ��� & �������3������ �����#����3����������& ����#����>
Visualizing data
������������������������ !�������"����������"�����#���������������"�����#�������#�!�����#���>�@�����" ����������#�!�!�� ����" ��� ����� ���� ##������" �����>
ch01.p65 05/13/2002, 11:41 AM2
INTRODUCING ARCGIS 3D ANALYST 3
��������"��� ������������� ��#������ �3�������� ����������!�����������#�����������3��������� ��! ��� ��#����������>
Creating surfaces
�����������������������������"� ��1��� ��1������-�����������5���������������������#����!�����#�!����?*-�����>@����� �������������������#����������������������#���������� ��������� �������������,�A�*+B���#����>
Exaggerating the vertical dimension of a scene
@�������� "��������������#�����������������#�!���#���!����3�������������3�����# ����������������������������#���>
TIN and raster surfaces
Slope and aspect rendering of surfaces
Contours and steepest paths
Analyzing surfaces
������������������ ������� "����'��������"����� ������������#���������������"�� �3�����3������������#��*+�>
@��������������&������" � 1 � ���1�������� ##���������� ��������#���C�������������������������������"���#� ��! ��� ��#����#����A� "����������� ��������� ���� �BC������������ #�������������#��� �����3������� �3���#������������� ��������>
What can you do with ArcMap?
*������ ������������������������������������������1�������5��3���������������#�������#��������� ������������ ����,�� �����5���������������� �����-����>�*�������������"������������������������ �����5�� ������������������# ���� ���#�� ����������#���3�����������#��� � � & ������#����������
ch01.p65 05/13/2002, 11:41 AM3
4 USING ARCGIS 3D ANALYST
����� ���� ���&:"�����#�!�����#���3�����������������������������������#�������# ���A������� �����"�� ��"���� ������B����������� ��>
Line of sight created on a TIN in ArcMap, displayed in ArcScene
3D line graphic created on a raster in ArcMap and a profile graph of theline.
ArcCatalog lets you browse your data and create and preview layers in3D.
Navigate the 3D preview; identify features, raster cells, and TINtriangles.
@������������" ���������������<"���������� �����-����>�@�����������!��������#��������?*-������ ���� �����
What can you do with ArcCatalog?
���������� ���������?*-����� ��� ��#��!���� ������?*-����>����������������������" ���������" �������������������>�@������������?*-�������������������# ������ �����" �� �������� ��>
��!1�� ���#����������������>�@�������������!�������#��������������������# ���� ��������������������������1����������1�� � � & ������#������� �����5��>
ch01.p65 05/13/2002, 11:41 AM4
INTRODUCING ARCGIS 3D ANALYST 5
Tips on learning 3D Analyst
�������������� ���������������������������������������������������������������� ��!�������������������������� ���������������������������������������������������������� ��������
"������������������#$��������%��������������&�'(����)������������������������!��������������&�����������������������#$������������*�������������#$��������������������������������������������������������� �#$��������%���������������������������������������������������������������������!�����������������������+����������������������������������������������������
Finding answers to questions
,����������������������������������������������������-�����������������������������������������������������������������+�������������-�����)��)�����������������-�������������������������������-�������������������������������������.��-���������������-���*����������������������*��������������������������������������� ����������������!������������!���/��������������������������������������
����!���������!����������������������������������������������������������������%��������������������������)������������������������������������������!����������������������������������������������������������0�������������������������������������������������������������������������������1����������������������!������������������%��+����������������������)!�)���������������������������������������������������������������������������������������������������������������������!�������������!��������������+������������������������������������!����������������������������������������
Getting help on your computer
������������������!�������������� ���$������.�������������������������#$��������� ����������������.����������������
Contacting ESRI
�������������������2�3���������������������������������������������������������������������-���������� ��#$4�����������������'��������� ��������������������' ����������������������������� ���$������.���������+�����������-�����2�3�������0!������������������������������������������������������#$������������� ���
ESRI education solutions
2�3�����-������������������������������������������������������������ �����������������������������+�������������������������)�����������0!)!�����������������)����������!��������������������������������������������������������5�������������������������������������������
ch01.p65 09/03/2002, 12:56 PM5
ch01.p65 05/13/2002, 11:41 AM6
IN THIS CHAPTER
7
Quick-start tutorial 2• Copying the tutorial data
• Exercise 1: Draping an image overa terrain surface
• Exercise 2: Visualizingcontamination in an aquifer
• Exercise 3: Visualizing soilcontamination and thyroid cancerrates
• Exercise 4: Building a TIN torepresent terrain
• Exercise 5: Working withanimations in ArcScene
/���'����$��������������� �������������������"���������!�����������������������������$���0
1 2��� ��(�����%����*��������#�����$��������"
1 ����������� ������"
1 ������#��#�������*������$��%�����"
1 (��������$����*������������*����-��*���������������*����"
1 (��������$�����������*���������*����#���������"
1 3�������/�4����*����*�����!�����%�*�����������"
������������������������������������������������������� ��������!����������� ���������������������������������������������������������������������������$��&���������������������"� �&���������������������������*��������������#��������������������������*������������*����������������*�����������������#�����#���*�������������������"
ch02.p65 05/13/2002, 11:43 AM7
8 USING ARCGIS 3D ANALYST
Copying the tutorial data
5���������$������#������������������������������������"�+���$������� ��(�����%����'��$������������#����������"
6" (���&�������#��������7��%������#�������� ��������������& ��(�����%"
�" ��%�������&������� �������*��������������&�(�#�"
�
��(�����%����������*������������%�����������"�/�����*�������*����� ��(�����%�$����$��������������������������8����%�����������'���9���������$��*���$���������������%��� �������#��������������������������$��*����%��%��#�����������������*������"�/�����%���������*����(�����%�$����$����$����������������*�������������'�������*�����(�����%�����"
-" (���&��������:�����������'��'�!�������#������#����������;���%��; ��/�����*�������������������$����������������������������������"�7���������"
/��� ��/�����*�����������$��������������'�������*����(�����%�����"�+�������������������������������(���������'"
<" ��%�������&�����������������$���������$�������#������������������������������&�7����"
/���*�����������#�����������������������"�4�$�����$�����&����*�������������������������� �������*������������(�����%� ����"
�
�
�
ch02.p65 05/13/2002, 11:43 AM8
QUICK-START TUTORIAL 9
=" (���&������� �������*���������������������������������%��������������#�������������(�����%���*�����(�����%�����"
/����������$���*������������������������(�����%�*���������������#���*������������������"
�������%��#����������������%�������������������� ��(�����%�#���������������#������*�����������*���*����������������%��������������������"�/�������$�������*��������������������%��#�����'��������&����**������*��������������*������"�+�����������������#����������� ��(�����%���������>#�����������%'�!�������������������'"� ��(�����%�$��&��*������$���������#����������������**������������**�'����*����"
�
ch02.p65 05/13/2002, 11:43 AM9
10 USING ARCGIS 3D ANALYST
?��$��%����������������������%�����#��������������������*���������*������������%�������������������%��*����#������������������%��������$�����������������������#���*���� �����9�� ���*���"
���%������������9�����%����%�����������%�������?������(���*�����"�+��������������������/�4���������$��������������������������������������%����������$���������%�������*������������*���"�/������%�������%������*����������'����������������������������������������������%�'�����#��%��������%���������������������*���"�������?���������%�������$����##���������������*�4 @A7:@(������"
Turning on the 3D Analyst extension
+���$���������������'���������� ��������!�������"
6" (���&�/�������������&�!��������"
Exercise 1: Draping an image over a terrain surface
-" (���&���� ������"
� (���&�(����"
Previewing 3D data in ArcCatalog
3�*�����������#���������%�������$����'��$��������������������������#�����$������� ��(�����%"
6" 4���%������������� �������*�����������������������(�����%� ����"
�
�
�
ch02.p65 05/13/2002, 11:43 AM10
QUICK-START TUTORIAL 11
-" ���'�������&��� ������"
�" ���'�������&�!������6"
=" (���&�����7�����$���'"�+�������#�����$���������������� ��(�����%"��������� ������������������������������#�����$������������������������������"
B" (���&�����7�����$����#��$������$���������&����?��$"
+���������*������������������������/�4�������������������?������/������"
������������������������%��%��#��������"�����������������*����������'������$�����%��%��#����������������'����$���������#�����������������"
<" (���&�������?������/������"
� �
C" ��%�������&��'��������#�����$�$����$���������&���?��$�/����"
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM11
12 USING ARCGIS 3D ANALYST
/���#�����$�'������������#�����$����������$������*�������##���������������?��$�/���������'��"
/���������������������������������"�/���4���%�����������������$��������� �������������������#���������������������#�����%��������������'�������������������&�$�������%%��%�����������#�����$"
D" ��%�������&�����������#�����$��������%���$�"
�
/���4���%�������������������$��������*�����#�����$����������"�+����������������������*�������'���������%����#��������������������"
/���4���%�������������$�������������������������������%�������##���������$������%���'������&��%�������%%��%���*��������%��������#�������$������#�������������������#�����$"
E" (���&�����������#�����$��������%����������%��" /���#�����������%����������F������@>���#������������������$� �������������������"
6G" (���&������������'�����.���'����������%���������*�'��������*�������������$��'�����������.�������%���������%��"
Navigate
Zoom In/Out Pan
ch02.p65 05/13/2002, 11:43 AM12
QUICK-START TUTORIAL 13
/���#�����������%����������7���#�������������������$#�������������������"
66" (���&�����������*��'��������������&��������/�4"
/������$����������������*�����!������*���������"
/���������*����������$����$����$�����������������������#���������#�����*��������*�����������#�������������&��"
6-" (���������������*����������$����$"
6�" (���&�����5����!�����'�����"
4�$����9����!��������������*�������������'�%�������������$��������%���������"�/�����!�����#������������� ����������������������������%���������$������"
Starting ArcScene and adding data
��������������������$���*������ ������"� �����%���������#�����$������������ ��(�����%�� �����������$��������'������#����#��!��������$���������#������������*�����"
6" (���&����� �������'����������������?��$�/���������'��"�
�
Identify
ArcScene
ch02.p65 05/13/2002, 11:43 AM13
14 USING ARCGIS 3D ANALYST
�������������"�4���������������*����������������� �������������������'�����������������������������%���������������������������� ��(�����%"
�" (���&����� ��������'������������� ������������������'��"
�
�
<" 4���%����������������*������*���!������6"
-" (���&�����������?������/��������������������(�����%������������%���������������%��������������*����� ������$����$�������������������������'�����"
/���/�4�������$�����������$������"
�
ch02.p65 05/13/2002, 11:43 AM14
QUICK-START TUTORIAL 15
=" (���&������"/�5"
B" (���&� ��"
C" 2�����&�����������?������/������������"
�
/������%�����������������������"
/������%��������$�������#������$������'��������������������*� ���"�+���������������'��������������?����������������*����$��������������������'���$�G����������������������������8��������������'�����������������*��������$����� ����"
4�$�����������������$��������%�"�/���'���&����������#������*��������%����������������������������������������*�#��������#��������%����*����������%����������������"
+���������������������%��������������"�4�$�����$�������%������#��#��������*��������%�����������������������%�$����'�����#�����������������������*���"
Draping the image
�������������*������!�������*������������$������������%������%�������������*���*����������'��������������������������������#��'��$�����������*������!����������������#���*������������$����'���##������$�����������#���������%���������������������*���"���� �������������������#���������.���������%���%��������%������-��*�������.����������*������%�������/�4��'������%���%�����'�������%�����*�����������*������� ���*���"
�
�
ch02.p65 05/13/2002, 11:43 AM15
16 USING ARCGIS 3D ANALYST
6" ��%�������&������"/�5�������� ���������'����*�����������������&�7��#������"
�" (���&������#��������>'��������%����*���������*�������*���"
3�����������/�4����������������*���������������������������##���������������*�������#��$������"
<" (���&�>H"
�
�
/���������7��#������������%�'�!��##����"�+�����������%���$���������������$���������#���������������'��������%����#��#������"
-" (���&�����3����I��%������'" /������%��������#�����������������������*���"
4�$�����$����'���'����������%������������������%������������������������#�'��$�������*������!������������$��'��������%���������������������#���*������������"
Exploring the image
+���$����������������%������������������� �������/��������'�������!#������������#������%�"
6" (���&�����F�������'�����"
�
�
�
ch02.p65 05/14/2002, 7:37 AM16
QUICK-START TUTORIAL 17
-" (���&��������%���������%����������������������*�������%�"
<" (���&���������������������$������%��#��������������*�"
�
�
�
/��������� �������������������#�����*��������%�"
�" (���&�����4���%����'�����"
/�����������������������������$���%�����$��������������&��������%�������������&��%���$��������������#���������%������������������*��������*����������"
Elevated, rocky area
FloodplainAlluvial fan
ch02.p65 05/13/2002, 11:43 AM17
18 USING ARCGIS 3D ANALYST
/��������7��#������������%�'�!��������������#��#����������������������'�������*������������������������"�/��������������������������!�%%�������������'��&%��������&������������������������������������!������*������������������$��������������������������������������#���������*������%�����������������������������*����"
-" (���&���������������'"
� �
�
�" /�#��J-K��������?��������!�%%�����������'��'�!"
<" (���&�>H"
/����##���������%����*������������������$����'���"
/������������������������'������%���������������������*����������'�����"�/������*������!����.���������*������������������������������%�.�*���������&������������**��������������*��������������*�����*����#����.���������$����'���&���%������������������'�����"�/������&������������������**��������!�����*��������%���������#��%����������*������������#����������$������������������*����"
���#��%��������������%����������������������*��������$���������������������������#�'��$��������%����������#���*������������*��������������!������*��������&���������������������&���#��������*���"
Exaggerating the terrain
/���������������'������������������������������%����*����������������������%�������������������������%���*������������������������-�GGG���������'���������������*����"�������������������������������*���#������������������������'���%������'����*����������������������������$�����!�%%�������������%���*������������"
6" ��%�������&����������������������'����*�����������������&������7��#������"
�
ch02.p65 05/13/2002, 11:43 AM18
QUICK-START TUTORIAL 19
+���������$���������������$��������������*����#�������������������������*������'��$�����������%������&���������������������*������������������������������&�������������*���%���������������*��������*����������"
�
6" (���&�5������������&����� �"
+����������������#�������������������%����!#���������%������������������#�'��$�����������������������%�������������������������������������������������������������#���������������'�����������������������������"
4�$���������9���'��������������������$����������������������������!#���������������*�����������"
Saving the scene
�����������������������������������������&����#�"�/�������������*����������'������$����������������������������������������'���������������$������������������������"
-" 4���%�����������!������6�*�����"
�" /�#��J�����������K"
<" (���&����"
/���������$������$�'��������'���*�����������#��������"
�
�
�
ch02.p65 05/13/2002, 11:43 AM19
20 USING ARCGIS 3D ANALYST
Exercise 2: Visualizing contamination in an aquifer
���%�������������$��&�*�����$�������������"�/���������������$�����*������������$����������������%��������#������?>(�����������&�����������������"�����������*����������#���������������##��������#�������*�?>(���������,��*������������$�������������������������������#��**��������������#�'����������� �������!������*�����#��'���"
�����*����������*�������������������������'���������'����������������$����������"�+���$��������*��������������'����������������������#��'���"
?>(������$�����##���������������*����������'�����3����������L������� ��������"
Opening the Groundwater scene document
/������������������������������/�4���������$���������#��*�����������������#�����������������������$��������������������*�����������������������$�����#�*������������$����������������*�#�����������$����"�+���$�������#�����������������������������������#�����/�4���!���������'������%�*����������������%��������������������!���������$����*��������������������$������������������������%�����'�����������������������'������������������%�� ��"
6" ��� ������������&�5��������������&�>#��"
�" (���&�������$����"�!�"
-" 4���%�����������!������-�*�����"
<" (���&�>#��"
/���������$������������#���"�+���������������*�������������������'����*���������"
Showing the volume and intensity ofcontamination
+��9������#��������������*�?>(������������������������/�4�*�����������������#��������*����������$��������������������������*�����������������������,��*��"
6" ��%�������&����%�����������&�7��#������"
�
�
�
�
ch02.p65 05/16/2002, 9:51 AM20
QUICK-START TUTORIAL 21
-" (���&�����3����I��%������'"
=" (���&�����(��������#����#��$������$���������&���������������#�*�������������"
B" (���&�>H"
C" ���������'����*�����������������&�#����"
�
�
�
�
�
�" (���&��������#��$������$���������&�#��������%���������%����*��������#�����/�4"
4�$�����$��������%���������'���%���*�����������������$����������������*������������������"
<" (���&�������'���%����'"
4�$�������#����'�����������������#���*�����#���������������������������"
�
ch02.p65 05/13/2002, 11:43 AM21
22 USING ARCGIS 3D ANALYST
Showing the relationship of the plume to wells
+����������������������*�����$���������$����������������*����#����"�I�$��������������**�������������$�����$������������������������**������'��������������������������������$����#�����'������������������������%���������#���"
+���$�����!����������$����*��������'����������������#�������'��������������������$�����$�������������������#����"
6" ��%�������&�$�������������&�7��#������"
+���$�������#��������$����#�������������������������,������������#����*�����$���"�/������*��������������������������::M�7/I� *����"
<" (���&��::M�7/I"
-" (���&�����!����������'"
�" (���&�����(���������!��������!#��������'�����"
=" (���&�>H"
B" (���&��������#��$������$�����##��������!��������!#��������'�������%������������*������9��'�������%��"/���$������#���������!#������������%��������������������9���'���!���������$�$���"
C" (���&�>H"
�
�
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM22
QUICK-START TUTORIAL 23
+���������������#������$���������$������������������������������������#����"�4�$�����$��������*������������������$����#���������*���������*��������������������'�������%�����*��������#"
Showing the facilities with a high cleanup priority
������������������#����������������&�������*�����������������%����������%������*���������#�����������������"+��9����!����������*��������������������������������������������������#���� ��������$��������%����#��������*���������#"
6" ��%�������&�*����������������&�7��#������"
-" (���&�����!����������'"
=" /�#��JN�6GGK"
�" (���&�����(���������!��������!#��������'�����"
<" (���&�7��>��/+6"
B" (���&�>H"
/����!#���������������������##������������!�����������������!#��������'�!"
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM23
24 USING ARCGIS 3D ANALYST
C" (���&�������'���%����'"
E" (���&�L���������"
D" (���&�����?��������#��$���������������&�7��>��/+6"
��
66" (���&���������'�����"
6G" (���&�>H"
/���*����������������$��!����������#��#���������������#�������������"�/�����������$����$���������#����������������*������������������������$�������������������#�������#��������������*�����������������������'�����������#������������#�������*�������#����������*�����%�����$����"
4�$����9�����������������%���������������"
ch02.p65 05/13/2002, 11:43 AM24
QUICK-START TUTORIAL 25
Exercise 3: Visualizing soil contamination and thyroid cancer rates
���6DEB���*����������������#��������������������(�����'����������#�$���#��������2&������������%����������*�����������������*�������3������"����������������������������������������*���������*�������������"�>��������*����!#�����%���������������������� �����"����������!������������$�����������$�����*�����*����#�����������������������3������"�>�������*�#�����������������������������*������(6�C��������������"�(6�C���������*��������������������������#�����������'��������������"�/��������������*�#���������$������������*������������������%%��%�����'������������$����������#���#�����#�������������������������������"
/���(6�C���������������������������������������$����##���������������*��������������������&������������������2���������"
Viewing the point data
5����������$�����#�������(�����'����������������$�����#��������"
6" (���&�5������������&�>#��"
/���(6�C��������������������������$��$���������#��������'���������%���%������������������#�������$���������������*������������������"�/������������9����������������������������$��$�������%������'���������%����**���������������#"
Creating 3D point features
/��������(6�C����#��������-��#������$��������������'����">���$���������$�-��#���������������'��������%�����!��������!#��������������'�������%��"�+�����������������#������� ��������������*������9��%���������������$�������'�������������$���������$�������������������������'�������%���*��������*���������������'���"
5���������9�������������� �����������'������ ������"
-" 4���%�������!����������������&�(�����'��"
�" (���&�>#��"
�
�
�
ch02.p65 05/13/2002, 11:43 AM25
26 USING ARCGIS 3D ANALYST
6" (���&�?��$��#��������/���'�������������&���� ������" �" (���&�������#���5�����������#��$���������������&�'���#��M6DD<M(6�C"
/������ �����������'������ ������������������������������������������������������������"�/��� ��)�#��� �����������'����������������������������#������������������������������������������������ ��)�#"
4�$�����$��������������#�����*��������*������������(6�C�#�����"
-" (���&���� ��������#��������(����������������&�5������������"
<" (���&�������#���5������� ����'����'����������������&������#���5������� ����'�������#��$���������������&(6�CM(�MH"
=" (���%���������#���*���������������(6�CM��"
B" (���&�>H"
/���*����������������������������#�����*�������"�I�$������������������������'��������%������*����#�����'����������(6�C�������������������������%��*����G����-GE"BE��$��������������������������������� �������!������*���������"
�
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM26
QUICK-START TUTORIAL 27
Increasing the vertical exaggeration
+���$�����!�%%����������������������$�������$�#������$������������%�����'�������������*�������%�������"
6" (���&�?��$���������&������7��#������"
�" (���&�(���������5����!����"
<" (���&�>H"
=" (���&�����5����!�����'�����"
�
-" (���&���������������'"
4�$������������������������$����#���������������������������������**��������%�����(6�C����#���#����������"
B" 2�����&�����'�!����������'����*����������'������'���#��M6DD<M(6�C���������&�������������%��'���������'�!�������������������*�������"
Extruding columns
?��$��%�#�������������#�����������$�������������%��������" �������$����������!������#������������������"�+���$����!�������������������������#�������������������������#���������������������������������"
6" ��%�������&�/������(�������������������&�7��#������"
�
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM27
28 USING ARCGIS 3D ANALYST
-" (���&�����!����������'" B" (���&�>H��������!#��������3������������%�'�!"
C" (���&�>H��������:�����7��#������������%�'�!"
4�$�����������������������#�������������$��$�����������#��#�������������������������������������"��*���������%�����������������$�����������������������$����������%���������������������������������������������%�����������������������������%������������������$������$���(6�C��������������������������������������%��������������"
Creating a surface from point sample data
+���&��$�$�����������������������������*�(6�C��������������#���#����������������'��������������&��$�$�����������������������������'��$�������#���#�����"�>���$������������������*���������*�������������'��$�������#���#����������������#������������������*����*��������#���������"�/�������������$������������#��������������*������$����������������**��������������*�������%���������"����������!����������$���������#�����������*����*�����������#��������%������������������������%����������������#��������������,��"���������#���������������������������*����������������������#����������*����������������*����������#�������$����������#������%������������*�������������������#������������*������"
6" (���&���� ��������#�������������#�������������������������&��������������������%����"
�" (���&�����(���������!��������!#��������'�����"
<" (���&��4(��6GGG������������*�������#���6�GGG�#�������"
3����������� ���������*�����#������������������������#����%��������**���������%��������$���������#������������������'��6GG����'���%����������������������%������������������*�����(6�C�������������"
=" /�#��JN�6GGK"
�
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM28
QUICK-START TUTORIAL 29
-" (���&�������#���#���������#��$���������������&�'���#��M6DD<M(6�C"
B" (���&����"
C" (���&�>H"
�" (���&�����F�������*��������#��$���������������&(6�CM(�MH"
<" (���&�����3��$���'�����"
=" 4���%�����������!��������*������������#�J(6�CM���K��������4����*����"
������������#��������������*����������������������������"
�
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM29
30 USING ARCGIS 3D ANALYST
Viewing the interpolated surface
4�$�������������*��������'���������������������������������������������������$��������$�����������%�����������������*�(6�C"�+���$�������$��������*�������#���#��������$�������$����������#�����'�����������������#�"
6" ��%�������&�(6�CM������������&�7��#������"
<" (���&�����3����I��%������'"
�
�
�
�
-" (���&�������'���%����'"
�" (���&�����(��������#����#��$������$���������&�����$���������#"
=" (���&�>'��������%����*���������*�������*���"
B" (���&�>H"
C" 2�����&�(6�CM������������'����*���������"
�
�
�
ch02.p65 05/13/2002, 11:43 AM30
QUICK-START TUTORIAL 31
4�$����������������������#����������*�����*�(6�C�������������������%�$��������������������������������"
�" ���'�������&��4(��6GGG��������5����������"
4�!�������$���������������#����������������$���������%������������*���������������"
Selecting features by an attribute
�����������������#����������*�����������#���*��������*���������#���*���*�������"�+��������������*�������������������'�����������������'�������������'���������'������&��%������$�������������5������������"�+���$���������������#���������������'�������'�������*������������������$����������%���������"
6" (���&������������������&�������3�� ����'����"
-" (���&�����:��������#��$������$���������&/������(����������"
�
�
�
ch02.p65 05/13/2002, 11:43 AM31
32 USING ARCGIS 3D ANALYST
<" (���&�����OP�'�����"
/�����������$�������%���'�������������������������������������"
Viewing the attributes of features
+���$�����������%���������'������*���������������������������*����������$�������������*������������������������������������������"
6" ��%�������&�/������(�������������������&�>#�� ����'����/�'��"
=" /�#��JG"=K"
B" (���&����������������!#�����������9���'����"
C" (���&� ##��"
E" (���&�(����"
/���#����������������$�������������������������%�����������G"=�������#���6�GGG�������$����������������������"
�
�
� ��
ch02.p65 05/13/2002, 11:43 AM32
QUICK-START TUTORIAL 33
-" (���&�������������'�����" <" ��%�������&�( ���������&����������"
�
/�����'�����$����$�������������*������������������������"
�" ��%�������&�( ���������&����� �������%"
/������������#�����������������������������������%����������'����*������"
�
� �
/������������'����*����������������������������*66�#�������������������6CB"
=" (���������������������������������%�'�!"
ch02.p65 05/13/2002, 11:43 AM33
34 USING ARCGIS 3D ANALYST
B" (���&�����4���%����'��������������&�������������"
+�������$��&���� �������$��������������'������'������#��"
C" (���&���������'�����"
�
���������!���������������������������*����������!������#�����*������������������#�������������������*����*����������*������#�����"�+��9������#����������!����������������������������*��������������!#���������������'������*���������������"
ch02.p65 05/13/2002, 11:43 AM34
QUICK-START TUTORIAL 35
Exercise 4: Building a TIN to represent terrain
/�����$���*�I�����(�����H�����&����������������'������������������������������������������*�����&��%�$����������������������#�$���*���������$�"�2�*���������������%�����$����������*��$��������������$���#��������'��������������������������$��������#�������������*�������$��������������&�����"�����������%�����������������������������������������*����������������������������������#'��$�������������#����%�������������$���������������������������������'��$�����#������*�������#�������������������������*�����%�����$�����������������'���$"
/���&���������������#��������6DED��*�����$���%�������$�%��*����������������Q������**������*�����(������������5������������������ ��������(����(����������� ������������ (( �������%�����$���������������������������������'������������"���������$��#������������������������������������������'������ (( "
(���������$���#������������������*����� (( "
Viewing the cave and the landscape
5���������$�����#�������3����/�4��������������$��������������������������������������������"�+��9������������������������������������/�4��������#����������������������������������� �����������������#��*�������������������$�"
6" (���&�5������������&�>#��"
-" 4���%�����������!������<�*�������������'�������&3����/�4"�!�"
/����������#�����������������������������������*�����������������������������#�������������#�������������*�$��%��*�������������������"����������'����*��������������������������������������������'������������**"
�
�
ch02.p65 05/13/2002, 11:43 AM35
36 USING ARCGIS 3D ANALYST
�" (���&�����'�!�������$�����(���������������" 6" (���&���� ��������#��������(�����@)���*��/�4����������&(������/�4�5����5�������"
<" ��%�������&�(������������������&�F����/��:����"
/������������������������������*�7�������F�*��������$��������������������������$��������'���������������� ����������'���������������%�������"�/�����##����'��������������*����������'������������*������������������������$��$����������*����������������*�G"
���������!�����#������$����'�������/�4����#�����������'������%����*���������������������#������*�������$�"
Creating a TIN from point data
+����������#��������������������#������#����"�/����������%�����������*�#������$������������'�����������7>/���������������������������������&������������#�����"�+��9�������������/�4����*����������*����������#�����"
-" (���&���#������#����"
/���7>/�*�����������##������������I��%������������#��$����������������������$����'�������%��������������#�����"
�" (���%��������*�����#������������������$�/�4�$����'����������������!�������<;/����������;�*�����"
<" (���&�>H"
�
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM36
QUICK-START TUTORIAL 37
/���/�4����������������������������������"�4�����������������$���'��������(���������������8����������������������������/�4���*��������'�������%��"
6" (���&���� ��������#��������(�����@)���*��/�4����������& ���5����������/�4"
�����������/�4������*������%�����������*��������*��������������&�������������������'�������%�����������*�������"
Adding features to a TIN
4�$�����$�������������������*��'���&���������������##���%����������/�4"�+��9��������������������*�������������*�'���&��������������9���'����#�������������������*����'��$��9����*��������������#���*��������*���"�+��9����������'�&������*����������������'���&������$�������������������������*�����������#���*��������*���������������������9��������������������"�5������������$����������������#�#���%���������*�����#�#���%����������������������*����������%���*����/�4"
-" (���&���������"
�" (���&�����I��%�������������#��$������$���������&R����O"
<" (���&�����/����%������������#��$������$���������&���*�����"
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM37
38 USING ARCGIS 3D ANALYST
=" (���&�'�&�����" C" (���&�����I��%�������������#��$������$���������&R����O"
E" (���&�����/�%�������*��������#��$������$���������&R����O"
+����������*���������*�����������������������$������������������/�4������#���*������$�������������'������%�������������������%�������"
/��� ���5��������/��/�4������������������������������:? /�>4�*�����������������*����������%���������"�+��$��������#��������*��������������%������������������'���&�����"
B" (���&�����#"
D" (���&�>H"
�
�
�
�
ch02.p65 05/16/2002, 11:26 AM38
QUICK-START TUTORIAL 39
/�����$�*�������������������������/�4"
+�����������������������������*����$����'������������'���������������$�����������������������*���"
Setting features’ base heights from the TIN
4�$�����$������������'�������%����*������������������������*��������*����������$�/�4"
6" ��%�������&���������������&�7��#������"
-" (���&�����3����I��%������'"
�" (���&�>'��������%����*���������*�������*���"
<" (���&��������#��$������$���������&����6"
=" (���&�>H"
/��������*��������������$����#������������/�4����*�������������������"�4�$�����$�������#��������������*������������� �������*���"
B" ��%�������&������������������&�7��#������"
�
��
�
�
ch02.p65 05/13/2002, 11:43 AM39
40 USING ARCGIS 3D ANALYST
C" (���&�>'��������%����*���������*�������*���" /������������*��������������$����#������������/�4���*��������������������"�4�!�����9������#������������#��������������/�4"
Setting raster base heights from the TIN
��������%������������#������*�������$�����������������&�����������������#�'��$�����������������������$������������������"�+��9������#����������������������/�4�������&����#�����������#�����������������9���'���'������������������'������� ���� ���*���"
6" ��%�������&�#����"��*���������&�7��#������"
E" (���&�>H"
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM40
QUICK-START TUTORIAL 41
-" (���&�����3����I��%������'" B" /�#��J�GK��������/����#��������!��'�!"
