tri-tech medical inc. medical gas outlets. diss ohmeda style allied style puritan style recessed...
Post on 14-Dec-2015
221 Views
Preview:
TRANSCRIPT
Tri-Tech Medical Inc.
Medical Gas Outlets
Medical Gas Outlets DISS Ohmeda style Allied style Puritan style
Recessed wall DISS Recessed ceiling Surface wall Console / Headwall Ambulance / Surgical Arm
Common Backs
Recessed/Console 360º swivel inlet tube 1/2” OD copper tubing Accommodates all styles of
Outlet Latch Plates ETL listed
Ambulance/ Surgical Arm 360º swivel inlet tube DISS or hose barb Accommodates all styles
of Outlet Latch Plates ETL listed
DISS Outlets Frontall™ design Gangable Full faceplate color coding 5 inch centers Primary & secondary
checks 360° positioning of
extension tube
DISS Surface Outlets
Frontall™ design Full faceplate color
coding Primary & secondary
checks
Frontall™ Feature Allows routine service of
both the primary and secondary check valves without removing the nameplate or gas specific portions.
Very fast & easy to service
Primary check cartridge
Repairing DISS Front Bodies These parts would be ordered separately
Cartridge (Negative and Positive gases) Primary Check Seat and Ball Check (Positive gases
only) Chrome-Plated Body
Ohmeda Style Outlets
Ohmeda Style Outlets
Accepts Ohmeda gas specific compatible male adaptors
Gangable 5” centers Allows routine service of both
the primary and secondary check valves.
Full faceplate color coding
Ohmeda Style Surface Outlet
Accepts Ohmeda gas specific compatible male adaptors
Allows routine service of both the primary and secondary check valves.
Full faceplate color coding
Repairing Ohmeda style fronts
Remove screws Remove body and plate
U-clip and washer remain.
Front body and plate
Replace body Replace plate and screw
XQ1000-D Ohmeda style Front Latch Body
Can be ordered as an assembly, or in parts
Allied Style Outlets
Allied Style Outlets Accepts Allied style gas
specific compatible male adapters
Gangable, 5” centers Full faceplate color coding 1/2” OD copper tubing Metal back and front plates 360º swivel inlet tube
Allied Style Surface Outlets
Accepts Allied gas specific compatible male adapters
Full faceplate color coding
Repairing an Allied Style Front
Remove screws Remove body and plate
Position o-ring and washer on new body
Place body on housing and replace plate
Replace Screws
XA1000-D Front Latch Body
Can be ordered as an assembly, or in parts
Puritan Style Outlets
Puritan Style Outlets Accepts Puritan style gas
specific compatible male adapters
Gangable, 5” centers Full faceplate color coding 1/2” OD copper tubing Metal back and front plates 360º swivel inlet tube
Puritan Style Outlets
Accepts Puritan gas specific compatible male adapters
Full faceplate color coding
Repairing a Puritan Style Front Using manual
screwdriver, remove screws
Remove body and small plate
Remove ONLY these parts
Replace parts or entire body
Screw plate back in place with Manual screwdriver.
