unified-pcmc ver4 (kx-ncp500/1000/tde600). installation

Unified-PCMCVer4

(KX-NCP500/1000/TDE600)

Installation

UPCMCv4.xxx

Download the latest UPCMC from the PCC Website.

Double-Click the icon and install the tool to your PC.

NB: You will need ‘Administrator’ rights to successfully install the U-PCMC.

“U-PCMC (V4.x) Installation - 1

Select the ‘Repair’ option (Pre-selected) and click ‘Next’.

“U-PCMC (V4.x) Installation - 2

Click next to continue

If you are upgrading the U-PCMC, then you will have the option to backup your connection profile information,

NB: For a ‘new’ installation, this option will not be presented.

“U-PCMC (V4.x) Installation - 3

Click next to continue

Then, accept the license agreement and Click ‘Next’.

“U-PCMC (V4.x) Installation - 4

Click next to continue

“U-PCMC (V4.x) Installation - 5

We can see PBX models.

Click next to continue

“U-PCMC (V4.x) Installation - 6

User and Company name can be entered.

Click next to continue

Be sure to select the correct country suffix code for your region.

Then select the required PCMC screen language.

“U-PCMC (V4.x) Installation - 7

Click next to continue

“U-PCMC (V4.x) Installation - 8

Select the destination folder for the installation.

Click next to continue

“U-PCMC (V4.x) Installation - 9

A summary of the provided details will be displayed for confirmation.

If the details are correct, the installation can begin

After the installation has completed (it takes several minutes), the option to copy the USB drivers is

presented.

If necessary, copy the files to the following directory :-

C:\WINDOWS\system32\drivers

“U-PCMC (V4.x) Installation - 10

Start U-PCMC

Be sure to check the contents of the ‘Information’ page. It contains details of required LPR s/w levels and conversion information.

“U-PCMC (V4.x) Start - 1

Once installed, click the UPCMC Shortcut to launch the application

Click “OK” to continue

Then enter the password for the desired level (INSTALLER/USER etc)

“U-PCMC (V4.x) Start - 2

Click “OK” to continue

The same options as earlier U-PCMC are presented.

“U-PCMC (V4.x) Start - 3

“U-PCMC (V4.x) Start - 4

New (Batch Mode)

New Model- TDE600- NCP500- NCP100

“U-PCMC (V4.x) Start - 5

TDE600 Slot Menu

“U-PCMC (V4.x) Start - 6

NCP500 Slot Menu

“U-PCMC (V4.x) Start - 7

NCP1000 Slot Menu

“U-PCMC (V4.x) Start - 8

Slot view is changed to represent NCP Model (NCP1000).

“U-PCMC (V4.x) Start - 9

The same operation as earlier U-PCMC are presented.

“U-PCMC (V4.x) Start - 10

PBX Replacement.

Sorry – PBX Replacement for NCP500/1000 is not possible.

Improvements/New Menus- Auto-Programming for Call-Pickup- IP-PT registration procedure- Portable Station registration procedure- Activate License- ‘Search’ Function to Extension List View.- Built-in Communication Assistant- Activation Key Detail Information- FAX Transfer function

“Auto-Programming for Call-Pickup -1

ISDN Ext.1001

Ext.1002

1- Ext.1001 has a call (Internal/eternal)2- Ext.1002 pricks up the call by *0.

1

2

But, customer wish to have……

Customer Request Operation

1- Ext.1001 has a call (Internal/eternal)2- Ext.1002 pricks up the call by *40 + xx.

Alternative Plan

1- Quick Dial *0 → ***002- Ext.1002 personal speed dial 00 → *40 + xx.

U-PCMC ver.4 automatic program .

“Call-Pickup tool” is added.

After assigning extensions to their correct groups, this tool can be used to make easy call pickup for each user.

“Auto-Programming for Call-Pickup -2

Click “YES” to continue

Available PBX-TDE600-NCP500-NCP1000

“Auto-Programming for Call-Pickup -3

Ext.1003Pick-up group-02

Finally………

Ext.1001Pick-up group-01

personal speed dial 00 → *4002.

personal speed dial 00 → *4001.