C" (���&�>H"
E" (���&�#����"��*"
4�$������������#���������G�#������������#�����"�+�������������%��#��������*�����/�4����������#�����'�����������/�4��������#����������������������$��%�#�������"��*����$����������/�4����'������'���'���$�����#�������������������%���������$��%�#�����������6G����$��������������������%��'��*�����/�49��:�����7��#������������%�'�!"�+��������������**��������'�������%����*�����/�4��������#�����'���������������"
Cleaning up the scene
/���������#��������������9���������**���������������������������%����������������&�������������������'������%��"
6" 2�����&���#������#����"
-" 2�����&�'�&�����"
�" 2�����&����6"
<" ���'�������&�������������'���*�������(���������������"
�" (���&�>'��������%����*���������*�������*���"
<" (���&��������#��$������$���������&����6"
=" (���&��������#������'"
��
�
��
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM41
42 USING ARCGIS 3D ANALYST
=" /�#��J=K��������������'�!" 6" (���&�����:������ ��)�#�'�����"
B" (���&�>H"
4�$�����������������������������������#����%����*�������������'��� ���'������&������"�/������*����*����������������������#�����#������������!���������������������������������������#��*�������������������$�"
Creating a profile of the terrain
/��������*����$�������������*����������������"�/��%�����������������%��*��������#���*�����������������$������������#��*���������������/�4"����������������������#��*�������������*���������������������*����������%��#����"�+���$��������� ��)�#����#������/�4����������#��������%��� �������������&�������#��*���"
��)�#� ������"
-" (���&�>H"
4�$�����$��������������� �����������'������ ��)�#"�/�� ��)�#���� �����������'��������������*�$�������������������##����������� ���������� �����������'��"�/$���*�������������������#������:�����������������(������7��*�������#�������$���������$�����������������������#��*�����*�������*���"
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM42
QUICK-START TUTORIAL 43
�" ��%�������&���������*����� ��)�#�����'������������&��� ������"
=" (���&���� ������"
B" (���&�(����"
/������ �����������'����##����"
<" (���&�/�������������&�!��������"
/������ ��������!��������������'���"
C" ������� ���������'����*�������������%�������&����6��������&�(�#�"
�
�
�
�
�
ch02.p65 05/13/2002, 11:43 AM43
44 USING ARCGIS 3D ANALYST
E" ������� ��)�#���'����*�������������%�������&�:�������������&�7�����:�������"
66" (���&���������##�����*����������*�����/�4�����%������������������$�����%������������������'�������&�������#��%��� ��%"
�
D" ������� ��)�#���'����*���������������&����6"
+����������������#��*��������%��������$�������������������%������'�������������������9���Q������&�����������%������"
6-" (���&�����(������7��*�������#��'�����"
�
6G" (���&����������#������:����'�����"
ch02.p65 05/13/2002, 11:43 AM44
QUICK-START TUTORIAL 45
/���#��*����%��#������������" +���������������%��#�����������������*�������#"
6=" (���&����������?��$�'���������������������������$"
�
+�������������������������'�����������������#��#��������*����%��#�8���������������#����������!#��������%��#�8����������#���������������#'����8����������������$�����%��#��������������"�+���������������#�������������%��#�"
6�" ��%�������&��������7��*�������#��/�����'�����������&��$����:�����"
6<" (���������#��*����%��#��$����$"
Creating a line of sight on the terrain
�������$����*�������������%���������������������������������*���%��"�:������*���%������$�$����#������*������*�����������'�������$����#��������������������%��������*�������'�������#�������������%���#����"
6" (���&�����(������:�����*��%���'�����"
� �
�
ch02.p65 05/13/2002, 11:43 AM45
46 USING ARCGIS 3D ANALYST
-" /�#��J-K��������>'��������**������!��'�!" /���������*���%����������������"�/���%�������%���������$�������������������'���*���������'�������#����8����������%�����������������*���������'������"
/���������*���%���$����'�������������������$�$����������'���*��������#���#��������*�����'��������$��������������������� �������*������������������������"
�" (���&�����������������#���*�������%�����������������##�����%���#�����*�����/�4�������'�������#����������%������������������$�����%���#���������������������������'�������������%���#�����"
<" (���������:���>*�%��������%�'�!"
�
�
�
ch02.p65 05/13/2002, 11:43 AM46
QUICK-START TUTORIAL 47
:������*���%������&��������%��#���������������'����#���*���� ��)�#���� ������"�4�$�����$������#��'����������������9�������������������������"
=" (���&�������������&������� ����������"
C" ��� ������������&�������������&�7����"
3�����*�����������������������������������"
B" (���&�������������&�(�#�"
/�������������#��������������������"
�
�
�
ch02.p65 05/13/2002, 11:43 AM47
48 USING ARCGIS 3D ANALYST
E" ��� ������������&���������'�����" /������������������������������������#����*��������&������������$������� ��������������$�����$� ��(�����%� ��)�#������ �����������'���������%�����"�/����������%����#�������������'��&�������������������������������*����&���������������#�����$������� ������"
�
D" ��� ��)�#������&�5������������&�!��"
6G" (���&�4�"
ch02.p65 05/13/2002, 11:43 AM48
QUICK-START TUTORIAL 49
Exercise 5: Working with animations in ArcScene
���%�������������$����������������������������,��������$��%�����*��%����*�����'Q������������������#�"�+��9������������/�4�������������#������%�����������������$��������"�+�����������������������#��������%�����������%�#�������������������'������������%����������%���"�+�����������������������#�����%���������������������������$�����&��%����������������������#�������*������������������$��%��$�����������������*���"�+���$������������&��������������#����������'�������%���������������������"
/�����������������������������'���������'������������������������������� ��������"�!�"�+���$�������� ��������������������������**��������������������#����������$���������$"
�����$�����##���������������*�)�������(�����$�������*)�������������!��������>**�����*�������������� **����"
���������!������������$����#��������!�����%���������������������������������5����� ��������M "�!�������#��*����������&����#�����������������������������������"
Opening the Final Animation_A scene document
���������������������$����#����������������������������������������*������**�������������������������$����������������� �����"
6" ��� ������������&�5������������&�>#��"
-" 4���%�����������!������=�*�������������'�������&�5���� ��������M "�!�"
�
/�������������������%��%��#������*����������������������#�������**���������������'�������'����������&�������������"
�
ch02.p65 05/13/2002, 11:43 AM49
50 USING ARCGIS 3D ANALYST
/�����������������$������*��%����*�����#�����������������*����*����%��'Q�����25>������������������"
�" (���&�����7����'�����"
Playing the scene�s animation
���������������$��������9������������������������������������ �������������'��"
6" (���&�?��$��#��������/���'�������������&� ��������"
/��� �������������'����##����"�4�$����9���#����������������"
-" (���&�����>#��� ���������(��������'�����"
/�������������#�����������������%�������*������**������������������������������������"
���������!��������������$����$��&������%���������#�����������&���������������&����������"
�
�
�
ch02.p65 05/13/2002, 11:43 AM50
QUICK-START TUTORIAL 51
Opening the Animation scene document
6" ��� ������������&�5������������&�>#��"
/���������������������������#�����������������#�%��#������#�������������������������������&���������������"
-" 4���%�����������!�������=�*�������������'�������& ��������"�!�"
�
�
ch02.p65 05/13/2002, 11:43 AM51
52 USING ARCGIS 3D ANALYST
5������������&��*�����������'Q������������������������������%��$������������$����������"�4���%����%��������������%����������#��#��������������������������#�������"
������������#����������������#����'��$���&��*�������������9�������������#�������������$������&��������&���������$�����������"
-" ��%�������&����25>"������������&�F����/��:����"
��������������������9��������������������������������#����&��*���������#��������&���#����'��&��������������������������������������������������"
/�����������������#����*�&��*�������������������������'���������������"�/���*�����������������&��*����"� �������&��*�������������#������*��������$�������������������"�/������������������&��*��������������#������*��������9�#��#������"/�����������#�������������&��*������$�����������#��#��������*��������"����������������������$���������������#�������������*�����������*��������&��*�����"
Capturing Perspective views as keyframes tomake an animation
/������#�����$��������&����������������'����#�����%����$����'������������&��*�����"�/�����#���������$��������#�������*��������#���#������������������������#�������������"�/��������*��������������������*������������������&��*����"�H��*���������������������#��������������#�����'��$�������������&"�+��9�����������������*�&��*����������&���������������&������$�������$��������������'��$���#�������*����������������������������"
6" (���&�����(�#�����?��$�'������������������������&��*��������$��%�����*�����!������*����������"
�
�
�
�" (���&�����(�#�����?��$�'������������������������&��*��������$��%�����25>������"
<" (���&�����5����!�����'������������$�������������"
�
ch02.p65 05/13/2002, 11:43 AM52
QUICK-START TUTORIAL 53
E" F�������:�����������:�&�"=" (���&�F��������������4���%����������'������� �����������I��%������������������������������*���������$"
�
�
�
�
B" (���&�����(�#�����?��$�'������������������������&��*������*������I��%���"
C" (���&�����5����!�����'�����"
D" (���&�����(�#�����?��$�'�����������#����������$��*:�����������:�&�"
6G" (���&�����5����!�����'�����"
ch02.p65 05/13/2002, 11:43 AM53
54 USING ARCGIS 3D ANALYST
/�����#���������$������Q������������������������������*�������&��*����������������������&"��������������&���#�������������$���������������������'��$�������&��*�����"�4�!������9���#�����������������������&"
Playing back your animation
+���$����#����'��&����������������%����#������������������'�����������������*����������������������������?(��"
6" (���&�����>#��� ���������(��������'�����"
�
�
�" (���&�����7����'�����"
�
-" (���&����� �������������'����������%�������������$�����*���������*�����������������$��9��'���&���������$��*�����������������"
���������������#������'��&�'�������#������%�����������#��������'��$��������&��*�����������������&"�������������������������������$����������������������%��������$��������#�����"
ch02.p65 05/13/2002, 11:43 AM54
QUICK-START TUTORIAL 55
Clearing an animation
�*�����$���������������������������������������������&������������"���������������������9������������������&������Q������������������������#�������������������"
6" (���&� �����������������&�(����� ��������"
�����������������&��������������*�������������"
Recording navigation
�������$��������������������������&�*�����������������������������������������$�������������%��������������"���������������������$�������������������$��*�����������$������������%��������%�����5�������"
6" (���&�����5�������������������%����������'��"
/���5������������$���������*��������%�������������"
�
�
-" (���&������������'�����������������������%���������%�����"
�������'�%������������%��������������������&�����������'�����"��*��������9������%������%����$������������&�$������*���������"
�
ch02.p65 05/13/2002, 11:43 AM55
56 USING ARCGIS 3D ANALYST
�" (���&���������������������*���������������������������5������"�+���������*����%�'���������%�������������%�����"
�
=" 7��������������#�*����%"
+���������������#�*����%�'������&��%�������������#������ ���"
B" (���&�������#�'���������*��������������%"
�
�
�
���������������������$#�����*����$������������"�7�������������������������$����������&"
<" (���&��������������'�%���*����%������%�����������"
7��������������������������$�����������"�(���&��%���������������������#����������%�������&������������������#���"�+�����#�������������������������������'�����������$�����*����������*����� �������$����$"
+����������������������*��%���#���������%������������������$������������&������'�%���$������������&�������������'����������������$������������&���������#'�����"
C" (���&�����5����!�����'�����"
�
E" (���&�����7����'���������������������������������������"
ch02.p65 05/13/2002, 11:44 AM56
QUICK-START TUTORIAL 57
���������������������$��%������������������������������������������&��������������&����'�������������������!��������"
D" (���&� �����������������&�(����� ��������"
Making a camera track from 3D bookmarks
�������#��������������������������%���������������������������&��*���������'������������������&"� �������$����������������&��*������*����������������&���������#���'��&���&���#���#����������$���*��������"��������������������9����������&��*������*�������'��&���&�"
6" (���&� �����������������&�(������H��*����"
�
ch02.p65 05/13/2002, 11:44 AM57
58 USING ARCGIS 3D ANALYST
-" (���&�����/�#�����#��$������$������������(�����"
�" (���&�4�$���������������$�����&"
<" (���&�>H"
=" (���&�(�����"
B" (���&���#����*����'��&���&"
C" (���&�������#����*����'��&���&����#��$������$��������&������I��%���"
�
�
�
�
�
�
�
+��9�����$����������������������&�$��������������&��*��������$��%�����*�����!������*�����������"�+��9�������������������&��*������������������&������������$������$����������"�4�$�����9�����#����'��&���&���������������&��*������*�������������*��������������"
E" (���&�(�����������&�������������&��*�����������������&"
D" (���&�������#����*����'��&���&����#��$������$�����������:�����?��������"
6G" (���&�(�����������#���������'��&���&������&��*����"
66" (���&�������#����*����'��&���&����#��$������$��������&�H��%�������"
6-" (���&�(�����������&������H��%��������&��*����"
6�" (���&�������#����*����'��&���&����#��$������$������������������&�>������$"
6<" (���&�(������������������&��*��������$��%�������������"
ch02.p65 05/13/2002, 11:44 AM58
QUICK-START TUTORIAL 59
6=" (���&�(����"
6B" (���&�����7����'�����"
�
�
/��������������&�#�����������%�����������������%����������*�&��*������������#������*�����!�����%���'��&���&�"
Switching the visibility between layers using agroup animation
4�$����������������!#������������*�����$������������������������������������&�*����&��*����������9�����������$�������%������$����������������������������#�����������%���������"����������������������$�����$�������������������������#��������������������������������$���**������$�����*��#��������%������������"
6" (���&� �����������������&�(����������#� ��������"
ch02.p65 05/13/2002, 11:44 AM59
60 USING ARCGIS 3D ANALYST
-" ����������%���#����������������%������"
�" ���������5����%������������'����'������,��������*�����$�����������%��"
<" (���&�3������������$����*����%"
=" (���&�>H"
�
�������������9��������������������������&����������*�������&��*����������#����������������������������������&�����Q�����������"�I�$�����������������#����������������&�*���#�����%"�+��9�������������!�"
Using the Animation Manager to disable a trackfrom playing
/��� ���������)���%�������$���������������������#��#��������*�������������"���������������������9���������� ���������)���%���������#��������������&�*����#�����%"
6" (���&� �����������������&� ���������)���%��"
�
/�������������&�����Q��������������%%������������'�������*�������������������������������#��%��������'��$�������"�/��������������������%����������*����$�������$���������'������%�'��$����������������������#��%�������"
B" (���&�����7����'���������$�������������������"
��
�
�
ch02.p65 05/14/2002, 7:37 AM60
QUICK-START TUTORIAL 61
-" (���&�����/���&����'"
�" 2�����&�(����������&�6"
<" (���&�(����"
�
�
�
�
Using Animation Controls to adjust the playbackduration
6" (���&�>#�����"
�
�
�+������������'�������������������&"�4�$����$��������#������#�����*��������������"
=" (���&�����7����'�����"
/�������������#������%�������������$��%���������������&����������"����������$�������������������������*������������������������%"�+���������������������������*��������$���������������������#�����"
-" /�#��J6GK�������������������!��'�!"
�" (���&�>#��������������������#��������*����������%�'�!"
ch02.p65 05/13/2002, 11:44 AM61
62 USING ARCGIS 3D ANALYST
<" (���&�����7����'�����"
�
-" ��%�������&�5��%���7�����#���������������������������&������ ��"
�
�
/���������������$�#����������,���&��"
Moving an object along a predefined path
>����*���������%�������������������$�����������������������'Q���������%���������"�+����������������������������%���������������������������������%����������������%���#���*��������&"
+����������������������������������%����������������*����������%��#���"�/��������������������%��#����������$�����������25>������$���������������%�?������3���������"���������!�������*����#������9���*�������������25>�����%�����#�*������������$������*��%���#���"
6" (���&�5��%���7���"
+��������������������������5��������������������#������������������������#��������$����������"� �#������������������*���������%�����������������*���������%��#���"
�" (���&� �����������������&�)����:���������%�7���"
�
ch02.p65 05/13/2002, 11:44 AM62
QUICK-START TUTORIAL 63
<" (���&�����:��������#��$������$���������&�25>"���"
��
=" /�#����?���������**�����*�JC=K"�/����$������&�������'Q���
�##�������*����'�����������*���"
�������������#���������������������*�*��%����*����'Q�������������������#����������%���#����'����&��%�����'Q����#���������������������������������%�����'��������%���*���������������������*����$����'��&��%"����������!�����#�����9�����*�����������*�������25>������"
B" (���&�>����������������%���������*�����������9��#�������$�������9����������"
C" (���&�(���������*����#��������������������������9������'������������#���9�����#�"
E" /�#��J6K������������*�����"
D" (���&�>H"
6G" (���&���#���������#���������������������������*��%���#���"
�
�
�
ch02.p65 05/13/2002, 11:44 AM63
64 USING ARCGIS 3D ANALYST
/���25>�����������������%��������������#���"�/�������������������������������*�������&��*������������������������������&"�4�$����9�������'�����������&�������������#������������������Q��������25>�����&����#�����"
66" (���&� �����������������&� ���������)���%��"
�
�
�
�
6-" (���&�����/���&����'"
6�" 2�����&�����#������������)����"
6<" 2�����&�����#������������7����"����"
6=" 2�����&�����#������������/�#�"����"
6B" (���&�(����"
6C" 2�����&�5��%���7�������������**���������'�������*����������"
ch02.p65 05/13/2002, 11:44 AM64
QUICK-START TUTORIAL 65
6E" (���&�����7����'�����"
�
�
�
�
/���25>�*���������%�����#�����������������"�4�!������9����������������������%���#����*�����#���"
Creating a camera flyby from a path
+�������������������������%���*��%���#����������������$������Q����������������������%���#���"�4�!������9������'�����������&�������������������������#�$�������������$����#����������������������25>�������*����"
6" (���&�5��%���7�������&��������������������������*�������#����������������������������������&�5��%���7���"
+��9���������������������������������#����*����������������������������*����������������$����%����������'����������%��#�����*����$�����������$�����25>��������������������"
-" (���&�?��$��#��������3��&���&������������&�25>"
�" (���&� �����������������&�(������5��'��*����7���"
ch02.p65 05/13/2002, 11:44 AM65
66 USING ARCGIS 3D ANALYST
=" (���&���#���"
B" (���&�����7����'�����"
<" (���&�����������#�����������������#����"
/�����#���������������'����������25>�����������������%����#���"
C" 2�����&�����/�#�"��������&�'�!������&�����������#���������'��"
/����������������#�����%�����,���&��"�4�!������9����������$������Q���������������������������������������#�����%�����������������������**���"
E" (���&�>#�����"
�
�
3��������&��#���"�/���25>����������������������������*����$���������������"
�
�
�
ch02.p65 05/13/2002, 11:44 AM66
QUICK-START TUTORIAL 67
D" /�#��J�GK�������������������!��'�!" Saving an animation in a scene document
+��������������������������&���������������������"���������!�����#�����9��������������������������������������������������"
6" (���&�5������������&����� �"
6G" (���&�>#��������������� �����������%�'�!"
66" (���&�����7����'�����"
4�$���������������#�������������$����������25>�*��������������������"
-" �������5�����������!��'�!����#��J ��������M "�!�K"
�" (���&����"
/�����$����������������������������������%������������������&�"
� �
�
ch02.p65 05/13/2002, 11:44 AM67
68 USING ARCGIS 3D ANALYST
���������!���������������������$�����������������������#���������������������#�����'������������� ���������"�/����������������������������$�����*��������%�������%������������%����������"�5����������*��������������(��#����E�S ��������9"
ch02.p65 05/13/2002, 11:44 AM68
IN THIS CHAPTER
69
Creating surface models 3• Representing surfaces with
rasters and TINs
• Creating a raster from points
• Interpolator assumptions
• Raster output controls
• Creating a TIN from vector data
• Modifying a TIN
• Creating a TIN from a raster
• Creating a raster from a TIN
��� ����������������$��&�$��������������#�������������*�����$�����$����#���*����*����������0�������������/�4�"�+������������!�����%��������������������������������$��*���������������*�������������"�/����$���������������*��������%����*���������������'�������#�����������������%�������"�+�������������*�����������������#�������������������������%��������������������%������#������H��%��%������4�������4��%�'���������#�������"�+������'����������%����������*�����'���������%���/�4����'�������%����������������!�����%�/�4"�+��������������������'��$����/�4���������������*����������"
ch03.p65 05/13/2002, 11:45 AM69
70 USING ARCGIS 3D ANALYST
What are surfaces and surface models?
����#���� ������� ���# ����#�"����������!���"����"����� �# � ����!1���#�� ���>�8�����!���3�� ���� ��������������������<����#����!���"���� �����"�� �3���� ! �������#�����3����������� ��#������� ��������! ���>�����#�������"�����!��1��������������������&:�� �� ���������:� !��� �����3�3&��� ����������!3������������#�������������������>
)����������#�������� ������ �# � ����!1���#�� ���3� �� � !��� 1�����!��������������������&:"��������"����� ��>-�#����!���������������������#���� �#�!�� �� ����?*->����#����!��������� !���������#����1����, �������!����#����"��������� ##������� ������������#������������� �������� ������"�����1�������������� ���>
Raster surfaces
9��������#��������������������� ���� ��#�!��>����� ����� ���#��������������������#�� #�!����������������� ���&:"����>�����!���������������3��������������������� �������� � ��#������ �>
Surface model of chemical concentration across an area withpoints showing where the concentration was sampled
Higher precision grid Lower precision grid
Grid in perspective view
������������������������#���#����!���� ��������������*+�>9���������������������#������������������ ��#����� ���� ����!������� �����������"����>��*+����������������#������������#� ������������������ ����� �,�����#�!��������,�#��� ������� ���&:"����������������������>
@������������� �� " ����#������F#�����!���3������!! �#���!��� �F����!������� ��������������� &��#������� �������>
9�������������������������� !������������!�� ���� ������>
ch03.p65 05/13/2002, 11:45 AM70
CREATING SURFACE MODELS 71
Nodes and edges of a TIN Nodes, edges, and faces
TIN in perspective view
TIN surfaces
�*+����� ���#����������������&:"����3����������1���������#�!���� ��3���"������ ����� �������#�����>����������� ��*+������1��������������������� � ��#�� �����#������������������� !����������� ��������#���3��������� ���� �����������!�����>
���� ����#�����������������������*+���!� �� ��������!��� � ������������������ �������*+>��� �����������*+��������"������#��������� � ��#����� ����������� ��� !���������!��� �������"�����1�������,����� ���>�@���� ���������� ������������#�������������#���F������!��� �����,�3�����3����������!�F1��� ������!���� ���#��������������*+>
�*+�!��������������� ������"� ��1�����������������#����!���������������1��!��������� "����1 �������������>���������#1�� � ��������������������1��� ��3����������� ����*+���������1��������## � ��������������� ���������������1������#��� ���!�����������������>
�*+��������� ����������#��� ������� � ��!��� ���#��!����������3�������� ����� ���� ������� ��� ��3������������������#�1����������������������� ���#����� !��� ������3���#��������3����"�!�>
)�������������������1��������� ����������"���������#���3�*+��������"����� ���������� �� ������������������#���� �� �����"�� �1�����������!������� �� ����� ������������������� �� ����������������������"�� �1�����#������ �������>
ch03.p65 05/13/2002, 11:45 AM71
72 USING ARCGIS 3D ANALYST
Creating raster surfaces from points
-�#�����#���� ����������������������������#�!���!������,������� ������������������>�8�����!���3����� ���������������������������� ��� ������� ������1�����������������������#�����#���!����������� ���������>���������� �����#���� ������������ ��#�"����>
What is interpolation?
*�������� ������ ����"�����#�������� �����������#�!���� ! ����!1���#���!���������� ���>�*������1������������ ����,���"�����#������������� ��� ������� ����"�� �3��� �#���3����! ������������ ��3�� �����"���3��������>
����������������������"��� ! ������������� �� ��>�8�� �������3� # �� ����� ��������� ���#�����������3����������� ���� ������ ����"���#���# ����������� �� ��������� ��������������� ���#����������>�@�����1����������� #� ��������� �����������������������# ������� ����1������������#������������� ��������������>
Why interpolate?
% � � ����"�������� �� ����������������!������������ ���3!��� ���3������������ ��#�������!���� ��������� ## ����������� "�>�*������3�� ����������!���� ����� ������� ������1����������3����������� �����"��������1����� ������������������� ��>�*����� ��������1��� ���������!��3�������� �����3������������������� �������� � ����� ���3���������� �3��!��� ����!�����!����>
����� �������#��� ��� �������� �� �����������������"�� ���#����#�!�������#���!����!�����!����>������� ������������������� ���������������"�� ������1����!������>�����"����1������������� ����� ������������ �����1�� �������� �>
High
LowOn the left is a point dataset of known values. On the right is a rasterinterpolated from these points. Unknown values are predicted with amathematical formula that uses the values of nearby known points.
