types of metal
Post on 06-Jan-2016
26 Views
Preview:
DESCRIPTION
TRANSCRIPT
Types of Metal
Round Tubing•Purchase 20 – 24’ lengths.
•Various wall thickness; 1/8”, ¼, etc.
•Measure OD and ID diameter.
•Comes in various sizes; ¼”, 1”, 4” , etc.
Square Tubing• Purchase 20 – 24’
lengths.
• Various wall thickness; 1/8”, ¼, etc.
• Measure OD and ID diameter.
• Comes in various sizes; ¼”, 1”, 4” , etc.
Rectangular Tubing• Width is longer than
height
• Purchase 20 – 24’ lengths.
• Various wall thickness; 1/8”, ¼, etc.
• Measure OD and ID diameter.
• Comes in various sizes; ¼”, 1”, 4” , etc.
Hot Rolled Round• Purchase 20’
lengths.
• Various thickness; 1/8”, ¼, ¾”, 1”, etc.
Expanded Metal• Purchase 4’ x 8’, 4’
10’
• Various thickness; measured in #’s.
• Comes in flat or rigged
• Comes in various sizes; ¼”, ¾”, etc.
Rebar• Purchase 20’, 24’ ,
30, etc. lengths.
• Various thickness; measured in gauges.
• Measure OD.
Diamond Plate• Purchase 4’ x 8’, 4’
10’
• Various thickness; measured in #’s.
• Comes in flat
• Comes in various sizes; ¼”, ¾”, etc.
Sheet Metal
• Purchase 4’ x 8’, 4’ 10’
• Various thickness; measured in gauges.
• Comes in hot or cold
Hot Rolled Square• Purchase 20 – 24’
lengths.
• Various thickness; 1/8”, ¼, 1”, etc.
• Measure OD
Flat strap or Flat bar• Purchase 20 – 24’
lengths.
Width is longer than height.
• Various wall thickness; 1/8”, ¼, etc.
• Measure OD
• Comes in various sizes; ¼”, 1”, 4” , etc.
I-Beam
• Purchase 20 – 24’ lengths.
• Wall thickness is calibrated for size of I-beam.
• Comes in various sizes; 3”, 6”, etc.
Angle Iron• Purchase 20 – 24’
lengths.
• Various wall thickness; 1/8”, ¼, etc.
• Measure OD and ID diameter.
• Comes in various sizes; 1” x 3”, ½” x 3”, etc.
C-Channel
• Purchase 20 – 24’ lengths.
• Wall thickness is calibrated for size of c-channel.
• Comes in various sizes; 1”, 6”, 3”, etc.
top related