testa presentation
Post on 24-Jul-2016
235 Views
Preview:
DESCRIPTION
TRANSCRIPT
“Company
S.p.a.”
The importance of the last step:
the inspection of the fabric,
the packing of the roll and the quality
Via Crema,8\C – 24050 Zanica (Bg) Italy -Tel. +39 035-670.444
Fax +39 035-670.450 – E mail:info@testa.it – www.testaspa.it
Testa Spa has been
UNI-EN-ISO 9001
attested starting from
1999 and the 95 % of
Testa’s suppliers are
ISO 9000 attested.
Inspection machines:
Packing machines:
Introductions for printing machines: -Reggiani - Stork
- Buser - Zimmer
Our production range
• For raw fabrics
• For finishing
•For rolls
-Simple machinery
-Full automatic machinery
Cutting plan
Introductions for printing machines
1 tirante brace
2 rullo allargatore enlarging roller
3 freno brake
4 rullo folle free roller
5 rullo motorizzato driven roller
6 aspo shaking roller
7 ballerino-compensatore compensator
8 fotocellula photocell
9 ruote per movimentazione wheels for moving
10 dispositivo di centratura centring device
11 tappeto relax fabric relaxing belt
12 entrata da piccolo rotolo comandato input by driven small roll
13 tagliacuce cutting-sewing machine
14
quadro elettrico electrical panel
entrata da grosso rotolo svolgimento assiale
15
input by big roll with axial unwinding
Introductions for printing machines from lap,
small and big driven rolls
Packing machine La Petite
La Petite
The machine allows longitudinal and lateral roll
closing on the same packing station:
longitudinal by thermo fusion welding, lateral
one by thermo retraction.
Plastic winding around the roll is perfectly
sticked, as well as lateral closing.
This machine has a special device, which
reads automatically roll diameter to decide
hot-blowing time and quantity of plastic to
be used.
Packing speed: about 1-1,5 roll per minute.
Packing machine with manual
loading and automatic down-
loading of the roll
Packing machine with rolls
loading by a driven
accumulation table.
Packing machine La Petite
Automatic packing machine La Petite
Fully automatic packing machine La Petite, for rolls coming from line,
equipped with vertical labelling, and tilting devices
Packing machine Speedy 2000 series 1 ÷4
Speedy models to pack up to 3 rolls per minute, mainly indicated for rolls
coming from conveyor line.
•Type of longitudinal closure: by thermo-welding (both La Petite and
Speedy)
Thermo-welding Ultrasonic Clips “Caramel”
closing thermoretractable
system
Difference between La Petite and Speedy
Production: -La Petite about 1-1,5 rolls per minute
-Speedy about 3 rolls per minute
•Type of lateral closures: mod. La Petite only by thermo retractable
system, mod. Speedy by:
This machine allows longitudinal and lateral roll closing by
two different stations: first for longitudinal closure by
thermo fusion welding, lateral one by thermo retraction
closing. Additionally if requested can be integrated in the
middle position with flock cut
Packing machines Spedy 2000 series 1 ÷4
Mod. 111 Basic
Inspection machine with winding unit
behind the operator
Inspecting and rolling machines
Fabric inlets from lap with
motorized relaxing belt or small
driven roll
Mod. 111 Eureka Basic
When packing unit is included
Very compact system
Inspecting, rolling and packing machines
Inspecting – Rolling – Packing machines series Eureka
Mod. 111 Eureka 2
It allows the cutting of the fault, seam or sample in lap.
Fault map is created.
No cut is performed.
Automatic optimalised cutting system
1 Fabric is inspected
Fabric is inspected from big roll
(A-frame) to big roll.
The inspection can be:
•Traditional: with operator •Automatic: with camera
Automatic optimalised cutting system
Result is the fault map
From the fault map data and the user supplied
parameters, the software creates an optimised cutting
plan.
Target of the optimisation is to obtain
the maximum amount of first quality
fabric saving from min. 1,5% up to
max. 3% of first choice fabric
2 Optimalization of the cutting system
Automatic optimalised cutting system
Automatic optimised cutting system
The software calculates one or more (similar) cutting solutions,
that are stored in memory.
There is also the possibility to manually modify the cutting plan
3 Automatic execution of the cutting plan
Automatic optimised cutting system
Eureka machines, controlled by computer, are able to wind at 300 mt
per min., pack and label the fabric automatically, without any need of
operators , carrying out the cutting plan previously processed during the
optimization stage.
We are sure that our machines will meet your complete
approval.
Thank you for your attention
Testa s.p.a
Bukit Cimanggu City Blok G3 No. 6, Bogor 16166 – Indonesia
Phone : +62 251 7536 757
Fax : +62 251 7536 744
Email : dharmatek@tracsworld.com
top related