*���� �����!�������� ����� �������������#������������������F�� �� ���� ,���� ������� ��>�;�����1��!�� �������� �����������1� �������� �� ������������ � ���� �#�!�� �� ��������������!�������F�"���������������� ���#������ �� ��������3� �� ����������������������������� �����"����������������!��"���>
*�������� �� ��1��������������!�� ����������� ������ ��� 1���1G������������� ��������������C� �����������3��� ������������ ��������� ����� �� �������� �� ��#�������������"�� �� ��������
���� ����������������#���>
ch03.p65 05/13/2002, 11:45 AM72
CREATING SURFACE MODELS 73
Interpolation methods
���������������������� �������������������������� ��� ���������� �������������������������������� ��������������� ���������� ���� �������������������� ����������������������� �!��"��������������������������� ��� ���������������� ������� ��#��� ��
$���������� ��� ������ ����%����������� ����� ���� �� ����������������������������������������� ���������� ��� �� ������� ������������������������ �� ��������� ��������������������� �� ����� ������������� ���� ��������������������&��������� ������������ �� �������� ���������� �������������� ����������������������� �������� ���������������������
��������������� ������������������ ��� ������ �������������������������� ���������� �������������������������������������������������������� ������ ����� ������� ������������ ���������������� ����������������$������������������������� �� ����� ���� ������� ��������������������������������������� ������������������� ������� ������������������� �������� ������������������������������������������������������������������������ ������������� ���� ���' ���(��������������� ���������������� ��� ������������������� ���� ��������������������������������������� ��� ����� ���������� ���� �������������������������������� �������� ����%��� ��� ��� ����� �� ���
�����������������)�%������������������ ��� ������ �������������*�������������� ��� ������ ���+ �������������� ������������������ ������ ���,��������������� ������������� �������������������������������������������� ��������� ��� ����������������������������� �� ������������� �������������������� ������ ���������� ������ ���(������ �������������� ��� �� ���������������������������������� � ��� ������������������� ������ ������� ������������������������ ������������������������������������������������� ��������*���� �������� ��� ��������-������������������������������� ��� �� �
������ �������������������������������������������� �������� ��� ���������
������������������*���� ��������� ��� ������ ���������������*��������������������� ��������������� �����. �������������������%������������������ ���������� �������� ��������� ���������������#��������� ������������� ������������������������������������������ �/��������������������� *������� ��������*����������/� �������������������� �������������������� �������������������� ������������� �������������� ����������� ����������������������������������������� �������*������������� ��� ��� ��� ��������� ����������� ����� �������������������������������������������� ��� ��# ���������������������������� ����� ������������������
������������������ ��� ������ ���������������������������� �������� ���������������� ����������������������� ������ ������������������� ��(������������ ������������������ ������������������������������� ��� �������������������� ��� ������ ���� �������������������������������� ��������������� ������������ ������ ���� ��� ����������������������� ����0������������(� ��� ���������������������� ���������������� ������ ��������������������������������� ��� ������(� ����������������������������������� ������ ������� ������������ ��%� �������������������� ����������������� ��������� �������������������������� �������������� ���������������� ���
������������������ ��� ������ ��������������������������� �/�� �� ���� ������������ ����/� ���������� ��������������� ������������*�-�������������� ������������������������������������������#���������������� ���������������������� ��� ��������������������������������� ����������� ������� ��������������� ��������� ��� ����������������������������������������������������������������1������������2������������������ ���������������������������������� ������ ��������������� ������������������� ���������������� �������� ��#��� ������� ����� �������!��"���������������������
ch03.p65 06/04/2002, 12:07 PM73
74 USING ARCGIS 3D ANALYST
Details on the interpolation methods
;#������"� ��1��� �������� ��!�����3�*��3�-�� ��3����0� � ��3�����������!������!����������� �#������������ �������� �� �����>�����+������+� ��1���!����������' ��������������� #���������������� &�>
Inverse Distance Weighted
*������ !������� �������"�����1���"���� �������"�����#���!��������� ���� ������" � � ���#����������>�������������� ��� ��������������#����������1� ������ !����3�����!��� �#�����3����� ���3 ������ �������"���� ���������>�������������"���������!���������������������������*��� �������� �>���������������2���3����9�� ������3�����)��� ���>
�������� ���*�������������������� �� # ������#�,���� ���������� �����������"�����1���������� ��� �������#�!��������� ��>�)����# � ������ �������3�!����!���� �� ����������������������� ���3�������������� �����#����� �����"��!������ ��A1��������!��B>�-��� #� ���������������� ���� "��!�� �#������������� �������������#����������3������ ��� ����!�������#���>��������#��� ��!����!!������������ �������#���>
������������� �� ���#����� �������������#������������1����������1��� ! � ��������!1���#� ����� ��������#�������� �������� ������������ ��
������������8 ���
� �����# ������� �3������ �������#�������� �� ���������3�����#������ ������������ ��3�����#������ ����� �� ������� ������ ���1����>�)������ #� �����! � !!����3������������������ #� �������� ������������!1���#�� ���� ������������������������ # ��3������� ��#������ ������ ���1�� ����������� ���������� ��!��>
������������%�� �1��
� �����"�� �1������ �3������!1���#�� �������� ��������� ������"����#����� ������������ ��3������3� ������ # ��>��� �!�,���������� ��"����#������� ������������ ��3������� �������#��� ������������������������� ������������ ������������������ # ����!1���#� ����� ���>�����"�� �1������ ���������!���������1��������#������������������ ���#� ���� ����"�� ���� �� # �������#�!�����������������>�*#���,������"��������� ������������� ��� 1���� ����� ���3���������� #����!�� !!�� ���������� ! ����������� ������ ��#����� ����>�*���� ������3� #������!1���#�� ���� �������������1�#������!�� !!�� �������#�������� �� ���������3�#������ ����� ��1������ ������������� ��#����� ������������ ��>
����������� �����������������������1�����������1���,������ ! ��������������#�� ������!����� ���>���� �������������������� ##3�� ���3����!������� ������� �� �������������>�;�������� ������!����� ������������!��� ���#�����1��� ���������������������� ��������� ���1����� �����>����� ���#�+�)��� ����� ���������� ����� �� ������ ���� # ������ �>
Spline
-�� ������ !�����"������ �����!����!�� ����#��� ������! � ! &���"��������#������"����3������ ��� �����!�����#��������������������������������� ����� ���>
�������������-�� ���!����� �9����� &����������� �>�������������� 1���1���3����������������!��� ���#������� �������!����3��� ����������������� ���������-�� ���!����>�)��!���������������!1���#�� ��������!����>
������������ ���8��1���!�����3��� ������!�������# ��������!1���#�� �������� ������������� ��#������ ����������� ��>�����!��� ����� ���������� #�3�����!������������� � �#�������1��� ������� ���3����������!�����������#���>
ch03.p65 05/13/2002, 11:45 AM74
CREATING SURFACE MODELS 75
������� ��������
����9����� &���!����������������!��3��������������� ����#����� ���"����������!���� ���� ���������!��������������>
����� ����# ���������� ����#������� ������ "�� "���#������#���� ��������"�����! � ! &�� ��������� �>������ ���������� ���3������!�����������#���>
����"�������������#���� ������!�����!���1���'�������������������&��>�������� ����"����������!���1����������$3�>$$�3�>$�3>�3�����>�>
������������
�������� ��!���������������� ##�����#�������#��������� ������������������#�����!����������!���>�*�����������������!�����#����� ���"�����!���������������� ����1�������!��������������>
����� ����# ���������� ����#����� �>������ ����������� ���3�����������������#���>
����"���������������"����1���'��������������������&��>������� ����"���������$3��3��3������$>
Kriging
*�������-�� ���A� ����������� ��B�������#���������������! � �� �� �������� ��!������1���������������� ������1���������������� ���!�������"������������� # ��!����!�� ����#�!��������������! ��������!�������#��������� �����#���>���������#�! ���#� �������� ��!�������� ����#������� �� ����!������A�������,� � ��B3��� ������1����������� �� ����!���������� ��������������� ��A������� �� ��������� ��� ���!�������!�������� ���B>�)������#�� �3��������������������� '�����"����������1 � ���#���� ��������� �� ����#���3�1�����������������" ����!�!������#���������� ��������������#��������� �� ��>
0� � ��� ��� ! ������*��� ������� ���� �������������� ��!�������"���������� "�������� �� ��#������!���������� �>�������������#�!���#��1��� ����������� ��#�!��������� �������!�#���������
�����
�A��B� ������!�������"������������������� �C
λι� ������,������ ����#������!�������"������������������ �C
��� ���������� �� ������ �C
�� �������!1���#��!�������"����>
*��*��3������� ���3�λι3���������������������� ���������������� �� ������ �>�E��"��3� ��0� � ��3������� ���������1������������������ �������1�����������!�������� ��������������� �� ������ ��1������������"���������� ����������!����!�������!�������� ���>�������������� ����������!���� ������� ����3��������� ������������ ��!���1��'��� # ��>����3� �;�� �����0� � ��3������� ���3�λι3�������������# �����!���������!�������� ���3������ ����������������� �� ������ �3������������ �������� ��� ����!�������!�������"����������������� �� ������ �>
��!�,�������� �� ��� ���0� � ��3�������,��������������� �A�B����"���������������������������A�B���!�,���������� �� ��>������ &��������������,�3�0� � �����������������:���������� �A�B���������� ��#�"�� ���!�������"�� �����#��� ������� !������������ �� ��������������F����������� ����������� �F"����3��� ����������������!����#��������� �F# �� �����!���F����A�B������������� �� ������
∑=
=N
iiiZZ
10 )()(ˆ ss λ
ch03.p65 05/13/2002, 11:45 AM75
76 USING ARCGIS 3D ANALYST
�,����"����F!�, ��������� �� �>�*�� ��1������#���������� �� �������,������� ������1������ �������0� � ����������������� �� �����# ����� !������� !������������ ������������ ��#������������������������ !����!�,���������� �� ��>
Variography
8 �� �����!���������� ���!��� ��� ������,��������������������� ����"�� ������>�*������ ���!��� ���#�������������#����!�������� ���3���� ���1�� ��� �����������#������!� � �����! "�� ���!3��!�������
-�! "�� ���!A� ��������B�I�$>��J���"�����K�A"����������� ����L"����������� ���B�M
#�������� ���#����� �������������1��� ��������>�����#�!�� �"�"���������� �������� ##��������'�����1�����������"�����#������ �������� ��>����� !����1��������������� � ���#���� ���A��������� ��B�� ������������!����������� ��>��� ����������� ����#�������!�������� ��>
;#����������� ��#����� ���������� '��� ������3��������������#����!������ ���#�� ���>������������� ���' �,���1��!���!������1��>�*�������#����� ���������� �3������� ������������ �����������>�8�����!���3��!���������"�������! "�� �����#�������� ���#�� ��������������������������($�!�����������1�������������$�!�����>������!� � ������! "�� ���!� ���������#������"���������! "�� ���!�"������������:�� ���������� ������3������3��������:�� ��A����� ����!�1���B>
D is ta n c e
S e m iv a r ia n c e
-��� ������������ ��'��� # �����1�� ���� �� ����#���������C�� �����������������������!����� ,��������� ����#������������>���3��� ���#����� �����������������F#�����#���������:�� ��#������! "�� ���!����F�������"��!���� ! ����"����F���������:�� ��#�������! "�� ���!����>������ ���#����� ��1��!��#������������F!" ���������� �����������:�� ��#������! "�� ���!����F����������1��!��!���� �� ! ���������"����� ������'������ ##������F!"�����������:�� ��#������! "�� ���!����>
ch03.p65 05/16/2002, 11:53 AM76
CREATING SURFACE MODELS 77
Fitting a model to the empirical semivariogram
�������������� ����# ����!����������� ����#�! ��������!� � �����! "�� ���!>�-�! "�� ���!�!��� ��� ����,��������1���������� �������� �� ���������� ������� �� �>�����!� ������ ��� ��#0� � ��� ���������� �� ��#����� 1���"�����������!�������� ��>�@���"���������������!� � ������! "�� ���!��" ���� �#�!�� ������������ ������������ ��#���������>E��"��3� �����������" ��� �#�!�� ��#��������� 1��� ���� �������� �������>�8���� �������3�����������������0� � ������� �� �����"���� � "��0� � ���"�� �����3� �� �������������# ����!����A >�>3������ ���#��� ������"�B�������!� � ������! "�� ���!>��1��������3��� �� ��� ! ������������ �������� �3������������ ���� �������"�� ��# ����>
-�������!��#��� ����������"���������!���3�#�����!���3������� ��������������� �������# ���������������"����##�#��������� ��������1������������ ��������A�������" �� !���B>������������" �� ���#������ �����������!� � ������! "�� ���!�#�!����!���C��!��� ���������1"������!������"�3������!��� �������1���>�)�� #������������ ������������� ��� ���1"������� ��������������� ������������� ��� ��1��������� ��3��������"���������1��� ! ���>����������������#�� ##��������! "�� ���!!������������#�!>
Different types of semivariogram models
�������������" ��������#��� ���#��� ����������#�!��!���������!� � ������! "�� ���! �� �����3�-���� ���3������� ��3�?��� ��3�����= ����>��������������!���� �#�������������� �� ��#������,����"����3����� ���������������������#�������"������������ � ��� ##����� �� # ������>������������������"�� ������������ � �3�����!��� �#������������������� ��1��� �����"������������ �� �>�����������3�����������#����� ���1�������!��>������!���� ����� �������# ��� ##������������#����!����!������������>
����� ����!��1������������!!��!��������� ���� #��������#��� ���� ##��
� ����-���� ����5���
Distance
Semivariance
Distance
Semivariance
�� ��!������������������ "�����������#����� ����������� �F�' "�������3���� ��������#���! "�� ����F�� ��!��� ������3�1������� ������������ �� ��&��>��������� ����!���� �����#�����!����!!��������!����>
� ����������� ���5���
ch03.p65 05/13/2002, 11:45 AM77
78 USING ARCGIS 3D ANALYST
�� ��!���� ������ ������������ ������������ ������������������ ������ ��� ������ ���� ������>�E����������������� �� ����������!������������������ �# � ���� ������>����������� ���!���� ���������!!��������!���>
������ ���#��� ���!��������� ������������� ��1�������������� ������������ ��#������������������ ��,��������#��������!���>
Understanding a semivariogram—the range, sill, andnugget
������" ����� ������3�������! "�� ���!���� ������������ ����������� ��#�����!���������!����� ���>�)������#��1�� ���� �� ����#���������F�� �����������������������!���� ,�F!�������� ������������������� ���������������"����!������� ##��������'���������������#������������>�;���������� ��#����� ��� ��������F�#����1� ���1 ����F��!���� ��# ����������!>���������������� ����������� �� �������������!!�������������� 1��������!����>
�����������������
��������,��������!����#�����! "�� ���!3���� ����� ����������������� ��� �����������!������"�����>������ ����������������!����# ����#���������� ��,����������������>
-�!�������� �������������1��� ������������������������������������ ����������������3������������� ���#���������������������������������>
����"��������� ���������! "�� ���!�!�������� ������������F����"�����������:�� �F �������������� ��>��������� ���� ��� ������ ���! �������������A��������#��� ������� �B>
���������
������ �����3����&���������� ��� �������A >�>3�����I�$B3������! "�� ���!�"���� ��&��>�E��"��3������� �# � ������!���������� ��� ������3�������! "�� ���!�#������� 1 �����������##���3��� ��� ���!��"�����������������&��>�*#������! "�� ���!�!���� ���������������:�� ������3��������������� ���>
�����������##��������1������ 1������!�����!��������������� ���������#�"�� �� ������ ���������!�����������������!�� �� ����"��3���1��>�5�����!��������������1������#��������� �������� ��!���� �����" ���>�+������������!������"������� �����"�����������#��������A >�>3�! �����!����������B>%�� �� �����! �����������!�����������������!�� ���� ��������� �����������������#������������##���>�)�#��������� �������3� �� � !����������� ���!����������� ���#������������#����� ��"�� �� ������������� ���������� �>
Making a prediction
����# �������,�#���"�� ������������������A��������� �B� �������������1�������!�� ����>�@���"������# � ������ ������# �������#���������3��������������� ��� �#�!�� �� ����������F��!����� �������F ��������!������������ ������������ �>;��������"���������� ������������ �3����������� ������ �� ��� �������# �����!���C�������#���3������!� � �����! "�� ���!� �������� ��>
Distance
γ(si,sj)
Nugget
Partial Sill
Sill
Range
0
ch03.p65 05/13/2002, 11:45 AM78
CREATING SURFACE MODELS 79
8���������������,3������������������ ����!�,������ �� ��>= ,��*��� �������� �3�0� � ���#�!���� �����#�!������ ��!�������"����������� �������!����������� ��>����� ��*��� �������� �3�����!�������"������������������!����������� �����"������!��� �#�����>�E��"��3����0� � ����� �����#����������� ���!�������� ��������!����� �� ����������������#�*��>�*���������� !�������� ��!1�������� ������3�1��,� � ����� ������!��#�!����! "�� ���!������������"������1���, �������������� ��������#���������>��������������� �����#������!���#��������!���3����� �� �������!����#����������� ��A�����������B� ����������������1�������������! "�� ���!������������ ����������!����#�!�������"������������������1�>
Search radius
@��������!������������������ �������#�������#�!�������� �� ������ �3�����!�������"������ �����"����������� ����������� ��� ��������,����"����#���������� ����������� �� ��>����3��������� ! ����������#����������� ���� ��� ����� �#�����>�+������ ������������������ ��� ��� ���#���������� ��3�1�� �� ��������� 1������������#����������� ���!����"��������� "�� �#������ #����������������� ����������!��� ##������������������� �� ������ �>��������������������������� ��1����� ��#���!���� ���������>������!������������������ ��1���3�����#�������������� �� �������1��!���>����������3� �� ���!!������� ������ ! �������!1���#�� ���������������������!�, ��������� �� ��1������ #� ������������� ��1���>��������� # ���������#������� ��1��������� ������#����������������,�#������!�������"�������1������ ��������� �� �>�;������� ��1��������!����������� ���������� ��������� ���1������� �� ��������������3�#�����!���3��������# �������!�� !!�����! � !!��!1���#�!������� ���������� �� �������� ��1���>
7� ���������# ���� ��#�����"�� ��� ����� �� ���������� # ���� ��1����������������� �� ������ �� ����G��� ��� ������!����# ����������! "�� ���!3������� �����#������!���������� �������1�������! ���>�8�!������� �������������"����3������ �� ������1��!����#�������,����"��������������� �� ����� �>
�������������������� ��1���������3�# ��������"�� �1��>
!"���������������
��# �������������� ����' ������� �������������! � !!��!1��#�� ���>������ �������� �������������� ��#������ �����#������ ��1����A ��!���� ��B>������ �������#�������� �� ��������3���#������� ���������������3�������� ��#������ ����������# ��� ����� ���� ��������!�>�����! � !!��!1���#� ���� �� ����������! � !!��!1���#�!�������� ��������� �� �������� ��1���>���������!�������� ���������#����� �� �������� ��� ���1������ ������������� ��#������ ���������������>���������������#�����!�������� ���� �������� ��1���������������� # ���! � !!3��������������� ��� ��� ���������� �� ��������!���������! � !!��!1���#�� ���>��������� # ���# ������������� ��� ���1������#������� ����������������A�����������B ���������������3����� #����!�������� ��������������������'����3��� ������������������3�������� ,����� ���1����� ##������!1���#�!�������� �������� ������� ##�������� ��1����#������"�� ������ �� ��>
#�������������������
� �����"�� �1������������� �3������!1���#�� �������� �������� �������"����#����� ���������������� ������ # ��3��� ��!�,���������� ��� �������"����#������� ���������������3������ ��������#��� ������������������������� ������������������������������� # ����!1���#� ����� ���>����3��!��� ��1���������1���!������������������1�������������� ������������ ���#�����!�������� ������������� ���������������>�@������������ #����!�� !!�� ������F ��!���� ��F��������
ch03.p65 05/13/2002, 11:45 AM79
80 USING ARCGIS 3D ANALYST
���������� ��������������>�*#�������� ��#�������� ������ ��1����������������!�� !!���� ��1�#���1�� � ���������� # ����!1���#�� ���3��������� �� ��#����������� ��� ��1�����#�!����������!1���#�!�������� ����� �� �����!�� !!���� �>
Kriging methods
�������������" �������,� � ���!����� �;�� ��������7� "������0� � ��>
Ordinary Kriging
;�� �����0� � ��� ������!���������������� ���������#����,� � ���!�����>�*�����!���������������!���� ���,���>��� � ����������1������!�� �������������� ���!���� ��� # �����������G������ �����!�� �>
Universal Kriging
7� "������0� � ������!�������������� �����"��� � ��������� ����������A >�>3������"� � ���� ��B����� ������1��!������1��������! � �� ��#��� �3�������! ��>��� ������! ��� ��1��������#�!������ � ����!�������� ���3����������������� �� ��!������#�!���������!������>�;�������!���� ��# ������������!������3�1�#���!�, ��������� �� �3��������! ��� ��������1��,����������� �� ������ "���!��� ��#��������>�7� "������0� � ������������1������������,��������� ���������� ��������������������� "����� ��� # ��G�� # ��� ��������� 1�� �>
ch03.p65 05/13/2002, 11:45 AM80
CREATING SURFACE MODELS 81
Interpolating araster surface������������������������ ��� ����������������������� ������ �������������������������������������������������������� ������������������������������
Interpolating usingInverse DistanceWeighted with a variablesearch radius
1. Click 3D Analyst, point toInterpolate to Raster, andclick Inverse DistanceWeighted.
2. Click the dropdown arrow andchoose the input point datasource.
3. Click the field that containsthe attribute data that youwant to interpolate.
4. Type the power.
5. Click the dropdown arrow andclick Variable.
6. Type the number of points touse as input from within themaximum distance.
7. Type the maximum distanceto search for points to use inthe interpolation.
8. Optionally, check the box andselect or navigate to a featureclass to use as barriers tointerpolation.
9. Type a cell size for the outputraster.
10. Optionally, type a name forthe Output raster. If you donot, the raster will betemporary.
11. Click OK.
Tip
What is the power?������������������� � ����������� ������� ����� ���������� �������� ������������ �������� ���� ��������� ���� ��� ���������� ������������� ������������ ����������� �������������������� ������������������ ��������� � �!�� ��"�
Tip
What is a variable radius?#�������������� ��������� ������������� ��� ��������� ����� ��������������� ����������������������� ������ �� ����$���������������������������� ����� �������������� ���
Tip
What are barriers?#����������������� �����������$�������������������$��� ���������������������������� ������ ��������� ��������� ��������������������
�
��
�
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM81
82 USING ARCGIS 3D ANALYST
Interpolating usingInverse DistanceWeighted with a fixedsearch radius
1. Click 3D Analyst, point toInterpolate to Raster, andclick Inverse DistanceWeighted.
2. Click the dropdown arrow andchoose the input point datasource.
3. Click the dropdown arrow andchoose the field that containsthe attribute data that youwant to interpolate.
4. Type the power.
5. Click the dropdown arrow andclick Fixed.
6. Type the distance withinwhich to search for inputpoints.
7. Type the minimum number ofpoints that must be includedin the interpolation for a cell.
8. Optionally, check the box andselect or navigate to a featureclass to use as barriers tointerpolation.
9. Type a cell size for the outputraster.
10. Optionally, type a name forthe Output raster. If you donot, the raster will betemporary.
11. Click OK.
Tip
What is the MinimumCount?#����������� ��������� ���������������� ����� �������������� ������� ���� �������� ����� ���������������$������������������� ������������������� ��������������� ��� ����������� ������ ��
�
�
�
�
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM82
CREATING SURFACE MODELS 83
Interpolating using aTension spline
1. Click 3D Analyst, point toInterpolate to Raster, andclick Spline.
2. Click the dropdown arrow andchoose the input point datasource.
3. Click the dropdown arrow andchoose the field that containsthe attribute data that youwant to interpolate.
4. Click the dropdown arrow andclick Tension.
5. Type a weight.
6. Type the minimum number ofpoints that must be includedin the interpolation for a cell.
7. Type a cell size for the outputraster.
8. Optionally, type a name forthe Output raster. If you donot, the raster will betemporary.
9. Click OK.
Tip
What is a Tension spline?#��� �� ��������� ���������������� ����������������������� ����� %�������������������� ���������������&����������������������������������� ��� ����� � ��� �$�&����� �� ���������������&���������������
Tip
What is the weight value?���������������� ����� � �� ����'�������������&���������������#���������� ������� �������� ��������� �� ���������� ��������������� ���������������&�����������������&�������������������� $�($�!$�� ��( �
Tip
What is the number ofpoints?���� ����������� ���� ���������������� ����������� ��������� �� ��� ���������� ����� ������ ���������������������� ��������� ��������)����*�$�� ����� ������������� ��������� ����&���� ������������ �������� ������ ���&����� ���������� ������ ����������� ��� �����&���������$����������� ����������� �� ������� ���&��������� ����������� ���������� ���������� ����������� �� ������ �������� �����$��������� ����� ����� ������� �� ������� ��
�
��
���
�
�
ch03.p65 05/13/2002, 11:45 AM83
84 USING ARCGIS 3D ANALYST
Interpolating using aRegularized spline
1. Click 3D Analyst, point toInterpolate to Raster, andclick Spline.
2. Click the dropdown arrow andchoose the input point datasource.
3. Click the dropdown arrow andchoose the field that containsthe attribute data that youwant to interpolate.
4. Click the dropdown arrow andclick Regularized.
5. Type a weight.
6. Type the minimum number ofpoints that must be includedin the interpolation for a cell.
7. Type a cell size for the outputraster.
8. Optionally, type a name forthe Output raster. If you donot, the raster will betemporary.
9. Click OK.
Tip
What is a Regularizedspline?#��������*����� ������&���� �������������� �����������������������*����� �������������&������� ����������������������� ����������������� ������������������
Tip
What is the weight?���������������� ����������*���� ����'������������ �����������������������������������������+���,����������������������������������$����� � �* ������������������������������������������������� ���������������� ��������������������+����,��������-����������� � �� �� �!�����������
Tip
What is the number ofpoints?���� ����������� ���� ���������������� ����������� ���� ��� ��� ���������� ����� ������ ���������������������� ��������� ��������)����*�.���� ������������� �������� ����&��� ������������ ��������� ����� ���&����� ����������� ����� ����������� ���� �����&��������$������������ ���������� �� ������� ���&���������� ���������� ����������� ��������� ����������� �� ������� ������� �����$��������� ������ ���� ������� �� �������� ��
�
�
��
�
���
ch03.p65 05/13/2002, 11:45 AM84
CREATING SURFACE MODELS 85
Creating a surface usingKriging interpolation witha variable radius
1. Click the 3D Analystdropdown arrow, point toInterpolate to Raster, andclick Kriging.
2. Click the dropdown arrow andclick the Input points dataset.
3. Click the Z value fielddropdown arrow and click thefield you wish to use.
4. Click the Kriging method youwish to use.
5. Click the Semivariogrammodel dropdown arrow andclick the model you wish touse.
6. Click the Search radius typedropdown arrow and clickVariable.
7. Optionally, change the defaultNumber of points.
8. Optionally, specify a Maxi-mum distance.
9. Optionally, change the defaultOutput cell size.
10. Optionally, check the CreatePrediction of standard errorcheck box.
11. Specify a name for theoutputs or leave the defaultto create a temporary datasetin your working directory.
12. Click OK.
Kriginginterpolation����������������������������������������������
���������������������������������������������� ������������������������� ������������������������������������������������������������������ �������������������������������������������������������������� ���!��� �������������� ��
"��������������� ��������������#������������ ������� ��� �������������������������������� ��������������������������������������������� �� ������������������#���������������� ���������������������������� ����� ��� ������������
$��� ���������%����������������������������&�� ���������� ����������� ������ �� ������������������� ������%������������� �����������������#� ������������� ���������������������� �����������������
�
�
���
�
��
�
ch03.p65 05/13/2002, 11:45 AM85
86 USING ARCGIS 3D ANALYST
Creating a surface usingKriging interpolation witha fixed radius
1. Click the 3D Analystdropdown arrow, point toInterpolate to Raster, andclick Kriging.
2. Click the dropdown arrow andclick the Input points dataset.
3. Click the Z value fielddropdown arrow and click thefield you wish to use.
4. Click the Kriging method youwish to use.
5. Click the Semivariogrammodel dropdown arrow andclick the model you wish touse.
6. Click the Search radius typedropdown arrow and clickFixed.
7. Optionally, change the defaultDistance for the search radiussetting.
8. Optionally, change theMinimum number of points.
9. Optionally, change the defaultOutput cell size.
10. Optionally, check the CreatePrediction of standard errorcheck box.
11. Specify a name for theoutputs or leave the defaultto create a temporary datasetin your working directory.
12. Click OK.
'�����(�%��������#����������� �������������� ����������������������� ������������������������ ������������� ���������������&� ��������������"������ ����������������� ��� ������#����������������������� �%��������#������������������� ��� ������������������ ��������������������� �����������������
Tip
Deciding on the radius orthe number of points/������������������� ������������������������������ �������� ��� ���������� ����������������� �� ����������� �������
Tip
Changing the lag size,major range, partial sill,and nugget0��%�#��� ����1���������� ����2�� �������������������&���������������
�
�
���
�
��
�
ch03.p65 05/13/2002, 11:45 AM86
CREATING SURFACE MODELS 87
Interpolating usingNatural Neighbors
1. Click 3D Analyst, point toInterpolate to Raster, andclick Natural Neighbors.
2. Click the dropdown arrow andchoose the Input points datasource.
3. Click the dropdown arrow andclick the height source.
4. Type a cell size for the outputraster.
5. Type a name for the Outputraster.
6. Click OK.
Tip
What is a NaturalNeighbors interpolation?#�3�������3������� ��������� ���� ��������3��� ��� ���&�������������� ��������� ������������������������ ������������ ������ ���������� ����������� ������� ������������������
���� ��������� ������������������������� �&���� ������ ������� ������ ��+��������������3������ ������,.������� ����� ���� ������ ������ ������������������������������������� ���������� ������ ��� �� �������� ����������� �����$����������&$�������� ��������� ��� �������������������)������������ ������������
4��������������� �$����� ������ ���������������� ��� ��������� ���� �������� ������� �������� ���������������� ������������ �������� ��
������������������ ��������� �������� �������������������������� 5-��� ����� )�������������������������� ���� ���
��
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM87
88 USING ARCGIS 3D ANALYST
1. Click 3D Analyst and clickOptions.
2. Click the General tab.
3. Type the name of the newworking directory.
Alternatively, you can browseto your new working directory.
4. Click OK.
Saving all rastersin a specifiedlocation������������ ���� ��������)*�+��������������������������������������������������������������������������%����������������������������#��������������������� ��#����#������������������ �����������
��������������������� �������������������������������������� ���������������� �������������������� ���������������������+��������������������� �%� �������� ��������������������������������������������������������������������������������������������� �������������������������������� �������������������� ��� �������������� �%������������ ���� ��������������������������������������� ��� ������
"��� ���#���������������������������������,����������������#���������-�.���
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM88
CREATING SURFACE MODELS 89
1. Click 3D Analyst and clickOptions.
2. Click the General tab.
3. Browse to the raster that willbe the analysis mask.
4. Click OK.
Setting ananalysis mask+�������������������������������������������������������� ��� ������������������������ ���������������������������������������������� ������ ��� ���������������������������������� ������������������/�������������������������� ������
$������������������������������������������������������������������������������������������ ��������������� �0�*���
$����������������������������/����������
1� ��������������������� ���� �������������2������ �������� �%��$������������������ ����������� �������� ��������� ��������������������������
3� ����������������������� ����� ��������4������ � ���+��������������������� �%��������� ������� ������������� �5������������
+���������������������������������� ������ �������������������)*�+������
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM89
90 USING ARCGIS 3D ANALYST
Setting thecoordinatesystem for youranalysis results2����������� ��������������������� ����!������� ������������������� ���������������������������� ��������������������������+��6���'�������������������������������������������������������������#������������� ������������������ ���������� �����������������
1. Click 3D Analyst and clickOptions.
2. Click the General tab.
3. Click the Analysis CoordinateSystem option you wish touse to save your analysisresults into either the coordi-nate system of the inputraster or the coordinatesystem of the data frame.
4. Click OK.
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM90
CREATING SURFACE MODELS 91
Setting the outputextent���%��� �������������%#����������� ����� ���/� ��������/������������
������������������������������%������������ �������������������+�������������"��� ���#��������%������������������������,�%��
���������������������� ������������������������� ����������78$���+��*������,9#������������������������%��������������������������� �� �������78$���+��:���,9�+��������#������������� ���������%��78+��$��� ��"���,9�
Specifying an extent foranalysis results
1. Click 3D Analyst and clickOptions.
2. Click the Extent tab.
3. Click the Analysis extentdropdown arrow and choosean option to specify theextent for all subsequentanalysis results.
4. Click OK.
Tip
Setting the Snap extent6��� ������6 ������� �������������������� ���������&���������������������� �������������������#�����&����������������������������� ���� �������*��������������������/�����������������&��������������������� �� �������*�� ������������������ ��&�
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM91
92 USING ARCGIS 3D ANALYST
Setting the cell size
1. Click 3D Analyst and clickOptions.
2. Click the Cell Size tab.
3. Click the dropdown arrow andchoose the method ofdetermining the cell size.
4. Optionally, type the number ofmap units to define the cellsize.
5. Optionally, type the number ofrows and the number ofcolumns to define a cell size.
6. Click OK.
Setting the outputcell size������������������ ������&� ���������������������������"��� ���#��������������&������������������������������&����������������������������&��� ���������&�� ���������������������������������������&��������� ���
�%�������������������� ������������&� ���������������������0����������������;��������������������������/���� �������������������������������������������������
�
Tip
Overriding the default cellsize7�� ���&��8����������������������*��� �����9��� ����������$�&���� ������������������*������������������ ��&�������&���� ����������*��� ����������
�
�
�
�
�
ch03.p65 05/13/2002, 11:45 AM92
CREATING SURFACE MODELS 93
�*+��������������������#�!����!1 ��� ��#�"��������������>�@��������� ��3�� ��3�����������#���������� ��������#�����*+>�-!��#������� ����#��������������"�&:"����3�������������#�����#������������&:"����>����� ���#������������*+�!����������� �� ����������� 1���"�������������������"��� ����������� ����*+�#������>�������!���1������� �� �������������� "����������#�� ##������ ������������� ���� #�#������3�����������������,��>
Building a TIN
@���������������*+������������#�!������!���, ����#� �������3�������������� �� ��������3����������������������# ������� �� ����*+>��*+������!����#�!�!����� ���3�1���,� ���3����������>�5����� ��������� ����� ����!�����!����C�����1��!������� �����������,>�5����� �������������� !���� ��� ������*+C�����������! �������"������������#�������#���>
Creating TIN surfaces from vector data
Mass points, categorized by height attribute
Breaklines
�*+�����������!�����������������#������## � ������1� ���� ���!���!����� ���� ��������������������#���� ��� ����"�� �1�������#����� ���������������������#���� �������"�� �1��>
)���,� ��������� ����� ������ ������ ����!�����!����>�����1��!����'������#������!����� �����������>
)���,� ������� ����������������� ������������#������3�������� ���� �����������!�3���1 ���#������3���������������>�������������, ����#�1���,� ��� �����������#�>
E����1���,� ����������������� ���� � ��� �����������#������#���>�-����!������������������1�� ������� �����*+��������1���,� ���>�E����1���,� ������������1������������ ������#������� !��"������� ���������������� ��#��*+�>
-#��1���,� �������������������������*+����������� ����#�������������������������������������#�����#���>�-��������
ch03.p65 05/13/2002, 11:45 AM93
94 USING ARCGIS 3D ANALYST
Clip polygon
1���� �������1�� ������� �����*+�����#��1���,� ��������������� ���� � �3�� �����##��� �������������#�������#���>
2������������������#����#�������� �������F���������,��F�1���� ��F���������������F#������������ ����������������>
The graphic on the left shows a TIN created from mass points; the graphicon the right shows a TIN of the same area created from mass points andbreaklines.
9����������������������1�������������� ���� ���� ������������!��"���>���������������������1��������!��������,������������������������"�����������"�����#���>
8 ������������� ������ ����������� 1���"������������ �����������#����� �� ������# ��������>�������#������ ���� ����##�����3�������� �� ��������� �����,��������>
E����������# �������������#� �� " ���� ������� �������� �����3�������1������#������������>
����������#����������#����#����������� ��� ��������3������������3���������������3�����# ���������>
�� �����������# �����1������#�� �������� �>�*�������������#������� ���#������� �������� ����������#�!���� �������� ������������ ������� ��F#�����!���3����� ����"�!��������� ��>
���������������# �����1������#�� �������� �>�*�������������#������ �� ������������������ ����������#�!���� �������� ������������ ������� ��F#�����!���3����� ����"�!��������� ��>
2�����#����������� ���������� ��������� ������ ������������'������#���������!����� �����������>
*���� ���1���,� ��������������� �����*+�� "�����!��������"�������������#������*+���#���>
��������������#������ ##������������1���,� ��������!�,�� ����*+3��!�����������#������������#�!�!����� ����������������#������������#�!�!����� ��������1���,� ���>
ch03.p65 05/13/2002, 11:45 AM94
CREATING SURFACE MODELS 95
Building a TIN��0������ ������� ������������ ��������������������������������#����#������������ ����������������� �������0�$���� ��������� ���������������&/�����#�������������� ��� ��������&/������
�������������������0���+��6������+��$�������������� �������������������������#�������������������� �����������������,����������������������������0�
Creating a TIN
1. Click 3D Analyst, point toCreate/Modify TIN, and clickCreate TIN From Features.
2. Check the features that youwant to use in building yourTIN.
You can use the browsebutton beside the Layers listto navigate to other featureclasses to include in the TIN.
3. Click the dropdown arrowand choose the Heightsource field.
You can choose shapegeometry if the features have3D geometry.
4. Click the dropdown arrowand choose how the featuresshould be incorporated intothe TIN—as mass points,breaklines, or polygons.
5. Optionally, click thedropdown arrow and choosethe Tag value field if you wishto tag the TIN features with avalue from the input features.
6. Repeat steps 2 through 5 foreach input feature class.
7. Type a name for the TIN.
8. Click OK.
����
� �
�
ch03.p65 05/13/2002, 11:45 AM95
96 USING ARCGIS 3D ANALYST
Adding features to a TIN
1. Click 3D Analyst, point toCreate/Modify TIN, and clickAdd Feature to TIN.
2. Check the features that youwant to add to the TIN.
You can use the Browsebutton beside the Layers listto navigate to other featureclasses to include in the TIN.
3. Click the dropdown arrow andchoose the Height sourcefield.
You can choose shapegeometry if the features have3D geometry.
4. Select how the featuresshould be incorporated intothe TIN—as mass points,breaklines, or polygons.
5. Optionally, click the dropdownarrow and choose the Tagvalue field if you wish to tagthe TIN features with a valuefrom the input features.
6. Repeat steps 2 through 5 foreach input feature class.
7. Click OK.
Tip
Adding the selectedfeatures to a TIN:����� ������������������� �����3���������������&���� ��������$���������� ��������� ��������3���������������������������������������������������$�� �&�������������������� ������� ������3�
����
�
�
ch03.p65 05/13/2002, 11:45 AM96
CREATING SURFACE MODELS 97
Creating a TINfrom a raster������������������������ ��������0� ������������ ��������������������� ������ �������� ����������&�����-��������������0���������������������������������� �������� ��������� �������������������������������������������������������������
'�������������������������0#�������������� �������������������� ���������0����������������������������)*�+������������������ ��� ��������������������������� ����������
Converting a raster to aTIN
1. Click 3D Analyst, point toConvert, and click Raster toTIN.
2. Click the dropdown arrow andclick the raster that you wantto convert to a TIN.
3. Type a vertical accuracy forthe TIN.
4. Optionally, check the box tolimit the number of pointsadded to the TIN in pursuit ofaccuracy.
5. Optionally, type the maximumnumber of points to add tothe TIN in pursuit of accuracy.
6. Type a name for the OutputTIN.
7. Click OK.
�
Tip
What is the verticalaccuracy?�������������������&������������ ���������� ������������3����������&���������������������� ����������������� ����������6����& �������� ����������� �����3���������������������������������������������������#������� ��������������� ���������� ����*�������� ���� ���������������
�
�
��
� �
ch03.p65 05/16/2002, 12:07 PM97
98 USING ARCGIS 3D ANALYST
Creating a rasterfrom a TIN������������������0�������������������� ���������������%������������������� ����/���� ��������0�
Converting a TIN to araster
1. Click 3D Analyst, point toConvert, and click TIN toRaster.
2. Click the dropdown arrow andclick the TIN that you want toconvert to a raster.
3. Click the Attribute dropdownarrow and click the attributeof the TIN that you want tosave as a raster.
You can choose from eleva-tion, aspect, slope in percent-age, and slope in degrees.
The TIN must have alreadybeen symbolized by theattribute in your scene ormap.
