the next generation of green˜eld connectors spec-˜exconnectors · connector system save time on...
Post on 05-Apr-2020
4 Views
Preview:
TRANSCRIPT
The Next Generation of Green�eld Connectors
Made in the USA
Saves Labor on Every Connection No Screw or Crimp Required to Install Simply, Turn It On Your FMCExceeds UL Pullout Requirements by 300%No Screws to Pinch or Pierce ConduitMaintains Full Integrity of the Conduit Count On a Safe Burr-less Wire PullFully-Machined Solid Steel or Aluminum Furnished with Industrial Grade Steel Locknut
AMERICAN FITTINGS Corporation
800.221.5268amftgs.com
Fair Lawn, New JerseySince 1946
© 2015 AMERICAN FITTINGS
®
Our �ex System is Your Solution for Electrical RunsSPEC-�ex TM
connectors
TURN IT ON withSPEC-�ex connectors
Full flex Connector System Straight Connectors, 45° & 90°
FMC to Liquid Tight, Flexible Cord,EMT & Rigid Conduit
1/2” to 4”
Made in the USA
Solid Steel or Aluminum
Straight Connectors for Enclosures orUse Our Adapters to Transition Your Conduit & Cable
Patent Pending
GUARANTEED toSave Time On Every Connection You Make.
™
90° and 45° Adapters Used to Connect FMC to a Box or Enclosure
Sizes Available 1/2” - 2” * Trade Sizes, in Steel or AluminumSolid Steel Fully Machined FMC SPEC-�ex ConnectorsMade in the USA
Patent Pending, Uniquely Engineered for Industrial Projects and OEM Product Performance and Reliability
Superior Performance for Secure Connectors and Fast DisconnectGripsTight, Grips Right on Every ConnectionFittings are FULLY Reuseable, No Need to Crimp or Pinch
90° AdapterFMC to Enclosure
45° AdapterFMC to Enclosure
Straight Connector1/2” - 4”
FMC to Enclosure
Furnished with Industrial Grade Locknut, Sealing Washer and Insulated Throat
SPEC-flex Adapters Convert Greenfield - FMC to Pipe. LT or Cord Industrial Products for Demanding Conditions
Adapters Used to Easily Transition FMC to EMT, Rigid Conduit, Portable Cord, or Liquid Tight Cableand Conform to UL speci�cations, Made in the USA
Sizes Available 1/2” - 2” * Consult factory for larger trade sizes
The Most Secure Connection in the Market.
Green�eld to LT or Portable Cord
Liquid TightCord
Green�eld
Rigid orEMT
ADAPTERSSPEC�ex TM
Green�eld to Conduit Available Set Screw & Compression EMT or Rigid Conduit
AMERICAN FITTINGSCorporation
Made in the USA Since 1946
Easily Transition Green�eld into Your Electrical RunsWhen You Turn On with SPEC�ex
Products Guaranted for Life
Our �ex-System is Your Industrial Solution
Innovation, Made in the USA
Avoid the Issues with Inferior Die Cast Fittings
® SPEC�ex
TM
Connector System ™
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure capatibility.
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
AMFTGS.com t: 800.221.5268 e:info@amftgs.com© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
DInsideDepth
C
®
TM
SPEC�ex TM
B
A
Solid Alloy Steel Fully Machined SPEC�ex Connector ™Industrial Grade Green�eld to Enclosure ConnectorMade in the USA Alloy Steel Zinc Electro Plated or Aluminum
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product PerformanceSecure Connection and Fast DisconnectNo Tools Required to Install on FMCExceeds UL Pull-Out Requirements by 300%
FULL Connector System Available for Transitions from Green�eld to EMT, Rigid, LT, & Flexible Cord90º and 45º Connectors Available
Installs On Green�eld with a Few Easy Turns
No Tools RequiredØ
Patent Pending
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure compatibility.
* Steel is Zinc Electro Plated for Full Corrosion Resistance
FLX.