Do not over tighten
XP1000-E Puritan Latch Body
Can be ordered as an assembly or in parts
Console / Headwall Outlets
Available in DISS, Ohmeda, Puritan and Allied styles
DISS style includes Frontall™ features
Full faceplate color coding
Optional trim plate available
Console / Headwall Outlets
Console / Headwall Outlets
Ambulance / Surgical Arm Outlets
Available in DISS and Quick Connect styles
DISS and hose barb inlet connections
DISS includes Frontall™ features
Full faceplate color coding
DISS x ¼” npt outlets andDISS x hose barb outlets
Fairfield Rail
Fairfield Rail Outlets
Three different styles
Outlet Conversion Kits
Conversion Kits
Conversion Kit - Disassembly
Conversion Kits - Disassembly
Conversion Kits - Installation
Trim Plates
Single gang through six gang Large array of on center spacing Can be customized to meet your needs
Ohmeda to Ohmeda Conversion Kits
Available for Diamond I to Diamond III
Available for Diamond II to Diamond III
Easy to install Easy to service
Other Ohmeda Conversion Kits
Available for Melco/Foregger/Linde 9/16-18 and Chemetron/NCG to Diamond III
Easy to install and service
NFPA 99 REQUIREMENTS FOR STATION OUTLETS/INLETS TRI-TECH PRODUCT
GAS SPECIFIC YES
STATION OUTLET TO HAVE PRIMARY AND SECONDARY CHECK YES
STATION INLET TO HAVE PRIMARY CHECK (SECONDARY CHECK PERMITTED) YES
SECONDARY VALVE TO CLOSE WHEN PRIMARY VALVE IS REMOVED YES
EACH OUTLET/INLET LEGIBLY IDENTIFIED ACCORDING TO 5.1.11.3 YES
THREADED OUTLETS/INLETS SHALL COMPLY WITH CGA V-5 (DISS) YES
STATION OUTLET/INLET COMPONENTS THAT ARE GAS SPECIFIC NOT INTERCHANGEABLE YES
COPPER TUBES ON STATION OUTLETS SHALL BE 3/8 OD MIN AND LESS THAN 8 INCHES LONG YES
COPPER TUBES ON STATION INLETS SHALL BE ½ OD MIN AND LESS THAN 8 INCHES LONG YES
ADDITIONAL TESTING PERFORMED BY TRI-TECH INITIAL PRESSURE TEST AND FINAL TIE IN TEST REQUIRED FOR LEAKAGE AS WELL AS THE OPERATIONAL PRESSURE TEST REQUIRED FOR FLOW IS PERFORMED ON ALL STATION OUTLETS/INLETS PRIOR TO SHIPPING
Tri-Tech Medical Inc.
Gas Control Panels and
Gas Control Panel Conversion Kits
Gas Control Panel Stainless steel front Self-relieving regulator Frontall™ DISS outlet
features High quality ball valve Painted steel rough-in
box 2” Inlet & outlet pressure
gauges
TRI-TECH MEDICAL GAS CONTROL PANELS: FEATURES INCORPORATES A SELF RELIEVING REGULATOR SUPPLY GAGE AND DELIVERY GAGE CARTRIDGE STYLE DISS OUTLET FOR EASY SERVICING USER INSTRUCTIONS ON THE PANEL OUTLET RISER FOR FEEDING DOWNSTREAM EQUIPMENT OR ADDITIONAL OUTLETS CAN DELIVER UP TO 250 PSI WITH AN ADEQUATE SUPPLY PRESSURE CAN BE ORDERED WITH A DISS NITROGEN, INSTRUMENT AIR, OR CARBON DIOXIDE OUTLET NP100 - NITROGEN DISS 1120 IP100 - INSTRUMENT AIR DISS 2080 CP100 - CARBON DIOXIDE DISS 1080
MIDAS REX EQUIPMENT: APPROX 5% OF TOOLS IN FIELD ARE OLDER TOOLS REQUIRING 50
- 200 PSI - 900 CFH - 425 LPM NEW TOOLS REQUIRE 20 - 120 PSI - 720 CFH - 340 LPM OR 481 CFH - 227 LPM NITROGEN CONTROL PANEL MAXIMUM FLOW CAPACITY BASED ON 180 PSI INLET FLOWING TO ATMOSPHERE STATIC DEL FLOW FLOW DEL PRESS PRESSURE PSIG SCFH LPM FLOWING PSIG 100 930 440 96 110 1030 486 106 120 1110 524 114 130 1150 543 119 150 1175 555 120 170 1180 557 120
Gas Control Panel Conversion
Converts existing panels by several major brands
Same features as our regular panel
Easy to install using a universal mounting plate over existing back box
Gas Control Panel Conversion
Existing back box
Gas Control Panel Conversion
Installing conversion connections
Gas Control Panel Conversion
Installing conversion plate
Gas Control Panel Conversion
Back of the front panel conversion
Gas Control Panel Conversion
Connecting tube
Gas Control Panel Conversion
Installing gas control panel
top related