the company kovove profily, spol. s...

The company Kovove profily, spol. s r.o. We offer: 1/ We choose for you the optimal roof and wall system from all thin metal based systems with respect to required technical characteristics, price and quality of the building. 2/ We calculate the static of your roof or wall, we optimize your construction. 3/ We save your buildings costs. 4/ We supply the material, we make the drawings for roof and walls, we train your building staff, we help with chief-montage.

Ing. Zbyněk Vitošek manager Kovové profily, spol. s r.o.

www.kovprof.cz

Advantages of cooperation with Kovove profily

About the company Kovove profily – company policy

• Even that our company offers technical service before and after the contract , we deliver our products customers in price level of producers.

We guide ourselves to be a professional contact for our customers, pointing out customer's needs with longterm positive relations and never let them "aground“.

The business strategy rests in a focus on customer's needs.

Large technical service (statistical calculations, drawings, removal or replacement of complicated building details etc.).

The shortest delivery terms.

We would like to give you here the information about:

Different types of wall and roof systems based on thin metal profiles, their characteristicts and the border of their using

and New trends in materials, technologies for anti-corossion protection of roof and wall profiles

The target of the presentation

Types of wall and roofsystems based on thin metal profiles 1.Systems without thermal isolation •Trapezoidal profiles •Sinusoidal (waves) profiles •Siding – facade lamellas •Large facade cassettes •ACM plates – bonds 2.Systéms with integrated thermal isulation •Trays (C- lines) Kazetové stěny •Sandwich panels

Delivered facade and roof systems

PROTECTROOF®

Světlopropustné systémy Danpalon

• Possible: Mikrocell insulated 8-35 mm or 4 mm simple plates Conpact

Trapezoidal profiles Waves profiles

Facade lamelas – siding C-lines walls

Komposit plates – bond

Wallsystems without thermal isolation

www.kovprof.cz

Trapesoidal profiles:

We choose for you the optimal profil according to your construction, necessary guaranty and price. We reduce your costs.

A lot of types and designs, various materials, coatings, colours… Perforated –profiles, acoustic profiles Combined with concrete structures Curved profiles, design profiles (Welltec, Montana, SAB,) for interior

and exterior Fire-resistant trapezoidal constructions untill the span of 7,5 m!!! The cheapest wall systém for longlife maintenance-free lifespans,

the cheapest system for thermal weatherproorfing The key for economical using is the optimal choice of the profiles

We offer for you:

OBI - Praha

Airport Hamburk

SCONTO - Praha

GLOBUS - Olomouc

Sample of using of trapezoidal profiles 1

DANPALON – polycarbonat systems

DANPALON – polykarbonátové systémy DANPATHERM – Stěnové panely

Integrované LED v panelu Danpatherm

Systém Danpalon – Danpatherm

Trapezoidal profiles

Trapezoidal profiles – contruction profiles

For roofs and walls, in the height of the profiles from 6 to 200 mm. Produced from galvanised and coil-coating painted steel. Tab. 1 – Standard construction profiles – the part of sortiment

Design trapezoidal profiles

Sample of using of trapezoidal profiles 2

Trapézové profily – designové

MONTAFORM Design

ST. JOSEF FOUNDATION (CH)

MONTAFORM Design

ST. JOSEF FOUNDATION (CH)

MONTAFORM Design

Widmi Housing, Lenzburg (CH)

MONTAFORM design

Alternativa k „běžným „ trapézovým profilům design / příznivá cena Skryté kotvení 6 druhů plné nebo částečné perforace Kombinace různých barev na jednom profilu

MONTAFORM Design

Riedepark, Zug (CH)

MONTAFORM Design

Autobusové depo, GRUTZEFELD(CH)

Sample of using perforated trapezoid sheets

Perforated trapezoidal and waves profiles

Sample of using with perofated waves profiles

Sample of using with perofated trapezoid pr.

Special custom perforation

Special custom perforation 2

Realization with perforated sheets

Teapeutické centrum Rakousko

AL profiles tl. 1-,2 - 3 mm, eloxated

Parkovací dům - Švýcarsko

Obchodní centrum - Německo

For faccades, produced from galvanized and painted steel of alu. Delivered in the high of the profiles 18 till 55 mm.

