tesmec gallmac catalogue 2013 en machines rev01
Post on 07-May-2017
250 Views
Preview:
TRANSCRIPT
MACHINES
10%
R 1375
2300
1860
2880
4606
±560
R 1375
34°
250
393
178
215
±865
215
2270 1115
±300
3
±4909
±1524
010Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.335664
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Wheeled Multifunction MachineTG10
Gallmac machines are building site service vehicles specially designed for maximum effi ciency in areas where space is limited such as town centers, along one-lane roads, or on work sites with limited maneuverability.The extreme versatility allows on-site work to be performed using just one machine instead of several single purpose equipment.The turret of the machine has 360° stepless rotation and remains within the overall dimensions of the machine when outriggers are in working conditions. The articulated boom’s lateral digging ability is also used to enhance tool changing capacity, and the quick connect/disconnect hydraulic couplings enable quick power tool changing.
Confi gurationSeat with mechanical suspensionStabilizing / leveling bladeLoad sensing proportional valves for simultaneous movementsSafety valves on all cylinders to prevent boom falls2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steeringSwinging rear axles provided with 45% self-locking differentialSwinging rear axle blocking deviceHydraulic wet disc brake with 4 friction platesParking brakes spring apply and automatic hydraulic releaseCab with Rops and Fops structureOverload buzzerBackward drive buzzerIndependent oil fi red heating system (4 kW)Side excavating hydraulic system 35° left - 25° rightBucket link with lifting hook (5 ton)Manual Centralized greasing (n° 4 points)1° Auxiliary hydraulic line with quick couplingsVertical exhaust dischargeTires 16/70- R20Quick hydraulic coupling for equipment replacement
PerformanceTraction force 5700 daNMax speed 30 km/hMax fl ow (arm mov. circuit) 156 l/minPressure (arm mov. circuit) 270 bar
Hydraulic TransmissionClosed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and “automotive” adjustment.Open hydraulic circuit with load sensing adjustment.
CharacteristicsMax height 3003 mmMax width 2300 mm Max length 4909 mmMass 9600 kg
EngineDiesel 74.5 kW (100 hp)Cooling system waterElectrical system 12 V
Note: the max speed may change according to tires and confi guration
010
0
(m)
1234567
0
1
2
3
4
5
6
7
8
-1
-2
-3
-4
(m)
R 889 (mm)
45°
45°
0
(m)
1234567
0
1
2
3
4
5
6
7
8
-1
-2
-3
-4
(m)
8
R 1255 (mm)
0
(m)
124567
0
1
2
3
4
5
6
7
8
-1
-2
-3
(m)
2000
Kg
1500
Kg
900
Kg
0
(m)
124567
0
1
2
3
4
5
6
7
8
-1
-2
-3
(m)
3
3200
Kg
2500
Kg
2000
Kg
1650
Kg
1300
Kg
Keep you updated on: www.tesmec.comISO 9001:2008
Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Wheeled Multifunction MachineTG10
Working diagrams
Loading diagrams
Additional Devices
ALL012 Seat with pneumatic suspensionALL032 Stabilizing/leveling blade with
stabilizersALL033 Front StabilizerALL034 Stabilizing/leveling blade with forks
supportALL035 Stabilizing/leveling blade with
stabilizers and forks supportALL036 “Greader” Blade ±20°ALL042 Tires 18 x 19.5ALL043 Tires 425/75-R20ALL052 Front axle with 45% self-locking
differentialALL062 Adjustable Bucket linkALL063 Adjustable Bucket link with lifting
hookALL072 Automatic greasing for turretALL082 Air conditioning systemALL092 2° and 3° arm synchronizationALL093 Pedal to Lever Inversion control ALL102 2° Auxiliary hydraulic lineALL112 Working brakeALL132 Working elevating platformOPT001 Central outriggersOPT003 Engine case protectionOPT004 Fuel charge pumpOPT005 Kit mudguardsOPT006 Radio/cd/mp3 PlayerOPT007 Radio/cd/mp3 Player + USB and
bluetoothOPT009 Directional drill/ mixing bucket
predispositionOPT010 Highlight led beacon (not for road
circulation)OPT011 Led Working lightOPT012 Auxiliary hydraulic line for hammer
return
10%
3064
R 1450
4871
1860
2340
±560
R 1450
37°
250
375
175
200
±875
200
2350 1025
±303
5
±4980
±1605
020Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.335664
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Wheeled Multifunction Machine TG12
