using an arc wireless client with a ruckus basestation

Using an ARC Wireless client with a Ruckus BaseStation

Ruckus makes a World Class BaseStation…..

….and ARC Wireless makes a World Class client radio….

By combining the two, you achieve the ultimate Flexibility in wireless networking!

The OSI Data Layers

Standard 802.11n clients cannot do true Layer2 bridging

Layer 2 is MAC Address based

• This limits the type of traffic you can pass through your network and can interfere with hotspot operation.ARCFlex™ 802.11n have true

Layer 2 bridging support with Ruckus basestations using WDS• This allows for full control of

your network, and true layer 2 bridging

Enabling the Ruckus Compatibility Mode1. Select the Wireless WAN interface tab

(WWAN)2. Change mode to Client WDS3. Select Use Ruckus Compatibility Mode

1.

2.

3.

That’s it! It’s that simple!

Example Network with Ruckus and ARC

Share Wifi with built in HotSpot

Connect via cable or Wifi

True Layer 2 ClientsZoneFlex Meshfor links shorter than .5km

FreeStation for links longer than .5km