Sample of using

Sinusoidal profiles (waves profiles)

Sipral – sídlo firmy

Agromex – Čestlice

Sample of using with waves profiles

HADOVKA – OFFICE PARK – Praha

RENAULT - Praha

Facade lamelas - siding

Hoffmann

Facade lamelas - siding

Advantages of facade lamelas: Machinely roll – production, good design and quality with low price Without the risk of unregulary unevenness until the module of 400 mm The possibility of the delivery long and short profiles also with forehead banding –

better rigidity of the plate and less risk of waves

Disadvantages of facade lamelas : For even desing is necessary the an absolute level of supporting contruction Better the thickness minimal 1,00 mm, otherwise there is a big risk of non-ideal

flatness of the facade Maximal recommended module of 400 mm

INTERSPAR – Mladá Boleslav

Sample of using of facade lamelas

Facade cassettes

Advantages: Large formats, custom production quadrat or rhomboid forms Partly hand-production, partly machine production More systems KP-FORM+ production in Prague, Liberta – production in

Finland, Alumetal – production in Italy, aj.) Intermediate stage between facade lamelas-siding and composit plates. Optimal for high buildings with required fire-resistance facade Disadvantages: It is necessary to have absolutely flat supporting construction, correct

drawings and assembly staff having in order to eliminate the efect of thermal expansivity of the material. Minimal thickness of 1,0 or 1,25 mm by steel, better 1,5 mm, by Aluminium 2 or 3mm

module typical 400-800 mm, length max. 3000 mm, otherwise it is necessary to use special alloy

Facade cassettes

Many production and qualities – highly reccomended to prescribe the alloy, thickness of the plates and sheets, type of core and type and thickness of event. painting

Composit panels consist of two mainly (but not only – by Alpolic also other metals..) aluminium sheets connected by the core in thickness of 2-6 mm

Optimal for a large representative facade walls of all types of buidlings Fire-resistance from F-D (types with polyethylen core - PE), B (types „fr“) and A2 Composit plates not only with aluminum sheets, but by for ex. Mitsubishi production of

Alpolic also with natural metals as Titanium, Inox-steel, copper or zinc). Lightweight – Lighter than solid metals of equivalent rigidity There are more panels with class B, it means core „fr“, but ac. CSN you can use core

„B“ for the building higher than 12m only if the material passed the test according the normČSN ISO 13785-1. In this case is the wall-construction taken as DP1

Aluminum

Top coating Lumiflon based Fluoropolymer

Core material; Polyethylene or Non-combustible mineral filled

Composit panels – „bond“ systems

The only anti-grafitti coat SARAN NANO – technically cannot be painted over.

Sample of using composit plates - bond

Alpolic SCM

Alpolic TCM

Composite panels ALPOLIC

Mitsubishi Plastics, Inc. Japan Od 2. Q. 2014 – i Wiesbaden (DE) Core fr or A2 – maximum width 2 ,015m Composite plates with coating Al – ACM

OR WITH COAT FROM NATURAL METAL (TITAN - TCM, NEREZ - SCM, COPPER - CCM, ZINC - ZCM)

Can be coated with eloxated aluminium realAnodized (not anodized „Look“)

ALPOLIC/fr in class B passed ČSN ISO 13785-1 test – lintel above the window; can be used for facades of height of 12 to 22,5 m with DP1 requirement

12 m – 4. floor, 22,5m - 6. floor Citi Green Court Praha 4

ALPOLIC kompozitní panely – garance kvality

Luxemburg Plaza, Praha

Dimensions: Panel thickness 3, 4 a 6 mm Panel thickness 965, 1235,1270, 1275,

1540 a 1575 mm From 1000 m2 variable thickness 800 up

to 2050 mm Maximum length 7200 mm *

ALPOLIC – kompozitní panely

Characteristics Panel weight fr core – 7,6 kg/m2 Panel weight A2 core – 8,1 kg/m2 Panel width 4 mm corresponds to

strength of 3,3 mm AL Alloy AL 3105-H14

Aluminum

Exterior Lumiflon ( Fluoropolymer )

Inflammable mineral core

Protective coat (Lumiflon/PVDF)

