the simple solution. one complete system
Post on 03-Feb-2022
5 Views
Preview:
TRANSCRIPT
Male abutment hex witha one-degree taper
Internal hex 1.5mm deep
Lead-in bevel
Prosthetic versatility.
Zimmer Dental has gained the trust of thousands of clinicians
worldwide who count on our comprehensive line of products
designed to deliver successful patient outcomes.
Zimmer’s proprietary friction-fit internal hex connection is a unique combination of
designs that has been shown to reduce stress on crestal bone and resist abutment
screw loosening, thus creating favorable conditions for bone level maintenance.1-3
• Cement-Retained Restorations
• Screw-Retained Restorations
• Custom Restorations
• Overdenture Restorations
• Tissue Healing
• Impression Transfer
• Provisional Restorations
• A lead-in bevel and 1.5mm deep internal hex reduce horizontal bone stresses and distribute forces deep within the implant, thereby shielding the retention screw from excessive loading.1-3
• The proprietary friction-fit component of the connection virtually eliminates abutment micromovement (a primary cause of screw loosening) when tightened to the recommended 30 Ncm of applied torque.1 This means fewer return patient visits, less chair time, and increased patient satisfaction.
An implant platform designed for success.
Advantages of the friction-fit internal hex connection
By streamlining the implant restorative process with a more user-friendly, versatile, and innovative family
of prosthetic options, Zimmer Dental has again reinforced its commitment to offering meaningful solutions
to clinicians. An extensive range of easy-to-use choices are available for your restorative needs, including
components for:
1 Binon PP. The evolution and evaluation of two interference-fit implant interfaces. Postgraduate Dent. 1996;3:3-13.
2 Chun HJ, Shin HS, Han CH, Lee SH. Influence of implant abutment type on stress Distribution in bone under various loading conditions using finite element analysis. Int J Oral Maxillofac Implants. 2006;21:105-202.
3 Mihalko WM, May TC, Kay JF, Krause WR. Finite element analysis of interface geometry effects on the crestal bone surrounding a dental implant. Implant Dent. 1992;1:212-217.
Innovations designed for esthetic enhancement.
Enhance efficiency and esthetics with these additions to
the Tapered Screw-Vent Implant System.
Zimmer® Patient Specific Abutments
Hex-Lock® Short Abutment and Restorative System
A beautiful fit right off the shelf, in
17˚ angled and straight versions.
Off-the-shelf convenience and simplicity for the posterior.
Short abutments provide options for limited interocclusal
space with the same simplified protocols as the
Hex-Lock Contour System.
Soft tissue management with esthetics in mind. Available in a variety of configurations –
including straight and angled options –
enabling clinicians to
select the optimal abutment
for each individual clinical case.
Plastic Temporary Abutments
Zimmer Contour Zirconia Abutments
Computer-aided design and custom-milled precision, with Zimmer’s
proprietary friction-fit connection in titanium, and zirconia with a
titanium interface ring.
4.5mmD Tan
5.5mmD Rose
6.5mmD Yellow
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Implant Platform
Catalog No.
Implant Platform
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
4.5mmD 5.5mmD 6.5mmD
Implant Platform Color-Coding
Indirect Transfer(for closed-tray impressions – includes screw p/n HLTS2)
Healing Collar
Fixture Mount/ Transfer(includes screw p/n URS2)
Implant Analog
Direct Transfer(for open-tray impressions – includes screw p/n DHTS)
4.5mmD PlatformEmergence
ProfileCatalog
No.HLT3/3 HLT3/4 HLT3/5
HLT4/4HLT4/5HLT4/6
4.5mmD5.5mmD6.5mmD
HLT5/6 6.5mmD
DHT3/3 DHT3/4 DHT3/5
3.5mmD4.5mmD5.5mmD
DHT4/4DHT4/5DHT4/6
Implant Platform
Catalog No.IA3 3.5mmD IA4 4.5mmD IA5
3.5mmD PlatformCuff
HeightHC333HC335HC343HC345HC347HC353HC355
3.5mmD3.5mmD4.5mmD4.5mmD4.5mmD5.5mmD5.5mmD
3mm5mm3mm5mm7mm3mm5mm
4.5mmD Platform
3mm5mm3mm5mm7mm3mm5mm
5.7mmD Platform
HC563HC565
6.5mmD6.5mmD
3mm5mm
FMT3 4.5mmD FMT4 5.5mmD FMT5 6.5mmD
5.7 mmD
Note: Direct Transfer for open-tray procedures is not available for 6.0mmD implants with 5.7mmD platforms (please see Indirect Transfer above).