AM
2296
B
Saves Labor on Every Connection No Screws to Pinch or Pierce ConduitAlloy Steel Construction* NOT a Thin Wall Die Cast FittingMaintains Full Integrity of Conduit ID & ODAllows More Room Inside Conduit For WireYou Can Count-On a Safe Burr-less Wire Pull
SPEC�ex Connectors
AMERICAN FITTINGSCorporation
®
SPEC�ex FMC Connector Fittings
1/2” to 4”
Unique industrial grade locknut bites intoany box or enclosue for full bonding and
an Insulated UL ListedThroat Bushing are standard.
Cat # Trade Size Mat’l * A B hex D
FLX50B 1/2” Alloy Steel
Alloy Steel
Alloy Steel
Alloy Steel
Alloy Steel
Alloy Steel
Alloy Steel
Alloy Steel
Alloy Steel
Alloy Steel
1-5/32” 1-1/8” 1-9/16” 1-1/16”
FLX75B 3/4” 1-7/16” 1-3/8” 1-9/16” 1-1/16”
FLX100B 1” 1-11/16” 1-5/8” 1-5/8” 1-1/16”
FLX125B 1-1/4” 2-1/32” 1-31/32” 1-5/8” 1-1/16 “
FLX150B 1-1/2” 2-9/32”’ 2-3/16”’ 1-29/32” 1-1/4”
FLX200B 2” 2-29/32” 2-29/32” 2” 1-9/32”
FLX250B 2 - 1/2” 3-13/32” 2-3/4” 2-1/2” 1-9/32”
FLX300B 3” 4” 3-29/32” 2-9/16” 1-5/16”
FLX350B 3 1/2” 4-9/16” 4-13/32” 2-9/16” 1-5/16”
FLX400B 4” 5-3/32” 4-29/32” 2-9/16” 1-5/16”
AMERICAN FITTINGSCorporation
Made in the USA Since 1946
®
Cat # Trade Size A B C hex E
FLX5090B 1/2” 3-3/8” 1-15/16” 1-1/8” 1-3/16”
FLX7590B 3/4” 3-19/32” 2-5/32’ 1-3/8” 1-11/32”
FLX10090B 1” 4 ” 2-11/16” 1-5/8” 1-11/16”
FLX12590B 1 1/4” 4-5/16” 2-15/16” 1-31/32” 2 “
FLX15090B 1 1/2” 5-1/16” 3-3/16” 2-3/16” 2-1/4”
FLX20090B 2” 5-21/32” 3-23/32” 2-25/32” 2-3/4”
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product Performance
Superior Performance for Secure Connectors and Fast DisconnectGripsTight, Grips Right on Every Connection
FLX-
Ada
pt A
M11
97.B
Industrial SPEC-�ex TM
1/2” to 2”
FMC to Enclosure90 ˚ Conduit Adapters
SPEC�ex TM
Connection toBox or Enclosure
(NPT Thread)D Ø
A
B
Insuated Throat(Bushing)
Industrial GradeLocknut
Sealing Washer
Connector System
90 ˚ AdapterFMC to EnclosureMade in the USA
SPEC�ex Industrial Grade FMC Connectors 90° Adapters
C
Furnished with Our Industrial Grade Locknut and Sealing Washer with anOptional UL Component Temperature Rated 150°c Insulated Throat
FLEX Series Industrial Flexible Metal Conduit Connectors
Solid Steel Fully Machined FMC SPEC-�ex ConnectorsMade in the USA90° Adapter Used to Connect FMC to a Box or Enclosure
Save Time on Every Connection!
Note: SPEC�ex connectors are designed to work and interface with UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-UL o�-shore conduit. Request a sample from factory to ensure capability.
