turbodrain engl
Post on 21-Dec-2015
346 Views
Preview:
DESCRIPTION
TRANSCRIPT
The Original!
BELLMERGegr. 1842
The Original!
Economical and highly effective sludge thickening
Process
Creative technical solutions…
The TURBODRAINTM applies the principle of gravity fi ltration and guarantees highest performance on minimum space. Flocculant is added to the suspension and the fl occulated sludge is evenly distributed over the whole width of the continuously circulating belt. The water drains off through the apertures of the belt while the solids are retained. The patented Bellmer Chicanes create a ploughing action constantly moving the sludge bed and
Bellmer has been the market leader for more than 35 years in the fi eld of mechanical solid liquid separation. The TURBODRAINTM represents a further revolutionary development for the separation of suspensions.
transporting remaining free water close to the belt to drain through the apertures of the belt. The adjustable ramp multiplies the retention time on the belt, thus allowing more water to drain off and increasing the dry solids content of the thickened sludge. The sludge is discharged from the ramp by a scraper. Thickening on the TURBODRAINTM may reduce the volume of all types of suspensions by up to 95%.
Your benefi t!Easy to operateLow maintenance costEasy access Quick cleaning
Continuous operation Minimum operating costsSmall footprintNo TÜV certifi cate required
Belt wash water
Discharge of thickened sludge
Discharge device(option)
Geared drive
Ramp
Feed of fl occulated suspension
Patented feed and maturing chamber
Belt
Chicanes Odour hood(option)
Filtrate
...for Sludge Thickening
The TURBODRAINTM TDC is ideally suited for biological and slow settling sludges at low suspended solid concentration in the suspension, such as:
- waste-activated sludge- mixed primary and activated sludge < 1% DS
The TURBODRAINTM TDH was especially developed to thicken quick settling suspensions and slurries with high suspended solid concentration in the suspension such as:
- digested sludge- primary sludge- mixed primary and activated sludge - mineral slurries- fi bre containing suspensions (paper industry)
For very special applications the TURBODRAINTM TDH-L has become available.
Design
As experts for fi ltration and thickening of many different types of suspensions we offer the TURBODRAINTM for the solution of your sludge thickening problem.
Special attention was given to the design of the feed and maturation chamber and the fi ltrate collection trough to achieve optimum fl ow conditions.
The Bellmer ChicanesThe wedge-shaped chicanes prevent the built-up of a sludge layer hardly permeable for further fi ltrate drainage. Simultaneously the chicanes create conti-nuously open areas on the belt surface to allow more fi ltrate to drain through the belt. The ploughing action of the chicanes also liberates additional free water from the pre-thickened sludge.
The Bellmer rampAt the end of the belt the pre-thickened sludge is dammed up by the adjustable, patented ramp. The ramp increases the retention time of the sludge on the belt - thus enhancing considerably the fi nal dry solid content of the thickened sludge.
Features
Special Features
Additional details and improvementsThe patented maturing chamber integrated the sludge feed system of the TURBODRAIN as well as the adjustable supporting legs demonstrate the efforts we have put into the design of details. An odour hood is available as an option which can be connected to a fume exhaust system. A simple odour hood without exhaust nozzle is also available.
High quality fi ltrate The integrated process technology guarantees a very low concentration of suspended solids of the fi ltrate. The BELLMER RECYCLING SYSTEMTM BRS will improve solids capture and is installed if very high solids capture rates (>98%) are required.The German Association for Water and Environ-ment has published a fi gure of Euro 205.00 being the cost incurred for each ton of solids in fi ltrate to be recycled.
Minimised fl occulant consumptionThe optimally synchronized system of the paten-ted Bellmer mixing unit and the integrated feed and maturation chamber as well as the gentle thicke-ning on the belt ensure a very low consumption of fl occulant.
Too
Added Value - Maximum Performance -
Advantages
Innovative SolutionsFor further optimisation and automation we can offer the well proven BELLMER SYSTEM CONTROLTM BSC. The know-how and experience acquired on 4.500 plants installed worldwide, enable us to offer tailor made solutions for your special requirements. Please contact us.
Minimum Cost
Turn-key solution
The TURBODRAIN COMPACT SYSTEMTM TCS is the turnkey solution for sludge thickening requiring minimum space and guaranteeing lowest operation costs.The TURBODRAIN COMPACT SYSTEMTM TCS will be delivered to site performance tested and complete with all necessary equipment, such as pumps, polyelectrolyte make up and dosing unit and control cabinet.
Installation in a Container... ...or in a Garage
Plug & Play - Installation in less than a day!Plug & Play - Installation in less than a day!
TURBODRAIN COMPACT SYSTEMTM TCS
Test the TURBODRAINTM with one of our mobile rental units
More than a PromiseBellmer Service -
Service
Not the product only is important; the perfect service is part of the product. For this reason Bellmer offers a wide range of services, before and after the sale.
- Process design, dimensioning and layout of plants- Laboratory testing of sludge - Pilot test plants, mobile plants and rental units- Erection/installation- Start-up and commissioning- Training on site of clients` staff by Bellmer personnel- Wear and spare parts- Maintenance contracts
Make use of our wide ranging services! Your plant must operate around the clock, so must the service of your supplier too. Therefore our service team is available for you 24 hours a day , 365 days a year. Our clients have a list of the Bellmer management and service personnel who can be contacted for emergencies, even after hours on their private phones at any time.
Tests in our laboratory free of charge
Data / Performance
Type of sludge Solid concentration [%DS]
Flocculant consumption [kg/t DS]
Waste-activated sludge 0,1 - 1,0 1,0 - 3,0
0,5 - 2,0
2,0 - 3,5
0,5 - 3,0
0,5 - 2,0
Primary sludge
Digested sludge
Sludge of paper industry
Mineral sludge
1,5 - 2,5
1,5 - 3,0
0,5 - 5,0
1,0 - 10,0
Inlet Discharge
5,0 - 9,0
6,0 - 12,0
8,0 - 14,0
10,0 - 20,0
25,0 - 45,0All data are approximate and subject to technical changes. Process results and consumption depend on the sludge characteristic.
1
3
5
Size TD Capacity[m³/h]
Drive[kW]
Weight to operate
[kg]
Measurementslength[mm]
width[mm]
height[mm]
08
2
4
10 - 40
20 - 65
30 - 100
40 - 130
50 - 160
60 - 200
0,75
0,75
1,1
1,5
2,2
3,0
2.100
2.600
3.200
3.900
5.200
5.800
3.210
3.210
3.210
3.210
3.260
3.260
1.620 1.350
2.020
2.520
3.020
3.520
4.020
1.350
1.350
1.350
1.400
1.400
L 3
L 4
L 5
50 - 160
60 - 200
70 - 250
2,2*
3,0*
4,0*
5.500
7.300
9.700
5.360
5.360
5.360
3.020
3.520
4.020
1.450
1.550
1.550* hydraulic aggregate 0,55 kW in addition
BELLMERSubject to technical modifi cations
Separation TechnologyGegr. 1842
Gebr. Bellmer GmbH Maschinenfabrik Hauptstraße 37-43 75223 Niefern-Öschelbronn Phone +49 (7233) 74-0 Fax +49 (7233) 74-215 info.st@bellmer.de www.bellmer.de
... just personal!
L
WW
L
top related