CuffHeight
CuffHeight
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Plastic Temporary Abutment, Straight
3.5mmD PlatformCuff
HeightPT341SPT344S
4.5mmD4.5mmD
1mm4mm
4.5mmD Platform
PT451SPT454S
5.5mmD5.5mmD
1mm4mm
5.7mmD Platform
PT561SPT564S
6.5mmD6.5mmD
1mm4mm
CuffHeight
CuffHeight
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.Plastic Temporary
Abutment, 17°
CuffHeight
PT341APT344A
4.5mmD4.5mmD
1mm4mm
PT451APT454A
5.5mmD5.5mmD
1mm4mm
CuffHeight
Tissue Healing, Impression Transfer Components, and Provisional Restorations
3.5mmD Platform 4.5mmD Platform 5.7mmD Platform
Implant Diameter Implant Platform Color-coding
3.7mmD 3.5mmD
4.1mmD 3.5mmD
4.7mmD 4.5mmD Purple
6.0mmD 5.7mmD Yellow
Note: Plastic Abutments include retaining screw p/n PTSC and long processing screw p/n DHTS2.
How to use this guide:
Tapered Screw-Vent and Screw-Vent® Implants are available in multiple sizes with three color-coded prosthetic platforms: 3.5mmD, 4.5mmD and 5.7mmD. Choose the implant prosthetic platform you wish to restore, then follow the color-coding to identify the appropriate components for your procedure.
Abutment Emergence Profile* Color-coding
Green
* For Hex-Lock Contour and Short Restorative components.
Tissue Healing
3.5mmD Platform 5.7mmD Platform
3.5mmD 4.5mmD 5.5mmD
Impression Transfer
Plastic Temporary Abutments, Straight and 17°
Fixture Mount/Transfer
4.5mmD 4.5mmD 5.5mmD5.5mmD5.5mmD6.5mmD6.5mmD
HC443 HC445 HC453HC455HC457HC463HC465
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
3.5mmD Platform 4.5mmD Platform 5.7mmD PlatformEmergence
ProfileCatalog
No.HLA3/3HLA3/4HLA3/5
3.5mmD 4.5mmD 5.5mmD
HLA4/4HLA4/5HLA4/6
4.5mmD5.5mmD6.5mmD
HLA5/6 6.5mmD
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Contour Abutment Try-In and Try-In Kit
Note: Catalog No. ZOATKIT includes all 3 sets of 5 Try-ins.
ZORKIT4S
4.5mmD Emergence Profile
ZORKIT4S
4.5mmD Emergence Profile 5.5mmD Emergence Profile
6.5mmD Emergence Profile
ZORKIT5S ZORKIT6S
SAKIT4
4.5mmD Emergence Profile 5.5mmD Emergence Profile 6.5mmD Emergence Profile
SAKIT5 SAKIT6
ZORKIT5A
6.5mmD Emergence Profile
ZORKIT6AZORKIT4A
4.5mmD Emergence Profile
ZORKIT4A
3.5mmD Platform
ZOAT34 4.5mmD
4.5mmD Platform
ZOAT45 5.5mmD
5.7mmD Platform
ZOAT56 6.5mmD
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Hex-Lock Contour Abutment, Straight(includes screw p/n MHLAS)
3.5mmD PlatformCuff
HeightZOA341SZOA342SZOA343S
4.5mmD4.5mmD4.5mmD
1mm2mm3mm
4.5mmD Platform
ZOA441SZOA442SZOA443S
ZOA451SZOA452SZOA453S
4.5mmD 4.5mmD 4.5mmD
5.5mmD5.5mmD5.5mmD
1mm2mm3mm
1mm2mm3mm
5.7mmD Platform
ZOA561SZOA562SZOA563S
6.5mmD6.5mmD6.5mmD
1mm2mm3mm
CuffHeight
CuffHeight
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
3.5mmD PlatformCuff
HeightSA341SA342
4.5mmD4.5mmD
1mm2mm
4.5mmD Platform
SA451SA452
5.5mmD 5.5mmD
1mm2mm
5.7mmD Platform
SA561SA562
6.5mmD6.5mmD
1mm2mm
CuffHeight
CuffHeight
Set of 5: Various Angles, Cuff Heights
Set of 5: Various Angles, Cuff Heights
Set of 5: Various Angles, Cuff Heights
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Hex-Lock Contour Abutment, 17°(includes screw p/n AH20S)
3.5mmD PlatformCuff
HeightZOA341AZOA342A
4.5mmD4.5mmD
1mm2mm
4.5mmD Platform
