the file catalog system at flash: a tutorial · the file catalog system at flash: a tutorial...
Post on 01-Jun-2020
2 Views
Preview:
TRANSCRIPT
The File Catalog System at FLASH:a tutorial
Jürgen Maass (MCS4) and Pedro Castro (MPY)
in collaboration with:K. Rehlich, R. Kammering, O. Hensler, E. Sombrowski, S. Herband other people from MCS 1 and MCS 4
Catalogof filesSaveRestore Sequencer
Scale Magnetswith Energy
Print MainParameters (special for FLASH)
Catalogof filesSaveRestore Sequencer
Scale Magnetswith Energy
old “Save & Restore”directory files
Print MainParameters (special for FLASH)
old matlab “print_status.m”
Catalogof filesSaveRestore Sequencer
Scale Magnetswith Energy
old “Save & Restore”directory files
Print MainParameters (special for FLASH)
old matlab “print_status.m”
1)
“old” vs “new” Save & Restore tools
versus
“old” vs “new” Save & Restore tools
versus
new version in Java:
beta version
starts very slow
To start the programs:
name actual value reference value
actual value reference valuename
full address device value file value
actual value reference valuename
full address device value file value
Extras:
actual value reference valuename
full address device value file value
Extras:
difference
Extras:facility device location property
Extras:facility device location property
all columns can be sorted
countersactions
countersactions
Difference ! Selecting items
select items as in EXCEL:multiple selectionswith “shift” and “control”
select items one by one
Open/Save/Print
“Central file“: is a file repository“CSV“: “comma-separated values” formatnew version can read old Save&Restore format
Difference ! file format
XML formal3-column format
Less used features:insert new address
Less used features: insert new address
More extras (for magnet power supplies):Set-Points diff.(SP-SP) RBV diff.(SP-RBV)
More extras (for magnet power supplies):Set-Points diff.(SP-SP) RBV diff.(SP-RBV)
More extras:
More extras:
‘write’ flag
More extras: ‘write’ flag
‘write’ flag
Catalogof filesSaveRestore Sequencer
Scale Magnetswith Energy
old “Save & Restore”directory files
Print MainParameters (special for FLASH)
old matlab “print_status.m”
2)
2) list of files:which one is good?
which wavelength? how much SASE?
for bypass or for SASE?
taken with beam?
or
search in e-logbook(good luck!)
2) catalog of files:
beamlinewavelength how much SASE
2) catalog of files: how to search: using the filters
2) catalog of files: save a new file + print main parameters
2) catalog of files:
print main parametersonly for FLASH
saves magnetsin Save&Restore files
saves orbit forOrbit Display program
2) catalog of files: click on right mouse button
2) catalog of files: click on right mouse button
2) catalog of files: view file in SaveRestore
systems ‘show’ level
‘write’ flag
2) catalog of files: view file in SaveRestore
‘write’ flag
2) catalog of files: compare two files
3. click ‘compare’2. click on right mouse button
1. select a file
2) catalog of files: compare two files
value from file 1 value from file 2
2) catalog of files: scale magnets with energy:
it creates a new file:ONLY with magnets
enter new wavelength
2) catalog of files: scale magnets with energy:present RF values
file values your input values
2) catalog of files: edit catalog entry:
File typetemp file: for temporary data or scratch data or data was edited/changed
(beam is off or some systems are off)normal file: there is beam (good transmission)reference file: official file for routine operation
(a coordinator recommends the use of this file)
special file: special settings for machine studies, tests, etc.
optics file: values calculated from optics programs
2) catalog of files: remove/recover
to see deleted files
2) catalog of files: remove/recover to recover this file
Catalogof filesSaveRestore Sequencer
Scale Magnetswith Energy
old “Save & Restore”directory files
Print MainParameters (special for FLASH)
old matlab “print_status.m”
3)
3) sequencer: list of sequences:
3) sequencercontrol buttons: start/pause/stop
each step:- will restore ‘something’- will check ‘something’ if ok, go to next step
3) sequencer: how to see what it does:expert buttons: “list to restore”, “list to check”
3) sequencer: how to restore a file
1. select a file
2. push button ‘restore’
3) sequencer: how to restore a filesequence: restore + cycling3. push button ‘start’
Thank you for your attention
pedro.castro@desy.de
top related