Standard finish LUMIFLON (Feve) SURFACE ADVANTAGES LUMIFLON: Selection of gloss from 15 to 80 % without price change Paintwork warranty up to 20 years Any shade from 100 m2 or decor from 500 m2 Minimum paint thickness (always 3-layer): Solid colors – 30 µm Metalic, Prismatic, Sparkling – 28 µm Naturart colors – 40 µm

ALPOLIC – composite panels

Alpolic/fr , Austrálie

LUMIFLON – applicable cold from 5° C

ie. corrective colors

ALPOLIC – composite panels - applications

Selected projects of the Czech Republic Airport Prague Ruzyne Terminal 2 – 25000 m2 Radio Svobodná Evropa Hagibor –

5000 m2 Vienna Point II Brno – 5700 m2

Ostrava Aula – 4800 m2 City Tower Praha – 4000 m2 VUT Brno – 3000 m2 City Green Court Praha – 3000 m2 BB Delta Praha – 3000 m2 IVG Evropská, Praha – 5000 m2 Brno Masarykova univerzita – 3700 m2 …and more at www.metalartcz.cz

LUMIFLON – FEVE – POSSIBILITIES OF USE

Lumiflon (Feve) other applications: Steel constructions Concrete Laminate As a final layer of other surfaces

(ie.PVDF) to achieve glossiness

Lumiflon – paint life min. 60 let

Tokiwa bridge , Japonsko

ALPOLIC – copper (CCM)

University of New Mexico

ALPOLIC – titan (TCM)

Taipei Arena

Alpolic reAL anodised - anodized aluminum housing - Excellent corrosion protection - Very long life - Up to 25 years paintwork warranty - Anodized layer suitable for very sharp bends - Large selection of shades and glosses: Bronze light to almost black Gold, copper, zinc shades Natural elox Cut decors C-brite - mirror effect Antigrafitti – Can be washed from coating

Vila, HOVE (Be) C-brite

reAL anodised sheath of anodised aluminum FR (b-s1, d0) or A2 core (a2-s1, d0) Basic shades from 1000 m2 (smaller quantities on request

according to stock): NATURAL MILL; NATURAL BRUSHED; GOLD 40 MILL; BRONZE 20 MILL; COPPER 50 MILL; BRONZE 80 BRUSHED; Natural Reflective (matt MIRROR)

ALPOLIC – composite panels

ALPOLIC realANODIZED Louvre lens (Fr) C-brite

Elterly Home, (Nl) Gold 10

Real Anodized Alpolic A2 Example of use on the facade of an office building

Examples of fixing method - PINS

Composite panels

ALPOLIC – Composite panels - application

Alpolic/fr Brushed Aluminium Midium, Turecko Bratislava, Slovensko, Dubravia

Alpolic/fr Prismatic RED,Mexico Alpolic CCM ,Mexico

Alpolic/fr Marina Bay, Singapore

Treatment - Standard tools and machines for

aluminum and wood - Ideal CNC machines Curved bending (fr core radius from 150

mm / A2 core radius from 600 mm) - Can be rounded, perforated,

embossed - The panel must always be machined

from all sides - Most often processed into cassettes -

you need to subtract 45 mm from each side of the board size for maximum cassette size

- Substructure for assembly of composite panels must allow for dilatation of elements (3 axes)

ALPOLIC – Composite panels

Alpolic/fr perforovaný či embosovaný

Composite panels DOLUFLEX - CELOKOVOVÉ

DOLUFLEX all-metal sandwich composite panel, casing of two usually aluminum lacquered or anodized plates (also as a mirror), possibly also galvanized or stainless steel, connected by trapezoidal profile, which forms the core of the panels. The surface is powder coated, anodized, enamel, wood, stone or antibacterial plastic. Interior and exterior. High rigidity, non-flammability and variability

Composite panels DOLUFLEX - CELOKOVOVÉ

DOLUFLEX Cantilever roofs, facades, large ceilings, cladding of columns, interiors, manufacture of furniture and elements for interiors and design. Suitable for medical halls and equipment Also acoustic design PHONOFLEX

DOLUFLEX realization

DOLUFLEX – all-metal composite panels

Facade boards ALULIFE

ALULIFE cladding boards for interior and exterior matt or shiny. 19 colors, thickness 2,5 and 5 mm. Anodized aluminum. Unique brushed surface.