ZOA441AZOA442A
ZOA451AZOA452A
4.5mmD 4.5mmD
5.5mmD5.5mmD
1mm2mm
1mm2mm
5.7mmD Platform
ZOA561AZOA562A
6.5mmD6.5mmD
1mm2mm
CuffHeight
CuffHeight
Hex-Lock Short Abutment(includes screw p/n MHLAS)
4.5mmD Emergence Profile 5.5mmD Emergence Profile
Hex-Lock Abutment(includes screw p/n MHLAS)
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
AH20/4 4.5mmD AH20W/5 5.5mmD A5H20/6 6.5mmD
Angled Abutment, 20,̊ for 6 Positions(includes screw p/n AH20S)
Contour Restorative Kit, Straight(includes impression cap, analog, provisional and waxing copings)
Contour Restorative Kit, 17°(includes impression cap, analog, provisional and waxing copings)
Short Abutment Restorative Kit(Includes impression cap, analog, provisional and waxing copings)
3.5mmD for 6 Positions 4.5mmD for 6 Positions 5.7mmD for 6 Positions
Cement-Retained Restorations
Hex-Lock Short Abutment
Hex-Lock Contour Abutment, 17°
Hex-Lock Abutment, Straight, and Angled Abutment, 20°
Hex-Lock Contour Abutment, Straight
Abutment Try-Ins
Zimmer Contour Zirconia Abutment, 17° (includes screw p/n AH20S)
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
Zimmer Contour Zirconia Abutment, Straight(includes screw p/n AH20S)
3.5mmD PlatformCuff
HeightZRA341SZRA342S
4.5mmD4.5mmD
1mm2mm
4.5mmD Platform
ZRA451S ZRA452S
5.5mmD5.5mmD
1mm2mm
CuffHeight
Emergence Profile
Catalog No.
Emergence Profile
Catalog No.
CuffHeight
ZRA351AZRA352A
5.0mmD5.0mmD
1mm2mm
ZRA461AZRA462A
6.0mmD6.0mmD
1mm2mm
CuffHeight
Cement-Retained Zirconia Restorations
Tapered Abutment
Tapered Abutment(includes a healing cap p/n TATHC)
CuffHeight
Catalog No.
CuffHeight
Catalog No.
3.5mmD Platform 4.5mmD Platform 5.7mmD PlatformCuff
HeightCatalog
No.TA5C1TA5C2TA5C3TA5C4
.75mm2mm3mm4mm
TAC1TAC2TAC3TAC4TAC5
.75mm2mm3mm4mm5mm
TACW1TACW2TACW3TACW4TACW5
.75mm2mm3mm4mm5mm
Screw-Retained Restorations
Tapered Abutment Indirect and Direct
Transfers
ACTIT ACTDT
Tapered Abutment Gold Coping with Screw
(p/n SCTS)
ACTGC
Tapered Abutment Bar Gold Copings
with Screw
TGC5TGC3
Tapered Abutment Replica(Represents Tapered Abutment
Attached to Implant)
ACTR
Tapered Abutment Titanium Bar Coping
with Screw (p/n SCTS)
TTC5
Tapered Abutment Components
Plastic Castable Coping with Screw
(p/n SCTS)
ACTP
Titanium Temporary Coping with Screw
(p/n SCTS)
ACTT
Angled Tapered Abutment, 30˚ (includes preassembled retaining screw)
CuffHeight
CuffHeight
Catalog No.
Catalog No.
Angled Tapered Abutment, 15˚ (includes preassembled retaining screw)
3.5mmD Platform
3.5mmD Platform
4.5mmD Platform
4.5mmD Platform
CuffHeight
CuffHeight
Catalog No.
Catalog No.
15AT31215AT32315AT334
30AT32430AT33530AT346
1mm/2mm2mm/3mm3mm/4mm
2mm/4mm3mm/5mm4mm/6mm
15AT41215AT42315AT434
30AT42430AT43530AT446
1mm/2mm2mm/3mm3mm/4mm
2mm/4mm3mm/5mm4mm/6mm
Zimmer Contour Zirconia Abutment, Straight and 17°
“Cast-To” Gold Abutment, Non-Engaging(includes screw p/n MHLAS)
Note: Zimmer Patient Specific Abutment is also available. Please contact a Zimmer Dental representative for additional information.
Implant Platform
Catalog No.
Implant Platform
Catalog No.
“Cast-To” Gold Abutment, Engaging(includes screw p/n MHLAS)
3.5mmD Platform 4.5mmD Platform 5.7mmD PlatformImplant Platform
Catalog No.
