· the flexi lite-kit is a low cost innovative solution for floor mounting any type of air...

Centrifugal, tank pump designed to removecondensate water from air conditioners, refrigeration equipment, gas boilers and de-humidifiers.

Engineered with contractor input and LittleGiant quality, the NXTGen™ is designed to outsmart, outlast and out-perform all other condensate pumps.

• 1/4-turn, easy service check valve (both 3/8" and 1/4" supplied with pump.)• Patent-pending cooling design extends life.• External test/run switch.• Rubber feet to absorb vibration.• Slimmer footprint offers flexibility in tight spaces.• Removable high level alarm switch.• 2 year warranty.

“ “

Little Giant tank pumps are also available for removingcondensate from condensing boilers - for guidanceplease ask for a copy of our Boiler Condensate Guide

“ “

....I’ve been buying the Little Giant VCC-20S tank pumps for more than 18 years and won’tuse any other brand. - Contractor in Stockport.

“ “

With nearly 10 years of highly-successful operation in the UK a/c market, the popular EC-400 mini condensate pump has proven reliability. The pump can be installed within an air handler, inside trunking conduit or up to 1m above the air handler in a ceilingvoid, and is ideal for wall-mounted units.

• Versatile.• Ideal for wall-mounted, ceiling and fan coil split a/c’s.• 12 month warranty.

This strong, silent mini condensate pump from Little Giant incorporates several unique features,such as patent-pending cooling technology. Installed adjacent to an air handler, it can bemaintained without disturbing any part of the a/csystem.

• Easy-to-install mounting brackets.• Low-noise start-up and operation.• Easy to service without removing from the wall or disturbing any part of the a/c system.• Ideal for wall-mounted, ceiling and fan coil split a/c’s.• 12 month warranty.

....It’s a lot quieter than I expected. A lotquieter than the other pumps I’ve used.- Contractor in East Midlands.

“ “

TPR

TPT

At only 76mm high, the low profile, stainlesssteel construction of these pumps makes them ideal for removing condensate waterfrom cold-produce retail displays.

The DCP-30A & DCP-30E are horizontallymounted models, designed to fit under the lowest of display cabinets. The DCP-30Vmounts vertically, either behind a refrigerateddisplay cabinet or on a ‘cold room’ wall.

• Only 76mm high - fits under even the lowest display cabinets.• Barbed hose tail - for easy connection of 1/2" drain hose.• Multiple inlet options (top, end or side).• Power and alarm cables pre-fitted.• High discharge head & flow rate -suitable for most applications.• Ideal for cold produce display cabinets in supermarkets and convenience stores.• IP 44 rated sealed electric box.• 12 month warranty.

18

CE-D-70 / CE-D-105

SPIRIT LEVEL

CANTILEVER ARMS: These ready-made, hot dipped galvanised steel cantilever arms with 14mm diameter holes offer a quick and easy method of supporting condensing units on external walls.

Available in a straight length and webbed versionin a variety of lengths. The strut dimensions are41mm x 41mm x 2.5mm.

The flexi Lite-Kit is a low cost innovative solution for floor mounting any type of air conditioning equipment and air source heat pump. This method to floor mounting avoids the high cost and time consuming method of constructing a concrete slab.

Our solution can be delivered to site with minimum ground work preparation. It can be assembled in minutes and provides an external fixing point with built in anti-vibration characteristics to suit all sizes and brands ofair conditioning units and domestic air source heat pumps.

• Low cost and rapid installation time.• Easy to transport and locate.• Safe Working Load 600kg.• Simple steps to construct.

1. Measure 50mm from each end and drill a 9mm hole through the foot.

2. Position the light weight slab in therequired location of the ASHP unit.

3. Position both feet on the lightweight slabto match the pitch of ASHP feet.

5. Insert all four base plates through the lightweight slab.

6. Once all base plates are locatedreposition the lightweight slab. 7. Place both feet the threads. 8. Secure the feet with nuts & washers

& position the spring nuts in the strut. 9. The Flexi Light-Kit is complete andready for the ASHP unit to be fitted.