Seamless profiles

BEMO seamless screw systems for cladding roofs and walls

Záhřeb Airport

Seamless profiles

BEMO – basic principle of sheath systems made of seamless screw profiles:

Concealed and sliding mount - Without screws in outer sheath - Without screws in outer sheath - Individual shapes - Infinite lengths and different widths

For low pitched roofs

BEMO systems - conditions for

use as a roof covering: Minimum slope1.5 ° (2.6%) For roof strips without horizontal connection Minimum slope 2.9 ° (5%) For roof strips with horizontal connections or roof penetrations

Special

Minimum slope 0.6 ° (1%) Using

groove seal

Only after 3D-Scan roof

cladding and special details

have been designed

Seamless profiles

BEMO Monro profiles conical, curved, oblique and special:

Seamless profiles

BEMO seamless screw profiles are prepared at the factory or on site:

Profiling line at the same height as the roof

Bending on construction site

Seamless profiles

BEMO TOP-rail system, roof and facade cladding made of composite panels:

Seamless profiles

BEMO profiles - photovoltaics:

Without drilling, without

breaking the sheath, safe.

Flexible system

for different

panel sizes and

Seamless profiles

Garland Conference Center - USA

Seamless profiles

Detroit Midfield Terminal - USA

Seamless profiles

JGL Rijeka

Sandwich panels

C-lines walls

Wall systems with thermal isolation

www.kovprof.cz

Types and characteristics of sandwich panels

Selection of the sandwich panels core-insulation material

POLYSTYREN (without fire-resistance, aging of the material) PUR (the best isolation, stable, fire-resistance untill 15 min.) PIR (technical characteristics like PUR, but reduced combustibility, fire-resistance untill 30-60min.) MINERÁLNÍ VLNA (mineral wool), good insulation together with excellent fire-resistance, acoustic resistance untill 32dB. Accoustics panels for noise-absorption – not for exterior, but excellent inside noice reduction Special panels: Agropanels for animal husbandry, single-sheet panels Agro - plastic sheath instead of sheet metal or coated with increased corrosion resistance (Colorcoat HP200 Ultra)

Possible profilation Sandwich panels

PANASONIC - Plzeň

Würth – Mladá Boleslav

Sandwich panels

Horizontaly or vertically cladding. Smooth surface finish. Simple connection. Sound insulation 26dB – PIR or 32dB mineralw.

Advantages of sandwich panels +++!

Easy and quick installation – one piece, lightweight Excellent thermal insulaton properties, visible or invisible installation Guaranted fire-resistance untill 180 min (mineral wool) Choice of many designs and corematerials: PUR, PIR, mineral wool Disadvantages of sandwich panels---! Relatively low load capacity can increase the costs of the construction of the building, espacially for big and tall buildings. Fire-resistance is limited with lower span, usualy until 3-5m, exceptionally untill 6m. Be careful in the fixing of thick panels to concrete construction! Minimal roof inclitanion7 % (=4°)

Sandwich panels + and -

Elektro Bartoš - Frenštát pod Radhoštěm

Sample of using sandwich panels

Special sandwich panels - exterior sheath of ceramic

Sandwich panels - special

Special sandwich panels - exterior sheath of natural stone

Sendvičové panely – speciální

ISOPARSTONE panels - exterior skin of natural stone

Sandwich panels - special

Panels with PUR, PIR and mineral wool Hidden lock Anchoring using stirrups and hanging into the substructure Dimensions 1000 x 3000mm

Typical c-lines wall with verticaly oriented exterior trapezoid sheet

C-lines walls, trays walls

Sample of using of C-lines walls, trays walls 1

Sample of using of C-lines walls, trays walls 2

C-lines walls, trays walls + and -

C-lines walls advantages +++!