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
AMERICAN FITTINGSCorporation
Made in the USA Since 1946
®
Cat # Trade Size A B C hex E
FLX5045B 1/2” 3-21/32” 1-21/32” 1-1/8” 1-3/16”
FLX7545B 3/4” 3-25/32” 1-15/16” 1-3/8” 1-11/32”
FLX10045B 1” 4 ” 2-5/32” 1-5/8” 1-11/16”
FLX12545B 1 1/4” 4-1/4” 2-15/32” 1-31/32” 2 “
FLX15045B 1 1/2” 5 “ 2-25/32” 2-3/16” 2-1/4”
FLX20045B 2” 5-1/2” 3-5/16” 2-25/32” 2-3/4”
FLX-
Ada
pt A
M11
98.B
SPEC�ex TM
Connection toBox or Enclosure
(NPT Thread)
A
B
Insuated Throat(Bushing) Industrial Grade Locknut
Sealing Washer
Connector System
45 ˚ AdapterFMC to EnclosureMade in the USA
SPEC�ex Industrial Grade FMC Connectors 45° Adapters
C
D Ø
Industrial SPEC-�ex TM
1/2” to 2”
FMC to Enclosure45 ˚ Conduit Adapters
Furnished with Our Industrial Grade Locknut and Sealing Washer with anOptional UL Component Temperature Rated 150°c Insulated Throat
FLEX Series Industrial Flexible Metal Conduit Connectors
Solid Steel Fully Machined FMC SPEC-�ex ConnectorsMade in the USA45° Adapter Used to Connect FMC to a Box or Enclosure
Save Time on Every Connection!
Note: SPEC�ex connectors are designed to work and interface with UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-UL o�-shore conduit. Request a sample from factory to ensure capability.
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product Performance
Superior Performance for Secure Connectors and Fast DisconnectGripsTight, Grips Right on Every Connection
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
AMERICAN FITTINGSCorporation
Industrial SPEC-�ex AdapterFMC to Flexible Cord
1/2” - 2” Made in the USA Since 1946
FKXC
G. A
M11
94.C
®
SPECConnector System
Save Time on Every Connection!
FLEX Series Industrial Flexible Metal Conduit AdapterTransitions FMC (Green�eld) to Flexible Non-Metallic Cord Made in the USA
Solid Steel Fully Machined SPEC�ex Connector withAMFICO Industrial Grade Flexible Cord & Cable Connector
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product PerformanceSuperior Performance for Secure Connection and Fast DisconnectNo Tools Required to Install Connector on FMC Conduit
Green�eld to Flexible Cord
Cat # Trade Size A
FLXCG 50 1/2”
FLXCG 75 3/4”
FLXCG 100 1”
FLXCG 125 1-1/4”
FLXCG 150 1-1/2”
FLXCG 200 2”
1-5/32”
1-7/16”
1-11/16”
2-1/32”
2-9/32”
2-7/8”
1-1/32”
1-9/32”
1-9/16”
1-15/16”
2-9/32”
2-25/32”
1-1/8”
1-3/8”
1-5/8”
1-31/32”
2-3/16”
2-25/32”
Grips Tight and Right on Every Connection
SPEC�ex Flexible Cord Adapters
C B
A
hexhex
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure capatibility.
FMC (Green�eld) Flexible Cord or Cable
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
AMERICAN FITTINGSCorporation
Industrial SPEC-�ex AdapterFMC to Liquid Tight
1/2” - 2”Made in the USA Since 1946
FKXL
T.A
M11
93.D
®
SPECConnector System
Green�eld to Liquid Tight
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure capatibility.
Cat # Trade Size A
FLXLT50 1/2” 2-7/16” 1-1/8” 1-1/8”
FLXLT75 3/4” 2-1/2” 1-3/8” 1-3/8”
FLXLT100 1” 2-9/16” 1-11/16” 1-5/8”
FLXLT125 1-1/4” 2-31/32” 2-1/16” 1-21/32”
FLXLT150 1-1/2” 3-3/8” 2-9/32” 2-3/16”
FLXLT200 2” 3-9/16” 2-25/32” 2-25/32”
SPEC�ex Liquid Tight Adaptershex hex
Save Time on Every Connection!
FLEX Series Industrial Flexible Metal Conduit AdapterTransitions FMC (Green�eld) to Liquid Tight ConduitMade in the USA
Solid Steel Fully Machined SPEC�ex Connector withAMFICO Industrial Grade Liquid Tight Conduit Connector
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product PerformanceSuperior Performance for Secure Connection and Fast DisconnectNo Tools Required to Install Conduit
FMC Green�eld Liquid TightConduit
Grips Tight and Right on Every ConnectionA
C B
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
EMT
AMERICAN FITTINGSCorporation
Industrial SPEC-�ex AdapterFMC to EMT Set Screw
1/2” - 2”Made in the USA Since 1946
FLXE
MT.