4. Optionally, set a Z factor.
5. Optionally, type the Cell sizefor the raster.
6. Type a name for the Outputraster.
7. Click OK.
�Tip
What is the Z factor?����;������������������ ��������*�� �������������������������� ��&�� �$������&����������� ��
�
�
�
� � �
ch03.p65 05/13/2002, 11:45 AM98
IN THIS CHAPTER
99
Managing 3D data 4• ArcCatalog basics
• Previewing 3D data
• The camera, the observer, and thetarget
• Displaying 2D data in 3D
• Starting ArcScene from ArcCatalog
• Creating a new 3D feature class
��(�����%�����$�������������%���������������������������$���������������%�������*�������������������"�+����������� ��(�����%������%��� ������$��&.��#���#��������������������������������������(�����%����������%����%�������#������������������������&���"�+���������������7�����$���'���������#�����������#�����$��*��������������$�����������%��#����#��������#�����$�������������%��������?��$��#����"�+�������������������������*��������-��������������%��������$��%�#��#������.*����!��#��������������������'������%���������!���������!#���������*���*��������$���� �������������������������'���"�+����������������������$�����������������������������%����������%��������������������#���*��$��������������*�������������������'�������������#������������������������%���������"����������������������������������������������%�#���#����������$�����'�����%��#������*������������"
ch04.p65 05/13/2002, 11:46 AM99
100 USING ARCGIS 3D ANALYST
ArcCatalog basics
��������������������� &���������� ������������1�������" ��>�@�����" ���������������� ��!� ������������������ �� ##����������3�� ���������11���" ��������������� ����#���������>
��������������1������������������������#���� ��!� ����������>����2��" �����1������������������������� ���� �������������� ��!>�����5����������1������������������������� ��!<��!�������>
Large Icons
List Details
Thumbnails
Catalog tree and contents of a folder connection
7�����������������1�����������������������1���������!������������>
Previewing data
;#���3�" �� ����������� ����������������1��������������������# �������� ���������#������������!��>�-!�� !��3�����3�������!��� �#�!�� �>�@�������������������� �����2��" �����1>����� �����������������13��������������������" �������>
Large Icons
List Details
Thumbnails
Browsing the Catalog’s contents
�������������� ��!�F#�����!���3�#�����3�����1����3��#�������������F �����������������3���������������1�� ���������������#������ ��!>�@������������ ��!����������� ������ ��!�F#�����!���3�#�����F����������� ���������� �����������������>�*��!�����������������!����3�!���3�������3�������1�����<������ ������� ��!�C������������������!� ����������������3������������������������!�����������#�����1G�����������!1�� �� #��������1�����������>
@������ ������������������� ��� ����"���������>���������� ������������3����1�����������-����������1��>
ch04.p65 05/13/2002, 11:46 AM100
MANAGING 3D DATA 101
@����������������� �������� �������?��������" ��>�@�����������! ����������� 1����#�#�������������������������#�����������1���� ���������1���" ��>�7��������������� ���������1��!�#�����2��" �����1�����������������������" ���������>
�� ������#��������1����������" ������������������ ����3'��������#������� ���������3�������������������� "��" ����!1�� �����������#��������>
Using metadata
)�#�������� �������������������� ����!��3���!���������������!����1�� �>�5�������� ��1��,����� �#�!�� �������������!�,��1��������� � ����1���������������������������� �>�@�����" ���!�������� ������������� �������5����������1>
5������������������ �����!������� �#�!�� ���1�������������������������3������������ �3������������������������
Metadata view
���������������� "���������������������" ����������F�������% ������" ��F������������1���������������������������������" ���������������" ��>
�>��� ��, ���#� �#�!�� ������1���� ����� �����!���������� �� �����������>�5���������������� ��� �#�!�� ���1����������� ���#���������F#�����!���3��������� 1����������#�3D View preview
Geography and table previews—the Z in the Shape field indicates ageometry that contains z-values.
ch04.p65 05/13/2002, 11:46 AM101
102 USING ARCGIS 3D ANALYST
#���������������� ����������!�#���������>������������!�� ������!� ��� ����� �� �#�!�� ��#���>
@����������������������" ������ ��!<��!��������1���� ������ ##�����������������#�!������������� ��������5����������1��>
Metadata viewed with the FGDC FAQ stylesheet
Search for data with metadata containing the word elevation.
Search
������<"��#�����������������������3���������������������� ��� ������������!�������������!����������������������������� # ��������������������1����!1� &��������������� ���������>
@��������������������������-������������������#������1������� �#�!�� �� ������!�������>
����-���������� ����1������ ���#����1����������������������#��������������� �# ���"�� ����� � ��>
ch04.p65 05/13/2002, 11:46 AM102
MANAGING 3D DATA 103
Previewing 3Ddata'��� �� ����� ��� ��� �-������ �� �������� ��/�������� ���#� ���� ���� �������� ���������� ������� ��������������)*�$����(������������������� ���������#������4�������� ���� �<�������������� ���� ��� �<����� � ��(��� �� ����������#�������)*�=������������������������)*#������������ �� �� �� �� )*�+�����%������
���)*�=�������������������������� ������� ����� ���� ��)*��$���� �������������������� ��� ���� ��� ���+��6������+��-������ �� ���� ���&�������3*���������������
Navigating in 3D
1. Click the Navigate button onthe 3D View toolbar.
The Navigate tool allows youto rotate the data in 3D, tozoom in and out, and to panthe data.
2. Click on the data and drag itto the right.
When you click on the dataand drag to the right, yourotate the data counterclock-wise around the z-axis.
3. Right-click on the 3D dataand drag down.
When you right-click on thedata and drag down, youzoom in to the data. �
Tip
Why does my data look flatin 3D View preview?��3�� ������������������*���������������� ������������&<�����������$�1� �;$1��&� �;$�1��&�� ;$�� �=�������������<�����������������&��� ������ �"����� &���������"��-����������� ��>����������������������� �����������������&������ ���������������:����� ����������&������������&"���� ��� �������������������&����������$�� ��������&����������� ������ �"��
� �
�
ch04.p65 05/13/2002, 11:47 AM103
104 USING ARCGIS 3D ANALYST
4. Click both mouse buttons—orthe center button on a three-button mouse—and drag thedata to the right.
Clicking both buttons anddragging the data pans thedata.
5. Click on the data and dragup.
Clicking and dragging thedata up lowers your viewingposition relative to the data.
6. Click the Full Extent button.
The data returns to theoriginal extent and viewposition.
Tip
Seeing the entire dataset���&����� ����������������8�� ����� �� ��������*��� ��� ��� ������ ���$����%�����4���7��� ������� �� �����"��-����������
�������&�� ��� )*���������������
������� �� ���� ����� ������������ ���+��$���
���0������ ���� ��� ���� � �������� � � ������ � � �� ��������
-����������� #�����#������������� ����� ��������������#�����#� � #���� ��������������� ��)*����#&�������������#��������������� �� ����
���������������� ��)*������ �� ������ �� ���������� ��� ���� ���� �� ��+��$���
�
�
�
ch04.p65 05/13/2002, 11:47 AM104
MANAGING 3D DATA 105
Centering
1. Click the Center on Targettool.
2. Click the location that youwant to occupy the center ofthe 3D view.
The camera, theobserver, and thetarget���������� ���� ������������,����������+������,��������� ����� ���� ���� ���� ���������� ��������������������������������������� ��� ������ �� �������'��� ���� ������� ������� ����#� ���� ��� ���������������� � ����� ��� ���!������������������
The point you clicked is the new center of the view.
�
�
Tip
Centering shortcut:����� ��� ����� ��������������� ������3�������������1������0����%�&�� �����%�������������� ������&����� ������� ���������� ��
Tip
Why change the center ofthe view??&��������$������� ��������������������� ���������������������3������� �����$�����;����� �� ��;���9�������$�� ����������������������������� ������������������������������������������ ���� ������������������&����� �����*���� ����������������������$��� ��� ��� ��������������� ���������*��� ��������&�����������������0� ��� �� ����� ������������&������������������������ ����
ch04.p65 05/13/2002, 11:47 AM105
106 USING ARCGIS 3D ANALYST
Zooming to a target
1. Click the Zoom to Target tool.
2. Click the location that youwant to zoom to.
Tip
Zooming shortcut:����� �*��������������������� ������3�������������1������0����%�&�� ����������%����*�������������� �
'��� ���� ���� ��� �� ��������#� �� ����� ���� ���������� �� �� ����� � ������'��� ���� &���� �� �� ���#������&����� �� ������� �����������
The view zooms in to the point you clicked.
�
�
ch04.p65 05/13/2002, 11:47 AM106
MANAGING 3D DATA 107
Setting the cameraobserver
1. Click the Set Observer tool.
2. Click the location that youwant to zoom to.
����� ���� �� ��� �� ������������ ��� �������� � �� ����������������������������������� ���������� ������� ������������� ���� ��������� �������� ���� �� �� ���� ���� ������� ��� �� ��������!��� ����� ��� ��� ����������� ��������� ������������������������� ��������� ����� ���� ������ �� ����� ��� ���������� ��� ��������� �������� ���� ����������������� �� ��� �� ���� ������������� ��������������������������� ���� �� ������ ���� �� ������� ��������� ���� ��� ����� �������������"#������� !���������������������������������� ����� � �!��������
Tip
Using the camera tools inArcScene�������������������� ������������������������������������������������������������������������
Tip
Set observer shortcut���������������������������������������������������������������� ����������!��������"����������
�
�
The view zooms to the point you clicked, honoring the target.
ch04.p65 07/18/2002, 11:09 AM107
108 USING ARCGIS 3D ANALYST
Creating a 3D thumbnail
1. Navigate the 3D view to theperspective that you’d like toshow in a thumbnailsnapshot.
2. Click the Create Thumbnailbutton.
3. Click the Metadata tab.
The 3D thumbnail appears.
Tip
Viewing thumbnails in theContents tab���&����������������� ����������&��������$������������� � ����0� �� ��������� �&������������� �������
�
The 3D thumbnail appears in the metadata.
�
ch04.p65 05/13/2002, 11:47 AM108
MANAGING 3D DATA 109
Displaying 2Ddata in 3D3*��������� ���������)*�� ���������� ����������� ���)*������� ������������� ���������� &/������ �� ���� ���� ��� ��� ��� �#� �������#� ��� ��� %��������������������� ���� ���� ��� ��� ��������� ������� ��&/������� �� �����
)*�+������ ����� ��� � �� ���:����<�������������� �%;��� � �� ������ ���� ������ ������������������������)*���� � �� ��� ������"��>����#� �%������#� ���2��������6���� �����#�� �������� �� ������ ����� �������������������)*#����,���� �� ����� � � �� ����� ���� ����� ������ ��"��>����� � �� $������ ����������� �� %���� ���������� ����� ���� �� �������? ���%����#�� �������������� ����� ��� ����� ������ � ����� ����� ��������� ���� �� ���� ����� ��%�����������%�������� ��� �������� �� ����� ����� ������� ����� ��������� ���������#� ���� ���� �� ���������� �������� �����2������� � �� ����� � � ������� ���� ��/��� ���� �������� ����������������� ����������������
Creating a layer
1. Right-click the data sourcefrom which you want tocreate the layer.
2. Click Create Layer.
3. Navigate to the folder inwhich you want to save thelayer.
4. Type a name for the layer file.
5. Click Save.
The layer file is now an itemin the Catalog.
Setting layer properties
1. Right-click the layer.
2. Click Properties.
You can use the LayerProperties dialog box to setmany properties of the layerin addition to the 3D BaseHeight, Extrusion, andRendering properties.
�
�
�
�
�
�
ch04.p65 05/13/2002, 11:47 AM109
110 USING ARCGIS 3D ANALYST
Setting base heightsusing an attribute
1. Click the Base Heights tab.
2. Click the option to Use aconstant value or expressionto set heights for layer.
3. Click the Calculate button.
4. Double-click the field that willprovide the z-value for thefeatures.
You can create anexpression, such as [contour]* 3.28, to set the z-values aswell.
5. Click OK.
6. Click OK on the LayerProperties dialog box.
The 2D features are nowdrawn in 3D using theattribute that you selected asthe z-value.
�
��
��
�
ch04.p65 06/11/2002, 12:30 PM110
MANAGING 3D DATA 111
Setting base heightsusing a surface
1. Click the Base Heights tab.
2. Click the Browse button.
3. Navigate to a surface.
4. Click the surface.
5. Click Add.
6. Click OK on the LayerProperties dialog box.
The 2D features are nowdrawn in 3D using thesurface that you selected toprovide the z-value.
�
�
�
�
�
ch04.p65 06/11/2002, 12:40 PM111
112 USING ARCGIS 3D ANALYST
Extruding features
1. Click the Extrusion tab.
2. Optionally, type a constantheight to which all featureswill be extruded.
3. Optionally, click the CalculateExtrusion Expression button.
4. Optionally, click the field thatyou want to use in theextrusion expression. You canbuild complex extrusionexpressions using functionsand algebraic expressions.
5. Optionally, click Load andbrowse to a previously savedextrusion expression.
6. Click OK.
7. Click the dropdown list tochoose how you want theextrusion expression applied.
8. Click OK.
The 2D features are nowextruded using the constantor expression.
Tip
What is extrusion?7����� ����� �����������������&����������� ����������������������������&�������&��1� ����������������� �$�� ������������$�� �����&�� �����������%�
�
� �
�
�
�
�
�
ch04.p65 05/13/2002, 11:47 AM112
MANAGING 3D DATA 113
StartingArcScene fromArcCatalog������������+��$��� ���+��-������ �� ��� �/���������� ����������� ��� �� ���������� :������+��$��� ���� ����)*�=������������ ���
Opening an existingscene from ArcCatalog
1. Navigate to the scene thatyou want to open.
You can use the Preview taband 3D View tools to previewthe scene before you open it.
2. Double-click the scene in theCatalog tree.
Opening a new scenefrom ArcCatalog
1. Click the ArcScene button onthe 3D View Tools toolbar.
�
�
ch04.p65 05/13/2002, 11:47 AM113
114 USING ARCGIS 3D ANALYST
Creating a new3D feature class�������� �������� ������ ������� ������������� ������ ����� ��������� ������ �������� ����������������� ��� ������� ����� ������� �� ���� ����� ����� ������ ��� ����� ��� ������� ��� ��������������������������������� ������ �� ���� ����������������� ��������������� ������� ����� ���������� ��� ������ ������������ ��
Creating an empty 3Dfeature class or shapefile
1. Right-click in the locationwhere you want to create thenew shapefile. Point to Newand click Shapefile.
If you want to create ageodatabase feature class,navigate to an existinggeodatabase and clickFeature class.
2. Type a name for the newshapefile.
3. Click the Feature Typedropdown arrow and click thetype (geometry) of featurethat you want to create—forexample, point, polyline,polygon.
4. Optionally, click Edit to definethe spatial reference for thefeatures.
5. Click the check box toindicate that the featurecoordinates will containz-values.
6. Click OK.
The shapefile is created. Youcan right-click it in theCatalog tree, click Properties,and add attributes if you wantto store attributes for the 3Dfeatures. You do not need toinclude a height attribute, asthe z-values will be stored inthe feature geometry.
�
��
�
�
�
ch04.p65 06/11/2002, 1:00 PM114
IN THIS CHAPTER
115
Displaying surfaces 5• Displaying raster surfaces in 3D
• Displaying raster surfaces
• Symbolizing areas with unknownvalues
• Displaying TIN surfaces
• Making a layer transparent
• Shading a layer
����������� ��)�#�%����������$�������������*�$����������'��� ��������#�������*����"�3��������*�������**��������'��$����������������/�4�������������**�������#������*������'��� ��%�����"
+�������������*����������������������������������������������������#���������������������#��������%���������������$����������������#���������������,���������"�5��������'����������������������������������%������������������#����%��#���������������#�����������������������T%����T'�������3����#�����������������%���'�����������������%�"�+��������������������$���������������'��&%�����������������**������$���"
����������� ��)�#������������$����������������*�/�4����*�������������#����������#���*������/�4�*����"�+���������������$�����������������%���*�����/�4��������������**������$���"
+���������&���������*����������#����������������#����������������������*����'��������%����'������������#������������������������%���������"
ch05.p65 05/13/2002, 1:41 PM115
116 USING ARCGIS 3D ANALYST
Displaying rastersurfaces in 3D���+��$��#�������������)*������������ ��������� ��� ��������� �������� ���������������0���� ����������������������5�����������&��������� ���#���������/�����������������������#�������� ������������&������� ������� �����������������������������������������������������
� ������������������������������ ��#�������������������������� ��� ������ ��;�� ������ ����������������������������������������������������������������������-����2����2����������������������� ��� ������ ���
Draping a raster on asurface
1. In the table of contents, right-click the raster layer that youwant to drape over a surfaceand click Properties.
2. Click the Base Heights tab.
3. Click the button to Obtainheights for layer from surface.
If you want to use a surfaceother than the current rasterlayer, either select one of thesurfaces in the scene byclicking the dropdown arrowor click the Browse buttonand navigate to anothersurface.
4. Click OK.
�
�
��
ch05.p65 05/13/2002, 1:41 PM116
DISPLAYING SURFACES 117
Displaying rastersurfaces���������������������� ���������������������������� ��� �������#� �������������������������������#��� �������������������5��������������������������
>������������������������������������ ����������������������������������������$����������������� ��������������#� �� ������#�+��6�������+��$��������������������������������������������������!��������������������������������������#��������������������������#��������������������������������������(������ ���������#����������������� �������������������������24"���������������������������� ��������������� ����������������� ������������������������
Drawing rasters thatrepresent continuoussurface data withseparate classes
1. In the table of contents, right-click the raster layer that youwant to show by groupingvalues into classes and clickProperties.
2. Click the Symbology tab.
3. Click Classified.
4. Click the Classes dropdownarrow and click the number ofclasses you want.
5. Optionally, click Classify andchoose the classificationmethod you want to use.
6. Click the Color Rampdropdown arrow and click acolor ramp.
7. Click OK.
Tip
Why don’t I see the optionto use unique values?:����� �� �&����������� � ���������������� )���������0� � ����������� ����������$���� �� ����������$���<��������� �������<���� ���� �@?��������������
�
�� � �
�
The continuous surface is drawn with different colors for each class.
ch05.p65 05/13/2002, 1:41 PM117
118 USING ARCGIS 3D ANALYST
Drawing rasters thatrepresent continuoussurface data with acontinuous color ramp
1. In the table of contents, right-click the raster layer that youwant to show with a continu-ous color ramp.
2. Click the Symbology tab.
3. Click Stretched.
4. Optionally, click the ColorRamp dropdown arrow andclick a color ramp.
5. Click OK.
Tip
Continuous rasters=�������������������� ���������� �� ��� � ��������$������������������������������� ��������� $������������$����� �� ����� ���������������������� ��������������&��� � �������������������� � ������&�����������������������6������������� �������������� ����������� ��������������� A>!!� �� �&�������:����� ��� ���������&���������������������������&���� � �������&����������������
The continuous surface is drawn with a continuous color ramp.
��
��
ch05.p65 05/13/2002, 1:41 PM118
DISPLAYING SURFACES 119
Drawing thematic rastersthat represent uniquecategories, such as landcover
1. In the table of contents, right-click the raster layer that youwant to show using uniquecategories and clickProperties.
2. Click the Symbology tab.
3. Click Unique Values.
4. Click the Value Fielddropdown arrow and click thefield you want to map.
5. Click the Color Schemedropdown arrow and click acolor scheme.
If your raster has a colormap,click Default Colors to revertto colors specified in thecolormap.
6. Optionally, click a label andtype in a more descriptivename.
7. Click OK.
Tip
Categorical rasters0���& ���������&�� �������&$��� ���� ���������������������$�� ���� ������� � ��&������������� ��������������������� �� ������������������� ���������$������������&��������&���� � ����� ������&$� �������� ��������� � ����� �$��� �����&$������&����& ������������������0������������������������&����� �����/ )���-�����
The categorical raster is drawn with unique colors for each value.
�
�� �
�
�
ch05.p65 05/13/2002, 1:41 PM119
120 USING ARCGIS 3D ANALYST
Stretching a raster toimprove the visualcontrast
1. In the table of contents, right-click the raster layer that youwant to increase the visualcontrast of and clickProperties.
2. Click the Symbology tab.
3. Click Stretched.
4. Click the Color Rampdropdown arrow and click acolor ramp.
5. Click the Stretch Typedropdown arrow and click thestretch you want to apply.
6. Optionally, click Histogram tomodify the stretch settings.
7. Optionally, if the rastercontains a background orborder around the data thatyou want to hide, checkDisplay Background Valueand set the color to No Color.
The cells will displaytransparently.
8. Click OK.
Tip
What is a stretch?#�������� ���������������� �����������������:�����������&������������� �&�����������������������%�������������� ������������ ��������������������������� �������� ��������������&��:����� �������� ����� ����������� �����������������������
The image raster is drawn with a contrast stretch.
�
��
�
�
��
ch05.p65 05/13/2002, 1:41 PM120
DISPLAYING SURFACES 121
Changing the band colorassignments for amultiband raster
1. In the table of contents, right-click the raster layer and clickProperties.
2. Click the Symbology tab.
3. Click RGB Composite.
4. Optionally, uncheck bands toturn them off.
5. Click the Red, Green, andBlue dropdown arrows andselect the bands of the rasterthat will be displayed in red,green, and blue.
6. Click OK.
Tip
Why do I only see threebands when I added a five-band raster?��� �&��������������� ��������������������� �$�&������� ��@?������������������������������������� ���:����� ����������������������������������� ������������ �� ���������$�@��� $�� �?��������������� ���?&��������$���������������� ������������������$�@��� $�� ��?���$�����&����� ��� ��������� ������ ���������� ��������������������������&�������
�
�� ��
ch05.p65 05/13/2002, 1:41 PM121
122 USING ARCGIS 3D ANALYST
Adding a single band of amultiband raster
1. Navigate to the raster.
2 Expand the raster to view theindividual bands.
3. Select a single band and clickAdd.
The band is added as asingle-band raster.
Turning bands on and offin a multiband raster
1. Click the color square besidethe band you want to turn off.
2. Click Visible to uncheck it.
The band is turned off.
Tip
Changing band colors:����� �)��%�&���� �������������� �� ����������� �� �������� ���������� ��������������� �� �$����%�����������)����<���$�@��� $����?���<� �����%������ �� ����������� ������������&����� ���������&�� ������������
ch05.p65 05/13/2002, 1:41 PM122
DISPLAYING SURFACES 123
Setting the default colorband assignments formultiband rasters
1. Click Tools and click Options.
2. Click the Raster tab.
3. Click the up and down arrowsto select the bands in theraster that will be rendered inRed, Green, and Blue.
4. Click OK.
�
�
�
�
ch05.p65 05/13/2002, 1:41 PM123
124 USING ARCGIS 3D ANALYST
Symbolizingareas withunknown values$��������������������������������������������� ����� ������������������������������������0�*���������������/������������������� �������������������� ���������������������� �������������� ������������������������������������� �� �����������������"���������������
����������������������������� �0�*�������"�������������������������� ����������������0�*����������������
Setting the NoData orBackground display color
1. In the table of contents, right-click the raster layer and clickProperties.
2. Click the Symbology tab.
3. Check the box to DisplayBackground Value.
4. Optionally, type a value todefine the raster’s Back-ground color.
5. Click the Background colorselector dropdown arrow andclick a color—or no color.
6. Click the Display NoData ascolor selector dropdownarrow and click a color—or nocolor.
7. Click OK.
�
�
� �� �
ch05.p65 05/13/2002, 1:41 PM124
DISPLAYING SURFACES 125
Displaying TINsurfaces��0������������� ���������� �������������������������������������������������������������� �������?�������� ���������� ���������������������������� �������������� ����� ��?����������������#�����#����������
����������������������� ���0 �������������������? ��%����#�!������������?������� �����0� ��������������������� ���&��������� ��������� ��������
Drawing TIN faces byelevation
1. In the table of contents, right-click the TIN.
2. Click the Symbology tab.
3. Click Elevation.
4. Optionally, click the ColorRamp dropdown arrow andclick a new color ramp.
5. Optionally, click the Classesdropdown arrow and choosethe number of classes.
6. Click OK.
The TIN is drawn with different colors for each elevation class.
�
�� � �
ch05.p65 05/13/2002, 1:41 PM125
126 USING ARCGIS 3D ANALYST
Drawing TIN faces byaspect
1. In the table of contents, right-click the TIN.
2. Click the Symbology tab.
3. Uncheck Elevation—or anyother TIN face renderer thatis checked.
4. Click Add.
5. Click Face aspect withgraduated color ramp.
6. Click Add.
7. Click Dismiss. �
��
�
�
� �
ch05.p65 05/13/2002, 1:41 PM126
DISPLAYING SURFACES 127
8. Click OK.
The TIN faces are renderedwith colors to indicate thedirection that they face.
�
The TIN is drawn with different colors for each triangle’s aspect class.
ch05.p65 05/13/2002, 1:41 PM127
128 USING ARCGIS 3D ANALYST
Drawing TIN faces byslope
1. In the table of contents, right-click the TIN.
2. Click the Symbology tab.
3. Uncheck Aspect—or anyother TIN face renderer thatis checked.
4. Click Add.
5. Click Face slope withgraduated color ramp.
6. Click Add.
7. Click Dismiss. �
Tip
Changing the slope of aTIN surface��3���� ����������������������������$� ��������� �������3����&������ �������*�� ���� ���� ������$��������������������3�������������������������
��
�
�
� �
ch05.p65 05/13/2002, 1:41 PM128
DISPLAYING SURFACES 129
8. Click the Color Rampdropdown arrow and select acolor ramp.
9. Click OK.
The TIN faces are renderedwith colors to indicate theslope of the terrain.
The TIN is drawn with graduated colors for each triangle’s slope class.
�
ch05.p65 05/13/2002, 1:41 PM129
130 USING ARCGIS 3D ANALYST
Tip
What are tag values?��3� ����� ����� ������ �������������� ��������������������&���������������� ��� ������� ����������������� ������������� �������������%�������<����������$���� �����������������&������� ������������������������������� ������&������������������ �����������
����������� �������������������� ����� �����������������:����� �&����*��������������������� )���������
Drawing TIN faces by tagvalue
1. In the table of contents, right-click the TIN.
2. Click the Symbology tab.
3. Uncheck Elevation—or anyother TIN face renderer thatis checked.
4. Click Add.
5. Click Face tag value groupedwith unique symbols.
6. Click Add.
7. Click Dismiss. �
��
�
�
� �
ch05.p65 05/13/2002, 1:41 PM130
DISPLAYING SURFACES 131
8. Click Add All Values.
9. Click OK.
The TIN is drawn with different colors for each triangle’s tag value.
�
ch05.p65 05/13/2002, 1:41 PM131
132 USING ARCGIS 3D ANALYST
Drawing TIN nodes byelevation
1. In the table of contents, right-click the TIN.
2. Click the Symbology tab.
3. Uncheck Elevation—or anyother TIN face renderer thatis checked.
4. Click Add.
5. Click Node elevation withgraduated color ramp.
6. Click Add.
7. Click Dismiss. �
Tip
How else can I display TINnodes?:����� ���������&���3� �����&����������������� ����� ���������&�����
�
��
�
� �
ch05.p65 05/13/2002, 1:41 PM132
DISPLAYING SURFACES 133
8. Click the Color Rampdropdown arrow and select acolor ramp.
9. Click OK.
The TIN nodes are renderedwith colors to indicate theirelevation.
In this example, you can alsosee the Soft and Hard edges,which are on by default, if theTIN has them.
�
ch05.p65 05/13/2002, 1:41 PM133
134 USING ARCGIS 3D ANALYST
Drawing TIN edgesgrouped with a uniquesymbol
1. In the table of contents, right-click the TIN.
2. Click the Symbology tab.
3. Uncheck Elevation.
4. Click Edge types.
By default, only the type 1and 2 (Hard and Soft) edgesare displayed.
5. Click Add All Values.
6. Click OK.
Tip
How else can I display TINedges?:����� ���������&�������3�����������������&����$�� ��&����� ����� ��������� ������������&����������������&�� �����#���-������ ���������-��������� �
�� �
��
ch05.p65 05/13/2002, 1:41 PM134
DISPLAYING SURFACES 135
Making a layertransparent����������������#���0#���� ����������������������������������������������������������������������&����������������� ������ ������� ��������#������������� ���#��������������������� ��� ��� ���������������
1. In the table of contents, right-click the layer and clickProperties.
2. Click the Display tab.
3. Type a value in theTransparent box.
4. Click OK.
�
� �
Tip
How else can I make alayer transparent?:����� ��������#�'������ ����� �&������� �����7�������������� #��=����������"��7������������� �#��6�� ��������������� ���� �&��������&���
ch05.p65 05/13/2002, 1:41 PM135
136 USING ARCGIS 3D ANALYST
Shading a layer�����������������#���0#���� ���������������������������� �������������������������������������������������������������������� �������������������������������� ������������
1. In the table of contents, right-click the layer and clickProperties.
2. Click the Rendering tab.
3. Check the box to Shade arealfeatures relative to thescene’s light position.
The option to Use smoothshading if possible is checkedby default. This minimizes theshading of small surfacevariations to create asmoother-looking shadedsurface.
4. Click OK.
Tip
Changing the light source:����� ���� ������������������������� ������������� �� ��������� ��� �����������0��%��������� ��� ������ �����6�� �1����������������4����1������������������������ �������������&������ ��������������������� �
Tip
TIN face shading:������ ���� ��� ����������� ���������3�������� �������&���% ������6&������&����$���% ��������3�������� �����$�� �����% ������ ����% ������6��������������� ��� �����%�����
�
� �
ch05.p65 05/13/2002, 1:41 PM136
IN THIS CHAPTER
137
Analyzing surfaces 6• Querying surface values
• Understanding the shape of asurface
• Deriving slope and aspectinformation from a surface
• Creating contours
• Analyzing visibility
• Deriving hillshade from a surface
• Determining height along a profile
• Finding the steepest path
• Calculating area and volume
• Reclassifying your data
• Converting surfaces to vectordata
• Creating 3D features
����� .*������������������������*���������'����*�#�����.��#��������'������%�����������*���*��������"�+�������$����������#������$�������*�����$����������%�����$������������������������*�������%������������������'�����������������#���*�����*����������'����#������*��������*���"�5���!��#����������%���$�������&��$������������������#��������������#�����#���������������������������*���#��������������%�����#���������������*���"�+����%���$�������&��$�$�����������'����������#����� ���������#�����3������$����#���#��#�����������$�����'�"�+�����%���'����������������������#�������*��#��#������������������������������*������������������%�"�>���������%���'���������������%���������*����������'�����������*���9�����#��������������������������##������'�����#������$��%��������*���"�5����!��#�����������$�������&��$�$����#���������������������������������$����#������*�������*����*����������������������������$������������������������*��������������������������*������������������#����#�������"
���������������������%��������$����*��������#���#��������������'��� �����������**������$�������� �������%������������������%����������*����������'����#���*���#��������������*������������������������%���������*��������������������#�����#�������������������*��������$��������*���"���� ������������%����������������������������*��������������������������*������������$����������������������������"
ch06.p65 05/14/2002, 10:41 AM137
138 USING ARCGIS 3D ANALYST
Querying surfacevalues$������!�������������)*���������������������� ������5�������������������������������� ����)*@+�������������%���������������������������������������� ���������������
����������������� ������� ������ ������������������'������������������ �������� �������0#��������� ��������������#�����#����������� ������������������������ ����0� �����������������#������� ���������������'���������������������� ��#�����������������������������'��������������� ���#����������� ������ ���� �� ����
Identifying features orcells by clicking them
1. Click the Identify button onthe Tools toolbar in ArcSceneor ArcMap or on the 3D ViewTools toolbar in ArcCatalog.
2. Click the mouse pointer overthe feature or cell you want toidentify.
Displaying Map Tips forsurfaces
1. In the ArcMap table ofcontents, right-click the layerfor which you want to displayMap Tips and clickProperties. �
�
�
�
ch06.p65 05/14/2002, 10:41 AM138
ANALYZING SURFACES 139
2. Click the Display tab.
3. Check Show Map Tips.
4. Click OK.
5. Move the mouse pointer overa TIN facet or raster cell tosee the Map Tip.
Tip
Displaying Map Tips forfeatures:����� �����&�=������������������������&��������=��������������� �� ��������������8�����&�����&������
:����� ���� ������������&����&�������&����% ������4������� �������&���1����������������$����% ������1����&�����&������������ ������$���� ���% ���������
�
�
�
�
ch06.p65 05/14/2002, 10:41 AM139
140 USING ARCGIS 3D ANALYST
Understanding the shape of a surface
;����������������������������������� ���#�����������#����#���� ����" ��� �� ����>�@�����&!� �����������������������#���������� ��#�!�� ##������������>����������������������#���������� �����!��3� ������1����#���������������� ����������������������#���>
������ ������� ���� ���������#����>�������� ��#��������������! ������!�������������� ������� "�F#�� �������3��!�������"������ ��� ������3��������� ���!���3�����!������������ �����1 �� ���� ������� "�>
Slope and aspect in rasters and TINs
9������������*+��!��������#���<������������������ ��� ##���������>�*����������3�������������������������������#������������1�# �� �����������������&:"�����#��������������� ���� �������� ����� ��1��>�����������������������#����������1��!���������������������"����#���������� ��������������>�*����*+3�������� ������#������# ������������� ����������������������>�������"���������' �,������������3����������3�������'�����������������#����>
Hillshading surfaces
���������������������������#�� �����������,����������#���������������� ��! ������#�!������� ����������>�E ��������������#��#�� ������ �������������� ��#������� ���������#�������#�������� ��#������!���#��������� �� ���"� ��1����������� �>
3D perspective hillshaded view of terrain and planimetric contour linerepresentation of the same area
Terrain slope and aspect surfaces. In the picture on the left, darker shadesof red indicate steeper slopes. In the picture on the right, west-facingslopes are dark blue, and southeast-facing slopes are yellow.