HLA3G 3.5mmD HLA4G 4.5mmD HLA5G 5.7mmD
Implant Platform
Catalog No.
Implant Platform
Catalog No.
NEA3G 3.5mmD NEA4G 4.5mmD
Custom RestorationsCustom Restorations, Engaging and Non-Engaging
Male Processing Package
LOCMP2
Bar Female
LOCBF2 LOCCTB
Cast-ToBar Female
LOCLBF
Laser BarFemale
Note: Replacement Males are available. See product catalog.
Impression Coping
LOCIMP
Abutment Analog
LOCAN/4
Parallel Post
LOCPP
Locator Components
CuffHeight
Catalog No.
CuffHeight
Catalog No.
Locator® Abutment for Tapered Screw-Vent and Screw-Vent Implants
Locator Abutment
3.5mmD Platform 4.5mmD Platform 5.7mmD PlatformCuff
HeightCatalog
No.TLOC3/0TLOC3/1TLOC3/2TLOC3/3TLOC3/4TLOC3/5TLOC3/6
0mm1mm
2.5mm3.5mm4.5mm5.5mm6.5mm
TLOC4/0TLOC4/1TLOC4/2TLOC4/3TLOC4/4 TLOC4/5TLOC4/6
0mm1mm2mm3mm4mm5mm6mm
TLOC5/1TLOC5/2TLOC5/3TLOC5/4
1mm2mm3mm4mm
Prosthetic Tools
Description Catalog No.
Catalog Numbers
Hex Driver, Short, with GemLock® Retention (1.25mmD, 22mmL) HXGR1.25
Hex Driver, Long, with GemLock Retention (1.25mmD, 30mmL) HXLGR1.25
Hex Driver, Short, Standard (1.25mmD, 17mmL) HX1.25
Hex Driver, Long, Standard (1.25mmD, 22mmL) HXL1.25
Latch-Lock Hex Driver for Surgical and Prosthetic Screws HX1.25D (May Require Reduction Handpiece) (1.25mmD, 23mmL)
Latch-Lock Hex Driver for Surgical and Prosthetic Screws HXL1.25D (May Require Reduction Handpiece) (1.25mmD, 26mmL)
Removal Tool for Internal Hex Implant Abutments TLRT2
Torque Wrench, Restorative (Adjustable Torque Range 10 Ncm – 35 Ncm) TWR
Torque Wrench Insert Hex Driver, Short, 1.25mmD TW1.25
Torque Wrench Insert Hex Driver, Long, 1.25mmD TW1.25L
Locator Torque Wrench Insert Driver, Short, 15mmL LOCTW15
Locator Torque Wrench Insert Driver, Long, 21mmL LOCTW21
Locator Core Tool LOCCT2
Abutment Holder (Requires Implant Analog to Attach Abutments) ABTH
Overdenture Restorations
Zimmer Patient-Specific Abutments Computer-aided design and custom-milled precision. Please contact a Zimmer Dental representative for additional information.
Male Processing Package Extended Range
LOCMPX2
©20
12 Z
imm
er D
enta
l Inc
. All
righ
ts r
eser
ved.
492
5, R
ev. 5
/12.
Loc
ator
Abu
tmen
ts a
re m
anuf
actu
red
by Z
est A
ncho
rs, L
LC a
nd d
istr
ibut
ed b
y Zi
mm
er D
enta
l Inc
. Loc
ator
is a
reg
iste
red
trad
emar
k of
Zes
t IP
Hol
ding
s, L
LC.
Plea
se n
ote
that
not
all
prod
ucts
are
reg
iste
red
or a
vaila
ble
in e
very
cou
ntry
/reg
ion.
Ple
ase
chec
k w
ith
a Zi
mm
er D
enta
l rep
rese
ntat
ive
for
avai
labi
lity
and
addi
tion
al in
form
atio
n.
www.zimmerdental.com
To receive our eNews visit us at http://www.zimmerdental.com/news_eNewsLetterSignUp.aspx
In the U.S. 1 (800) 854-7019To fax an order 1 (888) 225-2483Outside the U.S. +1 (760) 929-4300Australia +61 (0)2 9950 5434 or 1 (800) 241 916Canada + 1 (905) 567-2073 or 1 (800) 265-0968China +86 21 22115147
France +33 (0)1 45 12 35 35Germany +49 (0)761 1 56 47 0Israel +972 (0)3 6124242Italy +39 043 855 5573Spain +34 93 846 05 43
For more information about our Products, Regenerative Materials and Educational Opportunities, contact us:
1900 Aston Avenue Carlsbad, CA 92008-7308USA
top related