SS .A
M15
75.B
®
SPEC Connector System
Save Time on Every Connection!
FLEX Series Industrial Flexible Metal Conduit AdapterTransitions FMC (Green�eld) to EMT Made in the USA
Solid Steel Fully Machined SPEC�ex Connector withAMFICO Industrial EMT Set Screw FittingFittings are Solid Steel Zinc Plated
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product PerformanceSuperior Performance for Secure Connection and Fast DisconnectNo Tools Required to Install Connector on Flex Conduit
Green�eld to EMT Set Screw
Cat # Trade Size A
FLXSS 50 1/2” 2-5/8” 15/16” 1-1/8”
FLXS S 75 3/4” 2-21/32” 1-3/16” 1-3/8”
FLXS S 100 1” 2-31/32” 1-7/16” 1-5/8”
FLXS S 125 1-1/4” 3-7/32” 1-13/16” 1-31/32”
FLXS S 150 1-1/2” 3-23/32” 2-1/16” 2-13/16”
FLXS S 200 2” 3-23-32” 2-9/16” 2-25/32”
.
Grips Tight and Right on Every Connection
SPEC�ex EMT SET SCREW AdaptersNote: Also available in Compression EMTLiquid TightCord Connectors
C
A B
hex hex
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure capatibility.
Green�eldFMC
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
AMERICAN FITTINGSCorporation
Industrial SPEC-�ex AdapterFMC to EMT Compression
1/2” - 2”Made in the USA Since 1946
FLXE
MT.
AM
1195
.B
®
SPEC Connector System
Save Time on Every Connection!
FLEX Series Industrial Flexible Metal Conduit AdapterTransitions FMC (Green�eld) to EMT Made in the USA
Solid Steel Fully Machined SPEC�ex Connector withAMFICO Industrial EMT Compression CouplingFittings are Solid Steel Zinc Plated
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product PerformanceSuperior Performance for Secure Connection and Fast DisconnectNo Tools Required to Install Connector on Flex Conduit
Green�eld to EMT Compression
Cat # Trade Size A
FLXEMT50 1/2” 2-7/16” 15/16” 1-1/8”
FLXEMT75 3/4” 2-15/32” 1-3/16” 1-3/8”
FLXEMT100 1” 2-17/32” 1-7/16” 1-5/8”
FLXEMT125 1-1/4” 2-11/16” 1-13/16” 1-31/32”
FLXEMT150 1-1/2” 3-5/32” 2-1/16” 2-3/16”
FLXEMT200 2” 3-5/16” 2-9/16” 2-25/32”
.
Grips Tight and Right on Every Connection
SPEC�ex EMT Compression Adapters
Green�eldFMC
A
C B
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure capatibility.
hex hex
EMT
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
AMERICAN FITTINGSCorporation
Industrial SPEC-�ex AdapterFMC to Rigid Conduit Set Screw
1/2” - 2”Made in the USA Since 1946
FLXS
NT.
AM
1662
.A
®
SPEC Connector System
Save Time on Every Connection!
FLEX Series Industrial Flexible Metal Conduit AdapterTransitions FMC (Green�eld) to Rigid / IMC Conduit Made in the USA
Solid Steel Fully Machined SPEC�ex Connector withAMFICO Industrial Rigid Conduit Set Screw FittingFittings are Solid Steel Zinc Plated
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product PerformanceSuperior Performance for Secure Connection and Fast DisconnectNo Tools Required to Install Connector onFlex Conduit
Green�eld to Rigid Conduit Set Screw
Cat # Trade Size A
FLXSNT 50 1/2” 2-3/4” 1-1/8” 1-1/8”
FLXS NT 75 3/4” 3-25/32” 1-11/32” 1-3/8”
FLXS NT 100 1” 3-1/8” 1-5/8” 1-5/8”
FLXS NT 125 1-1/4” 3-5/16” 2-1/32” 1-31/32”
FLXS NT 150 1-1/2” 3-13/16” 2-9/32” 2-13/16”
FLXSNT 200 2” 4-1/32” 2-25/32” 2-25/32”
.