������������ "��������������������������� �� " �����������������#�����������#���>��������� ������!�����������������������������#���� ��������������������� ������������������������ ���� #��� ���� �������������!��#�!�����������#���������>������� ��������� "������#����#������������#����#���3�1��������������"������#����� ����#����������� �>
���������������������������������#��!���'��� ��� "������� ��#�����������#�����#���>�-��������������������������#�'��� #� �������������#�����#������������� ��������� �>
!����� ������ ��� ��3������������3�#�����#���>�*�� ��#�������� ������������# ���������� ������������#��������� ���������� ���� ��������3��� ���!���1������������ ���������� ���>
ch06.p65 05/14/2002, 10:41 AM140
ANALYZING SURFACES 141
��������������������� ������������#���>�;�������� '�3��� �� ��!�����#��#����� ���������#�����" ��� &�� �3� ������������� ���#������������ �����-������ �������9����� �����1� �����=�����2����� ���� ����1�>��� ������������������F������#��������������#�����������F������#��3�� ������������<�*��! ��� ������ ���>�E ������ ��� ����1����#����#���*+�>�@!������� ����#����������1���������������������������#����>
Deriving contour lines from rasters and TINs
������������� ����������������������� ������� ���� ��������!���� ���F������F"���� ������ ������ �����*+>���������������������������������� �������������>�;������� ������ �,������#����� ��������������>��� ������������� ���������� ��3��� ����� ����������������� �� ������������!��>���������������������������� ������������������#���������� ��!!���>��� ��������������� ���#�������� ������ "������� ����"���#�������������#���>�������������������"�������#������������� ������� �������� 1��>
��������������������#�!����� �3��������� ���#��� � ������������ ����1�����������������������>������ ��������!�������������������������������������#�������������1���� ��>�*��������3���������������������#�!����*+3�����#��� � ��������������� ����� ����������������� �������������������������"���3�� ���� ����� �������� ��1������������������� �����������! �����������������������������#���>3D perspective view of terrain without and with hillshading
2D elevation raster, transparent hillshade raster, and shaded relief map
Contours created from a raster surface and from a TIN surface
��������������� '�3��� ��� ����#����� ����#��������������#�������� ��������� �������#����� �����5��3� ����������E ����������#���������� ���!!���� �������������������1��>�� ����������������� ��������������������������!�,������ ��������������������� ������ ����3�����3�� ���������"�� �������>
ch06.p65 05/14/2002, 10:41 AM141
142 USING ARCGIS 3D ANALYST
Calculating slope
What is slope?
-���� ���� # �������������������� ��������#�������� �������#���>�-���� ������������#��������� ������ ���*+������#����������� ���������>�8�����*+��� �� ������!�� !!������#�������� ����"�� ��������������� �����>�8���������� �� ������!�� !!�����#�������� �����"�� ��"����������������� ���� ������ ��1��>
����������!!������,������ ������#������������������������������������������ � ������������������������>������������������"���3�����#���������������� �C������ ��������������"���3��������������������� �>�������������������������1������������������������������������#�����>
Elevation grid
���������������������'����(���������3������ ��� ���'����������>��������������������������3����������#��� �������� ��$$��������>�+������������������������������"��� ����A.$NB3������������������������������ �# � ��>
���������#��� �� ��!���#��'�����������������"�� ���� �3�������#��� ���� ����!�����>�-������������������������������������������!��>
0–7
8–15
16–23
24–31
32–39
40–47
48–55
56–63
64–70
71–78
?���
:�$
Slope map (in degrees)
Degree of slope = θ
rise
run= tan θ
Percent of slope = * 100rise
run
Degree of slope = 30 45 76
Percent of slope = 58 100 375
ch06.p65 05/14/2002, 10:41 AM142
ANALYZING SURFACES 143
Deriving slopefrom a rastersurface$���������������� ��������������� ����������������������������� ����� �������������
������������������������������������� ���� ������������� ��������
$���������������������������� ��� �������������� ���������0#������������������������������ ������ ������0��� ����
Deriving slope
1. Click 3D Analyst, point toSurface Analysis, and clickSlope.
2. Select the surface from whichyou want to derive a raster ofslope values.
3. Click Degree or Percent.
4. Type a Z factor. This iscalculated automatically if theinput has a defined spatialreference that includes z unitinformation.
5. Type an Output cell size.
6. Type the name of the Outputraster.
7. Click OK.Tip
Degree and percent slope6������� ������������ ���������������*� ����+ AB ,��������� �����$���������������������&������ $�����( ��#������� ���������������������+B �������,$��������� ���������������� � �&�
Tip
Why use a Z factor?��������������������������$�����*� ������������������������$&� ���������&����� ����������$�����;������������� �����*�� ������$&� ���4����������$���&�����$&� �����������$�� ��&����*�� ���������$�&��������������;���������� �" CD������ �������������������
�
��
�
�
�
�
ch06.p65 05/14/2002, 10:41 AM143
144 USING ARCGIS 3D ANALYST
Why use the aspect function?
����������!����� ##�����������������������������#��� �>�8� �������3���!���������
O 8 �����������:#�� �������������!��� ����������#���������#������1����������#���, ����>
O ������������������ ��! ��� ��#����������� �� ������� ���������#���������������! �������� "��� ���#�� #����������� ��>
O 8 ��������������������� ����!��� ������ ���� ���� #����� ����������������� ��� ,������!����# ���3���������#��������� ���� #���������� ���� ������� ������������� ,�����1��� ��1��!���������# ���>
O *���� #��������#�#�����������# �����������#����������������� ������#��!�������>
What is the aspect?
������� ������� ���� ��������������#����>�*�� ���� # ������������������������ ���� ����������� ��������#���>�*������1�������#���������� ���� ���������!������ ���� ����� ���#����>������� ������������#��������� ������ ���*+������#������������ ���������>
������� ��!���������������,� ��� ����������#�!�$F������F���4$F��� ���������3��! ���#���� ����>�����"����#���������� �������������� �� �� ����������� ���� �� ���� ����������<�������#����>�8������������"����� ���� ����������� "����"����#�:�>
Calculating aspect
0
90
135
180
270
315
N
S
EW
NW NE
SESW225
45
Flat
N
NE
E
SE
S
SW
W
NW
?���
:�$
Flat
N
NE
E
SE
S
SW
W
NW
����� ����!�1������������ �������"�� ���� ���������������������� �>
ch06.p65 05/14/2002, 10:41 AM144
ANALYZING SURFACES 145
Deriving aspect
1. Click 3D Analyst, point toSurface Analysis, and clickAspect.
2. Click the dropdown arrow andclick the surface from whichyou want to derive a raster ofaspect values.
3. Type an Output cell size.
4. Type the name of the Outputraster.
5. Click OK.
Deriving aspectfrom a rastersurface$���������������� ��������������� ����������������������������� ����� �������������
����������� �������#������������������������������������� ���� ����
+���������������������������� ��� �������������� ���������0#������������������������������ ������ ������0��� ����
�
�
�
�
�
ch06.p65 05/14/2002, 10:41 AM145
146 USING ARCGIS 3D ANALYST
Mapping contours
What are contours?
����������� ����������������� ����#��'���"���3����������"�� �3���!�������3����� � ��� �3����� �3�����!����� ��������>������ ��� 1� ��#������ ������������"���������������������#���>������������� ��� ������������ ����"���3������ ��������������#������������>�����������"����� ������#�������� ���3����� ���������������������>
Why map contours?
)��#��� �������� ���#������� ���������3������� ���� #��� ������� �����"��������!��"���>�)���, �������������� ���#��G�����������3��������� ������������ !����� ��#���������� ��#�"����>
�������!����1������������ �������"�� ���� ������������������!��>�������������������������������������������� �� ��������������������� ��>���������������� �������������#� ��������"�� ��A ���� ��������� �������"�� ���� �B>
Elevation grid and derived contour map
Using contours in a scene
������������#�! � �����#��������������� ��#��!���������3�����������"��!�������� ���������>�@������ ����������#������� �������������1������ �������1������ ����#����������#�!���� ��"���� ������#��������1��>������� �������������������������� ��" ��� &�� �>
Contours superimposed on terrain surface model
Feature attribute table for contours
�������� 1�����1���#����������#����������� ���������"�� ����� 1���#������������� ��>
ch06.p65 05/14/2002, 10:41 AM146
ANALYZING SURFACES 147
@���������������� �� " ������������ �������� ���� #����<�������������#�������������#���>�������������������������������1������������������������� �������� ���1���� �, �������#���� ������������!��>
3D graphic contour copied from a scene into a map
3D graphic contours marking lines of equal elevation
@���������������������� ���1����������-�����������5���������1� �����" �����������������1���������������� ������������� �� ������������������������������ �����!��>
Contour toolArcScene 3D Analyst toolbar
ArcMap 3D Analyst toolbar
@�������� �� " ��������� ����������' �,���# ���� ����#�'���"���� ���������>�8�����!���3�������������!���!��,���������� ��������������� ��#������! ������# ���� ���� ��������" �>
ch06.p65 05/14/2002, 10:41 AM147
148 USING ARCGIS 3D ANALYST
Deriving contourlines from asurface-���������������� ������������ ������������� ������������+�����������������������������������������������5����������������������'��������������� �����������/���� ������#���������������� �������� �����������
������������������������ ������������ ��#����������������������������������������������������������������
Deriving contours
1. Click 3D Analyst, point toSurface Analysis, and clickContour.
2. Click the dropdown arrow andclick the surface from whichyou want to derive contours.
3. Type the Contour interval.
4. Optionally, specify a Basecontour.
5. Optionally, specify a Z factor.
6. Browse to the location whereyou want to save the contoursand type a name for them.
7. Click OK.
Tip
What is the offset?���������������&����� ������������ ��������� ������ �����?&��������$������� ����������������� ����� ��������������������������������� ��������� ������ ��������������������� ������ ��������>BD������$&������������� ����������>�������������� ������ ��������" �
Tip
What is the Z factor?����;������������������'������� ���������������4����������$��&������������� ������$�� ��&���� ��������������� ����� �����$&��������������;�����������"�>D�
�
�
���
�
�
ch06.p65 05/14/2002, 10:41 AM148
ANALYZING SURFACES 149
Creating a single contour
1. Click the Contour button.
2. Click the surface at the pointwhere you want the contour.
The contour is added as a 3Dpolyline graphic. The heightof the contour is written to thestatus bar.
�
�
ch06.p65 05/14/2002, 10:41 AM149
150 USING ARCGIS 3D ANALYST
Analyzing visibility
����������#�������� ����#�������!�� �������##����������������#������#�����!��������� ��������� "���� ����������>������ �" � 1���#�!������� �� ����� !����������!���� �������! � ������"����#������������3��������� ��#������!!� ��� �������3�����������!����#�! � �����#����>��������������������������! ���" � 1 � ���������#����#�!�� ������ ����������� "��� ���#�� ������������������� �����#���� ������������>
What is a line of sight?
��������"������� ����� ���1����������� ������������������������#������#�������������� ������������" � 1�������� �����#�!���1���"��>������ ������ ���#�� ����������������! ������������� "���� ��� ��" � 1���#�!��������� ��>�*#���������� ��� ��������������� ��3���������������������1����� �� ���������������� �" � 1������ ��������������� ���#�� ���>�����" � 1������!������������� �������3���������� ��������!�������������� �����>
�� ��������������������� ���#�� ���� �����-����3���������������� �����5��������������������� �� ����������>������ ��#�� ���� ������� ����������������������������������� �������� ������#�����������#���>
What is the viewshed?
����" ������� ���� # ������������� ����� ��������������������1������#�!������!���1���"�� ��� ������� ���>����������� �������������������� "�����"��������� �� ���������!���1���"���� �������������������� �>�*#�����"��������1���"���� ��3��������������������1�������#�!�����1���"���� �� ��� "�����"����#��>����������������������1�������#�!����1���"���� �������� "�����"����#�$>
����;1���"���2 ����#�������������������� ��� ������� ���>�������������"��� ����#�� ����� ���1���������1���"�� ��� ���>
Why calculate the viewshed?
����" ������� ����#����������������,������" � 1��1G�����! ����1�F#�����!���3���!����������,���P8�!�� ������� �������������������� �����������# ���1��" � 1��� #� �� �������� ���� ������ ��Q3�P������ �������" ���1��� ,��#�!��� �����Q3���P������ ��1�������������#�����!!� ��� �������Q>
Line of sight created in ArcMap and copied and pasted into a 3D scene
Target
Observer
Observer height
Line of sight
����������������� ���#�� ���3���# ������������##����#����1���"��������������� �����1"��������#���F����1���"��������������1��������� ������1"��������#���F��������� �,����1���"��������������� ���3������������ ��� �����������1���������!>
ch06.p65 05/14/2002, 10:41 AM150
ANALYZING SURFACES 151
*���������!����1���3�����" �������#�!����1���"�� ��� ��� � ���� # ��>��������"�� ���� ��� ������������� ����#���������A���,������� ���������������������"�� ��B3���������1���"�� �� ��� ��!��,���������������� �����>������� ������������" � 1��#�!�����1���"�� ��� ��3��� ��������� �������������" � 1��>
� ����� ������ ������������������������"�� �������������#�!�����% �������#��� ��� "�����"�������� �� �� !����� ��#�������������������������� �� �������������� �����������1���"����������#�!�����1���"�� ��� ��>
ch06.p65 05/14/2002, 10:41 AM151
152 USING ARCGIS 3D ANALYST
Creating a line ofsight���������������� �� ������������������������������ ���� ���� ������������ ������������������������������������������������������������ ���������� ����������������� ������������ ��������������� ����������������� ���� ������� ����������� ����������������������
���������������������������� � �� ���������������� �������� ��������� ����������������� ���� �������������������� � ����� ������� ���� ����������� ���������������������� ��� ���� ������ � ����������� ������������� ������������� �� ��������������� �� ������������ ������ �� �� �������������
1. In ArcMap, click the Line ofsight button on the 3DAnalyst toolbar.
2. Optionally, type an Observeroffset.
3. Optionally, type a Targetoffset.
4. Optionally, check the box tomodel curvature and refrac-tion. For this option to beenabled, the surface musthave a defined spatialreference in projectedcoordinates and definedz-units.
5. Click the surface at theobserver location, then clickthe target location.
Tip
What are the Observeroffset and Target offset?������������������ �������������������������������� �������� �� �������� �� � ������������������������ ������������� ������� �������������� ������������������������������������ ���� �������������������������������� ������������ ������ �������������
����������������� �������� ���������������� ���������������������������� ������� ���������������� � ��������������������
�
�
�
�
�
ch06.p65 07/18/2002, 11:17 AM152
ANALYZING SURFACES 153
Deriving aviewshed���=����������������� ������������������ ���� �������������� ����������������������� ��������������������#��� ������������������������������ ��������
���=����������������������������������������������������������������� ������������ ������� ������� ������������������ ���������#��������� �������������������������� ��� ������ ������������������� ��
����������� ������� ������������0�
Creating a mapdisplaying the viewshed
1. Click 3D Analyst, point toSurface Analysis, and clickViewshed.
2. Click the Input surfacedropdown arrow and click theinput surface you want tocalculate the Viewshed from.
3. Click the Observer pointsdropdown arrow and click thefeature layer to use asobserver points.
4. Specify a Z factor. The defaultis 1. The Z factor is automati-cally calculated if the inputsurface has a spatial refer-ence with z-units defined.
5. Specify an Output cell size.
6. Specify a name for theOutput raster or leave thedefault to create a temporarydataset in your workingdirectory.
7. Click OK.
Tip
Using optional parameters9��� �������������������<619�$�94467�#$�94467�?$�� ���� <����������������&�������� �� ������������������������������������4�������� �������� $�������#��@�6���%�������������������
�
�
��
�
�
�
ch06.p65 05/14/2002, 10:41 AM153
154 USING ARCGIS 3D ANALYST
Using hillshading in analysis
)��!��� ��������3������� ���� #������������������� ���1�� �����������#���������������������� ������ !��#����>��������������� ������������#����������������������$C������������������������� ��� ��������#�!��������>�@������������ #��"����������������������3����� �����1 �����������>�*���������!���1���3�����1���,����������� �������>������& !��� ��������!�31���������������A��� ���B�����1����!� # ��>
What is the hillshade function?
����� ��������#��� ��1�� �������������� ���� ��! ��� ��#����#����1�������! � ��� ��! ��� ��"�����#������������ �������"�� ���� �>�*�������� ��1���"���� ������������ ��� ��1������������ � ��#������ ������������������ ���� ����������������#��������� �>�*��������������������������" ��� &�� ��#�����#���#�������� ��������� ����� �����>
)����#���3������������ ���������������#���������� ������ �� ��������#�!�$������3� ������ ���#�!�1���,����� ��>
Computing hillshade
0
90
180
270
�����& !��� �������������� ���� �#�������3�!�������#�!������ ����,� �����������#�!�$����4$>����& !���#�.$��������� ��������>�������#���� �������������A+�B>
������� ���� �������������������#���� ��! ��� ��������1"������� &�>������ ������� ���������3#�!�$F�������� &�F��.$�������F"������>�������#���� �(���������>
����� ���������#������ ���������������#����������& !���#���������������������� ����#(���������>
Sun angle: 45 degrees
Using hillshading for display
)������ ���������"�� ���� �������#������������ ���������� �����!�, ����������"�� ���� �������������3���1�� ����"������� �� �� !����#��������"�� ��#��������������>�@�������������������3��������������������!�3���#������ ����������� �#�!�� ����������� ������� �����>
Sun angle: 60 degrees
ch06.p65 05/14/2002, 10:41 AM154
ANALYZING SURFACES 155
Deriving hillshadefrom a surface>������������������������������������������� ����� ��#������������ ��������������>������������� �����������&���������������������� ���������������������������������� �������������������������!����������������������������������������������>���������������������������0�������
������������������������� ����� �����������������������&������������+����������������������� ���������/������������� ���������&��;�&���������������������������
Creating a hillshaderaster
1. Click 3D Analyst, point toSurface Analysis, and clickHillshade.
2. Click the dropdown arrow andclick the surface from whichyou want to derive a hillshaderaster.
3. Specify the azimuth you wishto use. The default is315 degrees.
4. Specify an altitude. Thedefault is 30 degrees.
5. Optionally, check Modelshadows if you wish toinclude the shading effect ofsurrounding cells. Cells in theshadow of other cells will becoded 0.
6. Specify a Z factor. Thedefault is 1. The Z factor isautomatically calculated if theinput surface has a spatialreference with z-unitsdefined.
7. Specify an Output cell size.
8. Specify a name for theOutput raster.
9. Click OK.
Tip
Modeling shadows0���%�=����������������������� ������&����� ������������������������
Tip
Specifying a Z factor/������;�������������%�����*�������� �����������������$&� ������&������� ��&�� ������ �����$�� ��&����*�� ������ �����$&�������������&���;����������"�>D������ �������������������
�
�
��
�
�
�
�
ch06.p65 05/14/2002, 10:41 AM155
156 USING ARCGIS 3D ANALYST
Shading a raster with ahillshade
1. Create a hillshade raster fromthe surface raster that youwant to shade (see ‘Creatinga hillshade raster’ in thischapter).
2. In the table of contents, right-click the hillshade layer andclick Properties.
3. Click the Display tab.
4. Type a value in the Transpar-ent box to set the percenttransparency. 50% is areasonable value.
5. Click OK.
You should now see theelevation raster through thehillshade raster.
Tip
Adding depth in 2D:����� ����������������������� �� ��������������� ���������� ��>�������������� ���� �������� ����3����������������� �������������������&$���&����� 8� ���������������������������������
�
�
��
ch06.p65 05/14/2002, 10:41 AM156
ANALYZING SURFACES 157
Shading 3Dsurfaces in ascene$������������������������� ��)*���������������������� ������������������������� ����� ����"��� ���#���0��� �������������������������#��������������������� ��2������� �������������� �����#���?���������� ��������������������������
Shading a raster surfacein a scene
1. In ArcScene, set the baseheight of the raster to itself(see ‘Displaying rastersurfaces in 3D’ in Chapter 5).
2. Right-click the raster layer inthe table of contents and clickProperties.
3. Click the Rendering tab.
4. Check the box to Shade arealfeatures relative to thescene’s light position.
The option to Use smoothshading if possible is checkedby default. This minimizes theshading of small surfacevariations, which creates asmoother-looking shadedsurface.
5. Click OK.
�
��
�
ch06.p65 05/14/2002, 10:41 AM157
158 USING ARCGIS 3D ANALYST
Determiningheight along aprofile<�� ��������������������������� ������ ���������������������������������������� ������� ������������������ ��� ������ ������������������������������������
1. In ArcMap, click the Layerdropdown arrow and click thesurface that you want toprofile.
2. Click the Interpolate Linebutton.
3. Click the surface and digitizea line. When you are finished,double-click to stop digitizing.
4. Click the Profile Graphbutton.
5. Optionally, to change thelayout of the profile graph,right-click on the title bar ofthe profile graph and clickProperties.
Tip
Profiling a 3D line feature:����� ������������������������������"��� ���������$�������������"����������6��������"��� ���������� �����%�1������@�����
�
�
� �
�
ch06.p65 05/14/2002, 10:41 AM158
ANALYZING SURFACES 159
Finding thesteepest path������������������ �������������0���� �������� ���������$���<����������$���<��������������������������� �������������� ��������������������������� ������� ��������������������������������������������������� ����� ����������������������?��������������������������� ����������������������)*�������������������������������
�������������$���<������������������������ ����0���� �������#� ���%����#�� �����������������������/� ������������� ��������������� ��� �������� ���������������� ����,������������������� ������� ������#���,���������������������������
1. Click the Steepest Path tool.
2. Click the surface at thelocation where you want thepath to begin.
�
�
ch06.p65 05/14/2002, 10:41 AM159
160 USING ARCGIS 3D ANALYST
Calculating areaand volume�����+�������=����$���������������������3*���#���� ������#�����������+��������������������� ���������
���3*������ ������������������ ���� ������������������������������������������� ������������������������������ ������ ��;���������������������������� ����� ������������������������� ������ ��#������ ������������������ �����������3*���������������������������� �����3*����������� ������������������������ ��������������������� ����� ��?������������ ��� ����������#��������������������� ���
������������������?���� �����������? ������� ���������� ���������������������������������������������������� ������������ �����#�����������������5���������������A������������������ ����1#3BB/ �������������������� ��������CD����A������������������ ��������������������� ������� ������������)BB���CD
1. Click 3D Analyst, point toSurface Analysis, and clickArea and Volume.
2. Click the dropdown arrow andclick the surface for which youwant to calculate area andvolume statistics.
3. Type a height for thereference plane.
4. Click to calculate above orbelow the reference plane.
5. Optionally, type a Z factor toconvert the z units to x,y unitsif the z units of the surfaceare not the same as thex,y units.
You will get inaccurate resultsif the units are not the sameand you do not include aZ factor.
6. Optionally, check the box tosave the results to a text file.
7. Optionally, type a name forthe text file where the resultswill be saved.
8. Click Calculate statistics.
The 2D area, Surface area,and Volume will be reportedin the area below this buttonand optionally written to a textfile.
You can change theparameters and click thebutton again to repeat thecalculation.
9. Click Done.
�
�
�
�
�
��
�
ch06.p65 05/14/2002, 10:41 AM160
ANALYZING SURFACES 161
What is reclassification?
9������ #� ������������ !����!����������� ��� ���������"����� ����������������"����>�9������ #� ������ �������� �������� ��� ����� !������������ �������������#������#�! ����#��������� ���"����������#�������� �>
���� �������������1�������������#�!��>�*#���������!�� 1���������3�����# ����1����� ���1����,����������� ������������� # ��� �>
Why reclassify your data?
����������!�����������������! ������������������ #��������>�-!��#�����!����!!��������������
O 9�������"�����1����������� �#�!�� �>
O ����� #������� ��"�������������#��� �����>
O ����� #������� ��"�������������#����"��� ����"����#�!���#�������� �>
O 9������ #��"����������!!�������>
O -������� # ��"�������+�������������+��������������"���>
Replacing values based on new information
9������ # ��� �� ����#����������������������������"����� ����� �������������������� �������"����>��� ������1������# �� ��������������"����#�������3������!1���#������3�������������1����� ##������"���>�8�����!���3��� ��!���������� #������������ ������������������"���� !�>
Grouping values together
@�!����������� !�� #������ �#�!�� �� �����������>�8� �������3���!����������������������"�� ��������#�#���� ������#������������������������"����� ���������������� ��3������������:#�� ����������:#�� ��������>
@�!����������������"���������������� ���������#�!����#���F#�����!���3�# �� ������������� ����������������"���������������������������>�@����������������"����������#���� �, ���#�������"���������������� ��� ���������� # �������������������������>
Reclassifying values of a set of rasters to a commonscale
���������������������� #�� ������� ���"�����#����#������3���� � " ��3��� � ��3����!��� ! ������ ��� ������������>��� ��!��1����������� ������������A���������#�� �������!���1����� ����"�����#��L�$�����������������������#������� 1 � �������� �B��� �����"�������������������������!!��������#�"����>
Setting specific values to NoData or setting NoDatacells to a value
-!�� !��������������!"������ # ��"�����#�!��������� �>�8�����!���3�������� ��������"��������!�����"������ �� ��F��������������������� �� ��F�����!���������<�1 ��������>�*��������������! ������������������������"������+����� �����������!"�����!�#�!�#������������ �>
*������������3���!�������������������"����#�+�������1���"���>�8�����!���3���! ������' ������� �#�!�� ��������������������"����#�+������ �����������"���>
Reclassifying data
ch06.p65 05/14/2002, 10:41 AM161
162 USING ARCGIS 3D ANALYST
Reclassifyingyour data���2������ ��������� �%�� ������������� ����������������������������������������������������������
�������������������������������������������#������������������������� ����������� �������#��������������#������� �������������������������? ���%����#� ������������ �������������?����������� �����������0�*����������0�*�����������������
���:���� ������ ��������������������� ����������������������� �����������$��� �������������������������������������
���$��� ������ �������������������� �� ����������
Tip
Changing the classes ofyour old values0��%�0���&��������&�&������������������� ��&�
0��%�/ )������������������������������� ���� )���������
Tip
Replacing NoData values3�������������� ������� ��� �� ������������ �����������&��&������������ &�������
Replacing values basedon new information
1. Click the 3D Analystdropdown arrow and clickReclassify.
2. Click the Input Rasterdropdown arrow and click theraster with a value you wishto change.
3. Click the Reclass Fielddropdown arrow and click thefield you wish to use.
4. Click the new value you wishto change and type a newvalue.
5. Type the Old values entry ineach New values input boxfor all other values to keepthem the same in the OutputRaster.
6. Optionally, click Save to savethe remap table.
7. Specify a name for the OutputRaster or leave the default tocreate a temporary dataset inyour working directory.
8. Click OK.
�
�
�
�
� � �
�
ch06.p65 05/14/2002, 10:41 AM162
ANALYZING SURFACES 163
Grouping entries
1. Click the 3D Analystdropdown arrow and clickReclassify.
2. Click the Input Rasterdropdown arrow and click theraster whose values you wishto group.
3. Click the Reclass Fielddropdown arrow and click thefield you wish to use.
4. Click the New values youwish to group—click one,then hold down the Shift keyand click the next one—thenright-click on Group Entries.
5. Optionally, click Save to savethe remap table.
6. Specify a name for theOutput Raster or leave thedefault to create a temporarydataset in your workingdirectory.
7. Click OK.
Tip
Ungrouping entries���� ������� ���$���������%����������� �����%�/ ������7 ��&�
Tip
Changing the classes ofyour old values0��%�0���&������� �������������� ����&��������������
0��%�/ )������������������������������� ���� )���������
�
�
�
�
� � �
ch06.p65 05/14/2002, 10:41 AM163
164 USING ARCGIS 3D ANALYST
Changing theclassification of inputranges
1. Click the 3D Analystdropdown arrow and clickReclassify.
2. Click the Input Rasterdropdown arrow and click theraster whose values you wishto reclassify.
3. Click the Reclass Fielddropdown arrow and click thefield you wish to use.
4. Click the Classify button.
5. Click the Method dropdownarrow and choose a classifi-cation method to use toreclassify your input data.
6. Click the Classes dropdownarrow and choose the numberof classes into which to splityour input data.
7. Click OK.
8. Modify the New values foryour output grid ifappropriate.
9. Specify a name for the OutputRaster or leave the default tocreate a temporary dataset inyour working directory.
10. Click OK in the Reclassifydialog box.
Tip
Changing input ranges tounique values���&���� ������������������ ���� ���� ��&����� ������������� )��������$����%�/ )���
See Also
6���E6�� ������������� �����8� ������� ����
�
�
�
��
�
ch06.p65 05/14/2002, 10:41 AM164
ANALYZING SURFACES 165
Setting specific values toNoData
1. Click the 3D Analystdropdown arrow and clickReclassify.
2. Click the Input Rasterdropdown arrow and click theraster with values you wish toset to NoData.
3. Click the Reclass Fielddropdown arrow and click thefield you wish to use.
4. Click the input boxes for theNew values you wish to turnto NoData.
5. Click Delete Entries.
6. Check Change missingvalues to NoData.
7. Optionally, click Save to savethe remap table.
8. Specify a name for theOutput Raster or leave thedefault to create a temporarydataset in your workingdirectory.
9. Click OK.
The values you deleted willbe turned to NoData in theoutput grid.
Tip
To change a value toNoData:����� ������&���F3�����G� ���� �������������� �������������� ���� � �������������3������
�
�
�
�
� � �
ch06.p65 05/14/2002, 10:41 AM165
166 USING ARCGIS 3D ANALYST
Converting rasters and TINs to vector data
Why convert from surfaces to vectors?
9�����������*+���#�����!������� �� �#�!�� ������������� ,������� ����"��� ���3�"����:1����3�?*-������ ��>�������"����:1���������� �������"���������������� ��1����� �>
Converting rasters to features
����������������������"��������������#�������#�������� �����
�> ��"�����������������#����������������� ���������A���"�� �3����3���������������� ��B>
�> ��"�������������� �����������>
�> 7��������������� ��������"�����������������������������������!�����!���� ��� �>
8�����!���3�����������"��������������"�� ��!���������������#������������#�"������ �>
Raster elevationmodel with continuousvalues and rasterconverted tocategorical values
Polygon featureclass created fromthe raster categories
Polygon feature classof vegetation typesand selectedvegetation that fallswithin a selectedelevation classpolygon
@�������������� ������� '������������� �����#�������#�!�������>�8�����!���3��������������������!�������������#�!�������"���������������!������������ !����>
Converting TINs to features
��"��� ����*+����#������� �"�"���#����������>�@������������������������������������ �������#�!��*+���#����3�����������������������"�� ��"�����#������ �������*+������� ���#����������>�@���������������������������#�����������������#�!���*+�G�������������������#�����������������#�!���������>
Raster elevationmodel and vectorvegetation featureclass.
