the bmr-a series bmr-a specificationscdnedge.vinsolutions.com/.../website_4919/maxon/bmr-a.pdf ·...

COLUMNLIFT® SERIESThe BMR-A Series

Maxon Lift Corp. 11921 Slauson Ave., Santa Fe Springs, CA 90670 800.227.4116 Fax 888.771.7713, www.maxonlift.com

■ Totally Automatic Hydraulic Locking Mechanism eliminates the need for manual locking thus taking the driver out of the equation

■ Newly designed closer arms automatically secure the platform tightly against the back of the truck

■ Concentric rollers allow 400% more bearing surface on the rollers, reducing wear and extending life

■ Undercarriage Mounted Switch is protected from side impacts

■ Fully Automatic Retention Ramp

■ Corrugated Steel Platform Structure design eliminates the problem of waffling. All platform configurations are available in steel and aluminum

■ BMR-A models come with all-new trailer kits, which separate out the trailer portion from the tractor portion

BMR-A SPECIFICATIONS

16”Floor Level

77”

32” Min. 56” Max.

12”

Lift Dimensions and Mounting Requirements

The New BMR-A from Maxon: So many improvements,the A stands for Advanced

Steel Platform Sizes

Estimated Hours to Install: 8 Steel Platform Sizes w/16” Aluminum Retention Ramp

Model Capacity 60” X 80”36” + 24”

72” X 80”42” + 30”

60” X 80”30”+ 30”

72” X 80”36”+ 36”

84” X 80”42”+ 42”

Bed Height Min - Max 38” to 56” 44” to 56” 32” to 56” 38” to 56” 44” to 56”

BMRA-35 3500 lbs Approx.Wt. 1630 lbs 1725 lbs 1615 lbs 1710 lbs 1825 lbs

BMRA-44 4400 lbs Approx.Wt. 1680 lbs 1795 lbs 1665 lbs 1780 lbs 1875 lbs

BMRA-55 5500 lbs Approx.Wt. 1775 lbs 1895 lbs 1761 lbs 1882 lbs 2150 lbs

BMRA-66 6600 lbs Approx.Wt. 1775 lbs 1895 lbs 1761 lbs 1882 lbs 2150 lbs

Aluminum Platform Sizes

Incl. 12” Fixed Ramp Incl. 16” Aluminum Retention Ramp

Model Capacity 60” X 80”36” + 24”

72” X 80”42” + 30”

60” X 80”30”+ 30”

72” X 80”36”+ 36”

84” X 80”42”+ 42”

Bed Height Min - Max 38” to 56” 44” to 56” 32” to 56” 38” to 56” 44” to 56”

BMRA-35 3500 lbs Approx.Wt. 1175 lbs 1195 lbs 1215 lbs 1235 lbs 1305 lbs

BMRA-44 4400 lbs Approx.Wt. 1225 lbs 1245 lbs 1265 lbs 1305 lbs 1355 lbs

BMRA-55 5500 lbs Approx.Wt. 1320 lbs 1367 lbs 1361 lbs 1407 lbs 1630 lbs

BMRA-66 6600 lbs Approx.Wt. 1320 lbs 1367 lbs 1361 lbs 1407 lbs 1630 lbs

BMR-A_M157_F1.5-CV.indd 1 4/15/2014 2:33:40 PM

COLUMNLIFT® SERIESThe BMR-A Series

Maxon Lift Corp. 11921 Slauson Ave., Santa Fe Springs, CA 90670 800.227.4116 Fax 888.771.7713, www.maxonlift.com

M-157-0314

Face Seal ConnectionsCreate a secure hydraulic system by using O-rings at all contact points, greatly reducing the chance of system leaks.

Potted SwitchesKeep out dirt, oil, grime and moisture. Potted Switches eliminate corrosion and premature switch failure.

Optional Features■ Bolt-On Installation Kit

■ Low Voltage Switch (LVS)■ Extruded Aluminum Platform■ Dual Pump & Motor Assembly■ Streetside Control■ Header Kit

See Price Sheet for Complete List of Options

Distributed by:

Roller DesignThe Quick Release Roller Design allows for easy inspection and replacement of roller assemblies.

Wiring HarnessIncludes over molded electrical connectors that are watertight and eliminate corrosion problems.

MAXPRO® Paint or GALVANIZED Finish This patented, Maxon exclusive paint process has a tough polyurea top coat and an AL rich primer that combat corrosion and keep the liftgate looking like new. For even more corrosion protection, the BMR-A is alsoavailable in a galvanized finish.

Bolt-On Installation SolutionThis solution can save both time and money during installation. Welders are not required to complete the installation if brackets are pre-installed. The bolts keep the gate in position while the mounting brackets support the weight of the load and gate.

BMR-A_M157_F1.5-CV.indd 2 4/15/2014 2:33:42 PM