Grips Tight and Right on Every Connection
SPEC�ex to RIGID Conduit SET SCREW Adapters
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure compatibility. hex hex
A
C B
Rigid / IMCConduit
Green�eldFMC
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
AMERICAN FITTINGSCorporation
Industrial SPEC-�ex AdapterFMC to Rigid Conduit Compression
1/2” - 2”Made in the USA Since 1946
FLXS
NT.
AM
1732
.A
®
SPEC Connector System
Save Time on Every Connection!
FLEX Series Industrial Flexible Metal Conduit AdapterTransitions FMC (Green�eld) to Rigid / IMC Conduit Made in the USA
Solid Steel Fully Machined SPEC�ex Connector withAMFICO Industrial Rigid Conduit NT Compression FittingFittings are Solid Steel Zinc Plated
Patent Pending Uniquely Engineered for Industrial Projects andOEM Product PerformanceSuperior Performance for Secure Connection and Fast DisconnectNo Tools Required to Install Flex Conduit
Green�eld to Rigid Conduit NT Compression
Cat # Trade Size A
FLXNT 50 1/2” 2-3/4” 1-1/8” 1-1/8”
FLXNT 75 3/4” 3-25/32” 1-11/32” 1-3/8”
FLXNT 100 1” 3-1/8” 1-5/8” 1-5/8”
FLXNT 125 1-1/4” 3-5/16” 2-1/32” 1-31/32”
FLXNT 150 1-1/2” 3-13/16” 2-9/32” 2-13/16”
FLXNT 200 2” 4-1/32” 2-25/32” 2-25/32”
.
Grips Tight and Right on Every Connection
SPEC�ex to RIGID Conduit Compression NT Adapters
Note: SPEC�ex connectors are designed to work and interfacewith UL listed, Made in USA FMC / Green�eld conduit.We cannot guarantee �t, form, or function with non-ULo�-shore conduit. Request a sample from factory to ensure compatibility.
Rigid / IMCConduit
Green�eldFMC
hex hex
A
C B
AMFTGS.com t: 800.221.5268 e:info@amftgs.com
© Copyright 2015 AMERICAN FITTINGS Corporation, Fair Lawn, New Jersey Speci�cations Subject to Change Without Notice
TRUST ONE NAME AMERICAN FITTINGS
Our Bene�ts to You
SPEC-grade Industrial Electrical Fittings
AMERICAN FITTINGSCorporation
™
Made in the USA Since 1946
Sold Exclusively Through Authorized Electrical Distributors
Fully Machined Solid Steel Construction Manufactured in the USA The Perfect Connection for
Quality has one name, AMERICAN amftgs.comTM
LC05.15 © 2015 American Fittings Corp.
FULL-LINE Manufacturer, Enabling One Source Specs & PurchaseSAVE On Installation Time & CostsRELIABILITY Since 1946 Consistency, Durability, & Strength VALUE Eliminate Scrapping Cracked & Stripped FittingsSUPERIOR On Time Delivery & Personalized ServicesALWAYS Meet Job Speci�cations, with Our Fittings - GuaranteedNEVER Camou�aged O�-Shore Parts Sold in ‘Brand Name’ Boxes
NO SURPRISES, You Will Always Get What You Ordered. . .When You Open Our Box You Will ALWAYS Find an AMERICAN MadeFitting. Full Traceability, & Material Certs are Always Available. All Products Carry a100% Product Performance Guarantee
AgricultureAlternative Energy
Federal & State ProjectsFood Processing & Production
Industrial ApplicationsMilitary Bases
OEM EquipmentOil & Gas Projects
Paper & PulpTransportation
Waste Water Treatment
EMT & Rigid Conduit FittingsLiquid Tight FittingsCord & Cable ConnectorsFMC ConnectorsGreen�eld ConnectorsGround BushingsAMFICO HubsReducing BushingsChase NipplesMTO SpecialsAluminum & Stainless Steel
®
AMERICAN FITTINGS Corporation17-10 Willow Street Fair Lawn, NJ 07410 t: 800.221.5268 | f: 201.664.1175
Online: amftgs.com e: info@amftgs.comProduct Cut Sheets Are Available Online
Liquid-TIGHT Fittings
Cord GRIP Connectors
EMT & Rigid Conduit Fittings
Made in the USA
top related