@�! ������������������������#����������������������1����3$$$�!������ �����"�� ��������"�������� �����"������ ������>*���������������"�����"���������������� ��� ����������"�� �����3������������"�����������������������>
ch06.p65 05/14/2002, 10:41 AM166
ANALYZING SURFACES 167
Convertingsurfaces to vectordata����������������� �������������?����#����#����������� ����? ����������������������������� ���������
2��������� �������� ��� �������������������������������? ���%����#� ��������������������������������� ����������������������/�����������
Converting raster data tofeatures
1. Click the 3D Analystdropdown arrow, point toConvert, and click Raster toFeatures.
2. Click the Input rasterdropdown arrow and click theraster dataset you want toconvert to a feature.
3. Click the Field dropdownarrow and click the field youwant to copy to the outputfeatures.
4. Click the Output geometrytype dropdown arrow andclick the type of feature youwant to create from yourraster data.
5. Specify a name for Outputfeatures or leave the defaultto create a temporary datasetin your working directory.
6. Click OK.
�
�
�
�
�
�
ch06.p65 05/14/2002, 10:41 AM167
168 USING ARCGIS 3D ANALYST
Converting TIN data tofeatures
1. Click the 3D Analystdropdown arrow, point toConvert, and click TIN toFeatures.
2. Click the Input TIN dropdownarrow and click the TIN youwant to convert to features.
3. Click the Conversiondropdown arrow and click thetype of conversion that youwant to do.
4. Specify a name for the Outputfeature or leave the default tocreate a temporary dataset inyour working directory.
5. Click OK.
�
�
� �
�
ch06.p65 05/14/2002, 10:41 AM168
ANALYZING SURFACES 169
Creating 3Dfeatures������ ���� ��������� ��������)*��������+����������������������3*� ����� ��������������������� ��#�)* ���������������������������#���������������������������������������������������������� �������
��������������%������3* �������)*������������������������������������������� ��� ����� �������� ���������������������������������� ���������� �� ��� ������������������������� ����,������ �����������������
������������������&��� �������������� �����+��6���������������� ����,�&/������ �������� ���������������&����
Deriving existingfeatures’ height from asurface
1. Add the 2D features and thesurface to a map or scene.
2. Click 3D Analyst, point toConvert, and click Featuresto 3D.
3. Click the Input Featuresdropdown arrow and click thefeatures that you want toconvert to 3D.
4. Click the Raster or TINSurface button to set thesource for the features’heights.
5. Click the dropdown arrow andclick the surface that youwish to use.
6. Optionally, browse to thelocation where you want tosave the output feature classor shapefile.
7. Type the name of the output3D feature class or shapefile.
8. Click OK.Tip
Creating 3D graphics:�������������������������*�"�������������������������&�����������*��"�����������6��E0���� ��"����������&���* ���������������8��:����� ���&�� �������"�������������#��=������#��6�� ��
�
�
�
�
� �
�
ch06.p65 05/14/2002, 10:41 AM169
170 USING ARCGIS 3D ANALYST
Deriving existingfeatures’ height using anattribute
1. Add the 2D features to a mapor scene.
2. Click 3D Analyst, point toConvert, and click Features to3D.
3. Click the Input Featuresdropdown arrow and click thefeatures that you want toconvert to 3D.
4. Click the Input FeatureAttribute button to set thesource for the features’heights.
5. Click the attribute that youwish to use for the features’heights.
6. Optionally, browse to thelocation where you want tosave the output feature classor shapefile.
7. Type the name of the output3D feature class or shapefile.
8. Click OK.
Tip
Giving all of the featuresthe same z-value:����� ����%����� �������� �� ������ ���&����� ��������������������������"�����������������*������� �
�
�
�
� �
�
ch06.p65 05/14/2002, 10:41 AM170
ANALYZING SURFACES 171
Creating 3D features bydigitizing over a surface
1. Add the 3D feature class—anexisting feature class withone of the following geom-etries: pointZ, polylineZ,polygonZ—to which you wantto add features to the map.
2. Add the surface that you wantto use as the source for thefeatures’ height to the map.
3. On the Editor toolbar, clickEditor and click Start Editing.
4. If you have more than onefeature class on the map,identify the workspace of thefeature class in which you willbe creating new 3D features.Click OK.
5. Click the Interpolate Point,Interpolate Line, orInterpolate Polygon button,depending on the geometry ofthe feature class you arecreating.
6. Click on the surface andcreate the edit sketch for thefeature just as you would for a2D feature.
7. When you are finisheddigitizing, click Editor andclick Save Edits.
8. Click Editor and click StopEditing.
9. Click Yes to save your edits.
Tip
Selecting the surface tosupply z-values�������������� ���������������� ���������� ������������������ ���� ����������� ������� ����� � ��������� �� ������� ������������������ �����������
Tip
3D polygon featurelimitation ������ �������������!���������� ������������� ����� ��� ������� ���������� ����� ��������� ���������"����� �������� ����������� ��� ����������������!����� ������������ � ���� ����������������������������������� ������� �������� ��� �������������������� �#������� ����������� ����������!����
�
�
�
ch06.p65 06/17/2002, 2:59 PM171
172 USING ARCGIS 3D ANALYST
Creating 3D graphics bydigitizing over a surface
1. Add the surface that you wantto use as the source for thegraphics’ height to the map.
2. Click the Interpolate Point,Interpolate Line, or Interpo-late Polygon button, depend-ing on the geometry of thegraphics you are creating.
3. Click the surface at thelocation where you want tostart drawing.
If you are using the Interpo-late Point tool, a point willappear.
If you are using the Interpo-late Line or InterpolatePolygon tools, the first vertexwill appear. Click the surfacewhere you want to create thenext vertex.
4. Double-click the surface tocreate the last vertex andfinish drawing.
Tip
Selecting the surface tosupply z-values���&���������������� �� ��������� ��������$����������&��������� ����� �����"��# ��&�����������������������������������������������������&����������8*�������
Tip
3D polygon graphicslimitation����������������"�����&�� ��������������*��������������������� ������������� ����� ���������������� �������������4����������&�������������$���� ���������"������������&�� ��������������������������������� ���&����������&��� ���������������&��������������������� ����$��������3���������������� �����������&�� �
Tip
Using 3D graphics inArcScene:����� ����&�"�������������&��8����������� �#��=���� ����������� ���#��6�� ��
�
�
�
ch06.p65 05/14/2002, 10:41 AM172
IN THIS CHAPTER
173
3D visualization 7• Creating a 3D scene
• Adding layers and graphics to ascene
• Defining 3D properties for layers
• Using the 3D Effects toolbar
• Navigating through a scene usingthe Fly tool
• Setting bookmarks
• Defining properties of a scene
• Identifying and selecting features
• Managing viewers
• View settings
• Exporting a scene
• Printing a scene
?��$��%��������������������������%�����������$�#���#�������"�������$��%����#�����������%���������$���������'�����������##������*������#������������#��*��������������"�5����!��#�������������*���*�����%�����#���������*���������*�����������*�%���������*���������������������������������������������������#��������������**�������������%���'��$���������������*�������������%�"
����������������'���������������������������������������$����������������������������'��� ����#�����������������#�����������������"�+�������������������%��'���#��#�������*��������������������������������������"�+�������������*�������������������'������%������������'��������������#�������������������������*�����������'������&��%������������*��������������������"�+����������%�����������������������#���*�������������������*������'�������������%���*��������$��"
ch07.p65 05/15/2002, 12:55 PM173
174 USING ARCGIS 3D ANALYST
Creating a newscene� � ���� ����+��$������������� ���#� ��������� ��� � ������ ���������������� ��������������������� ���#�3*����)* ���� ������#� ��� ������ ������ �� ���� �� ��� ��� �� ������������� ���������)*������������������ ������#� ���� ���� ������ ���� �������� ����� ��� �� ������������ ������ ����� �������� ������������� ���� ���������� ������ �������� � �� ���� ���������� � ���������� �����#� �� ��������/���� � � �� ���#� ���� �������� %��������� � � �����
Adding data in ArcScene
1. Click the Add Data button onthe ArcScene Standardtoolbar.
2. Navigate to the surface orfeature data.
3. Click Add.
Adding data fromArcCatalog
1. Navigate to the data in theCatalog tree.
2. Click and drag it onto thescene.
�
�
�
�
�
ch07.p65 05/15/2002, 12:55 PM174
3D VISUALIZATION 175
Adding data fromArcMap
1. Right-click the layer in theArcMap table of contents andclick Copy.
2. Click the ArcScene windowto make it active, right-clickScene layers, then clickPaste Layer(s).
Tip
Why is the symbology ofmy layer different inArcScene?#���&�������������������������������� ������ �#��=��$#��0������$����#��6�� �������"���������������&����� �����������&��<�������� ��� �����?�������$�7����� $�� ���� ��� ����<��� �������&� �#��=���6�����&$�����&������&������&���� ���� �#��=��<������&��&����$�������� �<���� ��������� �#��6�� ���4������� #��6�� ���� ����&����*�����������&������ ��� �������������&��������������
�
�
ch07.p65 05/15/2002, 12:55 PM175
176 USING ARCGIS 3D ANALYST
Copying and pasting 3Dgraphics from ArcMap
1. Click the Select Graphicsbutton on the ArcMap Toolstoolbar.
2. Click the graphic.
3. Right-click the graphic andclick Copy.
4. In ArcScene, click Edit andclick Paste.
Adding 3Dgraphics to ascene���� ���,�� ����� ���� �� ����#� �������� ���� ��� ��������������������)*���������(���%����#������������������ �� ������ ������� ���;� ����� � � ����;� �� ���� ���;� ��������)*�����#����#����������� ������������� ��� � �� )*�+������ ����� ��+��6�������� ���� ����� ������� ��� )*���������� ���+��6��� ����+��$���
�
�
�
ch07.p65 05/15/2002, 12:55 PM176
3D VISUALIZATION 177
Feature data and 3D
@�!����������" ��� &��#����������3��������������#����3� ����������� "��" ��>
8������������ ##����#�!���#��������� ����������� ���� ������1G����3���������������� �������!���>�8���������� �������"����������A��!����B��������� 1���>
-!����� ����#��������!��� �������� ��3�� ��3��������>�2 ��#�������! ��������������!��� �����,�3��������������3����������� ��>�= ����! ������������������3������!�3���� ���� ���>2������! ��������������1 �� ���3���,��3�����! � ����� "������>��������� 1����#�#����������������"������������#�����������"�� ������ ����#�����#������>�-!��?*-�#��������������"�� ��"������ �������#��������!����� ����#C�#�����!���32 ��R�#��������������������������#��3�3&���� �����>�@�������&:"����� ��������!����������� 1����#�#���������� ���������#������� ������������>
U.S. cities, height extruded based on population in 1990Building footprints extruded by building height
-!�� !���#����������,����"�� ������ ����"����>�@������� ��" ���������#������� �������������1������ ���������� ������!>�*#����"������#����!����#����������3��������������"����� �����!�������&:"�����#������#������>��� �� ��������������������#������>�@�������������� ������� '����" ��� &�� !�������� ����>�*#��������������1 �� ���#������� ����3�������#���������!�� ���������� 1����������1 �� ����� ������!1���#���� ��>�@����������������#�������1�����������1 ������"���>
-!�� !����<����������" ������#������� ����������� ��&:"�������,���#�!��!������ 1����������������� ����"���>�8����!���3���! ������������������������������ ���� ����������� �����!���1���������� ������� �>
ch07.p65 05/15/2002, 12:55 PM177
178 USING ARCGIS 3D ANALYST
Defining thez-values for alayer'������������� ����� ������#������������������� ���������)*����0����� ��������� )*�������? ���%����#�����E#��������E#�������E#� �����������������?��� ��������������������)*��2�����7��������������9�����3*� ������������� ��� ������ ���������������� ������ ���� ������� ����������������3* ����� ���)*#�������� �� ��� ���� &/������
)*�+������ ����� ��� � �� ��� <������� ������� �%� ������������ �������������� ���� ����� ������������ ���)*����� ��� �������� �� ����3*� ��������)*������������� ��� ������ ������ ����� �#� ����� ��� ����� �� �������� ����� ��� ���� ��#� ���� %������� ��������� ��� ���� ���������� ����������#� ���� ���� ������ �����? ���%����#���� ���� �� ��� ������ ���� ���� ��#� ��� %���� � ����� � ��� ��� ���� ���� ���
���� ���� �� �� ��� ������ � ����� ������ ������ �� ��� ��� ���� ������� �����
Examining the baseheights of a layer
1. Right-click the layer and clickProperties in ArcScene orArcCatalog.
2. Click the Base Heights tab.
This layer does not havebase heights.
�
�
ch07.p65 05/15/2002, 12:55 PM178
3D VISUALIZATION 179
Setting the base heightfrom an attribute
1. Right-click the layer and clickProperties.
2. Click the Base Heights tab.
3. Click the option to Use aconstant value or expressionto set heights for features inlayer.
4. Click the Calculate button.
5. Double-click the field that willprovide the z-value for thefeatures.
6. Click OK. �
Tip
Using built-in z-values of alayer6����������������� �����*������� ��������������������&����&������� ��������������������������������������&��$�&�����������������������������&�1� �;$1��&� �;$����1��&�� ;��4����������"���������&�����������������&�����&��� �"�� ����� �� ������*������������������������������&��:����� ���������������������������������� ��� �����������������������&������ �������������������� �*����������&������ ��� �������������%���� ������*������$����%�������&���������������;��������/��������������������� �
��
�
�
ch07.p65 05/15/2002, 12:55 PM179
180 USING ARCGIS 3D ANALYST
7. Click OK in the Propertiesdialog box.
The 2D features are nowdrawn in 3D, using theattribute that you selected asthe z-value.
�
Perspective view of contours, base heights set using the contours’elevation attribute
ch07.p65 05/15/2002, 12:55 PM180
3D VISUALIZATION 181
Setting a feature layer’sbase heights using asurface
1. Right-click the layer and clickProperties.
2. Click the Base Heights tab.
3. Click the option to Obtainheights for layer from surface.
4. Click the dropdown list andclick the surface that youwant to use for the baseheights.
5. Click OK.
The layer is now drawn in3D, using the surface thatyou selected to provide thez-values.
�
��
�
�
ch07.p65 05/15/2002, 12:55 PM181
182 USING ARCGIS 3D ANALYST
Extruding the features ina layer
1. Right-click the layer and clickProperties.
2. Click the Extrusion tab.
3. Check the check box toextrude the features in thelayer.
4. Click the Calculate button tocalculate an extrusionexpression. �
�
�� �
ch07.p65 05/15/2002, 12:55 PM182
3D VISUALIZATION 183
5. Double-click an attribute youwant to include in theexpression.
6. Optionally, build a calculationthat includes the attribute.
7. Click OK.
8. Optionally, click thedropdown arrow to specifyhow the extrusion should beapplied.
9. Click OK. �
�
�
�
�
ch07.p65 05/15/2002, 12:55 PM183
184 USING ARCGIS 3D ANALYST
The features are extrudedinto 3D.
ch07.p65 05/15/2002, 12:55 PM184
3D VISUALIZATION 185
Raster data and 3D
9��������!�� !������� ����� �����#��������F����������3������� ������!� ����� ����� !����!������#����� ������������������<��1������ ������ ����#>�@����� !��"�����������������#������#����1������ ���������!1���3����� ��3�1��������� �3���F #�������#���<��&:� �����������'����� ����3��� ��F&:� ���"��� ��#����>
Terrain surface draped over a surface—itself
Aerial photo draped over a surface
Categorical raster draped over a surface
USGS quad map draped over a surface
9�������#�������� �������, ����#�� ���� ���A����#���B������1���������F#�����!���3����!�� ��������������3���!����������� !��������3���������!���3��������������#���#�����������F���������1��!������� �������������#���>�@����� ������������#����������� �����1������ ��� ��"�������#���!����#���������>��� ������1����"�����##��� "������#�" ��� & ����������� ��� ��1����������������������������#���>
ch07.p65 05/15/2002, 12:55 PM185
186 USING ARCGIS 3D ANALYST
Defining the 3Dproperties of araster layer'��� ���� ���� �� ����� ����� ������#����������������������������� ����� ����������� ����� ���� ��� ����� �� ���� ��������)*#����������� ������&/������� )*�+������ ����� ��� �� �� �� <������� ������ �%� ������������� �������������� ����� ����� ��������������)*��2��������� � �������� )*� �� ����������� ����� ��� �� ����� ������ ������ ���� ����� ��� #� �� ������ ��������������7����������09��� ��#� ��� �� ������� �� ������ ������� ��� �����
Tip
What is the RasterResolution?��� �&�����������������������������������$����������������������������>!H������&>!H������ �������������������� ����:����� ���� ������������� ��������������������&���% ��������������� �� ���� �����������������*�������� �������������� ������� ��#������� �������������� ������ ���������������� ������������������������ ������������������������������ ���
Setting a raster layer’sbase heights using asurface
1. Right-click the layer and clickProperties.
2. Click the Base Heights tab.
3. Click the option to Obtainheights for layer from surface.
4. Click the dropdown arrowand click the surface that youwant to use for the baseheights.
5. Optionally, click RasterResolution to set the resolu-tion of the base surface.
6. Click OK. �
�
��
�
�
�
ch07.p65 05/15/2002, 12:55 PM186
3D VISUALIZATION 187
The raster layer is nowdrawn in 3D, using thesurface that you selected toprovide the z-values.
ch07.p65 05/15/2002, 12:55 PM187
188 USING ARCGIS 3D ANALYST
Convertingz-units to x,yunits4��������� ���� ��� ��������������� ���� ������� ��� ���������� ����� ��� ���� �����%�������������>����#���� �����#� ����#� ���������� ��� ������� �� ����� ��� ��� ���#� �� &/���������� ������� �� ������� �%#�� ����� � � �� ��������������(���%����#������ ���� ���������� ������ ����������� ���������6�����7��69����� ��������������� ��� �� ��� �� ��������� ������ ������� ����������)*#���&/���������� ������� �������������#��������%������������������#� �������� ������ �� ��� ���� ��� ��� ��� �����������
Converting units
1. Right-click the layer and clickProperties.
2. Click the Base Heights tab.
3. Click the Z Unit Conversiondropdown arrow and clickone of the predefined typesof conversion.
If you need to apply a customconversion, click custom.
4. Optionally, if you’re using acustom conversion, type theconversion factor.
5. Click OK.
�
�
��
�
ch07.p65 05/15/2002, 12:55 PM188
3D VISUALIZATION 189
Offsetting theheights in a layer���� ���� ���� �� ������� �������� ��������� ����� �� �� �������� ��� ����� �� ����?������?�� ������ ����������� ������������������� �� ������� ������� )*�������&������ �� ����� ��� ������ ������� ��� ����� ��� ��#������ ����������� � � �� ������ � ������ ���#�����������&/������ �������� ��������������� ���� �� ����� ���� � ����� ��������������� ���
���� �� ���� � ������ � ��� ������ ������� ������� ������� ��� %�������#� ���� ��#� ��� &/������ � ������ ���� �������
1. Right-click the layer and clickProperties.
2. Click the Base Heights tab.
3. Type a constant value for theoffset.
4. Optionally, click the Calculatebutton to create an expres-sion to define the offset.
5. Click OK.
�
�
�
��
ch07.p65 05/15/2002, 12:55 PM189
190 USING ARCGIS 3D ANALYST
Controlling whena layer isrendered$���� ���� ����������������#� ���� �������� ��������� ���� � 5��� ����������� ����� ������,�� ��������� ����� ���� ��� ��������������������������������%��������� ������ ���������� ��� ����� �� � ��������#� ���� ����� �� �� �������� ������������������ ���� ������+����/�������������������� ������ ������� ���������� ���������� ���������� �� ����������� ������� �������������� ������%���������������� ��
Rendering a layer onlywhen navigation isstopped
1. Right-click the layer and clickProperties.
2. Click the Rendering tab.
3. Click the option to Renderlayer only while navigationhas stopped.
4. Click OK.
�
�
�
�
ch07.p65 05/15/2002, 12:55 PM190
3D VISUALIZATION 191
Rendering a layer onlyduring navigation
1. Right-click the layer and clickProperties.
2. Click the Rendering tab.
3. Click the option to Renderlayer only while navigating.
4. Click OK.
�
�
�
�
ch07.p65 05/15/2002, 12:55 PM191
192 USING ARCGIS 3D ANALYST
Using the 3DEffects toolbar������ ��)*�� ��� ��� ��#���� ���� ������ �� ����,�� ��������������������� ������� ���������� ������� �%����� �)*�� ��� ��� ��� ����!��������,�� ����������#� ������ �� ��� �������#� ����� ��� �������#�� ��� �����������#���� ����� ������ ��������
Turning on the 3D Effectstoolbar
1. Right-click in the blank areanear the menus and toolbarsand click 3D Effects.
The 3D Effects toolbarappears.
�
ch07.p65 05/15/2002, 12:55 PM192
3D VISUALIZATION 193
Using the 3D Effectstoolbar to set a layer’stransparency
1. Click the Layer dropdownarrow and choose the layeryou want to change.
2. Click the Adjust Tranparencybutton and move the slider toa value.
�
�
ch07.p65 05/15/2002, 12:55 PM193
194 USING ARCGIS 3D ANALYST
Using the 3D Effectstoolbar to adjust layerface culling
1. Click the Layer dropdownarrow and choose the layeryou want to change.
2. Click the Layer Face Cullingbutton and click the optionyou want to use.
The default setting is to viewboth sides.
3. Optionally, click a differentviewing option.
View only one side of a layerto make the data inside itvisible.
Using faceculling to controlthe way layersare drawn(����������� ������������ ��� ������������� �� ���� ��)*� ��� ��� ��������������� ������ � ����������� � ������ ���� ����� ��������� ���������������(���%����#�� �������� ���� ��� ��� ���������� ������������ ���� ��� ���� ���� �������#� ��� �������� �� ���� � ����������� ����� � � �������� ���� ��� ��� ���� ���������� �� ����� ���#� ������ &����� ������ � � � �������� %��
�
�
�
ch07.p65 05/15/2002, 12:55 PM194
3D VISUALIZATION 195
Using the 3D Effectstoolbar to change alayer’s drawing priority
1. Click the Layer dropdownarrow and choose the layeryou want to change.
2. Click on the Change DepthPriority button and move theslider to a value.
Changing alayer’s drawingpriority� � ��� ������ ������� �� ����������� ���)*�����#� �� ������� ������ � ������� ������������������������������ ��� ����� ��� �������������� ���� ���� �� ������������� ����� �� �#������� �� �������� �� �� �������� ��� ���� ������� �� ����� �������� �������������(��%����#� � � ����� ���� ��������� ���� ������������������ ��� ����#� ���� ��������� ���� ���� ��� �� �����#� ����������������������� � ���� ��� ��� ��� �� ����� ��������������� �����<��������������� � ������� ��� ���/ ��� ����#� ����� ��� ��������#�����#� ������0��
�
�
ch07.p65 05/15/2002, 12:55 PM195
196 USING ARCGIS 3D ANALYST
Viewing a scene from different angles
)����#���3����-������������ ������ ����#��" �� ����������3�1���������������!�� ����" ������ �����#���������>E�" ������ � ����" �������������#��������� # ��������#�!����1������������� ����� ������ �����������>
@�������" ����� �������������� �� �������" ������ ���F�����" ��� ����������������" ���� �� ������� ��������<������ �>�@������"���!�,������������������ �����" ����������" ����� ��������>
ch07.p65 05/15/2002, 12:55 PM196
3D VISUALIZATION 197
Managing sceneviewers6������������ ������������� ������ ��� ������ ������������������������ � ���������� �������������������%���&��������� ���������#�������&���������� ������� � �����#� ���������� �� ���� �������� ��&#��� ����� ��� �������
��� �������� � � �� ���� ������������ ���������
Adding a viewer
1. Click Window and click AddViewer.
Closing a viewer
1. Right-click the title bar of theviewer and click Close.
�
�
ch07.p65 05/15/2002, 12:55 PM197
198 USING ARCGIS 3D ANALYST
Managing viewers
1. Click Window and clickViewer Manager.
2. Click a viewer in the Selectviewer list.
3. Click Hide to hide theselected viewer.
4. Click Show to show theselected viewer.
5. If you have minimized aviewer, you can click Restoreto restore it to its previoussize.
6. Click Close Viewer(s) topermanently close theviewer.
7. Click OK to close the ViewerManager.
�
�
�
�
�
�
�
ch07.p65 05/15/2002, 12:55 PM198
3D VISUALIZATION 199
Changing theviewer settings���� ���� ����� ������ ��������� �� �� ���� ��� ����������� �����������
��������������������� ������������� ���� �� ��� ����/�������� �������� ��� �����/��� ��������� � � ������ �����������%��������������������������������������3*����
�������������� �� ������������������� ��������
���� ���� ����� ������ ���������� ������������� � ����������� �� ������%#�#&����������
���� ���� ������� �� ������� �������������������������������?�� �������#� ����#���� ����� ������ ��������� ����=���$������������ �%���� ���� ���� ����������
Setting a viewer to 2D
1. Click View and click ViewSettings.
2. If you have more than oneviewer for the scene, click thedropdown arrow and selectthe viewer that you want tochange.
3. Click Orthographic (2D view).
You see an orthographicview of the scene with noperspective distortion ofscale.
4. Click Cancel to close theView Settings dialog box.
Tip
Extruded points limitation7���������� ������ �������� ����������������
���&��� ��������������������� ������ �� ����������������$����&� �������������&��� ������� ��� ���� ����������� ������������&�
�
�
� �
ch07.p65 05/15/2002, 12:55 PM199
200 USING ARCGIS 3D ANALYST
Changing the roll andpitch of a viewer
1. Click View and click ViewSettings.
2. If you have more than oneviewer for the scene, click thedropdown arrow and selectthe viewer that you want tochange.
3. Click the roll slider and dragit to change the roll.
The artificial horizon and theviewer roll to the new rollangle.
4. Click the pitch slider anddrag it to change the pitch.
The artificial horizon and theviewer pitch to the new pitchangle.
5. Click Cancel to close theView Settings dialog box.
Tip
Why can’t I set the roll andpitch?������ ������������ �&���������� �������������� ������&�����������������������9����������$���������� ��������� ���������������
�
�
� �
�
ch07.p65 05/15/2002, 12:55 PM200
3D VISUALIZATION 201
Specifying thecoordinates of theobserver or target
1. Click View and click ViewSettings.
2. If you have more than oneviewer for the scene, click thedropdown arrow and selectthe viewer that you want tochange.
3. Type the x,y,z coordinates forthe Observer.
4. Type the x,y,z coordinates forthe Target.
5. Click Apply to set the viewerto the new observer andtarget coordinates.
6. Click Cancel to close theView Settings dialog box.
Tip
Finding a target’scoordinates��������-���6��� �������������� $����%�����0� ����� ������������� �����%��������� � ������ ��������������� ����� ����������$�� ��&����� �������$&$*����� ����
�
�
�
�
�
�
ch07.p65 05/15/2002, 12:55 PM201
202 USING ARCGIS 3D ANALYST
Navigatingthrough a sceneusing the Fly tool��� �� (��� ���� �� ������������ ���� �� ������ ������� ���������� ������������������������� ���������� ����������� ��� �����
Using the Fly tool tonavigate in a scene
1. Click the Fly button.
The cursor changes toindicate fly mode is active.
2. Click once in the center of thescene.
The tool enters the sus-pended state. You can pointthe mouse to look in alldirections, but there is notranslational movement.
3. Click the mouse to moveforward.
Right-click to move in reverse.Successive clicks in eitherdirection increase the speed.Speed is indicated in thestatus window.
4. Click the opposite button toslow down incrementally andthen stop.
Press Esc to immediately stopmovement in either direction.
�
Tip
Fine-tuning the fly speed� ������� ���������%$������������������� ���� ��������������������$����������&�
Tip
Looking up or down whileflying1���6�����������& ������� �� ���� �� ��������� ��:����� ���� �� �������������������� �������% ������������ ���������� � ������������ �����������
�
ch07.p65 05/15/2002, 12:56 PM202
3D VISUALIZATION 203
Settingbookmarks+����������� ���� ��� ����������� ������ ���������� �������� �� ���� ���� � ��������(���%����#���������������������)*� ���������� ���� ���������������� �� ����� ������������#� ��� ���������� ������� ����� ���#���� ���� ������ ����� �� ������ ���� ���� �� ���������� ������������������������)*� ��������� ��������������� ��� ����� ���� ������������ �� ��
��� ����� � ���������������� ���������������������� ���������� �����������������#������� ����������������������� ���� � ������� �� ��������
Creating a perspectivebookmark
1. Navigate to the perspectivefor which you want to createa bookmark.
2. Click the View menu, point toBookmarks, and click Create.
3. Type a name for the book-mark.
4. Click OK.
Using a perspectivebookmark
1. Click the View menu, point toBookmarks, and click thename of the bookmark youwant to use.
The bookmarked viewappears.
Tip
Using bookmarks insecondary viewers���������������������%���%� ����� ���&������$���������%�� ������������ �����%�?��%���%�
�
�
�
� �
ch07.p65 05/15/2002, 12:56 PM203
204 USING ARCGIS 3D ANALYST
Setting the properties of a scene
*�����-����3���������������� �������� ��F#�����!���3�"��� ������������ �3��� !��������� �3�1��,��������3�������3���� ��! ��� �������� ��F������������������������������������������ �� �� �>�@��������������!!������1�������������������� ����� ����������!>�*#��������������!�� ����" �����3������������ �������������������#�����" �����>
Vertical exaggeration emphasizes variation in a surface.
The background color can make visualizations more realistic.
Illuminating a scene from different angles emphasizes differentparts of a surface.
������1��#�����-�����2����� ���� ����1���������������"�� ����1��������������� ��>
ch07.p65 05/15/2002, 12:56 PM204
3D VISUALIZATION 205
Changing theverticalexaggeration=������ %��������� ���� ���� �� ������&� �� �������� ��� �� ��� ���� ����� ��� ��� ��� �����������������&�/������ � ���������� �����&����� %�� � � �� ��� ����� ����� ������� ����� ���� ������� � � ������� ������ ��� ���� ����+� ��������� ������%��������� ���� � ���� � ���� ��� ���� ��� ����� ������%�������������������
��� ������� %��������� ��������������������������������������%�������� ���������� �� ��������� ��� &/������������� �����
1. Right-click Scene layers andclick Scene Properties.
2. Click the General tab.
3. Click the Vertical Exaggera-tion dropdown arrow andclick a vertical exaggerationfactor.
4. Optionally, click CalculateFrom Extent to automaticallycalculate an exaggerationfactor based on the extentand z-variation in the scene.
5. Click OK.
�
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM205
206 USING ARCGIS 3D ANALYST
Using animatedrotation2�������� ���� ��� ������������������������� � ������������� �������� �� �������� ������� �� ������ ������� ������� ������� ���� ���
���� ���� ��!��� �� ���������� ���� �� � ����������������&�������������������� ���� �����
Enabling animatedrotation
1. Right-click Scene layers andclick Scene Properties.
2. Click the General tab.
3. Check the check box toenable animated rotation.
4. Click OK.
The navigate cursor has acircle around it whenanimated rotation is enabled.
Tip
Toggling animated rotationusing shortcut keys����� � ������ �����$�&����� �������� �� ������� ������������ ����������������&���� �0����� ��6������������% �� �����������
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM206
3D VISUALIZATION 207
Starting animatedrotation
1. Click the Navigate buttonafter enabling animatedrotation.
The navigate cursor has acircle around it whenanimated rotation is enabled.
2. Click the scene, hold themouse button down, drag tothe left or right, and releasethe mouse button while thescene is in motion.
The speed at which thescene rotates is proportionalto the speed at which themouse is moving when yourelease the button.
Click the scene to stop therotation.
�
Changing the rotationspeed
1. While the scene is rotating,press the Page Up key toincrease the rotation speedand press the Page Downkey to decrease the rotationspeed.