Ext.1002Pick-up group-01

personal speed dial 00 → *4001.

Quick Dial *0 → ***00 Automatically programmed

-Open Registration Screen-Select IP Extension numbers-Click Next

-Click Next Screen shows Registration Succeed! -Click Continue

-Click Next

Need to click Next/Continue for each IP-PT registration

“IP-PT registration procedure -1

-Connect IP-PT to LAN and wait for automatic registration (about 15 seconds)

-Connect IP-PT to LAN and wait for automatic registration (about 15 seconds)

Screen shows Registration Succeed! -Click Continue

Current

-Open Registration Screen-Select IP Extension numbers-Click Next

-Connect IP-PT to LAN and wait for automatic registration (about 15 seconds)

-Click Automatic response

Screen shows Registration Succeed! for 5 seconds

Screen shows Registration Succeed! for 5 seconds

-Connect IP-PT to LAN and wait for automatic registration (about 15 seconds)

ImprovedNo operation required for each IP-PT registration

“IP-PT registration procedure -2

Screen shows Ready for next registration

New Icon

Available PBX-TDE600-NCP500-NCP1000

-Open Registration Screen-Select PS Extension numbers-Click Next

-Connect PS to System and wait for automatic registration.

-Click Automatic response

Screen shows Registration Succeed! for 5 seconds

Screen shows Registration Succeed! for 5 seconds

ImprovedNo operation required for each PS registration

“Portable Station (PS) registration procedure

Screen shows Ready for next registration

New Icon

Available PBX-TDE600-NCP500-NCP1000

-Connect PS to System and wait for automatic registration.

CA License status can be viewed via the Activation Key Page.

Automatic OUS/INS can be made after adding additional licenses. (Activate License)

“Activate License Available PBX-NCP500-NCP1000

“‘Search’ Function to Extension List View.Available PBX-TDE600-NCP500-NCP1000

It is possible to search by Ext number or Type or name.

It is easy to find Shelf, Slot, Prot.

“‘Sort’ Function to Extension List View.

We can sort by Extension number, Type, Extension name, Shelf, Slot, and port.

Available PBX-TDE600-NCP500-NCP1000

E.G Sort by Extension number.

4.1 - Option 9 (Extension Settings) – Built-in Communication Assistant

It is possible to specify the type of CA License each extension can use. (Enable = Pro/Supervisor)

NB: This tab also appears in the PS Settings Options, but is not supported till v2.x

“Built-in Communication Assistant

Available PBX-NCP500-NCP1000

“Activation Key Detail Information -1

- Key Type ?- Temporally ? - Unlimited ?

Customer Request want to see activation key details.

“Activation Key Detail Information -2Available PBX-NCP500-NCP1000

1- Highlight Activation key

2- Click “Detail”

Activation key type

No. of Activation Key

Activation key No.

Expiration Day

This function is same as TDA15/30 FAX Transfer Function

“FAX Transfer function 5.3.2 - DISA Message – FAX Transfer function is added

Available PBX-NCP500-NCP1000

“RBT to outside caller via V-SIP

“RBT to outside caller” added to SHELF Property.

Available PBX-NCP500-NCP1000

Modifications/Changes

SLT Ring Default setting is changed from ‘Disable’ to ‘Enable’ (Based on TDE100/200)

1st Party CDR Interval Timer is not shown.(The System refers to 3rd Party CTI.)

2.9 System Settings – Option 6(CTI)

“Modifications/Changes -1

Available PBX-TDE600-NCP500-NCP1000

V-IP Gateway DTMF Default setting

Incoming Caller DTMF Default setting is “Outband (H.245)” – TDE Default setting is “Inband”

“Modifications/Changes -2Available PBX-All TDE-NCP500-NCP1000

Thank You Very MuchFor Your Attention

“ We are Panasonic Family”