Confi gurationSeat with mechanical suspensionStabilizing / leveling bladeLoad sensing proportional valves for simultaneous movementsSafety valves on all cylinders to prevent boom falls2 speed gear boxes2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steeringSwinging rear axles provided with 45% self-locking differentialSwinging rear axle blocking deviceHydraulic wet disc brake with 4 friction platesParking brakes spring apply and automatic hydraulic releaseCab with Rops and Fops structureOverload buzzerBackward drive buzzerIndependent oil fi red heating system (4 kW)Side excavating hydraulic system 35° left - 25° rightBucket link with lifting hook (5 ton)Manual Centralized greasing (n° 4 points)1° Auxiliary hydraulic line with quick couplingsVertical exhaust dischargeTires 16/70- R20Quick hydraulic coupling for equipment replacement
PerformanceTraction force 7700 daNMax speed 32 km/hMax fl ow (arm mov. circuit) 156 l/minPressure (arm mov. circuit) 285 bar
Hydraulic TransmissionClosed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and “automotive” adjustment.Open hydraulic circuit with load sensing adjustment.
CharacteristicsMax height 3035 mmMax width 2340 mm Max length 4980 mmMass 11000 kg
EngineDiesel 74.5 kW (100 hp)Cooling system waterElectrical system 12 V
Note: the max speed may change according to tires and confi guration
Gallmac machines are building site service vehicles specially designed for maximum effi ciency in areas where space is limited such as town centers, along one-lane roads, or on work sites with limited maneuverability.The extreme versatility allows on-site work to be performed using just one machine instead of several single purpose equipment.The turret of the machine has 360° stepless rotation and remains within the overall dimensions of the machine when outriggers are in working conditions. The articulated boom’s lateral digging ability is also used to enhance tool changing capacity, and the quick connect/disconnect hydraulic couplings enable quick power tool changing.
020
0(m)
1234567
0
1
2
3
4
5
6
7
8
-1
-2
-3
-4
(m)
45°
45°
R 924 (mm)
0(m)
1234567
0
1
2
3
4
5
6
7
8
-1
-2
-3
-4
(m)
8
R 1284 (mm)
0(m)
124567
0
1
2
3
4
5
6
7
8
-1
-2
-3
(m)
3000
Kg25
00 K
g
2200
Kg
1300
Kg
2000
Kg
0(m)
124567
0
1
2
3
4
5
6
7
8
-1
-2
-3
(m)
4000
Kg
3000
Kg
2500
Kg
2000
Kg
Keep you updated on: www.tesmec.comISO 9001:2008
Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Wheeled Multifunction Machine TG12
Working diagrams
Loading diagrams
Additional Devices
ALL012 Seat with pneumatic suspensionALL032 Stabilizing/leveling blade with
stabilizersALL033 Front StabilizerALL034 Stabilizing/leveling blade with forks
supportALL035 Stabilizing/leveling blade with
stabilizers and forks supportALL036 “Greader” Blade ±20°ALL042 Tires 18 x 19.5ALL043 Tires 425/75-R20ALL052 Front axle with 45% self-locking
differentialALL062 Adjustable Bucket linkALL063 Adjustable Bucket link with lifting
hookALL072 Automatic greasing for turretALL082 Air conditioning systemALL092 2° and 3° arm synchronizationALL093 Pedal to Lever Inversion control ALL102 2° Auxiliary hydraulic lineALL112 Working brakeALL132 Working elevating platformALL133 Trenching deviceOPT001 Central outriggersOPT003 Engine case protectionOPT004 Fuel charge pumpOPT005 Kit mudguardsOPT006 Radio/cd/mp3 PlayerOPT007 Radio/cd/mp3 Player + USB and
bluetoothOPT009 Directional drill/ mixing bucket
predispositionOPT010 Highlight led beacon (not for road
circulation)OPT011 Led Working lightOPT012 Auxiliary hydraulic line for hammer
return
030
17 18
250
900
1000
4000
Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.335664
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Keep you updated on: www.tesmec.com
ISO 9001:2008
Wheeled Multifunction Machine with Trencher TG12 TRS - Chainsaw
The digging frame consists of a digging chain and a motorized wheel to which are attached a support and drive wheel, the chain saw and the plate with quick coupling. The most important feature is the synchronism of this wheel with the tractor wheels which assures the maximum digging performances.This attachments provides maximum digging capability, thus making the TG12 even more versatile.