Tip
Starting animated rotationwith complex data�������������������������� �$����6�������������� �������& ����������� �&����� �������� �����������
�
ch07.p65 05/15/2002, 12:56 PM207
208 USING ARCGIS 3D ANALYST
Changing thebackground color��� ���������� ������ ������� ������� �� � ������������ ������ �� ��������������� �� ���� ����� �������&���������=������� ������ � � ���������� �� ����������������� ��� ������#������� ����� ���������� ���� �����������
���� ����5������� �� � ��������� �� ��� � � �� ���������������%��������������������������������� ������� ���������� ������ �� � ��� ���������������
Setting the backgroundcolor
1. Right-click Scene layers andclick Scene Properties.
2. Click the General tab.
3. Click the Background colordropdown arrow.
4. Click a color.
5. Optionally, click More Colorsto mix your own backgroundcolor.
6. Click OK.
�
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM208
3D VISUALIZATION 209
Setting the defaultbackground color forfuture scenes
1. Right-click Scene layers andclick Scene Properties.
2. Click the General tab.
3. Check the check box to usethe current color as thebackground in all newscenes.
4. Click OK.
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM209
210 USING ARCGIS 3D ANALYST
Changing thesceneillumination���������� ���&�������������� � � �� ����� �����#� ������ ��� �� ������ � � ������#���� ����������� �� ��������/����� �������������������/���� �������� ��� �� ��������� ������� � ������� ����#���������� %����� �������� ������� ����#� ����� ����
���� ���� ���������������������� ������ ��� ������ �������� �������� ��� ��� � � ��� �2������� � �� � �� ����,�<������� ������� �%�
Setting the illuminationazimuth
1. Right-click Scene layers andclick Scene Properties.
2. Click the Illumination tab.
3. Type an Azimuth for thescene light source.
4. Click OK.
Tip
Changing illuminationproperties quickly:����� ����%�� ������ �������� ����#*������ ��#��������� ����� ���������������&����� ���$ ���������&� �������� ������������������������� ��� �������� ������������ ��������������������� ������������������ ������� �
Tip
What is the azimuth?�����*��������������������� �������������������������� ��� ������� ��
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM210
3D VISUALIZATION 211
�
�
�
�
Setting the illuminationaltitude
1. Right-click Scene layers andclick Scene Properties.
2. Click the Illumination tab.
3. Type an altitude for the scenelight source.
4. Click OK.
Tip
What is the altitude?����������������������$�������� ���������������������*� $�������������������������� ��� ������ ��
ch07.p65 05/15/2002, 12:56 PM211
212 USING ARCGIS 3D ANALYST
Setting the illuminationcontrast
1. Right-click Scene layers andclick Scene Properties.
2. Click the Illumination tab.
3. Type a contrast value.
4. Click OK.
�
Tip
What is the contrast?������ ������� ������������� ������� ���������������������
��
�
ch07.p65 05/15/2002, 12:56 PM212
3D VISUALIZATION 213
Changing thescene extent2������� �� %�� � � �� ������� ����� ������� �� ����%������� �� �������� ���������� �������� �� �������
"��� ���#� ��%��� �������������� ����%��� ������ �� ������ ��� �� ������������������ �� %�� � � �� ���� � � ��������� ��%��� ���� � �� ����������� ����������� �����������������%����%/� ���� �/����������
*��� ��� ����� ������ � � �%�� � � �� ���� ��� �����������
Setting the extent to alayer
1. Right-click Scene layers andclick Scene Properties.
2. Click the Extent tab.
3. Click Layer(s), click theLayer(s) dropdown arrow,then click the layer you wantto define the scene extent.
4. Click OK.
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM213
214 USING ARCGIS 3D ANALYST
Setting the extent usingcoordinates
1. Right-click Scene layers andclick Scene Properties.
2. Click the Extent tab.
3. Click Custom.
4. Type minimum and maximumx and y values to define theextent of the scene.
5. Click OK.
�
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM214
3D VISUALIZATION 215
Changing thescene coordinatesystem� ���������������������������� ����� ���� ��� ����� ���� ���� ��������� ����? ���%����#����,������������������&����,�� ��� ��?������� !������� �� ���� ���������� ������������� �� ������������������������;���������� #� �����#� ���,�� ���������� ������������� � ������#���,��� ��� ������������������� ����� ���� �������� �� �����+��$��� ����������� ��� �����
'������������� ����� �� ������ ���#� ��� ����� ��� ���������� ����� ��� ����;� �������������� �� ���� � ���������+�� ���� ���� �� �/5��� �����#� ��� ��� ������/������ ���� ����� �� �� ���,���������� ����� ��� ����� ����,�� ������ �� �������������������� �� ����,�� ��������� �� ������ ��� �������������� ������ � � ��� ���,������ �� �������#�+��$������� ���� ��������������������������� �� ��������� ��� ������#� ���,��� ���� �� ������� ��������� ��������� ������ �������� ������ �
+��$��� %���� ������������� �� �������� �� � �������� �� ���� ������� �
Finding out whatcoordinate system yourdata is currentlydisplayed in
1. Right-click Scene layers andclick Scene Properties.
2. Click the Coordinate Systemtab.
The details of the currentcoordinate system aredisplayed in the dialog box.
�
�
ch07.p65 05/15/2002, 12:56 PM215
216 USING ARCGIS 3D ANALYST
(����� ����� ���������� ��#���� �� �������� �������� � �����,��������� (��� �������#���� ���#� ��0�#� ���� �����#�,�� ������������� ����� ����� ��������� �� ������ ����� �����������!� ���%������7 ��%����#� ������!9�� ���� ������ �������� ���;� ���� ��������������� ��� ��� ��������/��� ����� ��� ��� � � ������ ������������ ���� ���� ����!� �������+��-������
� � ��� ��������� ������ �������� ��� ������������� ����� �����#�+��$�������%����� �� ��������� ���������� ���� �����������������/1FB���1FB������ ���%/����������/GB���GB������ ���/������� � � ��� ��#�+��$��������� ��� ��� ��� ��/�������� ���������� � � ��������� ��������� � � �� ������ ����� ��� ���� ����#�+��$��������� ���� �� ������ ��������� %#�� ����������
See Also
4�������� ������� �� ������� ����&���$������������������� ����� ������
Displaying data with apredefined coordinatesystem
1. Right-click Scene layers andclick Scene Properties.
2. Click the Coordinate Systemtab.
3. Double-click Predefined.
4. Navigate through the foldersuntil you find the coordinatesystem you want and click it.
5. Click OK.
All layers in the scene willnow be displayed with thatcoordinate system.
�
�
�
�
�
Tip
Changing the coordinatesystem of a scene0�� � ����������� ����&���������� ������ ������������������� ����&����������������������� �� ��� ���
ch07.p65 05/16/2002, 2:50 PM216
3D VISUALIZATION 217
Selectingfeatures in ascene���� ��� ����������� �� ��� ����� ��� �� ����� ��������������� �� ���� ����� ���������������������������$���(����� ���� ��� ������������������� ��� ��'����� ���� ��� ����� �� ������������
���� ���� ����� ���� ����� ����� ��� ���������� ��� ����� ������������ ����� ����� ������(���%����#���������� ���� ���� � � �� ����������� ���,�� ������ ��� ��� �������������� ��� ����#� ������ ���� � � �� ��������� ����������� ��� ���������
Selecting featuresinteractively by clickingin a scene
1. Click the Select Featurestool.
2. Click the feature you want toselect.
The selected feature ishighlighted.
Changing the interactiveselection method
1. Click Selection, point toInteractive Selection Method,and click the selectionmethod you want to use.
Tip
Learning more aboutselection4�������� ������� ����������� ���������$���������� ����
� �
�
ch07.p65 05/15/2002, 12:56 PM217
218 USING ARCGIS 3D ANALYST
Selecting featuresinteractively by clickingon a table
1. Right-click the feature layerand click Open AttributeTable.
2. Click the row belonging tothe feature you want toselect.
The selected feature ishighlighted.
�
�
ch07.p65 05/15/2002, 12:56 PM218
3D VISUALIZATION 219
Selecting features bytheir attributes
1. Click Selection and clickSelect By Attributes.
2. Click the Layer dropdownarrow and click the layer fromwhich you want to selectfeatures.
3. Click the dropdown arrowand click the selectionprocedure that you want touse.
The default selectionprocedure is to create a newselection, but you can alsoadd to, remove from, orselect from the currentselection.
4. Double-click the attributefield that you want to selectfrom.
5. Click an operator, for ex-ample, the equals sign.
6. Double-click a value.
7. Optionally, click Verify tocheck your selectionexpression.
8. Click Apply.
9. Click Close.
The features are selected.
�
�
�
�
�
�
� �
ch07.p65 05/15/2002, 12:56 PM219
220 USING ARCGIS 3D ANALYST
Selecting features bytheir location
1. Click Selection and clickSelect By Location.
2. Click the dropdown arrowand click a selection method.
3. Check the layers whosefeatures you would like toselect.
4. Click the dropdown arrowand click a selection method.
5. Click the dropdown arrowand click the layer you wantto use to search for thefeatures.
6. Optionally, check to use onlythe selected features.
7. Optionally, check Apply abuffer to the features in<layer> and set the distancewithin which to search forfeatures.
8. Click Apply.
9. Click Close.
The features are selected.
�
�
�
�
��
�
�
ch07.p65 05/15/2002, 12:56 PM220
3D VISUALIZATION 221
Exporting ascene��������%������3*������� ������ ������������� ��#�����������%������)*�=������2����6�������:������� 7=26:9������ ������ � � ����� ���� ����� ���������������� �� ������ ���� ������ ��� ����������? ��� %����#� ������� ��� ������
Exporting a 2D graphic ofa scene
1. Click File, point to ExportScene, and click 2D.
2. Navigate to the locationwhere you want to save theimage of the scene.
3. Click the dropdown arrow tochoose the graphics fileformat to export.
4. Type the width of the ex-ported graphic in pixels.
5. Type a name for the graphic.
6. Click Export.
The scene is exported to a2D image.
Tip
Taking a snapshot of ascene6�������&���'��� ������)��% ������������� ���0��%�7���� ����%�0��&��� ���������������:���� ���� ���������� ������� ����������������������� ��
�
�
� ��
�
ch07.p65 05/15/2002, 12:56 PM221
222 USING ARCGIS 3D ANALYST
Exporting a 3D VRMLmodel of a scene
1. Click File, point to ExportScene, and click 3D.
2. Navigate to the locationwhere you want to save theVRML model.
3. Type a name for the VRMLfile.
4. Click Export.
The scene is exported to aVRML file.
�
�
�
�
ch07.p65 05/15/2002, 12:56 PM222
3D VISUALIZATION 223
Printing a scene����� ���� ��� � �� ����� ��� ������� ���� ��������� ������������������������� ��� ����� �������������� ��� ���� ��� ������ ������� ������ ��� ������� �������������� � � �������� ���� �������� ��� ���� ��� ���� ������ ��������
1. Click the Print button.
2. Optionally, click Setup.
3. Optionally, click thedropdown arrow to select aprinter.
4. Optionally, click thedropdown arrow to select apage size.
5. Optionally, click Portrait orLandscape to select thepage orientation.
6. Optionally, click thedropdown arrow to select aprinter engine.
7. Optionally, click OK.
8. Click OK on the Print dialogbox.
�
�
�
�
�
�
�
�
ch07.p65 07/10/2002, 12:48 PM223
ch07.p65 05/15/2002, 12:56 PM224
IN THIS CHAPTER
225
Animation 8• ArcScene animation
• Creating animations
• Capturing perspective views in ascene
• Recording and playing backanimation tracks
� Creating keyframes
� Making group animations
� Making animations from paths
� Using the Animation Manager
• Timing properties in theAnimation Manager
• Saving an animation
� Sharing animations: Loading anArcScene Animation file
��������������� ������������������������������������������������������ �������������������� ��� �������������������������������������������������������������������������������������������������
�� ��������������������������������� ��� �������������������������������������������� ������������������������������ �����������������������������������������������������������
�� ���������������� �������������������������� ������������������������� �������������������������������
����������������������������������������������������������������������������������������� ������������������ ����������������������������������������������������������� ���������������������������������������������� �������������������������������������������������������������������������� ���!�������� �������������������������������������������������������������������������������� �������������������������������
����������������������������� ������������� ���������������������������������������������������������� ���� ��������� ���������������������������!����������� ���"����#���������$����%���������������������������&�����������������
��������������������������� �������������� ��������'��������������� ������������������ �� �� ����������������������������������������������� ����� �����������
Ch08.p65 07/18/2002, 2:05 PM225
226 USING ARCGIS 3D ANALYST
ArcScene animation
���-������������������3���"�3������������� !�� ��>�@������������� !�� ��� ��� ##����������3��!�� ��������� !�� ��#!�� ��������,��������� !�������������������� ��3��������3��������!���>������ !�� ��!���1����"��� ������������!���3���"�������� ��������������-������� !�� ��A>���B�# ��3��������������>�" �# ��>�@������������� !�� ���1��������� ����������!����3� ��������� ���>����# ���3���� ��� 1� ���>�" �# ���>
The camera and the target
@�" ������������������" �������!����>�����!���<������ � ����# ����1������1���"����������>������������#����" ��� ������������������>�*!�� �������������� �������������!��������>�������" ������������������3���������������!" ������1���"��� ����G��� ��� �������������>�*#�����������������������������3������� �������������� ���� #�����������������#���" ��>������� �����������!���3�1���"��3���������������� �����" ����>�8�! � �� & ��������#�� ���������!���3�1���"��3������������ ������������ ����1��������������� ���#��� !�� �>
Introducing the Animation toolbar
������ !�� ����1��������������������<������������,�� ���� !�� ��� �����-����>�7� ������������3��������������" ��� �3���������������� "��" ���3���"����������������,�3�������" ���# ���3�!�,�������� !�� ��3������������,��#�!�����3�����!�������������" �������� !�� ��>
Creating an animation
@������������� !�� ��1���!�� �����������,�� ��� ������� �>@�����!�,������,��1������� ���������#�,��#��!��3������ ����� ��3��������� �������" � 1 � ���#������#�������3���� !��� �������������������� ��!"�!���>�7��������� !�� �5����������� ������,������,��#��!����������� &������������,�� ������� !�� �� ��������� ������������>
Saving an animation
�������������������������"������� !�� �>�����������!����� ����!�� ���������������� !�� ������� ��������������������!���� ����"��>�*����� � �3���������"�������� !�� �����,�������>����# ��>�8 �����3��������������������������" ��1������� ��������� !�� �������>�" �# ��>
Ch08.p65 05/15/2002, 2:41 PM226
ANIMATION 227
Sharing animations
@������������� !�� ���1����� �������������!������������ �������� !�� �3���� ���>����# ���� ������-����3����" �� ���>�" �# ����������������������#�!��� !�� ��>�7�������������������!����� �������� !�� ������!�������������� ����� �������������>�*�����������>����# ��������1����������!�������#����������1 ��������������� ���� !�� �����������1��� � &���� ���"�� � ����>�-�������>�" �# ���#��� ����:���#���3� ��������� ������ !�� ������������1��������� �������� !������ �������"�� ����� �������������������' �,�����!�����������1��!��������������1�����������! �����>
Ch08.p65 05/15/2002, 2:41 PM227
228 USING ARCGIS 3D ANALYST
Turning on the Animationtoolbar
1. Click View, point to Toolbars,and click Animation.
The Animation toolbarappears as an undockedtoolbar.
Creatinganimations������ ���� ������� ���� � � ������������� ���� ���� ����������� ��� ���������� ����������������� ��������������������� ������������������� ���� �������� �� �� ��������� ������� ����� � ��������������� ��� �� ������� �������� ��� �������� ������������ �� ���������� �������� �� ��������� ��������� ����� �� ����� ��� ���� ���������� ����� ����� �� � ��� ��������������� ������� ��
�
Ch08.p65 05/17/2002, 7:32 AM228
ANIMATION 229
Capturingperspectiveviews in a scene�����-�����=������������ ���� �������� ����� ���� ������������������������������������������ �������������� ��� ��� ����#���������� ���������������(���%����#������������ �� ����� ��� ����� �������#� &������� ��� ������� ������� � � ����� ������ ������
Capturing views to makean animation
1. Navigate to the perspectiveyou want to capture.
2. Click the Capture Viewbutton.
3. Repeat to capture moreviews as keyframes in acamera track.
Clearing an animation
1. Click Animation and clickClear Animation.
All animation tracks areremoved from the scene.
See Also
������� �����������&����%�� � ���� �����%$����E������ �� �����& �����%�� ���� �����%8 ������������
Tip
Is there a shortcut tocapturing views?��������������������� �� ���� $����0���I#� �����������% �����0�������-�������� �
�
�
�
Ch08.p65 05/15/2002, 2:41 PM229
230 USING ARCGIS 3D ANALYST
Playing back ananimation
1. Click the Open AnimationControls button.
2. Press the Play button.
The animation is playedback.
Recording navigation tocreate an animation
1. Click the Open AnimationControls button.
2. Click the Record button.
3. Navigate in the scene usingany navigation tool.
4. Click the Stop button.
A camera track is created,storing the navigationsequence.
Recording andplaying backanimation tracks$����� ��������� ���� ���� ������ ������� ������ �������� ����� ����=-2��<�����2����� ���� �� ������ �������������� ���� ����� �� <��� ���� �� ����� �� ����
Tip
Controlling playback andrecording options0��%�9��� �� �����# ���� 0� ��������������������� ���� ������� $����� ����� ���� �������&����%$����� �����$�� ��������� ������ �
Tip
Recording Fly toolnavigation:����� ���%������&�&�� ���� ��&������ ����&�����&���������&����� ����������4�&������
�
�
��
�
�
Ch08.p65 05/15/2002, 2:41 PM230
ANIMATION 231
Creatingkeyframes�� ����� ��� ����� ��������� ����� � � ������������+������� ��� ����������� ��������� ������-������ ���� ���������������� � ��� � !�,�� ������������� ����� ������ ��������� � ���� �������#� ������������#� ��� ����� �������#����� ��� �� ���,�� ��������������#� �� ����,�� ����������#� ���������,�� ��������
Creating a keyframe ofscene properties
1. Right-click Scene layers andclick Scene Properties.
2. Set the scene property orproperties you want tocapture.
3. Turn on the Animationtoolbar, click Animation, andclick Create Keyframe.
4. Click the Type dropdownarrow and choose Scene.
5. Click New to create a newscene track.
6. Click OK.
7. Click Create.
8. Click Close.
You can repeatedly change aproperty and create a newkeyframe without closing theCreate Animation Keyframedialog box. Note that youneed at least two keyframesto create a track that willshow change.
Tip
How can I edit keyframeproperties?:����� ����������������������%�&�������&�� ������# ���� =� �����
��
�
�
�
�
��
Ch08.p65 05/15/2002, 2:41 PM231
232 USING ARCGIS 3D ANALYST
Creating a keyframe ofcamera properties
1. Navigate to the cameraposition you want to capture.
2. Click Animation and clickCreate Keyframe.
3. Click the Type dropdownarrow and choose Camera.
4. Click New.
5. Click OK.
6. Click Create.
7. Click Close.
You can change a cameraproperty by navigating to anew position and then createa new keyframe repeatedlywithout closing the CreateAnimation Keyframe dialogbox. Note that you need atleast two keyframes to createa track that will show change.
Tip
How else can I create akeyframe?�������������� ����� ������� ���������� ��������������������������������������������������������������� ������������������������� ����������� !���������������������"�
Tip
Using bookmarks askeyframes# ����������������������������������������������������������� ����������������#����� �����������������������������������������������$������
�
�
�
�
�
� �
Ch08.p65 07/10/2002, 1:23 PM232
ANIMATION 233
Creating a keyframe oflayer properties
1. Change the layer propertythat you want to capture.
For example, turn on the 3DEffects toolbar and set atransparency for a layer.
2. Click Animation and clickCreate Keyframe.
3. Click the Type dropdownarrow and choose Layer.
4. Click New.
5. Click OK.
6. Click Create.
7. Click Close.
You can repeatedly change aproperty and create a newkeyframe without closing theCreate Animation Keyframedialog box. Note that youneed at least two keyframesto create a track that willshow change.
�
�
�
�
�
� �
Ch08.p65 05/15/2002, 2:41 PM233
234 USING ARCGIS 3D ANALYST
Making groupanimations����������������������� �������%������������������������������ ������������ �� ����(���%����#��������������������� ����� ��������� ���������������� ������ ��������� ������� � ��� ���������������5�������� ��� ����-#� ������� ���� ������ ��� �����/������ �������� ������������� ������� ����������� ��������������������������������������������� ����-#���������� ������ ��� �� ����� ���������� ���������� ���������������������������������� ������� ���
Making a groupanimation
1. Click the Add Data button toadd the layers or group layerthat you want to animate.
2. Click Animation and clickCreate Group Animation.
3. Optionally, choose a Basename for tracks.
You are provided with adefault name for the tracks,but you can change it tosomething more meaningful.
4. Optionally, set the beginningand ending times.
Setting these times allowsyou to determine when thegroup animation will playrelative to other tracks thatmay exist.
5. Select a group layer. You canclick a group layer or all thelayers in your scene.
6. Optionally, changeTransitions.
These options will help youdetermine how layers in ananimation change from oneto another.
7. Optionally, uncheck Over-write existing tracks withsame name to add additionalgroup animations.
8. Click OK.
�
�
�
��
�
�
�
Ch08.p65 05/15/2002, 2:41 PM234
ANIMATION 235
Makinganimations frompaths������������ ������ �������������������� ����������+���� ��� � ���� �� �� �������� ��������������#����� ��������� ��� �� ������������/��� ������ �� ��������+������ ����� �������� �������� �� ������ ������ �����������+� ����� ����� ������ ���������������������������
��� �� <��� ��������������� ��� �� ������ �� ����������� �� �������������7� ����9� ������� ���� ����� ������� ���������� ������������������������ ���� ���� ���� � ����� ����������� ����� �� �#������� ����� ������ �� ��������� ������ ���� �� ����� ������������������������
Making a camera flybyfrom a path
1. Click a selection tool andselect the line feature orgraphic you want to use as apath.
2. Click Animation and clickCamera Flyby from Path.
3. Optionally, check Apply inreverse order.
The camera will begin at theother end of the path.
4. Optionally, type a value in theVertical offset text box.
An offset defines the heightof the camera.
5. Optionally, slide thesimplification factor.
The simplification factordetermines how much thepath will be generalized forthe animation.
6. Optionally, choose a pathdestination.
Change the path destinationto determine how theobserver and target arepositioned during theanimation.
7. Optionally, uncheck Over-write last imported track.
Disabling this option willallow you to add tracks toprevious ones.
8. Click Import.
Tip
Modifying cameraproperties��� ������ ����&�&������������������� ��� $����%�9�� ���� 6��� �� �����0������4�&�&�����1���������������������&�������&��������*����$� �� ��� $�� �������������������������������������������
�
�
�
��
�
�
�
Ch08.p65 05/15/2002, 2:41 PM235
236 USING ARCGIS 3D ANALYST
Moving a layer along apath
1. Click a selection tool andselect the line feature orgraphic you want to use as apath.
2. Click Animation and clickMove Layer along Path.
3. Click the Layer dropdownarrow and choose the layeryou want to move.
4. Optionally, check Apply inreverse order.
This option will start the layermoving from the oppositeend of the path.
5. Optionally, type a value in theVertical offset text box.
The vertical offset determinesthe height of the layer.
6. Optionally, slide thesimplification factor.
The simplification factorindicates how much the pathwill be generalized when it isused for the animation.
7. Optionally, uncheck Over-write last imported track.
Disable this to allow addi-tional layer tracks to beimported without overwritingexisting ones.
8. Click Import.
����� ������ �� ���#� �������� ���� ������ �� ��������� ������ � ����� �� �� ������� ������������������������� ������ ��� �� ������������� ��������� �������������� ���� �� ���� �� ���������� ������ �� �������� ������
Tip
Using advanced layerorientation settings0��%�9�� ���� �6��� ���������&������&�����&��8��*����$� �� ���� $�� ��������������������������������������������
�
�
�
��
�
�
�
Ch08.p65 05/15/2002, 2:41 PM236
ANIMATION 237
Using theAnimationManager���� ���������� ������ �������� ��� � �� ���������� ���������� ���� ��� ��� ������������ ��� ��� � �� ��������������������� ��� ��������������� ���������� ���� ����� ��������������������������������������
Using the AnimationManager to accesskeyframe properties
1. Click Animation and clickAnimation Manager.
2. Click the Keyframes tab.
3. Click the Keyframes of Typedropdown arrow and choosethe type of keyframe youwant to examine.
4. Click the In Track dropdownarrow and choose thespecific track you want toaccess.
5. Click a Keyframe property tochange it.
6. Press Enter.
7. Click Close.
Tip
Why change a track orkeyframe property?��������������� ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� ������������������������������!�����������������
Tip
Updating a keyframe"����������������������������������������������� ������������������������������ ��������������������#������������������������������������������������������������"���������� ���$�������������������������������
�
�
� �
��
Ch08.p65 07/18/2002, 2:05 PM237
238 USING ARCGIS 3D ANALYST
Using the AnimationManager to access trackproperties
1. Click Animation and clickAnimation Manager.
2. Click the Tracks tab.
3. Optionally, check View onlytracks of type, click on thedropdown arrow, and selectthe type you want toexamine.
4. Click a Track property tochange it.
5. Press Enter.
6. Click Close.
Tip
Changing a track’s priority����������������������� ������%�������������������'���$����&����������&������%������� ��������������&�������� ���������%8�����&$���������������%� ��������%�������������# ���� =� ������ ����������������������� ������ ������������� % ���������������&�������%�������������������&��$��������� ������� ����������� ���
Tip
What is binding?����%�������� �������'�����4���������$��������������%����� ���������������������$�� ����������&� ������������������� ��������'�����������������%����� ����$���%�? � ��
Tip
Can I interact with ananimation track?:����� ��� ����&������������������������%����������&��$�����������$���� ���������� �� ���� ��6������������%�� �����%1�������������������������������������������������%��/ ����%����� ��&����� ������� ������ ����&�
�
�
�
��
Ch08.p65 05/15/2002, 2:41 PM238
ANIMATION 239
Using the AnimationManager to modify timingproperties of tracks
1. Click Animation and clickAnimation Manager.
2. Click the Time View tab.
3. Optionally, click the Plus orMinus buttons to change thetime scale.
Reducing the time scalegives you a more detailedview.
4. Optionally, check Viewenabled tracks only.
Using this option shows onlythe tracks that are currentlyenabled. Disable a track inthe Tracks page.
5. Click and drag a greenkeyframe box in a track tochange the time when it willbe played.
Moving a keyframe to a laterpoint in the track will make itbe played later in theanimation.
Click and drag a keyframe atthe start or end of a track todetermine when that trackwill play relative to others.
6. Click Close.
Timing propertiesin the AnimationManager���������=�������� ��+��������6������ ������ ������� ������ ����������������� ������ �� ����� ��� �������&� ���� ������ �����������&������ ��� ������
'������������=������#��������� ��������������������&�������������#������� ��� ��� ����������� ������������ �� ������������ ��� ��+��������-������������ ������� �%� �� �������������������������������������
Tip
Previewing an animation� ���������-�������$�&����� ���� ��&����� ���� ��&����% ���������&�� ������������������ ��������� ����� ������ ������� �����������������&�&����� ���� �������&�
Tip
Why are my layer trackscolored differently?� ���������-�������$���������&������%�������������������� ��������������&����������� ���� ������&��������.����� ����������������&���� ����.�� ������&����������&���% ��������������&�������� ���� �$���� ��� �� �������&�
�
�
�
�
� �
Ch08.p65 05/15/2002, 2:41 PM239
240 USING ARCGIS 3D ANALYST
Saving an animation in ascene document
1. Click the Save button.
An existing scene documentwill be appended with theanimation, or if none exists,you will be prompted toprovide a name for a newdocument that will containthe animation.
Saving ananimation������������� ���� �� �� �� �� ����� � ������� ���� ������ � � � � �� ���� �� �������������� ������ ���� ���� � � �� ������ ��� ��� � �� ��� ���� ��� ����� �� ���� ��� �� � ����������������� ��������������������� �
Saving an animation byexporting tracks to anArcScene Track file
1. Click Animation and clickSave Animation File.
2. Click the Save in dropdownarrow and choose a location.
3. In the File name text box,type the name you want togive the animation file.
4. Click Save.
�
�
�
� �
Ch08.p65 07/19/2002, 1:41 PM240
ANIMATION 241
Exporting an animationto a video file
1. Click Animation and clickExport to Video.
2. Click the Save in dropdownarrow and choose a location.
3. In the File name text box,type the name of the videofile you want to create.
4. Click Export.
A .avi file of the given nameis created in the specifiedlocation.