Optimal for long span constructions (till 7,5m), essential saving of the cost for supporting construction Advantageous for large buildings – it is possible to „close“ the hall with the cassettes and later go-on with the building-completion Optimal for HIGH industrial, trade and logistic buildings due to possible variability of the thickness of the cassettes, that could increase the load capacity of the wall by the unchanged thickness of the wall Accoustic reduction untill 53 dB U-coefficient untill 0,175 W/m2K-1

Fire-resistance untill 45 min untill the span of 7,5 m!! Free interior of the hall – without purlins or windows-bracing profiles The free choice of external cladding-types (trapezoid sheets, waves sheets, siding, facade cassettes, composit plates, sandwich panels) all with fire-resistance of the complete wall

C-lines walls disadvantages----!

3-steps mounting Typical mounting problem with heat bridges. The typical construction hase by the thickness of the mineral wool insulation inside U-value only 0,59 W/m2K-1

It is necessary to use heat bridge interrupted C-line wall system with distance screws and special insulation removing the thermal bridge between a cassette and a exterior cladding profil. Rockprofil system, KI-KP Duohterm system…) By these systems is the value U= 0,28 with insulation izol. 160 mm a cassette 120/600 or Value U 0,195 with insulation 195 mm and cassette 160/600.

C-lines walls, trays walls + and -

Obr. 1 – Typical C-lines wall

C-lines walls, trays walls - Rockprofilsystem

Cassette walls

C-lines systém Rockprofil Is the only one in Czech Republic C-lines system with interrupted thermal bridge with really done fire-test of the building with all types of exterior thin metall based cladding profiles (trapezoid profiles, waves profiles, facade lamelas - siding, facade cassettes, composit plates or sandwich panels)

C-lines walls, trays walls - Rockprofilsystem

Aluminum extruded facade profiles Cotta

Substitution of the ceramic cladding with solid-aluminium facade system with lower price and lower weight … •Design of ceramic bridge facade based on solid aluminium profile with thickness of 1,8 mm •Weight 6–8 kg/m2

•International guaranty exterior surface Qualicoat •Format 150, 200, 225 a 250 mm •15 standard colours

SARAY COTTA is a new aluminium fassade system that looks like ceramic fassades. SARAY COTTA system consists of vertical supports, aluminium extrusions for panelling, corner joint parts of which angles can be adjusted to suit the building and initial extrusions to commence the installation. Before installation of SARAY COTTA, outside of the building has to be insulated to provide thermal and water tightness. Then vertical supports are mounted with 750-800 mm space between eachother with L brackets. The panel joints are sealed with EPDM to prevent vibration and resonance in a way that air circulates between the panels and the building’s wall. Finishes and colours – by anodising, silver or colour anodised; - by powder coating on aluminium, RAL colour range, clay coloured rough appearance, wood or stone appearance.

Aluminum extruded facade profiles Cotta

Polycarbonat

roof and wall systems

Danpalon

Polycarbonat systems Danpalon

DANPALON systems – types of polycarbonate panels

Honeycomb Multicell Compact DP4

• Solid panel th. 4 mm • 6 standard colors • Fire resistance: b-s1,d0 • Weight 5,14 kg/m2

• A snap-on connector + transparent space profile

• Standard width 592 mm

• Multicell structure • Rectangle • 19 standard colors • Fire resistance: b-s1,d0 • Thickness 8; 10; 12 a 16 mm • Standard width 600 a 1040 mm

• Honeycomb structure • Hexagon • 19 standard colors • Fire resistance : b-s1,d0 • Thickness 8; 10; 12 a 30 mm • Standard width 600; 1000

a 1040 mm

Technical features and dimensions

DANPALON systems Double notching | Microcell structure

Double notching for high-security.

• Unique microcell structure – highest structural mechanical performance on the market

• Soft and hard body impact tested according: D1,10J-M50,300J-M50,400J

DANPALON - polycarbonate systems Light and thermal insulation properties

Light-transmitting systems Danpalon

DANPALON systems Facade

„Classic“ walls •Great utility value / price •All types of the panels •FR: b-s1, d0

Ventilated rainscreen •Aluminium subconstruction •Full accessories •Multicell panels •FR: b-s1,d0

Cassettes wall •High thermal insulation performance •Completly factory assembled

DANPALON systems Facade – Cassette wall

Kazetové systémy K7 / K12 • Fire resistance B-s2,d0 • U value = from 1,2 to 0,39 W/m2K • Light transmission – 19 % to 46 % • Span between supports 3000 mm • Colored and illuminated facades • Extremly quick end easy to install

DANPALON – polycarbonat systems COLOURS

3D lite – harmonisation of solar gain troughout the day Benefits of 3DLite : Astouding 3D light effect, easy installation, large spans, wide range of colors

3D lite standard colors

DANPALON –polycarbonat systems 3D LITE

On all types of the panels applicable. UV resistant printing.

