the lever lab/page 2
Post on 11-Jan-2016
27 Views
Preview:
DESCRIPTION
TRANSCRIPT
The Lever Lab/Page 2
The Graph
• You will need a piece of blank graph paper
Setting up the Graph Paper
Everything you see HERE must be on the graph paper.
Neatness counts.
Setting up the Graph PaperEverything you see HERE must be on the graph paper.
Neatness counts.
EF
MA
Plot each LeverPlot EF and MA for each lever
There are 6 levers, there should be 6 plots.
Plot each LeverPlot EF and MA for each lever
MA EF1.0 10.6 N1.7 7.5 N2.5 6.1 N3.4 5.5 N3.7 5.2 N4.5 3.7 N 6 levers
6 plots
Write MA and EF values for each Lever on the graph …IN PEN
MA EF1.0 10.6 N1.7 7.5 N2.5 6.1 N3.4 5.5 N3.7 5.2 N4.5 3.7 N
6 levers6 plots12 values
Draw the CURVED LINE OF BEST FIT
The LBF is a compromise
DO NOT CONNECT THE DOTS
Make your 1st LBF very light then show it to Mr. Gussin
Do not go beyond your last plot
Draw the CURVED LINE OF BEST FITThe LBF is a compromise
DO NOT CONNECT THE DOTS
Make your 1st LBF very light then show it to Mr. Gussin
Do not go beyond your last plot
Do not go beyond your last plot
Draw the CURVED LINE OF BEST FIT
The LBF is a compromise
DO NOT CONNECT THE DOTS
Make your 1st LBF very light then show it to Mr. Gussin
Do not go beyond your last plot
Do not go beyond your last plot
LBF is a compromise
Draw the CURVED LINE OF BEST FIT
The LBF is a compromise
DO NOT CONNECT THE DOTS
Make your 1st LBF very light then show it to Mr. Gussin
Do not go beyond your last plot
Do not go beyond your last plot
LBF is a compromise
DO NOT CONNECT THE DOTS
Draw the CURVED LINE OF BEST FIT
When done, you need Gussin’s Signature before you can go on to Page 3
top related