Tip
Using advanced videooptions�������������������� ������)����&���������$����%�9��� �� ����6�� ��-����7����������������
Tip
Preventing extraneouswindows from appearing invideo files=�%�������������� �&���������&����� ���� ���������������&�������������� �������&�� ��� ���������������������������& ������� ���� ��9������$���&���&�������� �����������������
�
��
�
Ch08.p65 05/15/2002, 2:41 PM241
242 USING ARCGIS 3D ANALYST
Sharinganimations:Loading anArcSceneAnimation file���� ���� ����� �������� � ���������� ��� � ����� ���� � � ���� � � � � �� ��� �����!� ���������������������������� �� � � ��� � ���� � � ��� �� �� ��� � ���� � � �������������� � ��� � � � � �� "�� ������������������� � ���������� ����� �� ���� ������ ��� � � � � � ����������������������#�� ����� ��������� ��� �� �������������� ���������!� �� ���������� � �������� ��������� ������� � � ���� ��� �� ���� � �� ��� ��� � � � �� � � � �������� ����� ��� ������������� �$%&��' ��� ������ �������� � �� ����� ��� ����������!� ��������!����� �$%& �� ���������������� ���������� ��� ��� ������������� � ���� ������������� � ������!� ��� � �� ��� � ���
Loading an ArcSceneAnimation file
1. Click Animation and clickLoad Animation File.
2. Browse to the ArcSceneAnimation file you want toload.
3. Click Open.
Tip
Identifying ArcSceneAnimation files��������������� �����������������������������������
�
�
�
�
Ch08.p65 07/19/2002, 1:41 PM242
ANIMATION 243
��-������ ����+���#�� �������� ��� �� �� ����� ��� ����,%��� ��� ��������#� �������������������������������#�� ���,��������������� ����� ���� ���,�� %�� �������� �������������������#�������� �� %�� � � �� ��� �����������#���������������������������������������������� ��� ��������������� ��� ������������� �������� ���� ������� �������,�%��
Tip
Using animations stored ina scene document��������� �������� ������ ���� � ���#��6�� ����&��������� &��������� �������� ��=���&����� ����&���������� �������� �������� ��������������% �����������&��� �� � ���� �
Ch08.p65 05/15/2002, 2:41 PM243
Ch08.p65 05/15/2002, 2:41 PM244
245
123D feature������������� ��#�������:�����1G���� ����!������������ ���&:"������������ �� ������#�����<���!����>�8���������"����!���������!���������"������ 1���������� ����#��������1��>�2 ��R32��� ��R3�2����R3�����5�� ������#�����������������������# ����!������� �����#������>
3D graphic������� ��1G���� ����!������������ ���&:"����������� ����������� �<����!����>�?���� ���������"������ 1���>
altitude�> ������ ���3�&:"���3���"��� �������"�� ��#����1G�����1"�3���1���3���� "�����#����������!F
#�����!���3�������"��>
�> ������ �����1"�������� &�F!������� ���������F#�!��� ������ ��������� ��! ���������#���C����������������� ������ ����������#�������� ��������� � ��#������ ��������� ������������#���:���:#������� ��>
animation�������� ��#�����,�� �����������������# ��������! �������������������������������� ����1G����>
Animation Manager���� ����#��������������������� ������������ ���#�,��#��!��3�����,�3������ ! ���#������ !�� �>*�������������������" �������� !�� �>
ArcScene������?*-����� ��� ��#���!1 � �������" �� ���#������3���#����3���������� ��� ������������ "�>
area�> �������� !��� �������#���������#����������#���>
�> ������#���������#��������#������#�������� ��#�����#�����1"����1��������#������������>-�#���� ��!���������������������#�����#�������� ��������������������������������� !��� ��������#�������#���>�������!���������������� !��� ������3���#���������� "�������� ����#������#�����������>
Glossary
Glossary.p65 05/15/2002, 2:54 PM245
246 USING ARCGIS 3D ANALYST
aspect����� ���� ���������#����>������������#�����*+�#���� ����������������������� ���� ��#�����#���>�������������������� ���������� ������������������������ ���� ��#�����������# ����1�������������� ���� ��������� ����� ��1��>
attribute��� ����#� �#�!�� ������� 1 �����!���#�����>��������� 1����#�������������3�#�����!���3�! ���� ������ �������3������ �3�����"������������� ��� ��!�>
autocorrelation�������� �� ��������� ��� ���!�������!�������� ���3����������������� ����������������� ����������S��� ���� ������������������������ ��>
azimuth���!������ ���� �>�*��������������������?*-�-��� ����������3����� ���� ��#�!��� ������ ��������� ��! ����������#���� �������������& !��>
background�> @�����������������#�����1��,�����#�����������������
�,�3��!���������3����������������� ������" ��� &�� ������>�������#����1��,��������� ���� ��>
�> -!���������3���� ������ !����3���"��1��������������������� ���#����������#���� ��� !���������������������>��� ������ ��#������� ����������1 ������"���F#����1���,3������>@���������������� ������#�������������#����������1������ ������1��,���������������-�!1������1�#�����=����2����� ���� ����1�>�-������������>
base height������ ��������� �������#���3�������3���#������ �������� ��������>�@�������������1������ ����#��#�������������������#�!��
��#������1��� �������������"������������� �>�8�������� ��&:"����������� ����� ����!�����������"����� ��1������ �������� �������&:"����>�-��� �������1������ �����#�!�����#���� ���������������� ��>
bin������� # ��� ��#�����3�����������������������"��� ! ����� ����������� ���� ��������� ���������!��1 �>�) ��������!!���#�!���1��� " � ���������!��������� ����� ����������������>
camera���1G�����������# ���������������� "��#��������<��� �����>
Catalog tree���� ���������#�#����������� ����������" ������������������ ������������� ��#�������������� �,���������������������,>�*������ �������#�����������������!����������1��������� ���������� ����������!�>�������������������" ������ ������ ����" ���#������������ ������� �������#�����>
categorical raster����������������������������������� ���������#�"������������"�1��������������� ����������>�8�����!���3��������� ��� !������������1����������� # ����������������!1���#�������"��������� ��������� ����������>������� �����������������������������3�1�����"����������#�!������ �����#���>�-���������>
continuous raster����������������������������������� ���������#�"����������"������ �������#�!�����#���>�8�����!���3����������� � ������"�� ��!����������� ��������������! ������������� ���#����������� ����������>
contour��� ����������������� ����#��'���"������������� ����#����A�� �� ��B>
Glossary.p65 05/15/2002, 2:54 PM246
GLOSSARY 247
drape����������1������ ����#��#�������������#����� �������#���>���������������������"��������������#���3���������� ��#����1������#���� ����!�� �����������!������� ����������#�!����>�@��������������������� ��#�����1������#���� #������#���� ������ �#�����>
drawing priority��������� ���� ��������������������������!���3�3&��� � ������������ ���������>�8�����!���3� #�����"��������#��������������������������������"���������!������� ��!���3��������������������!�������������������1�,��������������� �� ��>�@������������������ ����� � ���#��������������� ��� ���������1��������#������>�@������������������������ ����� � ���#�������#�������������#����>
edge����� ��������!�����1������������ �����*+���#���>����������� �#�!�� ���1������#���������������1����>�= �����#����������������� !������#�������#�������������������������*+1��!�������� �������*+>
extrusion@���������������� ��3�� ��3����������#������� ���������� ��"��� ����� ���3�������3������� ��>�7�������� �����������������#������� ���#��������������� ����#�1 �� ���#��� ��������>
face�� �������#�!�����#����������*+���#���>������#���������*+��#���� ����# ����1��������������������������������� ����G�����������������������#�������������#���>��*+�#��������������������������������������� �#�!�� ������!�����"�����������"����>
grid��������� ������������� ��#����������������������#��'����� &����'������������������� ������������!��>�������� ������� ���#��������1�� ���������� ���3������ �>�-���������>
hillshade����������� ���� ��! ��� ��#�����#���>���� ������������������1������������#����� "�����#���3���� ������ �������1������ ��������#�������#���������������#������� ���������>
IDW*�"������ ��������� �����>���� �������� ��!���������������"������������ !�����1���"���� �������"�����#���!��������� ���� ������" � � ���#����������>�������������� ��� ��������������#����������1� ������ !����3�����!��� �#�����3����� ���3� ����� �������"���� ���������>
image9����������������� ��#�������1��� " � ������������ ��� ��������'�����������������>����!����� ������������ ���������� �����������3�����������!����3�����1 �� ������������>-�������������>
interpolate������ ���"�����#������#����#�!���� ! �����!1���#���!��������� ���>
keyframe*������� !�� �3�����������#����1G���<�������� ������������� �� !�>
kriging�������� �� ���� �������� ��!�����1����������� �� ����!��������� ��������������� �F�������� �� ��������� ��� ���!������!�������� ���>�0� � ����� �������������� ���!������
Glossary.p65 05/15/2002, 2:54 PM247
248 USING ARCGIS 3D ANALYST
"���������� "�������� �� ��#������!����������� �>��� ��������1������������ �������1�����������!�������� ���3�������� �� ������ �3���������"���������� ����������!�����!������!�������� ���>
lag����� ��3�"����3��������������������������� ��>����������������3�� ������3������ ���� �3�� ����� �>
line of sight������� ��� ���1����������� ����������#������������������������������" ������������� ��� ��1�������>
natural neighbors��� �������� ��!����������������"������������ !������ ���� ������"�����#����������������� ��� ���������� ���3�����! ����1������� ������� ������ ��#����� ����� ���>
navigate�� ������� "����������������������� "��" ���#���������1�!" �������!��>
nodata-!���������3���� �������� ��3���"���!����������� �� �����������#��� ��������������������>�����������������#������� ���������1 ������"���F#����:....3��������>�9�������� ����!�����������������������������1���!��������������� �����>�@��������������� ������#�������������#����������1������ ����������������������-�!1������1�#�����=�����2����� ���� ����1�>-�������1��,����>
node������ �������*+���#����������� �������� ��#������!�������>�+���������*+���#������������"�� ��A&B�"���������!����"������"����>�2 ���#�������������������������*+�1��!������ �������*+>
nugget������!�����#����"�� ���������! "�� ���!�!������������������� ���������������3�!�����!��������3����S�! ��������"�� �� ��������� ���������������������# �����������>�����������##���� ������������� ���� � ����������� � ��#�� ���������"�� ���������! "�� ���!�!���>
observer������ � ��#�������!���� ���������>
observer offset������ ����#�����1���"���� ����1"������#������������������� ���� ����#�� ��������" �������>
offset�������������&:"����#������#������#������� ����������1������������!�����1��� ������������� �>�;##�����!���1����� �����!�,��#������������G����1"������#���>
orthographic view����������" ������������ �����������������������������#�!�1"�>������� ������������ "��#�������� ��� ���������� �" ��3��������� ����������������������� ���� �����>
path��� ������ ���#������������� ������3������ !������������ !�� ������,3������! ��������!"�!����#�����!�����������>
perspective view����������" ������������ ���������� �����#�!����������� "������������������1����" ��� ���������������#�!������� # ���� � �>
Glossary.p65 05/15/2002, 2:54 PM248
GLOSSARY 249
profile graph��������#������� ����#�����#��������������� # ���� ��>
range������!�����#���"�� ���!�����! "�� ���!�!���������������������� �������1������� ��������� ��� ����������������� ���!���"�� �1���>
raster9������������������������������������� ����������������������� �� �#�!�� �>�-����� ������ !���>
raster resolution����� &��#����������� ����������>�;����#����������������������'�������������� &������1��� �������� ����������>
scene����!��������#�� ������� "��� ����������'����#�������� ������ ����>
semivariogram����"�� ���!�� " ����1����>
sill������!�����#���"�� ���!�����! "�� ���!�!���������������������"�������������"�� ���!��������������� �����������"���������>����������� �������3�"�� �1����1��!������������3������� ���#�������! "�� ���!� ���'���������"�� �����#��������!�"�� �1��>
slope-���� ������ ��� ��3������������3�#�����#���>����������#����*+#���� ������������������� ��������#�����������# ����1������#���>������������������� ����������� ������������������� ��������#����������# ����1��������������� ���� ��������� ����� ��1��>
-��������1��!������� ����������#�!��� &�����A$L.$B��������������3��� ��� ������� ���� " ����1��������3�� !����$$>�������#�(�����������'�����$$�������������>������������������������"��� ����A.$��������B3��������������������������� �# � ��>
spline��� �������� ��!����� ���� ��������"������������ !������ ����!����!�� ����#��� �������! � ! &���"��������#������"����3����� ��� �����!�����#��������������������������������� ����� ���>
steepest path��� ��������#���������������������� ���� ���� ��������#���>2��������! ��������������#������� !������� ����#��������" � ����� ��>
stretch���� ���������������� ������������" ������������ ��1� �������1������� ��������>
surface������#���� �������3�����������"�� ����� ����!�������3"�����������������1������1����������� �� ����!���� �������������>
target������������ ��� ���������<��" �������� ���������!���� ��� !��>
target offset������ ����#����������� ����1"������#������������������� ���� ����#�� ��������" �������>
Glossary.p65 05/15/2002, 2:54 PM249
250 USING ARCGIS 3D ANALYST
TIN�� ��������� �������������,>������������������������������������ �����#��������������� ���#� ������������������ ���� ���"��������������� 1��������#������������� ��F#�����!���3������"�� �>�8�!�������� ���3��������,�#�� �,����� ������#�!��������#���>
track���������������� ��#�� ,��,��#��!�������3�������������������� !�� �3������������! ������� � ��1����������!>
triangle�� �������#�!�����#����������*+���#���>�������� �����������*+��#���� ����# ����1��������������������������������� ����G������������������������ ���������������#���>��*+��� �����������1���������� "������������������ �#�!�� ������!���1����� 1����� �������"����>
variogram��#��� ��#������ ������������ ���� ��������� ���������� ������� ��������'��� #����������� �>�����"�� ���!� ����# ����������"�� �����#������ ##�������1����������"�� �1������������� ��>�����"�� ���!����������� ���������� ���� ����������� ������ 1���1�������3�� ��3���������������!�����>
variography�����������#���� !�� ������������� ����"�� ���!>�*��1�� ��� ������������������������ �3�������!�� ��������!� � ���"�� ���!3�1 �� ��3�# �� �����"�� ���!�!���3������ ��� ����� ����������������# �����!���>
vertical exaggeration�����!���1���� �������&:"����� ����������������!�� �� ��� �������������������� ��� ������������#�������#���>�-������!���������#�������������������#���������"����� ��!��������������
����&:"����F���� ���"��� ������������� �������!��������#��� ��1�� ������ ������ �#>
viewer������ � ����� �������������������" ��������������� ���������#�!�������������>�@�������"��!�� ����" ������ ��������>
viewshed����" ������� ���� # �������������������#�������������1������#�!������!���1���"�� ��� ������� ���>��� �� ����#��#����� ��� ��� ���� �������" � 1 � ���#����1G���� �� !������3�������# �� �������:��������������#���!!� ��� ���������� ������������#������# �����������#�� � � ��>
volume���������F!������� ���1 ��� ��F1�����������#������������������������ # ������"�� �>�%�!��!���1�������������1"���1�������������>
Z factor�����!1���#�������3��� ��� �������#����&�� �>����� �����#����"���������!�� �� ���1���������� # ���R�#���������G�����������������&�� ������������� ��#�!�����>
z-value��"����������������������&:�� �� ���������:� !��� �����3�3&��� ����������!>�����"�����#�������� �������! ������������ ����#��������1���������&:"���������������� ��������#���� ����>�+!�� ������ 1����#�#������3�#�����!���3�����!1���#�#���� ����1 �� ��3���������1���������&:"����>
Glossary.p65 05/15/2002, 2:54 PM250
251
12Index Symbols
����������� ������������ �
�� ����������� � ������������� ��� � !
��������� ����
������ �� ������ �"#
$������%�� �!�������� & '
�����������������(��� �!#
������� ����������� � !������� �
��������� ��� �!" ������ �� ) �"# ������$������%���*�������� � �!&������� & '������������ � ��� �!"�������� � ��� �!&
��������������������� �'+
����������� ��������� ��� �!"
������������ ��������� ��� �!"
������������������������� �!��������������
��������� ��� �!"�� ����������
�������� ##��,��(���*��(
��������������� �-����� .����� �-�
��,��(����$������ .����� �-�
��*��(������������/���0�������$ �-#1����������$ �-#2���������$ �-#
A
������������ ����� ��� �!"������$���
��������$��������� �&&�*��(������ ��� �#!���������� .����� �! ���������� ��� �!'�������� � ��� �! �������&� �'"�����������3�4 #�) #"���� ��������������3�4 #"
������ 3��������� � �������� ��� ��'
��*�� ��������������5���� +"
��������������� & '��� ��$�� &������ ��������������� &�-������������ �' ���������� ��������������� &��
�����������5��������� +#��� ��$�� +#
�������� ���������� ������� ���������*� ++
�����%������� �� ��!*���$����� �'-
���������������� &- ) &-"������� &-!
��������� & '��������������� & '�� .�����$��� � �--��������$���������� ������������� ##�������� ������� ������������ � ������� ���
Index.p65 05/15/2002, 3:02 PM251
252 USING ARCGIS 3D ANALYST
�� ���������������� �!'��������������� �!' ������������ ����� �!"�������������� �� ��'��������$���������� �
�� � �����*��(������� ����� �������� & '�������������� �� ��'������� ���� �� �������������� ��� �!"�������������$������������ �!'
����������� & '
���� � �� ������ � ������� & "����*������������ � � '��� ��$�� � -���(��3�4�� ��$� �&"6������������������������� � � -������ �� ������� � -���������3�4 ��'3�4 �� ������� � -
�����$��� ��$�������������������� �!#
�����$����������� & "���������� �!!���� �����������$� &�#������$������������� ��-) �!!������%7*��������������� �!!
���� ����������������� & "
�%������������ & "��� ��$�� &�-���� ��������������� &�-������������ �'
B
/� 5������������ & "������ ��������������� �&-*�������������� �&
/� 5�����8������9�������� ��'
/� 5����� ���� ��������� ��� &-+���� ��� �! ) &- ���������������� &-#
/��� ����� �������������$��������� �&&
/�����������:������������� !
��� ��$�� +�/��������������� & "����������������� �!+���������� ���� ��� �!'������������� �+'���������������� ��"���������������������� �!+�������������������� �+"���������������� � �+����������������� � ��������������������$��� ��-) �!#
/��������������������� �+'
/��������� & "
/���5��������� #������������������3�4 #����� #������ #�
/��(����������� .����� �--
/�������3�4 #'
C
.�� �����$�������� �!#������������������� �+&� ���*���� ������������ &-'
.�� ���������1������ ���*���� ������������ &-'
.�� ������*�����������$�������� �+#
.�� ���������� � �
.����� �-') & "
.������������� ��*�*��(����� ��� &&#
.�������*��(�����5������������ &&#
.������ ��������������� & "��� ����� ��#
.�����%������������������� #&��$�������� � �+"
.������� �-'����� �� �-'
.�����$��� ����� �&& ������
���� ������������� �"&����������������������6�� 5�� &�-���������������6��*�����
���� ������������� �" ���$� 5����� ���� &-+���$��� �������������� �&���� ������� ����������������� �" ��������� ��*����� ���������� &�!����������� � ��"���������������� &-!���� ��������� &������ ��������������� &�-�����������3�4����� � �&+���*���� ������������ &-'
.����������������� ��'
Index.p65 05/15/2002, 3:02 PM252
INDEX 253
.����������������� &&#
.��� ������� ������3�4�(��� #
.������*��(�� �#!) �#+
.����$� 5�������� ��� &- ���������$� 5����� �& ��������������� �&
.����2������������ �&-��������������� ��+
.����� ������������������� ��#
.��������������������������� � �#-
.���������������� �'
.��������������$�������� �+#������������������� ��&
.������� ��$��� ��$�� �--
.���������������������� & "��� ����� ��+���(������� �������� ��+
.������ ������������� � � ! ������������ ������ � !������� & "��� ��$�� � �) � "�������� ��� � "
.�������������������� ��� �!"���������������� ��(��� � -
.������ ���� ������������ ������ � �
.���������� ��$�� &�&���� ��������������� &�-����� ���������� �&-
.���������(������������������� �#-
.��*������������������������� �"!������������3�4���� #!������������*� ������� �""3�4�������������� �"+3�4���������������� #+3�4������*� ������� �""��������%7*����� �++%��������)������ �++%7*����� �++
.��������� ������������������������ #-���� ��� &�'���������� &�"
.����������������� ������������� &�
.���������� ���� ��� �!"� ����� ���$���� &&�
.���������� ������� ��� �!"
.��������������������� ������� ��� �!"
.���������������� �"#
$������%���*�������� � �!�������� � �"#
$������%���*�������� � �!&�������$���� �-+���������������� �''�5������� &��
�� ��������������� &�&�� ��������������� &����� ������������� &��
������ �-#����������� �'&���(� ��� �! ������ ������ � #����������� &&") &&+3�4�
��� ��$�� #�
.����� ��*���������%7*����� �++
D
������������������������� � ��� �!'
��������������� .����� �! ����������� ��� �!'��������� � ��� �! ����������������� � �#-
��������� ������������������������ ++
�������$� 5����� ���������� &-#
������� ������$�����������$��������� �&�
������������������������������������ �+"���%7*�������������� �!+
����������� �������� � ����������� � &������
������������ � � ����*��
������������������ � �''�*��(���� �'����� � � ' ����������� � � ������� � +����������������������� � �"#������������������������$��� �!-����� � �
�����%�� ���������������� �!�
��� ���������������� �+'
���������&��������� �-#
Index.p65 05/15/2002, 3:02 PM253
254 USING ARCGIS 3D ANALYST
���������8 ��������9��� 3���
����������� ��#�������� �� ��+
3�4����(�������������$�� �� 3�4�����
$���*���� ��&(������������$�� ��&
3�4�����$�3�*���� ��&������������ & !
������&����������*�������� � �!+��������������� � ��"��������
��� ��� �!!���(��3�4����������(������6��
���$�� �� 3�4�� ��$����� � �&"3�4�� ��$����*����� �&'3�4�� ��$������ �&+3�4�� ��$���*���� ��-3�4�����$����*����� ��&
���(����������������� & !
E
1��������� & !���(��(������6��*����� �� ���������3�4 ��'3�4 �������� !�
1��������������� ���� �� 1��� ������$������ ��� ��'
1��*��������������3�4�� �� �&'
1����� ������*��������������������� !!
1����������� ������ ������ ��
1���� ��������� ������ ��
1���� ����������� ��������� �#-
1���������� ������3�4�(��� #
1����������$����������������� �!+1��������������*������������ !!
1������������� ���� ��� &&��,2�;����� &&&��������������*�������� & �
1����� ���������� ��� &�������������������� #���� ��� &- ����������� ��� &������������ ���������� &�
1����������������������� �+&��� ���� �!!����� ������� ��&�����������$��� ��&���������������� ��&
1��������������������������(��� �+�������� & !��� ��$�� ��&����������
�� ������ ��&) �+&������ ��&
���������� ���� ��� �!'
F
<� �������� & !
<���������� ������������� �!!
<������ ������������� ��� �! �������������� ��
<������������� ��$�� �!!�������� ��� �!!
<��������������� �!!<�����������
�����������$��� �!-<�����������
������������ �!+<�������
�����$���� �� �!!����*������������� �""����*������3�4� �""������������� �!!�� 5��%7*����� �!!���� ���$������$���� &�#���� ���$��� ����� &&-���� ������� ��� &�!����� �!!
<��������������� ���������������� &�"
<���������� ������3�4�(��� #
<����������� �������������������� ��� &�'
<�������������������� �'#<�����������
������ ������*������� !!<�������� �2����� !#<�������� �
&���������������������������� �!+������������������(��� �+"����������������� �!+
<��������� �-
Index.p65 05/15/2002, 3:02 PM254
INDEX 255
G
��������*��(���� .����� �-�
������������������ �!!
��������� ������������� � ��� �!'
������������$����������� � ��� �!'
������ ���������� ��� &&�
����������� & !
������������������ ������������� �"�
H
0���$���5�������� ��$�� #�
0���������������������� �+#
0����*��(�� �#+
0��������������������&����� �'" ������ �'' ������������� � �������� & !��� ��$�� � -) �' �������� � ������ �� � -
0�������(�������� ��������� �&-
0������� ��$�� # ��3�4 ������� #
I
�������� ��+����������
�������� ��+����� �� ��+
��:8��*���������� �:������9������� & !��� ��$�� !�������� !
���������������� ��� �! ) &�-����������������� &������������%����� &�-������������ ��� � �
������������ ������������� &�&
������������������������� ��� &-
����������� & !�������*�������� � �+'������ �+'������$������������������ � �!!
����� ��������$�������3�4 #�
�������������� ������������� �"
������������������ & !���� �!�) �!&����� �!�) �!&������ �!�) �!&
������������������:
����������� +&*����$�������� +�
4������4���$��� +!������
�������%�� + ������� +�
����������������������� �� !& ����������� ������� "#��� ��$�� !&=���� +'
���������������������*����$��
��� ��$�� !��*����$������������� "#
��*���������� �:������8��:9������� & !��� ��$�� !�������� !
K
=������� & !=����
��*�� ������������ +"������� & !��� ��$�� !�������� !'����������� +"������������� +'������� +->������� +-) +'���*����� +-) +'*����$�������� +'
L
;�������� & +
;���%���5���� +"
;������5�������������������������
��*������ �#-;��� ��� � ��� ���
Index.p65 05/15/2002, 3:02 PM255
256 USING ARCGIS 3D ANALYST
;���������� ���������$�������� �+#����������� ��� �!'��������� � ��� �! ���������� .����� ##��������������������� �+"�������%7*����� �!+��������$����������� �!+������������������ �+&�������������������*������ �#�������������(���������� �#-������ ��"���$������ �!'
;�������������������������� �!!
;������������������ ��� �!"��� ���������� �'- ���������� ��� �'&������� & +��� ��$�� �'-������������ ��� �'-
;��������� � ���������������� & &�������$������� ������� �"&
;� ��������� �����������$� &&-
;��5�� ����������*������������ ��-
M
�����������=���� +"
��5��� ��������$���������� &�'�������������� &� ����������������� ��'������ ���� !+������������������� &�'�������������� &�
������������(����� .����� ##� ���*��(��� �#!*��(��� �#+
��� ������� � "��� 3����������������������� ��#����������������� �� ��+
���5������������������ +#
���� �����������������������3�4 #�
�������� ��$��� ��$�� �--
�������.�������������������:
��� ��$�� +&������������(� �''��*����������������� &�"�����$��� ������������$��� �&&��2�/ �������� ��'$��� ������������� �&�������$������� �&&
���������� ���$����������������� � ��� �!'
�������� ��������� ���������������� �!+
��������*��(��(����(� �#"
N
4������4���$���������� & +��� ��$�� !��������������
��� ��$�� +!4�*����������� & +
4�*��������� �-�
4�*����������������������������� �#�������������������(���������� �#-������������������������ �#-
4�������������������5� +#������� & +���� ��������� �"'�� ������������� �"��������� ��'������ ������������ �&-��5��(�*�������������� �&
4���������� & +���(��3�4��������*����� ��&���������3�4 ��'3�4 �������� !�
4���������� & +��=���� +"����*������� !+
4��$���� ��������$�������� � �+"
4��$������������� ��$�� + ��������������������� ! ��������������� +�
4��$������(���$�������� � �+"
O
>$���*�� �-'������� & +
>$���*��������������� & +��� ��$�� �'&
>������������ & +������*�� ������� � +
Index.p65 05/15/2002, 3:02 PM256
INDEX 257
>������������������������� �+#>��������������� �������
�� .����� ���>�������=���� +->��������� *��(
������� & +>����� �����%�
������������������ #&>����� ������
������������������ #�>*�������������� �����%� #&
P
�����(����������������� &-!
��������������������� &-!
������������=���� +"
�������������=���� +"
�����;���������� � ��� �!'
������������� ���� � ��� �!"����� ������� ��� �!"
���� & +��� �������� � &��������� �
���������$�������� � �+"��������� ������ �����
�������� �#-������ ��*�*��(
������� & +������$� 5����������� &�-�������������
��������������� �!!�����? �-�) �!�) �!!) �!#
�������� ���������������� �!+
����������������������������� �!!
������������������������3�4 #�
������? �-�) �!�) �!#�������� ���������������� �!+
��������? �-�) �!�) �!#�������� ���������������� �!+
��(������:������������� !
��� ��$�� +�����������
%7���� ��*������ �++���*��(��$
��� ��$�� �--*��(������������ .����� ##
���*��(���������� .����� �--
����������������������(� �����3�� ��#
��������� ��� &&��2@����8����� ��������9 &�"�������
����� �'+�����������
������� & #���������������������� �'+����� ��������8�2@9 &�"����������
��� �������������*��(��� &- �������������������������� �!+����������� ��� &-
R
2����� ��������:������������� !
2���������� & #����*������� !+
2����� ������ �� ��# �����%� !- ��������� ��+ ��*�������3�4 #!��������� �+'������� & #����*�� ������� � ���� ��$�� !-�������*�������� � ��"���(������ �������� ��+��������� �''���� !-�������������������-����� �!+�����
��������������������� �+"������$�������� �+"
�� ���������� ����� !-������$������������ ��"���$���� ��'��$ �&�������� !-��5��(�*����� �& (�������������� ��!
2��������������� �+"������� �##) & #
2� ����������������4����� �"���� ��$�� �"�
2� ��������������$� 5������������ 5� &�-
2� �������*�������� ���������������� &�-
2��7�����7/���82�/9 �������� �&�
2������%��������
��� ��$�� + ������������������������� !'
Index.p65 05/15/2002, 3:02 PM257
258 USING ARCGIS 3D ANALYST
2�������������
�����������*������ �#�����(�����*��������������� �#-
���������(��������������(� �#-���������� ���� ��� �!'��������� ������ ����� �#-��$ ��") �#-) �#�
2���� �������� ������3�4�(��� #
2���� ��4�����*����� �"&*�����$��������(����������� �"&
2�������$�������� ���������������� �+"
2�����������$�������� � �+"
2�������*��(�� �#+
2�/82��7�����7/���9 �������� �&�
2�/ ����������������������$���������� ��'
2��������������� &- ) &-"�����
����� &-!��� ��� &-"
������� &-!2����� ����������� �������� ���� �'#
S
��*������������� &&") & -
$������������ 5������� � ��� & -���� ����� ����� & -
�������$������� ������� �"&���������������� ����� ++
� ��������������� ������ �! $� 5����� ���� �! �����$� 5����� ���� &-+ ����������������� &�' ��� �� ���$���� &&� ������ �! �������$� 5����� ���� &-#) &�-) &��)
&�&) &��) &� ) &�"������� & #���������������� &&���������,2�; &&&������ &-
����� &�������������� �!
����� &�-���������������������� &- ������*��(��� �#!������������ .����� ���������� &&�����������
����������*��(��� &- ���� ������������� &�!������������������ &- *���� ������������ �! *��(���
������ �#!���� �2����� !#����� !#*����$�� !#
���� ������������������� .����� �-&
���� �����������
$� ����� �����$���� &�#$�������� ����� &&-���� ��� &�!������ ��*��� &�!) &�+
�������� ���������%7*����� �!&���� ���������� ����� &�!
����*������� !"������� & #���� !+����������� !+
����*������������������ �� !!
������������A�$������������������� � �+��������A�$������������������� � �+"�������������5 +#$������������������� � ���$��������������������$��� ��-����� ���������� �-#���$� 5����� ���� �& ) &-+���$�������������������$��� �!#��� ��������������������������
������� #-����������$� 5����� ���� &-#���������� ����$������������� �&������������������ &��������������� ���������� &� ����������������������� &������������������%����� &�-��������������� ������� &�&���4����� ���� �& ��������� �����%� #&��������������� #������������������ ��� &- ������������� #�*�������4����� �"'
������ ��"������ ��"������������ ����� ��� �'!�������(������������� �'"��������� ��� �'!�������� �+'����� �� ��'3�4�� �� ��"
��������������� �!!
Index.p65 05/15/2002, 3:02 PM258
INDEX 259
��������� �������������� ��
���������������� &&!) & &���(
�*��(�� �#+����
������� & #����*������� !+
��������������������������*������ �#-
���������$����������� � ��� �!'
����� �� ������ � &������� & #��� ��$�� � -�������������� ����� � &����������������� � &6������������������������� � � -������ �� ������� � -���������3�4 ��'3�4 �� ������� � -
���������������� #�
�������� ��� �� ���$���� &&�
����$���5�������� ��$�� #�
����������� ������������� ����� !"
��� ������?�� ��������������� �''
����� ��������� ����������� &-!
������ ������*������������ !!
������������� & #��� ��$�� !�������� !
����������������������� &-!
�������� ������������� ��� �!" �� 5��3�4�������� �'#������� & #������ �'#
����� �������� & #��� ��$�� �&-���������� ��'���� �&-
���� ���������������=���� !"
����� ������%�� ��!���� �������� & #��� ��$�� !-��������� ��'�����
������ "#��� ��$�� !-������ "#������$������������������� �!!3�4 "#
�������������$������������� �+����������$��������� ���
����� �7��7*� ������������������� ������� ���� �"�
���$���%��3�4�������� �&'
���$������������ �+'�������������� � ��� �!'
T
3�$��*��(���� .����� �-�
3�*������� ��$�� ��-���������3�4�� �� ��-
3�5��������������� ��� &&�3���� �-'
������� & #3����������
������� & #��� ��$�� �'&
3�������� ����������������� ++
3������������������������������� !'
3��������������� ��$�� +�
3�� �����)����$���*��)����������� �-') &&"
3������ ������ �+'�������*�������� � �+'���(��(������6��*����� ��#
3���$���� ������������$����� ##
3���������������������������������� &�#
3�48����������������������(��59������������� #�) #"��������� ������������� #"�������� ���������������� �!+ ����������� !� ������ #�������� &'-����*�� ������� � ���� ��$�� !-������������*����� ��'����
���(��(������6�����$��� �� �� ������� ��"�� ��
���������$������ �&+������������*����� �&'���(��$����� � �&"���(��$���*���� ��-
�������� �� 5��(��������������� �'#
Index.p65 05/15/2002, 3:02 PM259
260 USING ARCGIS 3D ANALYST
3�48����������������������(��598 ��������9�����
���(��$����*����� ��&���������� !����$���� ��'
3�� 5 &'-3��������� ������������������� �'"
3������������5�������� ��'����� �� ��'
3������� ��$�� !�
3������������� &'-3�4 �������� !�
3���������������������(��583�49������������� #�) #"��������� ������������� #"�������� ���������������� �!+ ����������� !� ������ #�������� &'-����*�� ������� � ���� ��$�� !-������������*����� ��'����
���(��(������6�����$��� �� �� ������� ��"�� ��
���������$������ �&+������������*����� �&'���(��$����� � �&"���(��$���*���� ��-
�������� �� 5��(��������������� �'#
��������(��$����*����� ��&
���������� !����$���� ��'
3����������� ����������� ������� "#
3�����$������������ �&&3�����������������������$�� &&+
U
������������������� ������������� �"�
���6��*��������(��������� ������� ��#���������� ��'
����� ��*��������%7*����� �++
���*�����=���� +-���*�����3����*������� ���� 8�3�9 �++��5��(�*��������$���%����������� �&
����������� ����� � ��� �!&���������������� &-"$����7��%7*������������� �!# ����������� ��� � "����������
��� ������� �' ���������� �'
������������������ &�!��������������������� ���5�������
��� &�!��������������������� ������ 5
���������� &�+�������������������������������
���������� &�#�3�8���*�����3����*������� ����9 �++
V
,����$������������:�������������
��� ��$�� +�,����$������ ������� !#,�������������� &'-
,��������� !"������� &'-
,���� ��� ��� � ��*�������������3�4 #!
,���� ������������ &- ��������������������� ��� &-' ����� &-'������� &'-���� ��� �!
,��(������� �#! ���� �#+ ����� �#!������� &'-���� �#+������ �#+������� �#+���( �#+
,��(�������� �#+,��(��(����(�
�������� �#",��(��
�� ��������������������� �#"������ �
�������������������� � -����������� �+"����$����� �-+
,��(����������� &'-����*�� �'���� ��$�� �'-����� ������� ����� �'�
,���$����������%�� �'-
,������%�������������� �!!������������� �+'
,����� �������� &'-
,2�;���������� &&&
Index.p65 05/15/2002, 3:02 PM260
INDEX 261
W
:�������2������%��������
��� ��$�� + ��������������� +�
Z
?�� ��� ��*�����3�4�������� #+������� &'-�� �� ����������� � �������*�� ������� � +������������ �''
?7���� ��*�������� ����������� �+'��3�4 �&+
?7����� ��*������
���������� �++.��*��������)������ �++
?7*���� ��*������������ �++ ����� ��*������ �++������� &'-���������������� �!+������������������ �!+���������������� �!+) �+"��� ��$�� !-����������
��������� � �!���������� �+#�����������������$��� �!#�������������$���� �!!��������������� �!!���������������������� �!#
?���������� �� �-") �-!�������� �-"
Index.p65 05/15/2002, 3:02 PM261
Index.p65 05/15/2002, 3:02 PM262
top related