4. Once positioned drill straight through the foot and into the lightweight slab.

Simple steps to construction

Add flexi EXTENDER-FRAMES as required to create your own bespoke system. Any number can be added in any direction to make a system of any size. This can either be done during the initial installation or for future extension of the system.

flexi Foot - with Strut These feet can be used to support small pipework, runs of cable tray or as an alternative to supportingoutdoor condensing units, air source heat pumps and a variety of outdoor equipment.

They can also be used to support both solar thermal and solar photovoltaic on flat roof installations.

The flexi foot with strut comes in four sizes:

• Sizes: 250mm, 400mm, 600mm & 1000mm.• Made from heavy duty recycled rubber.• 21mm x 41mm galvanised steel strut is supplied bonded to the rubber.• Drain slots moulded to underside of foot.

The flexi foot universal has three M10 inserts offering flexibility to support small pipework,runs of cable tray, air source heat pumpsand a variety of outdoor equipment.

The installer is free to bolt their own strut of various lengths to suit any installation from 500 mm to 3000 mm in length.

These can be used to support both solar thermal and solar photovoltaic on flat roof installations.

• One size - 250mm.• Made from heavy duty recycled rubber.• Three M10 inserts set into the mould.• Drain slots moulded to underside of foot.• For solar thermal & PV installations.

Specify - 1 x PH-HF

Now available in 6 metre and 30 metre coils. This reinforced pvc hose is suitable for condensate drains and comes packaged in clear shrink-wrap for protection and easy storage.

Black reinforced pvc hose has no light penetration, preventing build up of mould growth.

Applications include air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflows.

Available in 30 & 15 metre coils the clear vinyl hose comes ready packed in a box making it easier for use and storage.

SQUEEZY~FIT: Supports a pair of flow andreturn insulated copper air conditioning pipeson either M8 or M10 threaded rod.

By simply squeezing the tips together, thespring steel rod hanger can be fitted or adjusted in seconds, even after the refrigerantpipes have been installed.

• Instant fitting and adjustment.• Folding lock-tab secures pipes into strap.• Black zinc coating matches insulation colour and offers corrosion resistance.

FLOW & RETURN CLAMPS: Asymmetricdesign provides a perfect fit for any one offour pairs of flow and return insulatedrefrigerant pipes. An 8mm clearance holeallows the clamp to be fixed directly to any flat surface, such as a wall or ceiling.

• Folding lock-tab secures pipes into strap.• Black zinc coating matches insulation colour and offers corrosion resistance.

TRH-2

....I was up a ladder, with only one hand free, and these clamps were still easy to fit.. - Contractor in London.

“ “

FRC-2

Fan Motors / Tangential Fan Motors

1-METREPOWERCORD

Fan Motor

Fan Blade

Fan Ring

Fan GuardFan Bracket

a

b

cd

Pro Range

G2G Range

Power Sprayer

AENERGY

EFFICIENCY

12,0

00 B

tu c

oolin

g ca

paci

ty

Reve

rse

cycl

e he

at p

ump

Part Code Description Height Depth Width Weight Hose Length Refrigerant Cooling

Area

MP-1N-12CR Portable AC Cool 812 mm 419 mm 490 mm 35 kg 1.5 m R410A 18-26m²

MPM5-14HR Portable AC Heat / Cool 845 mm 403 mm 480 mm 38 kg 1.5m R410A 18-26m²

High Low

Part Code Description Cooling Capacity

Heating Capacity

Cooling Watts

Heating Watts

Air Flow Volume dB(A) dB(A)

MP-1N-12CR Portable AC Cool 12000 Btu N/A 1300W N/A 520 m³/h 55 49

MPM5-14HR Portable AC Heat / Cool 13000 Btu 10000 Btu 1455W 1040W 520 m³/h 55 49

UNIVERSAL REMOTE CONTROLLER:The UNI-CON universal a/c remote controller is compatible with units from all major air conditioning manufacturers. This easy-to-use, time saving tool is perfect for maintaining and servicing any air conditioning unit.

Part Code Description

KT-1000 Universal UNI-CON Remote a/c controller NEW

NEW

NEW