Confi gurationSeat with mechanical suspensionStabilizing / leveling bladeCentral stabilizersLoad sensing proportional valves for simultaneous movementsSafety valves on all cylinders to prevent boom falls2 speed gear boxes2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steeringSwinging rear axles provided with 45% self-locking differentialSwinging rear axle blocking deviceHydraulic wet disc brake with 4 friction platesParking brakes spring apply and automatic hydraulic releaseCab with Rops and Fops structureOverload buzzerBackward drive buzzerIndependent oil fi red heating system (4 kW)Side excavating hydraulic system 35° left - 25° rightBucket link with lifting hook (5 ton)Manual Centralized greasing (n° 4 points)1° Auxiliary hydraulic line with quick couplingsVertical exhaust dischargeTires 16/70- R20Quick hydraulic coupling for equipment replacement
PerformanceTraction force 7700 daNMax speed 32 km/hMax fl ow (arm mov. circuit) 156 l/minPressure (arm mov. circuit) 285 bar
Hydraulic TransmissionClosed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and “automotive” adjustment.Open hydraulic circuit with load sensing adjustment.
CharacteristicsMax height 3035 mmMax width 2340 mm Max length 4980 mmMass 11000 kg
EngineDiesel 74.5 kW (100 hp)Cooling system waterElectrical system 12 V
Note: the max speed may change according to tires and confi guration
Digging width 20-35 cmDigging depth 60-120 cm
Trencher PredispositionSecond extra-circuit on boomModifi cations on the hydraulic system to feed the trencherAdditional radiator for hydraulic oilModifi cations on controls to operate the Trencher attachment
040
MA
X 4
00
MAX 120
MAX 3500
Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.335664
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2013
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Wheeled Multifunction Machine with Trencher TG12 TRS - Rocksaw
The digging system consists of a disk and a motorized wheel to which are attached a support and drive wheel, the rock saw and the plate with quick coupling. The most important feature is the synchronism of this wheel with the tractor wheels which assures the maximum digging performances.This is the ideal machine for urban cabling in limited space, and with limited maneuverability.
Confi gurationSeat with mechanical suspensionStabilizing / leveling bladeCentral stabilizersLoad sensing proportional valves for simultaneous movementsSafety valves on all cylinders to prevent boom falls2 speed gear boxes2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steeringSwinging rear axles provided with 45% self-locking differentialSwinging rear axle blocking deviceHydraulic wet disc brake with 4 friction platesParking brakes spring apply and automatic hydraulic releaseCab with Rops and Fops structureOverload buzzerBackward drive buzzerIndependent oil fi red heating system (4 kW)Side excavating hydraulic system 35° left - 25° rightBucket link with lifting hook (5 ton)Manual Centralized greasing (n° 4 points)1° Auxiliary hydraulic line with quick couplingsVertical exhaust dischargeTires 16/70- R20Quick hydraulic coupling for equipment replacement
The minimum digging point from tires side is 1250 mm.
PerformanceTraction force 7700 daNMax speed 32 km/hMax fl ow (arm mov. circuit) 156 l/minPressure (arm mov. circuit) 285 bar
Hydraulic TransmissionClosed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and “automotive” adjustment.Open hydraulic circuit with load sensing adjustment.