LED lights in DANPALON facade systems.

DANPALON – polycarbonat systems DECORATION: PRINTING – LED LIGHTS

DANPALON - polycarbonate systems for ROOFS Danpalon roof systems - description

Microcell - a system with excellent

thermal insulation properties

- High impact resistance PO : b-s1,d0

Compact - Solid polycarbonate Ideal for shelters eg FREE-UV zones

Controlite - System for automatic regulation of luminous flux to the interior

Light-transmitting systems Danpalon - roofs

DANPALON - polycarbonate systems

Museum Louvre

2 tech-lock - Micro chambers (higher strength) - UV resistant - guaranteed resistance - Softlite - matt surface (diffuse light) - HP - high protection (increased resistance to

mechanical damage and high chemical resistance)

- Non-standard widths - available - INFRARED / R = Low-E - reduces solar heat, IR

radiation without affecting the lights. throughput)

- 19 standard color shades including metallic and iridiscent colors

- WELDING TERMINATION OF BOARDS - 3D LITE - light comfort throughout the day -

passive - CONTROLITE - active light control indoors - Possibility of printing according to the original - Possibility to install LED lighting

Advantages of DANPALON systems

DANPALON - polycarbonate systems ROOFS | FACADES |INTERIORS - Exclusive representation for the Czech and Slovak

Republics - All materials tested for fire according to EN 13501 as Bs1-d0 ČSN 73 0863 and ČSN 73 0865 - Other tests / certificates such as weathering, watertightness, impact resistance, hail resistance, load capacity tables, - 10 Years Warranty - Accessories made of aluminum or polycarbonate

DANPALON - polycarbonate systems Softlite | High protection

Softlite - so-called diffuse light - matte finish provides more light comfort in the interior and prevents glare

HP - High protection finish - Provides increased impact resistance (even on the same spot), aggressive environment and graffitty resistance to all boards

DANPALON ® • Representation exclusivity CZ/SK • Roofs, walls and interiors full

systems • Fire resistance tested according

EN 13501 for all types of panels • Weathering, water penetration,

air infiltration, impact and other tests are available

• Warranty 10 years • Aluminium or transparent

polycarbonate accessories • Small projects available (from 1

Danpal® single-layer application translucent assembly dry process, can be ordered in several types and designs according to the required properties.

Nemocnice, USA

Example: 1-layer Danpal system

VRS - ventilated translucent facade

VRS - Reference

• Zimní stadion Teplice, VRS system

VRS - Reference

DANPALON – polykarbonátové systémy DANPATHERM – Stěnové panely

Integrované LED v panelu Danpatherm

Danpalon system – Danpatherm

Light-transmitting systems Danpalon - roofs

Self-supporting skylights up to 8.5 m span

Controlite - a system with controlled light transmission for both wall and roof

Danpalon system – Controlite

Danpalon systems - an example of use in the roof

Danpalon systems - an example of a wall application

DANPALON - 3D LITE - immobile shading

3D lite - ensures light comfort - Reduces the penetration of light into the interior around noon, while in the morning and evening it transmits more light

3D lite standardní odstíny

Light-transmitting systems Danpalon - 3D lite

DANPALON - polycarbonate systems DANPATHERM - Wall panels

- Wall panels K7 / K12 - Reaction to fire B-s1, d0 - U = from 1,2 to 0,39 W/m2K - Light transmission – 19% až 46% - Support distance 3000 mm - Colorful and illuminated facades - Very fast assembly

Danpalon - Danpatherm system - assembly

DANPALON - polycarbonate systems - K12 Danpatherm assembly

Case Study – Final Result

Blum - Polsko – Final inter.