CharacteristicsMax height 3035 mmMax width 2340 mm Max length 4980 mmMass 11000 kg
EngineDiesel 74.5 kW (100 hp)Cooling system waterElectrical system 12 V
Note: the max speed may change according to tires and confi guration
Trencher PredispositionSecond extra-circuit on boomModifi cations on the hydraulic system to feed the trencherAdditional radiator for hydraulic oilModifi cations on controls to operate the Trencher attachment
Digging width 7-12 cmDigging depth 40 cm
3350
R 1625
5605
1990
2450
8%
±620
R 1625
35°
250
366
180
186
±952
215
2575 1080
±317
8
±6017
±2365
050Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.335664
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Wheeled Multifunction MachineTG14
Confi gurationSeat with mechanical suspensionStabilizing / leveling bladeLoad sensing proportional valves for simultaneous movementsSafety valves on all cylinders to prevent boom falls2 speed gear boxes2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steeringSwinging rear axles provided with 45% self-locking differentialSwinging rear axle blocking deviceHydraulic wet disc brake with 4 friction platesParking brakes spring apply and automatic hydraulic releaseCab with Rops and Fops structureOverload buzzerBackward drive buzzerIndependent oil fi red heating system (4 kW)Side excavating hydraulic system 30°Bucket link with lifting hook (5 ton)Manual Centralized greasing (n° 4 points)1° Auxiliary hydraulic line with quick couplingsVertical exhaust dischargeTires 18 x 22.5 Quick hydraulic coupling for equipment replacement
PerformanceTraction force 8600 daNMax speed 30 km/hMax fl ow (arm mov. circuit) 198 l/minPressure (arm mov. circuit) 285 bar
Hydraulic TransmissionClosed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and “automotive” adjustment.Open hydraulic circuit with load sensing adjustment.
CharacteristicsMax height 3178 mmMax width 2450 mm Max length 6017 mmMass 14000 kg
EngineDiesel 93.2 kW (125 hp)Cooling system waterElectrical system 12 V
Note: the max speed may change according to tires and confi guration
Gallmac machines are building site service vehicles specially designed for maximum effi ciency in areas where space is limited such as town centers, along one-lane roads, or on work sites with limited maneuverability.The extreme versatility allows on-site work to be performed using just one machine instead of several single purpose equipment.The turret of the machine has 360° stepless rotation and remains within the overall dimensions of the machine when outriggers are in working conditions. The articulated boom’s lateral digging ability is also used to enhance tool changing capacity, and the quick connect/disconnect hydraulic couplings enable quick power tool changing.
050
0
(m)
1234567
-4
8
0
1
2
3
4
5
6
7
9
-1
-2
-3
(m)
8
-5
R 1145 (mm)
56
°
45
°
0
(m)
1234567
-4
8
0
1
2
3
4
5
6
7
9
-1
-2
-3
(m)
8
-5
R 1425 (mm)
-4
0
1
2
3
4
5
6
7
9
-1
-2
-3
(m)
8
0
(m)
12345678
4000
Kg
3500
Kg
2900
Kg
2400
Kg
1700
Kg
2000
Kg
-4
0
1
2
3
4
5
6
7
-1
-2
-3
-50
(m)
1234567
5000
Kg
3600
Kg
3000
Kg
2100
Kg
2500
Kg
Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.335664
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2013
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008
Wheeled Multifunction Machine TG14
Working diagrams
Loading diagrams
Additional Devices
ALL012 Seat with pneumatic suspensionALL032 Stabilizing/leveling blade with
stabilizersALL033 Front StabilizerALL034 Stabilizing/leveling blade with forks
supportALL035 Stabilizing/leveling blade with
stabilizers and forks supportALL036 “Greader” Blade ±20°ALL052 Front axle with 45% self-locking
differentialALL062 Adjustable Bucket linkALL063 Adjustable Bucket link with lifting
hookALL072 Automatic greasing for turretALL082 Air conditioning systemALL092 2° and 3° arm synchronizationALL093 Pedal to Lever Inversion control ALL102 2° Auxiliary hydraulic lineALL112 Working brakeALL132 Working elevating platformALL133 Trenching deviceOPT001 Central outriggersOPT003 Engine case protectionOPT004 Fuel charge pumpOPT005 Kit mudguardsOPT006 Radio/cd/mp3 PlayerOPT007 Radio/cd/mp3 Player + USB and
bluetoothOPT009 Directional drill/ mixing bucket
predispositionOPT010 Highlight led beacon (not for road
circulation)OPT011 Led Working lightOPT012 Auxiliary hydraulic line for hammer
return
top related