Danpalon System – Danpatherm

With LED backlight

Vhodné pro sportovní sály

Suitable for sports halls

Suitable for sports facilities

Sports Complex, France

References - sports hall

With exterior print

DANPALON - polycarbonate systems Danpalon roof systems - the basic principle of anchoring

Profiles with corrugated web

WT profiles

The corrugated web profile was developed as an economical substitute for welded or high I-shaped rolled profiles.

WT profiles

Range of products: - thickness 2.0; 2.5 and 3.0 mm (max. 6.0 mm) - height 333, 500, 635, 750, 1000, 1250 and 1500 mm - flange from 120x6 to 450x30 mm web S235 or S355 - flange steel S235, S275 or S355 - the profiles are straight or with variable height from 250 to 1250 mm

WT profiles

Fire resistance of beams and structures made of profiles with corrugated web can be demonstrated by standard calculation in accordance with ČSN EN 1993-1-2 and as a standard can be achieved classification R15 without additional fire protection. This was also demonstrated by testing in PAVUS.

WT profiles

Anti-corrosion protection

• Anticorossion protection of thin metal profiles

• And

• Confidex guaranty the only real long life guaranty

Coating of lightweight profiles

A lot types of metals for cladding, for example stainless steel, especially titan, titanium zinc, copper, mill finish aluminium or coating aluminium, due the high loading capacity and lower price is most used steel with corrosion protection Good ratio between price and use value Most used corrosion protection of the steel is galvanizing (a lot of types ) and duroplastics coating (a lot of types and thicknesses)

UV resistance of different coatings

Confidex Guarantee max. 40 years

For all types of mentioned coating on the top: Colorcoat Prisma 50 my (30 years) Corlorcoat HPS Ultra 200 my (40 years) Direct guarantee from TATA steel to the investor (registration of the building is necessary)

Confidex Colorcoat® Guarantee

Is longest, 100% functionally, guarantee for the coating steel profiles with guarantee up to 40 years for facades and roofs

Covers cut edges for the entirety of the Confidex® Guarantee period

2 guarantees for the all colors

Does not distinguish between different roof pitches down to 1°

Is offered directly to the building owner

Is fully transferable should the building ownership change

Colorcoat HPS200® Ultra

200 µm coating thickness Up to 40 years Confidex® guarantee The color chart - Repertoire® Colour Consultancy for custom colors The embossed trademark for Scintilla® color is easy visible for checking the authenticity of the product Great corrosion protection thanks plating Galvalloy® according ČSN EN 10346:2009 (95 % Zn/5 % Al) with duroplastic coating

Colorcoat® Prisma

Colorcoat Prisma 50 µm coating thickness The best combination of the price, esthetics and long lasting Very good corrosion protection thanks plating Galvalloy® according ČSN EN 10346:2009 (95 % Zn/5 % Al) with duroplastic coating Up to 30 years Confidex® guarantee Excellent abrasion resistance of the coating Great color with long with gloss rentention

The philosophy of our company: Not enforce to one product, one system or one producer, but: To know exactly all the systems and products, and choose the right one for each buildnig, to provide the best aesthetic, economic and long lasting solution.

The philosophy of our company

Key feature – technical support

We provide: Statical calculations and optimization Recommendations of the appropriate cladding type for the investors and architects/engineers The processing and installation drawings and implementation documentation Solutions for difficult or non-standard requirements and details, etc..

Thank you for your attention!

Any questions?

www.kovprof.cz

Ing. Zbyněk Vitošk| m.t.: +420 602 20 355| vitosek@kovprof.cz

the company kovove profily, spol. s...

Documents

the company kovove profily, spol. s r.o. - trapézové...

tpk, spol. s r.o

rosty, profily, konstrukce, plne kryty v

popisbih1981 bilten111 spol dob

analiza finans spol ekonom fundusze

deltalight lighting bible10: světelné profily

spol i rod

hein & spol. - klasik hladkÝ kl...hein & spol.- keramické...

kovové profily sk

isolit–bravo spol. s r.o

sodatsw spol. s r.o

spol. s r.o. - sid

potvrdenie plánu spol. váhostav-sk

cogras spol. s r.o

spol i rod - unizg.hr

„pivo, cigarety, marihuana a spol.“

odborné profily sosireČr

katalog kovove-herni-prvky-alestra

transys, spol. s r.o

olympijskÁ marketingovÁ spoloČnosŤ, spol